2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/delay.h>
10 #include <linux/gfp.h>
14 * qla2x00_mailbox_command
15 * Issue mailbox command and waits for completion.
18 * ha = adapter block pointer.
19 * mcp = driver internal mbx struct pointer.
22 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
25 * 0 : QLA_SUCCESS = cmd performed success
26 * 1 : QLA_FUNCTION_FAILED (error encountered)
27 * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered)
33 qla2x00_mailbox_command(scsi_qla_host_t
*vha
, mbx_cmd_t
*mcp
)
36 unsigned long flags
= 0;
37 device_reg_t __iomem
*reg
;
42 uint16_t __iomem
*optr
;
45 unsigned long wait_time
;
46 struct qla_hw_data
*ha
= vha
->hw
;
47 scsi_qla_host_t
*base_vha
= pci_get_drvdata(ha
->pdev
);
49 if (ha
->pdev
->error_state
> pci_channel_io_frozen
)
50 return QLA_FUNCTION_TIMEOUT
;
53 io_lock_on
= base_vha
->flags
.init_done
;
56 abort_active
= test_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
58 DEBUG11(printk("%s(%ld): entered.\n", __func__
, base_vha
->host_no
));
60 if (ha
->flags
.pci_channel_io_perm_failure
) {
61 DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX "
62 "Exiting.\n", __func__
, vha
->host_no
));
63 return QLA_FUNCTION_TIMEOUT
;
67 * Wait for active mailbox commands to finish by waiting at most tov
68 * seconds. This is to serialize actual issuing of mailbox cmds during
71 if (!wait_for_completion_timeout(&ha
->mbx_cmd_comp
, mcp
->tov
* HZ
)) {
72 /* Timeout occurred. Return error. */
73 DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
74 "Exiting.\n", __func__
, base_vha
->host_no
));
75 return QLA_FUNCTION_TIMEOUT
;
78 ha
->flags
.mbox_busy
= 1;
79 /* Save mailbox command for debug */
82 DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
83 base_vha
->host_no
, mcp
->mb
[0]));
85 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
87 /* Load mailbox registers. */
88 if (IS_FWI2_CAPABLE(ha
))
89 optr
= (uint16_t __iomem
*)®
->isp24
.mailbox0
;
91 optr
= (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 0);
97 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
98 if (IS_QLA2200(ha
) && cnt
== 8)
100 (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 8);
102 WRT_REG_WORD(optr
, *iptr
);
109 #if defined(QL_DEBUG_LEVEL_1)
110 printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n",
111 __func__
, base_vha
->host_no
);
112 qla2x00_dump_buffer((uint8_t *)mcp
->mb
, 16);
114 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x10), 16);
116 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x20), 8);
118 printk("%s(%ld): I/O address = %p.\n", __func__
, base_vha
->host_no
,
120 qla2x00_dump_regs(base_vha
);
123 /* Issue set host interrupt command to send cmd out. */
124 ha
->flags
.mbox_int
= 0;
125 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
127 /* Unlock mbx registers and wait for interrupt */
128 DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
129 "jiffies=%lx.\n", __func__
, base_vha
->host_no
, jiffies
));
131 /* Wait for mbx cmd completion until timeout */
133 if ((!abort_active
&& io_lock_on
) || IS_NOPOLLING_TYPE(ha
)) {
134 set_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
136 if (IS_FWI2_CAPABLE(ha
))
137 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
139 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
140 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
142 wait_for_completion_timeout(&ha
->mbx_intr_comp
, mcp
->tov
* HZ
);
144 clear_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
147 DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__
,
148 base_vha
->host_no
, command
));
150 if (IS_FWI2_CAPABLE(ha
))
151 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
153 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
154 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
156 wait_time
= jiffies
+ mcp
->tov
* HZ
; /* wait at most tov secs */
157 while (!ha
->flags
.mbox_int
) {
158 if (time_after(jiffies
, wait_time
))
161 /* Check for pending interrupts. */
162 qla2x00_poll(ha
->rsp_q_map
[0]);
164 if (!ha
->flags
.mbox_int
&&
166 command
== MBC_LOAD_RISC_RAM_EXTENDED
))
169 DEBUG17(qla_printk(KERN_WARNING
, ha
,
171 (uint
)((jiffies
- (wait_time
- (mcp
->tov
* HZ
)))/HZ
)));
174 /* Check whether we timed out */
175 if (ha
->flags
.mbox_int
) {
178 DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__
,
179 base_vha
->host_no
, command
));
181 /* Got interrupt. Clear the flag. */
182 ha
->flags
.mbox_int
= 0;
183 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
185 if (ha
->mailbox_out
[0] != MBS_COMMAND_COMPLETE
)
186 rval
= QLA_FUNCTION_FAILED
;
188 /* Load return mailbox registers. */
190 iptr
= (uint16_t *)&ha
->mailbox_out
[0];
192 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
202 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
203 defined(QL_DEBUG_LEVEL_11)
207 if (IS_FWI2_CAPABLE(ha
)) {
208 mb0
= RD_REG_WORD(®
->isp24
.mailbox0
);
209 ictrl
= RD_REG_DWORD(®
->isp24
.ictrl
);
211 mb0
= RD_MAILBOX_REG(ha
, ®
->isp
, 0);
212 ictrl
= RD_REG_WORD(®
->isp
.ictrl
);
214 printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
215 __func__
, base_vha
->host_no
, command
);
216 printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__
,
217 base_vha
->host_no
, ictrl
, jiffies
);
218 printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__
,
219 base_vha
->host_no
, mb0
);
220 qla2x00_dump_regs(base_vha
);
223 rval
= QLA_FUNCTION_TIMEOUT
;
226 ha
->flags
.mbox_busy
= 0;
231 if ((abort_active
|| !io_lock_on
) && !IS_NOPOLLING_TYPE(ha
)) {
232 DEBUG11(printk("%s(%ld): checking for additional resp "
233 "interrupt.\n", __func__
, base_vha
->host_no
));
235 /* polling mode for non isp_abort commands. */
236 qla2x00_poll(ha
->rsp_q_map
[0]);
239 if (rval
== QLA_FUNCTION_TIMEOUT
&&
240 mcp
->mb
[0] != MBC_GEN_SYSTEM_ERROR
) {
241 if (!io_lock_on
|| (mcp
->flags
& IOCTL_CMD
) ||
242 ha
->flags
.eeh_busy
) {
243 /* not in dpc. schedule it for dpc to take over. */
244 DEBUG(printk("%s(%ld): timeout schedule "
245 "isp_abort_needed.\n", __func__
,
247 DEBUG2_3_11(printk("%s(%ld): timeout schedule "
248 "isp_abort_needed.\n", __func__
,
250 qla_printk(KERN_WARNING
, ha
,
251 "Mailbox command timeout occurred. Scheduling ISP "
252 "abort. eeh_busy: 0x%x\n", ha
->flags
.eeh_busy
);
253 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
254 qla2xxx_wake_dpc(vha
);
255 } else if (!abort_active
) {
256 /* call abort directly since we are in the DPC thread */
257 DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
258 __func__
, base_vha
->host_no
));
259 DEBUG2_3_11(printk("%s(%ld): timeout calling "
260 "abort_isp\n", __func__
, base_vha
->host_no
));
261 qla_printk(KERN_WARNING
, ha
,
262 "Mailbox command timeout occurred. Issuing ISP "
265 set_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
266 clear_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
267 if (qla2x00_abort_isp(base_vha
)) {
268 /* Failed. retry later. */
269 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
271 clear_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
272 DEBUG(printk("%s(%ld): finished abort_isp\n", __func__
,
274 DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
275 __func__
, base_vha
->host_no
));
279 /* Allow next mbx cmd to come in. */
280 complete(&ha
->mbx_cmd_comp
);
283 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
284 "mbx2=%x, cmd=%x ****\n", __func__
, base_vha
->host_no
,
285 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2], command
));
287 DEBUG11(printk("%s(%ld): done.\n", __func__
,
295 qla2x00_load_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t risc_addr
,
296 uint32_t risc_code_size
)
299 struct qla_hw_data
*ha
= vha
->hw
;
301 mbx_cmd_t
*mcp
= &mc
;
303 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
305 if (MSW(risc_addr
) || IS_FWI2_CAPABLE(ha
)) {
306 mcp
->mb
[0] = MBC_LOAD_RISC_RAM_EXTENDED
;
307 mcp
->mb
[8] = MSW(risc_addr
);
308 mcp
->out_mb
= MBX_8
|MBX_0
;
310 mcp
->mb
[0] = MBC_LOAD_RISC_RAM
;
313 mcp
->mb
[1] = LSW(risc_addr
);
314 mcp
->mb
[2] = MSW(req_dma
);
315 mcp
->mb
[3] = LSW(req_dma
);
316 mcp
->mb
[6] = MSW(MSD(req_dma
));
317 mcp
->mb
[7] = LSW(MSD(req_dma
));
318 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
319 if (IS_FWI2_CAPABLE(ha
)) {
320 mcp
->mb
[4] = MSW(risc_code_size
);
321 mcp
->mb
[5] = LSW(risc_code_size
);
322 mcp
->out_mb
|= MBX_5
|MBX_4
;
324 mcp
->mb
[4] = LSW(risc_code_size
);
325 mcp
->out_mb
|= MBX_4
;
329 mcp
->tov
= MBX_TOV_SECONDS
;
331 rval
= qla2x00_mailbox_command(vha
, mcp
);
333 if (rval
!= QLA_SUCCESS
) {
334 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
335 vha
->host_no
, rval
, mcp
->mb
[0]));
337 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
343 #define EXTENDED_BB_CREDITS BIT_0
346 * Start adapter firmware.
349 * ha = adapter block pointer.
350 * TARGET_QUEUE_LOCK must be released.
351 * ADAPTER_STATE_LOCK must be released.
354 * qla2x00 local function return status code.
360 qla2x00_execute_fw(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
363 struct qla_hw_data
*ha
= vha
->hw
;
365 mbx_cmd_t
*mcp
= &mc
;
367 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
369 mcp
->mb
[0] = MBC_EXECUTE_FIRMWARE
;
372 if (IS_FWI2_CAPABLE(ha
)) {
373 mcp
->mb
[1] = MSW(risc_addr
);
374 mcp
->mb
[2] = LSW(risc_addr
);
376 if (IS_QLA81XX(ha
)) {
377 struct nvram_81xx
*nv
= ha
->nvram
;
378 mcp
->mb
[4] = (nv
->enhanced_features
&
379 EXTENDED_BB_CREDITS
);
382 mcp
->out_mb
|= MBX_4
|MBX_3
|MBX_2
|MBX_1
;
385 mcp
->mb
[1] = LSW(risc_addr
);
386 mcp
->out_mb
|= MBX_1
;
387 if (IS_QLA2322(ha
) || IS_QLA6322(ha
)) {
389 mcp
->out_mb
|= MBX_2
;
393 mcp
->tov
= MBX_TOV_SECONDS
;
395 rval
= qla2x00_mailbox_command(vha
, mcp
);
397 if (rval
!= QLA_SUCCESS
) {
398 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
399 vha
->host_no
, rval
, mcp
->mb
[0]));
401 if (IS_FWI2_CAPABLE(ha
)) {
402 DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
403 __func__
, vha
->host_no
, mcp
->mb
[1]));
405 DEBUG11(printk("%s(%ld): done.\n", __func__
,
414 * qla2x00_get_fw_version
415 * Get firmware version.
418 * ha: adapter state pointer.
419 * major: pointer for major number.
420 * minor: pointer for minor number.
421 * subminor: pointer for subminor number.
424 * qla2x00 local function return status code.
430 qla2x00_get_fw_version(scsi_qla_host_t
*vha
, uint16_t *major
, uint16_t *minor
,
431 uint16_t *subminor
, uint16_t *attributes
, uint32_t *memory
, uint8_t *mpi
,
432 uint32_t *mpi_caps
, uint8_t *phy
)
436 mbx_cmd_t
*mcp
= &mc
;
438 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
440 mcp
->mb
[0] = MBC_GET_FIRMWARE_VERSION
;
442 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
443 if (IS_QLA81XX(vha
->hw
))
444 mcp
->in_mb
|= MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
;
446 mcp
->tov
= MBX_TOV_SECONDS
;
447 rval
= qla2x00_mailbox_command(vha
, mcp
);
448 if (rval
!= QLA_SUCCESS
)
451 /* Return mailbox data. */
454 *subminor
= mcp
->mb
[3];
455 *attributes
= mcp
->mb
[6];
456 if (IS_QLA2100(vha
->hw
) || IS_QLA2200(vha
->hw
))
457 *memory
= 0x1FFFF; /* Defaults to 128KB. */
459 *memory
= (mcp
->mb
[5] << 16) | mcp
->mb
[4];
460 if (IS_QLA81XX(vha
->hw
)) {
461 mpi
[0] = mcp
->mb
[10] & 0xff;
462 mpi
[1] = mcp
->mb
[11] >> 8;
463 mpi
[2] = mcp
->mb
[11] & 0xff;
464 *mpi_caps
= (mcp
->mb
[12] << 16) | mcp
->mb
[13];
465 phy
[0] = mcp
->mb
[8] & 0xff;
466 phy
[1] = mcp
->mb
[9] >> 8;
467 phy
[2] = mcp
->mb
[9] & 0xff;
470 if (rval
!= QLA_SUCCESS
) {
472 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
473 vha
->host_no
, rval
));
476 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
482 * qla2x00_get_fw_options
483 * Set firmware options.
486 * ha = adapter block pointer.
487 * fwopt = pointer for firmware options.
490 * qla2x00 local function return status code.
496 qla2x00_get_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
500 mbx_cmd_t
*mcp
= &mc
;
502 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
504 mcp
->mb
[0] = MBC_GET_FIRMWARE_OPTION
;
506 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
507 mcp
->tov
= MBX_TOV_SECONDS
;
509 rval
= qla2x00_mailbox_command(vha
, mcp
);
511 if (rval
!= QLA_SUCCESS
) {
513 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
514 vha
->host_no
, rval
));
516 fwopts
[0] = mcp
->mb
[0];
517 fwopts
[1] = mcp
->mb
[1];
518 fwopts
[2] = mcp
->mb
[2];
519 fwopts
[3] = mcp
->mb
[3];
521 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
529 * qla2x00_set_fw_options
530 * Set firmware options.
533 * ha = adapter block pointer.
534 * fwopt = pointer for firmware options.
537 * qla2x00 local function return status code.
