1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * An implementation of the DCCP protocol
6 * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
9 #include <linux/dccp.h>
10 #include <linux/skbuff.h>
11 #include <linux/slab.h>
19 /* rate-limit for syncs in reply to sequence-invalid packets; RFC 4340, 7.5.4 */
20 int sysctl_dccp_sync_ratelimit __read_mostly
= HZ
/ 8;
22 static void dccp_enqueue_skb(struct sock
*sk
, struct sk_buff
*skb
)
24 __skb_pull(skb
, dccp_hdr(skb
)->dccph_doff
* 4);
25 __skb_queue_tail(&sk
->sk_receive_queue
, skb
);
26 skb_set_owner_r(skb
, sk
);
27 sk
->sk_data_ready(sk
);
30 static void dccp_fin(struct sock
*sk
, struct sk_buff
*skb
)
33 * On receiving Close/CloseReq, both RD/WR shutdown are performed.
34 * RFC 4340, 8.3 says that we MAY send further Data/DataAcks after
35 * receiving the closing segment, but there is no guarantee that such
36 * data will be processed at all.
38 sk
->sk_shutdown
= SHUTDOWN_MASK
;
39 sock_set_flag(sk
, SOCK_DONE
);
40 dccp_enqueue_skb(sk
, skb
);
43 static int dccp_rcv_close(struct sock
*sk
, struct sk_buff
*skb
)
47 switch (sk
->sk_state
) {
49 * We ignore Close when received in one of the following states:
50 * - CLOSED (may be a late or duplicate packet)
51 * - PASSIVE_CLOSEREQ (the peer has sent a CloseReq earlier)
52 * - RESPOND (already handled by dccp_check_req)
56 * Simultaneous-close: receiving a Close after sending one. This
57 * can happen if both client and server perform active-close and
58 * will result in an endless ping-pong of crossing and retrans-
59 * mitted Close packets, which only terminates when one of the
60 * nodes times out (min. 64 seconds). Quicker convergence can be
61 * achieved when one of the nodes acts as tie-breaker.
62 * This is ok as both ends are done with data transfer and each
63 * end is just waiting for the other to acknowledge termination.
65 if (dccp_sk(sk
)->dccps_role
!= DCCP_ROLE_CLIENT
)
69 case DCCP_ACTIVE_CLOSEREQ
:
70 dccp_send_reset(sk
, DCCP_RESET_CODE_CLOSED
);
75 /* Give waiting application a chance to read pending data */
78 dccp_set_state(sk
, DCCP_PASSIVE_CLOSE
);
80 case DCCP_PASSIVE_CLOSE
:
82 * Retransmitted Close: we have already enqueued the first one.
84 sk_wake_async(sk
, SOCK_WAKE_WAITD
, POLL_HUP
);
89 static int dccp_rcv_closereq(struct sock
*sk
, struct sk_buff
*skb
)
94 * Step 7: Check for unexpected packet types
95 * If (S.is_server and P.type == CloseReq)
96 * Send Sync packet acknowledging P.seqno
