drivers/usb/renesas_usbhs/common.c

   1 /*
   2  * Renesas USB driver
   3  *
   4  * Copyright (C) 2011 Renesas Solutions Corp.
   5  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
   6  *
   7  * This program is distributed in the hope that it will be useful,
   8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
   9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10  * GNU General Public License for more details.
  11  *
  12  * You should have received a copy of the GNU General Public License
  13  * along with this program; if not, write to the Free Software
  14  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  15  *
  16  */
  17 #include <linux/err.h>
  18 #include <linux/io.h>
  19 #include <linux/module.h>
  20 #include <linux/pm_runtime.h>
  21 #include <linux/slab.h>
  22 #include <linux/sysfs.h>
  23 #include "common.h"
  24
  25 /*
  26  *              image of renesas_usbhs
  27  *
  28  * ex) gadget case
  29
  30  * mod.c
  31  * mod_gadget.c
  32  * mod_host.c           pipe.c          fifo.c
  33  *
  34  *                      +-------+       +-----------+
  35  *                      | pipe0 |------>| fifo pio  |
  36  * +------------+       +-------+       +-----------+
  37  * | mod_gadget |=====> | pipe1 |--+
  38  * +------------+       +-------+  |    +-----------+
  39  *                      | pipe2 |  |  +-| fifo dma0 |
  40  * +------------+       +-------+  |  | +-----------+
  41  * | mod_host   |       | pipe3 |<-|--+
  42  * +------------+       +-------+  |    +-----------+
  43  *                      | ....  |  +--->| fifo dma1 |
  44  *                      | ....  |       +-----------+
  45  */
  46
  47
  48 #define USBHSF_RUNTIME_PWCTRL   (1 << 0)
  49
  50 /* status */
  51 #define usbhsc_flags_init(p)   do {(p)->flags = 0; } while (0)
  52 #define usbhsc_flags_set(p, b) ((p)->flags |=  (b))
  53 #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b))
  54 #define usbhsc_flags_has(p, b) ((p)->flags &   (b))
  55
  56 /*
  57  * platform call back
  58  *
  59  * renesas usb support platform callback function.
  60  * Below macro call it.
  61  * if platform doesn't have callback, it return 0 (no error)
  62  */
  63 #define usbhs_platform_call(priv, func, args...)\
  64         (!(priv) ? -ENODEV :                    \
  65          !((priv)->pfunc.func) ? 0 :            \
  66          (priv)->pfunc.func(args))
  67
  68 /*
  69  *              common functions
  70  */
  71 u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
  72 {
  73         return ioread16(priv->base + reg);
  74 }
  75
  76 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
  77 {
  78         iowrite16(data, priv->base + reg);
  79 }
  80
  81 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
  82 {
  83         u16 val = usbhs_read(priv, reg);
  84
  85         val &= ~mask;
  86         val |= data & mask;
  87
  88         usbhs_write(priv, reg, val);
  89 }
  90
  91 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
  92 {
  93         return dev_get_drvdata(&pdev->dev);
  94 }
  95
  96 /*
  97  *              syscfg functions
  98  */
  99 static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
 100 {
 101         usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
 102 }
 103
 104 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
 105 {
 106         u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 107         u16 val  = DCFM | DRPD | HSE | USBE;
 108         int has_otg = usbhs_get_dparam(priv, has_otg);
 109
 110         if (has_otg)
 111                 usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN));
 112
 113         /*
 114          * if enable
 115          *
 116          * - select Host mode
 117          * - D+ Line/D- Line Pull-down
 118          */
 119         usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
 120 }
 121
 122 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
 123 {
 124         u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 125         u16 val  = DPRPU | HSE | USBE;
 126
 127         /*
 128          * if enable
 129          *
 130          * - select Function mode
 131          * - D+ Line Pull-up
 132          */
 133         usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
 134 }
 135