543 qla2x00_set_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
547 mbx_cmd_t
*mcp
= &mc
;
549 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
551 mcp
->mb
[0] = MBC_SET_FIRMWARE_OPTION
;
552 mcp
->mb
[1] = fwopts
[1];
553 mcp
->mb
[2] = fwopts
[2];
554 mcp
->mb
[3] = fwopts
[3];
555 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
557 if (IS_FWI2_CAPABLE(vha
->hw
)) {
560 mcp
->mb
[10] = fwopts
[10];
561 mcp
->mb
[11] = fwopts
[11];
562 mcp
->mb
[12] = 0; /* Undocumented, but used */
563 mcp
->out_mb
|= MBX_12
|MBX_11
|MBX_10
;
565 mcp
->tov
= MBX_TOV_SECONDS
;
567 rval
= qla2x00_mailbox_command(vha
, mcp
);
569 fwopts
[0] = mcp
->mb
[0];
571 if (rval
!= QLA_SUCCESS
) {
573 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__
,
574 vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
577 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
584 * qla2x00_mbx_reg_test
585 * Mailbox register wrap test.
588 * ha = adapter block pointer.
589 * TARGET_QUEUE_LOCK must be released.
590 * ADAPTER_STATE_LOCK must be released.
593 * qla2x00 local function return status code.
599 qla2x00_mbx_reg_test(scsi_qla_host_t
*vha
)
603 mbx_cmd_t
*mcp
= &mc
;
605 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", vha
->host_no
));
607 mcp
->mb
[0] = MBC_MAILBOX_REGISTER_TEST
;
615 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
616 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
617 mcp
->tov
= MBX_TOV_SECONDS
;
619 rval
= qla2x00_mailbox_command(vha
, mcp
);
621 if (rval
== QLA_SUCCESS
) {
622 if (mcp
->mb
[1] != 0xAAAA || mcp
->mb
[2] != 0x5555 ||
623 mcp
->mb
[3] != 0xAA55 || mcp
->mb
[4] != 0x55AA)
624 rval
= QLA_FUNCTION_FAILED
;
625 if (mcp
->mb
[5] != 0xA5A5 || mcp
->mb
[6] != 0x5A5A ||
626 mcp
->mb
[7] != 0x2525)
627 rval
= QLA_FUNCTION_FAILED
;
630 if (rval
!= QLA_SUCCESS
) {
632 DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
633 vha
->host_no
, rval
));
636 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
644 * qla2x00_verify_checksum
645 * Verify firmware checksum.
648 * ha = adapter block pointer.
649 * TARGET_QUEUE_LOCK must be released.
650 * ADAPTER_STATE_LOCK must be released.
653 * qla2x00 local function return status code.
659 qla2x00_verify_checksum(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
663 mbx_cmd_t
*mcp
= &mc
;
665 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
667 mcp
->mb
[0] = MBC_VERIFY_CHECKSUM
;
670 if (IS_FWI2_CAPABLE(vha
->hw
)) {
671 mcp
->mb
[1] = MSW(risc_addr
);
672 mcp
->mb
[2] = LSW(risc_addr
);
673 mcp
->out_mb
|= MBX_2
|MBX_1
;
674 mcp
->in_mb
|= MBX_2
|MBX_1
;
676 mcp
->mb
[1] = LSW(risc_addr
);
677 mcp
->out_mb
|= MBX_1
;
681 mcp
->tov
= MBX_TOV_SECONDS
;
683 rval
= qla2x00_mailbox_command(vha
, mcp
);
685 if (rval
!= QLA_SUCCESS
) {
686 DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__
,
687 vha
->host_no
, rval
, IS_FWI2_CAPABLE(vha
->hw
) ?
688 (mcp
->mb
[2] << 16) | mcp
->mb
[1]: mcp
->mb
[1]));
690 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
698 * Issue IOCB using mailbox command
701 * ha = adapter state pointer.
702 * buffer = buffer pointer.
703 * phys_addr = physical address of buffer.
704 * size = size of buffer.
705 * TARGET_QUEUE_LOCK must be released.
706 * ADAPTER_STATE_LOCK must be released.
709 * qla2x00 local function return status code.
715 qla2x00_issue_iocb_timeout(scsi_qla_host_t
*vha
, void *buffer
,
716 dma_addr_t phys_addr
, size_t size
, uint32_t tov
)
720 mbx_cmd_t
*mcp
= &mc
;
722 mcp
->mb
[0] = MBC_IOCB_COMMAND_A64
;
724 mcp
->mb
[2] = MSW(phys_addr
);
725 mcp
->mb
[3] = LSW(phys_addr
);
726 mcp
->mb
[6] = MSW(MSD(phys_addr
));
727 mcp
->mb
[7] = LSW(MSD(phys_addr
));
728 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
729 mcp
->in_mb
= MBX_2
|MBX_0
;
732 rval
= qla2x00_mailbox_command(vha
, mcp
);
734 if (rval
!= QLA_SUCCESS
) {
736 DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
737 vha
->host_no
, rval
));
739 sts_entry_t
*sts_entry
= (sts_entry_t
*) buffer
;
741 /* Mask reserved bits. */
742 sts_entry
->entry_status
&=
743 IS_FWI2_CAPABLE(vha
->hw
) ? RF_MASK_24XX
: RF_MASK
;
750 qla2x00_issue_iocb(scsi_qla_host_t
*vha
, void *buffer
, dma_addr_t phys_addr
,
753 return qla2x00_issue_iocb_timeout(vha
, buffer
, phys_addr
, size
,
758 * qla2x00_abort_command
759 * Abort command aborts a specified IOCB.
762 * ha = adapter block pointer.
763 * sp = SB structure pointer.
766 * qla2x00 local function return status code.
772 qla2x00_abort_command(srb_t
*sp
)
774 unsigned long flags
= 0;
778 mbx_cmd_t
*mcp
= &mc
;
779 fc_port_t
*fcport
= sp
->fcport
;
780 scsi_qla_host_t
*vha
= fcport
->vha
;
781 struct qla_hw_data
*ha
= vha
->hw
;
782 struct req_que
*req
= vha
->req
;
784 DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha
->host_no
));
786 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
787 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
788 if (req
->outstanding_cmds
[handle
] == sp
)
791 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
793 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
794 /* command not found */
795 return QLA_FUNCTION_FAILED
;
798 mcp
->mb
[0] = MBC_ABORT_COMMAND
;
799 if (HAS_EXTENDED_IDS(ha
))
800 mcp
->mb
[1] = fcport
->loop_id
;
802 mcp
->mb
[1] = fcport
->loop_id
<< 8;
803 mcp
->mb
[2] = (uint16_t)handle
;
804 mcp
->mb
[3] = (uint16_t)(handle
>> 16);
805 mcp
->mb
[6] = (uint16_t)sp
->cmd
->device
->lun
;
806 mcp
->out_mb
= MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
808 mcp
->tov
= MBX_TOV_SECONDS
;
810 rval
= qla2x00_mailbox_command(vha
, mcp
);
812 if (rval
!= QLA_SUCCESS
) {
813 DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
814 vha
->host_no
, rval
));
816 DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
824 qla2x00_abort_target(struct fc_port
*fcport
, unsigned int l
, int tag
)
828 mbx_cmd_t
*mcp
= &mc
;
829 scsi_qla_host_t
*vha
;
833 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
837 req
= vha
->hw
->req_q_map
[tag
];
838 rsp
= vha
->hw
->rsp_q_map
[tag
];
839 mcp
->mb
[0] = MBC_ABORT_TARGET
;
840 mcp
->out_mb
= MBX_9
|MBX_2
|MBX_1
|MBX_0
;
841 if (HAS_EXTENDED_IDS(vha
->hw
)) {
842 mcp
->mb
[1] = fcport
->loop_id
;
844 mcp
->out_mb
|= MBX_10
;
846 mcp
->mb
[1] = fcport
->loop_id
<< 8;
848 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
849 mcp
->mb
[9] = vha
->vp_idx
;
852 mcp
->tov
= MBX_TOV_SECONDS
;
854 rval
= qla2x00_mailbox_command(vha
, mcp
);
855 if (rval
!= QLA_SUCCESS
) {
856 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
857 vha
->host_no
, rval
));
860 /* Issue marker IOCB. */
861 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, 0,
863 if (rval2
!= QLA_SUCCESS
) {
864 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
865 "(%x).\n", __func__
, vha
->host_no
, rval2
));
867 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
874 qla2x00_lun_reset(struct fc_port
*fcport
, unsigned int l
, int tag
)
878 mbx_cmd_t
*mcp
= &mc
;
879 scsi_qla_host_t
*vha
;
883 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
886 req
= vha
->hw
->req_q_map
[tag
];
887 rsp
= vha
->hw
->rsp_q_map
[tag
];
888 mcp
->mb
[0] = MBC_LUN_RESET
;
889 mcp
->out_mb
= MBX_9
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
890 if (HAS_EXTENDED_IDS(vha
->hw
))
891 mcp
->mb
[1] = fcport
->loop_id
;
893 mcp
->mb
[1] = fcport
->loop_id
<< 8;
896 mcp
->mb
[9] = vha
->vp_idx
;
899 mcp
->tov
= MBX_TOV_SECONDS
;
901 rval
= qla2x00_mailbox_command(vha
, mcp
);
902 if (rval
!= QLA_SUCCESS
) {
903 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
904 vha
->host_no
, rval
));
907 /* Issue marker IOCB. */
908 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
910 if (rval2
!= QLA_SUCCESS
) {
911 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
912 "(%x).\n", __func__
, vha
->host_no
, rval2
));
914 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
921 * qla2x00_get_adapter_id
922 * Get adapter ID and topology.
925 * ha = adapter block pointer.
926 * id = pointer for loop ID.
927 * al_pa = pointer for AL_PA.
928 * area = pointer for area.
929 * domain = pointer for domain.
930 * top = pointer for topology.
931 * TARGET_QUEUE_LOCK must be released.
932 * ADAPTER_STATE_LOCK must be released.
935 * qla2x00 local function return status code.
941 qla2x00_get_adapter_id(scsi_qla_host_t
*vha
, uint16_t *id
, uint8_t *al_pa
,
942 uint8_t *area
, uint8_t *domain
, uint16_t *top
, uint16_t *sw_cap
)
946 mbx_cmd_t
*mcp
= &mc
;
948 DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
951 mcp
->mb
[0] = MBC_GET_ADAPTER_LOOP_ID
;
952 mcp
->mb
[9] = vha
->vp_idx
;
953 mcp
->out_mb
= MBX_9
|MBX_0
;
954 mcp
->in_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
955 if (IS_QLA81XX(vha
->hw
))
956 mcp
->in_mb
|= MBX_13
|MBX_12
|MBX_11
|MBX_10
;
957 mcp
->tov
= MBX_TOV_SECONDS
;
959 rval
= qla2x00_mailbox_command(vha
, mcp
);
960 if (mcp
->mb
[0] == MBS_COMMAND_ERROR
)
961 rval
= QLA_COMMAND_ERROR
;
962 else if (mcp
->mb
[0] == MBS_INVALID_COMMAND
)
963 rval
= QLA_INVALID_COMMAND
;
967 *al_pa
= LSB(mcp
->mb
[2]);
968 *area
= MSB(mcp
->mb
[2]);
969 *domain
= LSB(mcp
->mb
[3]);
971 *sw_cap
= mcp
->mb
[7];
973 if (rval
!= QLA_SUCCESS
) {
975 DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
976 vha
->host_no
, rval
));
978 DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
981 if (IS_QLA81XX(vha
->hw
)) {
982 vha
->fcoe_vlan_id
= mcp
->mb
[9] & 0xfff;
983 vha
->fcoe_fcf_idx
= mcp
->mb
[10];
984 vha
->fcoe_vn_port_mac
[5] = mcp
->mb
[11] >> 8;
985 vha
->fcoe_vn_port_mac
[4] = mcp
->mb
[11] & 0xff;
986 vha
->fcoe_vn_port_mac
[3] = mcp
->mb
[12] >> 8;
987 vha
->fcoe_vn_port_mac
[2] = mcp
->mb
[12] & 0xff;
988 vha
->fcoe_vn_port_mac
[1] = mcp
->mb
[13] >> 8;
989 vha
->fcoe_vn_port_mac
[0] = mcp
->mb
[13] & 0xff;
997 * qla2x00_get_retry_cnt
998 * Get current firmware login retry count and delay.
1001 * ha = adapter block pointer.
1002 * retry_cnt = pointer to login retry count.
1003 * tov = pointer to login timeout value.
1006 * qla2x00 local function return status code.
1012 qla2x00_get_retry_cnt(scsi_qla_host_t
*vha
, uint8_t *retry_cnt
, uint8_t *tov
,
1018 mbx_cmd_t
*mcp
= &mc
;
1020 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
1023 mcp
->mb
[0] = MBC_GET_RETRY_COUNT
;
1024 mcp
->out_mb
= MBX_0
;
1025 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1026 mcp
->tov
= MBX_TOV_SECONDS
;
1028 rval
= qla2x00_mailbox_command(vha
, mcp
);
1030 if (rval
!= QLA_SUCCESS
) {
1032 DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
1033 vha
->host_no
, mcp
->mb
[0]));
1035 /* Convert returned data and check our values. */
1036 *r_a_tov
= mcp
->mb
[3] / 2;
1037 ratov
= (mcp
->mb
[3]/2) / 10; /* mb[3] value is in 100ms */
1038 if (mcp
->mb
[1] * ratov
> (*retry_cnt
) * (*tov
)) {
1039 /* Update to the larger values */
1040 *retry_cnt
= (uint8_t)mcp
->mb
[1];
1044 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
1045 "ratov=%d.\n", vha
->host_no
, mcp
->mb
[3], ratov
));
1052 * qla2x00_init_firmware
1053 * Initialize adapter firmware.
1056 * ha = adapter block pointer.
1057 * dptr = Initialization control block pointer.
1058 * size = size of initialization control block.
1059 * TARGET_QUEUE_LOCK must be released.
1060 * ADAPTER_STATE_LOCK must be released.
1063 * qla2x00 local function return status code.