97 * Drop packet and return
99 if (dccp_sk(sk
)->dccps_role
!= DCCP_ROLE_CLIENT
) {
100 dccp_send_sync(sk
, DCCP_SKB_CB(skb
)->dccpd_seq
, DCCP_PKT_SYNC
);
104 /* Step 13: process relevant Client states < CLOSEREQ */
105 switch (sk
->sk_state
) {
106 case DCCP_REQUESTING
:
107 dccp_send_close(sk
, 0);
108 dccp_set_state(sk
, DCCP_CLOSING
);
112 /* Give waiting application a chance to read pending data */
115 dccp_set_state(sk
, DCCP_PASSIVE_CLOSEREQ
);
117 case DCCP_PASSIVE_CLOSEREQ
:
118 sk_wake_async(sk
, SOCK_WAKE_WAITD
, POLL_HUP
);
123 static u16
dccp_reset_code_convert(const u8 code
)
125 static const u16 error_code
[] = {
126 [DCCP_RESET_CODE_CLOSED
] = 0, /* normal termination */
127 [DCCP_RESET_CODE_UNSPECIFIED
] = 0, /* nothing known */
128 [DCCP_RESET_CODE_ABORTED
] = ECONNRESET
,
130 [DCCP_RESET_CODE_NO_CONNECTION
] = ECONNREFUSED
,
131 [DCCP_RESET_CODE_CONNECTION_REFUSED
] = ECONNREFUSED
,
132 [DCCP_RESET_CODE_TOO_BUSY
] = EUSERS
,
133 [DCCP_RESET_CODE_AGGRESSION_PENALTY
] = EDQUOT
,
135 [DCCP_RESET_CODE_PACKET_ERROR
] = ENOMSG
,
136 [DCCP_RESET_CODE_BAD_INIT_COOKIE
] = EBADR
,
137 [DCCP_RESET_CODE_BAD_SERVICE_CODE
] = EBADRQC
,
138 [DCCP_RESET_CODE_OPTION_ERROR
] = EILSEQ
,
139 [DCCP_RESET_CODE_MANDATORY_ERROR
] = EOPNOTSUPP
,
142 return code
>= DCCP_MAX_RESET_CODES
? 0 : error_code
[code
];
145 static void dccp_rcv_reset(struct sock
*sk
, struct sk_buff
*skb
)
147 u16 err
= dccp_reset_code_convert(dccp_hdr_reset(skb
)->dccph_reset_code
);
151 /* Queue the equivalent of TCP fin so that dccp_recvmsg exits the loop */
154 if (err
&& !sock_flag(sk
, SOCK_DEAD
))
155 sk_wake_async(sk
, SOCK_WAKE_IO
, POLL_ERR
);
156 dccp_time_wait(sk
, DCCP_TIME_WAIT
, 0);
159 static void dccp_handle_ackvec_processing(struct sock
*sk
, struct sk_buff
*skb
)
161 struct dccp_ackvec
*av
= dccp_sk(sk
)->dccps_hc_rx_ackvec
;
165 if (DCCP_SKB_CB(skb
)->dccpd_ack_seq
!= DCCP_PKT_WITHOUT_ACK_SEQ
)
166 dccp_ackvec_clear_state(av
, DCCP_SKB_CB(skb
)->dccpd_ack_seq
);
167 dccp_ackvec_input(av
, skb
);
170 static void dccp_deliver_input_to_ccids(struct sock
*sk
, struct sk_buff
*skb
)
172 const struct dccp_sock
*dp
= dccp_sk(sk
);
174 /* Don't deliver to RX CCID when node has shut down read end. */
175 if (!(sk
->sk_shutdown
& RCV_SHUTDOWN
))
176 ccid_hc_rx_packet_recv(dp
->dccps_hc_rx_ccid
, sk
, skb
);
178 * Until the TX queue has been drained, we can not honour SHUT_WR, since
179 * we need received feedback as input to adjust congestion control.
