2 * net/tipc/msg.c: TIPC message header routines
4 * Copyright (c) 2000-2006, 2014-2015, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
41 #include "name_table.h"
44 #define MAX_FORWARD_SIZE 1024
45 #ifdef CONFIG_TIPC_CRYPTO
46 #define BUF_HEADROOM ALIGN(((LL_MAX_HEADER + 48) + EHDR_MAX_SIZE), 16)
47 #define BUF_TAILROOM (TIPC_AES_GCM_TAG_SIZE)
49 #define BUF_HEADROOM (LL_MAX_HEADER + 48)
50 #define BUF_TAILROOM 16
53 static unsigned int align(unsigned int i
)
59 * tipc_buf_acquire - creates a TIPC message buffer
60 * @size: message size (including TIPC header)
62 * Returns a new buffer with data pointers set to the specified size.
64 * NOTE: Headroom is reserved to allow prepending of a data link header.
65 * There may also be unrequested tailroom present at the buffer's end.
67 struct sk_buff
*tipc_buf_acquire(u32 size
, gfp_t gfp
)
70 #ifdef CONFIG_TIPC_CRYPTO
71 unsigned int buf_size
= (BUF_HEADROOM
+ size
+ BUF_TAILROOM
+ 3) & ~3u;
73 unsigned int buf_size
= (BUF_HEADROOM
+ size
+ 3) & ~3u;
76 skb
= alloc_skb_fclone(buf_size
, gfp
);
78 skb_reserve(skb
, BUF_HEADROOM
);
85 void tipc_msg_init(u32 own_node
, struct tipc_msg
*m
, u32 user
, u32 type
,
90 msg_set_user(m
, user
);
91 msg_set_hdr_sz(m
, hsize
);
92 msg_set_size(m
, hsize
);
93 msg_set_prevnode(m
, own_node
);
94 msg_set_type(m
, type
);
95 if (hsize
> SHORT_H_SIZE
) {
96 msg_set_orignode(m
, own_node
);
97 msg_set_destnode(m
, dnode
);
101 struct sk_buff
*tipc_msg_create(uint user
, uint type
,
102 uint hdr_sz
, uint data_sz
, u32 dnode
,
103 u32 onode
, u32 dport
, u32 oport
, int errcode
)
105 struct tipc_msg
*msg
;
108 buf
= tipc_buf_acquire(hdr_sz
+ data_sz
, GFP_ATOMIC
);
113 tipc_msg_init(onode
, msg
, user
, type
, hdr_sz
, dnode
);
114 msg_set_size(msg
, hdr_sz
+ data_sz
);
115 msg_set_origport(msg
, oport
);
116 msg_set_destport(msg
, dport
);
117 msg_set_errcode(msg
, errcode
);
118 if (hdr_sz
> SHORT_H_SIZE
) {
119 msg_set_orignode(msg
, onode
);
120 msg_set_destnode(msg
, dnode
);
125 /* tipc_buf_append(): Append a buffer to the fragment list of another buffer
126 * @*headbuf: in: NULL for first frag, otherwise value returned from prev call
127 * out: set when successful non-complete reassembly, otherwise NULL
128 * @*buf: in: the buffer to append. Always defined
129 * out: head buf after successful complete reassembly, otherwise NULL
130 * Returns 1 when reassembly complete, otherwise 0
132 int tipc_buf_append(struct sk_buff
**headbuf
, struct sk_buff
**buf
)
134 struct sk_buff
*head
= *headbuf
;
135 struct sk_buff
*frag
= *buf
;
136 struct sk_buff
*tail
= NULL
;
137 struct tipc_msg
*msg
;
146 fragid
= msg_type(msg
);
148 skb_pull(frag
, msg_hdr_sz(msg
));
150 if (fragid
