2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved.
4 * Copyright(c) 2008 Mike Christie
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 * Maintained at www.Open-FCoE.org
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
38 #include <scsi/fc/fc_fc2.h>
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
45 struct kmem_cache
*scsi_pkt_cachep
;
47 /* SRB state definitions */
48 #define FC_SRB_FREE 0 /* cmd is free */
49 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */
50 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */
51 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */
52 #define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */
53 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
54 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
57 #define FC_SRB_READ (1 << 1)
58 #define FC_SRB_WRITE (1 << 0)
61 * The SCp.ptr should be tested and set under the host lock. NULL indicates
62 * that the command has been retruned to the scsi layer.
64 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
65 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
66 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
67 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
68 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
71 * struct fc_fcp_internal - FCP layer internal data
72 * @scsi_pkt_pool: Memory pool to draw FCP packets from
73 * @scsi_queue_lock: Protects the scsi_pkt_queue
74 * @scsi_pkt_queue: Current FCP packets
75 * @last_can_queue_ramp_down_time: ramp down time
76 * @last_can_queue_ramp_up_time: ramp up time
77 * @max_can_queue: max can_queue size
79 struct fc_fcp_internal
{
80 mempool_t
*scsi_pkt_pool
;
81 spinlock_t scsi_queue_lock
;
82 struct list_head scsi_pkt_queue
;
83 unsigned long last_can_queue_ramp_down_time
;
84 unsigned long last_can_queue_ramp_up_time
;
88 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
92 * FC scsi I/O related functions
94 static void fc_fcp_recv_data(struct fc_fcp_pkt
*, struct fc_frame
*);
95 static void fc_fcp_recv(struct fc_seq
*, struct fc_frame
*, void *);
96 static void fc_fcp_resp(struct fc_fcp_pkt
*, struct fc_frame
*);
97 static void fc_fcp_complete_locked(struct fc_fcp_pkt
*);
98 static void fc_tm_done(struct fc_seq
*, struct fc_frame
*, void *);
99 static void fc_fcp_error(struct fc_fcp_pkt
*, struct fc_frame
*);
100 static void fc_timeout_error(struct fc_fcp_pkt
*);
101 static void fc_fcp_timeout(unsigned long);
102 static void fc_fcp_rec(struct fc_fcp_pkt
*);
103 static void fc_fcp_rec_error(struct fc_fcp_pkt
*, struct fc_frame
*);
104 static void fc_fcp_rec_resp(struct fc_seq
*, struct fc_frame
*, void *);
105 static void fc_io_compl(struct fc_fcp_pkt
*);
107 static void fc_fcp_srr(struct fc_fcp_pkt
*, enum fc_rctl
, u32
);
108 static void fc_fcp_srr_resp(struct fc_seq
*, struct fc_frame
*, void *);
109 static void fc_fcp_srr_error(struct fc_fcp_pkt
*, struct fc_frame
*);
112 * command status codes
114 #define FC_COMPLETE 0
115 #define FC_CMD_ABORTED 1
116 #define FC_CMD_RESET 2
117 #define FC_CMD_PLOGO 3
119 #define FC_TRANS_ERR 5
120 #define FC_DATA_OVRRUN 6
121 #define FC_DATA_UNDRUN 7
123 #define FC_HRD_ERROR 9
124 #define FC_CMD_TIME_OUT 10
127 * Error recovery timeout values.
129 #define FC_SCSI_ER_TIMEOUT (10 * HZ)
130 #define FC_SCSI_TM_TOV (10 * HZ)
131 #define FC_SCSI_REC_TOV (2 * HZ)
132 #define FC_HOST_RESET_TIMEOUT (30 * HZ)
133 #define FC_CAN_QUEUE_PERIOD (60 * HZ)
135 #define FC_MAX_ERROR_CNT 5
136 #define FC_MAX_RECOV_RETRY 3
138 #define FC_FCP_DFLT_QUEUE_DEPTH 32
141 * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
142 * @lport: The local port that the FCP packet is for
143 * @gfp: GFP flags for allocation
145 * Return value: fcp_pkt structure or null on allocation failure.
146 * Context: Can be called from process context, no lock is required.
148 static struct fc_fcp_pkt
*fc_fcp_pkt_alloc(struct fc_lport
*lport
, gfp_t gfp
)
150 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lport
);
151 struct fc_fcp_pkt
*fsp
;
153 fsp
= mempool_alloc(si
->scsi_pkt_pool
, gfp
);
155 memset(fsp
, 0, sizeof(*fsp
));
157 atomic_set(&fsp
->ref_cnt
, 1);
158 init_timer(&fsp
->timer
);
159 INIT_LIST_HEAD(&fsp
->list
);
160 spin_lock_init(&fsp
->scsi_pkt_lock
);
166 * fc_fcp_pkt_release() - Release hold on a fcp_pkt
167 * @fsp: The FCP packet to be released
169 * Context: Can be called from process or interrupt context,
170 * no lock is required.
172 static void fc_fcp_pkt_release(struct fc_fcp_pkt
*fsp
)
174 if (atomic_dec_and_test(&fsp
->ref_cnt
)) {
175 struct fc_fcp_internal
*si
= fc_get_scsi_internal(fsp
->lp
);
177 mempool_free(fsp
, si
->scsi_pkt_pool
);
182 * fc_fcp_pkt_hold() - Hold a fcp_pkt
183 * @fsp: The FCP packet to be held
185 static void fc_fcp_pkt_hold(struct fc_fcp_pkt
*fsp
)
187 atomic_inc(&fsp
->ref_cnt
);
191 * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
192 * @seq: The sequence that the FCP packet is on (required by destructor API)
193 * @fsp: The FCP packet to be released
195 * This routine is called by a destructor callback in the exch_seq_send()
196 * routine of the libfc Transport Template. The 'struct fc_seq' is a required
197 * argument even though it is not used by this routine.
199 * Context: No locking required.
201 static void fc_fcp_pkt_destroy(struct fc_seq
*seq
, void *fsp
)
203 fc_fcp_pkt_release(fsp
);
207 * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
208 * @fsp: The FCP packet to be locked and incremented
210 * We should only return error if we return a command to SCSI-ml before
211 * getting a response. This can happen in cases where we send a abort, but
212 * do not wait for the response and the abort and command can be passing
213 * each other on the wire/network-layer.
215 * Note: this function locks the packet and gets a reference to allow
216 * callers to call the completion function while the lock is held and
217 * not have to worry about the packets refcount.
219 * TODO: Maybe we should just have callers grab/release the lock and
220 * have a function that they call to verify the fsp and grab a ref if
223 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt
*fsp
)
225 spin_lock_bh(&fsp
->scsi_pkt_lock
);
226 if (fsp
->state
& FC_SRB_COMPL
) {
227 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
231 fc_fcp_pkt_hold(fsp
);
236 * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
238 * @fsp: The FCP packet to be unlocked and decremented
240 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt
*fsp
)
242 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
243 fc_fcp_pkt_release(fsp
);
247 * fc_fcp_timer_set() - Start a timer for a fcp_pkt
248 * @fsp: The FCP packet to start a timer for
249 * @delay: The timeout period for the timer
251 static void fc_fcp_timer_set(struct fc_fcp_pkt
*fsp
, unsigned long delay
)
253 if (!(fsp
->state
& FC_SRB_COMPL
))
254 mod_timer(&fsp
->timer
, jiffies
+ delay
);
258 * fc_fcp_send_abort() - Send an abort for exchanges associated with a
260 * @fsp: The FCP packet to abort exchanges on
262 static int fc_fcp_send_abort(struct fc_fcp_pkt
*fsp
)
267 fsp
->state
|= FC_SRB_ABORT_PENDING
;
268 return fsp
->lp
->tt
.seq_exch_abort(fsp
->seq_ptr
, 0);
272 * fc_fcp_retry_cmd() - Retry a fcp_pkt
273 * @fsp: The FCP packet to be retried
275 * Sets the status code to be FC_ERROR and then calls
276 * fc_fcp_complete_locked() which in turn calls fc_io_compl().
277 * fc_io_compl() will notify the SCSI-ml that the I/O is done.
278 * The SCSI-ml will retry the command.