181 if (sk
->sk_write_queue
.qlen
> 0 || !(sk
->sk_shutdown
& SEND_SHUTDOWN
))
182 ccid_hc_tx_packet_recv(dp
->dccps_hc_tx_ccid
, sk
, skb
);
185 static int dccp_check_seqno(struct sock
*sk
, struct sk_buff
*skb
)
187 const struct dccp_hdr
*dh
= dccp_hdr(skb
);
188 struct dccp_sock
*dp
= dccp_sk(sk
);
189 u64 lswl
, lawl
, seqno
= DCCP_SKB_CB(skb
)->dccpd_seq
,
190 ackno
= DCCP_SKB_CB(skb
)->dccpd_ack_seq
;
193 * Step 5: Prepare sequence numbers for Sync
194 * If P.type == Sync or P.type == SyncAck,
195 * If S.AWL <= P.ackno <= S.AWH and P.seqno >= S.SWL,
196 * / * P is valid, so update sequence number variables
197 * accordingly. After this update, P will pass the tests
198 * in Step 6. A SyncAck is generated if necessary in
200 * Update S.GSR, S.SWL, S.SWH
202 * Drop packet and return
204 if (dh
->dccph_type
== DCCP_PKT_SYNC
||
205 dh
->dccph_type
== DCCP_PKT_SYNCACK
) {
206 if (between48(ackno
, dp
->dccps_awl
, dp
->dccps_awh
) &&
207 dccp_delta_seqno(dp
->dccps_swl
, seqno
) >= 0)
208 dccp_update_gsr(sk
, seqno
);
214 * Step 6: Check sequence numbers
215 * Let LSWL = S.SWL and LAWL = S.AWL
216 * If P.type == CloseReq or P.type == Close or P.type == Reset,
217 * LSWL := S.GSR + 1, LAWL := S.GAR
218 * If LSWL <= P.seqno <= S.SWH
219 * and (P.ackno does not exist or LAWL <= P.ackno <= S.AWH),
220 * Update S.GSR, S.SWL, S.SWH
224 lswl
= dp
->dccps_swl
;
225 lawl
= dp
->dccps_awl
;
227 if (dh
->dccph_type
== DCCP_PKT_CLOSEREQ
||
228 dh
->dccph_type
== DCCP_PKT_CLOSE
||
229 dh
->dccph_type
== DCCP_PKT_RESET
) {
230 lswl
= ADD48(dp
->dccps_gsr
, 1);
231 lawl
= dp
->dccps_gar
;
234 if (between48(seqno
, lswl
, dp
->dccps_swh
) &&
235 (ackno
== DCCP_PKT_WITHOUT_ACK_SEQ
||
236 between48(ackno
, lawl
, dp
->dccps_awh
))) {
237 dccp_update_gsr(sk
, seqno
);
239 if (dh
->dccph_type
!= DCCP_PKT_SYNC
&&
240 ackno
!= DCCP_PKT_WITHOUT_ACK_SEQ
&&
241 after48(ackno
, dp
->dccps_gar
))
242 dp
->dccps_gar
= ackno
;
244 unsigned long now
= jiffies
;
246 * Step 6: Check sequence numbers
248 * If P.type == Reset,
249 * Send Sync packet acknowledging S.GSR
251 * Send Sync packet acknowledging P.seqno
252 * Drop packet and return
254 * These Syncs are rate-limited as per RFC 4340, 7.5.4:
255 * at most 1 / (dccp_sync_rate_limit * HZ) Syncs per second.
257 if (time_before(now
, (dp
->dccps_rate_last
+
258 sysctl_dccp_sync_ratelimit
)))
261 DCCP_WARN("Step 6 failed for %s packet, "
262 "(LSWL(%llu) <= P.seqno(%llu) <= S.SWH(%llu)) and "
263 "(P.ackno %s or LAWL(%llu) <= P.ackno(%llu) <= S.AWH(%llu), "
264 "sending SYNC...\n", dccp_packet_name(dh
->dccph_type
),
265 (unsigned long long) lswl
, (unsigned long long) seqno
,
266 (unsigned long long) dp
->dccps_swh
,
267 (ackno
== DCCP_PKT_WITHOUT_ACK_SEQ
) ? "doesn't exist"
269 (unsigned long long) lawl
, (unsigned long long) ackno
,
270 (unsigned long long) dp
->dccps_awh
);
272 dp
->dccps_rate_last
= now
;
274 if (dh
->dccph_type
== DCCP_PKT_RESET
)
275 seqno
= dp
->dccps_gsr
;
276 dccp_send_sync(sk
, seqno
, DCCP_PKT_SYNC
);
283 static int __dccp_rcv_established(struct sock
*sk
, struct sk_buff
*skb
,
284 const struct dccp_hdr
*dh
, const unsigned int len
)
286 struct dccp_sock
*dp
= dccp_sk(sk
);
