powerpc/fadump: Do not allow hot-remove memory from fadump reserved area.

[linux/fpc-iii.git] / drivers / net / wan / cosa.c

/* $Id: cosa.c,v 1.31 2000/03/08 17:47:16 kas Exp $ */

/*
 *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz>
 *  Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/*
 * The driver for the SRP and COSA synchronous serial cards.
 *
 * HARDWARE INFO
 *
 * Both cards are developed at the Institute of Computer Science,
 * Masaryk University (http://www.ics.muni.cz/). The hardware is
 * developed by Jiri Novotny <novotny@ics.muni.cz>. More information
 * and the photo of both cards is available at
 * http://www.pavoucek.cz/cosa.html. The card documentation, firmwares
 * and other goods can be downloaded from ftp://ftp.ics.muni.cz/pub/cosa/.
 * For Linux-specific utilities, see below in the "Software info" section.
 * If you want to order the card, contact Jiri Novotny.
 *
 * The SRP (serial port?, the Czech word "srp" means "sickle") card
 * is a 2-port intelligent (with its own 8-bit CPU) synchronous serial card
 * with V.24 interfaces up to 80kb/s each.
 *
 * The COSA (communication serial adapter?, the Czech word "kosa" means
 * "scythe") is a next-generation sync/async board with two interfaces
 * - currently any of V.24, X.21, V.35 and V.36 can be selected.
 * It has a 16-bit SAB80166 CPU and can do up to 10 Mb/s per channel.
 * The 8-channels version is in development.
 *
 * Both types have downloadable firmware and communicate via ISA DMA.
 * COSA can be also a bus-mastering device.
 *
 * SOFTWARE INFO
 *
 * The homepage of the Linux driver is at http://www.fi.muni.cz/~kas/cosa/.
 * The CVS tree of Linux driver can be viewed there, as well as the
 * firmware binaries and user-space utilities for downloading the firmware
 * into the card and setting up the card.
 *
 * The Linux driver (unlike the present *BSD drivers :-) can work even
 * for the COSA and SRP in one computer and allows each channel to work
 * in one of the two modes (character or network device).
 *
 * AUTHOR
 *
 * The Linux driver was written by Jan "Yenya" Kasprzak <kas@fi.muni.cz>.
 *
 * You can mail me bugfixes and even success reports. I am especially
 * interested in the SMP and/or muliti-channel success/failure reports
 * (I wonder if I did the locking properly :-).
 *
 * THE AUTHOR USED THE FOLLOWING SOURCES WHEN PROGRAMMING THE DRIVER
 *
 * The COSA/SRP NetBSD driver by Zdenek Salvet and Ivos Cernohlavek
 * The skeleton.c by Donald Becker
 * The SDL Riscom/N2 driver by Mike Natale
 * The Comtrol Hostess SV11 driver by Alan Cox
 * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched/signal.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/hdlc.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>

#undef COSA_SLOW_IO     /* for testing purposes only */

#include "cosa.h"

/* Maximum length of the identification string. */
#define COSA_MAX_ID_STRING      128

/* Maximum length of the channel name */
#define COSA_MAX_NAME           (sizeof("cosaXXXcXXX")+1)

/* Per-channel data structure */

struct channel_data {
        int usage;      /* Usage count; >0 for chrdev, -1 for netdev */
        int num;        /* Number of the channel */
        struct cosa_data *cosa; /* Pointer to the per-card structure */
        int txsize;     /* Size of transmitted data */
        char *txbuf;    /* Transmit buffer */
        char name[COSA_MAX_NAME];       /* channel name */

        /* The HW layer interface */
        /* routine called from the RX interrupt */
        char *(*setup_rx)(struct channel_data *channel, int size);
        /* routine called when the RX is done (from the EOT interrupt) */
        int (*rx_done)(struct channel_data *channel);
        /* routine called when the TX is done (from the EOT interrupt) */
        int (*tx_done)(struct channel_data *channel, int size);

        /* Character device parts */
        struct mutex rlock;
        struct semaphore wsem;
        char *rxdata;
        int rxsize;
        wait_queue_head_t txwaitq, rxwaitq;
        int tx_status, rx_status;

        /* generic HDLC device parts */
        struct net_device *netdev;
        struct sk_buff *rx_skb, *tx_skb;
};

/* cosa->firmware_status bits */
#define COSA_FW_RESET           (1<<0)  /* Is the ROM monitor active? */
#define COSA_FW_DOWNLOAD        (1<<1)  /* Is the microcode downloaded? */
#define COSA_FW_START           (1<<2)  /* Is the microcode running? */

struct cosa_data {
        int num;                        /* Card number */
        char name[COSA_MAX_NAME];       /* Card name - e.g "cosa0" */
        unsigned int datareg, statusreg;        /* I/O ports */
        unsigned short irq, dma;        /* IRQ and DMA number */
        unsigned short startaddr;       /* Firmware start address */
        unsigned short busmaster;       /* Use busmastering? */
        int nchannels;                  /* # of channels on this card */
        int driver_status;              /* For communicating with firmware */
        int firmware_status;            /* Downloaded, reseted, etc. */
        unsigned long rxbitmap, txbitmap;/* Bitmap of channels who are willing to send/receive data */
        unsigned long rxtx;             /* RX or TX in progress? */
        int enabled;
        int usage;                              /* usage count */
        int txchan, txsize, rxsize;
        struct channel_data *rxchan;
        char *bouncebuf;
        char *txbuf, *rxbuf;
        struct channel_data *chan;
        spinlock_t lock;        /* For exclusive operations on this structure */
        char id_string[COSA_MAX_ID_STRING];     /* ROM monitor ID string */
        char *type;                             /* card type */
};

/*
 * Define this if you want all the possible ports to be autoprobed.
 * It is here but it probably is not a good idea to use this.
 */
/* #define COSA_ISA_AUTOPROBE   1 */

/*
 * Character device major number. 117 was allocated for us.
 * The value of 0 means to allocate a first free one.
 */
static DEFINE_MUTEX(cosa_chardev_mutex);
static int cosa_major = 117;

/*
 * Encoding of the minor numbers:
 * The lowest CARD_MINOR_BITS bits means the channel on the single card,
 * the highest bits means the card number.
 */
#define CARD_MINOR_BITS 4       /* How many bits in minor number are reserved
                                 * for the single card */
/*
 * The following depends on CARD_MINOR_BITS. Unfortunately, the "MODULE_STRING"
 * macro doesn't like anything other than the raw number as an argument :-(
 */
#define MAX_CARDS       16
/* #define MAX_CARDS    (1 << (8-CARD_MINOR_BITS)) */

#define DRIVER_RX_READY         0x0001
#define DRIVER_TX_READY         0x0002
#define DRIVER_TXMAP_SHIFT      2
#define DRIVER_TXMAP_MASK       0x0c    /* FIXME: 0xfc for 8-channel version */

/*
 * for cosa->rxtx - indicates whether either transmit or receive is
 * in progress. These values are mean number of the bit.
 */
#define TXBIT 0
#define RXBIT 1
#define IRQBIT 2

#define COSA_MTU 2000   /* FIXME: I don't know this exactly */

#undef DEBUG_DATA //1   /* Dump the data read or written to the channel */
#undef DEBUG_IRQS //1   /* Print the message when the IRQ is received */
#undef DEBUG_IO   //1   /* Dump the I/O traffic */

#define TX_TIMEOUT      (5*HZ)

/* Maybe the following should be allocated dynamically */
static struct cosa_data cosa_cards[MAX_CARDS];
static int nr_cards;

#ifdef COSA_ISA_AUTOPROBE
static int io[MAX_CARDS+1]  = { 0x220, 0x228, 0x210, 0x218, 0, };
/* NOTE: DMA is not autoprobed!!! */
static int dma[MAX_CARDS+1] = { 1, 7, 1, 7, 1, 7, 1, 7, 0, };
#else
static int io[MAX_CARDS+1];
static int dma[MAX_CARDS+1];
#endif
/* IRQ can be safely autoprobed */
static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, };

/* for class stuff*/
static struct class *cosa_class;

#ifdef MODULE
module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards");
module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards");
module_param_hw_array(dma, int, dma, NULL, 0);
MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards");

MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>");
MODULE_DESCRIPTION("Modular driver for the COSA or SRP synchronous card");
MODULE_LICENSE("GPL");
#endif

/* I use this mainly for testing purposes */
#ifdef COSA_SLOW_IO
#define cosa_outb outb_p
#define cosa_outw outw_p
#define cosa_inb  inb_p
#define cosa_inw  inw_p
#else
#define cosa_outb outb
#define cosa_outw outw
#define cosa_inb  inb
#define cosa_inw  inw
#endif

#define is_8bit(cosa)           (!(cosa->datareg & 0x08))