1069 qla2x00_init_firmware(scsi_qla_host_t
*vha
, uint16_t size
)
1073 mbx_cmd_t
*mcp
= &mc
;
1074 struct qla_hw_data
*ha
= vha
->hw
;
1076 DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
1079 if (ha
->flags
.npiv_supported
)
1080 mcp
->mb
[0] = MBC_MID_INITIALIZE_FIRMWARE
;
1082 mcp
->mb
[0] = MBC_INITIALIZE_FIRMWARE
;
1085 mcp
->mb
[2] = MSW(ha
->init_cb_dma
);
1086 mcp
->mb
[3] = LSW(ha
->init_cb_dma
);
1087 mcp
->mb
[6] = MSW(MSD(ha
->init_cb_dma
));
1088 mcp
->mb
[7] = LSW(MSD(ha
->init_cb_dma
));
1089 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1090 if (IS_QLA81XX(ha
) && ha
->ex_init_cb
->ex_version
) {
1092 mcp
->mb
[10] = MSW(ha
->ex_init_cb_dma
);
1093 mcp
->mb
[11] = LSW(ha
->ex_init_cb_dma
);
1094 mcp
->mb
[12] = MSW(MSD(ha
->ex_init_cb_dma
));
1095 mcp
->mb
[13] = LSW(MSD(ha
->ex_init_cb_dma
));
1096 mcp
->mb
[14] = sizeof(*ha
->ex_init_cb
);
1097 mcp
->out_mb
|= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
;
1100 mcp
->buf_size
= size
;
1101 mcp
->flags
= MBX_DMA_OUT
;
1102 mcp
->tov
= MBX_TOV_SECONDS
;
1103 rval
= qla2x00_mailbox_command(vha
, mcp
);
1105 if (rval
!= QLA_SUCCESS
) {
1107 DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
1109 vha
->host_no
, rval
, mcp
->mb
[0]));
1112 DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
1120 * qla2x00_get_port_database
1121 * Issue normal/enhanced get port database mailbox command
1122 * and copy device name as necessary.
1125 * ha = adapter state pointer.
1126 * dev = structure pointer.
1127 * opt = enhanced cmd option byte.
1130 * qla2x00 local function return status code.
1136 qla2x00_get_port_database(scsi_qla_host_t
*vha
, fc_port_t
*fcport
, uint8_t opt
)
1140 mbx_cmd_t
*mcp
= &mc
;
1141 port_database_t
*pd
;
1142 struct port_database_24xx
*pd24
;
1144 struct qla_hw_data
*ha
= vha
->hw
;
1146 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1149 pd
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pd_dma
);
1151 DEBUG2_3(printk("%s(%ld): failed to allocate Port Database "
1152 "structure.\n", __func__
, vha
->host_no
));
1153 return QLA_MEMORY_ALLOC_FAILED
;
1155 memset(pd
, 0, max(PORT_DATABASE_SIZE
, PORT_DATABASE_24XX_SIZE
));
1157 mcp
->mb
[0] = MBC_GET_PORT_DATABASE
;
1158 if (opt
!= 0 && !IS_FWI2_CAPABLE(ha
))
1159 mcp
->mb
[0] = MBC_ENHANCED_GET_PORT_DATABASE
;
1160 mcp
->mb
[2] = MSW(pd_dma
);
1161 mcp
->mb
[3] = LSW(pd_dma
);
1162 mcp
->mb
[6] = MSW(MSD(pd_dma
));
1163 mcp
->mb
[7] = LSW(MSD(pd_dma
));
1164 mcp
->mb
[9] = vha
->vp_idx
;
1165 mcp
->out_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1167 if (IS_FWI2_CAPABLE(ha
)) {
1168 mcp
->mb
[1] = fcport
->loop_id
;
1170 mcp
->out_mb
|= MBX_10
|MBX_1
;
1171 mcp
->in_mb
|= MBX_1
;
1172 } else if (HAS_EXTENDED_IDS(ha
)) {
1173 mcp
->mb
[1] = fcport
->loop_id
;
1175 mcp
->out_mb
|= MBX_10
|MBX_1
;
1177 mcp
->mb
[1] = fcport
->loop_id
<< 8 | opt
;
1178 mcp
->out_mb
|= MBX_1
;
1180 mcp
->buf_size
= IS_FWI2_CAPABLE(ha
) ?
1181 PORT_DATABASE_24XX_SIZE
: PORT_DATABASE_SIZE
;
1182 mcp
->flags
= MBX_DMA_IN
;
1183 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1184 rval
= qla2x00_mailbox_command(vha
, mcp
);
1185 if (rval
!= QLA_SUCCESS
)
1188 if (IS_FWI2_CAPABLE(ha
)) {
1189 pd24
= (struct port_database_24xx
*) pd
;
1191 /* Check for logged in state. */
1192 if (pd24
->current_login_state
!= PDS_PRLI_COMPLETE
&&
1193 pd24
->last_login_state
!= PDS_PRLI_COMPLETE
) {
1194 DEBUG2(printk("%s(%ld): Unable to verify "
1195 "login-state (%x/%x) for loop_id %x\n",
1196 __func__
, vha
->host_no
,
1197 pd24
->current_login_state
,
1198 pd24
->last_login_state
, fcport
->loop_id
));
1199 rval
= QLA_FUNCTION_FAILED
;
1203 /* Names are little-endian. */
1204 memcpy(fcport
->node_name
, pd24
->node_name
, WWN_SIZE
);
1205 memcpy(fcport
->port_name
, pd24
->port_name
, WWN_SIZE
);
1207 /* Get port_id of device. */
1208 fcport
->d_id
.b
.domain
= pd24
->port_id
[0];
1209 fcport
->d_id
.b
.area
= pd24
->port_id
[1];
1210 fcport
->d_id
.b
.al_pa
= pd24
->port_id
[2];
1211 fcport
->d_id
.b
.rsvd_1
= 0;
1213 /* If not target must be initiator or unknown type. */
1214 if ((pd24
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1215 fcport
->port_type
= FCT_INITIATOR
;
1217 fcport
->port_type
= FCT_TARGET
;
1219 /* Check for logged in state. */
1220 if (pd
->master_state
!= PD_STATE_PORT_LOGGED_IN
&&
1221 pd
->slave_state
!= PD_STATE_PORT_LOGGED_IN
) {
1222 rval
= QLA_FUNCTION_FAILED
;
1226 /* Names are little-endian. */
1227 memcpy(fcport
->node_name
, pd
->node_name
, WWN_SIZE
);
1228 memcpy(fcport
->port_name
, pd
->port_name
, WWN_SIZE
);
1230 /* Get port_id of device. */
1231 fcport
->d_id
.b
.domain
= pd
->port_id
[0];
1232 fcport
->d_id
.b
.area
= pd
->port_id
[3];
1233 fcport
->d_id
.b
.al_pa
= pd
->port_id
[2];
1234 fcport
->d_id
.b
.rsvd_1
= 0;
1236 /* If not target must be initiator or unknown type. */
1237 if ((pd
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1238 fcport
->port_type
= FCT_INITIATOR
;
1240 fcport
->port_type
= FCT_TARGET
;
1242 /* Passback COS information. */
1243 fcport
->supported_classes
= (pd
->options
& BIT_4
) ?
1244 FC_COS_CLASS2
: FC_COS_CLASS3
;
1248 dma_pool_free(ha
->s_dma_pool
, pd
, pd_dma
);
1250 if (rval
!= QLA_SUCCESS
) {
1251 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
1252 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1254 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1261 * qla2x00_get_firmware_state
1262 * Get adapter firmware state.
1265 * ha = adapter block pointer.
1266 * dptr = pointer for firmware state.
1267 * TARGET_QUEUE_LOCK must be released.
1268 * ADAPTER_STATE_LOCK must be released.
1271 * qla2x00 local function return status code.
1277 qla2x00_get_firmware_state(scsi_qla_host_t
*vha
, uint16_t *states
)
1281 mbx_cmd_t
*mcp
= &mc
;
1283 DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
1286 mcp
->mb
[0] = MBC_GET_FIRMWARE_STATE
;
1287 mcp
->out_mb
= MBX_0
;
1288 if (IS_FWI2_CAPABLE(vha
->hw
))
1289 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1291 mcp
->in_mb
= MBX_1
|MBX_0
;
1292 mcp
->tov
= MBX_TOV_SECONDS
;
1294 rval
= qla2x00_mailbox_command(vha
, mcp
);
1296 /* Return firmware states. */
1297 states
[0] = mcp
->mb
[1];
1298 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1299 states
[1] = mcp
->mb
[2];
1300 states
[2] = mcp
->mb
[3];
1301 states
[3] = mcp
->mb
[4];
1302 states
[4] = mcp
->mb
[5];
1305 if (rval
!= QLA_SUCCESS
) {
1307 DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
1308 "failed=%x.\n", vha
->host_no
, rval
));
1311 DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
1319 * qla2x00_get_port_name
1320 * Issue get port name mailbox command.
1321 * Returned name is in big endian format.
1324 * ha = adapter block pointer.
1325 * loop_id = loop ID of device.
1326 * name = pointer for name.
1327 * TARGET_QUEUE_LOCK must be released.
1328 * ADAPTER_STATE_LOCK must be released.
1331 * qla2x00 local function return status code.
1337 qla2x00_get_port_name(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t *name
,
1342 mbx_cmd_t
*mcp
= &mc
;
1344 DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
1347 mcp
->mb
[0] = MBC_GET_PORT_NAME
;
1348 mcp
->mb
[9] = vha
->vp_idx
;
1349 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
1350 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1351 mcp
->mb
[1] = loop_id
;
1353 mcp
->out_mb
|= MBX_10
;
1355 mcp
->mb
[1] = loop_id
<< 8 | opt
;
1358 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1359 mcp
->tov
= MBX_TOV_SECONDS
;
1361 rval
= qla2x00_mailbox_command(vha
, mcp
);
1363 if (rval
!= QLA_SUCCESS
) {
1365 DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
1366 vha
->host_no
, rval
));
1369 /* This function returns name in big endian. */
1370 name
[0] = MSB(mcp
->mb
[2]);
1371 name
[1] = LSB(mcp
->mb
[2]);
1372 name
[2] = MSB(mcp
->mb
[3]);
1373 name
[3] = LSB(mcp
->mb
[3]);
1374 name
[4] = MSB(mcp
->mb
[6]);
1375 name
[5] = LSB(mcp
->mb
[6]);
1376 name
[6] = MSB(mcp
->mb
[7]);
1377 name
[7] = LSB(mcp
->mb
[7]);
1380 DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
1389 * Issue LIP reset mailbox command.
1392 * ha = adapter block pointer.
1393 * TARGET_QUEUE_LOCK must be released.
1394 * ADAPTER_STATE_LOCK must be released.
1397 * qla2x00 local function return status code.
1403 qla2x00_lip_reset(scsi_qla_host_t
*vha
)
1407 mbx_cmd_t
*mcp
= &mc
;
1409 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1411 if (IS_QLA81XX(vha
->hw
)) {
1412 /* Logout across all FCFs. */
1413 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1416 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1417 } else if (IS_FWI2_CAPABLE(vha
->hw
)) {
1418 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1421 mcp
->mb
[3] = vha
->hw
->loop_reset_delay
;
1422 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1424 mcp
->mb
[0] = MBC_LIP_RESET
;
1425 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1426 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1427 mcp
->mb
[1] = 0x00ff;
1429 mcp
->out_mb
|= MBX_10
;
1431 mcp
->mb
[1] = 0xff00;
1433 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
1437 mcp
->tov
= MBX_TOV_SECONDS
;
1439 rval
= qla2x00_mailbox_command(vha
, mcp
);
1441 if (rval
!= QLA_SUCCESS
) {
1443 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
1444 __func__
, vha
->host_no
, rval
));
1447 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1458 * ha = adapter block pointer.
1459 * sns = pointer for command.
1460 * cmd_size = command size.
1461 * buf_size = response/command size.
1462 * TARGET_QUEUE_LOCK must be released.
1463 * ADAPTER_STATE_LOCK must be released.
1466 * qla2x00 local function return status code.
1472 qla2x00_send_sns(scsi_qla_host_t
*vha
, dma_addr_t sns_phys_address
,
1473 uint16_t cmd_size
, size_t buf_size
)
1477 mbx_cmd_t
*mcp
= &mc
;
1479 DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
1482 DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
1483 "tov=%d.\n", vha
->hw
->retry_count
, vha
->hw
->login_timeout
,
1486 mcp
->mb
[0] = MBC_SEND_SNS_COMMAND
;
1487 mcp
->mb
[1] = cmd_size
;
1488 mcp
->mb
[2] = MSW(sns_phys_address
);
1489 mcp
->mb
[3] = LSW(sns_phys_address
);
1490 mcp
->mb
[6] = MSW(MSD(sns_phys_address
));
1491 mcp
->mb
[7] = LSW(MSD(sns_phys_address
));
1492 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1493 mcp
->in_mb
= MBX_0
|MBX_1
;
1494 mcp
->buf_size
= buf_size
;
1495 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
;
1496 mcp
->tov
= (vha
->hw
->login_timeout
* 2) + (vha
->hw
->login_timeout
/ 2);
1497 rval
= qla2x00_mailbox_command(vha
, mcp
);
1499 if (rval
!= QLA_SUCCESS
) {
1501 DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1502 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1503 DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1504 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1507 DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", vha
->host_no
));
1514 qla24xx_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1515 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1519 struct logio_entry_24xx
*lg
;
1522 struct qla_hw_data
*ha
= vha
->hw
;
1523 struct req_que
*req
;
1524 struct rsp_que
*rsp
;
1526 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1528 if (ha
->flags
.cpu_affinity_enabled
)
1529 req
= ha
->req_q_map
[0];
1534 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1536 DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
1537 __func__
, vha
->host_no
));
1538 return QLA_MEMORY_ALLOC_FAILED
;
1540 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1542 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1543 lg
->entry_count
= 1;
1544 lg
->handle
= MAKE_HANDLE(req
->id
, lg
->handle
);
1545 lg
->nport_handle
= cpu_to_le16(loop_id
);
1546 lg
->control_flags
= __constant_cpu_to_le16(LCF_COMMAND_PLOGI
);
1548 lg
->control_flags
|= __constant_cpu_to_le16(LCF_COND_PLOGI
);
1550 lg
->control_flags
|= __constant_cpu_to_le16(LCF_SKIP_PRLI
);
1551 lg
->port_id
[0] = al_pa
;
1552 lg
->port_id
[1] = area
;
1553 lg
->port_id
[2] = domain
;
1554 lg
->vp_index
= vha
->vp_idx
;
1555 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1556 if (rval
!= QLA_SUCCESS
) {
1557 DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
1558 "(%x).\n", __func__
, vha
->host_no
, rval
));
1559 } else if (lg
->entry_status
!= 0) {
1560 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1561 "-- error status (%x).\n", __func__
, vha
->host_no
,
1563 rval
= QLA_FUNCTION_FAILED
;
1564 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1565 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1566 iop
[1] = le32_to_cpu(lg
->io_parameter
[1]);
1568 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1569 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1570 vha
->host_no
, le16_to_cpu(lg
->comp_status
), iop
[0],
1574 case LSC_SCODE_PORTID_USED
:
1575 mb
[0] = MBS_PORT_ID_USED
;
1576 mb
[1] = LSW(iop
[1]);
1578 case LSC_SCODE_NPORT_USED
:
1579 mb
[0] = MBS_LOOP_ID_USED
;
1581 case LSC_SCODE_NOLINK
:
1582 case LSC_SCODE_NOIOCB
:
1583 case LSC_SCODE_NOXCB
:
1584 case LSC_SCODE_CMD_FAILED
:
1585 case LSC_SCODE_NOFABRIC
:
1586 case LSC_SCODE_FW_NOT_READY
:
1587 case LSC_SCODE_NOT_LOGGED_IN
:
1588 case LSC_SCODE_NOPCB
:
1589 case LSC_SCODE_ELS_REJECT
:
1590 case LSC_SCODE_CMD_PARAM_ERR
:
1591 case LSC_SCODE_NONPORT
:
1592 case LSC_SCODE_LOGGED_IN
:
1593 case LSC_SCODE_NOFLOGI_ACC
:
1595 mb
[0] = MBS_COMMAND_ERROR
;
1599 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1601 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1603 mb
[0] = MBS_COMMAND_COMPLETE
;
1605 if (iop
[0] & BIT_4
) {
1611 /* Passback COS information. */
1613 if (lg
->io_parameter
[7] || lg
->io_parameter
[8])
1614 mb
[10] |= BIT_0
; /* Class 2. */
1615 if (lg
->io_parameter
[9] || lg
->io_parameter
[10])
1616 mb
[10] |= BIT_1
; /* Class 3. */
1619 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1625 * qla2x00_login_fabric
1626 * Issue login fabric port mailbox command.