280 static void fc_fcp_retry_cmd(struct fc_fcp_pkt
*fsp
)
283 fsp
->lp
->tt
.exch_done(fsp
->seq_ptr
);
287 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
289 fsp
->status_code
= FC_ERROR
;
290 fc_fcp_complete_locked(fsp
);
294 * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
295 * @fsp: The FCP packet that will manage the DDP frames
296 * @xid: The XID that will be used for the DDP exchange
298 void fc_fcp_ddp_setup(struct fc_fcp_pkt
*fsp
, u16 xid
)
300 struct fc_lport
*lport
;
303 if ((fsp
->req_flags
& FC_SRB_READ
) &&
304 (lport
->lro_enabled
) && (lport
->tt
.ddp_setup
)) {
305 if (lport
->tt
.ddp_setup(lport
, xid
, scsi_sglist(fsp
->cmd
),
306 scsi_sg_count(fsp
->cmd
)))
312 * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
313 * DDP related resources for a fcp_pkt
314 * @fsp: The FCP packet that DDP had been used on
316 static void fc_fcp_ddp_done(struct fc_fcp_pkt
*fsp
)
318 struct fc_lport
*lport
;
323 if (fsp
->xfer_ddp
== FC_XID_UNKNOWN
)
327 if (lport
->tt
.ddp_done
) {
328 fsp
->xfer_len
= lport
->tt
.ddp_done(lport
, fsp
->xfer_ddp
);
329 fsp
->xfer_ddp
= FC_XID_UNKNOWN
;
334 * fc_fcp_can_queue_ramp_up() - increases can_queue
335 * @lport: lport to ramp up can_queue
337 * Locking notes: Called with Scsi_Host lock held
339 static void fc_fcp_can_queue_ramp_up(struct fc_lport
*lport
)
341 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lport
);
344 if (si
->last_can_queue_ramp_up_time
&&
345 (time_before(jiffies
, si
->last_can_queue_ramp_up_time
+
346 FC_CAN_QUEUE_PERIOD
)))
349 if (time_before(jiffies
, si
->last_can_queue_ramp_down_time
+
350 FC_CAN_QUEUE_PERIOD
))
353 si
->last_can_queue_ramp_up_time
= jiffies
;
355 can_queue
= lport
->host
->can_queue
<< 1;
356 if (can_queue
>= si
->max_can_queue
) {
357 can_queue
= si
->max_can_queue
;
358 si
->last_can_queue_ramp_down_time
= 0;
360 lport
->host
->can_queue
= can_queue
;
361 shost_printk(KERN_ERR
, lport
->host
, "libfc: increased "
362 "can_queue to %d.\n", can_queue
);
366 * fc_fcp_can_queue_ramp_down() - reduces can_queue
367 * @lport: lport to reduce can_queue
369 * If we are getting memory allocation failures, then we may
370 * be trying to execute too many commands. We let the running
371 * commands complete or timeout, then try again with a reduced
372 * can_queue. Eventually we will hit the point where we run
373 * on all reserved structs.
375 * Locking notes: Called with Scsi_Host lock held
377 static void fc_fcp_can_queue_ramp_down(struct fc_lport
*lport
)
379 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lport
);
382 if (si
->last_can_queue_ramp_down_time
&&
383 (time_before(jiffies
, si
->last_can_queue_ramp_down_time
+
384 FC_CAN_QUEUE_PERIOD
)))
387 si
->last_can_queue_ramp_down_time
= jiffies
;
389 can_queue
= lport
->host
->can_queue
;
393 lport
->host
->can_queue
= can_queue
;
394 shost_printk(KERN_ERR
, lport
->host
, "libfc: Could not allocate frame.\n"
395 "Reducing can_queue to %d.\n", can_queue
);
399 * fc_fcp_frame_alloc() - Allocates fc_frame structure and buffer.
400 * @lport: fc lport struct
401 * @len: payload length
403 * Allocates fc_frame structure and buffer but if fails to allocate
404 * then reduce can_queue.
406 static inline struct fc_frame
*fc_fcp_frame_alloc(struct fc_lport
*lport
,
412 fp
= fc_frame_alloc(lport
, len
);
417 spin_lock_irqsave(lport
->host
->host_lock
, flags
);
418 fc_fcp_can_queue_ramp_down(lport
);
419 spin_unlock_irqrestore(lport
->host
->host_lock
, flags
);
424 * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
425 * @fsp: The FCP packet the data is on
426 * @fp: The data frame
428 static void fc_fcp_recv_data(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
430 struct scsi_cmnd
*sc
= fsp
->cmd
;
431 struct fc_lport
*lport
= fsp
->lp
;
432 struct fcoe_dev_stats
*stats
;
433 struct fc_frame_header
*fh
;
440 struct scatterlist
*sg
;
443 fh
= fc_frame_header_get(fp
);
444 offset
= ntohl(fh
->fh_parm_offset
);
445 start_offset
= offset
;
446 len
= fr_len(fp
) - sizeof(*fh
);
447 buf
= fc_frame_payload_get(fp
, 0);
449 /* if this I/O is ddped, update xfer len */
450 fc_fcp_ddp_done(fsp
);
452 if (offset
+ len
> fsp
->data_len
) {
453 /* this should never happen */
454 if ((fr_flags(fp
) & FCPHF_CRC_UNCHECKED
) &&
455 fc_frame_crc_check(fp
))
457 FC_FCP_DBG(fsp
, "data received past end. len %zx offset %zx "
458 "data_len %x\n", len
, offset
, fsp
->data_len
);
459 fc_fcp_retry_cmd(fsp
);
462 if (offset
!= fsp
->xfer_len
)
463 fsp
->state
|= FC_SRB_DISCONTIG
;
465 sg
= scsi_sglist(sc
);
466 nents
= scsi_sg_count(sc
);
468 if (!(fr_flags(fp
) & FCPHF_CRC_UNCHECKED
)) {
469 copy_len
= fc_copy_buffer_to_sglist(buf
, len
, sg
, &nents
,
470 &offset
, KM_SOFTIRQ0
, NULL
);
472 crc
= crc32(~0, (u8
*) fh
, sizeof(*fh
));
473 copy_len
= fc_copy_buffer_to_sglist(buf
, len
, sg
, &nents
,
474 &offset
, KM_SOFTIRQ0
, &crc
);
475 buf
= fc_frame_payload_get(fp
, 0);
477 crc
= crc32(crc
, buf
+ len
, 4 - (len
% 4));
479 if (~crc
!= le32_to_cpu(fr_crc(fp
))) {
481 stats
= fc_lport_get_stats(lport
);
482 stats
->ErrorFrames
++;
483 /* FIXME - per cpu count, not total count! */
484 if (stats
->InvalidCRCCount
++ < 5)
485 printk(KERN_WARNING
"libfc: CRC error on data "
486 "frame for port (%6x)\n",
487 fc_host_port_id(lport
->host
));
489 * Assume the frame is total garbage.
490 * We may have copied it over the good part
492 * If so, we need to retry the entire operation.
493 * Otherwise, ignore it.
495 if (fsp
->state
& FC_SRB_DISCONTIG
)
496 fc_fcp_retry_cmd(fsp
);
501 if (fsp
->xfer_contig_end
== start_offset
)
502 fsp
->xfer_contig_end
+= copy_len
;
503 fsp
->xfer_len
+= copy_len
;
506 * In the very rare event that this data arrived after the response
507 * and completes the transfer, call the completion handler.
509 if (unlikely(fsp
->state
& FC_SRB_RCV_STATUS
) &&
510 fsp
->xfer_len
== fsp
->data_len
- fsp
->scsi_resid
)
511 fc_fcp_complete_locked(fsp
);
515 * fc_fcp_send_data() - Send SCSI data to a target
516 * @fsp: The FCP packet the data is on
517 * @sp: The sequence the data is to be sent on
518 * @offset: The starting offset for this data request
519 * @seq_blen: The burst length for this data request
521 * Called after receiving a Transfer Ready data descriptor.
522 * If the LLD is capable of sequence offload then send down the
523 * seq_blen amount of data in single frame, otherwise send
524 * multiple frames of the maximum frame payload supported by
527 static int fc_fcp_send_data(struct fc_fcp_pkt
*fsp
, struct fc_seq
*seq
,
528 size_t offset
, size_t seq_blen
)
531 struct scsi_cmnd
*sc
;
532 struct scatterlist
*sg
;
533 struct fc_frame
*fp
= NULL
;
534 struct fc_lport
*lport
= fsp
->lp
;
540 size_t frame_offset
, fh_parm_offset
;
545 int using_sg
= lport
->sg_supp
;
548 WARN_ON(seq_blen
<= 0);
549 if (unlikely(offset
+ seq_blen
> fsp
->data_len
)) {
550 /* this should never happen */
551 FC_FCP_DBG(fsp
, "xfer-ready past end. seq_blen %zx "
552 "offset %zx\n", seq_blen
, offset
);
553 fc_fcp_send_abort(fsp
);
555 } else if (offset
!= fsp
->xfer_len
) {
556 /* Out of Order Data Request - no problem, but unexpected. */
557 FC_FCP_DBG(fsp
, "xfer-ready non-contiguous. "
558 "seq_blen %zx offset %zx\n", seq_blen
, offset
);
562 * if LLD is capable of seq_offload then set transport
563 * burst length (t_blen) to seq_blen, otherwise set t_blen
564 * to max FC frame payload previously set in fsp->max_payload.