== FIRST_FRAGMENT
) {
153 if (unlikely(skb_unclone(frag
, GFP_ATOMIC
)))
155 head
= *headbuf
= frag
;
157 TIPC_SKB_CB(head
)->tail
= NULL
;
158 if (skb_is_nonlinear(head
)) {
159 skb_walk_frags(head
, tail
) {
160 TIPC_SKB_CB(head
)->tail
= tail
;
163 skb_frag_list_init(head
);
171 if (skb_try_coalesce(head
, frag
, &headstolen
, &delta
)) {
172 kfree_skb_partial(frag
, headstolen
);
174 tail
= TIPC_SKB_CB(head
)->tail
;
175 if (!skb_has_frag_list(head
))
176 skb_shinfo(head
)->frag_list
= frag
;
179 head
->truesize
+= frag
->truesize
;
180 head
->data_len
+= frag
->len
;
181 head
->len
+= frag
->len
;
182 TIPC_SKB_CB(head
)->tail
= frag
;
185 if (fragid
== LAST_FRAGMENT
) {
186 TIPC_SKB_CB(head
)->validated
= 0;
187 if (unlikely(!tipc_msg_validate(&head
)))
190 TIPC_SKB_CB(head
)->tail
= NULL
;
199 *buf
= *headbuf
= NULL
;
204 * tipc_msg_append(): Append data to tail of an existing buffer queue
205 * @hdr: header to be used
206 * @m: the data to be appended
207 * @mss: max allowable size of buffer
208 * @dlen: size of data to be appended
209 * @txq: queue to appand to
210 * Returns the number og 1k blocks appended or errno value
212 int tipc_msg_append(struct tipc_msg
*_hdr
, struct msghdr
*m
, int dlen
,
213 int mss
, struct sk_buff_head
*txq
)
215 struct sk_buff
*skb
, *prev
;
216 int accounted
, total
, curr
;
217 int mlen
, cpy
, rem
= dlen
;
218 struct tipc_msg
*hdr
;
220 skb
= skb_peek_tail(txq
);
221 accounted
= skb
? msg_blocks(buf_msg(skb
)) : 0;
225 if (!skb
|| skb
->len
>= mss
) {
227 skb
= tipc_buf_acquire(mss
, GFP_KERNEL
);
231 skb_trim(skb
, MIN_H_SIZE
);
233 skb_copy_to_linear_data(skb
, _hdr
, MIN_H_SIZE
);
234 msg_set_hdr_sz(hdr
, MIN_H_SIZE
);
235 msg_set_size(hdr
, MIN_H_SIZE
);
236 __skb_queue_tail(txq
, skb
);
239 msg_set_ack_required(buf_msg(prev
), 0);
240 msg_set_ack_required(hdr
, 1);
243 curr
= msg_blocks(hdr
);
244 mlen
= msg_size(hdr
);
245 cpy
= min_t(int, rem
, mss
- mlen
);
246 if (cpy
!= copy_from_iter(skb
->data
+ mlen
, cpy
, &m
->msg_iter
))
248 msg_set_size(hdr
, mlen
+ cpy
);
251 total
+= msg_blocks(hdr
) - curr
;
253 return total
- accounted
;
256 /* tipc_msg_validate - validate basic format of received message
258 * This routine ensures a TIPC message has an acceptable header, and at least
259 * as much data as the header indicates it should. The routine also ensures
260 * that the entire message header is stored in the main fragment of the message
261 * buffer, to simplify future access to message header fields.
263 * Note: Having extra info present in the message header or data areas is OK.
264 * TIPC will ignore the excess, under the assumption that it is optional info
265 * introduced by a later release of the protocol.
