drivers/ata/sata_vsc.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
   4  *
   5  *  Maintained by:  Jeremy Higdon @ SGI
   6  *                  Please ALWAYS copy linux-ide@vger.kernel.org
   7  *                  on emails.
   8  *
   9  *  Copyright 2004 SGI
  10  *
  11  *  Bits from Jeff Garzik, Copyright RedHat, Inc.
  12  *
  13  *  libata documentation is available via 'make {ps|pdf}docs',
  14  *  as Documentation/driver-api/libata.rst
  15  *
  16  *  Vitesse hardware documentation presumably available under NDA.
  17  *  Intel 31244 (same hardware interface) documentation presumably
  18  *  available from http://developer.intel.com/
  19  */
  20
  21 #include <linux/kernel.h>
  22 #include <linux/module.h>
  23 #include <linux/pci.h>
  24 #include <linux/blkdev.h>
  25 #include <linux/delay.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/dma-mapping.h>
  28 #include <linux/device.h>
  29 #include <scsi/scsi_host.h>
  30 #include <linux/libata.h>
  31
  32 #define DRV_NAME        "sata_vsc"
  33 #define DRV_VERSION     "2.3"
  34
  35 enum {
  36         VSC_MMIO_BAR                    = 0,
  37
  38         /* Interrupt register offsets (from chip base address) */
  39         VSC_SATA_INT_STAT_OFFSET        = 0x00,
  40         VSC_SATA_INT_MASK_OFFSET        = 0x04,
  41
  42         /* Taskfile registers offsets */
  43         VSC_SATA_TF_CMD_OFFSET          = 0x00,
  44         VSC_SATA_TF_DATA_OFFSET         = 0x00,
  45         VSC_SATA_TF_ERROR_OFFSET        = 0x04,
  46         VSC_SATA_TF_FEATURE_OFFSET      = 0x06,
  47         VSC_SATA_TF_NSECT_OFFSET        = 0x08,
  48         VSC_SATA_TF_LBAL_OFFSET         = 0x0c,
  49         VSC_SATA_TF_LBAM_OFFSET         = 0x10,
  50         VSC_SATA_TF_LBAH_OFFSET         = 0x14,
  51         VSC_SATA_TF_DEVICE_OFFSET       = 0x18,
  52         VSC_SATA_TF_STATUS_OFFSET       = 0x1c,
  53         VSC_SATA_TF_COMMAND_OFFSET      = 0x1d,
  54         VSC_SATA_TF_ALTSTATUS_OFFSET    = 0x28,
  55         VSC_SATA_TF_CTL_OFFSET          = 0x29,
  56
  57         /* DMA base */
  58         VSC_SATA_UP_DESCRIPTOR_OFFSET   = 0x64,
  59         VSC_SATA_UP_DATA_BUFFER_OFFSET  = 0x6C,
  60         VSC_SATA_DMA_CMD_OFFSET         = 0x70,
  61
  62         /* SCRs base */
  63         VSC_SATA_SCR_STATUS_OFFSET      = 0x100,
  64         VSC_SATA_SCR_ERROR_OFFSET       = 0x104,
  65         VSC_SATA_SCR_CONTROL_OFFSET     = 0x108,
  66
  67         /* Port stride */
  68         VSC_SATA_PORT_OFFSET            = 0x200,
  69
  70         /* Error interrupt status bit offsets */
  71         VSC_SATA_INT_ERROR_CRC          = 0x40,
  72         VSC_SATA_INT_ERROR_T            = 0x20,
  73         VSC_SATA_INT_ERROR_P            = 0x10,
  74         VSC_SATA_INT_ERROR_R            = 0x8,
  75         VSC_SATA_INT_ERROR_E            = 0x4,
  76         VSC_SATA_INT_ERROR_M            = 0x2,
  77         VSC_SATA_INT_PHY_CHANGE         = 0x1,
  78         VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC  | VSC_SATA_INT_ERROR_T | \
  79                               VSC_SATA_INT_ERROR_P    | VSC_SATA_INT_ERROR_R | \
  80                               VSC_SATA_INT_ERROR_E    | VSC_SATA_INT_ERROR_M | \
  81                               VSC_SATA_INT_PHY_CHANGE),
  82 };
  83
  84 static int vsc_sata_scr_read(struct ata_link *link,
  85                              unsigned int sc_reg, u32 *val)
  86 {
  87         if (sc_reg > SCR_CONTROL)
  88                 return -EINVAL;
  89         *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
  90         return 0;
  91 }
  92
  93
  94 static int vsc_sata_scr_write(struct ata_link *link,
  95                               unsigned int sc_reg, u32 val)
  96 {
  97         if (sc_reg > SCR_CONTROL)
  98                 return -EINVAL;
  99         writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
 100         return 0;
 101 }
 102
 103
 104 static void vsc_freeze(struct ata_port *ap)
 105 {
 106         void __iomem *mask_addr;
 107
 108         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 109                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 110