#define cosa_getstatus(cosa)    (cosa_inb(cosa->statusreg))
#define cosa_putstatus(cosa, stat)      (cosa_outb(stat, cosa->statusreg))
#define cosa_getdata16(cosa)    (cosa_inw(cosa->datareg))
#define cosa_getdata8(cosa)     (cosa_inb(cosa->datareg))
#define cosa_putdata16(cosa, dt)        (cosa_outw(dt, cosa->datareg))
#define cosa_putdata8(cosa, dt) (cosa_outb(dt, cosa->datareg))

/* Initialization stuff */
static int cosa_probe(int ioaddr, int irq, int dma);

/* HW interface */
static void cosa_enable_rx(struct channel_data *chan);
static void cosa_disable_rx(struct channel_data *chan);
static int cosa_start_tx(struct channel_data *channel, char *buf, int size);
static void cosa_kick(struct cosa_data *cosa);
static int cosa_dma_able(struct channel_data *chan, char *buf, int data);

/* Network device stuff */
static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
                           unsigned short parity);
static int cosa_net_open(struct net_device *d);
static int cosa_net_close(struct net_device *d);
static void cosa_net_timeout(struct net_device *d);
static netdev_tx_t cosa_net_tx(struct sk_buff *skb, struct net_device *d);
static char *cosa_net_setup_rx(struct channel_data *channel, int size);
static int cosa_net_rx_done(struct channel_data *channel);
static int cosa_net_tx_done(struct channel_data *channel, int size);
static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);

/* Character device */
static char *chrdev_setup_rx(struct channel_data *channel, int size);
static int chrdev_rx_done(struct channel_data *channel);
static int chrdev_tx_done(struct channel_data *channel, int size);
static ssize_t cosa_read(struct file *file,
        char __user *buf, size_t count, loff_t *ppos);
static ssize_t cosa_write(struct file *file,
        const char __user *buf, size_t count, loff_t *ppos);
static unsigned int cosa_poll(struct file *file, poll_table *poll);
static int cosa_open(struct inode *inode, struct file *file);
static int cosa_release(struct inode *inode, struct file *file);
static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
                                unsigned long arg);
#ifdef COSA_FASYNC_WORKING
static int cosa_fasync(struct inode *inode, struct file *file, int on);
#endif

static const struct file_operations cosa_fops = {
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
        .read           = cosa_read,
        .write          = cosa_write,
        .poll           = cosa_poll,
        .unlocked_ioctl = cosa_chardev_ioctl,
        .open           = cosa_open,
        .release        = cosa_release,
#ifdef COSA_FASYNC_WORKING
        .fasync         = cosa_fasync,
#endif
};

/* Ioctls */
static int cosa_start(struct cosa_data *cosa, int address);
static int cosa_reset(struct cosa_data *cosa);
static int cosa_download(struct cosa_data *cosa, void __user *a);
static int cosa_readmem(struct cosa_data *cosa, void __user *a);

/* COSA/SRP ROM monitor */
static int download(struct cosa_data *cosa, const char __user *data, int addr, int len);
static int startmicrocode(struct cosa_data *cosa, int address);
static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);

/* Auxiliary functions */
static int get_wait_data(struct cosa_data *cosa);
static int put_wait_data(struct cosa_data *cosa, int data);
static int puthexnumber(struct cosa_data *cosa, int number);
static void put_driver_status(struct cosa_data *cosa);
static void put_driver_status_nolock(struct cosa_data *cosa);

/* Interrupt handling */
static irqreturn_t cosa_interrupt(int irq, void *cosa);

/* I/O ops debugging */
#ifdef DEBUG_IO
static void debug_data_in(struct cosa_data *cosa, int data);
static void debug_data_out(struct cosa_data *cosa, int data);
static void debug_data_cmd(struct cosa_data *cosa, int data);
static void debug_status_in(struct cosa_data *cosa, int status);
static void debug_status_out(struct cosa_data *cosa, int status);
#endif

static inline struct channel_data* dev_to_chan(struct net_device *dev)
{
        return (struct channel_data *)dev_to_hdlc(dev)->priv;
}

/* ---------- Initialization stuff ---------- */

static int __init cosa_init(void)
{
        int i, err = 0;

        if (cosa_major > 0) {
                if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
                        pr_warn("unable to get major %d\n", cosa_major);
                        err = -EIO;
                        goto out;
                }
        } else {
                if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
                        pr_warn("unable to register chardev\n");
                        err = -EIO;
                        goto out;
                }
        }
        for (i=0; i<MAX_CARDS; i++)
                cosa_cards[i].num = -1;
        for (i=0; io[i] != 0 && i < MAX_CARDS; i++)
                cosa_probe(io[i], irq[i], dma[i]);
        if (!nr_cards) {
                pr_warn("no devices found\n");
                unregister_chrdev(cosa_major, "cosa");
                err = -ENODEV;
                goto out;
        }
        cosa_class = class_create(THIS_MODULE, "cosa");
        if (IS_ERR(cosa_class)) {
                err = PTR_ERR(cosa_class);
                goto out_chrdev;
        }
        for (i = 0; i < nr_cards; i++)
                device_create(cosa_class, NULL, MKDEV(cosa_major, i), NULL,
                              "cosa%d", i);
        err = 0;
        goto out;

out_chrdev:
        unregister_chrdev(cosa_major, "cosa");
out:
        return err;
}
module_init(cosa_init);

static void __exit cosa_exit(void)
{
        struct cosa_data *cosa;
        int i;

        for (i = 0; i < nr_cards; i++)
                device_destroy(cosa_class, MKDEV(cosa_major, i));
        class_destroy(cosa_class);

        for (cosa = cosa_cards; nr_cards--; cosa++) {
                /* Clean up the per-channel data */
                for (i = 0; i < cosa->nchannels; i++) {
                        /* Chardev driver has no alloc'd per-channel data */
                        unregister_hdlc_device(cosa->chan[i].netdev);
                        free_netdev(cosa->chan[i].netdev);
                }
                /* Clean up the per-card data */
                kfree(cosa->chan);
                kfree(cosa->bouncebuf);
                free_irq(cosa->irq, cosa);
                free_dma(cosa->dma);
                release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4);
        }
        unregister_chrdev(cosa_major, "cosa");
}
module_exit(cosa_exit);

static const struct net_device_ops cosa_ops = {
        .ndo_open       = cosa_net_open,
        .ndo_stop       = cosa_net_close,
        .ndo_start_xmit = hdlc_start_xmit,
        .ndo_do_ioctl   = cosa_net_ioctl,
        .ndo_tx_timeout = cosa_net_timeout,
};

static int cosa_probe(int base, int irq, int dma)
{
        struct cosa_data *cosa = cosa_cards+nr_cards;
        int i, err = 0;

        memset(cosa, 0, sizeof(struct cosa_data));

        /* Checking validity of parameters: */
        /* IRQ should be 2-7 or 10-15; negative IRQ means autoprobe */
        if ((irq >= 0  && irq < 2) || irq > 15 || (irq < 10 && irq > 7)) {
                pr_info("invalid IRQ %d\n", irq);
                return -1;
        }
        /* I/O address should be between 0x100 and 0x3ff and should be
         * multiple of 8. */
        if (base < 0x100 || base > 0x3ff || base & 0x7) {
                pr_info("invalid I/O address 0x%x\n", base);
                return -1;
        }
        /* DMA should be 0,1 or 3-7 */
        if (dma < 0 || dma == 4 || dma > 7) {
                pr_info("invalid DMA %d\n", dma);
                return -1;
        }
        /* and finally, on 16-bit COSA DMA should be 4-7 and 
         * I/O base should not be multiple of 0x10 */
        if (((base & 0x8) && dma < 4) || (!(base & 0x8) && dma > 3)) {
                pr_info("8/16 bit base and DMA mismatch (base=0x%x, dma=%d)\n",
                        base, dma);
                return -1;
        }

        cosa->dma = dma;
        cosa->datareg = base;
        cosa->statusreg = is_8bit(cosa)?base+1:base+2;
        spin_lock_init(&cosa->lock);

        if (!request_region(base, is_8bit(cosa)?2:4,"cosa"))
                return -1;
        
        if (cosa_reset_and_read_id(cosa, cosa->id_string) < 0) {
                printk(KERN_DEBUG "probe at 0x%x failed.\n", base);
                err = -1;
                goto err_out;
        }

        /* Test the validity of identification string */
        if (!strncmp(cosa->id_string, "SRP", 3))
                cosa->type = "srp";
        else if (!strncmp(cosa->id_string, "COSA", 4))
                cosa->type = is_8bit(cosa)? "cosa8": "cosa16";
        else {
/* Print a warning only if we are not autoprobing */
#ifndef COSA_ISA_AUTOPROBE
                pr_info("valid signature not found at 0x%x\n", base);
#endif
                err = -1;
                goto err_out;
        }
        /* Update the name of the region now we know the type of card */ 
        release_region(base, is_8bit(cosa)?2:4);
        if (!request_region(base, is_8bit(cosa)?2:4, cosa->type)) {
                printk(KERN_DEBUG "changing name at 0x%x failed.\n", base);
                return -1;
        }

