powerpc/fadump: Do not allow hot-remove memory from fadump reserved area.
[linux/fpc-iii.git] / drivers / xen / xen-acpi-processor.c
blobfbb9137c7d0287b652cf9c429db0ca593713032b
1 /*
2 * Copyright 2012 by Oracle Inc
3 * Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
5 * This code borrows ideas from https://lkml.org/lkml/2011/11/30/249
6 * so many thanks go to Kevin Tian <kevin.tian@intel.com>
7 * and Yu Ke <ke.yu@intel.com>.
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms and conditions of the GNU General Public License,
11 * version 2, as published by the Free Software Foundation.
13 * This program is distributed in the hope it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22 #include <linux/cpumask.h>
23 #include <linux/cpufreq.h>
24 #include <linux/freezer.h>
25 #include <linux/kernel.h>
26 #include <linux/kthread.h>
27 #include <linux/init.h>
28 #include <linux/module.h>
29 #include <linux/types.h>
30 #include <linux/syscore_ops.h>
31 #include <linux/acpi.h>
32 #include <acpi/processor.h>
33 #include <xen/xen.h>
34 #include <xen/interface/platform.h>
35 #include <asm/xen/hypercall.h>
37 static int no_hypercall;
38 MODULE_PARM_DESC(off, "Inhibit the hypercall.");
39 module_param_named(off, no_hypercall, int, 0400);
42 * Note: Do not convert the acpi_id* below to cpumask_var_t or use cpumask_bit
43 * - as those shrink to nr_cpu_bits (which is dependent on possible_cpu), which
44 * can be less than what we want to put in. Instead use the 'nr_acpi_bits'
45 * which is dynamically computed based on the MADT or x2APIC table.
47 static unsigned int nr_acpi_bits;
48 /* Mutex to protect the acpi_ids_done - for CPU hotplug use. */
49 static DEFINE_MUTEX(acpi_ids_mutex);
50 /* Which ACPI ID we have processed from 'struct acpi_processor'. */
51 static unsigned long *acpi_ids_done;
52 /* Which ACPI ID exist in the SSDT/DSDT processor definitions. */
53 static unsigned long *acpi_id_present;
54 /* And if there is an _CST definition (or a PBLK) for the ACPI IDs */
55 static unsigned long *acpi_id_cst_present;
56 /* Which ACPI P-State dependencies for a enumerated processor */
57 static struct acpi_psd_package *acpi_psd;
59 static int push_cxx_to_hypervisor(struct acpi_processor *_pr)
61 struct xen_platform_op op = {
62 .cmd = XENPF_set_processor_pminfo,
63 .interface_version = XENPF_INTERFACE_VERSION,
64 .u.set_pminfo.id = _pr->acpi_id,
65 .u.set_pminfo.type = XEN_PM_CX,
67 struct xen_processor_cx *dst_cx, *dst_cx_states = NULL;
68 struct acpi_processor_cx *cx;
69 unsigned int i, ok;
70 int ret = 0;
72 dst_cx_states = kcalloc(_pr->power.count,
73 sizeof(struct xen_processor_cx), GFP_KERNEL);
74 if (!dst_cx_states)
75 return -ENOMEM;
77 for (ok = 0, i = 1; i <= _pr->power.count; i++) {
78 cx = &_pr->power.states[i];
79 if (!cx->valid)
80 continue;
82 dst_cx = &(dst_cx_states[ok++]);
84 dst_cx->reg.space_id = ACPI_ADR_SPACE_SYSTEM_IO;
85 if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
86 dst_cx->reg.bit_width = 8;
87 dst_cx->reg.bit_offset = 0;
88 dst_cx->reg.access_size = 1;
89 } else {
90 dst_cx->reg.space_id = ACPI_ADR_SPACE_FIXED_HARDWARE;
91 if (cx->entry_method == ACPI_CSTATE_FFH) {
92 /* NATIVE_CSTATE_BEYOND_HALT */
93 dst_cx->reg.bit_offset = 2;
94 dst_cx->reg.bit_width = 1; /* VENDOR_INTEL */
96 dst_cx->reg.access_size = 0;
98 dst_cx->reg.address = cx->address;
100 dst_cx->type = cx->type;
