2 * linux/drivers/message/fusion/mptspi.c
3 * For use with LSI PCI chip/adapter(s)
4 * running LSI Fusion MPT (Message Passing Technology) firmware.
6 * Copyright (c) 1999-2008 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; version 2 of the License.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26 solely responsible for determining the appropriateness of using and
27 distributing the Program and assumes all risks associated with its
28 exercise of rights under this Agreement, including but not limited to
29 the risks and costs of program errors, damage to or loss of data,
30 programs or equipment, and unavailability or interruption of operations.
32 DISCLAIMER OF LIABILITY
33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
41 You should have received a copy of the GNU General Public License
42 along with this program; if not, write to the Free Software
43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/slab.h>
50 #include <linux/init.h>
51 #include <linux/errno.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h> /* for mdelay */
55 #include <linux/interrupt.h> /* needed for in_interrupt() proto */
56 #include <linux/reboot.h> /* notifier code */
57 #include <linux/workqueue.h>
58 #include <linux/raid_class.h>
60 #include <scsi/scsi.h>
61 #include <scsi/scsi_cmnd.h>
62 #include <scsi/scsi_device.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_tcq.h>
65 #include <scsi/scsi_transport.h>
66 #include <scsi/scsi_transport_spi.h>
67 #include <scsi/scsi_dbg.h>
72 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
73 #define my_NAME "Fusion MPT SPI Host driver"
74 #define my_VERSION MPT_LINUX_VERSION_COMMON
75 #define MYNAM "mptspi"
77 MODULE_AUTHOR(MODULEAUTHOR
);
78 MODULE_DESCRIPTION(my_NAME
);
79 MODULE_LICENSE("GPL");
80 MODULE_VERSION(my_VERSION
);
82 /* Command line args */
83 static int mpt_saf_te
= MPTSCSIH_SAF_TE
;
84 module_param(mpt_saf_te
, int, 0);
85 MODULE_PARM_DESC(mpt_saf_te
, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)");
87 static void mptspi_write_offset(struct scsi_target
*, int);
88 static void mptspi_write_width(struct scsi_target
*, int);
89 static int mptspi_write_spi_device_pg1(struct scsi_target
*,
90 struct _CONFIG_PAGE_SCSI_DEVICE_1
*);
92 static struct scsi_transport_template
*mptspi_transport_template
= NULL
;
94 static u8 mptspiDoneCtx
= MPT_MAX_PROTOCOL_DRIVERS
;
95 static u8 mptspiTaskCtx
= MPT_MAX_PROTOCOL_DRIVERS
;
96 static u8 mptspiInternalCtx
= MPT_MAX_PROTOCOL_DRIVERS
; /* Used only for internal commands */
99 * mptspi_setTargetNegoParms - Update the target negotiation parameters
100 * @hd: Pointer to a SCSI Host Structure
101 * @target: per target private data
104 * Update the target negotiation parameters based on the the Inquiry
105 * data, adapter capabilities, and NVRAM settings.
108 mptspi_setTargetNegoParms(MPT_SCSI_HOST
*hd
, VirtTarget
*target
,
109 struct scsi_device
*sdev
)
111 MPT_ADAPTER
*ioc
= hd
->ioc
;
112 SpiCfgData
*pspi_data
= &ioc
->spi_data
;
113 int id
= (int) target
->id
;
115 u8 width
= MPT_NARROW
;
116 u8 factor
= MPT_ASYNC
;
121 target
->negoFlags
= pspi_data
->noQas
;
123 if (sdev
->scsi_level
< SCSI_2
) {
126 offset
= pspi_data
->maxSyncOffset
;
127 target
->tflags
&= ~MPT_TARGET_FLAGS_Q_YES
;
129 if (scsi_device_wide(sdev
))
132 if (scsi_device_sync(sdev
)) {
133 factor
= pspi_data
->minSyncFactor
;
134 if (!scsi_device_dt(sdev
))
137 if (!scsi_device_ius(sdev
) &&
138 !scsi_device_qas(sdev
))
139 factor
= MPT_ULTRA160
;
141 factor
= MPT_ULTRA320
;
142 if (scsi_device_qas(sdev
)) {
144 printk(MYIOC_s_DEBUG_FMT
"Enabling QAS due to "
145 "byte56=%02x on id=%d!\n", ioc
->name
,
146 scsi_device_qas(sdev
), id
));
149 if (sdev
->type
== TYPE_TAPE
&&
150 scsi_device_ius(sdev
))
151 target
->negoFlags
|= MPT_TAPE_NEGO_IDP
;
154 offset
= pspi_data
->maxSyncOffset
;
156 /* If RAID, never disable QAS
157 * else if non RAID, do not disable
158 * QAS if bit 1 is set
159 * bit 1 QAS support, non-raid only
162 if (target
->raidVolume
== 1)
170 if (!sdev
->tagged_supported
)
171 target
->tflags
&= ~MPT_TARGET_FLAGS_Q_YES
;
173 /* Update tflags based on NVRAM settings. (SCSI only)
175 if (pspi_data
->nvram
&& (pspi_data
->nvram
[id
] != MPT_HOST_NVRAM_INVALID
)) {
176 nvram
= pspi_data
->nvram
[id
];
177 nfactor
= (nvram
& MPT_NVRAM_SYNC_MASK
) >> 8;
180 width
= nvram
& MPT_NVRAM_WIDE_DISABLE
? 0 : 1;
183 /* Ensure factor is set to the
184 * maximum of: adapter, nvram, inquiry
187 if (nfactor
< pspi_data
->minSyncFactor
)
188 nfactor
= pspi_data
->minSyncFactor
;
190 factor
= max(factor
, nfactor
);
191 if (factor
== MPT_ASYNC
)
202 /* Make sure data is consistent
204 if ((!width
) && (factor
< MPT_ULTRA2
))
207 /* Save the data to the target structure.
209 target
->minSyncFactor
= factor
;
210 target
->maxOffset
= offset
;
211 target
->maxWidth
= width
;
213 spi_min_period(scsi_target(sdev
)) = factor
;
214 spi_max_offset(scsi_target(sdev
)) = offset
;
215 spi_max_width(scsi_target(sdev
)) = width
;
217 target
->tflags
|= MPT_TARGET_FLAGS_VALID_NEGO
;
219 /* Disable unused features.
222 target
->negoFlags
|= MPT_TARGET_NO_NEGO_WIDE
;
225 target
->negoFlags
|= MPT_TARGET_NO_NEGO_SYNC
;
227 if ( factor
> MPT_ULTRA320
)
230 if (noQas
&& (pspi_data
->noQas
== 0)) {
231 pspi_data
->noQas
|= MPT_TARGET_NO_NEGO_QAS
;
232 target
->negoFlags
|= MPT_TARGET_NO_NEGO_QAS
;
234 /* Disable QAS in a mixed configuration case
237 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
238 "Disabling QAS due to noQas=%02x on id=%d!\n", ioc
->name
, noQas
, id
));
243 * mptspi_writeIOCPage4 - write IOC Page 4
244 * @hd: Pointer to a SCSI Host Structure
245 * @channel: channel number
246 * @id: write IOC Page4 for this ID & Bus
248 * Return: -EAGAIN if unable to obtain a Message Frame
251 * Remark: We do not wait for a return, write pages sequentially.