        /* Now do IRQ autoprobe */
        if (irq < 0) {
                unsigned long irqs;
/*              pr_info("IRQ autoprobe\n"); */
                irqs = probe_irq_on();
                /* 
                 * Enable interrupt on tx buffer empty (it sure is) 
                 * really sure ?
                 * FIXME: When this code is not used as module, we should
                 * probably call udelay() instead of the interruptible sleep.
                 */
                set_current_state(TASK_INTERRUPTIBLE);
                cosa_putstatus(cosa, SR_TX_INT_ENA);
                schedule_timeout(msecs_to_jiffies(300));
                irq = probe_irq_off(irqs);
                /* Disable all IRQs from the card */
                cosa_putstatus(cosa, 0);
                /* Empty the received data register */
                cosa_getdata8(cosa);

                if (irq < 0) {
                        pr_info("multiple interrupts obtained (%d, board at 0x%x)\n",
                                irq, cosa->datareg);
                        err = -1;
                        goto err_out;
                }
                if (irq == 0) {
                        pr_info("no interrupt obtained (board at 0x%x)\n",
                                cosa->datareg);
                /*      return -1; */
                }
        }

        cosa->irq = irq;
        cosa->num = nr_cards;
        cosa->usage = 0;
        cosa->nchannels = 2;    /* FIXME: how to determine this? */

        if (request_irq(cosa->irq, cosa_interrupt, 0, cosa->type, cosa)) {
                err = -1;
                goto err_out;
        }
        if (request_dma(cosa->dma, cosa->type)) {
                err = -1;
                goto err_out1;
        }
        
        cosa->bouncebuf = kmalloc(COSA_MTU, GFP_KERNEL|GFP_DMA);
        if (!cosa->bouncebuf) {
                err = -ENOMEM;
                goto err_out2;
        }
        sprintf(cosa->name, "cosa%d", cosa->num);

        /* Initialize the per-channel data */
        cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL);
        if (!cosa->chan) {
                err = -ENOMEM;
                goto err_out3;
        }

        for (i = 0; i < cosa->nchannels; i++) {
                struct channel_data *chan = &cosa->chan[i];

                chan->cosa = cosa;
                chan->num = i;
                sprintf(chan->name, "cosa%dc%d", chan->cosa->num, i);

                /* Initialize the chardev data structures */
                mutex_init(&chan->rlock);
                sema_init(&chan->wsem, 1);

                /* Register the network interface */
                if (!(chan->netdev = alloc_hdlcdev(chan))) {
                        pr_warn("%s: alloc_hdlcdev failed\n", chan->name);
                        err = -ENOMEM;
                        goto err_hdlcdev;
                }
                dev_to_hdlc(chan->netdev)->attach = cosa_net_attach;
                dev_to_hdlc(chan->netdev)->xmit = cosa_net_tx;
                chan->netdev->netdev_ops = &cosa_ops;
                chan->netdev->watchdog_timeo = TX_TIMEOUT;
                chan->netdev->base_addr = chan->cosa->datareg;
                chan->netdev->irq = chan->cosa->irq;
                chan->netdev->dma = chan->cosa->dma;
                err = register_hdlc_device(chan->netdev);
                if (err) {
                        netdev_warn(chan->netdev,
                                    "register_hdlc_device() failed\n");
                        free_netdev(chan->netdev);
                        goto err_hdlcdev;
                }
        }

        pr_info("cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
                cosa->num, cosa->id_string, cosa->type,
                cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);

        return nr_cards++;

err_hdlcdev:
        while (i-- > 0) {
                unregister_hdlc_device(cosa->chan[i].netdev);
                free_netdev(cosa->chan[i].netdev);
        }
        kfree(cosa->chan);
err_out3:
        kfree(cosa->bouncebuf);
err_out2:
        free_dma(cosa->dma);
err_out1:
        free_irq(cosa->irq, cosa);
err_out:
        release_region(cosa->datareg,is_8bit(cosa)?2:4);
        pr_notice("cosa%d: allocating resources failed\n", cosa->num);
        return err;
}

\f
/*---------- network device ---------- */

static int cosa_net_attach(struct net_device *dev, unsigned short encoding,
                           unsigned short parity)
{
        if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
                return 0;
        return -EINVAL;
}

static int cosa_net_open(struct net_device *dev)
{
        struct channel_data *chan = dev_to_chan(dev);
        int err;
        unsigned long flags;

        if (!(chan->cosa->firmware_status & COSA_FW_START)) {
                pr_notice("%s: start the firmware first (status %d)\n",
                          chan->cosa->name, chan->cosa->firmware_status);
                return -EPERM;
        }
        spin_lock_irqsave(&chan->cosa->lock, flags);
        if (chan->usage != 0) {
                pr_warn("%s: cosa_net_open called with usage count %d\n",
                        chan->name, chan->usage);
                spin_unlock_irqrestore(&chan->cosa->lock, flags);
                return -EBUSY;
        }
        chan->setup_rx = cosa_net_setup_rx;
        chan->tx_done = cosa_net_tx_done;
        chan->rx_done = cosa_net_rx_done;
        chan->usage = -1;
        chan->cosa->usage++;
        spin_unlock_irqrestore(&chan->cosa->lock, flags);

        err = hdlc_open(dev);
        if (err) {
                spin_lock_irqsave(&chan->cosa->lock, flags);
                chan->usage = 0;
                chan->cosa->usage--;
                spin_unlock_irqrestore(&chan->cosa->lock, flags);
                return err;
        }

        netif_start_queue(dev);
        cosa_enable_rx(chan);
        return 0;
}

static netdev_tx_t cosa_net_tx(struct sk_buff *skb,
                                     struct net_device *dev)
{
        struct channel_data *chan = dev_to_chan(dev);

        netif_stop_queue(dev);

        chan->tx_skb = skb;
        cosa_start_tx(chan, skb->data, skb->len);
        return NETDEV_TX_OK;
}

static void cosa_net_timeout(struct net_device *dev)
{
        struct channel_data *chan = dev_to_chan(dev);

        if (test_bit(RXBIT, &chan->cosa->rxtx)) {
                chan->netdev->stats.rx_errors++;
                chan->netdev->stats.rx_missed_errors++;
        } else {
                chan->netdev->stats.tx_errors++;
                chan->netdev->stats.tx_aborted_errors++;
        }
        cosa_kick(chan->cosa);
        if (chan->tx_skb) {
                dev_kfree_skb(chan->tx_skb);
                chan->tx_skb = NULL;
        }
        netif_wake_queue(dev);
}

static int cosa_net_close(struct net_device *dev)
{
        struct channel_data *chan = dev_to_chan(dev);
        unsigned long flags;

        netif_stop_queue(dev);
        hdlc_close(dev);
        cosa_disable_rx(chan);
        spin_lock_irqsave(&chan->cosa->lock, flags);
        if (chan->rx_skb) {
                kfree_skb(chan->rx_skb);
                chan->rx_skb = NULL;
        }
        if (chan->tx_skb) {
                kfree_skb(chan->tx_skb);
                chan->tx_skb = NULL;
        }
        chan->usage = 0;
        chan->cosa->usage--;
        spin_unlock_irqrestore(&chan->cosa->lock, flags);
        return 0;
}

static char *cosa_net_setup_rx(struct channel_data *chan, int size)
{
        /*
         * We can safely fall back to non-dma-able memory, because we have
         * the cosa->bouncebuf pre-allocated.
         */
        kfree_skb(chan->rx_skb);
        chan->rx_skb = dev_alloc_skb(size);
        if (chan->rx_skb == NULL) {
                pr_notice("%s: Memory squeeze, dropping packet\n", chan->name);
                chan->netdev->stats.rx_dropped++;
                return NULL;
        }
        netif_trans_update(chan->netdev);
        return skb_put(chan->rx_skb, size);
}

static int cosa_net_rx_done(struct channel_data *chan)
{
        if (!chan->rx_skb) {
                pr_warn("%s: rx_done with empty skb!\n", chan->name);
                chan->netdev->stats.rx_errors++;
                chan->netdev->stats.rx_frame_errors++;
                return 0;
        }
        chan->rx_skb->protocol = hdlc_type_trans(chan->rx_skb, chan->netdev);
        chan->rx_skb->dev = chan->netdev;
        skb_reset_mac_header(chan->rx_skb);
        chan->netdev->stats.rx_packets++;
        chan->netdev->stats.rx_bytes += chan->cosa->rxsize;
        netif_rx(chan->rx_skb);
        chan->rx_skb = NULL;
        return 0;
}

