Staging: strip: delete the driver

[linux/fpc-iii.git] / drivers / s390 / crypto / zcrypt_pcica.c

/*
 *  linux/drivers/s390/crypto/zcrypt_pcica.c
 *
 *  zcrypt 2.1.0
 *
 *  Copyright (C)  2001, 2006 IBM Corporation
 *  Author(s): Robert Burroughs
 *             Eric Rossman (edrossma@us.ibm.com)
 *
 *  Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
 *  Major cleanup & driver split: Martin Schwidefsky <schwidefsky@de.ibm.com>
 *                                Ralph Wuerthner <rwuerthn@de.ibm.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>

#include "ap_bus.h"
#include "zcrypt_api.h"
#include "zcrypt_error.h"
#include "zcrypt_pcica.h"

#define PCICA_MIN_MOD_SIZE        1     /*    8 bits    */
#define PCICA_MAX_MOD_SIZE      256     /* 2048 bits    */

#define PCICA_SPEED_RATING      2800

#define PCICA_MAX_MESSAGE_SIZE  0x3a0   /* sizeof(struct type4_lcr)          */
#define PCICA_MAX_RESPONSE_SIZE 0x110   /* max outputdatalength + type80_hdr */

#define PCICA_CLEANUP_TIME      (15*HZ)

static struct ap_device_id zcrypt_pcica_ids[] = {
        { AP_DEVICE(AP_DEVICE_TYPE_PCICA) },
        { /* end of list */ },
};

#ifndef CONFIG_ZCRYPT_MONOLITHIC
MODULE_DEVICE_TABLE(ap, zcrypt_pcica_ids);
MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("PCICA Cryptographic Coprocessor device driver, "
                   "Copyright 2001, 2006 IBM Corporation");
MODULE_LICENSE("GPL");
#endif

static int zcrypt_pcica_probe(struct ap_device *ap_dev);
static void zcrypt_pcica_remove(struct ap_device *ap_dev);
static void zcrypt_pcica_receive(struct ap_device *, struct ap_message *,
                                 struct ap_message *);

static struct ap_driver zcrypt_pcica_driver = {
        .probe = zcrypt_pcica_probe,
        .remove = zcrypt_pcica_remove,
        .receive = zcrypt_pcica_receive,
        .ids = zcrypt_pcica_ids,
        .request_timeout = PCICA_CLEANUP_TIME,
};

/**
 * Convert a ICAMEX message to a type4 MEX message.
 *
 * @zdev: crypto device pointer
 * @zreq: crypto request pointer
 * @mex: pointer to user input data
 *
 * Returns 0 on success or -EFAULT.
 */
static int ICAMEX_msg_to_type4MEX_msg(struct zcrypt_device *zdev,
                                      struct ap_message *ap_msg,
                                      struct ica_rsa_modexpo *mex)
{
        unsigned char *modulus, *exponent, *message;
        int mod_len;

        mod_len = mex->inputdatalength;

        if (mod_len <= 128) {
                struct type4_sme *sme = ap_msg->message;
                memset(sme, 0, sizeof(*sme));
                ap_msg->length = sizeof(*sme);
                sme->header.msg_fmt = TYPE4_SME_FMT;
                sme->header.msg_len = sizeof(*sme);
                sme->header.msg_type_code = TYPE4_TYPE_CODE;
                sme->header.request_code = TYPE4_REQU_CODE;
                modulus = sme->modulus + sizeof(sme->modulus) - mod_len;
                exponent = sme->exponent + sizeof(sme->exponent) - mod_len;
                message = sme->message + sizeof(sme->message) - mod_len;
        } else {
                struct type4_lme *lme = ap_msg->message;
                memset(lme, 0, sizeof(*lme));
                ap_msg->length = sizeof(*lme);
                lme->header.msg_fmt = TYPE4_LME_FMT;
                lme->header.msg_len = sizeof(*lme);
                lme->header.msg_type_code = TYPE4_TYPE_CODE;
                lme->header.request_code = TYPE4_REQU_CODE;
                modulus = lme->modulus + sizeof(lme->modulus) - mod_len;
                exponent = lme->exponent + sizeof(lme->exponent) - mod_len;
                message = lme->message + sizeof(lme->message) - mod_len;
        }

        if (copy_from_user(modulus, mex->n_modulus, mod_len) ||
            copy_from_user(exponent, mex->b_key, mod_len) ||
            copy_from_user(message, mex->inputdata, mod_len))
                return -EFAULT;
        return 0;
}

