1 // SPDX-License-Identifier: GPL-2.0-or-later
3 cx231xx-video.c - driver for Conexant Cx23100/101/102
4 USB video capture devices
6 Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
8 Based on cx23885 driver
14 #include <linux/init.h>
15 #include <linux/list.h>
16 #include <linux/module.h>
17 #include <linux/kernel.h>
18 #include <linux/bitmap.h>
19 #include <linux/i2c.h>
21 #include <linux/mutex.h>
22 #include <linux/slab.h>
24 #include <media/v4l2-common.h>
25 #include <media/v4l2-ioctl.h>
26 #include <media/v4l2-event.h>
27 #include <media/drv-intf/msp3400.h>
28 #include <media/tuner.h>
30 #include <media/dvb_frontend.h>
32 #include "cx231xx-vbi.h"
34 #define CX231XX_VERSION "0.0.3"
36 #define DRIVER_AUTHOR "Srinivasa Deevi <srinivasa.deevi@conexant.com>"
37 #define DRIVER_DESC "Conexant cx231xx based USB video device driver"
39 #define cx231xx_videodbg(fmt, arg...) do {\
41 printk(KERN_INFO "%s %s :"fmt, \
42 dev->name, __func__ , ##arg); } while (0)
44 static unsigned int isoc_debug
;
45 module_param(isoc_debug
, int, 0644);
46 MODULE_PARM_DESC(isoc_debug
, "enable debug messages [isoc transfers]");
48 #define cx231xx_isocdbg(fmt, arg...) \
51 printk(KERN_INFO "%s %s :"fmt, \
52 dev->name, __func__ , ##arg); \
56 MODULE_AUTHOR(DRIVER_AUTHOR
);
57 MODULE_DESCRIPTION(DRIVER_DESC
);
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(CX231XX_VERSION
);
61 static unsigned int card
[] = {[0 ... (CX231XX_MAXBOARDS
- 1)] = -1U };
62 static unsigned int video_nr
[] = {[0 ... (CX231XX_MAXBOARDS
- 1)] = -1U };
63 static unsigned int vbi_nr
[] = {[0 ... (CX231XX_MAXBOARDS
- 1)] = -1U };
64 static unsigned int radio_nr
[] = {[0 ... (CX231XX_MAXBOARDS
- 1)] = -1U };
66 module_param_array(card
, int, NULL
, 0444);
67 module_param_array(video_nr
, int, NULL
, 0444);
68 module_param_array(vbi_nr
, int, NULL
, 0444);
69 module_param_array(radio_nr
, int, NULL
, 0444);
71 MODULE_PARM_DESC(card
, "card type");
72 MODULE_PARM_DESC(video_nr
, "video device numbers");
73 MODULE_PARM_DESC(vbi_nr
, "vbi device numbers");
74 MODULE_PARM_DESC(radio_nr
, "radio device numbers");
76 static unsigned int video_debug
;
77 module_param(video_debug
, int, 0644);
78 MODULE_PARM_DESC(video_debug
, "enable debug messages [video]");
80 /* supported video standards */
81 static struct cx231xx_fmt format
[] = {
83 .fourcc
= V4L2_PIX_FMT_YUYV
,
90 static int cx231xx_enable_analog_tuner(struct cx231xx
*dev
)
92 #ifdef CONFIG_MEDIA_CONTROLLER
93 struct media_device
*mdev
= dev
->media_dev
;
94 struct media_entity
*entity
, *decoder
= NULL
, *source
;
95 struct media_link
*link
, *found_link
= NULL
;
96 int ret
, active_links
= 0;
102 * This will find the tuner that is connected into the decoder.
103 * Technically, this is not 100% correct, as the device may be
104 * using an analog input instead of the tuner. However, as we can't
105 * do DVB streaming while the DMA engine is being used for V4L2,
106 * this should be enough for the actual needs.
108 media_device_for_each_entity(entity
, mdev
) {
109 if (entity
->function
== MEDIA_ENT_F_ATV_DECODER
) {
117 list_for_each_entry(link
, &decoder
->links
, list
) {
118 if (link
->sink
->entity
== decoder
) {
120 if (link
->flags
& MEDIA_LNK_FL_ENABLED
)
126 if (active_links
== 1 || !found_link
)
129 source
= found_link
->source
->entity
;
130 list_for_each_entry(link
, &source
->links
, list
) {
131 struct media_entity
*sink
;
134 sink
= link
->sink
->entity
;
137 flags
= MEDIA_LNK_FL_ENABLED
;
139 ret
= media_entity_setup_link(link
, flags
);
142 "Couldn't change link %s->%s to %s. Error %d\n",
143 source
->name
, sink
->name
,
144 flags
? "enabled" : "disabled",
149 "link %s->%s was %s\n",
150 source
->name
, sink
->name
,
151 flags
? "ENABLED" : "disabled");
157 /* ------------------------------------------------------------------
158 Video buffer and parser functions
159 ------------------------------------------------------------------*/
162 * Announces that a buffer were filled and request the next
164 static inline void buffer_filled(struct cx231xx
*dev
,
165 struct cx231xx_dmaqueue
*dma_q
,
166 struct cx231xx_buffer
*buf
)
168 /* Advice that buffer was filled */
169 cx231xx_isocdbg("[%p/%d] wakeup\n", buf
, buf
->vb
.vb2_buf
.index
);
170 buf
->vb
.sequence
= dma_q
->sequence
++;
171 buf
->vb
.field
= V4L2_FIELD_INTERLACED
;
172 buf
->vb
.vb2_buf
.timestamp
= ktime_get_ns();
173 vb2_set_plane_payload(&buf
->vb
.vb2_buf
, 0, dev
->size
);
176 dev
->video_mode
.isoc_ctl
.buf
= NULL
;
178 dev
->video_mode
.bulk_ctl
.buf
= NULL
;
180 list_del(&buf
->list
);
181 vb2_buffer_done(&buf
->vb
.vb2_buf
, VB2_BUF_STATE_DONE
);
184 static inline void print_err_status(struct cx231xx
*dev
, int packet
, int status
)
186 char *errmsg
= "Unknown";
190 errmsg
= "unlinked synchronously";
193 errmsg
= "unlinked asynchronously";
196 errmsg
= "Buffer error (overrun)";
199 errmsg
= "Stalled (device not responding)";
202 errmsg
= "Babble (bad cable?)";
205 errmsg
= "Bit-stuff error (bad cable?)";
208 errmsg
= "CRC/Timeout (could be anything)";
211 errmsg
= "Device does not respond";
215 cx231xx_isocdbg("URB status %d [%s].\n", status
, errmsg
);
217 cx231xx_isocdbg("URB packet %d, status %d [%s].\n",
218 packet
, status
, errmsg
);
223 * video-buf generic routine to get the next available buffer
225 static inline void get_next_buf(struct cx231xx_dmaqueue
*dma_q
,
226 struct cx231xx_buffer
**buf
)
228 struct cx231xx_video_mode
*vmode
=
229 container_of(dma_q
, struct cx231xx_video_mode
, vidq
);
230 struct cx231xx
*dev
= container_of(vmode
, struct cx231xx
, video_mode
);
234 if (list_empty(&dma_q
->active
)) {
235 cx231xx_isocdbg("No active queue to serve\n");
237 dev
->video_mode
.isoc_ctl
.buf
= NULL
;
239 dev
->video_mode
.bulk_ctl
.buf
= NULL
;
244 /* Get the next buffer */
245 *buf
= list_entry(dma_q
->active
.next
, struct cx231xx_buffer
, list
);
247 /* Cleans up buffer - Useful for testing for frame/URB loss */
248 outp
= vb2_plane_vaddr(&(*buf
)->vb
.vb2_buf
, 0);
249 memset(outp
, 0, dev
->size
);
252 dev
->video_mode
.isoc_ctl
.buf
= *buf
;
254 dev
->video_mode
.bulk_ctl
.buf
= *buf
;
260 * Controls the isoc copy of each urb packet
262 static inline int cx231xx_isoc_copy(struct cx231xx
*dev
, struct urb
*urb
)
264 struct cx231xx_dmaqueue
*dma_q
= urb
->context
;
266 unsigned char *p_buffer
;
267 u32 bytes_parsed
= 0, buffer_size
= 0;
273 if (dev
->state
& DEV_DISCONNECTED
)
276 if (urb
->status
< 0) {
277 print_err_status(dev
, -1, urb
->status
);
278 if (urb
->status
== -ENOENT
)
282 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
283 int status
= urb
->iso_frame_desc
[i
].status
;
286 print_err_status(dev
, i
, status
);
287 if (urb