1629 * ha = adapter block pointer.
1630 * loop_id = device loop ID.
1631 * domain = device domain.
1632 * area = device area.
1633 * al_pa = device AL_PA.
1634 * status = pointer for return status.
1635 * opt = command options.
1636 * TARGET_QUEUE_LOCK must be released.
1637 * ADAPTER_STATE_LOCK must be released.
1640 * qla2x00 local function return status code.
1646 qla2x00_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1647 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1651 mbx_cmd_t
*mcp
= &mc
;
1652 struct qla_hw_data
*ha
= vha
->hw
;
1654 DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", vha
->host_no
));
1656 mcp
->mb
[0] = MBC_LOGIN_FABRIC_PORT
;
1657 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1658 if (HAS_EXTENDED_IDS(ha
)) {
1659 mcp
->mb
[1] = loop_id
;
1661 mcp
->out_mb
|= MBX_10
;
1663 mcp
->mb
[1] = (loop_id
<< 8) | opt
;
1665 mcp
->mb
[2] = domain
;
1666 mcp
->mb
[3] = area
<< 8 | al_pa
;
1668 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_2
|MBX_1
|MBX_0
;
1669 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1671 rval
= qla2x00_mailbox_command(vha
, mcp
);
1673 /* Return mailbox statuses. */
1680 /* COS retrieved from Get-Port-Database mailbox command. */
1684 if (rval
!= QLA_SUCCESS
) {
1685 /* RLU tmp code: need to change main mailbox_command function to
1686 * return ok even when the mailbox completion value is not
1687 * SUCCESS. The caller needs to be responsible to interpret
1688 * the return values of this mailbox command if we're not
1689 * to change too much of the existing code.
1691 if (mcp
->mb
[0] == 0x4001 || mcp
->mb
[0] == 0x4002 ||
1692 mcp
->mb
[0] == 0x4003 || mcp
->mb
[0] == 0x4005 ||
1693 mcp
->mb
[0] == 0x4006)
1697 DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
1698 "mb[0]=%x mb[1]=%x mb[2]=%x.\n", vha
->host_no
, rval
,
1699 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
1702 DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
1710 * qla2x00_login_local_device
1711 * Issue login loop port mailbox command.
1714 * ha = adapter block pointer.
1715 * loop_id = device loop ID.
1716 * opt = command options.
1719 * Return status code.
1726 qla2x00_login_local_device(scsi_qla_host_t
*vha
, fc_port_t
*fcport
,
1727 uint16_t *mb_ret
, uint8_t opt
)
1731 mbx_cmd_t
*mcp
= &mc
;
1732 struct qla_hw_data
*ha
= vha
->hw
;
1734 if (IS_FWI2_CAPABLE(ha
))
1735 return qla24xx_login_fabric(vha
, fcport
->loop_id
,
1736 fcport
->d_id
.b
.domain
, fcport
->d_id
.b
.area
,
1737 fcport
->d_id
.b
.al_pa
, mb_ret
, opt
);
1739 DEBUG3(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1741 mcp
->mb
[0] = MBC_LOGIN_LOOP_PORT
;
1742 if (HAS_EXTENDED_IDS(ha
))
1743 mcp
->mb
[1] = fcport
->loop_id
;
1745 mcp
->mb
[1] = fcport
->loop_id
<< 8;
1747 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1748 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_1
|MBX_0
;
1749 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1751 rval
= qla2x00_mailbox_command(vha
, mcp
);
1753 /* Return mailbox statuses. */
1754 if (mb_ret
!= NULL
) {
1755 mb_ret
[0] = mcp
->mb
[0];
1756 mb_ret
[1] = mcp
->mb
[1];
1757 mb_ret
[6] = mcp
->mb
[6];
1758 mb_ret
[7] = mcp
->mb
[7];
1761 if (rval
!= QLA_SUCCESS
) {
1762 /* AV tmp code: need to change main mailbox_command function to
1763 * return ok even when the mailbox completion value is not
1764 * SUCCESS. The caller needs to be responsible to interpret
1765 * the return values of this mailbox command if we're not
1766 * to change too much of the existing code.
1768 if (mcp
->mb
[0] == 0x4005 || mcp
->mb
[0] == 0x4006)
1771 DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1772 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1773 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1774 DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1775 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1776 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1779 DEBUG3(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1786 qla24xx_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1787 uint8_t area
, uint8_t al_pa
)
1790 struct logio_entry_24xx
*lg
;
1792 struct qla_hw_data
*ha
= vha
->hw
;
1793 struct req_que
*req
;
1794 struct rsp_que
*rsp
;
1796 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1798 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1800 DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n",
1801 __func__
, vha
->host_no
));
1802 return QLA_MEMORY_ALLOC_FAILED
;
1804 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1806 if (ql2xmaxqueues
> 1)
1807 req
= ha
->req_q_map
[0];
1811 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1812 lg
->entry_count
= 1;
1813 lg
->handle
= MAKE_HANDLE(req
->id
, lg
->handle
);
1814 lg
->nport_handle
= cpu_to_le16(loop_id
);
1816 __constant_cpu_to_le16(LCF_COMMAND_LOGO
|LCF_IMPL_LOGO
);
1817 lg
->port_id
[0] = al_pa
;
1818 lg
->port_id
[1] = area
;
1819 lg
->port_id
[2] = domain
;
1820 lg
->vp_index
= vha
->vp_idx
;
1822 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1823 if (rval
!= QLA_SUCCESS
) {
1824 DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
1825 "(%x).\n", __func__
, vha
->host_no
, rval
));
1826 } else if (lg
->entry_status
!= 0) {
1827 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1828 "-- error status (%x).\n", __func__
, vha
->host_no
,
1830 rval
= QLA_FUNCTION_FAILED
;
1831 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1832 DEBUG2_3_11(printk("%s(%ld %d): failed to complete IOCB "
1833 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1834 vha
->host_no
, vha
->vp_idx
, le16_to_cpu(lg
->comp_status
),
1835 le32_to_cpu(lg
->io_parameter
[0]),
1836 le32_to_cpu(lg
->io_parameter
[1])));
1839 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1842 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1848 * qla2x00_fabric_logout
1849 * Issue logout fabric port mailbox command.
1852 * ha = adapter block pointer.
1853 * loop_id = device loop ID.
1854 * TARGET_QUEUE_LOCK must be released.
1855 * ADAPTER_STATE_LOCK must be released.
1858 * qla2x00 local function return status code.
1864 qla2x00_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1865 uint8_t area
, uint8_t al_pa
)
1869 mbx_cmd_t
*mcp
= &mc
;
1871 DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
1874 mcp
->mb
[0] = MBC_LOGOUT_FABRIC_PORT
;
1875 mcp
->out_mb
= MBX_1
|MBX_0
;
1876 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1877 mcp
->mb
[1] = loop_id
;
1879 mcp
->out_mb
|= MBX_10
;
1881 mcp
->mb
[1] = loop_id
<< 8;
1884 mcp
->in_mb
= MBX_1
|MBX_0
;
1885 mcp
->tov
= MBX_TOV_SECONDS
;
1887 rval
= qla2x00_mailbox_command(vha
, mcp
);
1889 if (rval
!= QLA_SUCCESS
) {
1891 DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
1892 "mbx1=%x.\n", vha
->host_no
, rval
, mcp
->mb
[1]));
1895 DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
1903 * qla2x00_full_login_lip
1904 * Issue full login LIP mailbox command.
1907 * ha = adapter block pointer.
1908 * TARGET_QUEUE_LOCK must be released.
1909 * ADAPTER_STATE_LOCK must be released.
1912 * qla2x00 local function return status code.
1918 qla2x00_full_login_lip(scsi_qla_host_t
*vha
)
1922 mbx_cmd_t
*mcp
= &mc
;
1924 DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
1927 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1928 mcp
->mb
[1] = IS_FWI2_CAPABLE(vha
->hw
) ? BIT_3
: 0;
1931 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1933 mcp
->tov
= MBX_TOV_SECONDS
;
1935 rval
= qla2x00_mailbox_command(vha
, mcp
);
1937 if (rval
!= QLA_SUCCESS
) {
1939 DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
1940 vha
->host_no
, rval
));
1943 DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
1951 * qla2x00_get_id_list
1954 * ha = adapter block pointer.
1957 * qla2x00 local function return status code.
1963 qla2x00_get_id_list(scsi_qla_host_t
*vha
, void *id_list
, dma_addr_t id_list_dma
,
1968 mbx_cmd_t
*mcp
= &mc
;
1970 DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
1973 if (id_list
== NULL
)
1974 return QLA_FUNCTION_FAILED
;
1976 mcp
->mb
[0] = MBC_GET_ID_LIST
;
1977 mcp
->out_mb
= MBX_0
;
1978 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1979 mcp
->mb
[2] = MSW(id_list_dma
);
1980 mcp
->mb
[3] = LSW(id_list_dma
);
1981 mcp
->mb
[6] = MSW(MSD(id_list_dma
));
1982 mcp
->mb
[7] = LSW(MSD(id_list_dma
));
1984 mcp
->mb
[9] = vha
->vp_idx
;
1985 mcp
->out_mb
|= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
;
1987 mcp
->mb
[1] = MSW(id_list_dma
);
1988 mcp
->mb
[2] = LSW(id_list_dma
);
1989 mcp
->mb
[3] = MSW(MSD(id_list_dma
));
1990 mcp
->mb
[6] = LSW(MSD(id_list_dma
));
1991 mcp
->out_mb
|= MBX_6
|MBX_3
|MBX_2
|MBX_1
;
1993 mcp
->in_mb
= MBX_1
|MBX_0
;
1994 mcp
->tov
= MBX_TOV_SECONDS
;
1996 rval
= qla2x00_mailbox_command(vha
, mcp
);
1998 if (rval
!= QLA_SUCCESS
) {
2000 DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
2001 vha
->host_no
, rval
));
2003 *entries
= mcp
->mb
[1];
2004 DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
2012 * qla2x00_get_resource_cnts
2013 * Get current firmware resource counts.
2016 * ha = adapter block pointer.
2019 * qla2x00 local function return status code.
2025 qla2x00_get_resource_cnts(scsi_qla_host_t
*vha
, uint16_t *cur_xchg_cnt
,
2026 uint16_t *orig_xchg_cnt
, uint16_t *cur_iocb_cnt
,
2027 uint16_t *orig_iocb_cnt
, uint16_t *max_npiv_vports
, uint16_t *max_fcfs
)
2031 mbx_cmd_t
*mcp
= &mc
;
2033 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2035 mcp
->mb
[0] = MBC_GET_RESOURCE_COUNTS
;
2036 mcp
->out_mb
= MBX_0
;
2037 mcp
->in_mb
= MBX_11
|MBX_10
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2038 if (IS_QLA81XX(vha
->hw
))
2039 mcp
->in_mb
|= MBX_12
;
2040 mcp
->tov
= MBX_TOV_SECONDS
;
2042 rval
= qla2x00_mailbox_command(vha
, mcp
);
2044 if (rval
!= QLA_SUCCESS
) {
2046 DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__
,
2047 vha
->host_no
, mcp
->mb
[0]));
2049 DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
2050 "mb7=%x mb10=%x mb11=%x mb12=%x.\n", __func__
,
2051 vha
->host_no
, mcp
->mb
[1], mcp
->mb
[2], mcp
->mb
[3],
2052 mcp
->mb
[6], mcp
->mb
[7], mcp
->mb
[10], mcp
->mb
[11],
2056 *cur_xchg_cnt
= mcp
->mb
[3];
2058 *orig_xchg_cnt
= mcp
->mb
[6];
2060 *cur_iocb_cnt
= mcp
->mb
[7];
2062 *orig_iocb_cnt
= mcp
->mb
[10];
2063 if (vha
->hw
->flags
.npiv_supported
&& max_npiv_vports
)
2064 *max_npiv_vports
= mcp
->mb
[11];
2065 if (IS_QLA81XX(vha
->hw
) && max_fcfs
)
2066 *max_fcfs
= mcp
->mb
[12];
2072 #if defined(QL_DEBUG_LEVEL_3)
2074 * qla2x00_get_fcal_position_map
2075 * Get FCAL (LILP) position map using mailbox command
2078 * ha = adapter state pointer.
2079 * pos_map = buffer pointer (can be NULL).
2082 * qla2x00 local function return status code.