 136 void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
 137 {
 138         usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
 139 }
 140
 141 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
 142 {
 143         usbhs_write(priv, TESTMODE, mode);
 144 }
 145
 146 /*
 147  *              frame functions
 148  */
 149 int usbhs_frame_get_num(struct usbhs_priv *priv)
 150 {
 151         return usbhs_read(priv, FRMNUM) & FRNM_MASK;
 152 }
 153
 154 /*
 155  *              usb request functions
 156  */
 157 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
 158 {
 159         u16 val;
 160
 161         val = usbhs_read(priv, USBREQ);
 162         req->bRequest           = (val >> 8) & 0xFF;
 163         req->bRequestType       = (val >> 0) & 0xFF;
 164
 165         req->wValue     = usbhs_read(priv, USBVAL);
 166         req->wIndex     = usbhs_read(priv, USBINDX);
 167         req->wLength    = usbhs_read(priv, USBLENG);
 168 }
 169
 170 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
 171 {
 172         usbhs_write(priv, USBREQ,  (req->bRequest << 8) | req->bRequestType);
 173         usbhs_write(priv, USBVAL,  req->wValue);
 174         usbhs_write(priv, USBINDX, req->wIndex);
 175         usbhs_write(priv, USBLENG, req->wLength);
 176
 177         usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
 178 }
 179
 180 /*
 181  *              bus/vbus functions
 182  */
 183 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
 184 {
 185         u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
 186
 187         if (status != USBRST) {
 188                 struct device *dev = usbhs_priv_to_dev(priv);
 189                 dev_err(dev, "usbhs should be reset\n");
 190         }
 191
 192         usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
 193 }
 194
 195 void usbhs_bus_send_reset(struct usbhs_priv *priv)
 196 {
 197         usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
 198 }
 199
 200 int usbhs_bus_get_speed(struct usbhs_priv *priv)
 201 {
 202         u16 dvstctr = usbhs_read(priv, DVSTCTR);
 203
 204         switch (RHST & dvstctr) {
 205         case RHST_LOW_SPEED:
 206                 return USB_SPEED_LOW;
 207         case RHST_FULL_SPEED:
 208                 return USB_SPEED_FULL;
 209         case RHST_HIGH_SPEED:
 210                 return USB_SPEED_HIGH;
 211         }
 212
 213         return USB_SPEED_UNKNOWN;
 214 }
 215
 216 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
 217 {
 218         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 219
 220         return usbhs_platform_call(priv, set_vbus, pdev, enable);
 221 }
 222
 223 static void usbhsc_bus_init(struct usbhs_priv *priv)
 224 {
 225         usbhs_write(priv, DVSTCTR, 0);
 226
 227         usbhs_vbus_ctrl(priv, 0);
 228 }
 229
 230 /*
 231  *              device configuration
 232  */
 233 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
 234                            u16 upphub, u16 hubport, u16 speed)
 235 {
 236         struct device *dev = usbhs_priv_to_dev(priv);
 237         u16 usbspd = 0;
 238         u32 reg = DEVADD0 + (2 * devnum);
 239
 240         if (devnum > 10) {
 241                 dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
 242                 return -EIO;
 243         }
 244
 245         if (upphub > 0xA) {
 246                 dev_err(dev, "unsupported hub number %d\n", upphub);
 247                 return -EIO;
 248         }
 249
 250         switch (speed) {
 251         case USB_SPEED_LOW:
 252                 usbspd = USBSPD_SPEED_LOW;
 253                 break;
 254         case USB_SPEED_FULL:
 255                 usbspd = USBSPD_SPEED_FULL;
 256                 break;
 257         case USB_SPEED_HIGH:
 258                 usbspd = USBSPD_SPEED_HIGH;
 259                 break;
 260         default:
 261                 dev_err(dev, "unsupported speed %d\n", speed);
 262                 return -EIO;
 263         }
 264
 265         usbhs_write(priv, reg,  UPPHUB(upphub)  |
 266                                 HUBPORT(hubport)|
 267                                 USBSPD(usbspd));
 268
 269         return 0;
 270 }
 271
 272 /*
 273  *              local functions
 274  */
 275 static void usbhsc_set_buswait(struct usbhs_priv *priv)
 276 {