->iso_frame_desc
[i
].status
!= -EPROTO
)
291 if (urb
->iso_frame_desc
[i
].actual_length
<= 0) {
292 /* cx231xx_isocdbg("packet %d is empty",i); - spammy */
295 if (urb
->iso_frame_desc
[i
].actual_length
>
296 dev
->video_mode
.max_pkt_size
) {
297 cx231xx_isocdbg("packet bigger than packet size");
301 /* get buffer pointer and length */
302 p_buffer
= urb
->transfer_buffer
+ urb
->iso_frame_desc
[i
].offset
;
303 buffer_size
= urb
->iso_frame_desc
[i
].actual_length
;
306 if (dma_q
->is_partial_line
) {
307 /* Handle the case of a partial line */
308 sav_eav
= dma_q
->last_sav
;
310 /* Check for a SAV/EAV overlapping
311 the buffer boundary */
313 cx231xx_find_boundary_SAV_EAV(p_buffer
,
319 /* Get the first line if we have some portion of an SAV/EAV from
320 the last buffer or a partial line */
322 bytes_parsed
+= cx231xx_get_video_line(dev
, dma_q
,
323 sav_eav
, /* SAV/EAV */
324 p_buffer
+ bytes_parsed
, /* p_buffer */
325 buffer_size
- bytes_parsed
);/* buf size */
328 /* Now parse data that is completely in this buffer */
329 /* dma_q->is_partial_line = 0; */
331 while (bytes_parsed
< buffer_size
) {
334 sav_eav
= cx231xx_find_next_SAV_EAV(
335 p_buffer
+ bytes_parsed
, /* p_buffer */
336 buffer_size
- bytes_parsed
, /* buf size */
337 &bytes_used
);/* bytes used to get SAV/EAV */
339 bytes_parsed
+= bytes_used
;
342 if (sav_eav
&& (bytes_parsed
< buffer_size
)) {
343 bytes_parsed
+= cx231xx_get_video_line(dev
,
344 dma_q
, sav_eav
, /* SAV/EAV */
345 p_buffer
+ bytes_parsed
,/* p_buffer */
346 buffer_size
- bytes_parsed
);/*buf size*/
350 /* Save the last four bytes of the buffer so we can check the
351 buffer boundary condition next time */
352 memcpy(dma_q
->partial_buf
, p_buffer
+ buffer_size
- 4, 4);
359 static inline int cx231xx_bulk_copy(struct cx231xx
*dev
, struct urb
*urb
)
361 struct cx231xx_dmaqueue
*dma_q
= urb
->context
;
362 unsigned char *p_buffer
;
363 u32 bytes_parsed
= 0, buffer_size
= 0;
369 if (dev
->state
& DEV_DISCONNECTED
)
372 if (urb
->status
< 0) {
373 print_err_status(dev
, -1, urb
->status
);
374 if (urb
->status
== -ENOENT
)
380 /* get buffer pointer and length */
381 p_buffer
= urb
->transfer_buffer
;
382 buffer_size
= urb
->actual_length
;
385 if (dma_q
->is_partial_line
) {
386 /* Handle the case of a partial line */
387 sav_eav
= dma_q
->last_sav
;
389 /* Check for a SAV/EAV overlapping
390 the buffer boundary */
392 cx231xx_find_boundary_SAV_EAV(p_buffer
,
398 /* Get the first line if we have some portion of an SAV/EAV from
399 the last buffer or a partial line */
401 bytes_parsed
+= cx231xx_get_video_line(dev
, dma_q
,
402 sav_eav
, /* SAV/EAV */
403 p_buffer
+ bytes_parsed
, /* p_buffer */
404 buffer_size
- bytes_parsed
);/* buf size */
407 /* Now parse data that is completely in this buffer */
408 /* dma_q->is_partial_line = 0; */
410 while (bytes_parsed
< buffer_size
) {
413 sav_eav
= cx231xx_find_next_SAV_EAV(
414 p_buffer
+ bytes_parsed
, /* p_buffer */
415 buffer_size
- bytes_parsed
, /* buf size */
416 &bytes_used
);/* bytes used to get SAV/EAV */
418 bytes_parsed
+= bytes_used
;
421 if (sav_eav
&& (bytes_parsed
< buffer_size
)) {
422 bytes_parsed
+= cx231xx_get_video_line(dev
,
423 dma_q
, sav_eav
, /* SAV/EAV */
424 p_buffer
+ bytes_parsed
,/* p_buffer */
425 buffer_size
- bytes_parsed
);/*buf size*/
429 /* Save the last four bytes of the buffer so we can check the
430 buffer boundary condition next time */
431 memcpy(dma_q
->partial_buf
, p_buffer
+ buffer_size
- 4, 4);
439 u8
cx231xx_find_boundary_SAV_EAV(u8
*p_buffer
, u8
*partial_buf
,
443 u8 boundary_bytes
[8];
448 /* Create an array of the last 4 bytes of the last buffer and the first
449 4 bytes of the current buffer. */
451 memcpy(boundary_bytes
, partial_buf
, 4);
452 memcpy(boundary_bytes
+ 4, p_buffer
, 4);
454 /* Check for the SAV/EAV in the boundary buffer */
455 sav_eav
= cx231xx_find_next_SAV_EAV((u8
*)&boundary_bytes
, 8,
459 /* found a boundary SAV/EAV. Updates the bytes used to reflect
460 only those used in the new buffer */
461 *p_bytes_used
= bytes_used
- 4;
467 u8
cx231xx_find_next_SAV_EAV(u8
*p_buffer
, u32 buffer_size
, u32
*p_bytes_used
)
473 * Don't search if the buffer size is less than 4. It causes a page
474 * fault since buffer_size - 4 evaluates to a large number in that
477 if (buffer_size
< 4) {
478 *p_bytes_used
= buffer_size
;
482 for (i
= 0; i
< (buffer_size
- 3); i
++) {
484 if ((p_buffer
[i
] == 0xFF) &&
485 (p_buffer
[i
+ 1] == 0x00) && (p_buffer
[i
+ 2] == 0x00)) {
487 *p_bytes_used
= i
+ 4;
488 sav_eav
= p_buffer
[i
+ 3];
493 *p_bytes_used
= buffer_size
;
497 u32
cx231xx_get_video_line(struct cx231xx
*dev
,
498 struct cx231xx_dmaqueue
*dma_q
, u8 sav_eav
,
499 u8
*p_buffer
, u32 buffer_size
)
501 u32 bytes_copied
= 0;
502 int current_field
= -1;
505 case SAV_ACTIVE_VIDEO_FIELD1
:
506 /* looking for skipped line which occurred in PAL 720x480 mode.
507 In this case, there will be no active data contained
508 between the SAV and EAV */
509 if ((buffer_size
> 3) && (p_buffer
[0] == 0xFF) &&
510 (p_buffer
[1] == 0x00) && (p_buffer
[2] == 0x00) &&
511 ((p_buffer
[3] == EAV_ACTIVE_VIDEO_FIELD1
) ||
512 (p_buffer
[3] == EAV_ACTIVE_VIDEO_FIELD2
) ||
513 (p_buffer
[3] == EAV_VBLANK_FIELD1
) ||
514 (p_buffer
[3] == EAV_VBLANK_FIELD2
)))
519 case SAV_ACTIVE_VIDEO_FIELD2
:
520 /* looking for skipped line which occurred in PAL 720x480 mode.
521 In this case, there will be no active data contained between
523 if ((buffer_size
> 3) && (p_buffer
[0] == 0xFF) &&
524 (p_buffer
[1] == 0x00) && (p_buffer
[2] == 0x00) &&
525 ((p_buffer
[3] == EAV_ACTIVE_VIDEO_FIELD1
) ||
526 (p_buffer
[3] == EAV_ACTIVE_VIDEO_FIELD2
) ||
527 (p_buffer
[3] == EAV_VBLANK_FIELD1
) ||
528 (p_buffer
[3] == EAV_VBLANK_FIELD2
)))
534 dma_q
->last_sav
= sav_eav
;
536 bytes_copied
= cx231xx_copy_video_line(dev
, dma_q
, p_buffer
,
537 buffer_size
, current_field
);
542 u32
cx231xx_copy_video_line(struct cx231xx
*dev
,
543 struct cx231xx_dmaqueue
*dma_q
, u8
*p_line
,
544 u32 length
, int field_number
)
547 struct cx231xx_buffer
*buf
;
548 u32 _line_size
= dev
->width
* 2;
550 if (dma_q
->current_field
!= field_number
)
551 cx231xx_reset_video_buffer(dev
, dma_q
);
553 /* get the buffer pointer */
555 buf
= dev
->video_mode
.isoc_ctl
.buf
;
557 buf
= dev
->video_mode
.bulk_ctl
.buf
;
559 /* Remember the field number for next time */
560 dma_q
->current_field
= field_number
;
562 bytes_to_copy
= dma_q
->bytes_left_in_line
;
563 if (bytes_to_copy
> length
)
564 bytes_to_copy
= length
;
566 if (dma_q
->lines_completed
>= dma_q
->lines_per_field
) {
567 dma_q
->bytes_left_in_line
-= bytes_to_copy
;
568 dma_q
->is_partial_line
= (dma_q
->bytes_left_in_line
== 0) ?
