Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[linux/fpc-iii.git] / arch / arm / mach-s3c24xx / mach-rx3715.c
blobb36edce8b2b86ae4e4ec7cc05ee6d87af7e05ace
1 /* linux/arch/arm/mach-s3c2440/mach-rx3715.c
3 * Copyright (c) 2003-2004 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
6 * http://www.handhelds.org/projects/rx3715.html
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 #include <linux/kernel.h>
15 #include <linux/types.h>
16 #include <linux/interrupt.h>
17 #include <linux/list.h>
18 #include <linux/memblock.h>
19 #include <linux/timer.h>
20 #include <linux/init.h>
21 #include <linux/tty.h>
22 #include <linux/console.h>
23 #include <linux/device.h>
24 #include <linux/platform_device.h>
25 #include <linux/serial_core.h>
26 #include <linux/serial.h>
27 #include <linux/io.h>
28 #include <linux/mtd/mtd.h>
29 #include <linux/mtd/nand.h>
30 #include <linux/mtd/nand_ecc.h>
31 #include <linux/mtd/partitions.h>
33 #include <asm/mach/arch.h>
34 #include <asm/mach/irq.h>
35 #include <asm/mach/map.h>
37 #include <linux/platform_data/mtd-nand-s3c2410.h>
39 #include <asm/irq.h>
40 #include <asm/mach-types.h>
42 #include <mach/fb.h>
43 #include <mach/hardware.h>
44 #include <mach/regs-gpio.h>
45 #include <mach/regs-lcd.h>
46 #include <mach/gpio-samsung.h>
48 #include <plat/clock.h>
49 #include <plat/cpu.h>
50 #include <plat/devs.h>
51 #include <plat/pm.h>
52 #include <plat/regs-serial.h>
53 #include <plat/samsung-time.h>
55 #include "common.h"
56 #include "h1940.h"
58 static struct map_desc rx3715_iodesc[] __initdata = {
59 /* dump ISA space somewhere unused */
62 .virtual = (u32)S3C24XX_VA_ISA_WORD,
63 .pfn = __phys_to_pfn(S3C2410_CS3),
64 .length = SZ_1M,
65 .type = MT_DEVICE,
66 }, {
67 .virtual = (u32)S3C24XX_VA_ISA_BYTE,
68 .pfn = __phys_to_pfn(S3C2410_CS3),
69 .length = SZ_1M,
70 .type = MT_DEVICE,
74 static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
75 [0] = {
76 .hwport = 0,
77 .flags = 0,
78 .ucon = 0x3c5,
79 .ulcon = 0x03,
80 .ufcon = 0x51,
81 .clk_sel = S3C2410_UCON_CLKSEL3,
83 [1] = {
84 .hwport = 1,
85 .flags = 0,
86 .ucon = 0x3c5,
87 .ulcon = 0x03,
88 .ufcon = 0x00,
89 .clk_sel = S3C2410_UCON_CLKSEL3,
91 /* IR port */
92 [2] = {
93 .hwport = 2,
94 .uart_flags = UPF_CONS_FLOW,
95 .ucon = 0x3c5,
96 .ulcon = 0x43,
97 .ufcon = 0x51,
98 .clk_sel = S3C2410_UCON_CLKSEL3,
102 /* framebuffer lcd controller information */
104 static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
105 .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
106 S3C2410_LCDCON5_FRM565 |
107 S3C2410_LCDCON5_HWSWP,
109 .type = S3C2410_LCDCON1_TFT,
110 .width = 240,
111 .height = 320,
113 .pixclock = 260000,
114 .xres = 240,
115 .yres = 320,
116 .bpp = 16,
117 .left_margin = 36,
118 .right_margin = 36,
119 .hsync_len = 8,
120 .upper_margin = 6,
121 .lower_margin = 7,
122 .vsync_len = 3,
125 static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
127 .displays = &rx3715_lcdcfg,
128 .num_displays = 1,
129 .default_display = 0,
131 .lpcsel = 0xf82,
133 .gpccon = 0xaa955699,
134 .gpccon_mask = 0xffc003cc,
135 .gpcup = 0x0000ffff,
136 .gpcup_mask = 0xffffffff,
138 .gpdcon = 0xaa95aaa1,
139 .gpdcon_mask = 0xffc0fff0,
140 .gpdup = 0x0000faff,
141 .gpdup_mask = 0xffffffff,
144 static struct mtd_partition __initdata rx3715_nand_part[] = {
145 [0] = {
146 .name = "Whole Flash",
147 .offset = 0,
148 .size = MTDPART_SIZ_FULL,
149 .mask_flags = MTD_WRITEABLE,
153 static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
154 [0] = {
155 .name = "Internal",
156 .nr_chips = 1,
157 .nr_partitions = ARRAY_SIZE(rx3715_nand_part),
158 .partitions = rx3715_nand_part,
162 static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
163 .tacls = 25,
164 .twrph0 = 50,
165 .twrph1 = 15,
166 .nr_sets = ARRAY_SIZE(rx3715_nand_sets),
167 .sets = rx3715_nand_sets,
170 static struct platform_device *rx3715_devices[] __initdata = {
171 &s3c_device_ohci,
172 &s3c_device_lcd,
173 &s3c_device_wdt,
174 &s3c_device_i2c0,
175 &s3c_device_iis,
176 &s3c_device_nand,
179 static void __init rx3715_map_io(void)
181 s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
182 s3c24xx_init_clocks(16934000);
183 s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
184 samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
187 /* H1940 and RX3715 need to reserve this for suspend */
188 static void __init rx3715_reserve(void)
190 memblock_reserve(0x30003000, 0x1000);
191 memblock_reserve(0x30081000, 0x1000);
194 static void __init rx3715_init_machine(void)
196 #ifdef CONFIG_PM_H1940
197 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
198 #endif
199 s3c_pm_init();
201 s3c_nand_set_platdata(&rx3715_nand_info);
202 s3c24xx_fb_set_platdata(&rx3715_fb_info);
203 platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
206 MACHINE_START(RX3715, "IPAQ-RX3715")
207 /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
208 .atag_offset = 0x100,
209 .map_io = rx3715_map_io,
210 .reserve = rx3715_reserve,
211 .init_irq = s3c2440_init_irq,
212 .init_machine = rx3715_init_machine,
213 .init_time = samsung_timer_init,
214 .restart = s3c244x_restart,
215 MACHINE_END