/* ARGSUSED */
static int cosa_net_tx_done(struct channel_data *chan, int size)
{
        if (!chan->tx_skb) {
                pr_warn("%s: tx_done with empty skb!\n", chan->name);
                chan->netdev->stats.tx_errors++;
                chan->netdev->stats.tx_aborted_errors++;
                return 1;
        }
        dev_kfree_skb_irq(chan->tx_skb);
        chan->tx_skb = NULL;
        chan->netdev->stats.tx_packets++;
        chan->netdev->stats.tx_bytes += size;
        netif_wake_queue(chan->netdev);
        return 1;
}

/*---------- Character device ---------- */

static ssize_t cosa_read(struct file *file,
        char __user *buf, size_t count, loff_t *ppos)
{
        DECLARE_WAITQUEUE(wait, current);
        unsigned long flags;
        struct channel_data *chan = file->private_data;
        struct cosa_data *cosa = chan->cosa;
        char *kbuf;

        if (!(cosa->firmware_status & COSA_FW_START)) {
                pr_notice("%s: start the firmware first (status %d)\n",
                          cosa->name, cosa->firmware_status);
                return -EPERM;
        }
        if (mutex_lock_interruptible(&chan->rlock))
                return -ERESTARTSYS;
        
        chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL);
        if (chan->rxdata == NULL) {
                mutex_unlock(&chan->rlock);
                return -ENOMEM;
        }

        chan->rx_status = 0;
        cosa_enable_rx(chan);
        spin_lock_irqsave(&cosa->lock, flags);
        add_wait_queue(&chan->rxwaitq, &wait);
        while (!chan->rx_status) {
                set_current_state(TASK_INTERRUPTIBLE);
                spin_unlock_irqrestore(&cosa->lock, flags);
                schedule();
                spin_lock_irqsave(&cosa->lock, flags);
                if (signal_pending(current) && chan->rx_status == 0) {
                        chan->rx_status = 1;
                        remove_wait_queue(&chan->rxwaitq, &wait);
                        __set_current_state(TASK_RUNNING);
                        spin_unlock_irqrestore(&cosa->lock, flags);
                        mutex_unlock(&chan->rlock);
                        return -ERESTARTSYS;
                }
        }
        remove_wait_queue(&chan->rxwaitq, &wait);
        __set_current_state(TASK_RUNNING);
        kbuf = chan->rxdata;
        count = chan->rxsize;
        spin_unlock_irqrestore(&cosa->lock, flags);
        mutex_unlock(&chan->rlock);

        if (copy_to_user(buf, kbuf, count)) {
                kfree(kbuf);
                return -EFAULT;
        }
        kfree(kbuf);
        return count;
}

static char *chrdev_setup_rx(struct channel_data *chan, int size)
{
        /* Expect size <= COSA_MTU */
        chan->rxsize = size;
        return chan->rxdata;
}

static int chrdev_rx_done(struct channel_data *chan)
{
        if (chan->rx_status) { /* Reader has died */
                kfree(chan->rxdata);
                up(&chan->wsem);
        }
        chan->rx_status = 1;
        wake_up_interruptible(&chan->rxwaitq);
        return 1;
}


static ssize_t cosa_write(struct file *file,
        const char __user *buf, size_t count, loff_t *ppos)
{
        DECLARE_WAITQUEUE(wait, current);
        struct channel_data *chan = file->private_data;
        struct cosa_data *cosa = chan->cosa;
        unsigned long flags;
        char *kbuf;

        if (!(cosa->firmware_status & COSA_FW_START)) {
                pr_notice("%s: start the firmware first (status %d)\n",
                          cosa->name, cosa->firmware_status);
                return -EPERM;
        }
        if (down_interruptible(&chan->wsem))
                return -ERESTARTSYS;

        if (count > COSA_MTU)
                count = COSA_MTU;
        
        /* Allocate the buffer */
        kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA);
        if (kbuf == NULL) {
                up(&chan->wsem);
                return -ENOMEM;
        }
        if (copy_from_user(kbuf, buf, count)) {
                up(&chan->wsem);
                kfree(kbuf);
                return -EFAULT;
        }
        chan->tx_status=0;
        cosa_start_tx(chan, kbuf, count);

        spin_lock_irqsave(&cosa->lock, flags);
        add_wait_queue(&chan->txwaitq, &wait);
        while (!chan->tx_status) {
                set_current_state(TASK_INTERRUPTIBLE);
                spin_unlock_irqrestore(&cosa->lock, flags);
                schedule();
                spin_lock_irqsave(&cosa->lock, flags);
                if (signal_pending(current) && chan->tx_status == 0) {
                        chan->tx_status = 1;
                        remove_wait_queue(&chan->txwaitq, &wait);
                        __set_current_state(TASK_RUNNING);
                        chan->tx_status = 1;
                        spin_unlock_irqrestore(&cosa->lock, flags);
                        up(&chan->wsem);
                        return -ERESTARTSYS;
                }
        }
        remove_wait_queue(&chan->txwaitq, &wait);
        __set_current_state(TASK_RUNNING);
        up(&chan->wsem);
        spin_unlock_irqrestore(&cosa->lock, flags);
        kfree(kbuf);
        return count;
}

static int chrdev_tx_done(struct channel_data *chan, int size)
{
        if (chan->tx_status) { /* Writer was interrupted */
                kfree(chan->txbuf);
                up(&chan->wsem);
        }
        chan->tx_status = 1;
        wake_up_interruptible(&chan->txwaitq);
        return 1;
}

static __poll_t cosa_poll(struct file *file, poll_table *poll)
{
        pr_info("cosa_poll is here\n");
        return 0;
}

static int cosa_open(struct inode *inode, struct file *file)
{
        struct cosa_data *cosa;
        struct channel_data *chan;
        unsigned long flags;
        int n;
        int ret = 0;

        mutex_lock(&cosa_chardev_mutex);
        if ((n=iminor(file_inode(file))>>CARD_MINOR_BITS)
                >= nr_cards) {
                ret = -ENODEV;
                goto out;
        }
        cosa = cosa_cards+n;

        if ((n=iminor(file_inode(file))
                & ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels) {
                ret = -ENODEV;
                goto out;
        }
        chan = cosa->chan + n;
        
        file->private_data = chan;

        spin_lock_irqsave(&cosa->lock, flags);

        if (chan->usage < 0) { /* in netdev mode */
                spin_unlock_irqrestore(&cosa->lock, flags);
                ret = -EBUSY;
                goto out;
        }
        cosa->usage++;
        chan->usage++;

        chan->tx_done = chrdev_tx_done;
        chan->setup_rx = chrdev_setup_rx;
        chan->rx_done = chrdev_rx_done;
        spin_unlock_irqrestore(&cosa->lock, flags);
out:
        mutex_unlock(&cosa_chardev_mutex);
        return ret;
}

static int cosa_release(struct inode *inode, struct file *file)
{
        struct channel_data *channel = file->private_data;
        struct cosa_data *cosa;
        unsigned long flags;

        cosa = channel->cosa;
        spin_lock_irqsave(&cosa->lock, flags);
        cosa->usage--;
        channel->usage--;
        spin_unlock_irqrestore(&cosa->lock, flags);
        return 0;
}

#ifdef COSA_FASYNC_WORKING
static struct fasync_struct *fasync[256] = { NULL, };

/* To be done ... */
static int cosa_fasync(struct inode *inode, struct file *file, int on)
{
        int port = iminor(inode);

        return fasync_helper(inode, file, on, &fasync[port]);
}
#endif

\f
/* ---------- Ioctls ---------- */

/*
 * Ioctl subroutines can safely be made inline, because they are called
 * only from cosa_ioctl().
 */
static inline int cosa_reset(struct cosa_data *cosa)
{
        char idstring[COSA_MAX_ID_STRING];
        if (cosa->usage > 1)
                pr_info("cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
                        cosa->num, cosa->usage);
        cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_START);
        if (cosa_reset_and_read_id(cosa, idstring) < 0) {
                pr_notice("cosa%d: reset failed\n", cosa->num);
                return -EIO;
        }
        pr_info("cosa%d: resetting device: %s\n", cosa->num, idstring);
        cosa->firmware_status |= COSA_FW_RESET;
        return 0;
}

/* High-level function to download data into COSA memory. Calls download() */
static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
{
        struct cosa_download d;
        int i;

        if (cosa->usage > 1)
                pr_info("%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
                        cosa->name, cosa->usage);
        if (!(cosa->firmware_status & COSA_FW_RESET)) {
                pr_notice("%s: reset the card first (status %d)\n",
                          cosa->name, cosa->firmware_status);
                return -EPERM;
        }
        
        if (copy_from_user(&d, arg, sizeof(d)))
                return -EFAULT;

        if (d.addr < 0 || d.addr > COSA_MAX_FIRMWARE_SIZE)
                return -EINVAL;
        if (d.len < 0 || d.len > COSA_MAX_FIRMWARE_SIZE)
                return -EINVAL;