267 bool tipc_msg_validate(struct sk_buff
**_skb
)
269 struct sk_buff
*skb
= *_skb
;
270 struct tipc_msg
*hdr
;
273 /* Ensure that flow control ratio condition is satisfied */
274 if (unlikely(skb
->truesize
/ buf_roundup_len(skb
) >= 4)) {
275 skb
= skb_copy_expand(skb
, BUF_HEADROOM
, 0, GFP_ATOMIC
);
282 if (unlikely(TIPC_SKB_CB(skb
)->validated
))
285 if (unlikely(!pskb_may_pull(skb
, MIN_H_SIZE
)))
288 hsz
= msg_hdr_sz(buf_msg(skb
));
289 if (unlikely(hsz
< MIN_H_SIZE
) || (hsz
> MAX_H_SIZE
))
291 if (unlikely(!pskb_may_pull(skb
, hsz
)))
295 if (unlikely(msg_version(hdr
) != TIPC_VERSION
))
299 if (unlikely(msz
< hsz
))
301 if (unlikely((msz
- hsz
) > TIPC_MAX_USER_MSG_SIZE
))
303 if (unlikely(skb
->len
< msz
))
306 TIPC_SKB_CB(skb
)->validated
= 1;
311 * tipc_msg_fragment - build a fragment skb list for TIPC message
313 * @skb: TIPC message skb
314 * @hdr: internal msg header to be put on the top of the fragments
315 * @pktmax: max size of a fragment incl. the header
316 * @frags: returned fragment skb list
318 * Returns 0 if the fragmentation is successful, otherwise: -EINVAL
321 int tipc_msg_fragment(struct sk_buff
*skb
, const struct tipc_msg
*hdr
,
322 int pktmax
, struct sk_buff_head
*frags
)
324 int pktno
, nof_fragms
, dsz
, dmax
, eat
;
325 struct tipc_msg
*_hdr
;
326 struct sk_buff
*_skb
;
329 /* Non-linear buffer? */
330 if (skb_linearize(skb
))
333 data
= (u8
*)skb
->data
;
334 dsz
= msg_size(buf_msg(skb
));
335 dmax
= pktmax
- INT_H_SIZE
;
336 if (dsz
<= dmax
|| !dmax
)
339 nof_fragms
= dsz
/ dmax
+ 1;
340 for (pktno
= 1; pktno
<= nof_fragms
; pktno
++) {
341 if (pktno
< nof_fragms
)
345 /* Allocate a new fragment */
346 _skb
= tipc_buf_acquire(INT_H_SIZE
+ eat
, GFP_ATOMIC
);
350 __skb_queue_tail(frags
, _skb
);
351 /* Copy header & data to the fragment */
352 skb_copy_to_linear_data(_skb
, hdr
, INT_H_SIZE
);
353 skb_copy_to_linear_data_offset(_skb
, INT_H_SIZE
, data
, eat
);
355 /* Update the fragment's header */
356 _hdr
= buf_msg(_skb
);
357 msg_set_fragm_no(_hdr
, pktno
);
358 msg_set_nof_fragms(_hdr
, nof_fragms
);
359 msg_set_size(_hdr
, INT_H_SIZE
+ eat
);
364 __skb_queue_purge(frags
);
365 __skb_queue_head_init(frags
);
370 * tipc_msg_build - create buffer chain containing specified header and data
371 * @mhdr: Message header, to be prepended to data
373 * @dsz: Total length of user data
374 * @pktmax: Max packet size that can be used
375 * @list: Buffer or chain of buffers to be returned to caller
377 * Note that the recursive call we are making here is safe, since it can
378 * logically go only one further level down.
380 * Returns message data size or errno: -ENOMEM, -EFAULT
382 int tipc_msg_build(struct tipc_msg
*mhdr
, struct msghdr
*m
, int offset
,
383 int dsz
, int pktmax
, struct sk_buff_head
*list
)
385 int mhsz
= msg_hdr_sz(mhdr
);
386 struct tipc_msg pkthdr
;
387 int msz
= mhsz
+ dsz
;
396 msg_set_size(mhdr
, msz
);
398 /* No fragmentation needed? */
399 if (likely(msz
<= pktmax
)) {
400 skb
= tipc_buf_acquire(msz
, GFP_KERNEL
);
402 /* Fall back to smaller MTU if node local message */
403 if (unlikely(!skb
)) {
404 if (pktmax
!= MAX_MSG_SIZE
)
406 rc
= tipc_msg_build(mhdr
, m
, offset
, dsz
, FB_MTU
, list
);
409 if (tipc_msg_assemble(list
))
414 __skb_queue_tail(list
, skb
);
415 skb_copy_to_linear_data(skb
, mhdr
, mhsz
);
416 pktpos
= skb
->data
+ mhsz
;
417 if (copy_from_iter_full(pktpos
, dsz
, &m
->msg_iter
))
423 /* Prepare reusable fragment header */
424 tipc_msg_init(msg_prevnode(mhdr
), &pkthdr
, MSG_FRAGMENTER
,
425 FIRST_FRAGMENT
, INT_H_SIZE
, msg_destnode(mhdr
));
426 msg_set_size(&pkthdr
, pktmax
);