101 dst_cx->latency = cx->latency;
103 dst_cx->dpcnt = 0;
104 set_xen_guest_handle(dst_cx->dp, NULL);
106 if (!ok) {
107 pr_debug("No _Cx for ACPI CPU %u\n", _pr->acpi_id);
108 kfree(dst_cx_states);
109 return -EINVAL;
111 op.u.set_pminfo.power.count = ok;
112 op.u.set_pminfo.power.flags.bm_control = _pr->flags.bm_control;
113 op.u.set_pminfo.power.flags.bm_check = _pr->flags.bm_check;
114 op.u.set_pminfo.power.flags.has_cst = _pr->flags.has_cst;
115 op.u.set_pminfo.power.flags.power_setup_done =
116 _pr->flags.power_setup_done;
118 set_xen_guest_handle(op.u.set_pminfo.power.states, dst_cx_states);
120 if (!no_hypercall)
121 ret = HYPERVISOR_platform_op(&op);
123 if (!ret) {
124 pr_debug("ACPI CPU%u - C-states uploaded.\n", _pr->acpi_id);
125 for (i = 1; i <= _pr->power.count; i++) {
126 cx = &_pr->power.states[i];
127 if (!cx->valid)
128 continue;
129 pr_debug(" C%d: %s %d uS\n",
130 cx->type, cx->desc, (u32)cx->latency);
132 } else if ((ret != -EINVAL) && (ret != -ENOSYS))
133 /* EINVAL means the ACPI ID is incorrect - meaning the ACPI
134 * table is referencing a non-existing CPU - which can happen
135 * with broken ACPI tables. */
136 pr_err("(CX): Hypervisor error (%d) for ACPI CPU%u\n",
137 ret, _pr->acpi_id);
139 kfree(dst_cx_states);
141 return ret;
143 static struct xen_processor_px *
144 xen_copy_pss_data(struct acpi_processor *_pr,
145 struct xen_processor_performance *dst_perf)
147 struct xen_processor_px *dst_states = NULL;
148 unsigned int i;
150 BUILD_BUG_ON(sizeof(struct xen_processor_px) !=
151 sizeof(struct acpi_processor_px));
153 dst_states = kcalloc(_pr->performance->state_count,
154 sizeof(struct xen_processor_px), GFP_KERNEL);
155 if (!dst_states)
156 return ERR_PTR(-ENOMEM);
158 dst_perf->state_count = _pr->performance->state_count;
159 for (i = 0; i < _pr->performance->state_count; i++) {
160 /* Fortunatly for us, they are both the same size */
161 memcpy(&(dst_states[i]), &(_pr->performance->states[i]),
162 sizeof(struct acpi_processor_px));
164 return dst_states;
166 static int xen_copy_psd_data(struct acpi_processor *_pr,
167 struct xen_processor_performance *dst)
169 struct acpi_psd_package *pdomain;
171 BUILD_BUG_ON(sizeof(struct xen_psd_package) !=
172 sizeof(struct acpi_psd_package));
174 /* This information is enumerated only if acpi_processor_preregister_performance
175 * has been called.
177 dst->shared_type = _pr->performance->shared_type;
179 pdomain = &(_pr->performance->domain_info);
181 /* 'acpi_processor_preregister_performance' does not parse if the
182 * num_processors <= 1, but Xen still requires it. Do it manually here.
184 if (pdomain->num_processors <= 1) {
185 if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
186 dst->shared_type = CPUFREQ_SHARED_TYPE_ALL;
187 else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
188 dst->shared_type = CPUFREQ_SHARED_TYPE_HW;
189 else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
190 dst->shared_type = CPUFREQ_SHARED_TYPE_ANY;
193 memcpy(&(dst->domain_info), pdomain, sizeof(struct acpi_psd_package));
194 return 0;
196 static int xen_copy_pct_data(struct acpi_pct_register *pct,
197 struct xen_pct_register *dst_pct)
199 /* It would be nice if you could just do 'memcpy(pct, dst_pct') but
200 * sadly the Xen structure did not have the proper padding so the
201 * descriptor field takes two (dst_pct) bytes instead of one (pct).
