1 // SPDX-License-Identifier: GPL-2.0-only
3 * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM
5 * Created by: Nicolas Pitre, March 2012
6 * Copyright: (C) 2012-2013 Linaro Limited
9 #include <linux/export.h>
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/irqflags.h>
13 #include <linux/cpu_pm.h>
16 #include <asm/cacheflush.h>
17 #include <asm/idmap.h>
18 #include <asm/cputype.h>
19 #include <asm/suspend.h>
22 * The public API for this code is documented in arch/arm/include/asm/mcpm.h.
23 * For a comprehensive description of the main algorithm used here, please
24 * see Documentation/arm/cluster-pm-race-avoidance.rst.
27 struct sync_struct mcpm_sync
;
30 * __mcpm_cpu_going_down: Indicates that the cpu is being torn down.
31 * This must be called at the point of committing to teardown of a CPU.
32 * The CPU cache (SCTRL.C bit) is expected to still be active.
34 static void __mcpm_cpu_going_down(unsigned int cpu
, unsigned int cluster
)
36 mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
= CPU_GOING_DOWN
;
37 sync_cache_w(&mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
);
41 * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the
42 * cluster can be torn down without disrupting this CPU.
43 * To avoid deadlocks, this must be called before a CPU is powered down.
44 * The CPU cache (SCTRL.C bit) is expected to be off.
45 * However L2 cache might or might not be active.
47 static void __mcpm_cpu_down(unsigned int cpu
, unsigned int cluster
)
50 mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
= CPU_DOWN
;
51 sync_cache_w(&mcpm_sync
.clusters
[cluster
].cpus
[cpu
].cpu
);
56 * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section.
57 * @state: the final state of the cluster:
58 * CLUSTER_UP: no destructive teardown was done and the cluster has been
59 * restored to the previous state (CPU cache still active); or
60 * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off
61 * (CPU cache disabled, L2 cache either enabled or disabled).
63 static void __mcpm_outbound_leave_critical(unsigned int cluster
, int state
)
66 mcpm_sync
.clusters
[cluster
].cluster
= state
;
67 sync_cache_w(&mcpm_sync
.clusters
[cluster
].cluster
);
72 * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section.
73 * This function should be called by the last man, after local CPU teardown
74 * is complete. CPU cache expected to be active.
77 * false: the critical section was not entered because an inbound CPU was
78 * observed, or the cluster is already being set up;
79 * true: the critical section was entered: it is now safe to tear down the
82 static bool __mcpm_outbound_enter_critical(unsigned int cpu
, unsigned int cluster
)
85 struct mcpm_sync_struct
*c
= &mcpm_sync
.clusters
[cluster
];
87 /* Warn inbound CPUs that the cluster is being torn down: */
88 c
->cluster
= CLUSTER_GOING_DOWN
;
89 sync_cache_w(&c
->cluster
);
91 /* Back out if the inbound cluster is already in the critical region: */
92 sync_cache_r(&c
->inbound
);
93 if (c
->inbound
== INBOUND_COMING_UP
)
97 * Wait for all CPUs to get out of the GOING_DOWN state, so that local
98 * teardown is complete on each CPU before tearing down the cluster.
100 * If any CPU has been woken up again from the DOWN state, then we
101 * shouldn't be taking the cluster down at all: abort in that case.
