Linux 5.7.7
[linux/fpc-iii.git] / arch / arm / mach-imx / pm-imx5.c
blobe9962b48e30cbd2db797cf9bb452b452ca93dfe3
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
4 */
5 #include <linux/suspend.h>
6 #include <linux/clk.h>
7 #include <linux/io.h>
8 #include <linux/err.h>
9 #include <linux/export.h>
11 #include <linux/genalloc.h>
12 #include <linux/of.h>
13 #include <linux/of_address.h>
14 #include <linux/of_platform.h>
16 #include <asm/cacheflush.h>
17 #include <asm/fncpy.h>
18 #include <asm/system_misc.h>
19 #include <asm/tlbflush.h>
21 #include "common.h"
22 #include "cpuidle.h"
23 #include "hardware.h"
25 #define MXC_CCM_CLPCR 0x54
26 #define MXC_CCM_CLPCR_LPM_OFFSET 0
27 #define MXC_CCM_CLPCR_LPM_MASK 0x3
28 #define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9
29 #define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
30 #define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
32 #define MXC_CORTEXA8_PLAT_LPC 0xc
33 #define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
34 #define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
36 #define MXC_SRPG_NEON_SRPGCR 0x280
37 #define MXC_SRPG_ARM_SRPGCR 0x2a0
38 #define MXC_SRPG_EMPGC0_SRPGCR 0x2c0
39 #define MXC_SRPG_EMPGC1_SRPGCR 0x2d0
41 #define MXC_SRPGCR_PCR 1
44 * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
45 * This is also the lowest power state possible without affecting
46 * non-cpu parts of the system. For these reasons, imx5 should default
47 * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also
48 * uses this state and needs to take no action when registers remain confgiured
49 * for this state.
51 #define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
53 struct imx5_suspend_io_state {
54 u32 offset;
55 u32 clear;
56 u32 set;
57 u32 saved_value;
60 struct imx5_pm_data {
61 phys_addr_t ccm_addr;
62 phys_addr_t cortex_addr;
63 phys_addr_t gpc_addr;
64 phys_addr_t m4if_addr;
65 phys_addr_t iomuxc_addr;
66 void (*suspend_asm)(void __iomem *ocram_vbase);
67 const u32 *suspend_asm_sz;
68 const struct imx5_suspend_io_state *suspend_io_config;
69 int suspend_io_count;
72 static const struct imx5_suspend_io_state imx53_suspend_io_config[] = {
73 #define MX53_DSE_HIGHZ_MASK (0x7 << 19)
74 {.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */
75 {.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */
76 {.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */
77 {.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */
78 {.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */
79 {.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */
80 {.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */
81 {.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */
83 {.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */
84 {.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */
85 {.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */
86 {.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */
87 {.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */
88 {.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */
89 {.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */
90 {.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */
91 {.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */
92 {.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */
93 {.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */
95 /* Controls the CKE signal which is required to leave self refresh */
96 {.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */
99 static const struct imx5_pm_data imx51_pm_data __initconst = {
100 .ccm_addr = 0x73fd4000,
101 .cortex_addr = 0x83fa0000,
102 .gpc_addr = 0x73fd8000,
105 static const struct imx5_pm_data imx53_pm_data __initconst = {
106 .ccm_addr = 0x53fd4000,
107 .cortex_addr = 0x63fa0000,
108 .gpc_addr = 0x53fd8000,
109 .m4if_addr = 0x63fd8000,
110 .iomuxc_addr = 0x53fa8000,
111 .suspend_asm = &imx53_suspend,
112 .suspend_asm_sz = &imx53_suspend_sz,
113 .suspend_io_config = imx53_suspend_io_config,
114 .suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config),
117 #define MX5_MAX_SUSPEND_IOSTATE ARRAY_SIZE(imx53_suspend_io_config)
120 * This structure is for passing necessary data for low level ocram
121 * suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct
122 * definition is changed, the offset definition in that file
123 * must be also changed accordingly otherwise, the suspend to ocram
124 * function will be broken!