573 dma_q
->is_partial_line
= 1;
575 /* If we don't have a buffer, just return the number of bytes we would
576 have copied if we had a buffer. */
578 dma_q
->bytes_left_in_line
-= bytes_to_copy
;
579 dma_q
->is_partial_line
= (dma_q
->bytes_left_in_line
== 0)
581 return bytes_to_copy
;
584 /* copy the data to video buffer */
585 cx231xx_do_copy(dev
, dma_q
, p_line
, bytes_to_copy
);
587 dma_q
->pos
+= bytes_to_copy
;
588 dma_q
->bytes_left_in_line
-= bytes_to_copy
;
590 if (dma_q
->bytes_left_in_line
== 0) {
591 dma_q
->bytes_left_in_line
= _line_size
;
592 dma_q
->lines_completed
++;
593 dma_q
->is_partial_line
= 0;
595 if (cx231xx_is_buffer_done(dev
, dma_q
) && buf
) {
596 buffer_filled(dev
, dma_q
, buf
);
600 dma_q
->lines_completed
= 0;
604 return bytes_to_copy
;
607 void cx231xx_reset_video_buffer(struct cx231xx
*dev
,
608 struct cx231xx_dmaqueue
*dma_q
)
610 struct cx231xx_buffer
*buf
;
612 /* handle the switch from field 1 to field 2 */
613 if (dma_q
->current_field
== 1) {
614 if (dma_q
->lines_completed
>= dma_q
->lines_per_field
)
615 dma_q
->field1_done
= 1;
617 dma_q
->field1_done
= 0;
621 buf
= dev
->video_mode
.isoc_ctl
.buf
;
623 buf
= dev
->video_mode
.bulk_ctl
.buf
;
626 /* first try to get the buffer */
627 get_next_buf(dma_q
, &buf
);
630 dma_q
->field1_done
= 0;
631 dma_q
->current_field
= -1;
634 /* reset the counters */
635 dma_q
->bytes_left_in_line
= dev
->width
<< 1;
636 dma_q
->lines_completed
= 0;
639 int cx231xx_do_copy(struct cx231xx
*dev
, struct cx231xx_dmaqueue
*dma_q
,
640 u8
*p_buffer
, u32 bytes_to_copy
)
642 u8
*p_out_buffer
= NULL
;
643 u32 current_line_bytes_copied
= 0;
644 struct cx231xx_buffer
*buf
;
645 u32 _line_size
= dev
->width
<< 1;
650 buf
= dev
->video_mode
.isoc_ctl
.buf
;
652 buf
= dev
->video_mode
.bulk_ctl
.buf
;
657 p_out_buffer
= vb2_plane_vaddr(&buf
->vb
.vb2_buf
, 0);
659 current_line_bytes_copied
= _line_size
- dma_q
->bytes_left_in_line
;
661 /* Offset field 2 one line from the top of the buffer */
662 offset
= (dma_q
->current_field
== 1) ? 0 : _line_size
;
664 /* Offset for field 2 */
665 startwrite
= p_out_buffer
+ offset
;
667 /* lines already completed in the current field */
668 startwrite
+= (dma_q
->lines_completed
* _line_size
* 2);
670 /* bytes already completed in the current line */
671 startwrite
+= current_line_bytes_copied
;
673 lencopy
= dma_q
->bytes_left_in_line
> bytes_to_copy
?
674 bytes_to_copy
: dma_q
->bytes_left_in_line
;
676 if ((u8
*)(startwrite
+ lencopy
) > (u8
*)(p_out_buffer
+ dev
->size
))
679 /* The below copies the UYVY data straight into video buffer */
680 cx231xx_swab((u16
*) p_buffer
, (u16
*) startwrite
, (u16
) lencopy
);
685 void cx231xx_swab(u16
*from
, u16
*to
, u16 len
)
692 for (i
= 0; i
< len
/ 2; i
++)
693 to
[i
] = (from
[i
] << 8) | (from
[i
] >> 8);
696 u8
cx231xx_is_buffer_done(struct cx231xx
*dev
, struct cx231xx_dmaqueue
*dma_q
)
698 u8 buffer_complete
= 0;
700 /* Dual field stream */
701 buffer_complete
= ((dma_q
->current_field
== 2) &&
702 (dma_q
->lines_completed
>= dma_q
->lines_per_field
) &&
705 return buffer_complete
;
708 /* ------------------------------------------------------------------
710 ------------------------------------------------------------------*/
712 static int queue_setup(struct vb2_queue
*vq
,
713 unsigned int *nbuffers
, unsigned int *nplanes
,
714 unsigned int sizes
[], struct device
*alloc_devs
[])
716 struct cx231xx
*dev
= vb2_get_drv_priv(vq
);
718 dev
->size
= (dev
->width
* dev
->height
* dev
->format
->depth
+ 7) >> 3;
720 if (vq
->num_buffers
+ *nbuffers
< CX231XX_MIN_BUF
)
721 *nbuffers
= CX231XX_MIN_BUF
- vq
->num_buffers
;
724 return sizes
[0] < dev
->size
? -EINVAL
: 0;
726 sizes
[0] = dev
->size
;
731 static void buffer_queue(struct vb2_buffer
*vb
)
733 struct cx231xx_buffer
*buf
=
734 container_of(vb
, struct cx231xx_buffer
, vb
.vb2_buf
);
735 struct cx231xx
*dev
= vb2_get_drv_priv(vb
->vb2_queue
);
736 struct cx231xx_dmaqueue
*vidq
= &dev
->video_mode
.vidq
;
739 spin_lock_irqsave(&dev
->video_mode
.slock
, flags
);
740 list_add_tail(&buf
->list
, &vidq
->active
);
741 spin_unlock_irqrestore(&dev
->video_mode
.slock
, flags
);
744 static void return_all_buffers(struct cx231xx
*dev
,
745 enum vb2_buffer_state state
)
747 struct cx231xx_dmaqueue
*vidq
= &dev
->video_mode
.vidq
;
748 struct cx231xx_buffer
*buf
, *node
;
751 spin_lock_irqsave(&dev
->video_mode
.slock
, flags
);
753 dev
->video_mode
.isoc_ctl
.buf
= NULL
;
755 dev
->video_mode
.bulk_ctl
.buf
= NULL
;
756 list_for_each_entry_safe(buf
, node
, &vidq
->active
, list
) {
757 list_del(&buf
->list
);
758 vb2_buffer_done(&buf
->vb
.vb2_buf
, state
);
760 spin_unlock_irqrestore(&dev
->video_mode
.slock
, flags
);
763 static int start_streaming(struct vb2_queue
*vq
, unsigned int count
)
765 struct cx231xx
*dev
= vb2_get_drv_priv(vq
);
766 struct cx231xx_dmaqueue
*vidq
= &dev
->video_mode
.vidq
;
772 cx231xx_enable_analog_tuner(dev
);
774 ret
= cx231xx_init_isoc(dev
, CX231XX_NUM_PACKETS
,
776 dev
->video_mode
.max_pkt_size
,
779 ret
= cx231xx_init_bulk(dev
, CX231XX_NUM_PACKETS
,
781 dev
->video_mode
.max_pkt_size
,
784 return_all_buffers(dev
, VB2_BUF_STATE_QUEUED
);
785 call_all(dev
, video
, s_stream
, 1);
789 static void stop_streaming(struct vb2_queue
*vq
)
791 struct cx231xx
*dev
= vb2_get_drv_priv(vq
);
793 call_all(dev
, video
, s_stream
, 0);
794 return_all_buffers(dev
, VB2_BUF_STATE_ERROR
);
797 static struct vb2_ops cx231xx_video_qops
= {
798 .queue_setup
= queue_setup
,
799 .buf_queue
= buffer_queue
,
800 .start_streaming
= start_streaming
,
801 .stop_streaming
= stop_streaming
,
802 .wait_prepare