566 t_blen
= fsp
->max_payload
;
567 if (lport
->seq_offload
) {
568 t_blen
= min(seq_blen
, (size_t)lport
->lso_max
);
569 FC_FCP_DBG(fsp
, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
570 fsp
, seq_blen
, lport
->lso_max
, t_blen
);
573 WARN_ON(t_blen
< FC_MIN_MAX_PAYLOAD
);
575 t_blen
&= ~(512 - 1); /* round down to block size */
576 WARN_ON(t_blen
< FC_MIN_MAX_PAYLOAD
); /* won't go below 256 */
579 remaining
= seq_blen
;
580 fh_parm_offset
= frame_offset
= offset
;
582 seq
= lport
->tt
.seq_start_next(seq
);
583 f_ctl
= FC_FC_REL_OFF
;
586 sg
= scsi_sglist(sc
);
588 while (remaining
> 0 && sg
) {
589 if (offset
>= sg
->length
) {
590 offset
-= sg
->length
;
595 tlen
= min(t_blen
, remaining
);
598 * TODO. Temporary workaround. fc_seq_send() can't
599 * handle odd lengths in non-linear skbs.
600 * This will be the final fragment only.
604 fp
= fc_frame_alloc(lport
, using_sg
? 0 : tlen
);
608 data
= fc_frame_header_get(fp
) + 1;
609 fh_parm_offset
= frame_offset
;
610 fr_max_payload(fp
) = fsp
->max_payload
;
613 off
= offset
+ sg
->offset
;
614 sg_bytes
= min(tlen
, sg
->length
- offset
);
615 sg_bytes
= min(sg_bytes
,
616 (size_t) (PAGE_SIZE
- (off
& ~PAGE_MASK
)));
617 page
= sg_page(sg
) + (off
>> PAGE_SHIFT
);
620 skb_fill_page_desc(fp_skb(fp
),
621 skb_shinfo(fp_skb(fp
))->nr_frags
,
622 page
, off
& ~PAGE_MASK
, sg_bytes
);
623 fp_skb(fp
)->data_len
+= sg_bytes
;
624 fr_len(fp
) += sg_bytes
;
625 fp_skb(fp
)->truesize
+= PAGE_SIZE
;
628 * The scatterlist item may be bigger than PAGE_SIZE,
629 * but we must not cross pages inside the kmap.
631 page_addr
= kmap_atomic(page
, KM_SOFTIRQ0
);
632 memcpy(data
, (char *)page_addr
+ (off
& ~PAGE_MASK
),
634 kunmap_atomic(page_addr
, KM_SOFTIRQ0
);
638 frame_offset
+= sg_bytes
;
640 remaining
-= sg_bytes
;
642 if ((skb_shinfo(fp_skb(fp
))->nr_frags
< FC_FRAME_SG_LEN
) &&
647 * Send sequence with transfer sequence initiative in case
648 * this is last FCP frame of the sequence.
651 f_ctl
|= FC_FC_SEQ_INIT
| FC_FC_END_SEQ
;
653 ep
= fc_seq_exch(seq
);
654 fc_fill_fc_hdr(fp
, FC_RCTL_DD_SOL_DATA
, ep
->did
, ep
->sid
,
655 FC_TYPE_FCP
, f_ctl
, fh_parm_offset
);
658 * send fragment using for a sequence.
660 error
= lport
->tt
.seq_send(lport
, seq
, fp
);
662 WARN_ON(1); /* send error should be rare */
663 fc_fcp_retry_cmd(fsp
);
668 fsp
->xfer_len
+= seq_blen
; /* premature count? */
673 * fc_fcp_abts_resp() - Send an ABTS response
674 * @fsp: The FCP packet that is being aborted
675 * @fp: The response frame
677 static void fc_fcp_abts_resp(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
680 struct fc_ba_rjt
*brp
;
681 struct fc_frame_header
*fh
;
683 fh
= fc_frame_header_get(fp
);
684 switch (fh
->fh_r_ctl
) {
688 brp
= fc_frame_payload_get(fp
, sizeof(*brp
));
689 if (brp
&& brp
->br_reason
== FC_BA_RJT_LOG_ERR
)
694 * we will let the command timeout
695 * and scsi-ml recover in this case,
696 * therefore cleared the ba_done flag.
702 fsp
->state
|= FC_SRB_ABORTED
;
703 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
705 if (fsp
->wait_for_comp
)
706 complete(&fsp
->tm_done
);
708 fc_fcp_complete_locked(fsp
);
713 * fc_fcp_recv() - Reveive an FCP frame
714 * @seq: The sequence the frame is on
715 * @fp: The received frame
716 * @arg: The related FCP packet
718 * Context: Called from Soft IRQ context. Can not be called
719 * holding the FCP packet list lock.
721 static void fc_fcp_recv(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
723 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)arg
;
724 struct fc_lport
*lport
= fsp
->lp
;
725 struct fc_frame_header
*fh
;
726 struct fcp_txrdy
*dd
;
731 fc_fcp_error(fsp
, fp
);
735 fh
= fc_frame_header_get(fp
);
736 r_ctl
= fh
->fh_r_ctl
;
738 if (!(lport
->state
& LPORT_ST_READY
))
740 if (fc_fcp_lock_pkt(fsp
))
742 fsp
->last_pkt_time
= jiffies
;
744 if (fh
->fh_type
== FC_TYPE_BLS
) {
745 fc_fcp_abts_resp(fsp
, fp
);
749 if (fsp
->state
& (FC_SRB_ABORTED
| FC_SRB_ABORT_PENDING
))
752 if (r_ctl
== FC_RCTL_DD_DATA_DESC
) {
754 * received XFER RDY from the target
755 * need to send data to the target
757 WARN_ON(fr_flags(fp
) & FCPHF_CRC_UNCHECKED
);
758 dd
= fc_frame_payload_get(fp
, sizeof(*dd
));
761 rc
= fc_fcp_send_data(fsp
, seq
,
762 (size_t) ntohl(dd
->ft_data_ro
),
763 (size_t) ntohl(dd
->ft_burst_len
));
765 seq
->rec_data
= fsp
->xfer_len
;
766 } else if (r_ctl
== FC_RCTL_DD_SOL_DATA
) {
768 * received a DATA frame
769 * next we will copy the data to the system buffer
771 WARN_ON(fr_len(fp
) < sizeof(*fh
)); /* len may be 0 */
772 fc_fcp_recv_data(fsp
, fp
);
773 seq
->rec_data
= fsp
->xfer_contig_end
;
774 } else if (r_ctl
== FC_RCTL_DD_CMD_STATUS
) {
775 WARN_ON(fr_flags(fp
) & FCPHF_CRC_UNCHECKED
);
777 fc_fcp_resp(fsp
, fp
);
779 FC_FCP_DBG(fsp
, "unexpected frame. r_ctl %x\n", r_ctl
);
782 fc_fcp_unlock_pkt(fsp
);
788 * fc_fcp_resp() - Handler for FCP responses
789 * @fsp: The FCP packet the response is for
790 * @fp: The response frame
792 static void fc_fcp_resp(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
794 struct fc_frame_header
*fh
;
795 struct fcp_resp
*fc_rp
;
796 struct fcp_resp_ext
*rp_ex
;
797 struct fcp_resp_rsp_info
*fc_rp_info
;
805 fh
= (struct fc_frame_header
*)fr_hdr(fp
);
806 if (unlikely(plen
< sizeof(*fh
) + sizeof(*fc_rp
)))
809 fc_rp
= (struct fcp_resp
*)(fh
+ 1);
810 fsp
->cdb_status
= fc_rp
->fr_status
;
811 flags
= fc_rp
->fr_flags
;
812 fsp
->scsi_comp_flags
= flags
;
813 expected_len
= fsp
->data_len
;
815 /* if ddp, update xfer len */
816 fc_fcp_ddp_done(fsp
);
818 if (unlikely((flags
& ~FCP_CONF_REQ
) || fc_rp
->fr_status
)) {
819 rp_ex
= (void *)(fc_rp
+ 1);
820 if (flags
& (FCP_RSP_LEN_VAL
| FCP_SNS_LEN_VAL
)) {
821 if (plen
< sizeof(*fc_rp
) + sizeof(*rp_ex
))
823 fc_rp_info
= (struct fcp_resp_rsp_info
*)(rp_ex
+ 1);
824 if (flags
& FCP_RSP_LEN_VAL
) {
825 respl
= ntohl(rp_ex
->fr_rsp_len
);
826 if (respl
!= sizeof(*fc_rp_info
))
828 if (fsp
->wait_for_comp
) {
829 /* Abuse cdb_status for rsp code */
830 fsp
->cdb_status
= fc_rp_info
->rsp_code
;
831 complete(&fsp
->tm_done
);
833 * tmfs will not have any scsi cmd so
840 if (flags
& FCP_SNS_LEN_VAL
) {
841 snsl
= ntohl(rp_ex
->fr_sns_len
);
842 if (snsl
> SCSI_SENSE_BUFFERSIZE
)
843 snsl
= SCSI_SENSE_BUFFERSIZE
;
844 memcpy(fsp
->cmd
->sense_buffer
,
845 (char *)fc_rp_info
+ respl
, snsl
);
848 if (flags
& (FCP_RESID_UNDER
| FCP_RESID_OVER
)) {
849 if (plen
< sizeof(*fc_rp
) + sizeof(rp_ex
->fr_resid
))
851 if (flags
& FCP_RESID_UNDER
) {
852 fsp
->scsi_resid
= ntohl(rp_ex
->fr_resid
);
854 * The cmnd->underflow is the minimum number of
855 * bytes that must be transfered for this
856 * command. Provided a sense condition is not
857 * present, make sure the actual amount
858 * transferred is at least the underflow value
861 if (!(flags
& FCP_SNS_LEN_VAL
) &&
862 (fc_rp
->fr_status
== 0) &&
863 (scsi_bufflen(fsp
->cmd
) -
864 fsp
->scsi_resid
) < fsp
->cmd
->underflow
)
866 expected_len
-= fsp
->scsi_resid
;
868 fsp
->status_code
= FC_ERROR
;
872 fsp
->state
|= FC_SRB_RCV_STATUS
;
875 * Check for missing or extra data frames.