        /* If something fails, force the user to reset the card */
        cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_DOWNLOAD);

        i = download(cosa, d.code, d.len, d.addr);
        if (i < 0) {
                pr_notice("cosa%d: microcode download failed: %d\n",
                          cosa->num, i);
                return -EIO;
        }
        pr_info("cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
                cosa->num, d.len, d.addr);
        cosa->firmware_status |= COSA_FW_RESET|COSA_FW_DOWNLOAD;
        return 0;
}

/* High-level function to read COSA memory. Calls readmem() */
static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
{
        struct cosa_download d;
        int i;

        if (cosa->usage > 1)
                pr_info("cosa%d: WARNING: readmem requested with cosa->usage > 1 (%d). Odd things may happen.\n",
                        cosa->num, cosa->usage);
        if (!(cosa->firmware_status & COSA_FW_RESET)) {
                pr_notice("%s: reset the card first (status %d)\n",
                          cosa->name, cosa->firmware_status);
                return -EPERM;
        }

        if (copy_from_user(&d, arg, sizeof(d)))
                return -EFAULT;

        /* If something fails, force the user to reset the card */
        cosa->firmware_status &= ~COSA_FW_RESET;

        i = readmem(cosa, d.code, d.len, d.addr);
        if (i < 0) {
                pr_notice("cosa%d: reading memory failed: %d\n", cosa->num, i);
                return -EIO;
        }
        pr_info("cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
                cosa->num, d.len, d.addr);
        cosa->firmware_status |= COSA_FW_RESET;
        return 0;
}

/* High-level function to start microcode. Calls startmicrocode(). */
static inline int cosa_start(struct cosa_data *cosa, int address)
{
        int i;

        if (cosa->usage > 1)
                pr_info("cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
                        cosa->num, cosa->usage);

        if ((cosa->firmware_status & (COSA_FW_RESET|COSA_FW_DOWNLOAD))
                != (COSA_FW_RESET|COSA_FW_DOWNLOAD)) {
                pr_notice("%s: download the microcode and/or reset the card first (status %d)\n",
                          cosa->name, cosa->firmware_status);
                return -EPERM;
        }
        cosa->firmware_status &= ~COSA_FW_RESET;
        if ((i=startmicrocode(cosa, address)) < 0) {
                pr_notice("cosa%d: start microcode at 0x%04x failed: %d\n",
                          cosa->num, address, i);
                return -EIO;
        }
        pr_info("cosa%d: starting microcode at 0x%04x\n", cosa->num, address);
        cosa->startaddr = address;
        cosa->firmware_status |= COSA_FW_START;
        return 0;
}
                
/* Buffer of size at least COSA_MAX_ID_STRING is expected */
static inline int cosa_getidstr(struct cosa_data *cosa, char __user *string)
{
        int l = strlen(cosa->id_string)+1;
        if (copy_to_user(string, cosa->id_string, l))
                return -EFAULT;
        return l;
}

/* Buffer of size at least COSA_MAX_ID_STRING is expected */
static inline int cosa_gettype(struct cosa_data *cosa, char __user *string)
{
        int l = strlen(cosa->type)+1;
        if (copy_to_user(string, cosa->type, l))
                return -EFAULT;
        return l;
}

static int cosa_ioctl_common(struct cosa_data *cosa,
        struct channel_data *channel, unsigned int cmd, unsigned long arg)
{
        void __user *argp = (void __user *)arg;
        switch (cmd) {
        case COSAIORSET:        /* Reset the device */
                if (!capable(CAP_NET_ADMIN))
                        return -EACCES;
                return cosa_reset(cosa);
        case COSAIOSTRT:        /* Start the firmware */
                if (!capable(CAP_SYS_RAWIO))
                        return -EACCES;
                return cosa_start(cosa, arg);
        case COSAIODOWNLD:      /* Download the firmware */
                if (!capable(CAP_SYS_RAWIO))
                        return -EACCES;
                
                return cosa_download(cosa, argp);
        case COSAIORMEM:
                if (!capable(CAP_SYS_RAWIO))
                        return -EACCES;
                return cosa_readmem(cosa, argp);
        case COSAIORTYPE:
                return cosa_gettype(cosa, argp);
        case COSAIORIDSTR:
                return cosa_getidstr(cosa, argp);
        case COSAIONRCARDS:
                return nr_cards;
        case COSAIONRCHANS:
                return cosa->nchannels;
        case COSAIOBMSET:
                if (!capable(CAP_SYS_RAWIO))
                        return -EACCES;
                if (is_8bit(cosa))
                        return -EINVAL;
                if (arg != COSA_BM_OFF && arg != COSA_BM_ON)
                        return -EINVAL;
                cosa->busmaster = arg;
                return 0;
        case COSAIOBMGET:
                return cosa->busmaster;
        }
        return -ENOIOCTLCMD;
}

static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
        int rv;
        struct channel_data *chan = dev_to_chan(dev);
        rv = cosa_ioctl_common(chan->cosa, chan, cmd,
                               (unsigned long)ifr->ifr_data);
        if (rv != -ENOIOCTLCMD)
                return rv;
        return hdlc_ioctl(dev, ifr, cmd);
}

static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
                                                        unsigned long arg)
{
        struct channel_data *channel = file->private_data;
        struct cosa_data *cosa;
        long ret;

        mutex_lock(&cosa_chardev_mutex);
        cosa = channel->cosa;
        ret = cosa_ioctl_common(cosa, channel, cmd, arg);
        mutex_unlock(&cosa_chardev_mutex);
        return ret;
}

\f
/*---------- HW layer interface ---------- */

/*
 * The higher layer can bind itself to the HW layer by setting the callbacks
 * in the channel_data structure and by using these routines.
 */
static void cosa_enable_rx(struct channel_data *chan)
{
        struct cosa_data *cosa = chan->cosa;

        if (!test_and_set_bit(chan->num, &cosa->rxbitmap))
                put_driver_status(cosa);
}

static void cosa_disable_rx(struct channel_data *chan)
{
        struct cosa_data *cosa = chan->cosa;

        if (test_and_clear_bit(chan->num, &cosa->rxbitmap))
                put_driver_status(cosa);
}

/*
 * FIXME: This routine probably should check for cosa_start_tx() called when
 * the previous transmit is still unfinished. In this case the non-zero
 * return value should indicate to the caller that the queuing(sp?) up
 * the transmit has failed.
 */
static int cosa_start_tx(struct channel_data *chan, char *buf, int len)
{
        struct cosa_data *cosa = chan->cosa;
        unsigned long flags;
#ifdef DEBUG_DATA
        int i;

        pr_info("cosa%dc%d: starting tx(0x%x)",
                chan->cosa->num, chan->num, len);
        for (i=0; i<len; i++)
                pr_cont(" %02x", buf[i]&0xff);
        pr_cont("\n");
#endif
        spin_lock_irqsave(&cosa->lock, flags);
        chan->txbuf = buf;
        chan->txsize = len;
        if (len > COSA_MTU)
                chan->txsize = COSA_MTU;
        spin_unlock_irqrestore(&cosa->lock, flags);

        /* Tell the firmware we are ready */
        set_bit(chan->num, &cosa->txbitmap);
        put_driver_status(cosa);

        return 0;
}

static void put_driver_status(struct cosa_data *cosa)
{
        unsigned long flags;
        int status;

        spin_lock_irqsave(&cosa->lock, flags);

        status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
                | (cosa->txbitmap ? DRIVER_TX_READY : 0)
                | (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
                        &DRIVER_TXMAP_MASK : 0);
        if (!cosa->rxtx) {
                if (cosa->rxbitmap|cosa->txbitmap) {
                        if (!cosa->enabled) {
                                cosa_putstatus(cosa, SR_RX_INT_ENA);
#ifdef DEBUG_IO
                                debug_status_out(cosa, SR_RX_INT_ENA);
#endif
                                cosa->enabled = 1;
                        }
                } else if (cosa->enabled) {
                        cosa->enabled = 0;
                        cosa_putstatus(cosa, 0);
#ifdef DEBUG_IO
                        debug_status_out(cosa, 0);
#endif
                }
                cosa_putdata8(cosa, status);
#ifdef DEBUG_IO
                debug_data_cmd(cosa, status);
#endif
        }
        spin_unlock_irqrestore(&cosa->lock, flags);
}

static void put_driver_status_nolock(struct cosa_data *cosa)
{
        int status;

        status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
                | (cosa->txbitmap ? DRIVER_TX_READY : 0)
                | (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
                        &DRIVER_TXMAP_MASK : 0);

        if (cosa->rxbitmap|cosa->txbitmap) {
                cosa_putstatus(cosa, SR_RX_INT_ENA);
#ifdef DEBUG_IO
                debug_status_out(cosa, SR_RX_INT_ENA);
#endif
                cosa->enabled = 1;
        } else {
                cosa_putstatus(cosa, 0);
#ifdef DEBUG_IO
                debug_status_out(cosa, 0);
#endif
                cosa->enabled = 0;
        }
        cosa_putdata8(cosa, status);
#ifdef DEBUG_IO
        debug_data_cmd(cosa, status);
#endif
}