= vb2_ops_wait_prepare
,
803 .wait_finish
= vb2_ops_wait_finish
,
806 /********************* v4l2 interface **************************************/
808 void video_mux(struct cx231xx
*dev
, int index
)
810 dev
->video_input
= index
;
811 dev
->ctl_ainput
= INPUT(index
)->amux
;
813 cx231xx_set_video_input_mux(dev
, index
);
815 cx25840_call(dev
, video
, s_routing
, INPUT(index
)->vmux
, 0, 0);
817 cx231xx_set_audio_input(dev
, dev
->ctl_ainput
);
819 dev_dbg(dev
->dev
, "video_mux : %d\n", index
);
821 /* do mode control overrides if required */
822 cx231xx_do_mode_ctrl_overrides(dev
);
825 /* ------------------------------------------------------------------
826 IOCTL vidioc handling
827 ------------------------------------------------------------------*/
829 static int vidioc_g_fmt_vid_cap(struct file
*file
, void *priv
,
830 struct v4l2_format
*f
)
832 struct cx231xx
*dev
= video_drvdata(file
);
834 f
->fmt
.pix
.width
= dev
->width
;
835 f
->fmt
.pix
.height
= dev
->height
;
836 f
->fmt
.pix
.pixelformat
= dev
->format
->fourcc
;
837 f
->fmt
.pix
.bytesperline
= (dev
->width
* dev
->format
->depth
+ 7) >> 3;
838 f
->fmt
.pix
.sizeimage
= f
->fmt
.pix
.bytesperline
* dev
->height
;
839 f
->fmt
.pix
.colorspace
= V4L2_COLORSPACE_SMPTE170M
;
841 f
->fmt
.pix
.field
= V4L2_FIELD_INTERLACED
;
846 static struct cx231xx_fmt
*format_by_fourcc(unsigned int fourcc
)
850 for (i
= 0; i
< ARRAY_SIZE(format
); i
++)
851 if (format
[i
].fourcc
== fourcc
)
857 static int vidioc_try_fmt_vid_cap(struct file
*file
, void *priv
,
858 struct v4l2_format
*f
)
860 struct cx231xx
*dev
= video_drvdata(file
);
861 unsigned int width
= f
->fmt
.pix
.width
;
862 unsigned int height
= f
->fmt
.pix
.height
;
863 unsigned int maxw
= norm_maxw(dev
);
864 unsigned int maxh
= norm_maxh(dev
);
865 struct cx231xx_fmt
*fmt
;
867 fmt
= format_by_fourcc(f
->fmt
.pix
.pixelformat
);
869 cx231xx_videodbg("Fourcc format (%08x) invalid.\n",
870 f
->fmt
.pix
.pixelformat
);
874 /* width must even because of the YUYV format
875 height must be even because of interlacing */
876 v4l_bound_align_image(&width
, 48, maxw
, 1, &height
, 32, maxh
, 1, 0);
878 f
->fmt
.pix
.width
= width
;
879 f
->fmt
.pix
.height
= height
;
880 f
->fmt
.pix
.pixelformat
= fmt
->fourcc
;
881 f
->fmt
.pix
.bytesperline
= (width
* fmt
->depth
+ 7) >> 3;
882 f
->fmt
.pix
.sizeimage
= f
->fmt
.pix
.bytesperline
* height
;
883 f
->fmt
.pix
.colorspace
= V4L2_COLORSPACE_SMPTE170M
;
884 f
->fmt
.pix
.field
= V4L2_FIELD_INTERLACED
;
889 static int vidioc_s_fmt_vid_cap(struct file
*file
, void *priv
,
890 struct v4l2_format
*f
)
892 struct cx231xx
*dev
= video_drvdata(file
);
893 struct v4l2_subdev_format format
= {
894 .which
= V4L2_SUBDEV_FORMAT_ACTIVE
,
898 rc
= vidioc_try_fmt_vid_cap(file
, priv
, f
);
902 if (vb2_is_busy(&dev
->vidq
)) {
903 dev_err(dev
->dev
, "%s: queue busy\n", __func__
);
907 /* set new image size */
908 dev
->width
= f
->fmt
.pix
.width
;
909 dev
->height
= f
->fmt
.pix
.height
;
910 dev
->format
= format_by_fourcc(f
->fmt
.pix
.pixelformat
);
912 v4l2_fill_mbus_format(&format
.format
, &f
->fmt
.pix
, MEDIA_BUS_FMT_FIXED
);
913 call_all(dev
, pad
, set_fmt
, NULL
, &format
);
914 v4l2_fill_pix_format(&f
->fmt
.pix
, &format
.format
);
919 static int vidioc_g_std(struct file
*file
, void *priv
, v4l2_std_id
*id
)
921 struct cx231xx
*dev
= video_drvdata(file
);
927 static int vidioc_s_std(struct file
*file
, void *priv
, v4l2_std_id norm
)
929 struct cx231xx
*dev
= video_drvdata(file
);
930 struct v4l2_subdev_format format
= {
931 .which
= V4L2_SUBDEV_FORMAT_ACTIVE
,
934 if (dev
->norm
== norm
)
937 if (vb2_is_busy(&dev
->vidq
))
942 /* Adjusts width/height, if needed */
944 dev
->height
= (dev
->norm
& V4L2_STD_625_50
) ? 576 : 480;
946 call_all(dev
, video
, s_std
, dev
->norm
);
948 /* We need to reset basic properties in the decoder related to
949 resolution (since a standard change effects things like the number
950 of lines in VACT, etc) */
951 format
.format
.code
= MEDIA_BUS_FMT_FIXED
;
952 format
.format
.width
= dev
->width
;
953 format
.format
.height
= dev
->height
;
954 call_all(dev
, pad
, set_fmt
, NULL
, &format
);
956 /* do mode control overrides */
957 cx231xx_do_mode_ctrl_overrides(dev
);
962 static const char *iname
[] = {
963 [CX231XX_VMUX_COMPOSITE1
] = "Composite1",
964 [CX231XX_VMUX_SVIDEO
] = "S-Video",
965 [CX231XX_VMUX_TELEVISION
] = "Television",
966 [CX231XX_VMUX_CABLE
] = "Cable TV",
967 [CX231XX_VMUX_DVB
] = "DVB",
970 void cx231xx_v4l2_create_entities(struct cx231xx
*dev
)
972 #if defined(CONFIG_MEDIA_CONTROLLER)
975 /* Create entities for each input connector */
976 for (i
= 0; i
< MAX_CX231XX_INPUT
; i
++) {
977 struct media_entity
*ent
= &dev
->input_ent
[i
];
982 ent
->name
= iname
[INPUT(i
)->type
];
983 ent
->flags
= MEDIA_ENT_FL_CONNECTOR
;
984 dev
->input_pad
[i
].flags
= MEDIA_PAD_FL_SOURCE
;
986 switch (INPUT(i
)->type
) {
987 case CX231XX_VMUX_COMPOSITE1
:
988 ent
->function
= MEDIA_ENT_F_CONN_COMPOSITE
;
990 case CX231XX_VMUX_SVIDEO
:
991 ent
->function
= MEDIA_ENT_F_CONN_SVIDEO
;
993 case CX231XX_VMUX_TELEVISION
:
994 case CX231XX_VMUX_CABLE
:
995 case CX231XX_VMUX_DVB
:
996 /* The DVB core will handle it */
997 if (dev
->tuner_type
== TUNER_ABSENT
)
1000 default: /* just to shut up a gcc warning */
1001 ent
->function
= MEDIA_ENT_F_CONN_RF
;
1005 ret
= media_entity_pads_init(ent
, 1, &dev
->input_pad
[i
]);
1007 pr_err("failed to initialize input pad[%d]!\n", i
);
1009 ret
= media_device_register_entity(dev
->media_dev
, ent
);
1011 pr_err("failed to register input entity %d!\n", i
);
1016 int cx231xx_enum_input(struct file
*file
, void *priv