877 if (unlikely(fsp
->xfer_len
!= expected_len
)) {
878 if (fsp
->xfer_len
< expected_len
) {
880 * Some data may be queued locally,
881 * Wait a at least one jiffy to see if it is delivered.
882 * If this expires without data, we may do SRR.
884 fc_fcp_timer_set(fsp
, 2);
887 fsp
->status_code
= FC_DATA_OVRRUN
;
888 FC_FCP_DBG(fsp
, "tgt %6x xfer len %zx greater than expected, "
889 "len %x, data len %x\n",
891 fsp
->xfer_len
, expected_len
, fsp
->data_len
);
893 fc_fcp_complete_locked(fsp
);
897 FC_FCP_DBG(fsp
, "short FCP response. flags 0x%x len %u respl %u "
898 "snsl %u\n", flags
, fr_len(fp
), respl
, snsl
);
900 fsp
->status_code
= FC_ERROR
;
901 fc_fcp_complete_locked(fsp
);
905 * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
907 * @fsp: The FCP packet to be completed
909 * This function may sleep if a timer is pending. The packet lock must be
910 * held, and the host lock must not be held.
912 static void fc_fcp_complete_locked(struct fc_fcp_pkt
*fsp
)
914 struct fc_lport
*lport
= fsp
->lp
;
919 if (fsp
->state
& FC_SRB_ABORT_PENDING
)
922 if (fsp
->state
& FC_SRB_ABORTED
) {
923 if (!fsp
->status_code
)
924 fsp
->status_code
= FC_CMD_ABORTED
;
927 * Test for transport underrun, independent of response
930 if (fsp
->xfer_len
< fsp
->data_len
&& !fsp
->io_status
&&
931 (!(fsp
->scsi_comp_flags
& FCP_RESID_UNDER
) ||
932 fsp
->xfer_len
< fsp
->data_len
- fsp
->scsi_resid
)) {
933 fsp
->status_code
= FC_DATA_UNDRUN
;
941 if (unlikely(fsp
->scsi_comp_flags
& FCP_CONF_REQ
)) {
942 struct fc_frame
*conf_frame
;
945 csp
= lport
->tt
.seq_start_next(seq
);
946 conf_frame
= fc_fcp_frame_alloc(fsp
->lp
, 0);
948 f_ctl
= FC_FC_SEQ_INIT
;
949 f_ctl
|= FC_FC_LAST_SEQ
| FC_FC_END_SEQ
;
950 ep
= fc_seq_exch(seq
);
951 fc_fill_fc_hdr(conf_frame
, FC_RCTL_DD_SOL_CTL
,
953 FC_TYPE_FCP
, f_ctl
, 0);
954 lport
->tt
.seq_send(lport
, csp
, conf_frame
);
957 lport
->tt
.exch_done(seq
);
963 * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
964 * @fsp: The FCP packet whose exchanges should be canceled
965 * @error: The reason for the cancellation
967 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt
*fsp
, int error
)
969 struct fc_lport
*lport
= fsp
->lp
;
972 lport
->tt
.exch_done(fsp
->seq_ptr
);
975 fsp
->status_code
= error
;
979 * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
980 * @lport: The local port whose exchanges should be canceled
981 * @id: The target's ID
983 * @error: The reason for cancellation
985 * If lun or id is -1, they are ignored.
987 static void fc_fcp_cleanup_each_cmd(struct fc_lport
*lport
, unsigned int id
,
988 unsigned int lun
, int error
)
990 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lport
);
991 struct fc_fcp_pkt
*fsp
;
992 struct scsi_cmnd
*sc_cmd
;
995 spin_lock_irqsave(&si
->scsi_queue_lock
, flags
);
997 list_for_each_entry(fsp
, &si
->scsi_pkt_queue
, list
) {
999 if (id
!= -1 && scmd_id(sc_cmd
) != id
)
1002 if (lun
!= -1 && sc_cmd
->device
->lun
!= lun
)
1005 fc_fcp_pkt_hold(fsp
);
1006 spin_unlock_irqrestore(&si
->scsi_queue_lock
, flags
);
1008 if (!fc_fcp_lock_pkt(fsp
)) {
1009 fc_fcp_cleanup_cmd(fsp
, error
);
1011 fc_fcp_unlock_pkt(fsp
);
1014 fc_fcp_pkt_release(fsp
);
1015 spin_lock_irqsave(&si
->scsi_queue_lock
, flags
);
1017 * while we dropped the lock multiple pkts could
1018 * have been released, so we have to start over.
1022 spin_unlock_irqrestore(&si
->scsi_queue_lock
, flags
);
1026 * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1027 * @lport: The local port whose exchanges are to be aborted
1029 static void fc_fcp_abort_io(struct fc_lport
*lport
)
1031 fc_fcp_cleanup_each_cmd(lport
, -1, -1, FC_HRD_ERROR
);
1035 * fc_fcp_pkt_send() - Send a fcp_pkt
1036 * @lport: The local port to send the FCP packet on
1037 * @fsp: The FCP packet to send
1039 * Return: Zero for success and -1 for failure
1040 * Locks: Called without locks held
1042 static int fc_fcp_pkt_send(struct fc_lport
*lport
, struct fc_fcp_pkt
*fsp
)
1044 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lport
);
1045 unsigned long flags
;
1048 fsp
->cmd
->SCp
.ptr
= (char *)fsp
;
1049 fsp
->cdb_cmd
.fc_dl
= htonl(fsp
->data_len
);
1050 fsp
->cdb_cmd
.fc_flags
= fsp
->req_flags
& ~FCP_CFL_LEN_MASK
;
1052 int_to_scsilun(fsp
->cmd
->device
->lun
,
1053 (struct scsi_lun
*)fsp
->cdb_cmd
.fc_lun
);
1054 memcpy(fsp
->cdb_cmd
.fc_cdb
, fsp
->cmd
->cmnd
, fsp
->cmd
->cmd_len
);
1056 spin_lock_irqsave(&si
->scsi_queue_lock
, flags
);
1057 list_add_tail(&fsp
->list
, &si
->scsi_pkt_queue
);
1058 spin_unlock_irqrestore(&si
->scsi_queue_lock
, flags
);
1059 rc
= lport
->tt
.fcp_cmd_send(lport
, fsp
, fc_fcp_recv
);
1061 spin_lock_irqsave(&si
->scsi_queue_lock
, flags
);
1062 list_del(&fsp
->list
);
1063 spin_unlock_irqrestore(&si
->scsi_queue_lock
, flags
);
1070 * fc_fcp_cmd_send() - Send a FCP command
1071 * @lport: The local port to send the command on
1072 * @fsp: The FCP packet the command is on
1073 * @resp: The handler for the response
1075 static int fc_fcp_cmd_send(struct fc_lport
*lport
, struct fc_fcp_pkt
*fsp
,
1076 void (*resp
)(struct fc_seq
*,
1077 struct fc_frame
*fp
,
1080 struct fc_frame
*fp
;
1082 struct fc_rport
*rport
;
1083 struct fc_rport_libfc_priv
*rpriv
;
1084 const size_t len
= sizeof(fsp
->cdb_cmd
);
1087 if (fc_fcp_lock_pkt(fsp
))
1090 fp
= fc_fcp_frame_alloc(lport
, sizeof(fsp
->cdb_cmd
));
1096 memcpy(fc_frame_payload_get(fp
, len
), &fsp
->cdb_cmd
, len
);
1099 fsp
->max_payload
= rport
->maxframe_size
;
1100 rpriv
= rport
->dd_data
;
1102 fc_fill_fc_hdr(fp
, FC_RCTL_DD_UNSOL_CMD
, rport
->port_id
,
1103 fc_host_port_id(rpriv
->local_port
->host
), FC_TYPE_FCP
,
1104 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1106 seq
= lport
->tt
.exch_seq_send(lport
, fp
, resp
, fc_fcp_pkt_destroy
,
1112 fsp
->last_pkt_time
= jiffies
;
1114 fc_fcp_pkt_hold(fsp
); /* hold for fc_fcp_pkt_destroy */
1116 setup_timer(&fsp
->timer
, fc_fcp_timeout
, (unsigned long)fsp
);
1117 fc_fcp_timer_set(fsp
,
1118 (fsp
->tgt_flags
& FC_RP_FLAGS_REC_SUPPORTED
) ?
