drivers/staging/bcm/Ioctl.h

   1 #ifndef _IOCTL_H_
   2 #define _IOCTL_H_
   3
   4 struct bcm_rdm_buffer {
   5         unsigned long Register;
   6         unsigned long Length;
   7 } __packed;
   8
   9 struct bcm_wrm_buffer {
  10         unsigned long Register;
  11         unsigned long Length;
  12         unsigned char Data[4];
  13 } __packed;
  14
  15 struct bcm_ioctl_buffer {
  16         void __user *InputBuffer;
  17         unsigned long InputLength;
  18         void __user *OutputBuffer;
  19         unsigned long OutputLength;
  20 } __packed;
  21
  22 struct bcm_gpio_info {
  23         unsigned int uiGpioNumber; /* valid numbers 0-15 */
  24         unsigned int uiGpioValue; /* 1 set ; 0 not  set */
  25 } __packed;
  26
  27 struct bcm_user_thread_req {
  28         /* 0->Inactivate LED thread. */
  29         /* 1->Activate the LED thread */
  30         unsigned int ThreadState;
  31 } __packed;
  32
  33 #define LED_THREAD_ACTIVATION_REQ  1
  34 #define BCM_IOCTL                               'k'
  35 #define IOCTL_SEND_CONTROL_MESSAGE              _IOW(BCM_IOCTL, 0x801, int)
  36 #define IOCTL_BCM_REGISTER_WRITE                _IOW(BCM_IOCTL, 0x802, int)
  37 #define IOCTL_BCM_REGISTER_READ                 _IOR(BCM_IOCTL, 0x803, int)
  38 #define IOCTL_BCM_COMMON_MEMORY_WRITE           _IOW(BCM_IOCTL, 0x804, int)
  39 #define IOCTL_BCM_COMMON_MEMORY_READ            _IOR(BCM_IOCTL, 0x805, int)
  40 #define IOCTL_GET_CONTROL_MESSAGE               _IOR(BCM_IOCTL, 0x806, int)
  41 #define IOCTL_BCM_FIRMWARE_DOWNLOAD             _IOW(BCM_IOCTL, 0x807, int)
  42 #define IOCTL_BCM_SET_SEND_VCID                 _IOW(BCM_IOCTL, 0x808, int)
  43 #define IOCTL_BCM_SWITCH_TRANSFER_MODE          _IOW(BCM_IOCTL, 0x809, int)
  44 #define IOCTL_LINK_REQ                          _IOW(BCM_IOCTL, 0x80A, int)
  45 #define IOCTL_RSSI_LEVEL_REQ                    _IOW(BCM_IOCTL, 0x80B, int)
  46 #define IOCTL_IDLE_REQ                          _IOW(BCM_IOCTL, 0x80C, int)
  47 #define IOCTL_SS_INFO_REQ                       _IOW(BCM_IOCTL, 0x80D, int)
  48 #define IOCTL_GET_STATISTICS_POINTER            _IOW(BCM_IOCTL, 0x80E, int)
  49 #define IOCTL_CM_REQUEST                        _IOW(BCM_IOCTL, 0x80F, int)
  50 #define IOCTL_INIT_PARAM_REQ                    _IOW(BCM_IOCTL, 0x810, int)
  51 #define IOCTL_MAC_ADDR_REQ                      _IOW(BCM_IOCTL, 0x811, int)
  52 #define IOCTL_MAC_ADDR_RESP                     _IOWR(BCM_IOCTL, 0x812, int)
  53 #define IOCTL_CLASSIFICATION_RULE               _IOW(BCM_IOCTL, 0x813, char)
  54 #define IOCTL_CLOSE_NOTIFICATION                _IO(BCM_IOCTL, 0x814)
  55 #define IOCTL_LINK_UP                           _IO(BCM_IOCTL, 0x815)
  56 #define IOCTL_LINK_DOWN                         _IO(BCM_IOCTL, 0x816, struct bcm_ioctl_buffer)
  57 #define IOCTL_CHIP_RESET                        _IO(BCM_IOCTL, 0x816)
  58 #define IOCTL_CINR_LEVEL_REQ                    _IOW(BCM_IOCTL, 0x817, char)
  59 #define IOCTL_WTM_CONTROL_REQ                   _IOW(BCM_IOCTL, 0x817, char)
  60 #define IOCTL_BE_BUCKET_SIZE                    _IOW(BCM_IOCTL, 0x818, unsigned long)
  61 #define IOCTL_RTPS_BUCKET_SIZE                  _IOW(BCM_IOCTL, 0x819, unsigned long)
  62 #define IOCTL_QOS_THRESHOLD                     _IOW(BCM_IOCTL, 0x820, unsigned long)
  63 #define IOCTL_DUMP_PACKET_INFO                  _IO(BCM_IOCTL, 0x821)
  64 #define IOCTL_GET_PACK_INFO                     _IOR(BCM_IOCTL, 0x823, int)
  65 #define IOCTL_BCM_GET_DRIVER_VERSION            _IOR(BCM_IOCTL, 0x829, int)