/**
 * Convert a ICACRT message to a type4 CRT message.
 *
 * @zdev: crypto device pointer
 * @zreq: crypto request pointer
 * @crt: pointer to user input data
 *
 * Returns 0 on success or -EFAULT.
 */
static int ICACRT_msg_to_type4CRT_msg(struct zcrypt_device *zdev,
                                      struct ap_message *ap_msg,
                                      struct ica_rsa_modexpo_crt *crt)
{
        unsigned char *p, *q, *dp, *dq, *u, *inp;
        int mod_len, short_len, long_len;

        mod_len = crt->inputdatalength;
        short_len = mod_len / 2;
        long_len = mod_len / 2 + 8;

        if (mod_len <= 128) {
                struct type4_scr *scr = ap_msg->message;
                memset(scr, 0, sizeof(*scr));
                ap_msg->length = sizeof(*scr);
                scr->header.msg_type_code = TYPE4_TYPE_CODE;
                scr->header.request_code = TYPE4_REQU_CODE;
                scr->header.msg_fmt = TYPE4_SCR_FMT;
                scr->header.msg_len = sizeof(*scr);
                p = scr->p + sizeof(scr->p) - long_len;
                q = scr->q + sizeof(scr->q) - short_len;
                dp = scr->dp + sizeof(scr->dp) - long_len;
                dq = scr->dq + sizeof(scr->dq) - short_len;
                u = scr->u + sizeof(scr->u) - long_len;
                inp = scr->message + sizeof(scr->message) - mod_len;
        } else {
                struct type4_lcr *lcr = ap_msg->message;
                memset(lcr, 0, sizeof(*lcr));
                ap_msg->length = sizeof(*lcr);
                lcr->header.msg_type_code = TYPE4_TYPE_CODE;
                lcr->header.request_code = TYPE4_REQU_CODE;
                lcr->header.msg_fmt = TYPE4_LCR_FMT;
                lcr->header.msg_len = sizeof(*lcr);
                p = lcr->p + sizeof(lcr->p) - long_len;
                q = lcr->q + sizeof(lcr->q) - short_len;
                dp = lcr->dp + sizeof(lcr->dp) - long_len;
                dq = lcr->dq + sizeof(lcr->dq) - short_len;
                u = lcr->u + sizeof(lcr->u) - long_len;
                inp = lcr->message + sizeof(lcr->message) - mod_len;
        }

        if (copy_from_user(p, crt->np_prime, long_len) ||
            copy_from_user(q, crt->nq_prime, short_len) ||
            copy_from_user(dp, crt->bp_key, long_len) ||
            copy_from_user(dq, crt->bq_key, short_len) ||
            copy_from_user(u, crt->u_mult_inv, long_len) ||
            copy_from_user(inp, crt->inputdata, mod_len))
                return -EFAULT;
        return 0;
}

/**
 * Copy results from a type 84 reply message back to user space.
 *
 * @zdev: crypto device pointer
 * @reply: reply AP message.
 * @data: pointer to user output data
 * @length: size of user output data
 *
 * Returns 0 on success or -EFAULT.
 */
static int convert_type84(struct zcrypt_device *zdev,
                          struct ap_message *reply,
                          char __user *outputdata,
                          unsigned int outputdatalength)
{
        struct type84_hdr *t84h = reply->message;
        char *data;

        if (t84h->len < sizeof(*t84h) + outputdatalength) {
                /* The result is too short, the PCICA card may not do that.. */
                zdev->online = 0;
                return -EAGAIN; /* repeat the request on a different device. */
        }
        BUG_ON(t84h->len > PCICA_MAX_RESPONSE_SIZE);
        data = reply->message + t84h->len - outputdatalength;
        if (copy_to_user(outputdata, data, outputdatalength))
                return -EFAULT;
        return 0;
}

static int convert_response(struct zcrypt_device *zdev,
                            struct ap_message *reply,
                            char __user *outputdata,
                            unsigned int outputdatalength)
{
        /* Response type byte is the second byte in the response. */
        switch (((unsigned char *) reply->message)[1]) {
        case TYPE82_RSP_CODE:
        case TYPE88_RSP_CODE:
                return convert_error(zdev, reply);
        case TYPE84_RSP_CODE:
                return convert_type84(zdev, reply,
                                      outputdata, outputdatalength);
        default: /* Unknown response type, this should NEVER EVER happen */
                zdev->online = 0;
                return -EAGAIN; /* repeat the request on a different device. */
        }
}

/**
 * This function is called from the AP bus code after a crypto request
 * "msg" has finished with the reply message "reply".
 * It is called from tasklet context.
 * @ap_dev: pointer to the AP device
 * @msg: pointer to the AP message
 * @reply: pointer to the AP reply message
 */
static void zcrypt_pcica_receive(struct ap_device *ap_dev,
                                 struct ap_message *msg,
                                 struct ap_message *reply)
{
        static struct error_hdr error_reply = {
                .type = TYPE82_RSP_CODE,
                .reply_code = REP82_ERROR_MACHINE_FAILURE,
        };
        struct type84_hdr *t84h;
        int length;

        /* Copy the reply message to the request message buffer. */
        if (IS_ERR(reply)) {
                memcpy(msg->message, &error_reply, sizeof(error_reply));
                goto out;
        }
        t84h = reply->message;
        if (t84h->code == TYPE84_RSP_CODE) {
                length = min(PCICA_MAX_RESPONSE_SIZE, (int) t84h->len);
                memcpy(msg->message, reply->message, length);
        } else
                memcpy(msg->message, reply->message, sizeof error_reply);
out:
        complete((struct completion *) msg->private);
}

static atomic_t zcrypt_step = ATOMIC_INIT(0);