,
1017 struct v4l2_input
*i
)
1019 struct cx231xx
*dev
= video_drvdata(file
);
1025 if (n
>= MAX_CX231XX_INPUT
)
1027 if (0 == INPUT(n
)->type
)
1031 i
->type
= V4L2_INPUT_TYPE_CAMERA
;
1033 strscpy(i
->name
, iname
[INPUT(n
)->type
], sizeof(i
->name
));
1035 if ((CX231XX_VMUX_TELEVISION
== INPUT(n
)->type
) ||
1036 (CX231XX_VMUX_CABLE
== INPUT(n
)->type
))
1037 i
->type
= V4L2_INPUT_TYPE_TUNER
;
1039 i
->std
= dev
->vdev
.tvnorms
;
1041 /* If they are asking about the active input, read signal status */
1042 if (n
== dev
->video_input
) {
1043 ret
= cx231xx_read_i2c_data(dev
, VID_BLK_I2C_ADDRESS
,
1044 GEN_STAT
, 2, &gen_stat
, 4);
1046 if ((gen_stat
& FLD_VPRES
) == 0x00)
1047 i
->status
|= V4L2_IN_ST_NO_SIGNAL
;
1048 if ((gen_stat
& FLD_HLOCK
) == 0x00)
1049 i
->status
|= V4L2_IN_ST_NO_H_LOCK
;
1056 int cx231xx_g_input(struct file
*file
, void *priv
, unsigned int *i
)
1058 struct cx231xx
*dev
= video_drvdata(file
);
1060 *i
= dev
->video_input
;
1065 int cx231xx_s_input(struct file
*file
, void *priv
, unsigned int i
)
1067 struct cx231xx
*dev
= video_drvdata(file
);
1071 if (i
>= MAX_CX231XX_INPUT
)
1073 if (0 == INPUT(i
)->type
)
1078 if (INPUT(i
)->type
== CX231XX_VMUX_TELEVISION
||
1079 INPUT(i
)->type
== CX231XX_VMUX_CABLE
) {
1080 /* There's a tuner, so reset the standard and put it on the
1081 last known frequency (since it was probably powered down
1083 call_all(dev
, video
, s_std
, dev
->norm
);
1089 int cx231xx_g_tuner(struct file
*file
, void *priv
, struct v4l2_tuner
*t
)
1091 struct cx231xx
*dev
= video_drvdata(file
);
1096 strscpy(t
->name
, "Tuner", sizeof(t
->name
));
1098 t
->type
= V4L2_TUNER_ANALOG_TV
;
1099 t
->capability
= V4L2_TUNER_CAP_NORM
;
1100 t
->rangehigh
= 0xffffffffUL
;
1101 t
->signal
= 0xffff; /* LOCKED */
1102 call_all(dev
, tuner
, g_tuner
, t
);
1107 int cx231xx_s_tuner(struct file
*file
, void *priv
, const struct v4l2_tuner
*t
)
1114 int cx231xx_g_frequency(struct file
*file
, void *priv
,
1115 struct v4l2_frequency
*f
)
1117 struct cx231xx
*dev
= video_drvdata(file
);
1122 f
->frequency
= dev
->ctl_freq
;
1127 int cx231xx_s_frequency(struct file
*file
, void *priv
,
1128 const struct v4l2_frequency
*f
)
1130 struct cx231xx
*dev
= video_drvdata(file
);
1131 struct v4l2_frequency new_freq
= *f
;
1132 int rc
, need_if_freq
= 0;
1133 u32 if_frequency
= 5400000;
1136 "Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
1137 f
->frequency
, f
->type
);
1142 /* set pre channel change settings in DIF first */
1143 rc
= cx231xx_tuner_pre_channel_change(dev
);
1145 switch (dev
->model
) { /* i2c device tuners */
1146 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx
:
1147 case CX231XX_BOARD_HAUPPAUGE_935C
:
1148 case CX231XX_BOARD_HAUPPAUGE_955Q
:
1149 case CX231XX_BOARD_HAUPPAUGE_975
:
1150 case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD
:
1151 if (dev
->cx231xx_set_analog_freq
)
1152 dev
->cx231xx_set_analog_freq(dev
, f
->frequency
);
1153 dev
->ctl_freq
= f
->frequency
;
1157 call_all(dev
, tuner
, s_frequency
, f
);
1158 call_all(dev
, tuner
, g_frequency
, &new_freq
);
1159 dev
->ctl_freq
= new_freq
.frequency
;
1163 pr_debug("%s() %u : %u\n", __func__
, f
->frequency
, dev
->ctl_freq
);
1165 /* set post channel change settings in DIF first */
1166 rc
= cx231xx_tuner_post_channel_change(dev
);
1168 if (need_if_freq
|| dev
->tuner_type
== TUNER_NXP_TDA18271
) {
1169 if (dev
->norm
& (V4L2_STD_MN
| V4L2_STD_NTSC_443
))
1170 if_frequency
= 5400000; /*5.4MHz */
1171 else if (dev
->norm
& V4L2_STD_B
)
1172 if_frequency
= 6000000; /*6.0MHz */
1173 else if (dev
->norm
& (V4L2_STD_PAL_DK
| V4L2_STD_SECAM_DK
))
1174 if_frequency
= 6900000; /*6.9MHz */
1175 else if (dev
->norm
& V4L2_STD_GH
)
1176 if_frequency
= 7100000; /*7.1MHz */
1177 else if (dev
->norm
& V4L2_STD_PAL_I
)
1178 if_frequency
= 7250000; /*7.25MHz */
1179 else if (dev
->norm
& V4L2_STD_SECAM_L
)
1180 if_frequency
= 6900000; /*6.9MHz */
1181 else if (dev
->norm
& V4L2_STD_SECAM_LC
)
1182 if_frequency
= 1250000; /*1.25MHz */
1185 "if_frequency is set to %d\n", if_frequency
);
1186 cx231xx_set_Colibri_For_LowIF(dev
, if_frequency
, 1, 1);
1188 update_HH_register_after_set_DIF(dev
);
1191 dev_dbg(dev
->dev
, "Set New FREQUENCY to %d\n", f
->frequency
);
1196 #ifdef CONFIG_VIDEO_ADV_DEBUG
1198 int cx231xx_g_chip_info(struct file
*file
, void *fh
,
1199 struct v4l2_dbg_chip_info
*chip
)
1201 switch (chip
->match
.addr
) {
1202 case 0: /* Cx231xx - internal registers */
1204 case 1: /* AFE - read byte */
1205 strscpy(chip
->name
, "AFE (byte)", sizeof(chip
->name
));
1207 case 2: /* Video Block - read byte */
1208 strscpy(chip
->name
, "Video (byte)", sizeof(chip
->name
));
1210 case 3: /* I2S block - read byte */
1211 strscpy(chip
->name
, "I2S (byte)", sizeof(chip
->name
));
1213 case 4: /* AFE - read dword */
1214 strscpy(chip
->name
, "AFE (dword)", sizeof(chip
->name
));
1216 case 5: /* Video Block - read dword */
1217 strscpy(chip
->name
, "Video (dword)", sizeof(chip
->name
));
1219 case 6: /* I2S Block - read dword */
1220 strscpy(chip
->name
, "I2S (dword)", sizeof(chip
->name
));
1226 int cx231xx_g_register(struct file
*file
, void *priv
,
1227 struct v4l2_dbg_register
*reg
)
1229 struct cx231xx
*dev
= video_drvdata(file
);
1231 u8 value
[4] = { 0, 0, 0, 0 };
1234 switch (reg
->match
.addr
) {
1235 case 0: /* Cx231xx - internal registers */
1236 ret
= cx231xx_read_ctrl_reg(dev
, VRT_GET_REGISTER
,
1237 (u16
)reg
->reg
, value
, 4);
1238 reg
->val
= value
[0] | value
[1] << 8 |
1239 value
[2] << 16 | (u32
)value
[3] << 24;
1242 case 1: /* AFE - read byte */
1243 ret
= cx231xx_read_i2c_data(dev
, AFE_DEVICE_ADDRESS
