2 * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
3 * Amiga MacroSystemUS WarpEngine SCSI controller.
4 * Amiga Technologies/DKB A4091 SCSI controller.
6 * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
7 * plus modifications of the 53c7xx.c driver to support the Amiga.
9 * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org>
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/interrupt.h>
15 #include <linux/zorro.h>
16 #include <linux/slab.h>
18 #include <asm/amigahw.h>
19 #include <asm/amigaints.h>
21 #include <scsi/scsi_host.h>
22 #include <scsi/scsi_transport_spi.h>
26 MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>");
27 MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver");
28 MODULE_LICENSE("GPL");
31 static struct scsi_host_template zorro7xx_scsi_driver_template
= {
32 .proc_name
= "zorro7xx",
34 .module
= THIS_MODULE
,
37 static struct zorro_driver_data
{
40 int absolute
; /* offset is absolute address */
41 } zorro7xx_driver_data
[] __devinitdata
= {
42 { .name
= "PowerUP 603e+", .offset
= 0xf40000, .absolute
= 1 },
43 { .name
= "WarpEngine 40xx", .offset
= 0x40000 },
44 { .name
= "A4091", .offset
= 0x800000 },
45 { .name
= "GForce 040/060", .offset
= 0x40000 },
49 static struct zorro_device_id zorro7xx_zorro_tbl
[] __devinitdata
= {
51 .id
= ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS
,
52 .driver_data
= (unsigned long)&zorro7xx_driver_data
[0],
55 .id
= ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx
,
56 .driver_data
= (unsigned long)&zorro7xx_driver_data
[1],
59 .id
= ZORRO_PROD_CBM_A4091_1
,
60 .driver_data
= (unsigned long)&zorro7xx_driver_data
[2],
63 .id
= ZORRO_PROD_CBM_A4091_2
,
64 .driver_data
= (unsigned long)&zorro7xx_driver_data
[2],
67 .id
= ZORRO_PROD_GVP_GFORCE_040_060
,
68 .driver_data
= (unsigned long)&zorro7xx_driver_data
[3],
73 static int __devinit
zorro7xx_init_one(struct zorro_dev
*z
,
74 const struct zorro_device_id
*ent
)
76 struct Scsi_Host
*host
;
77 struct NCR_700_Host_Parameters
*hostdata
;
78 struct zorro_driver_data
*zdd
;
79 unsigned long board
, ioaddr
;
81 board
= zorro_resource_start(z
);
82 zdd
= (struct zorro_driver_data
*)ent
->driver_data
;
87 ioaddr
= board
+ zdd
->offset
;
90 if (!zorro_request_device(z
, zdd
->name
)) {
91 printk(KERN_ERR
"zorro7xx: cannot reserve region 0x%lx, abort\n",
96 hostdata
= kzalloc(sizeof(struct NCR_700_Host_Parameters
), GFP_KERNEL
);
98 printk(KERN_ERR
"zorro7xx: Failed to allocate host data\n");
102 /* Fill in the required pieces of hostdata */
103 if (ioaddr
> 0x01000000)
104 hostdata
->base
= ioremap(ioaddr
, zorro_resource_len(z
));
106 hostdata
->base
= (void __iomem
*)ZTWO_VADDR(ioaddr
);
108 hostdata
->clock
= 50;
109 hostdata
->chip710
= 1;
111 /* Settings for at least WarpEngine 40xx */
112 hostdata
->ctest7_extra
= CTEST7_TT1
;
114 zorro7xx_scsi_driver_template
.name
= zdd
->name
;
116 /* and register the chip */
117 host
= NCR_700_detect(&zorro7xx_scsi_driver_template
, hostdata
,
120 printk(KERN_ERR
"zorro7xx: No host detected; "
121 "board configuration problem?\n");
127 host
->irq
= IRQ_AMIGA_PORTS
;
129 if (request_irq(host
->irq
, NCR_700_intr
, IRQF_SHARED
, "zorro7xx-scsi",
131 printk(KERN_ERR
"zorro7xx: request_irq failed\n");
135 zorro_set_drvdata(z
, host
);
136 scsi_scan_host(host
);
143 if (ioaddr
> 0x01000000)
144 iounmap(hostdata
->base
);
147 zorro_release_device(z
);
152 static __devexit
void zorro7xx_remove_one(struct zorro_dev
*z
)
154 struct Scsi_Host
*host
= zorro_get_drvdata(z
);
155 struct NCR_700_Host_Parameters
*hostdata
= shost_priv(host
);
157 scsi_remove_host(host
);
159 NCR_700_release(host
);
161 free_irq(host
->irq
, host
);
162 zorro_release_device(z
);
165 static struct zorro_driver zorro7xx_driver
= {
166 .name
= "zorro7xx-scsi",
167 .id_table
= zorro7xx_zorro_tbl
,
168 .probe
= zorro7xx_init_one
,
169 .remove
= __devexit_p(zorro7xx_remove_one
),
172 static int __init
zorro7xx_scsi_init(void)
174 return zorro_register_driver(&zorro7xx_driver
);
177 static void __exit
zorro7xx_scsi_exit(void)
179 zorro_unregister_driver(&zorro7xx_driver
);
182 module_init(zorro7xx_scsi_init
);
183 module_exit(zorro7xx_scsi_exit
);