288 switch (dccp_hdr(skb
)->dccph_type
) {
289 case DCCP_PKT_DATAACK
:
292 * FIXME: schedule DATA_DROPPED (RFC 4340, 11.7.2) if and when
293 * - sk_shutdown == RCV_SHUTDOWN, use Code 1, "Not Listening"
294 * - sk_receive_queue is full, use Code 2, "Receive Buffer"
296 dccp_enqueue_skb(sk
, skb
);
302 * Step 9: Process Reset
303 * If P.type == Reset,
304 * Tear down connection
305 * S.state := TIMEWAIT
307 * Drop packet and return
309 dccp_rcv_reset(sk
, skb
);
311 case DCCP_PKT_CLOSEREQ
:
312 if (dccp_rcv_closereq(sk
, skb
))
316 if (dccp_rcv_close(sk
, skb
))
319 case DCCP_PKT_REQUEST
:
321 * or (S.is_server and P.type == Response)
322 * or (S.is_client and P.type == Request)
323 * or (S.state >= OPEN and P.type == Request
324 * and P.seqno >= S.OSR)
325 * or (S.state >= OPEN and P.type == Response
326 * and P.seqno >= S.OSR)
327 * or (S.state == RESPOND and P.type == Data),
328 * Send Sync packet acknowledging P.seqno
329 * Drop packet and return
331 if (dp
->dccps_role
!= DCCP_ROLE_LISTEN
)
334 case DCCP_PKT_RESPONSE
:
335 if (dp
->dccps_role
!= DCCP_ROLE_CLIENT
)
338 if (dccp_delta_seqno(dp
->dccps_osr
,
339 DCCP_SKB_CB(skb
)->dccpd_seq
) >= 0) {
341 dccp_send_sync(sk
, DCCP_SKB_CB(skb
)->dccpd_seq
,
346 dccp_send_sync(sk
, DCCP_SKB_CB(skb
)->dccpd_seq
,
349 * From RFC 4340, sec. 5.7
351 * As with DCCP-Ack packets, DCCP-Sync and DCCP-SyncAck packets
352 * MAY have non-zero-length application data areas, whose
353 * contents receivers MUST ignore.
358 DCCP_INC_STATS(DCCP_MIB_INERRS
);
364 int dccp_rcv_established(struct sock
*sk
, struct sk_buff
*skb
,
365 const struct dccp_hdr
*dh
, const unsigned int len
)
367 if (dccp_check_seqno(sk
, skb
))
370 if (dccp_parse_options(sk
, NULL
, skb
))
373 dccp_handle_ackvec_processing(sk
, skb
);
374 dccp_deliver_input_to_ccids(sk
, skb
);
376 return __dccp_rcv_established(sk
, skb
, dh
, len
);
382 EXPORT_SYMBOL_GPL(dccp_rcv_established
);
384 static int dccp_rcv_request_sent_state_process(struct sock
*sk
,
386 const struct dccp_hdr
*dh
,
387 const unsigned int len
)
390 * Step 4: Prepare sequence numbers in REQUEST
391 * If S.state == REQUEST,
392 * If (P.type == Response or P.type == Reset)
393 * and S.AWL <= P.ackno <= S.AWH,
394 * / * Set sequence number variables corresponding to the
395 * other endpoint, so P will pass the tests in Step 6 * /
396 * Set S.GSR, S.ISR, S.SWL, S.SWH
397 * / * Response processing continues in Step 10; Reset
398 * processing continues in Step 9 * /
400 if (dh
->dccph_type
== DCCP_PKT_RESPONSE
) {
401 const struct inet_connection_sock
*icsk
= inet_csk(sk
);
402 struct dccp_sock
*dp
= dccp_sk(sk
);
403 long tstamp
= dccp_timestamp();
405 if (!between48(DCCP_SKB_CB(skb
)->dccpd_ack_seq
,
406 dp
->dccps_awl
, dp
->dccps_awh
)) {
407 dccp_pr_debug("invalid ackno: S.AWL=%llu, "
408 "P.ackno=%llu, S.AWH=%llu\n",
409 (unsigned long long)dp
->dccps_awl
,
410 (unsigned long long)DCCP_SKB_CB(skb
)->dccpd_ack_seq
,
411 (unsigned long long)dp
->dccps_awh
);
412 goto out_invalid_packet
;
416 * If option processing (Step 8) failed, return 1 here so that
417 * dccp_v4_do_rcv() sends a Reset. The Reset code depends on
418 * the option type and is set in dccp_parse_options().