,
1244 (u16
)reg
->reg
, 2, &data
, 1);
1248 case 2: /* Video Block - read byte */
1249 ret
= cx231xx_read_i2c_data(dev
, VID_BLK_I2C_ADDRESS
,
1250 (u16
)reg
->reg
, 2, &data
, 1);
1254 case 3: /* I2S block - read byte */
1255 ret
= cx231xx_read_i2c_data(dev
, I2S_BLK_DEVICE_ADDRESS
,
1256 (u16
)reg
->reg
, 1, &data
, 1);
1260 case 4: /* AFE - read dword */
1261 ret
= cx231xx_read_i2c_data(dev
, AFE_DEVICE_ADDRESS
,
1262 (u16
)reg
->reg
, 2, &data
, 4);
1266 case 5: /* Video Block - read dword */
1267 ret
= cx231xx_read_i2c_data(dev
, VID_BLK_I2C_ADDRESS
,
1268 (u16
)reg
->reg
, 2, &data
, 4);
1272 case 6: /* I2S Block - read dword */
1273 ret
= cx231xx_read_i2c_data(dev
, I2S_BLK_DEVICE_ADDRESS
,
1274 (u16
)reg
->reg
, 1, &data
, 4);
1281 return ret
< 0 ? ret
: 0;
1284 int cx231xx_s_register(struct file
*file
, void *priv
,
1285 const struct v4l2_dbg_register
*reg
)
1287 struct cx231xx
*dev
= video_drvdata(file
);
1289 u8 data
[4] = { 0, 0, 0, 0 };
1291 switch (reg
->match
.addr
) {
1292 case 0: /* cx231xx internal registers */
1293 data
[0] = (u8
) reg
->val
;
1294 data
[1] = (u8
) (reg
->val
>> 8);
1295 data
[2] = (u8
) (reg
->val
>> 16);
1296 data
[3] = (u8
) (reg
->val
>> 24);
1297 ret
= cx231xx_write_ctrl_reg(dev
, VRT_SET_REGISTER
,
1298 (u16
)reg
->reg
, data
, 4);
1300 case 1: /* AFE - write byte */
1301 ret
= cx231xx_write_i2c_data(dev
, AFE_DEVICE_ADDRESS
,
1302 (u16
)reg
->reg
, 2, reg
->val
, 1);
1304 case 2: /* Video Block - write byte */
1305 ret
= cx231xx_write_i2c_data(dev
, VID_BLK_I2C_ADDRESS
,
1306 (u16
)reg
->reg
, 2, reg
->val
, 1);
1308 case 3: /* I2S block - write byte */
1309 ret
= cx231xx_write_i2c_data(dev
, I2S_BLK_DEVICE_ADDRESS
,
1310 (u16
)reg
->reg
, 1, reg
->val
, 1);
1312 case 4: /* AFE - write dword */
1313 ret
= cx231xx_write_i2c_data(dev
, AFE_DEVICE_ADDRESS
,
1314 (u16
)reg
->reg
, 2, reg
->val
, 4);
1316 case 5: /* Video Block - write dword */
1317 ret
= cx231xx_write_i2c_data(dev
, VID_BLK_I2C_ADDRESS
,
1318 (u16
)reg
->reg
, 2, reg
->val
, 4);
1320 case 6: /* I2S block - write dword */
1321 ret
= cx231xx_write_i2c_data(dev
, I2S_BLK_DEVICE_ADDRESS
,
1322 (u16
)reg
->reg
, 1, reg
->val
, 4);
1327 return ret
< 0 ? ret
: 0;
1331 static int vidioc_g_pixelaspect(struct file
*file
, void *priv
,
1332 int type
, struct v4l2_fract
*f
)
1334 struct cx231xx
*dev
= video_drvdata(file
);
1335 bool is_50hz
= dev
->norm
& V4L2_STD_625_50
;
1337 if (type
!= V4L2_BUF_TYPE_VIDEO_CAPTURE
)
1340 f
->numerator
= is_50hz
? 54 : 11;
1341 f
->denominator
= is_50hz
? 59 : 10;
1346 static int vidioc_g_selection(struct file
*file
, void *priv
,
1347 struct v4l2_selection
*s
)
1349 struct cx231xx
*dev
= video_drvdata(file
);
1351 if (s
->type
!= V4L2_BUF_TYPE_VIDEO_CAPTURE
)
1354 switch (s
->target
) {
1355 case V4L2_SEL_TGT_CROP_BOUNDS
:
1356 case V4L2_SEL_TGT_CROP_DEFAULT
:
1359 s
->r
.width
= dev
->width
;
1360 s
->r
.height
= dev
->height
;
1368 int cx231xx_querycap(struct file
*file
, void *priv
,
1369 struct v4l2_capability
*cap
)
1371 struct cx231xx
*dev
= video_drvdata(file
);
1373 strscpy(cap
->driver
, "cx231xx", sizeof(cap
->driver
));
1374 strscpy(cap
->card
, cx231xx_boards
[dev
->model
].name
, sizeof(cap
->card
));
1375 usb_make_path(dev
->udev
, cap
->bus_info
, sizeof(cap
->bus_info
));
1376 cap
->capabilities
= V4L2_CAP_READWRITE
|
1377 V4L2_CAP_VBI_CAPTURE
| V4L2_CAP_VIDEO_CAPTURE
|
1378 V4L2_CAP_STREAMING
| V4L2_CAP_DEVICE_CAPS
;
1379 if (video_is_registered(&dev
->radio_dev
))
1380 cap
->capabilities
|= V4L2_CAP_RADIO
;
1382 switch (dev
->model
) {
1383 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx
:
1384 case CX231XX_BOARD_HAUPPAUGE_935C
:
1385 case CX231XX_BOARD_HAUPPAUGE_955Q
:
1386 case CX231XX_BOARD_HAUPPAUGE_975
:
1387 case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD
:
1388 cap
->capabilities
|= V4L2_CAP_TUNER
;
1391 if (dev
->tuner_type
!= TUNER_ABSENT
)
1392 cap
->capabilities
|= V4L2_CAP_TUNER
;
1398 static int vidioc_enum_fmt_vid_cap(struct file
*file
, void *priv
,
1399 struct v4l2_fmtdesc
*f
)
1401 if (unlikely(f
->index
>= ARRAY_SIZE(format
)))
1404 f
->pixelformat
= format
[f
->index
].fourcc
;
1409 /* RAW VBI ioctls */
1411 static int vidioc_g_fmt_vbi_cap(struct file
*file
, void *priv
,
1412 struct v4l2_format
*f
)
1414 struct cx231xx
*dev
= video_drvdata(file
);
1416 f
->fmt
.vbi
.sampling_rate
= 6750000 * 4;
1417 f
->fmt
.vbi
.samples_per_line
= VBI_LINE_LENGTH
;
1418 f
->fmt
.vbi
.sample_format
= V4L2_PIX_FMT_GREY
;
1419 f
->fmt
.vbi
.offset
= 0;
1420 f
->fmt
.vbi
.start
[0] = (dev
->norm
& V4L2_STD_625_50
) ?
1421 PAL_VBI_START_LINE
: NTSC_VBI_START_LINE
;
1422 f
->fmt
.vbi
.count
[0] = (dev
->norm
& V4L2_STD_625_50
) ?
1423 PAL_VBI_LINES
: NTSC_VBI_LINES
;
1424 f
->fmt
.vbi
.start
[1] = (dev
->norm
& V4L2_STD_625_50
) ?
1425 PAL_VBI_START_LINE
+ 312 : NTSC_VBI_START_LINE
+ 263;
1426 f
->fmt
.vbi
.count
[1] = f
->fmt
.vbi
.count
[0];
1427 memset(f
->fmt
.vbi
.reserved
, 0, sizeof(f
->fmt
.vbi
.reserved
));
1433 static int vidioc_try_fmt_vbi_cap(struct file
*file
, void *priv
,
1434 struct v4l2_format
*f
)
1436 struct cx231xx
*dev
= video_drvdata(file
);
1438 f
->fmt
.vbi
.sampling_rate
= 6750000 * 4;
1439 f
->fmt
.vbi
.samples_per_line
= VBI_LINE_LENGTH
;
1440 f
->fmt
.vbi
.sample_format
= V4L2_PIX_FMT_GREY
;
1441 f
->fmt
.vbi
.offset
= 0;
1442 f
->fmt
.vbi
.flags
= 0;
1443 f
->fmt
.vbi
.start
[0] = (dev
->norm
& V4L2_STD_625_50
) ?
1444 PAL_VBI_START_LINE
: NTSC_VBI_START_LINE
;
1445 f
->fmt
.vbi
.count
[0] = (dev
->norm
& V4L2_STD_625_50
) ?
1446 PAL_VBI_LINES
: NTSC_VBI_LINES
;
1447 f
->fmt
.vbi
.start
[1] = (dev
->norm
& V4L2_STD_625_50
) ?