103 sync_cache_r(&c
->cpus
);
104 for (i
= 0; i
< MAX_CPUS_PER_CLUSTER
; i
++) {
111 cpustate
= c
->cpus
[i
].cpu
;
112 if (cpustate
!= CPU_GOING_DOWN
)
116 sync_cache_r(&c
->cpus
[i
].cpu
);
131 __mcpm_outbound_leave_critical(cluster
, CLUSTER_UP
);
135 static int __mcpm_cluster_state(unsigned int cluster
)
137 sync_cache_r(&mcpm_sync
.clusters
[cluster
].cluster
);
138 return mcpm_sync
.clusters
[cluster
].cluster
;
141 extern unsigned long mcpm_entry_vectors
[MAX_NR_CLUSTERS
][MAX_CPUS_PER_CLUSTER
];
143 void mcpm_set_entry_vector(unsigned cpu
, unsigned cluster
, void *ptr
)
145 unsigned long val
= ptr
? __pa_symbol(ptr
) : 0;
146 mcpm_entry_vectors
[cluster
][cpu
] = val
;
147 sync_cache_w(&mcpm_entry_vectors
[cluster
][cpu
]);
150 extern unsigned long mcpm_entry_early_pokes
[MAX_NR_CLUSTERS
][MAX_CPUS_PER_CLUSTER
][2];
152 void mcpm_set_early_poke(unsigned cpu
, unsigned cluster
,
153 unsigned long poke_phys_addr
, unsigned long poke_val
)
155 unsigned long *poke
= &mcpm_entry_early_pokes
[cluster
][cpu
][0];
156 poke
[0] = poke_phys_addr
;
158 __sync_cache_range_w(poke
, 2 * sizeof(*poke
));
161 static const struct mcpm_platform_ops
*platform_ops
;
163 int __init
mcpm_platform_register(const struct mcpm_platform_ops
*ops
)
171 bool mcpm_is_available(void)
173 return (platform_ops
) ? true : false;
175 EXPORT_SYMBOL_GPL(mcpm_is_available
);
178 * We can't use regular spinlocks. In the switcher case, it is possible
179 * for an outbound CPU to call power_down() after its inbound counterpart
180 * is already live using the same logical CPU number which trips lockdep
183 static arch_spinlock_t mcpm_lock
= __ARCH_SPIN_LOCK_UNLOCKED
;
185 static int mcpm_cpu_use_count
[MAX_NR_CLUSTERS
][MAX_CPUS_PER_CLUSTER
];
187 static inline bool mcpm_cluster_unused(unsigned int cluster
)
190 for (i
= 0, cnt
= 0; i
< MAX_CPUS_PER_CLUSTER
; i
++)
191 cnt
|= mcpm_cpu_use_count
[cluster
][i
];
195 int mcpm_cpu_power_up(unsigned int cpu
, unsigned int cluster
)
197 bool cpu_is_down
, cluster_is_down
;
200 pr_debug("%s: cpu %u cluster %u\n", __func__
, cpu
, cluster
);
202 return -EUNATCH
; /* try not to shadow power_up errors */
206 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
207 * variant exists, we need to disable IRQs manually here.
210 arch_spin_lock(&mcpm_lock
);
212 cpu_is_down
= !mcpm_cpu_use_count
[cluster
][cpu
];
213 cluster_is_down
= mcpm_cluster_unused(cluster
);
215 mcpm_cpu_use_count
[cluster
][cpu
]++;
217 * The only possible values are:
220 * 2 = CPU requested to be up before it had a chance
221 * to actually make itself down.
222 * Any other value is a bug.