203 dst_pct->descriptor = pct->descriptor;
204 dst_pct->length = pct->length;
205 dst_pct->space_id = pct->space_id;
206 dst_pct->bit_width = pct->bit_width;
207 dst_pct->bit_offset = pct->bit_offset;
208 dst_pct->reserved = pct->reserved;
209 dst_pct->address = pct->address;
210 return 0;
212 static int push_pxx_to_hypervisor(struct acpi_processor *_pr)
214 int ret = 0;
215 struct xen_platform_op op = {
216 .cmd = XENPF_set_processor_pminfo,
217 .interface_version = XENPF_INTERFACE_VERSION,
218 .u.set_pminfo.id = _pr->acpi_id,
219 .u.set_pminfo.type = XEN_PM_PX,
221 struct xen_processor_performance *dst_perf;
222 struct xen_processor_px *dst_states = NULL;
224 dst_perf = &op.u.set_pminfo.perf;
226 dst_perf->platform_limit = _pr->performance_platform_limit;
227 dst_perf->flags |= XEN_PX_PPC;
228 xen_copy_pct_data(&(_pr->performance->control_register),
229 &dst_perf->control_register);
230 xen_copy_pct_data(&(_pr->performance->status_register),
231 &dst_perf->status_register);
232 dst_perf->flags |= XEN_PX_PCT;
233 dst_states = xen_copy_pss_data(_pr, dst_perf);
234 if (!IS_ERR_OR_NULL(dst_states)) {
235 set_xen_guest_handle(dst_perf->states, dst_states);
236 dst_perf->flags |= XEN_PX_PSS;
238 if (!xen_copy_psd_data(_pr, dst_perf))
239 dst_perf->flags |= XEN_PX_PSD;
241 if (dst_perf->flags != (XEN_PX_PSD | XEN_PX_PSS | XEN_PX_PCT | XEN_PX_PPC)) {
242 pr_warn("ACPI CPU%u missing some P-state data (%x), skipping\n",
243 _pr->acpi_id, dst_perf->flags);
244 ret = -ENODEV;
245 goto err_free;
248 if (!no_hypercall)
249 ret = HYPERVISOR_platform_op(&op);
251 if (!ret) {
252 struct acpi_processor_performance *perf;
253 unsigned int i;
255 perf = _pr->performance;
256 pr_debug("ACPI CPU%u - P-states uploaded.\n", _pr->acpi_id);
257 for (i = 0; i < perf->state_count; i++) {
258 pr_debug(" %cP%d: %d MHz, %d mW, %d uS\n",
259 (i == perf->state ? '*' : ' '), i,
260 (u32) perf->states[i].core_frequency,
261 (u32) perf->states[i].power,
262 (u32) perf->states[i].transition_latency);
264 } else if ((ret != -EINVAL) && (ret != -ENOSYS))
265 /* EINVAL means the ACPI ID is incorrect - meaning the ACPI
266 * table is referencing a non-existing CPU - which can happen
267 * with broken ACPI tables. */
268 pr_warn("(_PXX): Hypervisor error (%d) for ACPI CPU%u\n",
269 ret, _pr->acpi_id);
270 err_free:
271 if (!IS_ERR_OR_NULL(dst_states))
272 kfree(dst_states);
274 return ret;
276 static int upload_pm_data(struct acpi_processor *_pr)
278 int err = 0;
280 mutex_lock(&acpi_ids_mutex);
281 if (__test_and_set_bit(_pr->acpi_id, acpi_ids_done)) {
282 mutex_unlock(&acpi_ids_mutex);
283 return -EBUSY;
285 if (_pr->flags.power)
286 err = push_cxx_to_hypervisor(_pr);
288 if (_pr->performance && _pr->performance->states)
289 err |= push_pxx_to_hypervisor(_pr);
291 mutex_unlock(&acpi_ids_mutex);
292 return err;
294 static unsigned int __init get_max_acpi_id(void)
296 struct xenpf_pcpuinfo *info;
297 struct xen_platform_op op = {
298 .cmd = XENPF_get_cpuinfo,
299 .interface_version = XENPF_INTERFACE_VERSION,
301 int ret = 0;
302 unsigned int i, last_cpu, max_acpi_id = 0;
304 info = &op.u.pcpu_info;
305 info->xen_cpuid = 0;
307 ret = HYPERVISOR_platform_op(&op);
308 if (ret)
309 return NR_CPUS;
311 /* The max_present is the same irregardless of the xen_cpuid */
312 last_cpu = op.u.pcpu_info.max_present;
313 for (i = 0; i <= last_cpu; i++) {
314 info->xen_cpuid = i;
315 ret = HYPERVISOR_platform_op(&op);
316 if (ret)
317 continue;
318 max_acpi_id = max(info->acpi_id, max_acpi_id);
320 max_acpi_id *= 2; /* Slack for CPU hotplug support. */
321 pr_debug("Max ACPI ID: %u\n", max_acpi_id);
322 return max_acpi_id;
325 * The read_acpi_id and check_acpi_ids are there to support the Xen
326 * oddity of virtual CPUs != physical CPUs in the initial domain.
327 * The user can supply 'xen_max_vcpus=X' on the Xen hypervisor line
328 * which will band the amount of CPUs the initial domain can see.