1119 FC_SCSI_REC_TOV
: FC_SCSI_ER_TIMEOUT
);
1121 fc_fcp_unlock_pkt(fsp
);
1126 * fc_fcp_error() - Handler for FCP layer errors
1127 * @fsp: The FCP packet the error is on
1128 * @fp: The frame that has errored
1130 static void fc_fcp_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1132 int error
= PTR_ERR(fp
);
1134 if (fc_fcp_lock_pkt(fsp
))
1137 if (error
== -FC_EX_CLOSED
) {
1138 fc_fcp_retry_cmd(fsp
);
1143 * clear abort pending, because the lower layer
1144 * decided to force completion.
1146 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
1147 fsp
->status_code
= FC_CMD_PLOGO
;
1148 fc_fcp_complete_locked(fsp
);
1150 fc_fcp_unlock_pkt(fsp
);
1154 * fc_fcp_pkt_abort() - Abort a fcp_pkt
1155 * @fsp: The FCP packet to abort on
1157 * Called to send an abort and then wait for abort completion
1159 static int fc_fcp_pkt_abort(struct fc_fcp_pkt
*fsp
)
1163 if (fc_fcp_send_abort(fsp
))
1166 init_completion(&fsp
->tm_done
);
1167 fsp
->wait_for_comp
= 1;
1169 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1170 rc
= wait_for_completion_timeout(&fsp
->tm_done
, FC_SCSI_TM_TOV
);
1171 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1172 fsp
->wait_for_comp
= 0;
1175 FC_FCP_DBG(fsp
, "target abort cmd failed\n");
1177 } else if (fsp
->state
& FC_SRB_ABORTED
) {
1178 FC_FCP_DBG(fsp
, "target abort cmd passed\n");
1180 fc_fcp_complete_locked(fsp
);
1187 * fc_lun_reset_send() - Send LUN reset command
1188 * @data: The FCP packet that identifies the LUN to be reset
1190 static void fc_lun_reset_send(unsigned long data
)
1192 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)data
;
1193 struct fc_lport
*lport
= fsp
->lp
;
1194 if (lport
->tt
.fcp_cmd_send(lport
, fsp
, fc_tm_done
)) {
1195 if (fsp
->recov_retry
++ >= FC_MAX_RECOV_RETRY
)
1197 if (fc_fcp_lock_pkt(fsp
))
1199 setup_timer(&fsp
->timer
, fc_lun_reset_send
, (unsigned long)fsp
);
1200 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1201 fc_fcp_unlock_pkt(fsp
);
1206 * fc_lun_reset() - Send a LUN RESET command to a device
1207 * and wait for the reply
1208 * @lport: The local port to sent the comand on
1209 * @fsp: The FCP packet that identifies the LUN to be reset
1210 * @id: The SCSI command ID
1211 * @lun: The LUN ID to be reset
1213 static int fc_lun_reset(struct fc_lport
*lport
, struct fc_fcp_pkt
*fsp
,
1214 unsigned int id
, unsigned int lun
)
1218 fsp
->cdb_cmd
.fc_dl
= htonl(fsp
->data_len
);
1219 fsp
->cdb_cmd
.fc_tm_flags
= FCP_TMF_LUN_RESET
;
1220 int_to_scsilun(lun
, (struct scsi_lun
*)fsp
->cdb_cmd
.fc_lun
);
1222 fsp
->wait_for_comp
= 1;
1223 init_completion(&fsp
->tm_done
);
1225 fc_lun_reset_send((unsigned long)fsp
);
1228 * wait for completion of reset
1229 * after that make sure all commands are terminated
1231 rc
= wait_for_completion_timeout(&fsp
->tm_done
, FC_SCSI_TM_TOV
);
1233 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1234 fsp
->state
|= FC_SRB_COMPL
;
1235 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1237 del_timer_sync(&fsp
->timer
);
1239 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1241 lport
->tt
.exch_done(fsp
->seq_ptr
);
1242 fsp
->seq_ptr
= NULL
;
1244 fsp
->wait_for_comp
= 0;
1245 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1248 FC_SCSI_DBG(lport
, "lun reset failed\n");
1252 /* cdb_status holds the tmf's rsp code */
1253 if (fsp
->cdb_status
!= FCP_TMF_CMPL
)
1256 FC_SCSI_DBG(lport
, "lun reset to lun %u completed\n", lun
);
1257 fc_fcp_cleanup_each_cmd(lport
, id
, lun
, FC_CMD_ABORTED
);
1262 * fc_tm_done() - Task Managment response handler
1263 * @seq: The sequence that the response is on
1264 * @fp: The response frame
1265 * @arg: The FCP packet the response is for
1267 static void fc_tm_done(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1269 struct fc_fcp_pkt
*fsp
= arg
;
1270 struct fc_frame_header
*fh
;
1274 * If there is an error just let it timeout or wait
1275 * for TMF to be aborted if it timedout.
1277 * scsi-eh will escalate for when either happens.
1282 if (fc_fcp_lock_pkt(fsp
))
1286 * raced with eh timeout handler.
1288 if (!fsp
->seq_ptr
|| !fsp
->wait_for_comp
) {
1289 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1293 fh
= fc_frame_header_get(fp
);
1294 if (fh
->fh_type
!= FC_TYPE_BLS
)
1295 fc_fcp_resp(fsp
, fp
);
1296 fsp
->seq_ptr
= NULL
;
1297 fsp
->lp
->tt
.exch_done(seq
);
1299 fc_fcp_unlock_pkt(fsp
);
1303 * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1304 * @lport: The local port to be cleaned up
1306 static void fc_fcp_cleanup(struct fc_lport
*lport
)
1308 fc_fcp_cleanup_each_cmd(lport
, -1, -1, FC_ERROR
);
1312 * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1313 * @data: The FCP packet that has timed out
1315 * If REC is supported then just issue it and return. The REC exchange will
1316 * complete or time out and recovery can continue at that point. Otherwise,
1317 * if the response has been received without all the data it has been
1318 * ER_TIMEOUT since the response was received. If the response has not been
1319 * received we see if data was received recently. If it has been then we
1320 * continue waiting, otherwise, we abort the command.
1322 static void fc_fcp_timeout(unsigned long data
)
1324 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)data
;
1325 struct fc_rport
*rport
= fsp
->rport
;
1326 struct fc_rport_libfc_priv
*rpriv
= rport
->dd_data
;
1328 if (fc_fcp_lock_pkt(fsp
))
1331 if (fsp
->cdb_cmd
.fc_tm_flags
)
1334 fsp
->state
|= FC_SRB_FCP_PROCESSING_TMO
;
1336 if (rpriv
->flags
& FC_RP_FLAGS_REC_SUPPORTED
)
1338 else if (time_after_eq(fsp
->last_pkt_time
+ (FC_SCSI_ER_TIMEOUT
/ 2),
1340 fc_fcp_timer_set(fsp
, FC_SCSI_ER_TIMEOUT
);
1341 else if (fsp
->state
& FC_SRB_RCV_STATUS
)
1342 fc_fcp_complete_locked(fsp
);
1344 fc_timeout_error(fsp
);
1345 fsp
->state
&= ~FC_SRB_FCP_PROCESSING_TMO
;
1347 fc_fcp_unlock_pkt(fsp
);
1351 * fc_fcp_rec() - Send a REC ELS request
1352 * @fsp: The FCP packet to send the REC request on
1354 static void fc_fcp_rec(struct fc_fcp_pkt
*fsp
)
1356 struct fc_lport
*lport
;
1357 struct fc_frame
*fp
;
1358 struct fc_rport
*rport
;
1359 struct fc_rport_libfc_priv
*rpriv
;
1363 rpriv
= rport
->dd_data
;
1364 if (!fsp
->seq_ptr
|| rpriv
->rp_state
!= RPORT_ST_READY
) {
1365 fsp
->status_code
= FC_HRD_ERROR
;
1367 fc_fcp_complete_locked(fsp
);
1370 fp
= fc_fcp_frame_alloc(lport
, sizeof(struct fc_els_rec
));
1374 fr_seq(fp
) = fsp
->seq_ptr
;
1375 fc_fill_fc_hdr(fp
, FC_RCTL_ELS_REQ
, rport
->port_id
,
1376 fc_host_port_id(rpriv
->local_port
->host
), FC_TYPE_ELS
,
1377 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1378 if (lport
->tt
.elsct_send(lport
, rport
->port_id
, fp
, ELS_REC
,
1379 fc_fcp_rec_resp
, fsp
,
1380 jiffies_to_msecs(FC_SCSI_REC_TOV
))) {
1381 fc_fcp_pkt_hold(fsp
); /* hold while REC outstanding */
1385 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1386 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1388 fc_timeout_error(fsp
);
1392 * fc_fcp_rec_resp() - Handler for REC ELS responses
1393 * @seq: The sequence the response is on
1394 * @fp: The response frame
1395 * @arg: The FCP packet the response is on
1397 * If the response is a reject then the scsi layer will handle
1398 * the timeout. If the response is a LS_ACC then if the I/O was not completed
1399 * set the timeout and return. If the I/O was completed then complete the
1400 * exchange and tell the SCSI layer.