224 BUG_ON(mcpm_cpu_use_count
[cluster
][cpu
] != 1 &&
225 mcpm_cpu_use_count
[cluster
][cpu
] != 2);
228 ret
= platform_ops
->cluster_powerup(cluster
);
229 if (cpu_is_down
&& !ret
)
230 ret
= platform_ops
->cpu_powerup(cpu
, cluster
);
232 arch_spin_unlock(&mcpm_lock
);
237 typedef typeof(cpu_reset
) phys_reset_t
;
239 void mcpm_cpu_power_down(void)
241 unsigned int mpidr
, cpu
, cluster
;
242 bool cpu_going_down
, last_man
;
243 phys_reset_t phys_reset
;
245 mpidr
= read_cpuid_mpidr();
246 cpu
= MPIDR_AFFINITY_LEVEL(mpidr
, 0);
247 cluster
= MPIDR_AFFINITY_LEVEL(mpidr
, 1);
248 pr_debug("%s: cpu %u cluster %u\n", __func__
, cpu
, cluster
);
249 if (WARN_ON_ONCE(!platform_ops
))
251 BUG_ON(!irqs_disabled());
253 setup_mm_for_reboot();
255 __mcpm_cpu_going_down(cpu
, cluster
);
256 arch_spin_lock(&mcpm_lock
);
257 BUG_ON(__mcpm_cluster_state(cluster
) != CLUSTER_UP
);
259 mcpm_cpu_use_count
[cluster
][cpu
]--;
260 BUG_ON(mcpm_cpu_use_count
[cluster
][cpu
] != 0 &&
261 mcpm_cpu_use_count
[cluster
][cpu
] != 1);
262 cpu_going_down
= !mcpm_cpu_use_count
[cluster
][cpu
];
263 last_man
= mcpm_cluster_unused(cluster
);
265 if (last_man
&& __mcpm_outbound_enter_critical(cpu
, cluster
)) {
266 platform_ops
->cpu_powerdown_prepare(cpu
, cluster
);
267 platform_ops
->cluster_powerdown_prepare(cluster
);
268 arch_spin_unlock(&mcpm_lock
);
269 platform_ops
->cluster_cache_disable();
270 __mcpm_outbound_leave_critical(cluster
, CLUSTER_DOWN
);
273 platform_ops
->cpu_powerdown_prepare(cpu
, cluster
);
274 arch_spin_unlock(&mcpm_lock
);
276 * If cpu_going_down is false here, that means a power_up
277 * request raced ahead of us. Even if we do not want to
278 * shut this CPU down, the caller still expects execution
279 * to return through the system resume entry path, like
280 * when the WFI is aborted due to a new IRQ or the like..
281 * So let's continue with cache cleaning in all cases.
283 platform_ops
->cpu_cache_disable();
286 __mcpm_cpu_down(cpu
, cluster
);
288 /* Now we are prepared for power-down, do it: */
293 * It is possible for a power_up request to happen concurrently
294 * with a power_down request for the same CPU. In this case the
295 * CPU might not be able to actually enter a powered down state
296 * with the WFI instruction if the power_up request has removed
297 * the required reset condition. We must perform a re-entry in
298 * the kernel as if the power_up method just had deasserted reset
301 phys_reset
= (phys_reset_t
)(unsigned long)__pa_symbol(cpu_reset
);
302 phys_reset(__pa_symbol(mcpm_entry_point
), false);
304 /* should never get here */
308 int mcpm_wait_for_cpu_powerdown(unsigned int cpu
, unsigned int cluster
)
312 if (WARN_ON_ONCE(!platform_ops
|| !platform_ops
->wait_for_powerdown
))
315 ret
= platform_ops
->wait_for_powerdown(cpu
, cluster
);
317 pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
318 __func__
, cpu
, cluster
, ret
);
323 void mcpm_cpu_suspend(void)
325 if (WARN_ON_ONCE(!platform_ops
))
328 /* Some platforms might have to enable special resume modes, etc. */
329 if (platform_ops
->cpu_suspend_prepare
) {
330 unsigned int mpidr
= read_cpuid_mpidr();
331 unsigned int cpu
= MPIDR_AFFINITY_LEVEL(mpidr
, 0);
332 unsigned int cluster
= MPIDR_AFFINITY_LEVEL(mpidr