427 msg_set_fragm_no(&pkthdr
, pktno
);
428 msg_set_importance(&pkthdr
, msg_importance(mhdr
));
430 /* Prepare first fragment */
431 skb
= tipc_buf_acquire(pktmax
, GFP_KERNEL
);
435 __skb_queue_tail(list
, skb
);
437 skb_copy_to_linear_data(skb
, &pkthdr
, INT_H_SIZE
);
438 pktpos
+= INT_H_SIZE
;
439 pktrem
-= INT_H_SIZE
;
440 skb_copy_to_linear_data_offset(skb
, INT_H_SIZE
, mhdr
, mhsz
);
448 if (!copy_from_iter_full(pktpos
, pktrem
, &m
->msg_iter
)) {
457 /* Prepare new fragment: */
458 if (drem
< (pktmax
- INT_H_SIZE
))
459 pktsz
= drem
+ INT_H_SIZE
;
462 skb
= tipc_buf_acquire(pktsz
, GFP_KERNEL
);
468 __skb_queue_tail(list
, skb
);
469 msg_set_type(&pkthdr
, FRAGMENT
);
470 msg_set_size(&pkthdr
, pktsz
);
471 msg_set_fragm_no(&pkthdr
, ++pktno
);
472 skb_copy_to_linear_data(skb
, &pkthdr
, INT_H_SIZE
);
473 pktpos
= skb
->data
+ INT_H_SIZE
;
474 pktrem
= pktsz
- INT_H_SIZE
;
477 msg_set_type(buf_msg(skb
), LAST_FRAGMENT
);
480 __skb_queue_purge(list
);
481 __skb_queue_head_init(list
);
486 * tipc_msg_bundle - Append contents of a buffer to tail of an existing one
487 * @bskb: the bundle buffer to append to
488 * @msg: message to be appended
489 * @max: max allowable size for the bundle buffer
491 * Returns "true" if bundling has been performed, otherwise "false"
493 static bool tipc_msg_bundle(struct sk_buff
*bskb
, struct tipc_msg
*msg
,
496 struct tipc_msg
*bmsg
= buf_msg(bskb
);
497 u32 msz
, bsz
, offset
, pad
;
500 bsz
= msg_size(bmsg
);
504 if (unlikely(skb_tailroom(bskb
) < (pad
+ msz
)))
506 if (unlikely(max
< (offset
+ msz
)))
509 skb_put(bskb
, pad
+ msz
);
510 skb_copy_to_linear_data_offset(bskb
, offset
, msg
, msz
);
511 msg_set_size(bmsg
, offset
+ msz
);
512 msg_set_msgcnt(bmsg
, msg_msgcnt(bmsg
) + 1);
517 * tipc_msg_try_bundle - Try to bundle a new message to the last one
518 * @tskb: the last/target message to which the new one will be appended
519 * @skb: the new message skb pointer
520 * @mss: max message size (header inclusive)
521 * @dnode: destination node for the message
522 * @new_bundle: if this call made a new bundle or not
524 * Return: "true" if the new message skb is potential for bundling this time or
525 * later, in the case a bundling has been done this time, the skb is consumed
526 * (the skb pointer = NULL).
527 * Otherwise, "false" if the skb cannot be bundled at all.
529 bool tipc_msg_try_bundle(struct sk_buff
*tskb
, struct sk_buff
**skb
, u32 mss
,
530 u32 dnode
, bool *new_bundle
)
532 struct tipc_msg
*msg
, *inner
, *outer
;
535 /* First, check if the new buffer is suitable for bundling */
537 if (msg_user(msg
) == MSG_FRAGMENTER
)
539 if (msg_user(msg
) == TUNNEL_PROTOCOL
)
541 if (msg_user(msg
) == BCAST_PROTOCOL
)
543 if (mss
<= INT_H_SIZE
+ msg_size(msg
))
546 /* Ok, but the last/target buffer can be empty? */
550 /* Is it a bundle already? Try to bundle the new message to it */
551 if (msg_user(buf_msg(tskb
)) == MSG_BUNDLER
) {
556 /* Make a new bundle of the two messages if possible */
557 tsz
= msg_size(buf_msg(tskb
));
558 if (unlikely(mss
< align(INT_H_SIZE
+ tsz
) + msg_size(msg
)))
560 if (unlikely(pskb_expand_head(tskb
, INT_H_SIZE
, mss
- tsz
- INT_H_SIZE
,
563 inner
= buf_msg(tskb
);
564 skb_push(tskb
, INT_H_SIZE
);
565 outer
= buf_msg(tskb
);
566 tipc_msg_init(msg_prevnode(inner
), outer
, MSG_BUNDLER
, 0, INT_H_SIZE
,
568 msg_set_importance(outer
, msg_importance(inner
));
569 msg_set_size(outer
, INT_H_SIZE
+ tsz
);
570 msg_set_msgcnt(outer
, 1);
574 if (likely(tipc_msg_bundle(tskb
, msg
, mss
))) {
582 * tipc_msg_extract(): extract bundled inner packet from buffer
583 * @skb: buffer to be extracted from.