 111         writeb(0, mask_addr);
 112 }
 113
 114
 115 static void vsc_thaw(struct ata_port *ap)
 116 {
 117         void __iomem *mask_addr;
 118
 119         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 120                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 121
 122         writeb(0xff, mask_addr);
 123 }
 124
 125
 126 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
 127 {
 128         void __iomem *mask_addr;
 129         u8 mask;
 130
 131         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 132                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 133         mask = readb(mask_addr);
 134         if (ctl & ATA_NIEN)
 135                 mask |= 0x80;
 136         else
 137                 mask &= 0x7F;
 138         writeb(mask, mask_addr);
 139 }
 140
 141
 142 static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 143 {
 144         struct ata_ioports *ioaddr = &ap->ioaddr;
 145         unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
 146
 147         /*
 148          * The only thing the ctl register is used for is SRST.
 149          * That is not enabled or disabled via tf_load.
 150          * However, if ATA_NIEN is changed, then we need to change
 151          * the interrupt register.
 152          */
 153         if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
 154                 ap->last_ctl = tf->ctl;
 155                 vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
 156         }
 157         if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
 158                 writew(tf->feature | (((u16)tf->hob_feature) << 8),
 159                        ioaddr->feature_addr);
 160                 writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
 161                        ioaddr->nsect_addr);
 162                 writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
 163                        ioaddr->lbal_addr);
 164                 writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
 165                        ioaddr->lbam_addr);
 166                 writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
 167                        ioaddr->lbah_addr);
 168         } else if (is_addr) {
 169                 writew(tf->feature, ioaddr->feature_addr);
 170                 writew(tf->nsect, ioaddr->nsect_addr);
 171                 writew(tf->lbal, ioaddr->lbal_addr);
 172                 writew(tf->lbam, ioaddr->lbam_addr);
 173                 writew(tf->lbah, ioaddr->lbah_addr);
 174         }
 175
 176         if (tf->flags & ATA_TFLAG_DEVICE)
 177                 writeb(tf->device, ioaddr->device_addr);
 178
 179         ata_wait_idle(ap);
 180 }
 181
 182
 183 static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 184 {
 185         struct ata_ioports *ioaddr = &ap->ioaddr;
 186         u16 nsect, lbal, lbam, lbah, feature;
 187
 188         tf->command = ata_sff_check_status(ap);
 189         tf->device = readw(ioaddr->device_addr);
 190         feature = readw(ioaddr->error_addr);
 191         nsect = readw(ioaddr->nsect_addr);
 192         lbal = readw(ioaddr->lbal_addr);
 193         lbam = readw(ioaddr->lbam_addr);
 194         lbah = readw(ioaddr->lbah_addr);
 195
 196         tf->feature = feature;
 197         tf->nsect = nsect;
 198         tf->lbal = lbal;
 199         tf->lbam = lbam;
 200         tf->lbah = lbah;
 201
 202         if (tf->flags & ATA_TFLAG_LBA48) {
 203                 tf->hob_feature = feature >> 8;
 204                 tf->hob_nsect = nsect >> 8;
 205                 tf->hob_lbal = lbal >> 8;
 206                 tf->hob_lbam = lbam >> 8;
 207                 tf->hob_lbah = lbah >> 8;
 208         }
 209 }
 210
 211 static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
 212 {
 213         if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
 214                 ata_port_freeze(ap);
 215         else
 216                 ata_port_abort(ap);
 217 }
 218
 219 static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 220 {
