arch/mips/ath79/mach-db120.c

   1 /*
   2  * Atheros DB120 reference board support
   3  *
   4  * Copyright (c) 2011 Qualcomm Atheros
   5  * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
   6  *
   7  * Permission to use, copy, modify, and/or distribute this software for any
   8  * purpose with or without fee is hereby granted, provided that the above
   9  * copyright notice and this permission notice appear in all copies.
  10  *
  11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  18  *
  19  */
  20
  21 #include <linux/pci.h>
  22 #include <linux/ath9k_platform.h>
  23
  24 #include "machtypes.h"
  25 #include "dev-gpio-buttons.h"
  26 #include "dev-leds-gpio.h"
  27 #include "dev-spi.h"
  28 #include "dev-usb.h"
  29 #include "dev-wmac.h"
  30 #include "pci.h"
  31
  32 #define DB120_GPIO_LED_WLAN_5G          12
  33 #define DB120_GPIO_LED_WLAN_2G          13
  34 #define DB120_GPIO_LED_STATUS           14
  35 #define DB120_GPIO_LED_WPS              15
  36
  37 #define DB120_GPIO_BTN_WPS              16
  38
  39 #define DB120_KEYS_POLL_INTERVAL        20      /* msecs */
  40 #define DB120_KEYS_DEBOUNCE_INTERVAL    (3 * DB120_KEYS_POLL_INTERVAL)
  41
  42 #define DB120_WMAC_CALDATA_OFFSET 0x1000
  43 #define DB120_PCIE_CALDATA_OFFSET 0x5000
  44
  45 static struct gpio_led db120_leds_gpio[] __initdata = {
  46         {
  47                 .name           = "db120:green:status",
  48                 .gpio           = DB120_GPIO_LED_STATUS,
  49                 .active_low     = 1,
  50         },
  51         {
  52                 .name           = "db120:green:wps",
  53                 .gpio           = DB120_GPIO_LED_WPS,
  54                 .active_low     = 1,
  55         },
  56         {
  57                 .name           = "db120:green:wlan-5g",
  58                 .gpio           = DB120_GPIO_LED_WLAN_5G,
  59                 .active_low     = 1,
  60         },
  61         {
  62                 .name           = "db120:green:wlan-2g",
  63                 .gpio           = DB120_GPIO_LED_WLAN_2G,
  64                 .active_low     = 1,
  65         },
  66 };
  67
  68 static struct gpio_keys_button db120_gpio_keys[] __initdata = {
  69         {
  70                 .desc           = "WPS button",
  71                 .type           = EV_KEY,
  72                 .code           = KEY_WPS_BUTTON,
  73                 .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
  74                 .gpio           = DB120_GPIO_BTN_WPS,
  75                 .active_low     = 1,
  76         },
  77 };
  78
  79 static struct spi_board_info db120_spi_info[] = {
  80         {
  81                 .bus_num        = 0,
  82                 .chip_select    = 0,
  83                 .max_speed_hz   = 25000000,
  84                 .modalias       = "s25sl064a",
  85         }
  86 };
  87
  88 static struct ath79_spi_platform_data db120_spi_data = {
  89         .bus_num        = 0,
  90         .num_chipselect = 1,
  91 };
  92
  93 #ifdef CONFIG_PCI
  94 static struct ath9k_platform_data db120_ath9k_data;
  95
  96 static int db120_pci_plat_dev_init(struct pci_dev *dev)
  97 {
  98         switch (PCI_SLOT(dev->devfn)) {
  99         case 0:
 100                 dev->dev.platform_data = &db120_ath9k_data;
 101                 break;
 102         }
 103
 104         return 0;
 105 }
 106
 107 static void __init db120_pci_init(u8 *eeprom)
 108 {
 109         memcpy(db120_ath9k_data.eeprom_data, eeprom,
 110                sizeof(db120_ath9k_data.eeprom_data));
 111
 112         ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
 113         ath79_register_pci();
 114 }
 115 #else
 116 static inline void db120_pci_init(void) {}
 117 #endif /* CONFIG_PCI */
 118
 119 static void __init db120_setup(void)
 120 {
 121         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 122
 123         ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
 124                                  db120_leds_gpio);
 125         ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
 126                                         ARRAY_SIZE(db120_gpio_keys),
 127                                         db120_gpio_keys);
 128         ath79_register_spi(&db120_spi_data, db120_spi_info,
 129                            ARRAY_SIZE(db120_spi_info));
 130         ath79_register_usb();
 131         ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
 132         db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
 133 }
 134
 135 MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
 136              db120_setup);