584 * @iskb: extracted inner buffer, to be returned
585 * @pos: position in outer message of msg to be extracted.
586 * Returns position of next msg
587 * Consumes outer buffer when last packet extracted
588 * Returns true when when there is an extracted buffer, otherwise false
590 bool tipc_msg_extract(struct sk_buff
*skb
, struct sk_buff
**iskb
, int *pos
)
592 struct tipc_msg
*hdr
, *ihdr
;
596 if (unlikely(skb_linearize(skb
)))
600 if (unlikely(*pos
> (msg_data_sz(hdr
) - MIN_H_SIZE
)))
603 ihdr
= (struct tipc_msg
*)(msg_data(hdr
) + *pos
);
604 imsz
= msg_size(ihdr
);
606 if ((*pos
+ imsz
) > msg_data_sz(hdr
))
609 *iskb
= tipc_buf_acquire(imsz
, GFP_ATOMIC
);
613 skb_copy_to_linear_data(*iskb
, ihdr
, imsz
);
614 if (unlikely(!tipc_msg_validate(iskb
)))
627 * tipc_msg_reverse(): swap source and destination addresses and add error code
628 * @own_node: originating node id for reversed message
629 * @skb: buffer containing message to be reversed; will be consumed
630 * @err: error code to be set in message, if any
631 * Replaces consumed buffer with new one when successful
632 * Returns true if success, otherwise false
634 bool tipc_msg_reverse(u32 own_node
, struct sk_buff
**skb
, int err
)
636 struct sk_buff
*_skb
= *skb
;
637 struct tipc_msg
*_hdr
, *hdr
;
640 if (skb_linearize(_skb
))
642 _hdr
= buf_msg(_skb
);
643 dlen
= min_t(uint
, msg_data_sz(_hdr
), MAX_FORWARD_SIZE
);
644 hlen
= msg_hdr_sz(_hdr
);
646 if (msg_dest_droppable(_hdr
))
648 if (msg_errcode(_hdr
))
651 /* Never return SHORT header */
652 if (hlen
== SHORT_H_SIZE
)
655 /* Don't return data along with SYN+, - sender has a clone */
656 if (msg_is_syn(_hdr
) && err
== TIPC_ERR_OVERLOAD
)
659 /* Allocate new buffer to return */
660 *skb
= tipc_buf_acquire(hlen
+ dlen
, GFP_ATOMIC
);
663 memcpy((*skb
)->data
, _skb
->data
, msg_hdr_sz(_hdr
));
664 memcpy((*skb
)->data
+ hlen
, msg_data(_hdr
), dlen
);
666 /* Build reverse header in new buffer */
668 msg_set_hdr_sz(hdr
, hlen
);
669 msg_set_errcode(hdr
, err
);
670 msg_set_non_seq(hdr
, 0);
671 msg_set_origport(hdr
, msg_destport(_hdr
));
672 msg_set_destport(hdr
, msg_origport(_hdr
));
673 msg_set_destnode(hdr
, msg_prevnode(_hdr
));
674 msg_set_prevnode(hdr
, own_node
);
675 msg_set_orignode(hdr
, own_node
);
676 msg_set_size(hdr
, hlen
+ dlen
);
686 bool tipc_msg_skb_clone(struct sk_buff_head
*msg
, struct sk_buff_head
*cpy
)
688 struct sk_buff
*skb
, *_skb
;
690 skb_queue_walk(msg
, skb
) {
691 _skb
= skb_clone(skb
, GFP_ATOMIC
);
693 __skb_queue_purge(cpy
);
694 pr_err_ratelimited("Failed to clone buffer chain\n");
697 __skb_queue_tail(cpy
, _skb
);
703 * tipc_msg_lookup_dest(): try to find new destination for named message
704 * @skb: the buffer containing the message.