 221         struct ata_queued_cmd *qc;
 222         int handled = 0;
 223
 224         if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
 225                 vsc_error_intr(port_status, ap);
 226                 return;
 227         }
 228
 229         qc = ata_qc_from_tag(ap, ap->link.active_tag);
 230         if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
 231                 handled = ata_bmdma_port_intr(ap, qc);
 232
 233         /* We received an interrupt during a polled command,
 234          * or some other spurious condition.  Interrupt reporting
 235          * with this hardware is fairly reliable so it is safe to
 236          * simply clear the interrupt
 237          */
 238         if (unlikely(!handled))
 239                 ap->ops->sff_check_status(ap);
 240 }
 241
 242 /*
 243  * vsc_sata_interrupt
 244  *
 245  * Read the interrupt register and process for the devices that have
 246  * them pending.
 247  */
 248 static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
 249 {
 250         struct ata_host *host = dev_instance;
 251         unsigned int i;
 252         unsigned int handled = 0;
 253         u32 status;
 254
 255         status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
 256
 257         if (unlikely(status == 0xffffffff || status == 0)) {
 258                 if (status)
 259                         dev_err(host->dev,
 260                                 ": IRQ status == 0xffffffff, PCI fault or device removal?\n");
 261                 goto out;
 262         }
 263
 264         spin_lock(&host->lock);
 265
 266         for (i = 0; i < host->n_ports; i++) {
 267                 u8 port_status = (status >> (8 * i)) & 0xff;
 268                 if (port_status) {
 269                         vsc_port_intr(port_status, host->ports[i]);
 270                         handled++;
 271                 }
 272         }
 273
 274         spin_unlock(&host->lock);
 275 out:
 276         return IRQ_RETVAL(handled);
 277 }
 278
 279
 280 static struct scsi_host_template vsc_sata_sht = {
 281         ATA_BMDMA_SHT(DRV_NAME),
 282 };
 283
 284
 285 static struct ata_port_operations vsc_sata_ops = {
 286         .inherits               = &ata_bmdma_port_ops,
 287         /* The IRQ handling is not quite standard SFF behaviour so we
 288            cannot use the default lost interrupt handler */
 289         .lost_interrupt         = ATA_OP_NULL,
 290         .sff_tf_load            = vsc_sata_tf_load,
 291         .sff_tf_read            = vsc_sata_tf_read,
 292         .freeze                 = vsc_freeze,
 293         .thaw                   = vsc_thaw,
 294         .scr_read               = vsc_sata_scr_read,
 295         .scr_write              = vsc_sata_scr_write,
 296 };
 297
 298 static void vsc_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 299 {
 300         port->cmd_addr          = base + VSC_SATA_TF_CMD_OFFSET;
 301         port->data_addr         = base + VSC_SATA_TF_DATA_OFFSET;
 302         port->error_addr        = base + VSC_SATA_TF_ERROR_OFFSET;
 303         port->feature_addr      = base + VSC_SATA_TF_FEATURE_OFFSET;
 304         port->nsect_addr        = base + VSC_SATA_TF_NSECT_OFFSET;
 305         port->lbal_addr         = base + VSC_SATA_TF_LBAL_OFFSET;
 306         port->lbam_addr         = base + VSC_SATA_TF_LBAM_OFFSET;
 307         port->lbah_addr         = base + VSC_SATA_TF_LBAH_OFFSET;
 308         port->device_addr       = base + VSC_SATA_TF_DEVICE_OFFSET;
 309         port->status_addr       = base + VSC_SATA_TF_STATUS_OFFSET;
 310         port->command_addr      = base + VSC_SATA_TF_COMMAND_OFFSET;
 311         port->altstatus_addr    = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
 312         port->ctl_addr          = base + VSC_SATA_TF_CTL_OFFSET;
 313         port->bmdma_addr        = base + VSC_SATA_DMA_CMD_OFFSET;
 314         port->scr_addr          = base + VSC_SATA_SCR_STATUS_OFFSET;
 315         writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
 316         writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
 317 }
 318