2088 qla2x00_get_fcal_position_map(scsi_qla_host_t
*vha
, char *pos_map
)
2092 mbx_cmd_t
*mcp
= &mc
;
2094 dma_addr_t pmap_dma
;
2095 struct qla_hw_data
*ha
= vha
->hw
;
2097 pmap
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pmap_dma
);
2099 DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****",
2100 __func__
, vha
->host_no
));
2101 return QLA_MEMORY_ALLOC_FAILED
;
2103 memset(pmap
, 0, FCAL_MAP_SIZE
);
2105 mcp
->mb
[0] = MBC_GET_FC_AL_POSITION_MAP
;
2106 mcp
->mb
[2] = MSW(pmap_dma
);
2107 mcp
->mb
[3] = LSW(pmap_dma
);
2108 mcp
->mb
[6] = MSW(MSD(pmap_dma
));
2109 mcp
->mb
[7] = LSW(MSD(pmap_dma
));
2110 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2111 mcp
->in_mb
= MBX_1
|MBX_0
;
2112 mcp
->buf_size
= FCAL_MAP_SIZE
;
2113 mcp
->flags
= MBX_DMA_IN
;
2114 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
2115 rval
= qla2x00_mailbox_command(vha
, mcp
);
2117 if (rval
== QLA_SUCCESS
) {
2118 DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map "
2119 "size (%x)\n", __func__
, vha
->host_no
, mcp
->mb
[0],
2120 mcp
->mb
[1], (unsigned)pmap
[0]));
2121 DEBUG11(qla2x00_dump_buffer(pmap
, pmap
[0] + 1));
2124 memcpy(pos_map
, pmap
, FCAL_MAP_SIZE
);
2126 dma_pool_free(ha
->s_dma_pool
, pmap
, pmap_dma
);
2128 if (rval
!= QLA_SUCCESS
) {
2129 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2130 vha
->host_no
, rval
));
2132 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2140 * qla2x00_get_link_status
2143 * ha = adapter block pointer.
2144 * loop_id = device loop ID.
2145 * ret_buf = pointer to link status return buffer.
2149 * BIT_0 = mem alloc error.
2150 * BIT_1 = mailbox error.
2153 qla2x00_get_link_status(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2154 struct link_statistics
*stats
, dma_addr_t stats_dma
)
2158 mbx_cmd_t
*mcp
= &mc
;
2159 uint32_t *siter
, *diter
, dwords
;
2160 struct qla_hw_data
*ha
= vha
->hw
;
2162 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2164 mcp
->mb
[0] = MBC_GET_LINK_STATUS
;
2165 mcp
->mb
[2] = MSW(stats_dma
);
2166 mcp
->mb
[3] = LSW(stats_dma
);
2167 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2168 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2169 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2171 if (IS_FWI2_CAPABLE(ha
)) {
2172 mcp
->mb
[1] = loop_id
;
2175 mcp
->out_mb
|= MBX_10
|MBX_4
|MBX_1
;
2176 mcp
->in_mb
|= MBX_1
;
2177 } else if (HAS_EXTENDED_IDS(ha
)) {
2178 mcp
->mb
[1] = loop_id
;
2180 mcp
->out_mb
|= MBX_10
|MBX_1
;
2182 mcp
->mb
[1] = loop_id
<< 8;
2183 mcp
->out_mb
|= MBX_1
;
2185 mcp
->tov
= MBX_TOV_SECONDS
;
2186 mcp
->flags
= IOCTL_CMD
;
2187 rval
= qla2x00_mailbox_command(vha
, mcp
);
2189 if (rval
== QLA_SUCCESS
) {
2190 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2191 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2192 __func__
, vha
->host_no
, mcp
->mb
[0]));
2193 rval
= QLA_FUNCTION_FAILED
;
2195 /* Copy over data -- firmware data is LE. */
2196 dwords
= offsetof(struct link_statistics
, unused1
) / 4;
2197 siter
= diter
= &stats
->link_fail_cnt
;
2199 *diter
++ = le32_to_cpu(*siter
++);
2203 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2204 vha
->host_no
, rval
));
2211 qla24xx_get_isp_stats(scsi_qla_host_t
*vha
, struct link_statistics
*stats
,
2212 dma_addr_t stats_dma
)
2216 mbx_cmd_t
*mcp
= &mc
;
2217 uint32_t *siter
, *diter
, dwords
;
2219 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2221 mcp
->mb
[0] = MBC_GET_LINK_PRIV_STATS
;
2222 mcp
->mb
[2] = MSW(stats_dma
);
2223 mcp
->mb
[3] = LSW(stats_dma
);
2224 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2225 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2226 mcp
->mb
[8] = sizeof(struct link_statistics
) / 4;
2227 mcp
->mb
[9] = vha
->vp_idx
;
2229 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2230 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
2231 mcp
->tov
= MBX_TOV_SECONDS
;
2232 mcp
->flags
= IOCTL_CMD
;
2233 rval
= qla2x00_mailbox_command(vha
, mcp
);
2235 if (rval
== QLA_SUCCESS
) {
2236 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2237 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2238 __func__
, vha
->host_no
, mcp
->mb
[0]));
2239 rval
= QLA_FUNCTION_FAILED
;
2241 /* Copy over data -- firmware data is LE. */
2242 dwords
= sizeof(struct link_statistics
) / 4;
2243 siter
= diter
= &stats
->link_fail_cnt
;
2245 *diter
++ = le32_to_cpu(*siter
++);
2249 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2250 vha
->host_no
, rval
));
2257 qla24xx_abort_command(srb_t
*sp
)
2260 unsigned long flags
= 0;
2262 struct abort_entry_24xx
*abt
;
2265 fc_port_t
*fcport
= sp
->fcport
;
2266 struct scsi_qla_host
*vha
= fcport
->vha
;
2267 struct qla_hw_data
*ha
= vha
->hw
;
2268 struct req_que
*req
= vha
->req
;
2270 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2272 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
2273 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
2274 if (req
->outstanding_cmds
[handle
] == sp
)
2277 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
2278 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
2279 /* Command not found. */
2280 return QLA_FUNCTION_FAILED
;
2283 abt
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &abt_dma
);
2285 DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n",
2286 __func__
, vha
->host_no
));
2287 return QLA_MEMORY_ALLOC_FAILED
;
2289 memset(abt
, 0, sizeof(struct abort_entry_24xx
));
2291 abt
->entry_type
= ABORT_IOCB_TYPE
;
2292 abt
->entry_count
= 1;
2293 abt
->handle
= MAKE_HANDLE(req
->id
, abt
->handle
);
2294 abt
->nport_handle
= cpu_to_le16(fcport
->loop_id
);
2295 abt
->handle_to_abort
= handle
;
2296 abt
->port_id
[0] = fcport
->d_id
.b
.al_pa
;
2297 abt
->port_id
[1] = fcport
->d_id
.b
.area
;
2298 abt
->port_id
[2] = fcport
->d_id
.b
.domain
;
2299 abt
->vp_index
= fcport
->vp_idx
;
2301 abt
->req_que_no
= cpu_to_le16(req
->id
);
2303 rval
= qla2x00_issue_iocb(vha
, abt
, abt_dma
, 0);
2304 if (rval
!= QLA_SUCCESS
) {
2305 DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
2306 __func__
, vha
->host_no
, rval
));
2307 } else if (abt
->entry_status
!= 0) {
2308 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2309 "-- error status (%x).\n", __func__
, vha
->host_no
,
2310 abt
->entry_status
));
2311 rval
= QLA_FUNCTION_FAILED
;
2312 } else if (abt
->nport_handle
!= __constant_cpu_to_le16(0)) {
2313 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2314 "-- completion status (%x).\n", __func__
, vha
->host_no
,
2315 le16_to_cpu(abt
->nport_handle
)));
2316 rval
= QLA_FUNCTION_FAILED
;
2318 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2321 dma_pool_free(ha
->s_dma_pool
, abt
, abt_dma
);
2326 struct tsk_mgmt_cmd
{
2328 struct tsk_mgmt_entry tsk
;
2329 struct sts_entry_24xx sts
;
2334 __qla24xx_issue_tmf(char *name
, uint32_t type
, struct fc_port
*fcport
,
2335 unsigned int l
, int tag
)
2338 struct tsk_mgmt_cmd
*tsk
;
2339 struct sts_entry_24xx
*sts
;
2341 scsi_qla_host_t
*vha
;
2342 struct qla_hw_data
*ha
;
2343 struct req_que
*req
;
2344 struct rsp_que
*rsp
;
2346 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
2351 if (ha
->flags
.cpu_affinity_enabled
)
2352 rsp
= ha
->rsp_q_map
[tag
+ 1];
2355 tsk
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &tsk_dma
);
2357 DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
2358 "IOCB.\n", __func__
, vha
->host_no
));
2359 return QLA_MEMORY_ALLOC_FAILED
;
2361 memset(tsk
, 0, sizeof(struct tsk_mgmt_cmd
));
2363 tsk
->p
.tsk
.entry_type
= TSK_MGMT_IOCB_TYPE
;
2364 tsk
->p
.tsk
.entry_count
= 1;
2365 tsk
->p
.tsk
.handle
= MAKE_HANDLE(req
->id
, tsk
->p
.tsk
.handle
);
2366 tsk
->p
.tsk
.nport_handle
= cpu_to_le16(fcport
->loop_id
);
2367 tsk
->p
.tsk
.timeout
= cpu_to_le16(ha
->r_a_tov
/ 10 * 2);
2368 tsk
->p
.tsk
.control_flags
= cpu_to_le32(type
);
2369 tsk
->p
.tsk
.port_id
[0] = fcport
->d_id
.b
.al_pa
;
2370 tsk
->p
.tsk
.port_id
[1] = fcport
->d_id
.b
.area
;
2371 tsk
->p
.tsk
.port_id
[2] = fcport
->d_id
.b
.domain
;
2372 tsk
->p
.tsk
.vp_index
= fcport
->vp_idx
;
2373 if (type
== TCF_LUN_RESET
) {
2374 int_to_scsilun(l
, &tsk
->p
.tsk
.lun
);
2375 host_to_fcp_swap((uint8_t *)&tsk
->p
.tsk
.lun
,
2376 sizeof(tsk
->p
.tsk
.lun
));
2380 rval
= qla2x00_issue_iocb(vha
, tsk
, tsk_dma
, 0);
2381 if (rval
!= QLA_SUCCESS
) {
2382 DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB "
2383 "(%x).\n", __func__
, vha
->host_no
, name
, rval
));
2384 } else if (sts
->entry_status
!= 0) {
2385 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2386 "-- error status (%x).\n", __func__
, vha
->host_no
,
2387 sts
->entry_status
));
2388 rval
= QLA_FUNCTION_FAILED
;
2389 } else if (sts
->comp_status
!=
2390 __constant_cpu_to_le16(CS_COMPLETE
)) {
2391 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2392 "-- completion status (%x).\n", __func__
,
2393 vha
->host_no
, le16_to_cpu(sts
->comp_status
)));
2394 rval
= QLA_FUNCTION_FAILED
;
2395 } else if (!(le16_to_cpu(sts
->scsi_status
) &
2396 SS_RESPONSE_INFO_LEN_VALID
)) {
2397 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2398 "-- no response info (%x).\n", __func__
, vha
->host_no
,
2399 le16_to_cpu(sts
->scsi_status
)));
2400 rval
= QLA_FUNCTION_FAILED
;
2401 } else if (le32_to_cpu(sts
->rsp_data_len
) < 4) {
2402 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2403 "-- not enough response info (%d).\n", __func__
,
2404 vha
->host_no
, le32_to_cpu(sts
->rsp_data_len
)));
2405 rval
= QLA_FUNCTION_FAILED
;
2406 } else if (sts
->data
[3]) {
2407 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2408 "-- response (%x).\n", __func__
,
2409 vha
->host_no
, sts
->data
[3]));
2410 rval
= QLA_FUNCTION_FAILED
;
2413 /* Issue marker IOCB. */
2414 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
2415 type
== TCF_LUN_RESET
? MK_SYNC_ID_LUN
: MK_SYNC_ID
);
2416 if (rval2
!= QLA_SUCCESS
) {
2417 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
2418 "(%x).\n", __func__
, vha
->host_no
, rval2
));
2420 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2423 dma_pool_free(ha
->s_dma_pool
, tsk
, tsk_dma
);
2429 qla24xx_abort_target(struct fc_port
*fcport
, unsigned int l
, int tag
)
2431 return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET
, fcport
, l
, tag
);
2435 qla24xx_lun_reset(struct fc_port
*fcport
, unsigned int l
, int tag
)
2437 return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET
, fcport
, l
, tag
);
2441 qla2x00_system_error(scsi_qla_host_t
*vha
)
2445 mbx_cmd_t
*mcp
= &mc
;
2446 struct qla_hw_data
*ha
= vha
->hw
;
2448 if (!IS_QLA23XX(ha
) && !IS_FWI2_CAPABLE(ha
))
2449 return QLA_FUNCTION_FAILED
;
2451 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2453 mcp
->mb
[0] = MBC_GEN_SYSTEM_ERROR
;
2454 mcp
->out_mb
= MBX_0
;
2458 rval
= qla2x00_mailbox_command(vha
, mcp
);
2460 if (rval
!= QLA_SUCCESS
) {
2461 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2462 vha
->host_no
, rval
));
2464 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2471 * qla2x00_set_serdes_params() -
2477 qla2x00_set_serdes_params(scsi_qla_host_t
*vha
, uint16_t sw_em_1g
,
2478 uint16_t sw_em_2g
, uint16_t sw_em_4g
)
2482 mbx_cmd_t
*mcp
= &mc
;
2484 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2486 mcp
->mb
[0] = MBC_SERDES_PARAMS
;
2488 mcp
->mb
[2] = sw_em_1g
| BIT_15
;
2489 mcp
->mb
[3] = sw_em_2g
| BIT_15
;
2490 mcp
->mb
[4] = sw_em_4g
| BIT_15
;
2491 mcp
->out_mb
= MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2493 mcp
->tov
= MBX_TOV_SECONDS
;
2495 rval
= qla2x00_mailbox_command(vha
, mcp
);
2497 if (rval
!= QLA_SUCCESS
) {
2499 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2500 vha
->host_no
, rval
, mcp
->mb
[0]));
2503 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2510 qla2x00_stop_firmware(scsi_qla_host_t
*vha
)
2514 mbx_cmd_t
*mcp
= &mc
;
2516 if (!IS_FWI2_CAPABLE(vha
->hw
))
2517 return QLA_FUNCTION_FAILED
;
2519 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2521 mcp
->mb
[0] = MBC_STOP_FIRMWARE
;
2522 mcp
->out_mb
= MBX_0
;
2526 rval
= qla2x00_mailbox_command(vha
, mcp
);
2528 if (rval
!= QLA_SUCCESS
) {
2529 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2530 vha
->host_no
, rval
));
2531 if (mcp
->mb
[0] == MBS_INVALID_COMMAND
)
2532 rval
= QLA_INVALID_COMMAND
;
2534 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2541 qla2x00_enable_eft_trace(scsi_qla_host_t
*vha
, dma_addr_t eft_dma
,
2546 mbx_cmd_t
*mcp
= &mc
;
2548 if (!IS_FWI2_CAPABLE(vha
->hw
))
2549 return QLA_FUNCTION_FAILED
;
2551 if (unlikely(pci_channel_offline(vha
->hw
->pdev
)))