254 mptspi_writeIOCPage4(MPT_SCSI_HOST
*hd
, u8 channel
, u8 id
)
256 MPT_ADAPTER
*ioc
= hd
->ioc
;
258 IOCPage4_t
*IOCPage4Ptr
;
266 /* Get a MF for this command.
268 if ((mf
= mpt_get_msg_frame(ioc
->DoneCtx
, ioc
)) == NULL
) {
269 dfailprintk(ioc
, printk(MYIOC_s_WARN_FMT
270 "writeIOCPage4 : no msg frames!\n",ioc
->name
));
274 /* Set the request and the data pointers.
275 * Place data at end of MF.
277 pReq
= (Config_t
*)mf
;
279 req_idx
= le16_to_cpu(mf
->u
.frame
.hwhdr
.msgctxu
.fld
.req_idx
);
280 frameOffset
= ioc
->req_sz
- sizeof(IOCPage4_t
);
282 /* Complete the request frame (same for all requests).
284 pReq
->Action
= MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT
;
286 pReq
->ChainOffset
= 0;
287 pReq
->Function
= MPI_FUNCTION_CONFIG
;
288 pReq
->ExtPageLength
= 0;
289 pReq
->ExtPageType
= 0;
291 for (ii
=0; ii
< 8; ii
++) {
292 pReq
->Reserved2
[ii
] = 0;
295 IOCPage4Ptr
= ioc
->spi_data
.pIocPg4
;
296 dataDma
= ioc
->spi_data
.IocPg4_dma
;
297 ii
= IOCPage4Ptr
->ActiveSEP
++;
298 IOCPage4Ptr
->SEP
[ii
].SEPTargetID
= id
;
299 IOCPage4Ptr
->SEP
[ii
].SEPBus
= channel
;
300 pReq
->Header
= IOCPage4Ptr
->Header
;
301 pReq
->PageAddress
= cpu_to_le32(id
| (channel
<< 8 ));
303 /* Add a SGE to the config request.
305 flagsLength
= MPT_SGE_FLAGS_SSIMPLE_WRITE
|
306 (IOCPage4Ptr
->Header
.PageLength
+ ii
) * 4;
308 ioc
->add_sge((char *)&pReq
->PageBufferSGE
, flagsLength
, dataDma
);
310 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
311 "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
312 ioc
->name
, IOCPage4Ptr
->MaxSEP
, IOCPage4Ptr
->ActiveSEP
, id
, channel
));
314 mpt_put_msg_frame(ioc
->DoneCtx
, ioc
, mf
);
320 * mptspi_initTarget - Target, LUN alloc/free functionality.
321 * @hd: Pointer to MPT_SCSI_HOST structure
322 * @vtarget: per target private data
325 * NOTE: It's only SAFE to call this routine if data points to
326 * sane & valid STANDARD INQUIRY data!
328 * Allocate and initialize memory for this target.
333 mptspi_initTarget(MPT_SCSI_HOST
*hd
, VirtTarget
*vtarget
,
334 struct scsi_device
*sdev
)
337 /* Is LUN supported? If so, upper 2 bits will be 0
338 * in first byte of inquiry data.
340 if (sdev
->inq_periph_qual
!= 0)
346 vtarget
->type
= sdev
->type
;
348 if ((sdev
->type
== TYPE_PROCESSOR
) && (hd
->ioc
->spi_data
.Saf_Te
)) {
349 /* Treat all Processors as SAF-TE if
350 * command line option is set */
351 vtarget
->tflags
|= MPT_TARGET_FLAGS_SAF_TE_ISSUED
;
352 mptspi_writeIOCPage4(hd
, vtarget
->channel
, vtarget
->id
);
353 }else if ((sdev
->type
== TYPE_PROCESSOR
) &&
354 !(vtarget
->tflags
& MPT_TARGET_FLAGS_SAF_TE_ISSUED
)) {
355 if (sdev
->inquiry_len
> 49 ) {
356 if (sdev
->inquiry
[44] == 'S' &&
357 sdev
->inquiry
[45] == 'A' &&
358 sdev
->inquiry
[46] == 'F' &&
359 sdev
->inquiry
[47] == '-' &&
360 sdev
->inquiry
[48] == 'T' &&
361 sdev
->inquiry
[49] == 'E' ) {
362 vtarget
->tflags
|= MPT_TARGET_FLAGS_SAF_TE_ISSUED
;
363 mptspi_writeIOCPage4(hd
, vtarget
->channel
, vtarget
->id
);
367 mptspi_setTargetNegoParms(hd
, vtarget
, sdev
);
371 * mptspi_is_raid - Determines whether target is belonging to volume
372 * @hd: Pointer to a SCSI HOST structure
373 * @id: target device id
381 mptspi_is_raid(struct _MPT_SCSI_HOST
*hd
, u32 id
)
384 MPT_ADAPTER
*ioc
= hd
->ioc
;
386 if (!ioc
->raid_data
.pIocPg2
)
389 if (!ioc
->raid_data
.pIocPg2
->NumActiveVolumes
)
391 for (i
=0; i
< ioc
->raid_data
.pIocPg2
->NumActiveVolumes
; i
++) {
392 if (ioc
->raid_data
.pIocPg2
->RaidVolume
[i
].VolumeID
== id
) {
402 static int mptspi_target_alloc(struct scsi_target
*starget
)
404 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
405 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
413 vtarget
= kzalloc(sizeof(VirtTarget
), GFP_KERNEL
);
417 vtarget
->ioc_id
= ioc
->id
;
418 vtarget
->tflags
= MPT_TARGET_FLAGS_Q_YES
;
419 vtarget
->id
= (u8
)starget
->id
;
420 vtarget
->channel
= (u8
)starget
->channel
;
421 vtarget
->starget
= starget
;
422 starget
->hostdata
= vtarget
;
424 if (starget
->channel
== 1) {
425 if (mptscsih_is_phys_disk(ioc
, 0, starget
->id
) == 0)
427 vtarget
->tflags
|= MPT_TARGET_FLAGS_RAID_COMPONENT
;
428 /* The real channel for this device is zero */
429 vtarget
->channel
= 0;
430 /* The actual physdisknum (for RAID passthrough) */
431 vtarget
->id
= mptscsih_raid_id_to_num(ioc
, 0,
435 if (starget
->channel
== 0 &&
436 mptspi_is_raid(hd
, starget
->id
)) {
437 vtarget
->raidVolume
= 1;
438 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
439 "RAID Volume @ channel=%d id=%d\n", ioc
->name
, starget
->channel
,
443 if (ioc
->spi_data
.nvram
&&
444 ioc
->spi_data
.nvram
[starget
->id
] != MPT_HOST_NVRAM_INVALID
) {
445 u32 nvram
= ioc
->spi_data
.nvram
[starget
->id
];
446 spi_min_period(starget
) = (nvram
& MPT_NVRAM_SYNC_MASK
) >> MPT_NVRAM_SYNC_SHIFT
;
447 spi_max_width(starget
) = nvram
& MPT_NVRAM_WIDE_DISABLE
? 0 : 1;
449 spi_min_period(starget
) = ioc
->spi_data
.minSyncFactor