 277         int wait = usbhs_get_dparam(priv, buswait_bwait);
 278
 279         /* set bus wait if platform have */
 280         if (wait)
 281                 usbhs_bset(priv, BUSWAIT, 0x000F, wait);
 282 }
 283
 284 /*
 285  *              platform default param
 286  */
 287 static u32 usbhsc_default_pipe_type[] = {
 288                 USB_ENDPOINT_XFER_CONTROL,
 289                 USB_ENDPOINT_XFER_ISOC,
 290                 USB_ENDPOINT_XFER_ISOC,
 291                 USB_ENDPOINT_XFER_BULK,
 292                 USB_ENDPOINT_XFER_BULK,
 293                 USB_ENDPOINT_XFER_BULK,
 294                 USB_ENDPOINT_XFER_INT,
 295                 USB_ENDPOINT_XFER_INT,
 296                 USB_ENDPOINT_XFER_INT,
 297                 USB_ENDPOINT_XFER_INT,
 298 };
 299
 300 /*
 301  *              power control
 302  */
 303 static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
 304 {
 305         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 306         struct device *dev = usbhs_priv_to_dev(priv);
 307
 308         if (enable) {
 309                 /* enable PM */
 310                 pm_runtime_get_sync(dev);
 311
 312                 /* enable platform power */
 313                 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
 314
 315                 /* USB on */
 316                 usbhs_sys_clock_ctrl(priv, enable);
 317         } else {
 318                 /* USB off */
 319                 usbhs_sys_clock_ctrl(priv, enable);
 320
 321                 /* disable platform power */
 322                 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
 323
 324                 /* disable PM */
 325                 pm_runtime_put_sync(dev);
 326         }
 327 }
 328
 329 /*
 330  *              hotplug
 331  */
 332 static void usbhsc_hotplug(struct usbhs_priv *priv)
 333 {
 334         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 335         struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 336         int id;
 337         int enable;
 338         int ret;
 339
 340         /*
 341          * get vbus status from platform
 342          */
 343         enable = usbhs_platform_call(priv, get_vbus, pdev);
 344
 345         /*
 346          * get id from platform
 347          */
 348         id = usbhs_platform_call(priv, get_id, pdev);
 349
 350         if (enable && !mod) {
 351                 ret = usbhs_mod_change(priv, id);
 352                 if (ret < 0)
 353                         return;
 354
 355                 dev_dbg(&pdev->dev, "%s enable\n", __func__);
 356
 357                 /* power on */
 358                 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 359                         usbhsc_power_ctrl(priv, enable);
 360
 361                 /* bus init */
 362                 usbhsc_set_buswait(priv);
 363                 usbhsc_bus_init(priv);
 364
 365                 /* module start */
 366                 usbhs_mod_call(priv, start, priv);
 367
 368         } else if (!enable && mod) {
 369                 dev_dbg(&pdev->dev, "%s disable\n", __func__);
 370
 371                 /* module stop */
 372                 usbhs_mod_call(priv, stop, priv);
 373
 374                 /* bus init */
 375                 usbhsc_bus_init(priv);
 376
 377                 /* power off */
 378                 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 379                         usbhsc_power_ctrl(priv, enable);
 380
 381                 usbhs_mod_change(priv, -1);
 382
 383                 /* reset phy for next connection */
 384                 usbhs_platform_call(priv, phy_reset, pdev);
 385         }
 386 }
 387
 388 /*
 389  *              notify hotplug
 390  */
 391 static void usbhsc_notify_hotplug(struct work_struct *work)
 392 {
 393         struct usbhs_priv *priv = container_of(work,
 394                                                struct usbhs_priv,
 395                                                notify_hotplug_work.work);
 396         usbhsc_hotplug(priv);
 397 }
 398
 399 static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
 400 {
 401         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 402         int delay = usbhs_get_dparam(priv, detection_delay);
 403
 404         /*
 405          * This functions will be called in interrupt.