/*
 * The "kickme" function: When the DMA times out, this is called to
 * clean up the driver status.
 * FIXME: Preliminary support, the interface is probably wrong.
 */
static void cosa_kick(struct cosa_data *cosa)
{
        unsigned long flags, flags1;
        char *s = "(probably) IRQ";

        if (test_bit(RXBIT, &cosa->rxtx))
                s = "RX DMA";
        if (test_bit(TXBIT, &cosa->rxtx))
                s = "TX DMA";

        pr_info("%s: %s timeout - restarting\n", cosa->name, s);
        spin_lock_irqsave(&cosa->lock, flags);
        cosa->rxtx = 0;

        flags1 = claim_dma_lock();
        disable_dma(cosa->dma);
        clear_dma_ff(cosa->dma);
        release_dma_lock(flags1);

        /* FIXME: Anything else? */
        udelay(100);
        cosa_putstatus(cosa, 0);
        udelay(100);
        (void) cosa_getdata8(cosa);
        udelay(100);
        cosa_putdata8(cosa, 0);
        udelay(100);
        put_driver_status_nolock(cosa);
        spin_unlock_irqrestore(&cosa->lock, flags);
}

/*
 * Check if the whole buffer is DMA-able. It means it is below the 16M of
 * physical memory and doesn't span the 64k boundary. For now it seems
 * SKB's never do this, but we'll check this anyway.
 */
static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
{
        static int count;
        unsigned long b = (unsigned long)buf;
        if (b+len >= MAX_DMA_ADDRESS)
                return 0;
        if ((b^ (b+len)) & 0x10000) {
                if (count++ < 5)
                        pr_info("%s: packet spanning a 64k boundary\n",
                                chan->name);
                return 0;
        }
        return 1;
}

\f
/* ---------- The SRP/COSA ROM monitor functions ---------- */

/*
 * Downloading SRP microcode: say "w" to SRP monitor, it answers by "w=",
 * drivers need to say 4-digit hex number meaning start address of the microcode
 * separated by a single space. Monitor replies by saying " =". Now driver
 * has to write 4-digit hex number meaning the last byte address ended
 * by a single space. Monitor has to reply with a space. Now the download
 * begins. After the download monitor replies with "\r\n." (CR LF dot).
 */
static int download(struct cosa_data *cosa, const char __user *microcode, int length, int address)
{
        int i;

        if (put_wait_data(cosa, 'w') == -1) return -1;
        if ((i=get_wait_data(cosa)) != 'w') { printk("dnld: 0x%04x\n",i); return -2;}
        if (get_wait_data(cosa) != '=') return -3;

        if (puthexnumber(cosa, address) < 0) return -4;
        if (put_wait_data(cosa, ' ') == -1) return -10;
        if (get_wait_data(cosa) != ' ') return -11;
        if (get_wait_data(cosa) != '=') return -12;

        if (puthexnumber(cosa, address+length-1) < 0) return -13;
        if (put_wait_data(cosa, ' ') == -1) return -18;
        if (get_wait_data(cosa) != ' ') return -19;

        while (length--) {
                char c;
#ifndef SRP_DOWNLOAD_AT_BOOT
                if (get_user(c, microcode))
                        return -23; /* ??? */
#else
                c = *microcode;
#endif
                if (put_wait_data(cosa, c) == -1)
                        return -20;
                microcode++;
        }

        if (get_wait_data(cosa) != '\r') return -21;
        if (get_wait_data(cosa) != '\n') return -22;
        if (get_wait_data(cosa) != '.') return -23;
#if 0
        printk(KERN_DEBUG "cosa%d: download completed.\n", cosa->num);
#endif
        return 0;
}


/*
 * Starting microcode is done via the "g" command of the SRP monitor.
 * The chat should be the following: "g" "g=" "<addr><CR>"
 * "<CR><CR><LF><CR><LF>".
 */
static int startmicrocode(struct cosa_data *cosa, int address)
{
        if (put_wait_data(cosa, 'g') == -1) return -1;
        if (get_wait_data(cosa) != 'g') return -2;
        if (get_wait_data(cosa) != '=') return -3;

        if (puthexnumber(cosa, address) < 0) return -4;
        if (put_wait_data(cosa, '\r') == -1) return -5;
        
        if (get_wait_data(cosa) != '\r') return -6;
        if (get_wait_data(cosa) != '\r') return -7;
        if (get_wait_data(cosa) != '\n') return -8;
        if (get_wait_data(cosa) != '\r') return -9;
        if (get_wait_data(cosa) != '\n') return -10;
#if 0
        printk(KERN_DEBUG "cosa%d: microcode started\n", cosa->num);
#endif
        return 0;
}

/*
 * Reading memory is done via the "r" command of the SRP monitor.
 * The chat is the following "r" "r=" "<addr> " " =" "<last_byte> " " "
 * Then driver can read the data and the conversation is finished
 * by SRP monitor sending "<CR><LF>." (dot at the end).
 *
 * This routine is not needed during the normal operation and serves
 * for debugging purposes only.
 */
static int readmem(struct cosa_data *cosa, char __user *microcode, int length, int address)
{
        if (put_wait_data(cosa, 'r') == -1) return -1;
        if ((get_wait_data(cosa)) != 'r') return -2;
        if ((get_wait_data(cosa)) != '=') return -3;

        if (puthexnumber(cosa, address) < 0) return -4;
        if (put_wait_data(cosa, ' ') == -1) return -5;
        if (get_wait_data(cosa) != ' ') return -6;
        if (get_wait_data(cosa) != '=') return -7;

        if (puthexnumber(cosa, address+length-1) < 0) return -8;
        if (put_wait_data(cosa, ' ') == -1) return -9;
        if (get_wait_data(cosa) != ' ') return -10;

        while (length--) {
                char c;
                int i;
                if ((i=get_wait_data(cosa)) == -1) {
                        pr_info("0x%04x bytes remaining\n", length);
                        return -11;
                }
                c=i;
#if 1
                if (put_user(c, microcode))
                        return -23; /* ??? */
#else
                *microcode = c;
#endif
                microcode++;
        }

        if (get_wait_data(cosa) != '\r') return -21;
        if (get_wait_data(cosa) != '\n') return -22;
        if (get_wait_data(cosa) != '.') return -23;
#if 0
        printk(KERN_DEBUG "cosa%d: readmem completed.\n", cosa->num);
#endif
        return 0;
}

/*
 * This function resets the device and reads the initial prompt
 * of the device's ROM monitor.
 */
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
{
        int i=0, id=0, prev=0, curr=0;

        /* Reset the card ... */
        cosa_putstatus(cosa, 0);
        cosa_getdata8(cosa);
        cosa_putstatus(cosa, SR_RST);
        msleep(500);
        /* Disable all IRQs from the card */
        cosa_putstatus(cosa, 0);

        /*
         * Try to read the ID string. The card then prints out the
         * identification string ended by the "\n\x2e".
         *
         * The following loop is indexed through i (instead of id)
         * to avoid looping forever when for any reason
         * the port returns '\r', '\n' or '\x2e' permanently.
         */
        for (i=0; i<COSA_MAX_ID_STRING-1; i++, prev=curr) {
                if ((curr = get_wait_data(cosa)) == -1) {
                        return -1;
                }
                curr &= 0xff;
                if (curr != '\r' && curr != '\n' && curr != 0x2e)
                        idstring[id++] = curr;
                if (curr == 0x2e && prev == '\n')
                        break;
        }
        /* Perhaps we should fail when i==COSA_MAX_ID_STRING-1 ? */
        idstring[id] = '\0';
        return id;
}

\f
/* ---------- Auxiliary routines for COSA/SRP monitor ---------- */

/*
 * This routine gets the data byte from the card waiting for the SR_RX_RDY
 * bit to be set in a loop. It should be used in the exceptional cases
 * only (for example when resetting the card or downloading the firmware.
 */
static int get_wait_data(struct cosa_data *cosa)
{
        int retries = 1000;

        while (--retries) {
                /* read data and return them */
                if (cosa_getstatus(cosa) & SR_RX_RDY) {
                        short r;
                        r = cosa_getdata8(cosa);
#if 0
                        pr_info("get_wait_data returning after %d retries\n",
                                999-retries);
#endif
                        return r;
                }
                /* sleep if not ready to read */
                schedule_timeout_interruptible(1);
        }
        pr_info("timeout in get_wait_data (status 0x%x)\n",
                cosa_getstatus(cosa));
        return -1;
}