;
450 spi_max_width(starget
) = ioc
->spi_data
.maxBusWidth
;
452 spi_max_offset(starget
) = ioc
->spi_data
.maxSyncOffset
;
454 spi_offset(starget
) = 0;
455 spi_period(starget
) = 0xFF;
456 mptspi_write_width(starget
, 0);
462 mptspi_target_destroy(struct scsi_target
*starget
)
464 kfree(starget
->hostdata
);
465 starget
->hostdata
= NULL
;
469 * mptspi_print_write_nego - negotiation parameters debug info that is being sent
470 * @hd: Pointer to a SCSI HOST structure
471 * @starget: SCSI target
472 * @ii: negotiation parameters
476 mptspi_print_write_nego(struct _MPT_SCSI_HOST
*hd
, struct scsi_target
*starget
, u32 ii
)
478 ddvprintk(hd
->ioc
, printk(MYIOC_s_DEBUG_FMT
"id=%d Requested = 0x%08x"
479 " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
480 hd
->ioc
->name
, starget
->id
, ii
,
481 ii
& MPI_SCSIDEVPAGE0_NP_WIDE
? "Wide ": "",
482 ((ii
>> 8) & 0xFF), ((ii
>> 16) & 0xFF),
483 ii
& MPI_SCSIDEVPAGE0_NP_IU
? "IU ": "",
484 ii
& MPI_SCSIDEVPAGE0_NP_DT
? "DT ": "",
485 ii
& MPI_SCSIDEVPAGE0_NP_QAS
? "QAS ": "",
486 ii
& MPI_SCSIDEVPAGE0_NP_HOLD_MCS
? "HOLDMCS ": "",
487 ii
& MPI_SCSIDEVPAGE0_NP_WR_FLOW
? "WRFLOW ": "",
488 ii
& MPI_SCSIDEVPAGE0_NP_RD_STRM
? "RDSTRM ": "",
489 ii
& MPI_SCSIDEVPAGE0_NP_RTI
? "RTI ": "",
490 ii
& MPI_SCSIDEVPAGE0_NP_PCOMP_EN
? "PCOMP ": ""));
494 * mptspi_print_read_nego - negotiation parameters debug info that is being read
495 * @hd: Pointer to a SCSI HOST structure
496 * @starget: SCSI target
497 * @ii: negotiation parameters
501 mptspi_print_read_nego(struct _MPT_SCSI_HOST
*hd
, struct scsi_target
*starget
, u32 ii
)
503 ddvprintk(hd
->ioc
, printk(MYIOC_s_DEBUG_FMT
"id=%d Read = 0x%08x"
504 " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
505 hd
->ioc
->name
, starget
->id
, ii
,
506 ii
& MPI_SCSIDEVPAGE0_NP_WIDE
? "Wide ": "",
507 ((ii
>> 8) & 0xFF), ((ii
>> 16) & 0xFF),
508 ii
& MPI_SCSIDEVPAGE0_NP_IU
? "IU ": "",
509 ii
& MPI_SCSIDEVPAGE0_NP_DT
? "DT ": "",
510 ii
& MPI_SCSIDEVPAGE0_NP_QAS
? "QAS ": "",
511 ii
& MPI_SCSIDEVPAGE0_NP_HOLD_MCS
? "HOLDMCS ": "",
512 ii
& MPI_SCSIDEVPAGE0_NP_WR_FLOW
? "WRFLOW ": "",
513 ii
& MPI_SCSIDEVPAGE0_NP_RD_STRM
? "RDSTRM ": "",
514 ii
& MPI_SCSIDEVPAGE0_NP_RTI
? "RTI ": "",
515 ii
& MPI_SCSIDEVPAGE0_NP_PCOMP_EN
? "PCOMP ": ""));
518 static int mptspi_read_spi_device_pg0(struct scsi_target
*starget
,
519 struct _CONFIG_PAGE_SCSI_DEVICE_0
*pass_pg0
)
521 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
522 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
523 struct _MPT_ADAPTER
*ioc
= hd
->ioc
;
524 struct _CONFIG_PAGE_SCSI_DEVICE_0
*spi_dev_pg0
;
525 dma_addr_t spi_dev_pg0_dma
;
527 struct _x_config_parms cfg
;
528 struct _CONFIG_PAGE_HEADER hdr
;
531 /* No SPI parameters for RAID devices */
532 if (starget
->channel
== 0 &&
533 mptspi_is_raid(hd
, starget
->id
))
536 size
= ioc
->spi_data
.sdp0length
* 4;
538 if (ioc->spi_data.sdp0length & 1)
543 spi_dev_pg0
= dma_alloc_coherent(&ioc
->pcidev
->dev
, size
, &spi_dev_pg0_dma
, GFP_KERNEL
);
544 if (spi_dev_pg0
== NULL
) {
545 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
546 "dma_alloc_coherent for parameters failed\n", ioc
->name
);
550 memset(&hdr
, 0, sizeof(hdr
));
552 hdr
.PageVersion
= ioc
->spi_data
.sdp0version
;
553 hdr
.PageLength
= ioc
->spi_data
.sdp0length
;
555 hdr
.PageType
= MPI_CONFIG_PAGETYPE_SCSI_DEVICE
;
557 memset(&cfg
, 0, sizeof(cfg
));
559 cfg
.cfghdr
.hdr
= &hdr
;
560 cfg
.physAddr
= spi_dev_pg0_dma
;
561 cfg
.action
= MPI_CONFIG_ACTION_PAGE_READ_CURRENT
;
563 cfg
.pageAddr
= starget
->id
;
566 if (mpt_config(ioc
, &cfg
)) {
567 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
"mpt_config failed\n", ioc
->name
);
571 memcpy(pass_pg0
, spi_dev_pg0
, size
);
573 mptspi_print_read_nego(hd
, starget
, le32_to_cpu(spi_dev_pg0
->NegotiatedParameters
));
576 dma_free_coherent(&ioc
->pcidev
->dev
, size
, spi_dev_pg0
, spi_dev_pg0_dma
);
580 static u32
mptspi_getRP(struct scsi_target
*starget
)
584 nego
|= spi_iu(starget
) ? MPI_SCSIDEVPAGE1_RP_IU
: 0;
585 nego
|= spi_dt(starget
) ? MPI_SCSIDEVPAGE1_RP_DT
: 0;
586 nego
|= spi_qas(starget
) ? MPI_SCSIDEVPAGE1_RP_QAS
: 0;
587 nego
|= spi_hold_mcs(starget
) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS
: 0;
588 nego
|= spi_wr_flow(starget
) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW
: 0;
589 nego
|= spi_rd_strm(starget
) ? MPI_SCSIDEVPAGE1_RP_RD_STRM
: 0;
590 nego
|= spi_rti(starget
) ? MPI_SCSIDEVPAGE1_RP_RTI
: 0;
591 nego
|= spi_pcomp_en(starget
) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN
: 0;
593 nego
|= (spi_period(starget
) << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD
) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK
;
594 nego
|= (spi_offset(starget
) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET
) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK
;
595 nego
|= spi_width(starget
) ? MPI_SCSIDEVPAGE1_RP_WIDE
: 0;
600 static void mptspi_read_parameters(struct scsi_target