329 * In general that is OK, except it plays havoc with any of the
330 * for_each_[present|online]_cpu macros which are banded to the virtual
331 * CPU amount.
333 static acpi_status
334 read_acpi_id(acpi_handle handle, u32 lvl, void *context, void **rv)
336 u32 acpi_id;
337 acpi_status status;
338 acpi_object_type acpi_type;
339 unsigned long long tmp;
340 union acpi_object object = { 0 };
341 struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
342 acpi_io_address pblk = 0;
344 status = acpi_get_type(handle, &acpi_type);
345 if (ACPI_FAILURE(status))
346 return AE_OK;
348 switch (acpi_type) {
349 case ACPI_TYPE_PROCESSOR:
350 status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
351 if (ACPI_FAILURE(status))
352 return AE_OK;
353 acpi_id = object.processor.proc_id;
354 pblk = object.processor.pblk_address;
355 break;
356 case ACPI_TYPE_DEVICE:
357 status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp);
358 if (ACPI_FAILURE(status))
359 return AE_OK;
360 acpi_id = tmp;
361 break;
362 default:
363 return AE_OK;
365 if (invalid_phys_cpuid(acpi_get_phys_id(handle,
366 acpi_type == ACPI_TYPE_DEVICE,
367 acpi_id))) {
368 pr_debug("CPU with ACPI ID %u is unavailable\n", acpi_id);
369 return AE_OK;
371 /* There are more ACPI Processor objects than in x2APIC or MADT.
372 * This can happen with incorrect ACPI SSDT declerations. */
373 if (acpi_id >= nr_acpi_bits) {
374 pr_debug("max acpi id %u, trying to set %u\n",
375 nr_acpi_bits - 1, acpi_id);
376 return AE_OK;
378 /* OK, There is a ACPI Processor object */
379 __set_bit(acpi_id, acpi_id_present);
381 pr_debug("ACPI CPU%u w/ PBLK:0x%lx\n", acpi_id, (unsigned long)pblk);
383 /* It has P-state dependencies */
384 if (!acpi_processor_get_psd(handle, &acpi_psd[acpi_id])) {
385 pr_debug("ACPI CPU%u w/ PST:coord_type = %llu domain = %llu\n",
386 acpi_id, acpi_psd[acpi_id].coord_type,
387 acpi_psd[acpi_id].domain);
390 status = acpi_evaluate_object(handle, "_CST", NULL, &buffer);
391 if (ACPI_FAILURE(status)) {
392 if (!pblk)
393 return AE_OK;
395 /* .. and it has a C-state */
396 __set_bit(acpi_id, acpi_id_cst_present);
398 return AE_OK;
400 static int check_acpi_ids(struct acpi_processor *pr_backup)
403 if (!pr_backup)
404 return -ENODEV;
406 if (acpi_id_present && acpi_id_cst_present)
407 /* OK, done this once .. skip to uploading */
408 goto upload;
410 /* All online CPUs have been processed at this stage. Now verify
411 * whether in fact "online CPUs" == physical CPUs.
413 acpi_id_present = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);
414 if (!acpi_id_present)
415 return -ENOMEM;
417 acpi_id_cst_present = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);
418 if (!acpi_id_cst_present) {
419 kfree(acpi_id_present);
420 return -ENOMEM;
423 acpi_psd = kcalloc(nr_acpi_bits, sizeof(struct acpi_psd_package),
424 GFP_KERNEL);
425 if (!acpi_psd) {
426 kfree(acpi_id_present);
427 kfree(acpi_id_cst_present);
428 return -ENOMEM;
431 acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
432 ACPI_UINT32_MAX,
433 read_acpi_id, NULL, NULL, NULL);
434 acpi_get_devices(ACPI_PROCESSOR_DEVICE_HID, read_acpi_id, NULL, NULL);
436 upload:
437 if (!bitmap_equal(acpi_id_present, acpi_ids_done, nr_acpi_bits)) {
438 unsigned int i;
439 for_each_set_bit(i, acpi_id_present, nr_acpi_bits) {
440 pr_backup->acpi_id = i;
441 /* Mask out C-states if there are no _CST or PBLK */
442 pr_backup->flags.power = test_bit(i, acpi_id_cst_present);
443 /* num_entries is non-zero if we evaluated _PSD */
444 if (acpi_psd[i].num_entries) {
445 memcpy(&pr_backup->performance->domain_info,
446 &acpi_psd[i],
447 sizeof(struct acpi_psd_package));
449 (void)upload_pm_data(pr_backup);
453 return 0;
456 /* acpi_perf_data is a pointer to percpu data. */
457 static struct acpi_processor_performance __percpu *acpi_perf_data;