 319
 320 static int vsc_sata_init_one(struct pci_dev *pdev,
 321                              const struct pci_device_id *ent)
 322 {
 323         static const struct ata_port_info pi = {
 324                 .flags          = ATA_FLAG_SATA,
 325                 .pio_mask       = ATA_PIO4,
 326                 .mwdma_mask     = ATA_MWDMA2,
 327                 .udma_mask      = ATA_UDMA6,
 328                 .port_ops       = &vsc_sata_ops,
 329         };
 330         const struct ata_port_info *ppi[] = { &pi, NULL };
 331         struct ata_host *host;
 332         void __iomem *mmio_base;
 333         int i, rc;
 334         u8 cls;
 335
 336         ata_print_version_once(&pdev->dev, DRV_VERSION);
 337
 338         /* allocate host */
 339         host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
 340         if (!host)
 341                 return -ENOMEM;
 342
 343         rc = pcim_enable_device(pdev);
 344         if (rc)
 345                 return rc;
 346
 347         /* check if we have needed resource mapped */
 348         if (pci_resource_len(pdev, 0) == 0)
 349                 return -ENODEV;
 350
 351         /* map IO regions and initialize host accordingly */
 352         rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
 353         if (rc == -EBUSY)
 354                 pcim_pin_device(pdev);
 355         if (rc)
 356                 return rc;
 357         host->iomap = pcim_iomap_table(pdev);
 358
 359         mmio_base = host->iomap[VSC_MMIO_BAR];
 360
 361         for (i = 0; i < host->n_ports; i++) {
 362                 struct ata_port *ap = host->ports[i];
 363                 unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
 364
 365                 vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
 366
 367                 ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
 368                 ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
 369         }
 370
 371         /*
 372          * Use 32 bit DMA mask, because 64 bit address support is poor.
 373          */
 374         rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 375         if (rc)
 376                 return rc;
 377
 378         /*
 379          * Due to a bug in the chip, the default cache line size can't be
 380          * used (unless the default is non-zero).
 381          */
 382         pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
 383         if (cls == 0x00)
 384                 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
 385
 386         if (pci_enable_msi(pdev) == 0)
 387                 pci_intx(pdev, 0);
 388
 389         /*
 390          * Config offset 0x98 is "Extended Control and Status Register 0"
 391          * Default value is (1 << 28).  All bits except bit 28 are reserved in
 392          * DPA mode.  If bit 28 is set, LED 0 reflects all ports' activity.
 393          * If bit 28 is clear, each port has its own LED.
 394          */
 395         pci_write_config_dword(pdev, 0x98, 0);
 396
 397         pci_set_master(pdev);
 398         return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
 399                                  IRQF_SHARED, &vsc_sata_sht);
 400 }
 401
 402 static const struct pci_device_id vsc_sata_pci_tbl[] = {
 403         { PCI_VENDOR_ID_VITESSE, 0x7174,
 404           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
 405         { PCI_VENDOR_ID_INTEL, 0x3200,
 406           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
 407
 408         { }     /* terminate list */
 409 };
 410
 411 static struct pci_driver vsc_sata_pci_driver = {
 412         .name                   = DRV_NAME,
 413         .id_table               = vsc_sata_pci_tbl,
 414         .probe                  = vsc_sata_init_one,
 415         .remove                 = ata_pci_remove_one,
 416 };
 417
 418 module_pci_driver(vsc_sata_pci_driver);
 419
 420 MODULE_AUTHOR("Jeremy Higdon");
 421 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
 422 MODULE_LICENSE("GPL");
 423 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
 424 MODULE_VERSION(DRV_VERSION);