*starget
)
603 struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0
;
605 mptspi_read_spi_device_pg0(starget
, &spi_dev_pg0
);
607 nego
= le32_to_cpu(spi_dev_pg0
.NegotiatedParameters
);
609 spi_iu(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_IU
) ? 1 : 0;
610 spi_dt(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_DT
) ? 1 : 0;
611 spi_qas(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_QAS
) ? 1 : 0;
612 spi_wr_flow(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_WR_FLOW
) ? 1 : 0;
613 spi_rd_strm(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_RD_STRM
) ? 1 : 0;
614 spi_rti(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_RTI
) ? 1 : 0;
615 spi_pcomp_en(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_PCOMP_EN
) ? 1 : 0;
616 spi_hold_mcs(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_HOLD_MCS
) ? 1 : 0;
617 spi_period(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK
) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD
;
618 spi_offset(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK
) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET
;
619 spi_width(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_WIDE
) ? 1 : 0;
623 mptscsih_quiesce_raid(MPT_SCSI_HOST
*hd
, int quiesce
, u8 channel
, u8 id
)
625 MPT_ADAPTER
*ioc
= hd
->ioc
;
626 MpiRaidActionRequest_t
*pReq
;
629 unsigned long timeleft
;
631 mutex_lock(&ioc
->internal_cmds
.mutex
);
633 /* Get and Populate a free Frame
635 if ((mf
= mpt_get_msg_frame(ioc
->InternalCtx
, ioc
)) == NULL
) {
636 dfailprintk(hd
->ioc
, printk(MYIOC_s_WARN_FMT
637 "%s: no msg frames!\n", ioc
->name
, __func__
));
641 pReq
= (MpiRaidActionRequest_t
*)mf
;
643 pReq
->Action
= MPI_RAID_ACTION_QUIESCE_PHYS_IO
;
645 pReq
->Action
= MPI_RAID_ACTION_ENABLE_PHYS_IO
;
647 pReq
->ChainOffset
= 0;
648 pReq
->Function
= MPI_FUNCTION_RAID_ACTION
;
650 pReq
->VolumeBus
= channel
;
651 pReq
->PhysDiskNum
= 0;
654 pReq
->ActionDataWord
= 0; /* Reserved for this action */
656 ioc
->add_sge((char *)&pReq
->ActionDataSGE
,
657 MPT_SGE_FLAGS_SSIMPLE_READ
| 0, (dma_addr_t
) -1);
659 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
"RAID Volume action=%x channel=%d id=%d\n",
660 ioc
->name
, pReq
->Action
, channel
, id
));
662 INITIALIZE_MGMT_STATUS(ioc
->internal_cmds
.status
)
663 mpt_put_msg_frame(ioc
->InternalCtx
, ioc
, mf
);
664 timeleft
= wait_for_completion_timeout(&ioc
->internal_cmds
.done
, 10*HZ
);
665 if (!(ioc
->internal_cmds
.status
& MPT_MGMT_STATUS_COMMAND_GOOD
)) {
667 dfailprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
"%s: TIMED OUT!\n",
668 ioc
->name
, __func__
));
669 if (ioc
->internal_cmds
.status
& MPT_MGMT_STATUS_DID_IOCRESET
)
672 printk(MYIOC_s_WARN_FMT
"Issuing Reset from %s!!\n",
673 ioc
->name
, __func__
);
674 mpt_HardResetHandler(ioc
, CAN_SLEEP
);
675 mpt_free_msg_frame(ioc
, mf
);
680 ret
= ioc
->internal_cmds
.completion_code
;
683 CLEAR_MGMT_STATUS(ioc
->internal_cmds
.status
)
684 mutex_unlock(&ioc
->internal_cmds
.mutex
);
688 static void mptspi_dv_device(struct _MPT_SCSI_HOST
*hd
,
689 struct scsi_device
*sdev
)
691 VirtTarget
*vtarget
= scsi_target(sdev
)->hostdata
;
692 MPT_ADAPTER
*ioc
= hd
->ioc
;
694 /* no DV on RAID devices */
695 if (sdev
->channel
== 0 &&
696 mptspi_is_raid(hd
, sdev
->id
))
699 /* If this is a piece of a RAID, then quiesce first */
700 if (sdev
->channel
== 1 &&
701 mptscsih_quiesce_raid(hd
, 1, vtarget
->channel
, vtarget
->id
) < 0) {
702 starget_printk(KERN_ERR
, scsi_target(sdev
), MYIOC_s_FMT
703 "Integrated RAID quiesce failed\n", ioc
->name
);
707 hd
->spi_pending
|= (1 << sdev
->id
);
709 hd
->spi_pending
&= ~(1 << sdev
->id
);
711 if (sdev
->channel
== 1 &&
712 mptscsih_quiesce_raid(hd
, 0, vtarget
->channel
, vtarget
->id
) < 0)
713 starget_printk(KERN_ERR
, scsi_target(sdev
), MYIOC_s_FMT
714 "Integrated RAID resume failed\n", ioc
->name
);
716 mptspi_read_parameters(sdev
->sdev_target
);
717 spi_display_xfer_agreement(sdev
->sdev_target
);
718 mptspi_read_parameters(sdev
->sdev_target
);
721 static int mptspi_slave_alloc(struct scsi_device
*sdev
)
723 MPT_SCSI_HOST
*hd
= shost_priv(sdev
->host
);
726 struct scsi_target
*starget
;
727 MPT_ADAPTER
*ioc
= hd
->ioc
;
729 if (sdev
->channel
== 1 &&
730 mptscsih_is_phys_disk(ioc
, 0, sdev
->id
) == 0)
733 vdevice
= kzalloc(sizeof(VirtDevice
), GFP_KERNEL
);
735 printk(MYIOC_s_ERR_FMT
"slave_alloc kmalloc(%zd) FAILED!\n",
736 ioc
->name
, sizeof(VirtDevice
));
740 vdevice
->lun
= sdev
->lun
;
741 sdev
->hostdata
= vdevice
;
743 starget
= scsi_target(sdev
);
744 vtarget
= starget
->hostdata
;
745 vdevice
->vtarget
= vtarget
;
748 if (sdev
->channel
== 1)
749 sdev
->no_uld_attach
= 1;
754 static int mptspi_slave_configure(struct scsi_device
*sdev
)
756 struct _MPT_SCSI_HOST
*hd
= shost_priv(sdev
->host
);
757 VirtTarget
*vtarget
= scsi_target(sdev
)->hostdata
;
760 mptspi_initTarget(hd
, vtarget
, sdev
);
762 ret