420 if (dccp_parse_options(sk
, NULL
, skb
))
423 /* Obtain usec RTT sample from SYN exchange (used by TFRC). */
424 if (likely(dp
->dccps_options_received
.dccpor_timestamp_echo
))
425 dp
->dccps_syn_rtt
= dccp_sample_rtt(sk
, 10 * (tstamp
-
426 dp
->dccps_options_received
.dccpor_timestamp_echo
));
428 /* Stop the REQUEST timer */
429 inet_csk_clear_xmit_timer(sk
, ICSK_TIME_RETRANS
);
430 WARN_ON(sk
->sk_send_head
== NULL
);
431 kfree_skb(sk
->sk_send_head
);
432 sk
->sk_send_head
= NULL
;
435 * Set ISR, GSR from packet. ISS was set in dccp_v{4,6}_connect
436 * and GSS in dccp_transmit_skb(). Setting AWL/AWH and SWL/SWH
437 * is done as part of activating the feature values below, since
438 * these settings depend on the local/remote Sequence Window
439 * features, which were undefined or not confirmed until now.
441 dp
->dccps_gsr
= dp
->dccps_isr
= DCCP_SKB_CB(skb
)->dccpd_seq
;
443 dccp_sync_mss(sk
, icsk
->icsk_pmtu_cookie
);
446 * Step 10: Process REQUEST state (second part)
447 * If S.state == REQUEST,
448 * / * If we get here, P is a valid Response from the
449 * server (see Step 4), and we should move to
450 * PARTOPEN state. PARTOPEN means send an Ack,
451 * don't send Data packets, retransmit Acks
452 * periodically, and always include any Init Cookie
453 * from the Response * /
454 * S.state := PARTOPEN
456 * Continue with S.state == PARTOPEN
457 * / * Step 12 will send the Ack completing the
458 * three-way handshake * /
460 dccp_set_state(sk
, DCCP_PARTOPEN
);
463 * If feature negotiation was successful, activate features now;
464 * an activation failure means that this host could not activate
465 * one ore more features (e.g. insufficient memory), which would
466 * leave at least one feature in an undefined state.
468 if (dccp_feat_activate_values(sk
, &dp
->dccps_featneg
))
469 goto unable_to_proceed
;
471 /* Make sure socket is routed, for correct metrics. */
472 icsk
->icsk_af_ops
->rebuild_header(sk
);
474 if (!sock_flag(sk
, SOCK_DEAD
)) {
475 sk
->sk_state_change(sk
);
476 sk_wake_async(sk
, SOCK_WAKE_IO
, POLL_OUT
);
479 if (sk
->sk_write_pending
|| inet_csk_in_pingpong_mode(sk
) ||
480 icsk
->icsk_accept_queue
.rskq_defer_accept
) {
481 /* Save one ACK. Data will be ready after
482 * several ticks, if write_pending is set.
484 * It may be deleted, but with this feature tcpdumps
485 * look so _wonderfully_ clever, that I was not able
486 * to stand against the temptation 8) --ANK
489 * OK, in DCCP we can as well do a similar trick, its
490 * even in the draft, but there is no need for us to
491 * schedule an ack here, as dccp_sendmsg does this for
492 * us, also stated in the draft. -acme
502 /* dccp_v4_do_rcv will send a reset */
503 DCCP_SKB_CB(skb
)->dccpd_reset_code
= DCCP_RESET_CODE_PACKET_ERROR
;
507 DCCP_SKB_CB(skb
)->dccpd_reset_code
= DCCP_RESET_CODE_ABORTED
;
509 * We mark this socket as no longer usable, so that the loop in
510 * dccp_sendmsg() terminates and the application gets notified.