1402 static void fc_fcp_rec_resp(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1404 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)arg
;
1405 struct fc_els_rec_acc
*recp
;
1406 struct fc_els_ls_rjt
*rjt
;
1410 enum dma_data_direction data_dir
;
1412 struct fc_rport_libfc_priv
*rpriv
;
1415 fc_fcp_rec_error(fsp
, fp
);
1419 if (fc_fcp_lock_pkt(fsp
))
1422 fsp
->recov_retry
= 0;
1423 opcode
= fc_frame_payload_op(fp
);
1424 if (opcode
== ELS_LS_RJT
) {
1425 rjt
= fc_frame_payload_get(fp
, sizeof(*rjt
));
1426 switch (rjt
->er_reason
) {
1428 FC_FCP_DBG(fsp
, "device %x unexpected REC reject "
1429 "reason %d expl %d\n",
1430 fsp
->rport
->port_id
, rjt
->er_reason
,
1434 FC_FCP_DBG(fsp
, "device does not support REC\n");
1435 rpriv
= fsp
->rport
->dd_data
;
1437 * if we do not spport RECs or got some bogus
1438 * reason then resetup timer so we check for
1441 rpriv
->flags
&= ~FC_RP_FLAGS_REC_SUPPORTED
;
1442 fc_fcp_timer_set(fsp
, FC_SCSI_ER_TIMEOUT
);
1447 * If no data transfer, the command frame got dropped
1448 * so we just retry. If data was transferred, we
1449 * lost the response but the target has no record,
1450 * so we abort and retry.
1452 if (rjt
->er_explan
== ELS_EXPL_OXID_RXID
&&
1453 fsp
->xfer_len
== 0) {
1454 fc_fcp_retry_cmd(fsp
);
1457 fc_timeout_error(fsp
);
1460 } else if (opcode
== ELS_LS_ACC
) {
1461 if (fsp
->state
& FC_SRB_ABORTED
)
1464 data_dir
= fsp
->cmd
->sc_data_direction
;
1465 recp
= fc_frame_payload_get(fp
, sizeof(*recp
));
1466 offset
= ntohl(recp
->reca_fc4value
);
1467 e_stat
= ntohl(recp
->reca_e_stat
);
1469 if (e_stat
& ESB_ST_COMPLETE
) {
1472 * The exchange is complete.
1474 * For output, we must've lost the response.
1475 * For input, all data must've been sent.
1476 * We lost may have lost the response
1477 * (and a confirmation was requested) and maybe
1480 * If all data received, send SRR
1481 * asking for response. If partial data received,
1482 * or gaps, SRR requests data at start of gap.
1483 * Recovery via SRR relies on in-order-delivery.
1485 if (data_dir
== DMA_TO_DEVICE
) {
1486 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1487 } else if (fsp
->xfer_contig_end
== offset
) {
1488 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1490 offset
= fsp
->xfer_contig_end
;
1491 r_ctl
= FC_RCTL_DD_SOL_DATA
;
1493 fc_fcp_srr(fsp
, r_ctl
, offset
);
1494 } else if (e_stat
& ESB_ST_SEQ_INIT
) {
1497 * The remote port has the initiative, so just
1498 * keep waiting for it to complete.
1500 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1504 * The exchange is incomplete, we have seq. initiative.
1505 * Lost response with requested confirmation,
1506 * lost confirmation, lost transfer ready or
1509 * For output, if not all data was received, ask
1510 * for transfer ready to be repeated.
1512 * If we received or sent all the data, send SRR to
1515 * If we lost a response, we may have lost some read
1518 r_ctl
= FC_RCTL_DD_SOL_DATA
;
1519 if (data_dir
== DMA_TO_DEVICE
) {
1520 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1521 if (offset
< fsp
->data_len
)
1522 r_ctl
= FC_RCTL_DD_DATA_DESC
;
1523 } else if (offset
== fsp
->xfer_contig_end
) {
1524 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1525 } else if (fsp
->xfer_contig_end
< offset
) {
1526 offset
= fsp
->xfer_contig_end
;
1528 fc_fcp_srr(fsp
, r_ctl
, offset
);
1532 fc_fcp_unlock_pkt(fsp
);
1534 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding REC */
1539 * fc_fcp_rec_error() - Handler for REC errors
1540 * @fsp: The FCP packet the error is on
1541 * @fp: The REC frame
1543 static void fc_fcp_rec_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1545 int error
= PTR_ERR(fp
);
1547 if (fc_fcp_lock_pkt(fsp
))
1552 fc_fcp_retry_cmd(fsp
);
1556 FC_FCP_DBG(fsp
, "REC %p fid %x error unexpected error %d\n",
1557 fsp
, fsp
->rport
->port_id
, error
);
1558 fsp
->status_code
= FC_CMD_PLOGO
;
1561 case -FC_EX_TIMEOUT
:
1563 * Assume REC or LS_ACC was lost.
1564 * The exchange manager will have aborted REC, so retry.
1566 FC_FCP_DBG(fsp
, "REC fid %x error error %d retry %d/%d\n",
1567 fsp
->rport
->port_id
, error
, fsp
->recov_retry
,
1568 FC_MAX_RECOV_RETRY
);
1569 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1572 fc_timeout_error(fsp
);
1575 fc_fcp_unlock_pkt(fsp
);
1577 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding REC */
1581 * fc_timeout_error() - Handler for fcp_pkt timeouts
1582 * @fsp: The FCP packt that has timed out
1584 static void fc_timeout_error(struct fc_fcp_pkt
*fsp
)
1586 fsp
->status_code
= FC_CMD_TIME_OUT
;
1587 fsp
->cdb_status
= 0;
1590 * if this fails then we let the scsi command timer fire and
1593 fc_fcp_send_abort(fsp
);
1597 * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1598 * @fsp: The FCP packet the SRR is to be sent on
1599 * @r_ctl: The R_CTL field for the SRR request
1600 * This is called after receiving status but insufficient data, or
1601 * when expecting status but the request has timed out.
1603 static void fc_fcp_srr(struct fc_fcp_pkt
*fsp
, enum fc_rctl r_ctl
, u32 offset
)
1605 struct fc_lport
*lport
= fsp
->lp
;
1606 struct fc_rport
*rport
;
1607 struct fc_rport_libfc_priv
*rpriv
;
1608 struct fc_exch
*ep
= fc_seq_exch(fsp
->seq_ptr
);
1610 struct fcp_srr
*srr
;
1611 struct fc_frame
*fp
;
1615 rpriv
= rport
->dd_data
;
1616 cdb_op
= fsp
->cdb_cmd
.fc_cdb
[0];
1618 if (!(rpriv
->flags
& FC_RP_FLAGS_RETRY
) ||
1619 rpriv
->rp_state
!= RPORT_ST_READY
)
1620 goto retry
; /* shouldn't happen */
1621 fp
= fc_fcp_frame_alloc(lport
, sizeof(*srr
));
1625 srr
= fc_frame_payload_get(fp
, sizeof(*srr
));
1626 memset(srr
, 0, sizeof(*srr
));
1627 srr
->srr_op
= ELS_SRR
;
1628 srr
->srr_ox_id
= htons(ep
->oxid
);
1629 srr
->srr_rx_id
= htons(ep
->rxid
);
1630 srr
->srr_r_ctl
= r_ctl
;
1631 srr
->srr_rel_off
= htonl(offset
);
1633 fc_fill_fc_hdr(fp
, FC_RCTL_ELS4_REQ
, rport
->port_id
,
1634 fc_host_port_id(rpriv
->local_port
->host
), FC_TYPE_FCP
,
1635 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1637 seq
= lport
->tt
.exch_seq_send(lport
, fp
, fc_fcp_srr_resp
, NULL
,
1638 fsp
, jiffies_to_msecs(FC_SCSI_REC_TOV
));
1642 fsp
->recov_seq
= seq
;
1643 fsp
->xfer_len
= offset
;
1644 fsp
->xfer_contig_end
= offset
;
1645 fsp
->state
&= ~FC_SRB_RCV_STATUS
;
1646 fc_fcp_pkt_hold(fsp
); /* hold for outstanding SRR */
1649 fc_fcp_retry_cmd(fsp
);
1653 * fc_fcp_srr_resp() - Handler for SRR response
1654 * @seq: The sequence the SRR is on
1655 * @fp: The SRR frame
1656 * @arg: The FCP packet the SRR is on
1658 static void fc_fcp_srr_resp(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1660 struct fc_fcp_pkt
*fsp
= arg
;
1661 struct fc_frame_header
*fh
;
1664 fc_fcp_srr_error(fsp
, fp
);
1668 if (fc_fcp_lock_pkt(fsp
))
1671 fh
= fc_frame_header_get(fp
);
1673 * BUG? fc_fcp_srr_error calls exch_done which would release
1674 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1675 * then fc_exch_timeout would be sending an abort. The exch_done
1676 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1677 * an abort response though.