  66 #define IOCTL_BCM_GET_CURRENT_STATUS            _IOW(BCM_IOCTL, 0x828, int)
  67 #define IOCTL_BCM_GPIO_SET_REQUEST              _IOW(BCM_IOCTL, 0x82A, int)
  68 #define IOCTL_BCM_GPIO_STATUS_REQUEST           _IOW(BCM_IOCTL, 0x82b, int)
  69 #define IOCTL_BCM_GET_DSX_INDICATION            _IOR(BCM_IOCTL, 0x854, int)
  70 #define IOCTL_BCM_BUFFER_DOWNLOAD_START         _IOW(BCM_IOCTL, 0x855, int)
  71 #define IOCTL_BCM_BUFFER_DOWNLOAD               _IOW(BCM_IOCTL, 0x856, int)
  72 #define IOCTL_BCM_BUFFER_DOWNLOAD_STOP          _IOW(BCM_IOCTL, 0x857, int)
  73 #define IOCTL_BCM_REGISTER_WRITE_PRIVATE        _IOW(BCM_IOCTL, 0x826, char)
  74 #define IOCTL_BCM_REGISTER_READ_PRIVATE         _IOW(BCM_IOCTL, 0x827, char)
  75 #define IOCTL_BCM_SET_DEBUG                     _IOW(BCM_IOCTL, 0x824, struct bcm_ioctl_buffer)
  76 #define IOCTL_BCM_EEPROM_REGISTER_WRITE         _IOW(BCM_IOCTL, 0x858, int)
  77 #define IOCTL_BCM_EEPROM_REGISTER_READ          _IOR(BCM_IOCTL, 0x859, int)
  78 #define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE      _IOR(BCM_IOCTL, 0x860, int)
  79 #define IOCTL_BCM_SET_MAC_TRACING               _IOW(BCM_IOCTL, 0x82c, int)
  80 #define IOCTL_BCM_GET_HOST_MIBS                 _IOW(BCM_IOCTL, 0x853, int)
  81 #define IOCTL_BCM_NVM_READ                      _IOR(BCM_IOCTL, 0x861, int)
  82 #define IOCTL_BCM_NVM_WRITE                     _IOW(BCM_IOCTL, 0x862, int)
  83 #define IOCTL_BCM_GET_NVM_SIZE                  _IOR(BCM_IOCTL, 0x863, int)
  84 #define IOCTL_BCM_CAL_INIT                      _IOR(BCM_IOCTL, 0x864, int)
  85 #define IOCTL_BCM_BULK_WRM                      _IOW(BCM_IOCTL, 0x90B, int)
  86 #define IOCTL_BCM_FLASH2X_SECTION_READ          _IOR(BCM_IOCTL, 0x865, int)
  87 #define IOCTL_BCM_FLASH2X_SECTION_WRITE         _IOW(BCM_IOCTL, 0x866, int)
  88 #define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP    _IOR(BCM_IOCTL, 0x867, int)
  89 #define IOCTL_BCM_SET_ACTIVE_SECTION            _IOW(BCM_IOCTL, 0x868, int)
  90 #define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION       _IO(BCM_IOCTL, 0x869)
  91 #define IOCTL_BCM_COPY_SECTION                  _IOW(BCM_IOCTL, 0x870, int)
  92 #define IOCTL_BCM_GET_FLASH_CS_INFO             _IOR(BCM_IOCTL, 0x871, int)
  93 #define IOCTL_BCM_SELECT_DSD                    _IOW(BCM_IOCTL, 0x872, int)
  94 #define IOCTL_BCM_NVM_RAW_READ                  _IOR(BCM_IOCTL, 0x875, int)
  95 #define IOCTL_BCM_CNTRLMSG_MASK                 _IOW(BCM_IOCTL, 0x874, int)
  96 #define IOCTL_BCM_GET_DEVICE_DRIVER_INFO        _IOR(BCM_IOCTL, 0x877, int)
  97 #define IOCTL_BCM_TIME_SINCE_NET_ENTRY          _IOR(BCM_IOCTL, 0x876, int)
  98 #define BCM_LED_THREAD_STATE_CHANGE_REQ         _IOW(BCM_IOCTL, 0x878, int)
  99 #define IOCTL_BCM_GPIO_MULTI_REQUEST            _IOW(BCM_IOCTL, 0x82D, struct bcm_ioctl_buffer)
 100 #define IOCTL_BCM_GPIO_MODE_REQUEST             _IOW(BCM_IOCTL, 0x82E, struct bcm_ioctl_buffer)
 101
 102 enum bcm_interface_type {
 103         BCM_MII,
 104         BCM_CARDBUS,
 105         BCM_USB,
 106         BCM_SDIO,
 107         BCM_PCMCIA
 108 };
 109
 110 struct bcm_driver_info {
 111         enum bcm_nvm_type       u32NVMType;
 112         unsigned int            MaxRDMBufferSize;
 113         enum bcm_interface_type u32InterfaceType;
 114         unsigned int            u32DSDStartOffset;
 115         unsigned int            u32RxAlignmentCorrection;
 116         unsigned int            u32Reserved[10];
 117 };
 118