512 dccp_set_state(sk
, DCCP_CLOSED
);
517 static int dccp_rcv_respond_partopen_state_process(struct sock
*sk
,
519 const struct dccp_hdr
*dh
,
520 const unsigned int len
)
522 struct dccp_sock
*dp
= dccp_sk(sk
);
523 u32 sample
= dp
->dccps_options_received
.dccpor_timestamp_echo
;
526 switch (dh
->dccph_type
) {
528 inet_csk_clear_xmit_timer(sk
, ICSK_TIME_DACK
);
531 if (sk
->sk_state
== DCCP_RESPOND
)
534 case DCCP_PKT_DATAACK
:
537 * FIXME: we should be resetting the PARTOPEN (DELACK) timer
538 * here but only if we haven't used the DELACK timer for
539 * something else, like sending a delayed ack for a TIMESTAMP
540 * echo, etc, for now were not clearing it, sending an extra
541 * ACK when there is nothing else to do in DELACK is not a big
545 /* Stop the PARTOPEN timer */
546 if (sk
->sk_state
== DCCP_PARTOPEN
)
547 inet_csk_clear_xmit_timer(sk
, ICSK_TIME_DACK
);
549 /* Obtain usec RTT sample from SYN exchange (used by TFRC). */
550 if (likely(sample
)) {
551 long delta
= dccp_timestamp() - sample
;
553 dp
->dccps_syn_rtt
= dccp_sample_rtt(sk
, 10 * delta
);
556 dp
->dccps_osr
= DCCP_SKB_CB(skb
)->dccpd_seq
;
557 dccp_set_state(sk
, DCCP_OPEN
);
559 if (dh
->dccph_type
== DCCP_PKT_DATAACK
||
560 dh
->dccph_type
== DCCP_PKT_DATA
) {
561 __dccp_rcv_established(sk
, skb
, dh
, len
);
562 queued
= 1; /* packet was queued
563 (by __dccp_rcv_established) */
571 int dccp_rcv_state_process(struct sock
*sk
, struct sk_buff
*skb
,
572 struct dccp_hdr
*dh
, unsigned int len
)
574 struct dccp_sock
*dp
= dccp_sk(sk
);
575 struct dccp_skb_cb
*dcb
= DCCP_SKB_CB(skb
);
576 const int old_state
= sk
->sk_state
;
581 * Step 3: Process LISTEN state
583 * If S.state == LISTEN,
584 * If P.type == Request or P contains a valid Init Cookie option,
585 * (* Must scan the packet's options to check for Init
586 * Cookies. Only Init Cookies are processed here,
587 * however; other options are processed in Step 8. This
588 * scan need only be performed if the endpoint uses Init
590 * (* Generate a new socket and switch to that socket *)
591 * Set S := new socket for this port pair
593 * Choose S.ISS (initial seqno) or set from Init Cookies
594 * Initialize S.GAR := S.ISS
595 * Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init
596 * Cookies Continue with S.state == RESPOND
597 * (* A Response packet will be generated in Step 11 *)
599 * Generate Reset(No Connection) unless P.type == Reset
600 * Drop packet and return
602 if (sk
->sk_state
== DCCP_LISTEN
) {
603 if (dh
->dccph_type
== DCCP_PKT_REQUEST
) {
604 /* It is possible that we process SYN packets from backlog,
605 * so we need to make sure to disable BH and RCU right there.
