2 * Watchdog driver for SiByte SB1 SoCs
4 * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@lsi.com>
6 * This driver is intended to make the second of two hardware watchdogs
7 * on the Sibyte 12XX and 11XX SoCs available to the user. There are two
8 * such devices available on the SoC, but it seems that there isn't an
9 * enumeration class for watchdogs in Linux like there is for RTCs.
10 * The second is used rather than the first because it uses IRQ 1,
11 * thereby avoiding all that IRQ 0 problematic nonsense.
13 * I have not tried this driver on a 1480 processor; it might work
14 * just well enough to really screw things up.
16 * It is a simple timer, and there is an interrupt that is raised the
17 * first time the timer expires. The second time it expires, the chip
18 * is reset and there is no way to redirect that NMI. Which could
19 * be problematic in some cases where this chip is sitting on the HT
20 * bus and has just taken responsibility for providing a cache block.
21 * Since the reset can't be redirected to the external reset pin, it is
22 * possible that other HT connected processors might hang and not reset.
23 * For Linux, a soft reset would probably be even worse than a hard reset.
26 * The timer takes 23 bits of a 64 bit register (?) as a count value,
27 * and decrements the count every microsecond, for a max value of
28 * 0x7fffff usec or about 8.3ish seconds.
30 * This watchdog borrows some user semantics from the softdog driver,
31 * in that if you close the fd, it leaves the watchdog running, unless
32 * you previously wrote a 'V' to the fd, in which case it disables
33 * the watchdog when you close the fd like some other drivers.
35 * Based on various other watchdog drivers, which are probably all
36 * loosely based on something Alan Cox wrote years ago.
38 * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
39 * All Rights Reserved.
41 * This program is free software; you can redistribute it and/or
42 * modify it under the terms of the GNU General Public License
43 * version 1 or 2 as published by the Free Software Foundation.
46 #include <linux/module.h>
48 #include <linux/uaccess.h>
50 #include <linux/reboot.h>
51 #include <linux/miscdevice.h>
52 #include <linux/watchdog.h>
53 #include <linux/interrupt.h>
55 #include <asm/sibyte/sb1250.h>
56 #include <asm/sibyte/sb1250_regs.h>
57 #include <asm/sibyte/sb1250_int.h>
58 #include <asm/sibyte/sb1250_scd.h>
60 static DEFINE_SPINLOCK(sbwd_lock
);
63 * set the initial count value of a timer
65 * wdog is the iomem address of the cfg register
67 void sbwdog_set(char __iomem
*wdog
, unsigned long t
)
69 spin_lock(&sbwd_lock
);
70 __raw_writeb(0, wdog
);
71 __raw_writeq(t
& 0x7fffffUL
, wdog
- 0x10);
72 spin_unlock(&sbwd_lock
);
76 * cause the timer to [re]load it's initial count and start counting
79 * wdog is the iomem address of the cfg register
81 void sbwdog_pet(char __iomem
*wdog
)
83 spin_lock(&sbwd_lock
);
84 __raw_writeb(__raw_readb(wdog
) | 1, wdog
);
85 spin_unlock(&sbwd_lock
);
88 static unsigned long sbwdog_gate
; /* keeps it to one thread only */
89 static char __iomem
*kern_dog
= (char __iomem
*)(IO_BASE
+ (A_SCD_WDOG_CFG_0
));
90 static char __iomem
*user_dog
= (char __iomem
*)(IO_BASE
+ (A_SCD_WDOG_CFG_1
));
91 static unsigned long timeout
= 0x7fffffUL
; /* useconds: 8.3ish secs. */
92 static int expect_close
;
94 static const struct watchdog_info ident
= {
95 .options
= WDIOF_CARDRESET
| WDIOF_SETTIMEOUT
|
96 WDIOF_KEEPALIVEPING
| WDIOF_MAGICCLOSE
,
97 .identity
= "SiByte Watchdog",
101 * Allow only a single thread to walk the dog
103 static int sbwdog_open(struct inode
*inode
, struct file
*file
)
105 nonseekable_open(inode
, file
);
106 if (test_and_set_bit(0, &sbwdog_gate
))
108 __module_get(THIS_MODULE
);
113 sbwdog_set(user_dog
, timeout
);
114 __raw_writeb(1, user_dog
);
120 * Put the dog back in the kennel.