459 static void free_acpi_perf_data(void)
461 unsigned int i;
463 /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */
464 for_each_possible_cpu(i)
465 free_cpumask_var(per_cpu_ptr(acpi_perf_data, i)
466 ->shared_cpu_map);
467 free_percpu(acpi_perf_data);
470 static int xen_upload_processor_pm_data(void)
472 struct acpi_processor *pr_backup = NULL;
473 unsigned int i;
474 int rc = 0;
476 pr_info("Uploading Xen processor PM info\n");
478 for_each_possible_cpu(i) {
479 struct acpi_processor *_pr;
480 _pr = per_cpu(processors, i /* APIC ID */);
481 if (!_pr)
482 continue;
484 if (!pr_backup) {
485 pr_backup = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
486 if (pr_backup)
487 memcpy(pr_backup, _pr, sizeof(struct acpi_processor));
489 (void)upload_pm_data(_pr);
492 rc = check_acpi_ids(pr_backup);
493 kfree(pr_backup);
495 return rc;
498 static void xen_acpi_processor_resume_worker(struct work_struct *dummy)
500 int rc;
502 bitmap_zero(acpi_ids_done, nr_acpi_bits);
504 rc = xen_upload_processor_pm_data();
505 if (rc != 0)
506 pr_info("ACPI data upload failed, error = %d\n", rc);
509 static void xen_acpi_processor_resume(void)
511 static DECLARE_WORK(wq, xen_acpi_processor_resume_worker);
514 * xen_upload_processor_pm_data() calls non-atomic code.
515 * However, the context for xen_acpi_processor_resume is syscore
516 * with only the boot CPU online and in an atomic context.
518 * So defer the upload for some point safer.
520 schedule_work(&wq);
523 static struct syscore_ops xap_syscore_ops = {
524 .resume = xen_acpi_processor_resume,
527 static int __init xen_acpi_processor_init(void)
529 unsigned int i;
530 int rc;
532 if (!xen_initial_domain())
533 return -ENODEV;
535 nr_acpi_bits = get_max_acpi_id() + 1;
536 acpi_ids_done = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);
537 if (!acpi_ids_done)
538 return -ENOMEM;
540 acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
541 if (!acpi_perf_data) {
542 pr_debug("Memory allocation error for acpi_perf_data\n");
543 kfree(acpi_ids_done);
544 return -ENOMEM;
546 for_each_possible_cpu(i) {
547 if (!zalloc_cpumask_var_node(
548 &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
549 GFP_KERNEL, cpu_to_node(i))) {
550 rc = -ENOMEM;
551 goto err_out;
555 /* Do initialization in ACPI core. It is OK to fail here. */
556 (void)acpi_processor_preregister_performance(acpi_perf_data);
558 for_each_possible_cpu(i) {
559 struct acpi_processor *pr;
560 struct acpi_processor_performance *perf;
562 pr = per_cpu(processors, i);
563 perf = per_cpu_ptr(acpi_perf_data, i);
564 if (!pr)
565 continue;
567 pr->performance = perf;
568 rc = acpi_processor_get_performance_info(pr);
569 if (rc)
570 goto err_out;
573 rc = xen_upload_processor_pm_data();
574 if (rc)
575 goto err_unregister;
577 register_syscore_ops(&xap_syscore_ops);
579 return 0;
580 err_unregister:
581 for_each_possible_cpu(i)
582 acpi_processor_unregister_performance(i);
584 err_out:
585 /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */
586 free_acpi_perf_data();
587 kfree(acpi_ids_done);
588 return rc;
590 static void __exit xen_acpi_processor_exit(void)
592 int i;
594 unregister_syscore_ops(&xap_syscore_ops);
595 kfree(acpi_ids_done);
596 kfree(acpi_id_present);
597 kfree(acpi_id_cst_present);
598 kfree(acpi_psd);
599 for_each_possible_cpu(i)
600 acpi_processor_unregister_performance(i);
602 free_acpi_perf_data();
605 MODULE_AUTHOR("Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>");
606 MODULE_DESCRIPTION("Xen ACPI Processor P-states (and Cx) driver which uploads PM data to Xen hypervisor");
607 MODULE_LICENSE("GPL");
609 /* We want to be loaded before the CPU freq scaling drivers are loaded.
610 * They are loaded in late_initcall. */
611 device_initcall(xen_acpi_processor_init);
612 module_exit(xen_acpi_processor_exit);