 406          * To make sure safety context,
 407          * use workqueue for usbhs_notify_hotplug
 408          */
 409         schedule_delayed_work(&priv->notify_hotplug_work,
 410                               msecs_to_jiffies(delay));
 411         return 0;
 412 }
 413
 414 /*
 415  *              platform functions
 416  */
 417 static int usbhs_probe(struct platform_device *pdev)
 418 {
 419         struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
 420         struct renesas_usbhs_driver_callback *dfunc;
 421         struct usbhs_priv *priv;
 422         struct resource *res, *irq_res;
 423         int ret;
 424
 425         /* check platform information */
 426         if (!info ||
 427             !info->platform_callback.get_id) {
 428                 dev_err(&pdev->dev, "no platform information\n");
 429                 return -EINVAL;
 430         }
 431
 432         /* platform data */
 433         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 434         irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 435         if (!res || !irq_res) {
 436                 dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
 437                 return -ENODEV;
 438         }
 439
 440         /* usb private data */
 441         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 442         if (!priv) {
 443                 dev_err(&pdev->dev, "Could not allocate priv\n");
 444                 return -ENOMEM;
 445         }
 446
 447         priv->base = devm_ioremap_resource(&pdev->dev, res);
 448         if (IS_ERR(priv->base))
 449                 return PTR_ERR(priv->base);
 450
 451         /*
 452          * care platform info
 453          */
 454         memcpy(&priv->pfunc,
 455                &info->platform_callback,
 456                sizeof(struct renesas_usbhs_platform_callback));
 457         memcpy(&priv->dparam,
 458                &info->driver_param,
 459                sizeof(struct renesas_usbhs_driver_param));
 460
 461         /* set driver callback functions for platform */
 462         dfunc                   = &info->driver_callback;
 463         dfunc->notify_hotplug   = usbhsc_drvcllbck_notify_hotplug;
 464
 465         /* set default param if platform doesn't have */
 466         if (!priv->dparam.pipe_type) {
 467                 priv->dparam.pipe_type = usbhsc_default_pipe_type;
 468                 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
 469         }
 470         if (!priv->dparam.pio_dma_border)
 471                 priv->dparam.pio_dma_border = 64; /* 64byte */
 472
 473         /* FIXME */
 474         /* runtime power control ? */
 475         if (priv->pfunc.get_vbus)
 476                 usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
 477
 478         /*
 479          * priv settings
 480          */
 481         priv->irq       = irq_res->start;
 482         if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
 483                 priv->irqflags = IRQF_SHARED;
 484         priv->pdev      = pdev;
 485         INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
 486         spin_lock_init(usbhs_priv_to_lock(priv));
 487
 488         /* call pipe and module init */
 489         ret = usbhs_pipe_probe(priv);
 490         if (ret < 0)
 491                 return ret;
 492
 493         ret = usbhs_fifo_probe(priv);
 494         if (ret < 0)
 495                 goto probe_end_pipe_exit;
 496
 497         ret = usbhs_mod_probe(priv);
 498         if (ret < 0)
 499                 goto probe_end_fifo_exit;
 500
 501         /* dev_set_drvdata should be called after usbhs_mod_init */
 502         platform_set_drvdata(pdev, priv);
 503
 504         /*
 505          * deviece reset here because
 506          * USB device might be used in boot loader.
 507          */
 508         usbhs_sys_clock_ctrl(priv, 0);
 509
 510         /*
 511          * platform call
 512          *
 513          * USB phy setup might depend on CPU/Board.
 514          * If platform has its callback functions,
 515          * call it here.