= mptscsih_slave_configure(sdev
);
767 ddvprintk(hd
->ioc
, printk(MYIOC_s_DEBUG_FMT
"id=%d min_period=0x%02x"
768 " max_offset=0x%02x max_width=%d\n", hd
->ioc
->name
,
769 sdev
->id
, spi_min_period(scsi_target(sdev
)),
770 spi_max_offset(scsi_target(sdev
)),
771 spi_max_width(scsi_target(sdev
))));
773 if ((sdev
->channel
== 1 ||
774 !(mptspi_is_raid(hd
, sdev
->id
))) &&
775 !spi_initial_dv(sdev
->sdev_target
))
776 mptspi_dv_device(hd
, sdev
);
782 mptspi_qcmd(struct Scsi_Host
*shost
, struct scsi_cmnd
*SCpnt
)
784 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
785 VirtDevice
*vdevice
= SCpnt
->device
->hostdata
;
786 MPT_ADAPTER
*ioc
= hd
->ioc
;
788 if (!vdevice
|| !vdevice
->vtarget
) {
789 SCpnt
->result
= DID_NO_CONNECT
<< 16;
790 SCpnt
->scsi_done(SCpnt
);
794 if (SCpnt
->device
->channel
== 1 &&
795 mptscsih_is_phys_disk(ioc
, 0, SCpnt
->device
->id
) == 0) {
796 SCpnt
->result
= DID_NO_CONNECT
<< 16;
797 SCpnt
->scsi_done(SCpnt
);
801 if (spi_dv_pending(scsi_target(SCpnt
->device
)))
802 ddvprintk(ioc
, scsi_print_command(SCpnt
));
804 return mptscsih_qcmd(SCpnt
);
807 static void mptspi_slave_destroy(struct scsi_device
*sdev
)
809 struct scsi_target
*starget
= scsi_target(sdev
);
810 VirtTarget
*vtarget
= starget
->hostdata
;
811 VirtDevice
*vdevice
= sdev
->hostdata
;
813 /* Will this be the last lun on a non-raid device? */
814 if (vtarget
->num_luns
== 1 && vdevice
->configured_lun
) {
815 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
818 pg1
.RequestedParameters
= 0;
820 pg1
.Configuration
= 0;
822 mptspi_write_spi_device_pg1(starget
, &pg1
);
825 mptscsih_slave_destroy(sdev
);
828 static struct scsi_host_template mptspi_driver_template
= {
829 .module
= THIS_MODULE
,
830 .proc_name
= "mptspi",
831 .show_info
= mptscsih_show_info
,
832 .name
= "MPT SPI Host",
833 .info
= mptscsih_info
,
834 .queuecommand
= mptspi_qcmd
,
835 .target_alloc
= mptspi_target_alloc
,
836 .slave_alloc
= mptspi_slave_alloc
,
837 .slave_configure
= mptspi_slave_configure
,
838 .target_destroy
= mptspi_target_destroy
,
839 .slave_destroy
= mptspi_slave_destroy
,
840 .change_queue_depth
= mptscsih_change_queue_depth
,
841 .eh_abort_handler
= mptscsih_abort
,
842 .eh_device_reset_handler
= mptscsih_dev_reset
,
843 .eh_bus_reset_handler
= mptscsih_bus_reset
,
844 .eh_host_reset_handler
= mptscsih_host_reset
,
845 .bios_param
= mptscsih_bios_param
,
846 .can_queue
= MPT_SCSI_CAN_QUEUE
,
848 .sg_tablesize
= MPT_SCSI_SG_DEPTH
,
851 .use_clustering
= ENABLE_CLUSTERING
,
852 .shost_attrs
= mptscsih_host_attrs
,
855 static int mptspi_write_spi_device_pg1(struct scsi_target
*starget
,
856 struct _CONFIG_PAGE_SCSI_DEVICE_1
*pass_pg1
)
858 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
859 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
860 struct _MPT_ADAPTER
*ioc
= hd
->ioc
;
861 struct _CONFIG_PAGE_SCSI_DEVICE_1
*pg1
;
864 struct _x_config_parms cfg
;
865 struct _CONFIG_PAGE_HEADER hdr
;
869 struct scsi_device
*sdev
;
872 /* don't allow updating nego parameters on RAID devices */
873 if (starget
->channel
== 0 &&
874 mptspi_is_raid(hd
, starget
->id
))
877 size
= ioc
->spi_data
.sdp1length
* 4;
879 pg1
= dma_alloc_coherent(&ioc
->pcidev
->dev
, size
, &pg1_dma
, GFP_KERNEL
);
881 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
882 "dma_alloc_coherent for parameters failed\n", ioc
->name
);
886 memset(&hdr
, 0, sizeof(hdr
));
888 hdr
.PageVersion
= ioc
->spi_data
.sdp1version
;
889 hdr
.PageLength
= ioc
->spi_data
.sdp1length
;
891 hdr
.PageType
= MPI_CONFIG_PAGETYPE_SCSI_DEVICE
;
893 memset(&cfg
, 0, sizeof(cfg
));
895 cfg
.cfghdr
.hdr
= &hdr
;
896 cfg
.physAddr
= pg1_dma
;
897 cfg
.action
= MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT
;
899 cfg
.pageAddr
= starget
->id
;
901 memcpy(pg1
, pass_pg1
, size
);
903 pg1
->Header
.PageVersion
= hdr
.PageVersion
;
904 pg1
->Header
.PageLength
= hdr
.PageLength
;
905 pg1
->Header
.PageNumber
= hdr
.PageNumber
;
906 pg1
->Header
.PageType
= hdr
.PageType
;
908 nego_parms
= le32_to_cpu(pg1
->RequestedParameters
);
909 period
= (nego_parms
& MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK
) >>
910 MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD
;
912 /* Turn on inline data padding for TAPE when running U320 */
913 for (i
= 0 ; i
< 16; i
++) {
914 sdev
= scsi_device_lookup_by_target(starget
, i
);
915 if (sdev
&& sdev
->type
== TYPE_TAPE
) {
916 sdev_printk(KERN_DEBUG
, sdev
, MYIOC_s_FMT
917 "IDP:ON\n", ioc
->name
);
918 nego_parms
|= MPI_SCSIDEVPAGE1_RP_IDP
;
919 pg1
->RequestedParameters
=
920 cpu_to_le32(nego_parms
);
926 mptspi_print_write_nego(hd
, starget
, le32_to_cpu(pg1
->RequestedParameters
));
928 if (mpt_config(ioc
, &cfg
)) {
929 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
930 "mpt_config failed\n", ioc
->name
);
936 dma_free_coherent(&ioc
->pcidev
->dev
, size
, pg1
, pg1_dma
);
940 static void mptspi_write_offset(struct scsi_target
*starget
, int offset
)