/**
 * The request distributor calls this function if it picked the PCICA
 * device to handle a modexpo request.
 * @zdev: pointer to zcrypt_device structure that identifies the
 *        PCICA device to the request distributor
 * @mex: pointer to the modexpo request buffer
 */
static long zcrypt_pcica_modexpo(struct zcrypt_device *zdev,
                                 struct ica_rsa_modexpo *mex)
{
        struct ap_message ap_msg;
        struct completion work;
        int rc;

        ap_init_message(&ap_msg);
        ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
        if (!ap_msg.message)
                return -ENOMEM;
        ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
                                atomic_inc_return(&zcrypt_step);
        ap_msg.private = &work;
        rc = ICAMEX_msg_to_type4MEX_msg(zdev, &ap_msg, mex);
        if (rc)
                goto out_free;
        init_completion(&work);
        ap_queue_message(zdev->ap_dev, &ap_msg);
        rc = wait_for_completion_interruptible(&work);
        if (rc == 0)
                rc = convert_response(zdev, &ap_msg, mex->outputdata,
                                      mex->outputdatalength);
        else
                /* Signal pending. */
                ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
        kfree(ap_msg.message);
        return rc;
}

/**
 * The request distributor calls this function if it picked the PCICA
 * device to handle a modexpo_crt request.
 * @zdev: pointer to zcrypt_device structure that identifies the
 *        PCICA device to the request distributor
 * @crt: pointer to the modexpoc_crt request buffer
 */
static long zcrypt_pcica_modexpo_crt(struct zcrypt_device *zdev,
                                     struct ica_rsa_modexpo_crt *crt)
{
        struct ap_message ap_msg;
        struct completion work;
        int rc;

        ap_init_message(&ap_msg);
        ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
        if (!ap_msg.message)
                return -ENOMEM;
        ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
                                atomic_inc_return(&zcrypt_step);
        ap_msg.private = &work;
        rc = ICACRT_msg_to_type4CRT_msg(zdev, &ap_msg, crt);
        if (rc)
                goto out_free;
        init_completion(&work);
        ap_queue_message(zdev->ap_dev, &ap_msg);
        rc = wait_for_completion_interruptible(&work);
        if (rc == 0)
                rc = convert_response(zdev, &ap_msg, crt->outputdata,
                                      crt->outputdatalength);
        else
                /* Signal pending. */
                ap_cancel_message(zdev->ap_dev, &ap_msg);
out_free:
        kfree(ap_msg.message);
        return rc;
}

/**
 * The crypto operations for a PCICA card.
 */
static struct zcrypt_ops zcrypt_pcica_ops = {
        .rsa_modexpo = zcrypt_pcica_modexpo,
        .rsa_modexpo_crt = zcrypt_pcica_modexpo_crt,
};

/**
 * Probe function for PCICA cards. It always accepts the AP device
 * since the bus_match already checked the hardware type.
 * @ap_dev: pointer to the AP device.
 */
static int zcrypt_pcica_probe(struct ap_device *ap_dev)
{
        struct zcrypt_device *zdev;
        int rc;

        zdev = zcrypt_device_alloc(PCICA_MAX_RESPONSE_SIZE);
        if (!zdev)
                return -ENOMEM;
        zdev->ap_dev = ap_dev;
        zdev->ops = &zcrypt_pcica_ops;
        zdev->online = 1;
        zdev->user_space_type = ZCRYPT_PCICA;
        zdev->type_string = "PCICA";
        zdev->min_mod_size = PCICA_MIN_MOD_SIZE;
        zdev->max_mod_size = PCICA_MAX_MOD_SIZE;
        zdev->speed_rating = PCICA_SPEED_RATING;
        ap_dev->reply = &zdev->reply;
        ap_dev->private = zdev;
        rc = zcrypt_device_register(zdev);
        if (rc)
                goto out_free;
        return 0;

out_free:
        ap_dev->private = NULL;
        zcrypt_device_free(zdev);
        return rc;
}

/**
 * This is called to remove the extended PCICA driver information
 * if an AP device is removed.
 */
static void zcrypt_pcica_remove(struct ap_device *ap_dev)
{
        struct zcrypt_device *zdev = ap_dev->private;

        zcrypt_device_unregister(zdev);
}

int __init zcrypt_pcica_init(void)
{
        return ap_driver_register(&zcrypt_pcica_driver, THIS_MODULE, "pcica");
}

void zcrypt_pcica_exit(void)
{
        ap_driver_unregister(&zcrypt_pcica_driver);
}

#ifndef CONFIG_ZCRYPT_MONOLITHIC
module_init(zcrypt_pcica_init);
module_exit(zcrypt_pcica_exit);
#endif