2552 return QLA_FUNCTION_FAILED
;
2554 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2556 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2557 mcp
->mb
[1] = TC_EFT_ENABLE
;
2558 mcp
->mb
[2] = LSW(eft_dma
);
2559 mcp
->mb
[3] = MSW(eft_dma
);
2560 mcp
->mb
[4] = LSW(MSD(eft_dma
));
2561 mcp
->mb
[5] = MSW(MSD(eft_dma
));
2562 mcp
->mb
[6] = buffers
;
2563 mcp
->mb
[7] = TC_AEN_DISABLE
;
2564 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2565 mcp
->in_mb
= MBX_1
|MBX_0
;
2566 mcp
->tov
= MBX_TOV_SECONDS
;
2568 rval
= qla2x00_mailbox_command(vha
, mcp
);
2569 if (rval
!= QLA_SUCCESS
) {
2570 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2571 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2573 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2580 qla2x00_disable_eft_trace(scsi_qla_host_t
*vha
)
2584 mbx_cmd_t
*mcp
= &mc
;
2586 if (!IS_FWI2_CAPABLE(vha
->hw
))
2587 return QLA_FUNCTION_FAILED
;
2589 if (unlikely(pci_channel_offline(vha
->hw
->pdev
)))
2590 return QLA_FUNCTION_FAILED
;
2592 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2594 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2595 mcp
->mb
[1] = TC_EFT_DISABLE
;
2596 mcp
->out_mb
= MBX_1
|MBX_0
;
2597 mcp
->in_mb
= MBX_1
|MBX_0
;
2598 mcp
->tov
= MBX_TOV_SECONDS
;
2600 rval
= qla2x00_mailbox_command(vha
, mcp
);
2601 if (rval
!= QLA_SUCCESS
) {
2602 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2603 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2605 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2612 qla2x00_enable_fce_trace(scsi_qla_host_t
*vha
, dma_addr_t fce_dma
,
2613 uint16_t buffers
, uint16_t *mb
, uint32_t *dwords
)
2617 mbx_cmd_t
*mcp
= &mc
;
2619 if (!IS_QLA25XX(vha
->hw
) && !IS_QLA81XX(vha
->hw
))
2620 return QLA_FUNCTION_FAILED
;
2622 if (unlikely(pci_channel_offline(vha
->hw
->pdev
)))
2623 return QLA_FUNCTION_FAILED
;
2625 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2627 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2628 mcp
->mb
[1] = TC_FCE_ENABLE
;
2629 mcp
->mb
[2] = LSW(fce_dma
);
2630 mcp
->mb
[3] = MSW(fce_dma
);
2631 mcp
->mb
[4] = LSW(MSD(fce_dma
));
2632 mcp
->mb
[5] = MSW(MSD(fce_dma
));
2633 mcp
->mb
[6] = buffers
;
2634 mcp
->mb
[7] = TC_AEN_DISABLE
;
2636 mcp
->mb
[9] = TC_FCE_DEFAULT_RX_SIZE
;
2637 mcp
->mb
[10] = TC_FCE_DEFAULT_TX_SIZE
;
2638 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2640 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2641 mcp
->tov
= MBX_TOV_SECONDS
;
2643 rval
= qla2x00_mailbox_command(vha
, mcp
);
2644 if (rval
!= QLA_SUCCESS
) {
2645 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2646 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2648 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2651 memcpy(mb
, mcp
->mb
, 8 * sizeof(*mb
));
2660 qla2x00_disable_fce_trace(scsi_qla_host_t
*vha
, uint64_t *wr
, uint64_t *rd
)
2664 mbx_cmd_t
*mcp
= &mc
;
2666 if (!IS_FWI2_CAPABLE(vha
->hw
))
2667 return QLA_FUNCTION_FAILED
;
2669 if (unlikely(pci_channel_offline(vha
->hw
->pdev
)))
2670 return QLA_FUNCTION_FAILED
;
2672 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2674 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2675 mcp
->mb
[1] = TC_FCE_DISABLE
;
2676 mcp
->mb
[2] = TC_FCE_DISABLE_TRACE
;
2677 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
2678 mcp
->in_mb
= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2680 mcp
->tov
= MBX_TOV_SECONDS
;
2682 rval
= qla2x00_mailbox_command(vha
, mcp
);
2683 if (rval
!= QLA_SUCCESS
) {
2684 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2685 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2687 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2690 *wr
= (uint64_t) mcp
->mb
[5] << 48 |
2691 (uint64_t) mcp
->mb
[4] << 32 |
2692 (uint64_t) mcp
->mb
[3] << 16 |
2693 (uint64_t) mcp
->mb
[2];
2695 *rd
= (uint64_t) mcp
->mb
[9] << 48 |
2696 (uint64_t) mcp
->mb
[8] << 32 |
2697 (uint64_t) mcp
->mb
[7] << 16 |
2698 (uint64_t) mcp
->mb
[6];
2705 qla2x00_read_sfp(scsi_qla_host_t
*vha
, dma_addr_t sfp_dma
, uint16_t addr
,
2706 uint16_t off
, uint16_t count
)
2710 mbx_cmd_t
*mcp
= &mc
;
2712 if (!IS_FWI2_CAPABLE(vha
->hw
))
2713 return QLA_FUNCTION_FAILED
;
2715 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2717 mcp
->mb
[0] = MBC_READ_SFP
;
2719 mcp
->mb
[2] = MSW(sfp_dma
);
2720 mcp
->mb
[3] = LSW(sfp_dma
);
2721 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
2722 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
2726 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2728 mcp
->tov
= MBX_TOV_SECONDS
;
2730 rval
= qla2x00_mailbox_command(vha
, mcp
);
2732 if (rval
!= QLA_SUCCESS
) {
2733 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2734 vha
->host_no
, rval
, mcp
->mb
[0]));
2736 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2743 qla2x00_set_idma_speed(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2744 uint16_t port_speed
, uint16_t *mb
)
2748 mbx_cmd_t
*mcp
= &mc
;
2750 if (!IS_IIDMA_CAPABLE(vha
->hw
))
2751 return QLA_FUNCTION_FAILED
;
2753 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2755 mcp
->mb
[0] = MBC_PORT_PARAMS
;
2756 mcp
->mb
[1] = loop_id
;
2758 if (IS_QLA81XX(vha
->hw
))
2759 mcp
->mb
[3] = port_speed
& (BIT_5
|BIT_4
|BIT_3
|BIT_2
|BIT_1
|BIT_0
);
2761 mcp
->mb
[3] = port_speed
& (BIT_2
|BIT_1
|BIT_0
);
2762 mcp
->mb
[9] = vha
->vp_idx
;
2763 mcp
->out_mb
= MBX_9
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2764 mcp
->in_mb
= MBX_3
|MBX_1
|MBX_0
;
2765 mcp
->tov
= MBX_TOV_SECONDS
;
2767 rval
= qla2x00_mailbox_command(vha
, mcp
);
2769 /* Return mailbox statuses. */
2776 if (rval
!= QLA_SUCCESS
) {
2777 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2778 vha
->host_no
, rval
));
2780 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2787 qla24xx_report_id_acquisition(scsi_qla_host_t
*vha
,
2788 struct vp_rpt_id_entry_24xx
*rptid_entry
)
2791 uint16_t stat
= le16_to_cpu(rptid_entry
->vp_idx
);
2792 struct qla_hw_data
*ha
= vha
->hw
;
2793 scsi_qla_host_t
*vp
;
2794 scsi_qla_host_t
*tvp
;
2796 if (rptid_entry
->entry_status
!= 0)
2799 if (rptid_entry
->format
== 0) {
2800 DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d,"
2801 " number of VPs acquired %d\n", __func__
, vha
->host_no
,
2802 MSB(le16_to_cpu(rptid_entry
->vp_count
)),
2803 LSB(le16_to_cpu(rptid_entry
->vp_count
))));
2804 DEBUG15(printk("%s primary port id %02x%02x%02x\n", __func__
,
2805 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2806 rptid_entry
->port_id
[0]));
2807 } else if (rptid_entry
->format
== 1) {
2809 DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled "
2811 "with port id %02x%02x%02x\n", __func__
, vha
->host_no
,
2813 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2814 rptid_entry
->port_id
[0]));
2817 if (vp_idx
== 0 && (MSB(stat
) != 1))
2820 if (MSB(stat
) == 1) {
2821 DEBUG2(printk("scsi(%ld): Could not acquire ID for "
2822 "VP[%d].\n", vha
->host_no
, vp_idx
));
2826 list_for_each_entry_safe(vp
, tvp
, &ha
->vp_list
, list
)
2827 if (vp_idx
== vp
->vp_idx
)
2832 vp
->d_id
.b
.domain
= rptid_entry
->port_id
[2];
2833 vp
->d_id
.b
.area
= rptid_entry
->port_id
[1];
2834 vp
->d_id
.b
.al_pa
= rptid_entry
->port_id
[0];
2837 * Cannot configure here as we are still sitting on the
2838 * response queue. Handle it in dpc context.
2840 set_bit(VP_IDX_ACQUIRED
, &vp
->vp_flags
);
2843 set_bit(REGISTER_FC4_NEEDED
, &vp
->dpc_flags
);
2844 set_bit(REGISTER_FDMI_NEEDED
, &vp
->dpc_flags
);
2845 set_bit(VP_DPC_NEEDED
, &vha
->dpc_flags
);
2846 qla2xxx_wake_dpc(vha
);
2851 * qla24xx_modify_vp_config
2852 * Change VP configuration for vha
2855 * vha = adapter block pointer.
2858 * qla2xxx local function return status code.
2864 qla24xx_modify_vp_config(scsi_qla_host_t
*vha
)
2867 struct vp_config_entry_24xx
*vpmod
;
2868 dma_addr_t vpmod_dma
;
2869 struct qla_hw_data
*ha
= vha
->hw
;
2870 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2872 /* This can be called by the parent */
2874 vpmod
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vpmod_dma
);
2876 DEBUG2_3(printk("%s(%ld): failed to allocate Modify VP "
2877 "IOCB.\n", __func__
, vha
->host_no
));
2878 return QLA_MEMORY_ALLOC_FAILED
;
2881 memset(vpmod
, 0, sizeof(struct vp_config_entry_24xx
));
2882 vpmod
->entry_type
= VP_CONFIG_IOCB_TYPE
;
2883 vpmod
->entry_count
= 1;
2884 vpmod
->command
= VCT_COMMAND_MOD_ENABLE_VPS
;
2885 vpmod
->vp_count
= 1;
2886 vpmod
->vp_index1
= vha
->vp_idx
;
2887 vpmod
->options_idx1
= BIT_3
|BIT_4
|BIT_5
;
2888 memcpy(vpmod
->node_name_idx1
, vha
->node_name
, WWN_SIZE
);
2889 memcpy(vpmod
->port_name_idx1
, vha
->port_name
, WWN_SIZE
);
2890 vpmod
->entry_count
= 1;
2892 rval
= qla2x00_issue_iocb(base_vha
, vpmod
, vpmod_dma
, 0);
2893 if (rval
!= QLA_SUCCESS
) {
2894 DEBUG2_3_11(printk("%s(%ld): failed to issue VP config IOCB"
2895 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2896 } else if (vpmod
->comp_status
!= 0) {
2897 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2898 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2899 vpmod
->comp_status
));
2900 rval
= QLA_FUNCTION_FAILED
;
2901 } else if (vpmod
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2902 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2903 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2904 le16_to_cpu(vpmod
->comp_status
)));
2905 rval
= QLA_FUNCTION_FAILED
;
2908 DEBUG11(printk("%s(%ld): done.\n", __func__
,
2909 base_vha
->host_no
));
2910 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_INITIALIZING
);
2912 dma_pool_free(ha
->s_dma_pool
, vpmod
, vpmod_dma
);
2918 * qla24xx_control_vp
2919 * Enable a virtual port for given host
2922 * ha = adapter block pointer.
2923 * vhba = virtual adapter (unused)
2924 * index = index number for enabled VP
2927 * qla2xxx local function return status code.
2933 qla24xx_control_vp(scsi_qla_host_t
*vha
, int cmd
)
2937 struct vp_ctrl_entry_24xx
*vce
;
2939 struct qla_hw_data
*ha
= vha
->hw
;
2940 int vp_index
= vha
->vp_idx
;
2941 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2943 DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__
,
2944 vha
->host_no
, vp_index
));
2946 if (vp_index
== 0 || vp_index
>= ha
->max_npiv_vports
)
2947 return QLA_PARAMETER_ERROR
;
2949 vce
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vce_dma
);
2951 DEBUG2_3(printk("%s(%ld): "
2952 "failed to allocate VP Control IOCB.\n", __func__
,
2953 base_vha
->host_no
));
2954 return QLA_MEMORY_ALLOC_FAILED
;
2956 memset(vce
, 0, sizeof(struct vp_ctrl_entry_24xx
));
2958 vce
->entry_type
= VP_CTRL_IOCB_TYPE
;
2959 vce
->entry_count
= 1;
2960 vce
->command
= cpu_to_le16(cmd
);
2961 vce
->vp_count
= __constant_cpu_to_le16(1);
2963 /* index map in firmware starts with 1; decrement index
2964 * this is ok as we never use index 0
2966 map
= (vp_index
- 1) / 8;
2967 pos
= (vp_index
- 1) & 7;
2968 mutex_lock(&ha
->vport_lock
);
2969 vce
->vp_idx_map
[map
] |= 1 << pos
;
2970 mutex_unlock(&ha
->vport_lock
);
2972 rval
= qla2x00_issue_iocb(base_vha
, vce
, vce_dma
, 0);
2973 if (rval
!= QLA_SUCCESS
) {
2974 DEBUG2_3_11(printk("%s(%ld): failed to issue VP control IOCB"
2975 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2976 printk("%s(%ld): failed to issue VP control IOCB"
2977 "(%x).\n", __func__
, base_vha
->host_no
, rval
);
2978 } else if (vce
->entry_status
!= 0) {
2979 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2980 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2981 vce
->entry_status
));
2982 printk("%s(%ld): failed to complete IOCB "
2983 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2985 rval
= QLA_FUNCTION_FAILED
;
2986 } else if (vce
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2987 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2988 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2989 le16_to_cpu(vce
->comp_status
)));
2990 printk("%s(%ld): failed to complete IOCB "
2991 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2992 le16_to_cpu(vce
->comp_status
));
2993 rval
= QLA_FUNCTION_FAILED
;
2995 DEBUG2(printk("%s(%ld): done.\n", __func__
, base_vha
->host_no
));
2998 dma_pool_free(ha
->s_dma_pool
, vce
, vce_dma
);
3004 * qla2x00_send_change_request
3005 * Receive or disable RSCN request from fabric controller
3008 * ha = adapter block pointer
3009 * format = registration format:
3011 * 1 - Fabric detected registration
3012 * 2 - N_port detected registration
3013 * 3 - Full registration
3014 * FF - clear registration
3015 * vp_idx = Virtual port index
3018 * qla2x00 local function return status code.