705 * @err: error code to be used by caller if lookup fails
706 * Does not consume buffer
707 * Returns true if a destination is found, false otherwise
709 bool tipc_msg_lookup_dest(struct net
*net
, struct sk_buff
*skb
, int *err
)
711 struct tipc_msg
*msg
= buf_msg(skb
);
713 u32 onode
= tipc_own_addr(net
);
715 if (!msg_isdata(msg
))
719 if (msg_errcode(msg
))
721 *err
= TIPC_ERR_NO_NAME
;
722 if (skb_linearize(skb
))
725 if (msg_reroute_cnt(msg
))
727 dnode
= tipc_scope2node(net
, msg_lookup_scope(msg
));
728 dport
= tipc_nametbl_translate(net
, msg_nametype(msg
),
729 msg_nameinst(msg
), &dnode
);
732 msg_incr_reroute_cnt(msg
);
734 msg_set_prevnode(msg
, onode
);
735 msg_set_destnode(msg
, dnode
);
736 msg_set_destport(msg
, dport
);
742 /* tipc_msg_assemble() - assemble chain of fragments into one message
744 bool tipc_msg_assemble(struct sk_buff_head
*list
)
746 struct sk_buff
*skb
, *tmp
= NULL
;
748 if (skb_queue_len(list
) == 1)
751 while ((skb
= __skb_dequeue(list
))) {
753 if (tipc_buf_append(&tmp
, &skb
)) {
754 __skb_queue_tail(list
, skb
);
760 __skb_queue_purge(list
);
761 __skb_queue_head_init(list
);
762 pr_warn("Failed do assemble buffer\n");
766 /* tipc_msg_reassemble() - clone a buffer chain of fragments and
767 * reassemble the clones into one message
769 bool tipc_msg_reassemble(struct sk_buff_head
*list
, struct sk_buff_head
*rcvq
)
771 struct sk_buff
*skb
, *_skb
;
772 struct sk_buff
*frag
= NULL
;
773 struct sk_buff
*head
= NULL
;
776 /* Copy header if single buffer */
777 if (skb_queue_len(list
) == 1) {
778 skb
= skb_peek(list
);
779 hdr_len
= skb_headroom(skb
) + msg_hdr_sz(buf_msg(skb
));
780 _skb
= __pskb_copy(skb
, hdr_len
, GFP_ATOMIC
);
783 __skb_queue_tail(rcvq
, _skb
);
787 /* Clone all fragments and reassemble */
788 skb_queue_walk(list
, skb
) {
789 frag
= skb_clone(skb
, GFP_ATOMIC
);
793 if (tipc_buf_append(&head
, &frag
))
798 __skb_queue_tail(rcvq
, frag
);
801 pr_warn("Failed do clone local mcast rcv buffer\n");
806 bool tipc_msg_pskb_copy(u32 dst
, struct sk_buff_head
*msg
,
807 struct sk_buff_head
*cpy
)
809 struct sk_buff
*skb
, *_skb
;
811 skb_queue_walk(msg
, skb
) {
812 _skb
= pskb_copy(skb
, GFP_ATOMIC
);
814 __skb_queue_purge(cpy
);
817 msg_set_destnode(buf_msg(_skb
), dst
);
818 __skb_queue_tail(cpy
, _skb
);
823 /* tipc_skb_queue_sorted(); sort pkt into list according to sequence number
824 * @list: list to be appended to
825 * @seqno: sequence number of buffer to add
826 * @skb: buffer to add
828 void __tipc_skb_queue_sorted(struct sk_buff_head
*list
, u16 seqno
,
831 struct sk_buff
*_skb
, *tmp
;
833 if (skb_queue_empty(list
) || less(seqno
, buf_seqno(skb_peek(list
)))) {
834 __skb_queue_head(list
, skb
);
838 if (more(seqno
, buf_seqno(skb_peek_tail(list
)))) {
839 __skb_queue_tail(list
, skb
);
843 skb_queue_walk_safe(list
, _skb
, tmp
) {
844 if (more(seqno
, buf_seqno(_skb
)))
846 if (seqno
== buf_seqno(_skb
))
848 __skb_queue_before(list
, _skb
, skb
);
854 void tipc_skb_reject(struct net
*net
, int err
, struct sk_buff
*skb
,
855 struct sk_buff_head
*xmitq
)
857 if (tipc_msg_reverse(tipc_own_addr(net
), &skb
, err
))
858 __skb_queue_tail(xmitq
, skb
);