1448 PAL_VBI_START_LINE
+ 312 : NTSC_VBI_START_LINE
+ 263;
1449 f
->fmt
.vbi
.count
[1] = f
->fmt
.vbi
.count
[0];
1450 memset(f
->fmt
.vbi
.reserved
, 0, sizeof(f
->fmt
.vbi
.reserved
));
1456 static int vidioc_s_fmt_vbi_cap(struct file
*file
, void *priv
,
1457 struct v4l2_format
*f
)
1459 return vidioc_try_fmt_vbi_cap(file
, priv
, f
);
1462 /* ----------------------------------------------------------- */
1463 /* RADIO ESPECIFIC IOCTLS */
1464 /* ----------------------------------------------------------- */
1466 static int radio_g_tuner(struct file
*file
, void *priv
, struct v4l2_tuner
*t
)
1468 struct cx231xx
*dev
= video_drvdata(file
);
1473 strscpy(t
->name
, "Radio", sizeof(t
->name
));
1475 call_all(dev
, tuner
, g_tuner
, t
);
1479 static int radio_s_tuner(struct file
*file
, void *priv
, const struct v4l2_tuner
*t
)
1481 struct cx231xx
*dev
= video_drvdata(file
);
1486 call_all(dev
, tuner
, s_tuner
, t
);
1492 * cx231xx_v4l2_open()
1493 * inits the device and starts isoc transfer
1495 static int cx231xx_v4l2_open(struct file
*filp
)
1497 struct video_device
*vdev
= video_devdata(filp
);
1498 struct cx231xx
*dev
= video_drvdata(filp
);
1501 if (mutex_lock_interruptible(&dev
->lock
))
1502 return -ERESTARTSYS
;
1504 ret
= v4l2_fh_open(filp
);
1506 mutex_unlock(&dev
->lock
);
1510 if (dev
->users
++ == 0) {
1511 /* Power up in Analog TV mode */
1512 if (dev
->board
.external_av
)
1513 cx231xx_set_power_mode(dev
,
1514 POLARIS_AVMODE_ENXTERNAL_AV
);
1516 cx231xx_set_power_mode(dev
, POLARIS_AVMODE_ANALOGT_TV
);
1518 /* set video alternate setting */
1519 cx231xx_set_video_alternate(dev
);
1521 /* Needed, since GPIO might have disabled power of
1523 cx231xx_config_i2c(dev
);
1525 /* device needs to be initialized before isoc transfer */
1526 dev
->video_input
= dev
->video_input
> 2 ? 2 : dev
->video_input
;
1529 if (vdev
->vfl_type
== VFL_TYPE_RADIO
) {
1530 cx231xx_videodbg("video_open: setting radio device\n");
1532 /* cx231xx_start_radio(dev); */
1534 call_all(dev
, tuner
, s_radio
);
1536 if (vdev
->vfl_type
== VFL_TYPE_VBI
) {
1537 /* Set the required alternate setting VBI interface works in
1539 cx231xx_set_alt_setting(dev
, INDEX_VANC
, 0);
1541 mutex_unlock(&dev
->lock
);
1546 * cx231xx_realease_resources()
1547 * unregisters the v4l2,i2c and usb devices
1548 * called when the device gets disconnected or at module unload
1550 void cx231xx_release_analog_resources(struct cx231xx
*dev
)
1553 /*FIXME: I2C IR should be disconnected */
1555 if (video_is_registered(&dev
->radio_dev
))
1556 video_unregister_device(&dev
->radio_dev
);
1557 if (video_is_registered(&dev
->vbi_dev
)) {
1558 dev_info(dev
->dev
, "V4L2 device %s deregistered\n",
1559 video_device_node_name(&dev
->vbi_dev
));
1560 video_unregister_device(&dev
->vbi_dev
);
1562 if (video_is_registered(&dev
->vdev
)) {
1563 dev_info(dev
->dev
, "V4L2 device %s deregistered\n",
1564 video_device_node_name(&dev
->vdev
));
1566 if (dev
->board
.has_417
)
1567 cx231xx_417_unregister(dev
);
1569 video_unregister_device(&dev
->vdev
);
1571 v4l2_ctrl_handler_free(&dev
->ctrl_handler
);
1572 v4l2_ctrl_handler_free(&dev
->radio_ctrl_handler
);
1577 * stops streaming and deallocates all resources allocated by the v4l2
1580 static int cx231xx_close(struct file
*filp
)
1582 struct cx231xx
*dev
= video_drvdata(filp
);
1583 struct video_device
*vdev
= video_devdata(filp
);
1585 _vb2_fop_release(filp
, NULL
);
1587 if (--dev
->users
== 0) {
1588 /* Save some power by putting tuner to sleep */
1589 call_all(dev
, tuner
, standby
);
1591 /* do this before setting alternate! */
1593 cx231xx_uninit_isoc(dev
);
1595 cx231xx_uninit_bulk(dev
);
1596 cx231xx_set_mode(dev
, CX231XX_SUSPEND
);
1600 * To workaround error number=-71 on EP0 for VideoGrabber,
1601 * need exclude following.
1602 * FIXME: It is probably safe to remove most of these, as we're
1603 * now avoiding the alternate setting for INDEX_VANC
1605 if (!dev
->board
.no_alt_vanc
&& vdev
->vfl_type
== VFL_TYPE_VBI
) {
1606 /* do this before setting alternate! */
1607 cx231xx_uninit_vbi_isoc(dev
);
1609 /* set alternate 0 */
1610 if (!dev
->vbi_or_sliced_cc_mode
)
1611 cx231xx_set_alt_setting(dev
, INDEX_VANC
, 0);
1613 cx231xx_set_alt_setting(dev
, INDEX_HANC
, 0);
1615 wake_up_interruptible_nr(&dev
->open
, 1);
1619 if (dev
->users
== 0) {
1620 /* set alternate 0 */
1621 cx231xx_set_alt_setting(dev
, INDEX_VIDEO
, 0);
1624 wake_up_interruptible(&dev
->open
);
1628 static int cx231xx_v4l2_close(struct file
*filp
)
1630 struct cx231xx
*dev
= video_drvdata(filp
);
1633 mutex_lock(&dev
->lock
);
1634 rc
= cx231xx_close(filp
);
1635 mutex_unlock(&dev
->lock
);
1639 static const struct v4l2_file_operations cx231xx_v4l_fops
= {
1640 .owner
= THIS_MODULE
,
1641 .open
= cx231xx_v4l2_open
,
1642 .release
= cx231xx_v4l2_close
,
1643 .read
= vb2_fop_read
,
1644 .poll
= vb2_fop_poll
,
1645 .mmap
= vb2_fop_mmap
,
1646 .unlocked_ioctl
= video_ioctl2
,
1649 static const struct v4l2_ioctl_ops video_ioctl_ops
= {
1650 .vidioc_querycap
= cx231xx_querycap
,
1651 .vidioc_enum_fmt_vid_cap
= vidioc_enum_fmt_vid_cap
,
1652 .vidioc_g_fmt_vid_cap
= vidioc_g_fmt_vid_cap
,
1653 .vidioc_try_fmt_vid_cap
= vidioc_try_fmt_vid_cap
,
1654 .vidioc_s_fmt_vid_cap
= vidioc_s_fmt_vid_cap
,
1655 .vidioc_g_fmt_vbi_cap
= vidioc_g_fmt_vbi_cap
,
1656 .vidioc_try_fmt_vbi_cap
= vidioc_try_fmt_vbi_cap
,
1657 .vidioc_s_fmt_vbi_cap
= vidioc_s_fmt_vbi_cap
,
1658 .vidioc_g_pixelaspect
= vidioc_g_pixelaspect
,
1659 .vidioc_g_selection
= vidioc_g_selection
,
1660 .vidioc_reqbufs
= vb2_ioctl_reqbufs
,
1661 .vidioc_querybuf
= vb2_ioctl_querybuf
,
1662 .vidioc_qbuf
= vb2_ioctl_qbuf
,
1663 .vidioc_dqbuf
= vb2_ioctl_dqbuf
,
1664 .vidioc_s_std
= vidioc_s_std
,
1665 .vidioc_g_std
= vidioc_g_std
,
1666 .vidioc_enum_input
= cx231xx_enum_input
,
1667 .vidioc_g_input
= cx231xx_g_input
,
1668 .vidioc_s_input
= cx231xx_s_input
,
1669 .vidioc_streamon
= vb2_ioctl_streamon
,
1670 .vidioc_streamoff
= vb2_ioctl_streamoff
,
1671 .vidioc_g_tuner
= cx231xx_g_tuner
,
1672 .vidioc_s_tuner
= cx231xx_s_tuner