126 struct imx5_cpu_suspend_info {
127 void __iomem *m4if_base;
128 void __iomem *iomuxc_base;
129 u32 io_count;
130 struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOSTATE];
131 } __aligned(8);
133 static void __iomem *ccm_base;
134 static void __iomem *cortex_base;
135 static void __iomem *gpc_base;
136 static void __iomem *suspend_ocram_base;
137 static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
140 * set cpu low power mode before WFI instruction. This function is called
141 * mx5 because it can be used for mx51, and mx53.
143 static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
145 u32 plat_lpc, arm_srpgcr, ccm_clpcr;
146 u32 empgc0, empgc1;
147 int stop_mode = 0;
149 /* always allow platform to issue a deep sleep mode request */
150 plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
151 ~(MXC_CORTEXA8_PLAT_LPC_DSM);
152 ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) &
153 ~(MXC_CCM_CLPCR_LPM_MASK);
154 arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
155 ~(MXC_SRPGCR_PCR);
156 empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
157 ~(MXC_SRPGCR_PCR);
158 empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
159 ~(MXC_SRPGCR_PCR);
161 switch (mode) {
162 case WAIT_CLOCKED:
163 break;
164 case WAIT_UNCLOCKED:
165 ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
166 break;
167 case WAIT_UNCLOCKED_POWER_OFF:
168 case STOP_POWER_OFF:
169 plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
170 | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
171 if (mode == WAIT_UNCLOCKED_POWER_OFF) {
172 ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
173 ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
174 ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
175 stop_mode = 0;
176 } else {
177 ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
178 ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
179 ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
180 ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
181 stop_mode = 1;
183 arm_srpgcr |= MXC_SRPGCR_PCR;
184 break;
185 case STOP_POWER_ON:
186 ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
187 break;
188 default:
189 printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
190 return;
193 imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
194 imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
195 imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
196 imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
198 if (stop_mode) {
199 empgc0 |= MXC_SRPGCR_PCR;
200 empgc1 |= MXC_SRPGCR_PCR;
202 imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
203 imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
207 static int mx5_suspend_enter(suspend_state_t state)
209 switch (state) {
210 case PM_SUSPEND_MEM:
211 mx5_cpu_lp_set(STOP_POWER_OFF);
212 break;
213 case PM_SUSPEND_STANDBY:
214 /* DEFAULT_IDLE_STATE already configured */
215 break;
216 default:
217 return -EINVAL;
220 if (state == PM_SUSPEND_MEM) {
221 local_flush_tlb_all();
222 flush_cache_all();
224 /*clear the EMPGC0/1 bits */
225 imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
226 imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
228 if (imx5_suspend_in_ocram_fn)
229 imx5_suspend_in_ocram_fn(suspend_ocram_base);
230 else
231 cpu_do_idle();
233 } else {
234 cpu_do_idle();
237 /* return registers to default idle state */
238 mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
239 return 0;
242 static int mx5_pm_valid(suspend_state_t state)
244 return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
247 static const struct platform_suspend_ops mx5_suspend_ops = {
248 .valid = mx5_pm_valid,
249 .enter = mx5_suspend_enter,
252 static inline int imx5_cpu_do_idle(void)
254 int ret = tzic_enable_wake();
256 if (likely(!ret))