/*
 * This routine puts the data byte to the card waiting for the SR_TX_RDY
 * bit to be set in a loop. It should be used in the exceptional cases
 * only (for example when resetting the card or downloading the firmware).
 */
static int put_wait_data(struct cosa_data *cosa, int data)
{
        int retries = 1000;
        while (--retries) {
                /* read data and return them */
                if (cosa_getstatus(cosa) & SR_TX_RDY) {
                        cosa_putdata8(cosa, data);
#if 0
                        pr_info("Putdata: %d retries\n", 999-retries);
#endif
                        return 0;
                }
#if 0
                /* sleep if not ready to read */
                schedule_timeout_interruptible(1);
#endif
        }
        pr_info("cosa%d: timeout in put_wait_data (status 0x%x)\n",
                cosa->num, cosa_getstatus(cosa));
        return -1;
}
        
/* 
 * The following routine puts the hexadecimal number into the SRP monitor
 * and verifies the proper echo of the sent bytes. Returns 0 on success,
 * negative number on failure (-1,-3,-5,-7) means that put_wait_data() failed,
 * (-2,-4,-6,-8) means that reading echo failed.
 */
static int puthexnumber(struct cosa_data *cosa, int number)
{
        char temp[5];
        int i;

        /* Well, I should probably replace this by something faster. */
        sprintf(temp, "%04X", number);
        for (i=0; i<4; i++) {
                if (put_wait_data(cosa, temp[i]) == -1) {
                        pr_notice("cosa%d: puthexnumber failed to write byte %d\n",
                                  cosa->num, i);
                        return -1-2*i;
                }
                if (get_wait_data(cosa) != temp[i]) {
                        pr_notice("cosa%d: puthexhumber failed to read echo of byte %d\n",
                                  cosa->num, i);
                        return -2-2*i;
                }
        }
        return 0;
}

\f
/* ---------- Interrupt routines ---------- */

/*
 * There are three types of interrupt:
 * At the beginning of transmit - this handled is in tx_interrupt(),
 * at the beginning of receive - it is in rx_interrupt() and
 * at the end of transmit/receive - it is the eot_interrupt() function.
 * These functions are multiplexed by cosa_interrupt() according to the
 * COSA status byte. I have moved the rx/tx/eot interrupt handling into
 * separate functions to make it more readable. These functions are inline,
 * so there should be no overhead of function call.
 * 
 * In the COSA bus-master mode, we need to tell the card the address of a
 * buffer. Unfortunately, COSA may be too slow for us, so we must busy-wait.
 * It's time to use the bottom half :-(
 */

/*
 * Transmit interrupt routine - called when COSA is willing to obtain
 * data from the OS. The most tricky part of the routine is selection
 * of channel we (OS) want to send packet for. For SRP we should probably
 * use the round-robin approach. The newer COSA firmwares have a simple
 * flow-control - in the status word has bits 2 and 3 set to 1 means that the
 * channel 0 or 1 doesn't want to receive data.
 *
 * It seems there is a bug in COSA firmware (need to trace it further):
 * When the driver status says that the kernel has no more data for transmit
 * (e.g. at the end of TX DMA) and then the kernel changes its mind
 * (e.g. new packet is queued to hard_start_xmit()), the card issues
 * the TX interrupt but does not mark the channel as ready-to-transmit.
 * The fix seems to be to push the packet to COSA despite its request.
 * We first try to obey the card's opinion, and then fall back to forced TX.
 */
static inline void tx_interrupt(struct cosa_data *cosa, int status)
{
        unsigned long flags, flags1;
#ifdef DEBUG_IRQS
        pr_info("cosa%d: SR_DOWN_REQUEST status=0x%04x\n", cosa->num, status);
#endif
        spin_lock_irqsave(&cosa->lock, flags);
        set_bit(TXBIT, &cosa->rxtx);
        if (!test_bit(IRQBIT, &cosa->rxtx)) {
                /* flow control, see the comment above */
                int i=0;
                if (!cosa->txbitmap) {
                        pr_warn("%s: No channel wants data in TX IRQ. Expect DMA timeout.\n",
                                cosa->name);
                        put_driver_status_nolock(cosa);
                        clear_bit(TXBIT, &cosa->rxtx);
                        spin_unlock_irqrestore(&cosa->lock, flags);
                        return;
                }
                while (1) {
                        cosa->txchan++;
                        i++;
                        if (cosa->txchan >= cosa->nchannels)
                                cosa->txchan = 0;
                        if (!(cosa->txbitmap & (1<<cosa->txchan)))
                                continue;
                        if (~status & (1 << (cosa->txchan+DRIVER_TXMAP_SHIFT)))
                                break;
                        /* in second pass, accept first ready-to-TX channel */
                        if (i > cosa->nchannels) {
                                /* Can be safely ignored */
#ifdef DEBUG_IRQS
                                printk(KERN_DEBUG "%s: Forcing TX "
                                        "to not-ready channel %d\n",
                                        cosa->name, cosa->txchan);
#endif
                                break;
                        }
                }

                cosa->txsize = cosa->chan[cosa->txchan].txsize;
                if (cosa_dma_able(cosa->chan+cosa->txchan,
                        cosa->chan[cosa->txchan].txbuf, cosa->txsize)) {
                        cosa->txbuf = cosa->chan[cosa->txchan].txbuf;
                } else {
                        memcpy(cosa->bouncebuf, cosa->chan[cosa->txchan].txbuf,
                                cosa->txsize);
                        cosa->txbuf = cosa->bouncebuf;
                }
        }

        if (is_8bit(cosa)) {
                if (!test_bit(IRQBIT, &cosa->rxtx)) {
                        cosa_putstatus(cosa, SR_TX_INT_ENA);
                        cosa_putdata8(cosa, ((cosa->txchan << 5) & 0xe0)|
                                ((cosa->txsize >> 8) & 0x1f));
#ifdef DEBUG_IO
                        debug_status_out(cosa, SR_TX_INT_ENA);
                        debug_data_out(cosa, ((cosa->txchan << 5) & 0xe0)|
                                ((cosa->txsize >> 8) & 0x1f));
                        debug_data_in(cosa, cosa_getdata8(cosa));
#else
                        cosa_getdata8(cosa);
#endif
                        set_bit(IRQBIT, &cosa->rxtx);
                        spin_unlock_irqrestore(&cosa->lock, flags);
                        return;
                } else {
                        clear_bit(IRQBIT, &cosa->rxtx);
                        cosa_putstatus(cosa, 0);
                        cosa_putdata8(cosa, cosa->txsize&0xff);
#ifdef DEBUG_IO
                        debug_status_out(cosa, 0);
                        debug_data_out(cosa, cosa->txsize&0xff);
#endif
                }
        } else {
                cosa_putstatus(cosa, SR_TX_INT_ENA);
                cosa_putdata16(cosa, ((cosa->txchan<<13) & 0xe000)
                        | (cosa->txsize & 0x1fff));
#ifdef DEBUG_IO
                debug_status_out(cosa, SR_TX_INT_ENA);
                debug_data_out(cosa, ((cosa->txchan<<13) & 0xe000)
                        | (cosa->txsize & 0x1fff));
                debug_data_in(cosa, cosa_getdata8(cosa));
                debug_status_out(cosa, 0);
#else
                cosa_getdata8(cosa);
#endif
                cosa_putstatus(cosa, 0);
        }

        if (cosa->busmaster) {
                unsigned long addr = virt_to_bus(cosa->txbuf);
                int count=0;
                pr_info("busmaster IRQ\n");
                while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
                        count++;
                        udelay(10);
                        if (count > 1000) break;
                }
                pr_info("status %x\n", cosa_getstatus(cosa));
                pr_info("ready after %d loops\n", count);
                cosa_putdata16(cosa, (addr >> 16)&0xffff);

                count = 0;
                while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
                        count++;
                        if (count > 1000) break;
                        udelay(10);
                }
                pr_info("ready after %d loops\n", count);
                cosa_putdata16(cosa, addr &0xffff);
                flags1 = claim_dma_lock();
                set_dma_mode(cosa->dma, DMA_MODE_CASCADE);
                enable_dma(cosa->dma);
                release_dma_lock(flags1);
        } else {
                /* start the DMA */
                flags1 = claim_dma_lock();
                disable_dma(cosa->dma);
                clear_dma_ff(cosa->dma);
                set_dma_mode(cosa->dma, DMA_MODE_WRITE);
                set_dma_addr(cosa->dma, virt_to_bus(cosa->txbuf));
                set_dma_count(cosa->dma, cosa->txsize);
                enable_dma(cosa->dma);
                release_dma_lock(flags1);
        }
        cosa_putstatus(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
#ifdef DEBUG_IO
        debug_status_out(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
#endif
        spin_unlock_irqrestore(&cosa->lock, flags);
}

static inline void rx_interrupt(struct cosa_data *cosa, int status)
{
        unsigned long flags;
#ifdef DEBUG_IRQS
        pr_info("cosa%d: SR_UP_REQUEST\n", cosa->num);
#endif

        spin_lock_irqsave(&cosa->lock, flags);
        set_bit(RXBIT, &cosa->rxtx);