, 1);
333 arch_spin_lock(&mcpm_lock
);
334 platform_ops
->cpu_suspend_prepare(cpu
, cluster
);
335 arch_spin_unlock(&mcpm_lock
);
337 mcpm_cpu_power_down();
340 int mcpm_cpu_powered_up(void)
342 unsigned int mpidr
, cpu
, cluster
;
343 bool cpu_was_down
, first_man
;
349 mpidr
= read_cpuid_mpidr();
350 cpu
= MPIDR_AFFINITY_LEVEL(mpidr
, 0);
351 cluster
= MPIDR_AFFINITY_LEVEL(mpidr
, 1);
352 local_irq_save(flags
);
353 arch_spin_lock(&mcpm_lock
);
355 cpu_was_down
= !mcpm_cpu_use_count
[cluster
][cpu
];
356 first_man
= mcpm_cluster_unused(cluster
);
358 if (first_man
&& platform_ops
->cluster_is_up
)
359 platform_ops
->cluster_is_up(cluster
);
361 mcpm_cpu_use_count
[cluster
][cpu
] = 1;
362 if (platform_ops
->cpu_is_up
)
363 platform_ops
->cpu_is_up(cpu
, cluster
);
365 arch_spin_unlock(&mcpm_lock
);
366 local_irq_restore(flags
);
371 #ifdef CONFIG_ARM_CPU_SUSPEND
373 static int __init
nocache_trampoline(unsigned long _arg
)
375 void (*cache_disable
)(void) = (void *)_arg
;
376 unsigned int mpidr
= read_cpuid_mpidr();
377 unsigned int cpu
= MPIDR_AFFINITY_LEVEL(mpidr
, 0);
378 unsigned int cluster
= MPIDR_AFFINITY_LEVEL(mpidr
, 1);
379 phys_reset_t phys_reset
;
381 mcpm_set_entry_vector(cpu
, cluster
, cpu_resume_no_hyp
);
382 setup_mm_for_reboot();
384 __mcpm_cpu_going_down(cpu
, cluster
);
385 BUG_ON(!__mcpm_outbound_enter_critical(cpu
, cluster
));
387 __mcpm_outbound_leave_critical(cluster
, CLUSTER_DOWN
);
388 __mcpm_cpu_down(cpu
, cluster
);
390 phys_reset
= (phys_reset_t
)(unsigned long)__pa_symbol(cpu_reset
);
391 phys_reset(__pa_symbol(mcpm_entry_point
), false);
395 int __init
mcpm_loopback(void (*cache_disable
)(void))
400 * We're going to soft-restart the current CPU through the
401 * low-level MCPM code by leveraging the suspend/resume
402 * infrastructure. Let's play it safe by using cpu_pm_enter()
403 * in case the CPU init code path resets the VFP or similar.
407 ret
= cpu_pm_enter();
409 ret
= cpu_suspend((unsigned long)cache_disable
, nocache_trampoline
);
415 pr_err("%s returned %d\n", __func__
, ret
);
421 extern unsigned long mcpm_power_up_setup_phys
;
423 int __init
mcpm_sync_init(
424 void (*power_up_setup
)(unsigned int affinity_level
))
426 unsigned int i
, j
, mpidr
, this_cluster
;
428 BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE
* MAX_NR_CLUSTERS
!= sizeof mcpm_sync
);
429 BUG_ON((unsigned long)&mcpm_sync
& (__CACHE_WRITEBACK_GRANULE
- 1));
432 * Set initial CPU and cluster states.
433 * Only one cluster is assumed to be active at this point.
435 for (i
= 0; i
< MAX_NR_CLUSTERS
; i
++) {
436 mcpm_sync
.clusters
[i
].cluster
= CLUSTER_DOWN
;
437 mcpm_sync
.clusters
[i
].inbound
= INBOUND_NOT_COMING_UP
;
438 for (j
= 0; j
< MAX_CPUS_PER_CLUSTER
; j
++)
439 mcpm_sync
.clusters
[i
].cpus
[j
].cpu
= CPU_DOWN
;
441 mpidr
= read_cpuid_mpidr();
442 this_cluster
= MPIDR_AFFINITY_LEVEL(mpidr
, 1);
443 for_each_online_cpu(i
) {
444 mcpm_cpu_use_count
[this_cluster
][i
] = 1;
445 mcpm_sync
.clusters
[this_cluster
].cpus
[i
].cpu
= CPU_UP
;
447 mcpm_sync
.clusters
[this_cluster
].cluster
= CLUSTER_UP
;
448 sync_cache_w(&mcpm_sync
);
450 if (power_up_setup
) {
451 mcpm_power_up_setup_phys
= __pa_symbol(power_up_setup
);
452 sync_cache_w(&mcpm_power_up_setup_phys
);