122 static int sbwdog_release(struct inode
*inode
, struct file
*file
)
124 if (expect_close
== 42) {
125 __raw_writeb(0, user_dog
);
126 module_put(THIS_MODULE
);
129 "%s: Unexpected close, not stopping watchdog!\n",
131 sbwdog_pet(user_dog
);
133 clear_bit(0, &sbwdog_gate
);
142 static ssize_t
sbwdog_write(struct file
*file
, const char __user
*data
,
143 size_t len
, loff_t
*ppos
)
153 for (i
= 0; i
!= len
; i
++) {
156 if (get_user(c
, data
+ i
))
161 sbwdog_pet(user_dog
);
167 static long sbwdog_ioctl(struct file
*file
, unsigned int cmd
,
172 void __user
*argp
= (void __user
*)arg
;
173 int __user
*p
= argp
;
176 case WDIOC_GETSUPPORT
:
177 ret
= copy_to_user(argp
, &ident
, sizeof(ident
)) ? -EFAULT
: 0;
180 case WDIOC_GETSTATUS
:
181 case WDIOC_GETBOOTSTATUS
:
182 ret
= put_user(0, p
);
185 case WDIOC_KEEPALIVE
:
186 sbwdog_pet(user_dog
);
190 case WDIOC_SETTIMEOUT
:
191 ret
= get_user(time
, p
);
196 if (time
> 0x7fffffUL
) {
201 sbwdog_set(user_dog
, timeout
);
202 sbwdog_pet(user_dog
);
204 case WDIOC_GETTIMEOUT
:
206 * get the remaining count from the ... count register
207 * which is 1*8 before the config register
209 ret
= put_user(__raw_readq(user_dog
- 8) / 1000000, p
);
216 * Notifier for system down
218 static int sbwdog_notify_sys(struct notifier_block
*this, unsigned long code
,
221 if (code
== SYS_DOWN
|| code
== SYS_HALT
) {
225 __raw_writeb(0, user_dog
);
226 __raw_writeb(0, kern_dog
);
232 static const struct file_operations sbwdog_fops
= {
233 .owner
= THIS_MODULE
,
235 .write
= sbwdog_write
,
236 .unlocked_ioctl
= sbwdog_ioctl
,
238 .release
= sbwdog_release
,
241 static struct miscdevice sbwdog_miscdev
= {
242 .minor
= WATCHDOG_MINOR
,
244 .fops
= &sbwdog_fops
,
247 static struct notifier_block sbwdog_notifier
= {
248 .notifier_call
= sbwdog_notify_sys
,
254 * doesn't do a whole lot for user, but oh so cleverly written so kernel
255 * code can use it to re-up the watchdog, thereby saving the kernel from
256 * having to create and maintain a timer, just to tickle another timer,
257 * which is just so wrong.
259 irqreturn_t
sbwdog_interrupt(int irq
, void *addr
)
261 unsigned long wd_init
;
262 char *wd_cfg_reg
= (char *)addr
;
265 cfg
= __raw_readb(wd_cfg_reg
);
266 wd_init
= __raw_readq(wd_cfg_reg
- 8) & 0x7fffff;
269 * if it's the second watchdog timer, it's for those users
271 if (wd_cfg_reg
== user_dog
)
272 printk(KERN_CRIT
"%s in danger of initiating system reset "
273 "in %ld.%01ld seconds\n",
275 wd_init
/ 1000000, (wd_init
/ 100000) % 10);
279 __raw_writeb(cfg
, wd_cfg_reg
);
284 static int __init
sbwdog_init(void)
289 * register a reboot notifier
291 ret
= register_reboot_notifier(&sbwdog_notifier
);
294 "%s: cannot register reboot notifier (err=%d)\n",
295 ident
.identity
, ret
);
303 ret
= request_irq(1, sbwdog_interrupt
, IRQF_DISABLED
| IRQF_SHARED
,
304 ident
.identity
, (void *)user_dog
);
306 printk(KERN_ERR
"%s: failed to request irq 1 - %d\n",
307 ident
.identity
, ret
);
311 ret
= misc_register(&sbwdog_miscdev
);
313 printk(KERN_INFO
"%s: timeout is %ld.%ld secs\n",
315 timeout
/ 1000000, (timeout
/ 100000) % 10);
317 free_irq(1, (void *)user_dog
);
321 static void __exit
sbwdog_exit(void)
323 misc_deregister(&sbwdog_miscdev
);
326 module_init(sbwdog_init
);
327 module_exit(sbwdog_exit
);
329 MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
330 MODULE_DESCRIPTION("SiByte Watchdog");
332 module_param(timeout
, ulong
, 0);
333 MODULE_PARM_DESC(timeout
,
334 "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
336 MODULE_LICENSE("GPL");
337 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR
);
340 * example code that can be put in a platform code area to utilize the
341 * first watchdog timer for the kernels own purpose.
343 void platform_wd_setup(void)
347 ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
348 "Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
351 "Watchdog IRQ zero(0) failed to be requested - %d\n", ret);