942 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
951 if (spi_offset(starget
) == -1)
952 mptspi_read_parameters(starget
);
954 spi_offset(starget
) = offset
;
956 nego
= mptspi_getRP(starget
);
958 pg1
.RequestedParameters
= cpu_to_le32(nego
);
960 pg1
.Configuration
= 0;
962 mptspi_write_spi_device_pg1(starget
, &pg1
);
965 static void mptspi_write_period(struct scsi_target
*starget
, int period
)
967 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
976 if (spi_period(starget
) == -1)
977 mptspi_read_parameters(starget
);
982 } else if (period
== 9) {
986 spi_period(starget
) = period
;
988 nego
= mptspi_getRP(starget
);
990 pg1
.RequestedParameters
= cpu_to_le32(nego
);
992 pg1
.Configuration
= 0;
994 mptspi_write_spi_device_pg1(starget
, &pg1
);
997 static void mptspi_write_dt(struct scsi_target
*starget
, int dt
)
999 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1002 if (spi_period(starget
) == -1)
1003 mptspi_read_parameters(starget
);
1005 if (!dt
&& spi_period(starget
) < 10)
1006 spi_period(starget
) = 10;
1008 spi_dt(starget
) = dt
;
1010 nego
= mptspi_getRP(starget
);
1013 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1015 pg1
.Configuration
= 0;
1017 mptspi_write_spi_device_pg1(starget
, &pg1
);
1020 static void mptspi_write_iu(struct scsi_target
*starget
, int iu
)
1022 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1025 if (spi_period(starget
) == -1)
1026 mptspi_read_parameters(starget
);
1028 if (!iu
&& spi_period(starget
) < 9)
1029 spi_period(starget
) = 9;
1031 spi_iu(starget
) = iu
;
1033 nego
= mptspi_getRP(starget
);
1035 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1037 pg1
.Configuration
= 0;
1039 mptspi_write_spi_device_pg1(starget
, &pg1
);
1042 #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) \
1043 static void mptspi_write_##parm(struct scsi_target *starget, int parm)\
1045 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; \
1048 spi_##parm(starget) = parm; \
1050 nego = mptspi_getRP(starget); \
1052 pg1.RequestedParameters = cpu_to_le32(nego); \
1054 pg1.Configuration = 0; \
1056 mptspi_write_spi_device_pg1(starget, &pg1); \
1059 MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm
)
1060 MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow
)
1061 MPTSPI_SIMPLE_TRANSPORT_PARM(rti
)
1062 MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs
)
1063 MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en
)
1065 static void mptspi_write_qas(struct scsi_target
*starget
, int qas
)
1067 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1068 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
1069 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
1070 VirtTarget
*vtarget
= starget
->hostdata
;
1073 if ((vtarget
->negoFlags
& MPT_TARGET_NO_NEGO_QAS
) ||
1074 hd
->ioc
->spi_data
.noQas
)
1075 spi_qas(starget
) = 0;
1077 spi_qas(starget
) = qas
;
1079 nego
= mptspi_getRP(starget
);
1081 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1083 pg1
.Configuration
= 0;
1085 mptspi_write_spi_device_pg1(starget
, &pg1
);
1088 static void mptspi_write_width(struct scsi_target
*starget
, int width
)
1090 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1094 spi_dt(starget
) = 0;
1095 if (spi_period(starget
) < 10)
1096 spi_period(starget
) = 10;
1099 spi_width(starget
) = width
;
1101 nego
= mptspi_getRP(starget
);
1103 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1105 pg1
.Configuration
= 0;
1107 mptspi_write_spi_device_pg1(starget
, &pg1
);
1110 struct work_queue_wrapper
{
1111 struct work_struct work
;
1112 struct _MPT_SCSI_HOST
*hd
;
1116 static void mpt_work_wrapper(struct work_struct
*work
)
1118 struct work_queue_wrapper
*wqw
=
1119 container_of(work
, struct work_queue_wrapper
, work
);
1120 struct _MPT_SCSI_HOST
*hd
= wqw
->hd
;
1121 MPT_ADAPTER
*ioc
= hd
->ioc
;
1122 struct Scsi_Host
*shost
= ioc
->sh
;
1123 struct scsi_device
*sdev
;
1124 int disk
= wqw
->disk
;
1125 struct _CONFIG_PAGE_IOC_3
*pg3
;
1129 mpt_findImVolumes(ioc
);
1130 pg3
= ioc
->raid_data
.pIocPg3
;
1134 shost_for_each_device(sdev
,shost
) {
1135 struct scsi_target
*starget
= scsi_target(sdev
);
1136 VirtTarget
*vtarget
= starget
->hostdata
;
1138 /* only want to search RAID components */
1139 if (sdev
->channel
!= 1)
1142 /* The id is the raid PhysDiskNum, even if
1143 * starget->id is the actual target address */
1144 if(vtarget
->id
!= disk
)
1147 starget_printk(KERN_INFO
, vtarget
->starget
, MYIOC_s_FMT
1148 "Integrated RAID requests DV of new device\n", ioc
->name
);
1149 mptspi_dv_device(hd
, sdev
);
1151 shost_printk(KERN_INFO
, shost
, MYIOC_s_FMT
1152 "Integrated RAID detects new device %d\n", ioc
->name
, disk
);
1153 scsi_scan_target(&ioc
->sh
->shost_gendev
, 1, disk
, 0, SCSI_SCAN_RESCAN
);
1157 static void mpt_dv_raid(struct _MPT_SCSI_HOST
*hd
, int disk
)
1159 struct work_queue_wrapper
*wqw
= kmalloc(sizeof(*wqw
), GFP_ATOMIC
);
1160 MPT_ADAPTER
*ioc
= hd
->ioc
;
1163 shost_printk(KERN_ERR