1679 if (fh
->fh_type
== FC_TYPE_BLS
) {
1680 fc_fcp_unlock_pkt(fsp
);
1684 fsp
->recov_seq
= NULL
;
1685 switch (fc_frame_payload_op(fp
)) {
1687 fsp
->recov_retry
= 0;
1688 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1692 fc_timeout_error(fsp
);
1695 fc_fcp_unlock_pkt(fsp
);
1696 fsp
->lp
->tt
.exch_done(seq
);
1699 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding SRR */
1703 * fc_fcp_srr_error() - Handler for SRR errors
1704 * @fsp: The FCP packet that the SRR error is on
1705 * @fp: The SRR frame
1707 static void fc_fcp_srr_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1709 if (fc_fcp_lock_pkt(fsp
))
1711 fsp
->lp
->tt
.exch_done(fsp
->recov_seq
);
1712 fsp
->recov_seq
= NULL
;
1713 switch (PTR_ERR(fp
)) {
1714 case -FC_EX_TIMEOUT
:
1715 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1718 fc_timeout_error(fsp
);
1720 case -FC_EX_CLOSED
: /* e.g., link failure */
1723 fc_fcp_retry_cmd(fsp
);
1726 fc_fcp_unlock_pkt(fsp
);
1728 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding SRR */
1732 * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1733 * @lport: The local port to be checked
1735 static inline int fc_fcp_lport_queue_ready(struct fc_lport
*lport
)
1738 return (lport
->state
== LPORT_ST_READY
) &&
1739 lport
->link_up
&& !lport
->qfull
;
1743 * fc_queuecommand() - The queuecommand function of the SCSI template
1744 * @cmd: The scsi_cmnd to be executed
1745 * @done: The callback function to be called when the scsi_cmnd is complete
1747 * This is the i/o strategy routine, called by the SCSI layer. This routine
1748 * is called with the host_lock held.
1750 int fc_queuecommand(struct scsi_cmnd
*sc_cmd
, void (*done
)(struct scsi_cmnd
*))
1752 struct fc_lport
*lport
;
1753 struct fc_rport
*rport
= starget_to_rport(scsi_target(sc_cmd
->device
));
1754 struct fc_fcp_pkt
*fsp
;
1755 struct fc_rport_libfc_priv
*rpriv
;
1758 struct fcoe_dev_stats
*stats
;
1760 lport
= shost_priv(sc_cmd
->device
->host
);
1761 spin_unlock_irq(lport
->host
->host_lock
);
1763 rval
= fc_remote_port_chkready(rport
);
1765 sc_cmd
->result
= rval
;
1770 if (!*(struct fc_remote_port
**)rport
->dd_data
) {
1772 * rport is transitioning from blocked/deleted to
1775 sc_cmd
->result
= DID_IMM_RETRY
<< 16;
1780 rpriv
= rport
->dd_data
;
1782 if (!fc_fcp_lport_queue_ready(lport
)) {
1784 fc_fcp_can_queue_ramp_down(lport
);
1785 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1789 fsp
= fc_fcp_pkt_alloc(lport
, GFP_ATOMIC
);
1791 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1796 * build the libfc request pkt
1798 fsp
->cmd
= sc_cmd
; /* save the cmd */
1799 fsp
->lp
= lport
; /* save the softc ptr */
1800 fsp
->rport
= rport
; /* set the remote port ptr */
1801 fsp
->xfer_ddp
= FC_XID_UNKNOWN
;
1802 sc_cmd
->scsi_done
= done
;
1805 * set up the transfer length
1807 fsp
->data_len
= scsi_bufflen(sc_cmd
);
1811 * setup the data direction
1813 stats
= fc_lport_get_stats(lport
);
1814 if (sc_cmd
->sc_data_direction
== DMA_FROM_DEVICE
) {
1815 fsp
->req_flags
= FC_SRB_READ
;
1816 stats
->InputRequests
++;
1817 stats
->InputMegabytes
= fsp
->data_len
;
1818 } else if (sc_cmd
->sc_data_direction
== DMA_TO_DEVICE
) {
1819 fsp
->req_flags
= FC_SRB_WRITE
;
1820 stats
->OutputRequests
++;
1821 stats
->OutputMegabytes
= fsp
->data_len
;
1824 stats
->ControlRequests
++;
1827 fsp
->tgt_flags
= rpriv
->flags
;
1829 init_timer(&fsp
->timer
);
1830 fsp
->timer
.data
= (unsigned long)fsp
;
1833 * send it to the lower layer
1834 * if we get -1 return then put the request in the pending
1837 rval
= fc_fcp_pkt_send(lport
, fsp
);
1839 fsp
->state
= FC_SRB_FREE
;
1840 fc_fcp_pkt_release(fsp
);
1841 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1844 spin_lock_irq(lport
->host
->host_lock
);
1847 EXPORT_SYMBOL(fc_queuecommand
);
1850 * fc_io_compl() - Handle responses for completed commands
1851 * @fsp: The FCP packet that is complete
1853 * Translates fcp_pkt errors to a Linux SCSI errors.
1854 * The fcp packet lock must be held when calling.
1856 static void fc_io_compl(struct fc_fcp_pkt
*fsp
)
1858 struct fc_fcp_internal
*si
;
1859 struct scsi_cmnd
*sc_cmd
;
1860 struct fc_lport
*lport
;
1861 unsigned long flags
;
1863 /* release outstanding ddp context */
1864 fc_fcp_ddp_done(fsp
);
1866 fsp
->state
|= FC_SRB_COMPL
;
1867 if (!(fsp
->state
& FC_SRB_FCP_PROCESSING_TMO
)) {
1868 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1869 del_timer_sync(&fsp
->timer
);
1870 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1874 si
= fc_get_scsi_internal(lport
);
1879 * if can_queue ramp down is done then try can_queue ramp up
1880 * since commands are completing now.
1882 if (si
->last_can_queue_ramp_down_time
)
1883 fc_fcp_can_queue_ramp_up(lport
);
1888 if (!sc_cmd
->SCp
.ptr
)
1891 CMD_SCSI_STATUS(sc_cmd
) = fsp
->cdb_status
;
1892 switch (fsp
->status_code
) {
1894 if (fsp
->cdb_status
== 0) {
1898 sc_cmd
->result
= DID_OK
<< 16;
1899 if (fsp
->scsi_resid
)
1900 CMD_RESID_LEN(sc_cmd
) = fsp
->scsi_resid
;
1903 * transport level I/O was ok but scsi
1904 * has non zero status
1906 sc_cmd
->result
= (DID_OK
<< 16) | fsp
->cdb_status
;
1910 sc_cmd
->result
= DID_ERROR
<< 16;
1912 case FC_DATA_UNDRUN
:
1913 if ((fsp
->cdb_status
== 0) && !(fsp
->req_flags
& FC_SRB_READ
)) {
1915 * scsi status is good but transport level
1918 sc_cmd
->result
= (fsp
->state
& FC_SRB_RCV_STATUS
?
1919 DID_OK
: DID_ERROR
) << 16;
1922 * scsi got underrun, this is an error
1924 CMD_RESID_LEN(sc_cmd
) = fsp
->scsi_resid
;
1925 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->cdb_status
;
1928 case FC_DATA_OVRRUN
:
1930 * overrun is an error
1932 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->cdb_status
;
1934 case FC_CMD_ABORTED
:
1935 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->io_status
;
1937 case FC_CMD_TIME_OUT
:
1938 sc_cmd
->result
= (DID_BUS_BUSY
<< 16) | fsp
->io_status
;
1941 sc_cmd
->result
= (DID_RESET
<< 16);
1944 sc_cmd
->result
= (DID_NO_CONNECT
<< 16);
1947 sc_cmd
->result
= (DID_ERROR
<< 16);
1951 spin_lock_irqsave(&si
->scsi_queue_lock
, flags
);
1952 list_del(&fsp
->list
);
1953 spin_unlock_irqrestore(&si
->scsi_queue_lock
, flags
);
1954 sc_cmd
->SCp
.ptr
= NULL
;
1955 sc_cmd
->scsi_done(sc_cmd
);
1957 /* release ref from initial allocation in queue command */
1958 fc_fcp_pkt_release(fsp
);
1962 * fc_eh_abort() - Abort a command
1963 * @sc_cmd: The SCSI command to abort
1965 * From SCSI host template.