3025 qla2x00_send_change_request(scsi_qla_host_t
*vha
, uint16_t format
,
3030 mbx_cmd_t
*mcp
= &mc
;
3033 * This command is implicitly executed by firmware during login for the
3037 return QLA_FUNCTION_FAILED
;
3039 mcp
->mb
[0] = MBC_SEND_CHANGE_REQUEST
;
3040 mcp
->mb
[1] = format
;
3041 mcp
->mb
[9] = vp_idx
;
3042 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
3043 mcp
->in_mb
= MBX_0
|MBX_1
;
3044 mcp
->tov
= MBX_TOV_SECONDS
;
3046 rval
= qla2x00_mailbox_command(vha
, mcp
);
3048 if (rval
== QLA_SUCCESS
) {
3049 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
3059 qla2x00_dump_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t addr
,
3064 mbx_cmd_t
*mcp
= &mc
;
3066 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3068 if (MSW(addr
) || IS_FWI2_CAPABLE(vha
->hw
)) {
3069 mcp
->mb
[0] = MBC_DUMP_RISC_RAM_EXTENDED
;
3070 mcp
->mb
[8] = MSW(addr
);
3071 mcp
->out_mb
= MBX_8
|MBX_0
;
3073 mcp
->mb
[0] = MBC_DUMP_RISC_RAM
;
3074 mcp
->out_mb
= MBX_0
;
3076 mcp
->mb
[1] = LSW(addr
);
3077 mcp
->mb
[2] = MSW(req_dma
);
3078 mcp
->mb
[3] = LSW(req_dma
);
3079 mcp
->mb
[6] = MSW(MSD(req_dma
));
3080 mcp
->mb
[7] = LSW(MSD(req_dma
));
3081 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
3082 if (IS_FWI2_CAPABLE(vha
->hw
)) {
3083 mcp
->mb
[4] = MSW(size
);
3084 mcp
->mb
[5] = LSW(size
);
3085 mcp
->out_mb
|= MBX_5
|MBX_4
;
3087 mcp
->mb
[4] = LSW(size
);
3088 mcp
->out_mb
|= MBX_4
;
3092 mcp
->tov
= MBX_TOV_SECONDS
;
3094 rval
= qla2x00_mailbox_command(vha
, mcp
);
3096 if (rval
!= QLA_SUCCESS
) {
3097 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
3098 vha
->host_no
, rval
, mcp
->mb
[0]));
3100 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3106 /* 84XX Support **************************************************************/
3108 struct cs84xx_mgmt_cmd
{
3110 struct verify_chip_entry_84xx req
;
3111 struct verify_chip_rsp_84xx rsp
;
3116 qla84xx_verify_chip(struct scsi_qla_host
*vha
, uint16_t *status
)
3119 struct cs84xx_mgmt_cmd
*mn
;
3122 unsigned long flags
;
3123 struct qla_hw_data
*ha
= vha
->hw
;
3125 DEBUG16(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3127 mn
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &mn_dma
);
3129 DEBUG2_3(printk("%s(%ld): failed to allocate Verify ISP84XX "
3130 "IOCB.\n", __func__
, vha
->host_no
));
3131 return QLA_MEMORY_ALLOC_FAILED
;
3135 options
= ha
->cs84xx
->fw_update
? VCO_FORCE_UPDATE
: 0;
3136 /* Diagnostic firmware? */
3137 /* options |= MENLO_DIAG_FW; */
3138 /* We update the firmware with only one data sequence. */
3139 options
|= VCO_END_OF_DATA
;
3143 memset(mn
, 0, sizeof(*mn
));
3144 mn
->p
.req
.entry_type
= VERIFY_CHIP_IOCB_TYPE
;
3145 mn
->p
.req
.entry_count
= 1;
3146 mn
->p
.req
.options
= cpu_to_le16(options
);
3148 DEBUG16(printk("%s(%ld): Dump of Verify Request.\n", __func__
,
3150 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3153 rval
= qla2x00_issue_iocb_timeout(vha
, mn
, mn_dma
, 0, 120);
3154 if (rval
!= QLA_SUCCESS
) {
3155 DEBUG2_16(printk("%s(%ld): failed to issue Verify "
3156 "IOCB (%x).\n", __func__
, vha
->host_no
, rval
));
3160 DEBUG16(printk("%s(%ld): Dump of Verify Response.\n", __func__
,
3162 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3165 status
[0] = le16_to_cpu(mn
->p
.rsp
.comp_status
);
3166 status
[1] = status
[0] == CS_VCS_CHIP_FAILURE
?
3167 le16_to_cpu(mn
->p
.rsp
.failure_code
) : 0;
3168 DEBUG2_16(printk("%s(%ld): cs=%x fc=%x\n", __func__
,
3169 vha
->host_no
, status
[0], status
[1]));
3171 if (status
[0] != CS_COMPLETE
) {
3172 rval
= QLA_FUNCTION_FAILED
;
3173 if (!(options
& VCO_DONT_UPDATE_FW
)) {
3174 DEBUG2_16(printk("%s(%ld): Firmware update "
3175 "failed. Retrying without update "
3176 "firmware.\n", __func__
, vha
->host_no
));
3177 options
|= VCO_DONT_UPDATE_FW
;
3178 options
&= ~VCO_FORCE_UPDATE
;
3182 DEBUG2_16(printk("%s(%ld): firmware updated to %x.\n",
3183 __func__
, vha
->host_no
,
3184 le32_to_cpu(mn
->p
.rsp
.fw_ver
)));
3186 /* NOTE: we only update OP firmware. */
3187 spin_lock_irqsave(&ha
->cs84xx
->access_lock
, flags
);
3188 ha
->cs84xx
->op_fw_version
=
3189 le32_to_cpu(mn
->p
.rsp
.fw_ver
);
3190 spin_unlock_irqrestore(&ha
->cs84xx
->access_lock
,
3196 dma_pool_free(ha
->s_dma_pool
, mn
, mn_dma
);
3198 if (rval
!= QLA_SUCCESS
) {
3199 DEBUG2_16(printk("%s(%ld): failed=%x.\n", __func__
,
3200 vha
->host_no
, rval
));
3202 DEBUG16(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3209 qla25xx_init_req_que(struct scsi_qla_host
*vha
, struct req_que
*req
)
3212 unsigned long flags
;
3214 mbx_cmd_t
*mcp
= &mc
;
3215 struct device_reg_25xxmq __iomem
*reg
;
3216 struct qla_hw_data
*ha
= vha
->hw
;
3218 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3219 mcp
->mb
[1] = req
->options
;
3220 mcp
->mb
[2] = MSW(LSD(req
->dma
));
3221 mcp
->mb
[3] = LSW(LSD(req
->dma
));
3222 mcp
->mb
[6] = MSW(MSD(req
->dma
));
3223 mcp
->mb
[7] = LSW(MSD(req
->dma
));
3224 mcp
->mb
[5] = req
->length
;
3226 mcp
->mb
[10] = req
->rsp
->id
;
3227 mcp
->mb
[12] = req
->qos
;
3228 mcp
->mb
[11] = req
->vp_idx
;
3229 mcp
->mb
[13] = req
->rid
;
3231 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3232 QLA_QUE_PAGE
* req
->id
);
3234 mcp
->mb
[4] = req
->id
;
3235 /* que in ptr index */
3237 /* que out ptr index */
3239 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
|
3240 MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3242 mcp
->flags
= MBX_DMA_OUT
;
3245 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3246 if (!(req
->options
& BIT_0
)) {
3247 WRT_REG_DWORD(®
->req_q_in
, 0);
3248 WRT_REG_DWORD(®
->req_q_out
, 0);
3250 req
->req_q_in
= ®
->req_q_in
;
3251 req
->req_q_out
= ®
->req_q_out
;
3252 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3254 rval
= qla2x00_mailbox_command(vha
, mcp
);
3255 if (rval
!= QLA_SUCCESS
)
3256 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x mb0=%x.\n",
3257 __func__
, vha
->host_no
, rval
, mcp
->mb
[0]));
3262 qla25xx_init_rsp_que(struct scsi_qla_host
*vha
, struct rsp_que
*rsp
)
3265 unsigned long flags
;
3267 mbx_cmd_t
*mcp
= &mc
;
3268 struct device_reg_25xxmq __iomem
*reg
;
3269 struct qla_hw_data
*ha
= vha
->hw
;
3271 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3272 mcp
->mb
[1] = rsp
->options
;
3273 mcp
->mb
[2] = MSW(LSD(rsp
->dma
));
3274 mcp
->mb
[3] = LSW(LSD(rsp
->dma
));
3275 mcp
->mb
[6] = MSW(MSD(rsp
->dma
));
3276 mcp
->mb
[7] = LSW(MSD(rsp
->dma
));
3277 mcp
->mb
[5] = rsp
->length
;
3278 mcp
->mb
[14] = rsp
->msix
->entry
;
3279 mcp
->mb
[13] = rsp
->rid
;
3281 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3282 QLA_QUE_PAGE
* rsp
->id
);
3284 mcp
->mb
[4] = rsp
->id
;
3285 /* que in ptr index */
3287 /* que out ptr index */
3289 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_9
|MBX_8
|MBX_7
3290 |MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3292 mcp
->flags
= MBX_DMA_OUT
;
3295 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3296 if (!(rsp
->options
& BIT_0
)) {
3297 WRT_REG_DWORD(®
->rsp_q_out
, 0);
3298 WRT_REG_DWORD(®
->rsp_q_in
, 0);
3301 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3303 rval
= qla2x00_mailbox_command(vha
, mcp
);
3304 if (rval
!= QLA_SUCCESS
)
3305 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x "
3306 "mb0=%x.\n", __func__
,
3307 vha
->host_no
, rval
, mcp
->mb
[0]));
3312 qla81xx_idc_ack(scsi_qla_host_t
*vha
, uint16_t *mb
)
3316 mbx_cmd_t
*mcp
= &mc
;
3318 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3320 mcp
->mb
[0] = MBC_IDC_ACK
;
3321 memcpy(&mcp
->mb
[1], mb
, QLA_IDC_ACK_REGS
* sizeof(uint16_t));
3322 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3324 mcp
->tov
= MBX_TOV_SECONDS
;
3326 rval
= qla2x00_mailbox_command(vha
, mcp
);
3328 if (rval
!= QLA_SUCCESS
) {
3329 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3330 vha
->host_no
, rval
, mcp
->mb
[0]));
3332 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3339 qla81xx_fac_get_sector_size(scsi_qla_host_t
*vha
, uint32_t *sector_size
)
3343 mbx_cmd_t
*mcp
= &mc
;
3345 if (!IS_QLA81XX(vha
->hw
))
3346 return QLA_FUNCTION_FAILED
;
3348 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3350 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3351 mcp
->mb
[1] = FAC_OPT_CMD_GET_SECTOR_SIZE
;
3352 mcp
->out_mb
= MBX_1
|MBX_0
;
3353 mcp
->in_mb
= MBX_1
|MBX_0
;
3354 mcp
->tov
= MBX_TOV_SECONDS
;
3356 rval
= qla2x00_mailbox_command(vha
, mcp
);
3358 if (rval
!= QLA_SUCCESS
) {
3359 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
3360 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3362 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3363 *sector_size
= mcp
->mb
[1];
3370 qla81xx_fac_do_write_enable(scsi_qla_host_t
*vha
, int enable
)
3374 mbx_cmd_t
*mcp
= &mc
;
3376 if (!IS_QLA81XX(vha
->hw
))
3377 return QLA_FUNCTION_FAILED
;
3379 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3381 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3382 mcp
->mb
[1] = enable
? FAC_OPT_CMD_WRITE_ENABLE
:
3383 FAC_OPT_CMD_WRITE_PROTECT
;
3384 mcp
->out_mb
= MBX_1
|MBX_0
;
3385 mcp
->in_mb
= MBX_1
|MBX_0
;
3386 mcp
->tov
= MBX_TOV_SECONDS
;
3388 rval
= qla2x00_mailbox_command(vha
, mcp
);
3390 if (rval
!= QLA_SUCCESS
) {
3391 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
3392 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3394 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3401 qla81xx_fac_erase_sector(scsi_qla_host_t
*vha
, uint32_t start
, uint32_t finish
)
3405 mbx_cmd_t
*mcp
= &mc
;
3407 if (!IS_QLA81XX(vha
->hw
))
3408 return QLA_FUNCTION_FAILED
;
3410 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3412 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3413 mcp
->mb
[1] = FAC_OPT_CMD_ERASE_SECTOR
;
3414 mcp
->mb
[2] = LSW(start
);
3415 mcp
->mb
[3] = MSW(start
);
3416 mcp
->mb
[4] = LSW(finish
);
3417 mcp
->mb
[5] = MSW(finish
);
3418 mcp
->out_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3419 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3420 mcp
->tov
= MBX_TOV_SECONDS
;
3422 rval
= qla2x00_mailbox_command(vha
, mcp
);
3424 if (rval
!= QLA_SUCCESS
) {
3425 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
3426 "mb[2]=%x.\n", __func__
, vha
->host_no
, rval
, mcp
->mb
[0],
3427 mcp
->mb
[1], mcp
->mb
[2]));
3429 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3436 qla81xx_restart_mpi_firmware(scsi_qla_host_t
*vha
)
3440 mbx_cmd_t
*mcp
= &mc
;
3442 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3444 mcp
->mb
[0] = MBC_RESTART_MPI_FW
;
3445 mcp
->out_mb
= MBX_0
;
3446 mcp
->in_mb
= MBX_0
|MBX_1
;
3447 mcp
->tov
= MBX_TOV_SECONDS
;
3449 rval
= qla2x00_mailbox_command(vha