 516          */
 517         ret = usbhs_platform_call(priv, hardware_init, pdev);
 518         if (ret < 0) {
 519                 dev_err(&pdev->dev, "platform prove failed.\n");
 520                 goto probe_end_mod_exit;
 521         }
 522
 523         /* reset phy for connection */
 524         usbhs_platform_call(priv, phy_reset, pdev);
 525
 526         /* power control */
 527         pm_runtime_enable(&pdev->dev);
 528         if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
 529                 usbhsc_power_ctrl(priv, 1);
 530                 usbhs_mod_autonomy_mode(priv);
 531         }
 532
 533         /*
 534          * manual call notify_hotplug for cold plug
 535          */
 536         ret = usbhsc_drvcllbck_notify_hotplug(pdev);
 537         if (ret < 0)
 538                 goto probe_end_call_remove;
 539
 540         dev_info(&pdev->dev, "probed\n");
 541
 542         return ret;
 543
 544 probe_end_call_remove:
 545         usbhs_platform_call(priv, hardware_exit, pdev);
 546 probe_end_mod_exit:
 547         usbhs_mod_remove(priv);
 548 probe_end_fifo_exit:
 549         usbhs_fifo_remove(priv);
 550 probe_end_pipe_exit:
 551         usbhs_pipe_remove(priv);
 552
 553         dev_info(&pdev->dev, "probe failed\n");
 554
 555         return ret;
 556 }
 557
 558 static int usbhs_remove(struct platform_device *pdev)
 559 {
 560         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 561         struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
 562         struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback;
 563
 564         dev_dbg(&pdev->dev, "usb remove\n");
 565
 566         dfunc->notify_hotplug = NULL;
 567
 568         /* power off */
 569         if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 570                 usbhsc_power_ctrl(priv, 0);
 571
 572         pm_runtime_disable(&pdev->dev);
 573
 574         usbhs_platform_call(priv, hardware_exit, pdev);
 575         usbhs_mod_remove(priv);
 576         usbhs_fifo_remove(priv);
 577         usbhs_pipe_remove(priv);
 578
 579         return 0;
 580 }
 581
 582 static int usbhsc_suspend(struct device *dev)
 583 {
 584         struct usbhs_priv *priv = dev_get_drvdata(dev);
 585         struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 586
 587         if (mod) {
 588                 usbhs_mod_call(priv, stop, priv);
 589                 usbhs_mod_change(priv, -1);
 590         }
 591
 592         if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 593                 usbhsc_power_ctrl(priv, 0);
 594
 595         return 0;
 596 }
 597
 598 static int usbhsc_resume(struct device *dev)
 599 {
 600         struct usbhs_priv *priv = dev_get_drvdata(dev);
 601         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 602
 603         if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 604                 usbhsc_power_ctrl(priv, 1);
 605
 606         usbhs_platform_call(priv, phy_reset, pdev);
 607
 608         usbhsc_drvcllbck_notify_hotplug(pdev);
 609
 610         return 0;
 611 }
 612
 613 static int usbhsc_runtime_nop(struct device *dev)
 614 {
 615         /* Runtime PM callback shared between ->runtime_suspend()
 616          * and ->runtime_resume(). Simply returns success.
 617          *
 618          * This driver re-initializes all registers after
 619          * pm_runtime_get_sync() anyway so there is no need
 620          * to save and restore registers here.
 621          */
 622         return 0;
 623 }
 624
 625 static const struct dev_pm_ops usbhsc_pm_ops = {
 626         .suspend                = usbhsc_suspend,
 627         .resume                 = usbhsc_resume,
 628         .runtime_suspend        = usbhsc_runtime_nop,
 629         .runtime_resume         = usbhsc_runtime_nop,
 630 };
 631
 632 static struct platform_driver renesas_usbhs_driver = {
 633         .driver         = {
 634                 .name   = "renesas_usbhs",
 635                 .pm     = &usbhsc_pm_ops,
 636         },
 637         .probe          = usbhs_probe,
 638         .remove         = usbhs_remove,
 639 };
 640
 641 module_platform_driver(renesas_usbhs_driver);
 642
 643 MODULE_LICENSE("GPL");
 644 MODULE_DESCRIPTION("Renesas USB driver");
 645 MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");