        if (is_8bit(cosa)) {
                if (!test_bit(IRQBIT, &cosa->rxtx)) {
                        set_bit(IRQBIT, &cosa->rxtx);
                        put_driver_status_nolock(cosa);
                        cosa->rxsize = cosa_getdata8(cosa) <<8;
#ifdef DEBUG_IO
                        debug_data_in(cosa, cosa->rxsize >> 8);
#endif
                        spin_unlock_irqrestore(&cosa->lock, flags);
                        return;
                } else {
                        clear_bit(IRQBIT, &cosa->rxtx);
                        cosa->rxsize |= cosa_getdata8(cosa) & 0xff;
#ifdef DEBUG_IO
                        debug_data_in(cosa, cosa->rxsize & 0xff);
#endif
#if 0
                        pr_info("cosa%d: receive rxsize = (0x%04x)\n",
                                cosa->num, cosa->rxsize);
#endif
                }
        } else {
                cosa->rxsize = cosa_getdata16(cosa);
#ifdef DEBUG_IO
                debug_data_in(cosa, cosa->rxsize);
#endif
#if 0
                pr_info("cosa%d: receive rxsize = (0x%04x)\n",
                        cosa->num, cosa->rxsize);
#endif
        }
        if (((cosa->rxsize & 0xe000) >> 13) >= cosa->nchannels) {
                pr_warn("%s: rx for unknown channel (0x%04x)\n",
                        cosa->name, cosa->rxsize);
                spin_unlock_irqrestore(&cosa->lock, flags);
                goto reject;
        }
        cosa->rxchan = cosa->chan + ((cosa->rxsize & 0xe000) >> 13);
        cosa->rxsize &= 0x1fff;
        spin_unlock_irqrestore(&cosa->lock, flags);

        cosa->rxbuf = NULL;
        if (cosa->rxchan->setup_rx)
                cosa->rxbuf = cosa->rxchan->setup_rx(cosa->rxchan, cosa->rxsize);

        if (!cosa->rxbuf) {
reject:         /* Reject the packet */
                pr_info("cosa%d: rejecting packet on channel %d\n",
                        cosa->num, cosa->rxchan->num);
                cosa->rxbuf = cosa->bouncebuf;
        }

        /* start the DMA */
        flags = claim_dma_lock();
        disable_dma(cosa->dma);
        clear_dma_ff(cosa->dma);
        set_dma_mode(cosa->dma, DMA_MODE_READ);
        if (cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize & 0x1fff)) {
                set_dma_addr(cosa->dma, virt_to_bus(cosa->rxbuf));
        } else {
                set_dma_addr(cosa->dma, virt_to_bus(cosa->bouncebuf));
        }
        set_dma_count(cosa->dma, (cosa->rxsize&0x1fff));
        enable_dma(cosa->dma);
        release_dma_lock(flags);
        spin_lock_irqsave(&cosa->lock, flags);
        cosa_putstatus(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
        if (!is_8bit(cosa) && (status & SR_TX_RDY))
                cosa_putdata8(cosa, DRIVER_RX_READY);
#ifdef DEBUG_IO
        debug_status_out(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
        if (!is_8bit(cosa) && (status & SR_TX_RDY))
                debug_data_cmd(cosa, DRIVER_RX_READY);
#endif
        spin_unlock_irqrestore(&cosa->lock, flags);
}

static inline void eot_interrupt(struct cosa_data *cosa, int status)
{
        unsigned long flags, flags1;
        spin_lock_irqsave(&cosa->lock, flags);
        flags1 = claim_dma_lock();
        disable_dma(cosa->dma);
        clear_dma_ff(cosa->dma);
        release_dma_lock(flags1);
        if (test_bit(TXBIT, &cosa->rxtx)) {
                struct channel_data *chan = cosa->chan+cosa->txchan;
                if (chan->tx_done)
                        if (chan->tx_done(chan, cosa->txsize))
                                clear_bit(chan->num, &cosa->txbitmap);
        } else if (test_bit(RXBIT, &cosa->rxtx)) {
#ifdef DEBUG_DATA
        {
                int i;
                pr_info("cosa%dc%d: done rx(0x%x)",
                        cosa->num, cosa->rxchan->num, cosa->rxsize);
                for (i=0; i<cosa->rxsize; i++)
                        pr_cont(" %02x", cosa->rxbuf[i]&0xff);
                pr_cont("\n");
        }
#endif
                /* Packet for unknown channel? */
                if (cosa->rxbuf == cosa->bouncebuf)
                        goto out;
                if (!cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize))
                        memcpy(cosa->rxbuf, cosa->bouncebuf, cosa->rxsize);
                if (cosa->rxchan->rx_done)
                        if (cosa->rxchan->rx_done(cosa->rxchan))
                                clear_bit(cosa->rxchan->num, &cosa->rxbitmap);
        } else {
                pr_notice("cosa%d: unexpected EOT interrupt\n", cosa->num);
        }
        /*
         * Clear the RXBIT, TXBIT and IRQBIT (the latest should be
         * cleared anyway). We should do it as soon as possible
         * so that we can tell the COSA we are done and to give it a time
         * for recovery.
         */
out:
        cosa->rxtx = 0;
        put_driver_status_nolock(cosa);
        spin_unlock_irqrestore(&cosa->lock, flags);
}

static irqreturn_t cosa_interrupt(int irq, void *cosa_)
{
        unsigned status;
        int count = 0;
        struct cosa_data *cosa = cosa_;
again:
        status = cosa_getstatus(cosa);
#ifdef DEBUG_IRQS
        pr_info("cosa%d: got IRQ, status 0x%02x\n", cosa->num, status & 0xff);
#endif
#ifdef DEBUG_IO
        debug_status_in(cosa, status);
#endif
        switch (status & SR_CMD_FROM_SRP_MASK) {
        case SR_DOWN_REQUEST:
                tx_interrupt(cosa, status);
                break;
        case SR_UP_REQUEST:
                rx_interrupt(cosa, status);
                break;
        case SR_END_OF_TRANSFER:
                eot_interrupt(cosa, status);
                break;
        default:
                /* We may be too fast for SRP. Try to wait a bit more. */
                if (count++ < 100) {
                        udelay(100);
                        goto again;
                }
                pr_info("cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
                        cosa->num, status & 0xff, count);
        }
#ifdef DEBUG_IRQS
        if (count)
                pr_info("%s: %d-times got unknown status in IRQ\n",
                        cosa->name, count);
        else
                pr_info("%s: returning from IRQ\n", cosa->name);
#endif
        return IRQ_HANDLED;
}

\f
/* ---------- I/O debugging routines ---------- */
/*
 * These routines can be used to monitor COSA/SRP I/O and to printk()
 * the data being transferred on the data and status I/O port in a
 * readable way.
 */

#ifdef DEBUG_IO
static void debug_status_in(struct cosa_data *cosa, int status)
{
        char *s;
        switch (status & SR_CMD_FROM_SRP_MASK) {
        case SR_UP_REQUEST:
                s = "RX_REQ";
                break;
        case SR_DOWN_REQUEST:
                s = "TX_REQ";
                break;
        case SR_END_OF_TRANSFER:
                s = "ET_REQ";
                break;
        default:
                s = "NO_REQ";
                break;
        }
        pr_info("%s: IO: status -> 0x%02x (%s%s%s%s)\n",
                cosa->name,
                status,
                status & SR_USR_RQ ? "USR_RQ|" : "",
                status & SR_TX_RDY ? "TX_RDY|" : "",
                status & SR_RX_RDY ? "RX_RDY|" : "",
                s);
}

static void debug_status_out(struct cosa_data *cosa, int status)
{
        pr_info("%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
                cosa->name,
                status,
                status & SR_RX_DMA_ENA  ? "RXDMA|"  : "!rxdma|",
                status & SR_TX_DMA_ENA  ? "TXDMA|"  : "!txdma|",
                status & SR_RST         ? "RESET|"  : "",
                status & SR_USR_INT_ENA ? "USRINT|" : "!usrint|",
                status & SR_TX_INT_ENA  ? "TXINT|"  : "!txint|",
                status & SR_RX_INT_ENA  ? "RXINT"   : "!rxint");
}

static void debug_data_in(struct cosa_data *cosa, int data)
{
        pr_info("%s: IO: data -> 0x%04x\n", cosa->name, data);
}

static void debug_data_out(struct cosa_data *cosa, int data)
{
        pr_info("%s: IO: data <- 0x%04x\n", cosa->name, data);
}

static void debug_data_cmd(struct cosa_data *cosa, int data)
{
        pr_info("%s: IO: data <- 0x%04x (%s|%s)\n",
                cosa->name, data,
                data & SR_RDY_RCV ? "RX_RDY" : "!rx_rdy",
                data & SR_RDY_SND ? "TX_RDY" : "!tx_rdy");
}
#endif

/* EOF -- this file has not been truncated */