, mcp
);
3451 if (rval
!= QLA_SUCCESS
) {
3452 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x mb[1]=0x%x.\n",
3453 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3455 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3462 qla2x00_read_edc(scsi_qla_host_t
*vha
, uint16_t dev
, uint16_t adr
,
3463 dma_addr_t sfp_dma
, uint8_t *sfp
, uint16_t len
, uint16_t opt
)
3467 mbx_cmd_t
*mcp
= &mc
;
3469 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3471 mcp
->mb
[0] = MBC_READ_SFP
;
3473 mcp
->mb
[2] = MSW(sfp_dma
);
3474 mcp
->mb
[3] = LSW(sfp_dma
);
3475 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
3476 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
3480 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3482 mcp
->tov
= MBX_TOV_SECONDS
;
3484 rval
= qla2x00_mailbox_command(vha
, mcp
);
3490 if (rval
!= QLA_SUCCESS
) {
3491 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3492 vha
->host_no
, rval
, mcp
->mb
[0]));
3494 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3501 qla2x00_write_edc(scsi_qla_host_t
*vha
, uint16_t dev
, uint16_t adr
,
3502 dma_addr_t sfp_dma
, uint8_t *sfp
, uint16_t len
, uint16_t opt
)
3506 mbx_cmd_t
*mcp
= &mc
;
3508 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3514 mcp
->mb
[0] = MBC_WRITE_SFP
;
3516 mcp
->mb
[2] = MSW(sfp_dma
);
3517 mcp
->mb
[3] = LSW(sfp_dma
);
3518 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
3519 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
3523 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3525 mcp
->tov
= MBX_TOV_SECONDS
;
3527 rval
= qla2x00_mailbox_command(vha
, mcp
);
3529 if (rval
!= QLA_SUCCESS
) {
3530 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3531 vha
->host_no
, rval
, mcp
->mb
[0]));
3533 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3540 qla2x00_get_xgmac_stats(scsi_qla_host_t
*vha
, dma_addr_t stats_dma
,
3541 uint16_t size_in_bytes
, uint16_t *actual_size
)
3545 mbx_cmd_t
*mcp
= &mc
;
3547 if (!IS_QLA81XX(vha
->hw
))
3548 return QLA_FUNCTION_FAILED
;
3550 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3552 mcp
->mb
[0] = MBC_GET_XGMAC_STATS
;
3553 mcp
->mb
[2] = MSW(stats_dma
);
3554 mcp
->mb
[3] = LSW(stats_dma
);
3555 mcp
->mb
[6] = MSW(MSD(stats_dma
));
3556 mcp
->mb
[7] = LSW(MSD(stats_dma
));
3557 mcp
->mb
[8] = size_in_bytes
>> 2;
3558 mcp
->out_mb
= MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
3559 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3560 mcp
->tov
= MBX_TOV_SECONDS
;
3562 rval
= qla2x00_mailbox_command(vha
, mcp
);
3564 if (rval
!= QLA_SUCCESS
) {
3565 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
3566 "mb[1]=0x%x mb[2]=0x%x.\n", __func__
, vha
->host_no
, rval
,
3567 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
3569 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3571 *actual_size
= mcp
->mb
[2] << 2;
3578 qla2x00_get_dcbx_params(scsi_qla_host_t
*vha
, dma_addr_t tlv_dma
,
3583 mbx_cmd_t
*mcp
= &mc
;
3585 if (!IS_QLA81XX(vha
->hw
))
3586 return QLA_FUNCTION_FAILED
;
3588 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3590 mcp
->mb
[0] = MBC_GET_DCBX_PARAMS
;
3592 mcp
->mb
[2] = MSW(tlv_dma
);
3593 mcp
->mb
[3] = LSW(tlv_dma
);
3594 mcp
->mb
[6] = MSW(MSD(tlv_dma
));
3595 mcp
->mb
[7] = LSW(MSD(tlv_dma
));
3597 mcp
->out_mb
= MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3598 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3599 mcp
->tov
= MBX_TOV_SECONDS
;
3601 rval
= qla2x00_mailbox_command(vha
, mcp
);
3603 if (rval
!= QLA_SUCCESS
) {
3604 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
3605 "mb[1]=0x%x mb[2]=0x%x.\n", __func__
, vha
->host_no
, rval
,
3606 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
3608 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3615 qla2x00_read_ram_word(scsi_qla_host_t
*vha
, uint32_t risc_addr
, uint32_t *data
)
3619 mbx_cmd_t
*mcp
= &mc
;
3621 if (!IS_FWI2_CAPABLE(vha
->hw
))
3622 return QLA_FUNCTION_FAILED
;
3624 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3626 mcp
->mb
[0] = MBC_READ_RAM_EXTENDED
;
3627 mcp
->mb
[1] = LSW(risc_addr
);
3628 mcp
->mb
[8] = MSW(risc_addr
);
3629 mcp
->out_mb
= MBX_8
|MBX_1
|MBX_0
;
3630 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_0
;
3633 rval
= qla2x00_mailbox_command(vha
, mcp
);
3634 if (rval
!= QLA_SUCCESS
) {
3635 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
3636 vha
->host_no
, rval
, mcp
->mb
[0]));
3638 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3639 *data
= mcp
->mb
[3] << 16 | mcp
->mb
[2];
3646 qla2x00_loopback_test(scsi_qla_host_t
*vha
, struct msg_echo_lb
*mreq
, uint16_t *mresp
)
3650 mbx_cmd_t
*mcp
= &mc
;
3651 uint32_t iter_cnt
= 0x1;
3653 DEBUG11(printk("scsi(%ld): entered.\n", vha
->host_no
));
3655 memset(mcp
->mb
, 0 , sizeof(mcp
->mb
));
3656 mcp
->mb
[0] = MBC_DIAGNOSTIC_LOOP_BACK
;
3657 mcp
->mb
[1] = mreq
->options
| BIT_6
; // BIT_6 specifies 64 bit addressing
3659 /* transfer count */
3660 mcp
->mb
[10] = LSW(mreq
->transfer_size
);
3661 mcp
->mb
[11] = MSW(mreq
->transfer_size
);
3663 /* send data address */
3664 mcp
->mb
[14] = LSW(mreq
->send_dma
);
3665 mcp
->mb
[15] = MSW(mreq
->send_dma
);
3666 mcp
->mb
[20] = LSW(MSD(mreq
->send_dma
));
3667 mcp
->mb
[21] = MSW(MSD(mreq
->send_dma
));
3669 /* recieve data address */
3670 mcp
->mb
[16] = LSW(mreq
->rcv_dma
);
3671 mcp
->mb
[17] = MSW(mreq
->rcv_dma
);
3672 mcp
->mb
[6] = LSW(MSD(mreq
->rcv_dma
));
3673 mcp
->mb
[7] = MSW(MSD(mreq
->rcv_dma
));
3675 /* Iteration count */
3676 mcp
->mb
[18] = LSW(iter_cnt
);
3677 mcp
->mb
[19] = MSW(iter_cnt
);
3679 mcp
->out_mb
= MBX_21
|MBX_20
|MBX_19
|MBX_18
|MBX_17
|MBX_16
|MBX_15
|
3680 MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_7
|MBX_6
|MBX_1
|MBX_0
;
3681 if (IS_QLA81XX(vha
->hw
))
3682 mcp
->out_mb
|= MBX_2
;
3683 mcp
->in_mb
= MBX_19
|MBX_18
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3685 mcp
->buf_size
= mreq
->transfer_size
;
3686 mcp
->tov
= MBX_TOV_SECONDS
;
3687 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
|IOCTL_CMD
;
3689 rval
= qla2x00_mailbox_command(vha
, mcp
);
3691 if (rval
!= QLA_SUCCESS
) {
3692 DEBUG2(printk(KERN_WARNING
3693 "(%ld): failed=%x mb[0]=0x%x "
3694 "mb[1]=0x%x mb[2]=0x%x mb[3]=0x%x mb[18]=0x%x mb[19]=0x%x. \n", vha
->host_no
, rval
,
3695 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2], mcp
->mb
[3], mcp
->mb
[18], mcp
->mb
[19]));
3697 DEBUG2(printk(KERN_WARNING
3698 "scsi(%ld): done.\n", vha
->host_no
));
3701 /* Copy mailbox information */
3702 memcpy( mresp
, mcp
->mb
, 64);
3703 mresp
[3] = mcp
->mb
[18];
3704 mresp
[4] = mcp
->mb
[19];
3709 qla2x00_echo_test(scsi_qla_host_t
*vha
, struct msg_echo_lb
*mreq
, uint16_t *mresp
)
3713 mbx_cmd_t
*mcp
= &mc
;
3714 struct qla_hw_data
*ha
= vha
->hw
;
3716 DEBUG11(printk("scsi(%ld): entered.\n", vha
->host_no
));
3718 memset(mcp
->mb
, 0 , sizeof(mcp
->mb
));
3719 mcp
->mb
[0] = MBC_DIAGNOSTIC_ECHO
;
3720 mcp
->mb
[1] = mreq
->options
| BIT_6
; /* BIT_6 specifies 64bit address */
3722 mcp
->mb
[1] |= BIT_15
;
3723 mcp
->mb
[2] = IS_QLA81XX(ha
) ? vha
->fcoe_fcf_idx
: 0;
3724 mcp
->mb
[16] = LSW(mreq
->rcv_dma
);
3725 mcp
->mb
[17] = MSW(mreq
->rcv_dma
);
3726 mcp
->mb
[6] = LSW(MSD(mreq
->rcv_dma
));
3727 mcp
->mb
[7] = MSW(MSD(mreq
->rcv_dma
));
3729 mcp
->mb
[10] = LSW(mreq
->transfer_size
);
3731 mcp
->mb
[14] = LSW(mreq
->send_dma
);
3732 mcp
->mb
[15] = MSW(mreq
->send_dma
);
3733 mcp
->mb
[20] = LSW(MSD(mreq
->send_dma
));
3734 mcp
->mb
[21] = MSW(MSD(mreq
->send_dma
));
3736 mcp
->out_mb
= MBX_21
|MBX_20
|MBX_17
|MBX_16
|MBX_15
|
3737 MBX_14
|MBX_10
|MBX_7
|MBX_6
|MBX_1
|MBX_0
;
3739 mcp
->out_mb
|= MBX_2
;
3742 if (IS_QLA24XX_TYPE(ha
) || IS_QLA25XX(ha
) || IS_QLA81XX(ha
))
3743 mcp
->in_mb
|= MBX_1
;
3745 mcp
->in_mb
|= MBX_3
;
3747 mcp
->tov
= MBX_TOV_SECONDS
;
3748 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
|IOCTL_CMD
;
3749 mcp
->buf_size
= mreq
->transfer_size
;
3751 rval
= qla2x00_mailbox_command(vha
, mcp
);
3753 if (rval
!= QLA_SUCCESS
) {
3754 DEBUG2(printk(KERN_WARNING
3755 "(%ld): failed=%x mb[0]=0x%x mb[1]=0x%x.\n",
3756 vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3758 DEBUG2(printk(KERN_WARNING
3759 "scsi(%ld): done.\n", vha
->host_no
));
3762 /* Copy mailbox information */
3763 memcpy( mresp
, mcp
->mb
, 32);
3767 qla84xx_reset_chip(scsi_qla_host_t
*ha
, uint16_t enable_diagnostic
,
3768 uint16_t *cmd_status
)
3772 mbx_cmd_t
*mcp
= &mc
;
3774 DEBUG16(printk("%s(%ld): enable_diag=%d entered.\n", __func__
,
3775 ha
->host_no
, enable_diagnostic
));
3777 mcp
->mb
[0] = MBC_ISP84XX_RESET
;
3778 mcp
->mb
[1] = enable_diagnostic
;
3779 mcp
->out_mb
= MBX_1
|MBX_0
;
3780 mcp
->in_mb
= MBX_1
|MBX_0
;
3781 mcp
->tov
= MBX_TOV_SECONDS
;
3782 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
|IOCTL_CMD
;
3783 rval
= qla2x00_mailbox_command(ha
, mcp
);
3785 /* Return mailbox statuses. */
3786 *cmd_status
= mcp
->mb
[0];
3787 if (rval
!= QLA_SUCCESS
)
3788 DEBUG16(printk("%s(%ld): failed=%x.\n", __func__
, ha
->host_no
,
3791 DEBUG16(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
3797 qla2x00_write_ram_word(scsi_qla_host_t
*vha
, uint32_t risc_addr
, uint32_t data
)
3801 mbx_cmd_t
*mcp
= &mc
;
3803 if (!IS_FWI2_CAPABLE(vha
->hw
))
3804 return QLA_FUNCTION_FAILED
;
3806 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3808 mcp
->mb
[0] = MBC_WRITE_RAM_WORD_EXTENDED
;
3809 mcp
->mb
[1] = LSW(risc_addr
);
3810 mcp
->mb
[2] = LSW(data
);
3811 mcp
->mb
[3] = MSW(data
);
3812 mcp
->mb
[8] = MSW(risc_addr
);
3813 mcp
->out_mb
= MBX_8
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3817 rval
= qla2x00_mailbox_command(vha
, mcp
);
3818 if (rval
!= QLA_SUCCESS
) {
3819 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
3820 vha
->host_no
, rval
, mcp
->mb
[0]));
3822 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3829 qla2x00_get_data_rate(scsi_qla_host_t
*vha
)
3833 mbx_cmd_t
*mcp
= &mc
;
3834 struct qla_hw_data
*ha
= vha
->hw
;
3836 if (!IS_FWI2_CAPABLE(ha
))
3837 return QLA_FUNCTION_FAILED
;
3839 DEBUG11(printk(KERN_INFO
"%s(%ld): entered.\n", __func__
, vha
->host_no
));
3841 mcp
->mb
[0] = MBC_DATA_RATE
;
3843 mcp
->out_mb
= MBX_1
|MBX_0
;
3844 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3845 mcp
->tov
= MBX_TOV_SECONDS
;
3847 rval
= qla2x00_mailbox_command(vha
, mcp
);
3848 if (rval
!= QLA_SUCCESS
) {
3849 DEBUG2_3_11(printk(KERN_INFO
"%s(%ld): failed=%x mb[0]=%x.\n",
3850 __func__
, vha
->host_no
, rval
, mcp
->mb
[0]));
3852 DEBUG11(printk(KERN_INFO
3853 "%s(%ld): done.\n", __func__
, vha
->host_no
));
3854 if (mcp
->mb
[1] != 0x7)
3855 ha
->link_data_rate
= mcp
->mb
[1];