, ioc
->sh
, MYIOC_s_FMT
1164 "Failed to act on RAID event for physical disk %d\n",
1168 INIT_WORK(&wqw
->work
, mpt_work_wrapper
);
1172 schedule_work(&wqw
->work
);
1176 mptspi_event_process(MPT_ADAPTER
*ioc
, EventNotificationReply_t
*pEvReply
)
1178 u8 event
= le32_to_cpu(pEvReply
->Event
) & 0xFF;
1179 struct _MPT_SCSI_HOST
*hd
= shost_priv(ioc
->sh
);
1181 if (ioc
->bus_type
!= SPI
)
1184 if (hd
&& event
== MPI_EVENT_INTEGRATED_RAID
) {
1186 = (le32_to_cpu(pEvReply
->Data
[0]) & 0x00FF0000) >> 16;
1188 if (reason
== MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED
) {
1189 int disk
= (le32_to_cpu(pEvReply
->Data
[0]) & 0xFF000000) >> 24;
1190 mpt_dv_raid(hd
, disk
);
1193 return mptscsih_event_process(ioc
, pEvReply
);
1197 mptspi_deny_binding(struct scsi_target
*starget
)
1199 struct _MPT_SCSI_HOST
*hd
=
1200 (struct _MPT_SCSI_HOST
*)dev_to_shost(starget
->dev
.parent
)->hostdata
;
1201 return ((mptspi_is_raid(hd
, starget
->id
)) &&
1202 starget
->channel
== 0) ? 1 : 0;
1205 static struct spi_function_template mptspi_transport_functions
= {
1206 .get_offset
= mptspi_read_parameters
,
1207 .set_offset
= mptspi_write_offset
,
1209 .get_period
= mptspi_read_parameters
,
1210 .set_period
= mptspi_write_period
,
1212 .get_width
= mptspi_read_parameters
,
1213 .set_width
= mptspi_write_width
,
1215 .get_iu
= mptspi_read_parameters
,
1216 .set_iu
= mptspi_write_iu
,
1218 .get_dt
= mptspi_read_parameters
,
1219 .set_dt
= mptspi_write_dt
,
1221 .get_qas
= mptspi_read_parameters
,
1222 .set_qas
= mptspi_write_qas
,
1224 .get_wr_flow
= mptspi_read_parameters
,
1225 .set_wr_flow
= mptspi_write_wr_flow
,
1227 .get_rd_strm
= mptspi_read_parameters
,
1228 .set_rd_strm
= mptspi_write_rd_strm
,
1230 .get_rti
= mptspi_read_parameters
,
1231 .set_rti
= mptspi_write_rti
,
1233 .get_pcomp_en
= mptspi_read_parameters
,
1234 .set_pcomp_en
= mptspi_write_pcomp_en
,
1236 .get_hold_mcs
= mptspi_read_parameters
,
1237 .set_hold_mcs
= mptspi_write_hold_mcs
,
1239 .deny_binding
= mptspi_deny_binding
,
1242 /****************************************************************************
1243 * Supported hardware
1246 static struct pci_device_id mptspi_pci_table
[] = {
1247 { PCI_VENDOR_ID_LSI_LOGIC
, MPI_MANUFACTPAGE_DEVID_53C1030
,
1248 PCI_ANY_ID
, PCI_ANY_ID
},
1249 { PCI_VENDOR_ID_ATTO
, MPI_MANUFACTPAGE_DEVID_53C1030
,
1250 PCI_ANY_ID
, PCI_ANY_ID
},
1251 { PCI_VENDOR_ID_LSI_LOGIC
, MPI_MANUFACTPAGE_DEVID_53C1035
,
1252 PCI_ANY_ID
, PCI_ANY_ID
},
1253 {0} /* Terminating entry */
1255 MODULE_DEVICE_TABLE(pci
, mptspi_pci_table
);
1259 * renegotiate for a given target
1262 mptspi_dv_renegotiate_work(struct work_struct
*work
)
1264 struct work_queue_wrapper
*wqw
=
1265 container_of(work
, struct work_queue_wrapper
, work
);
1266 struct _MPT_SCSI_HOST
*hd
= wqw
->hd
;
1267 struct scsi_device
*sdev
;
1268 struct scsi_target
*starget
;
1269 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1271 MPT_ADAPTER
*ioc
= hd
->ioc
;
1275 if (hd
->spi_pending
) {
1276 shost_for_each_device(sdev
, ioc
->sh
) {
1277 if (hd
->spi_pending
& (1 << sdev
->id
))
1279 starget
= scsi_target(sdev
);
1280 nego
= mptspi_getRP(starget
);
1281 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1283 pg1
.Configuration
= 0;
1284 mptspi_write_spi_device_pg1(starget
, &pg1
);
1287 shost_for_each_device(sdev
, ioc
->sh
)
1288 mptspi_dv_device(hd
, sdev
);
1293 mptspi_dv_renegotiate(struct _MPT_SCSI_HOST
*hd
)
1295 struct work_queue_wrapper
*wqw
= kmalloc(sizeof(*wqw
), GFP_ATOMIC
);
1300 INIT_WORK(&wqw
->work
, mptspi_dv_renegotiate_work
);
1303 schedule_work(&wqw
->work
);
1307 * spi module reset handler
1310 mptspi_ioc_reset(MPT_ADAPTER
*ioc
, int reset_phase
)
1314 rc
= mptscsih_ioc_reset(ioc
, reset_phase
);
1315 if ((ioc
->bus_type
!= SPI
) || (!rc
))
1318 /* only try to do a renegotiation if we're properly set up
1319 * if we get an ioc fault on bringup, ioc->sh will be NULL */
1320 if (reset_phase
== MPT_IOC_POST_RESET
&&
1322 struct _MPT_SCSI_HOST
*hd
= shost_priv(ioc
->sh
);
1324 mptspi_dv_renegotiate(hd
);
1332 * spi module resume handler
1335 mptspi_resume(struct pci_dev
*pdev
)
1337 MPT_ADAPTER
*ioc
= pci_get_drvdata(pdev
);
1338 struct _MPT_SCSI_HOST
*hd
= shost_priv(ioc
->sh
);
1341 rc
= mptscsih_resume(pdev
);
1342 mptspi_dv_renegotiate(hd
);
1348 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1349 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1351 * mptspi_probe - Installs scsi devices per bus.
1352 * @pdev: Pointer to pci_dev structure
1354 * Returns 0 for success, non-zero for failure.
1358 mptspi_probe(struct pci_dev
*pdev
, const struct pci_device_id
*id
)
1360 struct Scsi_Host
*sh
;
1363 unsigned long flags
;
1371 if ((r
= mpt_attach(pdev
,id
)) != 0)
1374 ioc
= pci_get_drvdata(pdev
);
1375 ioc
->DoneCtx
= mptspiDoneCtx
;
1376 ioc
->TaskCtx
= mptspiTaskCtx
;
1377 ioc
->InternalCtx
= mptspiInternalCtx
;
1379 /* Added sanity check on readiness of the MPT adapter.