 119 struct bcm_nvm_readwrite {
 120         void __user *pBuffer;
 121         uint32_t  uiOffset;
 122         uint32_t uiNumBytes;
 123         bool bVerify;
 124 };
 125
 126 struct bcm_bulk_wrm_buffer {
 127         unsigned long Register;
 128         unsigned long SwapEndian;
 129         unsigned long Values[1];
 130 };
 131
 132 enum bcm_flash2x_section_val {
 133         NO_SECTION_VAL = 0, /* no section chosen when absolute offset is given for RD/WR */
 134         ISO_IMAGE1,
 135         ISO_IMAGE2,
 136         DSD0,
 137         DSD1,
 138         DSD2,
 139         VSA0,
 140         VSA1,
 141         VSA2,
 142         SCSI,
 143         CONTROL_SECTION,
 144         ISO_IMAGE1_PART2,
 145         ISO_IMAGE1_PART3,
 146         ISO_IMAGE2_PART2,
 147         ISO_IMAGE2_PART3,
 148         TOTAL_SECTIONS
 149 };
 150
 151 /*
 152  * Structure used for READ/WRITE Flash Map2.x
 153  */
 154 struct bcm_flash2x_readwrite {
 155         enum bcm_flash2x_section_val Section; /* section to be read/written */
 156         u32 offset; /* offset within section. */
 157         u32 numOfBytes; /* number of bytes from the offset */
 158         u32 bVerify;
 159         void __user *pDataBuff; /* buffer for reading/writing */
 160 };
 161
 162 /*
 163  * This structure is used for coping one section to other.
 164  * there are two ways to copy one section to other.
 165  * it NOB =0, complete section will be copied on to other.
 166  * if NOB !=0, only NOB will be copied from the given offset.
 167  */
 168
 169 struct bcm_flash2x_copy_section {
 170         enum bcm_flash2x_section_val SrcSection;
 171         enum bcm_flash2x_section_val DstSection;
 172         u32 offset;
 173         u32 numOfBytes;
 174 };
 175
 176 /*
 177  * This section provide the complete bitmap of the Flash.
 178  * using this map lib/APP will issue read/write command.
 179  * Fields are defined as :
 180  * Bit [0] = section is present  //1:present, 0: Not present
 181  * Bit [1] = section is valid  //1: valid, 0: not valid
 182  * Bit [2] = Section is R/W  //0: RW, 1: RO
 183  * Bit [3] = Section is Active or not 1 means Active, 0->inactive
 184  * Bit [7...3] = Reserved
 185  */
 186
 187 struct bcm_flash2x_bitmap {
 188         unsigned char ISO_IMAGE1;
 189         unsigned char ISO_IMAGE2;
 190         unsigned char DSD0;
 191         unsigned char DSD1;
 192         unsigned char DSD2;
 193         unsigned char VSA0;
 194         unsigned char VSA1;
 195         unsigned char VSA2;
 196         unsigned char SCSI;
 197         unsigned char CONTROL_SECTION;
 198         /* Reserved for future use */
 199         unsigned char Reserved0;
 200         unsigned char Reserved1;
 201         unsigned char Reserved2;
 202 };
 203
 204 struct bcm_time_elapsed {
 205         u64 ul64TimeElapsedSinceNetEntry;
 206         u32 uiReserved[4];
 207 };
 208
 209 enum {
 210         WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
 211         HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
 212         MAX_IDX
 213 };
 214
 215 struct bcm_gpio_multi_info {
 216         unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
 217         unsigned int uiGPIOMask; /* set the corresponding bit to 1 to access GPIO */
 218         unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
 219 } __packed;
 220
 221 struct bcm_gpio_multi_mode {
 222         unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
 223         unsigned int uiGPIOMask; /* GPIO mask to set mode */
 224 } __packed;
 225
 226 #endif