609 acceptable
= inet_csk(sk
)->icsk_af_ops
->conn_request(sk
, skb
) >= 0;
617 if (dh
->dccph_type
== DCCP_PKT_RESET
)
620 /* Caller (dccp_v4_do_rcv) will send Reset */
621 dcb
->dccpd_reset_code
= DCCP_RESET_CODE_NO_CONNECTION
;
623 } else if (sk
->sk_state
== DCCP_CLOSED
) {
624 dcb
->dccpd_reset_code
= DCCP_RESET_CODE_NO_CONNECTION
;
628 /* Step 6: Check sequence numbers (omitted in LISTEN/REQUEST state) */
629 if (sk
->sk_state
!= DCCP_REQUESTING
&& dccp_check_seqno(sk
, skb
))
633 * Step 7: Check for unexpected packet types
634 * If (S.is_server and P.type == Response)
635 * or (S.is_client and P.type == Request)
636 * or (S.state == RESPOND and P.type == Data),
637 * Send Sync packet acknowledging P.seqno
638 * Drop packet and return
640 if ((dp
->dccps_role
!= DCCP_ROLE_CLIENT
&&
641 dh
->dccph_type
== DCCP_PKT_RESPONSE
) ||
642 (dp
->dccps_role
== DCCP_ROLE_CLIENT
&&
643 dh
->dccph_type
== DCCP_PKT_REQUEST
) ||
644 (sk
->sk_state
== DCCP_RESPOND
&& dh
->dccph_type
== DCCP_PKT_DATA
)) {
645 dccp_send_sync(sk
, dcb
->dccpd_seq
, DCCP_PKT_SYNC
);
649 /* Step 8: Process options */
650 if (dccp_parse_options(sk
, NULL
, skb
))
654 * Step 9: Process Reset
655 * If P.type == Reset,
656 * Tear down connection
657 * S.state := TIMEWAIT
659 * Drop packet and return
661 if (dh
->dccph_type
== DCCP_PKT_RESET
) {
662 dccp_rcv_reset(sk
, skb
);
664 } else if (dh
->dccph_type
== DCCP_PKT_CLOSEREQ
) { /* Step 13 */
665 if (dccp_rcv_closereq(sk
, skb
))
668 } else if (dh
->dccph_type
== DCCP_PKT_CLOSE
) { /* Step 14 */
669 if (dccp_rcv_close(sk
, skb
))
674 switch (sk
->sk_state
) {
675 case DCCP_REQUESTING
:
676 queued
= dccp_rcv_request_sent_state_process(sk
, skb
, dh
, len
);
684 /* Step 8: if using Ack Vectors, mark packet acknowledgeable */
685 dccp_handle_ackvec_processing(sk
, skb
);
686 dccp_deliver_input_to_ccids(sk
, skb
);
689 queued
= dccp_rcv_respond_partopen_state_process(sk
, skb
,
694 if (dh
->dccph_type
== DCCP_PKT_ACK
||
695 dh
->dccph_type
== DCCP_PKT_DATAACK
) {
698 sk
->sk_state_change(sk
);
699 sk_wake_async(sk
, SOCK_WAKE_IO
, POLL_OUT
);
702 } else if (unlikely(dh
->dccph_type
== DCCP_PKT_SYNC
)) {
703 dccp_send_sync(sk
, dcb
->dccpd_seq
, DCCP_PKT_SYNCACK
);
714 EXPORT_SYMBOL_GPL(dccp_rcv_state_process
);
717 * dccp_sample_rtt - Validate and finalise computation of RTT sample
718 * @delta: number of microseconds between packet and acknowledgment
720 * The routine is kept generic to work in different contexts. It should be
721 * called immediately when the ACK used for the RTT sample arrives.
723 u32
dccp_sample_rtt(struct sock
*sk
, long delta
)
725 /* dccpor_elapsed_time is either zeroed out or set and > 0 */
726 delta
-= dccp_sk(sk
)->dccps_options_received
.dccpor_elapsed_time
* 10;
728 if (unlikely(delta
<= 0)) {
729 DCCP_WARN("unusable RTT sample %ld, using min\n", delta
);
730 return DCCP_SANE_RTT_MIN
;
732 if (unlikely(delta
> DCCP_SANE_RTT_MAX
)) {
733 DCCP_WARN("RTT sample %ld too large, using max\n", delta
);
734 return DCCP_SANE_RTT_MAX
;