1966 * Send an ABTS to the target device and wait for the response.
1968 int fc_eh_abort(struct scsi_cmnd
*sc_cmd
)
1970 struct fc_fcp_pkt
*fsp
;
1971 struct fc_lport
*lport
;
1973 unsigned long flags
;
1975 lport
= shost_priv(sc_cmd
->device
->host
);
1976 if (lport
->state
!= LPORT_ST_READY
)
1978 else if (!lport
->link_up
)
1981 spin_lock_irqsave(lport
->host
->host_lock
, flags
);
1982 fsp
= CMD_SP(sc_cmd
);
1984 /* command completed while scsi eh was setting up */
1985 spin_unlock_irqrestore(lport
->host
->host_lock
, flags
);
1988 /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
1989 fc_fcp_pkt_hold(fsp
);
1990 spin_unlock_irqrestore(lport
->host
->host_lock
, flags
);
1992 if (fc_fcp_lock_pkt(fsp
)) {
1993 /* completed while we were waiting for timer to be deleted */
1998 rc
= fc_fcp_pkt_abort(fsp
);
1999 fc_fcp_unlock_pkt(fsp
);
2002 fc_fcp_pkt_release(fsp
);
2005 EXPORT_SYMBOL(fc_eh_abort
);
2008 * fc_eh_device_reset() - Reset a single LUN
2009 * @sc_cmd: The SCSI command which identifies the device whose
2010 * LUN is to be reset
2012 * Set from SCSI host template.
2014 int fc_eh_device_reset(struct scsi_cmnd
*sc_cmd
)
2016 struct fc_lport
*lport
;
2017 struct fc_fcp_pkt
*fsp
;
2018 struct fc_rport
*rport
= starget_to_rport(scsi_target(sc_cmd
->device
));
2022 rval
= fc_remote_port_chkready(rport
);
2026 lport
= shost_priv(sc_cmd
->device
->host
);
2028 if (lport
->state
!= LPORT_ST_READY
)
2031 FC_SCSI_DBG(lport
, "Resetting rport (%6x)\n", rport
->port_id
);
2033 fsp
= fc_fcp_pkt_alloc(lport
, GFP_NOIO
);
2035 printk(KERN_WARNING
"libfc: could not allocate scsi_pkt\n");
2040 * Build the libfc request pkt. Do not set the scsi cmnd, because
2041 * the sc passed in is not setup for execution like when sent
2042 * through the queuecommand callout.
2044 fsp
->lp
= lport
; /* save the softc ptr */
2045 fsp
->rport
= rport
; /* set the remote port ptr */
2048 * flush outstanding commands
2050 rc
= fc_lun_reset(lport
, fsp
, scmd_id(sc_cmd
), sc_cmd
->device
->lun
);
2051 fsp
->state
= FC_SRB_FREE
;
2052 fc_fcp_pkt_release(fsp
);
2057 EXPORT_SYMBOL(fc_eh_device_reset
);
2060 * fc_eh_host_reset() - Reset a Scsi_Host.
2061 * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2063 int fc_eh_host_reset(struct scsi_cmnd
*sc_cmd
)
2065 struct Scsi_Host
*shost
= sc_cmd
->device
->host
;
2066 struct fc_lport
*lport
= shost_priv(shost
);
2067 unsigned long wait_tmo
;
2069 FC_SCSI_DBG(lport
, "Resetting host\n");
2071 lport
->tt
.lport_reset(lport
);
2072 wait_tmo
= jiffies
+ FC_HOST_RESET_TIMEOUT
;
2073 while (!fc_fcp_lport_queue_ready(lport
) && time_before(jiffies
,
2077 if (fc_fcp_lport_queue_ready(lport
)) {
2078 shost_printk(KERN_INFO
, shost
, "libfc: Host reset succeeded "
2079 "on port (%6x)\n", fc_host_port_id(lport
->host
));
2082 shost_printk(KERN_INFO
, shost
, "libfc: Host reset failed, "
2083 "port (%6x) is not ready.\n",
2084 fc_host_port_id(lport
->host
));
2088 EXPORT_SYMBOL(fc_eh_host_reset
);
2091 * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2092 * @sdev: The SCSI device that identifies the SCSI host
2094 * Configures queue depth based on host's cmd_per_len. If not set
2095 * then we use the libfc default.
2097 int fc_slave_alloc(struct scsi_device
*sdev
)
2099 struct fc_rport
*rport
= starget_to_rport(scsi_target(sdev
));
2101 if (!rport
|| fc_remote_port_chkready(rport
))
2104 if (sdev
->tagged_supported
)
2105 scsi_activate_tcq(sdev
, FC_FCP_DFLT_QUEUE_DEPTH
);
2107 scsi_adjust_queue_depth(sdev
, scsi_get_tag_type(sdev
),
2108 FC_FCP_DFLT_QUEUE_DEPTH
);
2112 EXPORT_SYMBOL(fc_slave_alloc
);
2115 * fc_change_queue_depth() - Change a device's queue depth
2116 * @sdev: The SCSI device whose queue depth is to change
2117 * @qdepth: The new queue depth
2118 * @reason: The resason for the change
2120 int fc_change_queue_depth(struct scsi_device
*sdev
, int qdepth
, int reason
)
2123 case SCSI_QDEPTH_DEFAULT
:
2124 scsi_adjust_queue_depth(sdev
, scsi_get_tag_type(sdev
), qdepth
);
2126 case SCSI_QDEPTH_QFULL
:
2127 scsi_track_queue_full(sdev
, qdepth
);
2129 case SCSI_QDEPTH_RAMP_UP
:
2130 scsi_adjust_queue_depth(sdev
, scsi_get_tag_type(sdev
), qdepth
);
2135 return sdev
->queue_depth
;
2137 EXPORT_SYMBOL(fc_change_queue_depth
);
2140 * fc_change_queue_type() - Change a device's queue type
2141 * @sdev: The SCSI device whose queue depth is to change
2142 * @tag_type: Identifier for queue type
2144 int fc_change_queue_type(struct scsi_device
*sdev
, int tag_type
)
2146 if (sdev
->tagged_supported
) {
2147 scsi_set_tag_type(sdev
, tag_type
);
2149 scsi_activate_tcq(sdev
, sdev
->queue_depth
);
2151 scsi_deactivate_tcq(sdev
, sdev
->queue_depth
);
2157 EXPORT_SYMBOL(fc_change_queue_type
);
2160 * fc_fcp_destory() - Tear down the FCP layer for a given local port
2161 * @lport: The local port that no longer needs the FCP layer
2163 void fc_fcp_destroy(struct fc_lport
*lport
)
2165 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lport
);
2167 if (!list_empty(&si
->scsi_pkt_queue
))
2168 printk(KERN_ERR
"libfc: Leaked SCSI packets when destroying "
2169 "port (%6x)\n", fc_host_port_id(lport
->host
));
2171 mempool_destroy(si
->scsi_pkt_pool
);
2173 lport
->scsi_priv
= NULL
;
2175 EXPORT_SYMBOL(fc_fcp_destroy
);
2181 scsi_pkt_cachep
= kmem_cache_create("libfc_fcp_pkt",
2182 sizeof(struct fc_fcp_pkt
),
2183 0, SLAB_HWCACHE_ALIGN
, NULL
);
2184 if (!scsi_pkt_cachep
) {
2185 printk(KERN_ERR
"libfc: Unable to allocate SRB cache, "
2186 "module load failed!");
2193 void fc_destroy_fcp()
2195 if (scsi_pkt_cachep
)
2196 kmem_cache_destroy(scsi_pkt_cachep
);
2200 * fc_fcp_init() - Initialize the FCP layer for a local port
2201 * @lport: The local port to initialize the exchange layer for
2203 int fc_fcp_init(struct fc_lport
*lport
)
2206 struct fc_fcp_internal
*si
;
2208 if (!lport
->tt
.fcp_cmd_send
)
2209 lport
->tt
.fcp_cmd_send
= fc_fcp_cmd_send
;
2211 if (!lport
->tt
.fcp_cleanup
)
2212 lport
->tt
.fcp_cleanup
= fc_fcp_cleanup
;
2214 if (!lport
->tt
.fcp_abort_io
)
2215 lport
->tt
.fcp_abort_io
= fc_fcp_abort_io
;
2217 si
= kzalloc(sizeof(struct fc_fcp_internal
), GFP_KERNEL
);
2220 lport
->scsi_priv
= si
;
2221 si
->max_can_queue
= lport
->host
->can_queue
;
2222 INIT_LIST_HEAD(&si
->scsi_pkt_queue
);
2223 spin_lock_init(&si
->scsi_queue_lock
);
2225 si
->scsi_pkt_pool
= mempool_create_slab_pool(2, scsi_pkt_cachep
);
2226 if (!si
->scsi_pkt_pool
) {
2236 EXPORT_SYMBOL(fc_fcp_init
);