257 cpu_do_idle();
259 return ret;
262 static void imx5_pm_idle(void)
264 imx5_cpu_do_idle();
267 static int __init imx_suspend_alloc_ocram(
268 size_t size,
269 void __iomem **virt_out,
270 phys_addr_t *phys_out)
272 struct device_node *node;
273 struct platform_device *pdev;
274 struct gen_pool *ocram_pool;
275 unsigned long ocram_base;
276 void __iomem *virt;
277 phys_addr_t phys;
278 int ret = 0;
280 /* Copied from imx6: TODO factorize */
281 node = of_find_compatible_node(NULL, NULL, "mmio-sram");
282 if (!node) {
283 pr_warn("%s: failed to find ocram node!\n", __func__);
284 return -ENODEV;
287 pdev = of_find_device_by_node(node);
288 if (!pdev) {
289 pr_warn("%s: failed to find ocram device!\n", __func__);
290 ret = -ENODEV;
291 goto put_node;
294 ocram_pool = gen_pool_get(&pdev->dev, NULL);
295 if (!ocram_pool) {
296 pr_warn("%s: ocram pool unavailable!\n", __func__);
297 ret = -ENODEV;
298 goto put_device;
301 ocram_base = gen_pool_alloc(ocram_pool, size);
302 if (!ocram_base) {
303 pr_warn("%s: unable to alloc ocram!\n", __func__);
304 ret = -ENOMEM;
305 goto put_device;
308 phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
309 virt = __arm_ioremap_exec(phys, size, false);
310 if (phys_out)
311 *phys_out = phys;
312 if (virt_out)
313 *virt_out = virt;
315 put_device:
316 put_device(&pdev->dev);
317 put_node:
318 of_node_put(node);
320 return ret;
323 static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data)
325 struct imx5_cpu_suspend_info *suspend_info;
326 int ret;
327 /* Need this to avoid compile error due to const typeof in fncpy.h */
328 void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm;
330 if (!suspend_asm)
331 return 0;
333 if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz)
334 return -EINVAL;
336 ret = imx_suspend_alloc_ocram(
337 *soc_data->suspend_asm_sz + sizeof(*suspend_info),
338 &suspend_ocram_base, NULL);
339 if (ret)
340 return ret;
342 suspend_info = suspend_ocram_base;
344 suspend_info->io_count = soc_data->suspend_io_count;
345 memcpy(suspend_info->io_state, soc_data->suspend_io_config,
346 sizeof(*suspend_info->io_state) * soc_data->suspend_io_count);
348 suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K);
349 if (!suspend_info->m4if_base) {
350 ret = -ENOMEM;
351 goto failed_map_m4if;
354 suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K);
355 if (!suspend_info->iomuxc_base) {
356 ret = -ENOMEM;
357 goto failed_map_iomuxc;
360 imx5_suspend_in_ocram_fn = fncpy(
361 suspend_ocram_base + sizeof(*suspend_info),
362 suspend_asm,
363 *soc_data->suspend_asm_sz);
365 return 0;
367 failed_map_iomuxc:
368 iounmap(suspend_info->m4if_base);
370 failed_map_m4if:
371 return ret;
374 static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
376 int ret;
377 struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
379 if (IS_ERR(gpc_dvfs_clk))
380 return PTR_ERR(gpc_dvfs_clk);
382 ret = clk_prepare_enable(gpc_dvfs_clk);
383 if (ret)
384 return ret;
386 arm_pm_idle = imx5_pm_idle;
388 ccm_base = ioremap(data->ccm_addr, SZ_16K);
389 cortex_base = ioremap(data->cortex_addr, SZ_16K);
390 gpc_base = ioremap(data->gpc_addr, SZ_16K);
391 WARN_ON(!ccm_base || !cortex_base || !gpc_base);
393 /* Set the registers to the default cpu idle state. */
394 mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
396 ret = imx5_cpuidle_init();
397 if (ret)
398 pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
400 ret = imx5_suspend_init(data);
401 if (ret)
402 pr_warn("%s: No DDR LPM support with suspend %d!\n",
403 __func__, ret);
405 suspend_set_ops(&mx5_suspend_ops);
407 return 0;
410 void __init imx51_pm_init(void)
412 if (IS_ENABLED(CONFIG_SOC_IMX51))
413 imx5_pm_common_init(&imx51_pm_data);
416 void __init imx53_pm_init(void)
418 if (IS_ENABLED(CONFIG_SOC_IMX53))
419 imx5_pm_common_init(&imx53_pm_data);