1381 if (ioc
->last_state
!= MPI_IOC_STATE_OPERATIONAL
) {
1382 printk(MYIOC_s_WARN_FMT
1383 "Skipping because it's not operational!\n",
1386 goto out_mptspi_probe
;
1390 printk(MYIOC_s_WARN_FMT
"Skipping because it's disabled!\n",
1393 goto out_mptspi_probe
;
1396 /* Sanity check - ensure at least 1 port is INITIATOR capable
1399 for (ii
=0; ii
< ioc
->facts
.NumberOfPorts
; ii
++) {
1400 if (ioc
->pfacts
[ii
].ProtocolFlags
&
1401 MPI_PORTFACTS_PROTOCOL_INITIATOR
)
1406 printk(MYIOC_s_WARN_FMT
1407 "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
1412 sh
= scsi_host_alloc(&mptspi_driver_template
, sizeof(MPT_SCSI_HOST
));
1415 printk(MYIOC_s_WARN_FMT
1416 "Unable to register controller with SCSI subsystem\n",
1419 goto out_mptspi_probe
;
1422 /* VMWare emulation doesn't properly implement WRITE_SAME
1424 if (pdev
->subsystem_vendor
== 0x15AD)
1425 sh
->no_write_same
= 1;
1427 spin_lock_irqsave(&ioc
->FreeQlock
, flags
);
1429 /* Attach the SCSI Host to the IOC structure
1437 /* set 16 byte cdb's */
1438 sh
->max_cmd_len
= 16;
1440 /* Yikes! This is important!
1441 * Otherwise, by default, linux
1442 * only scans target IDs 0-7!
1443 * pfactsN->MaxDevices unreliable
1444 * (not supported in early
1445 * versions of the FW).
1446 * max_id = 1 + actual max id,
1447 * max_lun = 1 + actual last lun,
1450 sh
->max_id
= ioc
->devices_per_bus
;
1452 sh
->max_lun
= MPT_LAST_LUN
+ 1;
1454 * If RAID Firmware Detected, setup virtual channel
1456 if (ioc
->ir_firmware
)
1457 sh
->max_channel
= 1;
1459 sh
->max_channel
= 0;
1460 sh
->this_id
= ioc
->pfacts
[0].PortSCSIID
;
1464 sh
->unique_id
= ioc
->id
;
1466 /* Verify that we won't exceed the maximum
1467 * number of chain buffers
1468 * We can optimize: ZZ = req_sz/sizeof(SGE)
1470 * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
1471 * + (req_sz - 64)/sizeof(SGE)
1472 * A slightly different algorithm is required for
1475 scale
= ioc
->req_sz
/ioc
->SGE_size
;
1476 if (ioc
->sg_addr_size
== sizeof(u64
)) {
1477 numSGE
= (scale
- 1) *
1478 (ioc
->facts
.MaxChainDepth
-1) + scale
+
1479 (ioc
->req_sz
- 60) / ioc
->SGE_size
;
1481 numSGE
= 1 + (scale
- 1) *
1482 (ioc
->facts
.MaxChainDepth
-1) + scale
+
1483 (ioc
->req_sz
- 64) / ioc
->SGE_size
;
1486 if (numSGE
< sh
->sg_tablesize
) {
1487 /* Reset this value */
1488 dprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
1489 "Resetting sg_tablesize to %d from %d\n",
1490 ioc
->name
, numSGE
, sh
->sg_tablesize
));
1491 sh
->sg_tablesize
= numSGE
;
1494 spin_unlock_irqrestore(&ioc
->FreeQlock
, flags
);
1496 hd
= shost_priv(sh
);
1499 /* SCSI needs scsi_cmnd lookup table!
1500 * (with size equal to req_depth*PtrSz!)
1502 ioc
->ScsiLookup
= kcalloc(ioc
->req_depth
, sizeof(void *), GFP_ATOMIC
);
1503 if (!ioc
->ScsiLookup
) {
1505 goto out_mptspi_probe
;
1507 spin_lock_init(&ioc
->scsi_lookup_lock
);
1509 dprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
"ScsiLookup @ %p\n",
1510 ioc
->name
, ioc
->ScsiLookup
));
1512 ioc
->spi_data
.Saf_Te
= mpt_saf_te
;
1513 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
1517 ioc
->spi_data
.noQas
= 0;
1519 hd
->last_queue_full
= 0;
1520 hd
->spi_pending
= 0;
1522 /* Some versions of the firmware don't support page 0; without
1523 * that we can't get the parameters */
1524 if (ioc
->spi_data
.sdp0length
!= 0)
1525 sh
->transportt
= mptspi_transport_template
;
1527 error
= scsi_add_host (sh
, &ioc
->pcidev
->dev
);
1529 dprintk(ioc
, printk(MYIOC_s_ERR_FMT
1530 "scsi_add_host failed\n", ioc
->name
));
1531 goto out_mptspi_probe
;
1535 * issue internal bus reset
1537 if (ioc
->spi_data
.bus_reset
)
1538 mptscsih_IssueTaskMgmt(hd
,
1539 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS
,
1547 mptscsih_remove(pdev
);
1551 static struct pci_driver mptspi_driver
= {
1553 .id_table
= mptspi_pci_table
,
1554 .probe
= mptspi_probe
,
1555 .remove
= mptscsih_remove
,
1556 .shutdown
= mptscsih_shutdown
,
1558 .suspend
= mptscsih_suspend
,
1559 .resume
= mptspi_resume
,
1563 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1565 * mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
1567 * Returns 0 for success, non-zero for failure.
1574 show_mptmod_ver(my_NAME
, my_VERSION
);
1576 mptspi_transport_template
= spi_attach_transport(&mptspi_transport_functions
);
1577 if (!mptspi_transport_template
)
1580 mptspiDoneCtx
= mpt_register(mptscsih_io_done
, MPTSPI_DRIVER
,
1581 "mptscsih_io_done");
1582 mptspiTaskCtx
= mpt_register(mptscsih_taskmgmt_complete
, MPTSPI_DRIVER
,
1583 "mptscsih_taskmgmt_complete");
1584 mptspiInternalCtx
= mpt_register(mptscsih_scandv_complete
,
1585 MPTSPI_DRIVER
, "mptscsih_scandv_complete");
1587 mpt_event_register(mptspiDoneCtx
, mptspi_event_process
);
1588 mpt_reset_register(mptspiDoneCtx
, mptspi_ioc_reset
);
1590 error
= pci_register_driver(&mptspi_driver
);
1592 spi_release_transport(mptspi_transport_template
);
1597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1598 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1600 * mptspi_exit - Unregisters MPT adapter(s)
1605 pci_unregister_driver(&mptspi_driver
);
1607 mpt_reset_deregister(mptspiDoneCtx
);
1608 mpt_event_deregister(mptspiDoneCtx
);
1610 mpt_deregister(mptspiInternalCtx
);
1611 mpt_deregister(mptspiTaskCtx
);
1612 mpt_deregister(mptspiDoneCtx
);
1613 spi_release_transport(mptspi_transport_template
);
1616 module_init(mptspi_init
);
1617 module_exit(mptspi_exit
);