,
1673 .vidioc_g_frequency
= cx231xx_g_frequency
,
1674 .vidioc_s_frequency
= cx231xx_s_frequency
,
1675 #ifdef CONFIG_VIDEO_ADV_DEBUG
1676 .vidioc_g_chip_info
= cx231xx_g_chip_info
,
1677 .vidioc_g_register
= cx231xx_g_register
,
1678 .vidioc_s_register
= cx231xx_s_register
,
1680 .vidioc_subscribe_event
= v4l2_ctrl_subscribe_event
,
1681 .vidioc_unsubscribe_event
= v4l2_event_unsubscribe
,
1684 static struct video_device cx231xx_vbi_template
;
1686 static const struct video_device cx231xx_video_template
= {
1687 .fops
= &cx231xx_v4l_fops
,
1688 .release
= video_device_release_empty
,
1689 .ioctl_ops
= &video_ioctl_ops
,
1690 .tvnorms
= V4L2_STD_ALL
,
1693 static const struct v4l2_file_operations radio_fops
= {
1694 .owner
= THIS_MODULE
,
1695 .open
= cx231xx_v4l2_open
,
1696 .release
= cx231xx_v4l2_close
,
1697 .poll
= v4l2_ctrl_poll
,
1698 .unlocked_ioctl
= video_ioctl2
,
1701 static const struct v4l2_ioctl_ops radio_ioctl_ops
= {
1702 .vidioc_querycap
= cx231xx_querycap
,
1703 .vidioc_g_tuner
= radio_g_tuner
,
1704 .vidioc_s_tuner
= radio_s_tuner
,
1705 .vidioc_g_frequency
= cx231xx_g_frequency
,
1706 .vidioc_s_frequency
= cx231xx_s_frequency
,
1707 #ifdef CONFIG_VIDEO_ADV_DEBUG
1708 .vidioc_g_chip_info
= cx231xx_g_chip_info
,
1709 .vidioc_g_register
= cx231xx_g_register
,
1710 .vidioc_s_register
= cx231xx_s_register
,
1712 .vidioc_subscribe_event
= v4l2_ctrl_subscribe_event
,
1713 .vidioc_unsubscribe_event
= v4l2_event_unsubscribe
,
1716 static struct video_device cx231xx_radio_template
= {
1717 .name
= "cx231xx-radio",
1718 .fops
= &radio_fops
,
1719 .ioctl_ops
= &radio_ioctl_ops
,
1722 /******************************** usb interface ******************************/
1724 static void cx231xx_vdev_init(struct cx231xx
*dev
,
1725 struct video_device
*vfd
,
1726 const struct video_device
*template,
1727 const char *type_name
)
1730 vfd
->v4l2_dev
= &dev
->v4l2_dev
;
1731 vfd
->release
= video_device_release_empty
;
1732 vfd
->lock
= &dev
->lock
;
1734 snprintf(vfd
->name
, sizeof(vfd
->name
), "%s %s", dev
->name
, type_name
);
1736 video_set_drvdata(vfd
, dev
);
1737 if (dev
->tuner_type
== TUNER_ABSENT
) {
1738 switch (dev
->model
) {
1739 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx
:
1740 case CX231XX_BOARD_HAUPPAUGE_935C
:
1741 case CX231XX_BOARD_HAUPPAUGE_955Q
:
1742 case CX231XX_BOARD_HAUPPAUGE_975
:
1743 case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD
:
1746 v4l2_disable_ioctl(vfd
, VIDIOC_G_FREQUENCY
);
1747 v4l2_disable_ioctl(vfd
, VIDIOC_S_FREQUENCY
);
1748 v4l2_disable_ioctl(vfd
, VIDIOC_G_TUNER
);
1749 v4l2_disable_ioctl(vfd
, VIDIOC_S_TUNER
);
1755 int cx231xx_register_analog_devices(struct cx231xx
*dev
)
1757 struct vb2_queue
*q
;
1760 dev_info(dev
->dev
, "v4l2 driver version %s\n", CX231XX_VERSION
);
1762 /* set default norm */
1763 dev
->norm
= V4L2_STD_PAL
;
1764 dev
->width
= norm_maxw(dev
);
1765 dev
->height
= norm_maxh(dev
);
1766 dev
->interlaced
= 0;
1768 /* Analog specific initialization */
1769 dev
->format
= &format
[0];
1771 /* Set the initial input */
1772 video_mux(dev
, dev
->video_input
);
1774 call_all(dev
, video
, s_std
, dev
->norm
);
1776 v4l2_ctrl_handler_init(&dev
->ctrl_handler
, 10);
1777 v4l2_ctrl_handler_init(&dev
->radio_ctrl_handler
, 5);
1779 if (dev
->sd_cx25840
) {
1780 v4l2_ctrl_add_handler(&dev
->ctrl_handler
,
1781 dev
->sd_cx25840
->ctrl_handler
, NULL
, true);
1782 v4l2_ctrl_add_handler(&dev
->radio_ctrl_handler
,
1783 dev
->sd_cx25840
->ctrl_handler
,
1784 v4l2_ctrl_radio_filter
, true);
1787 if (dev
->ctrl_handler
.error
)
1788 return dev
->ctrl_handler
.error
;
1789 if (dev
->radio_ctrl_handler
.error
)
1790 return dev
->radio_ctrl_handler
.error
;
1792 /* enable vbi capturing */
1793 /* write code here... */
1795 /* allocate and fill video video_device struct */
1796 cx231xx_vdev_init(dev
, &dev
->vdev
, &cx231xx_video_template
, "video");
1797 #if defined(CONFIG_MEDIA_CONTROLLER)
1798 dev
->video_pad
.flags
= MEDIA_PAD_FL_SINK
;
1799 ret
= media_entity_pads_init(&dev
->vdev
.entity
, 1, &dev
->video_pad
);
1801 dev_err(dev
->dev
, "failed to initialize video media entity!\n");
1803 dev
->vdev
.ctrl_handler
= &dev
->ctrl_handler
;
1806 q
->type
= V4L2_BUF_TYPE_VIDEO_CAPTURE
;
1807 q
->io_modes
= VB2_USERPTR
| VB2_MMAP
| VB2_DMABUF
| VB2_READ
;
1809 q
->buf_struct_size
= sizeof(struct cx231xx_buffer
);
1810 q
->ops
= &cx231xx_video_qops
;
1811 q
->mem_ops
= &vb2_vmalloc_memops
;
1812 q
->timestamp_flags
= V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
;
1813 q
->min_buffers_needed
= 1;
1814 q
->lock
= &dev
->lock
;
1815 ret
= vb2_queue_init(q
);
1818 dev
->vdev
.queue
= q
;
1819 dev
->vdev
.device_caps
= V4L2_CAP_READWRITE
| V4L2_CAP_STREAMING
|
1820 V4L2_CAP_VIDEO_CAPTURE
;
1822 switch (dev
->model
) { /* i2c device tuners */
1823 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx
:
1824 case CX231XX_BOARD_HAUPPAUGE_935C
:
1825 case CX231XX_BOARD_HAUPPAUGE_955Q
:
1826 case CX231XX_BOARD_HAUPPAUGE_975
:
1827 case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD
:
1828 dev
->vdev
.device_caps
|= V4L2_CAP_TUNER
;
1831 if (dev
->tuner_type
!= TUNER_ABSENT
)
1832 dev
->vdev
.device_caps
|= V4L2_CAP_TUNER
;
1836 /* register v4l2 video video_device */
1837 ret
= video_register_device(&dev
->vdev
, VFL_TYPE_VIDEO
,
1838 video_nr
[dev
->devno
]);
1841 "unable to register video device (error=%i).\n",
1846 dev_info(dev
->dev
, "Registered video device %s [v4l2]\n",
1847 video_device_node_name(&dev
->vdev
));
1849 /* Initialize VBI template */
1850 cx231xx_vbi_template
= cx231xx_video_template
;
1851 strscpy(cx231xx_vbi_template
.name
, "cx231xx-vbi",
1852 sizeof(cx231xx_vbi_template
.name
));
1854 /* Allocate and fill vbi video_device struct */
1855 cx231xx_vdev_init(dev
, &dev
->vbi_dev
, &cx231xx_vbi_template
, "vbi");
1857 #if defined(CONFIG_MEDIA_CONTROLLER)
1858 dev
->vbi_pad
.flags
= MEDIA_PAD_FL_SINK
;
1859 ret
= media_entity_pads_init(&dev
->vbi_dev
.entity
, 1, &dev
->vbi_pad
);
1861 dev_err(dev
->dev
, "failed to initialize vbi media entity!\n");
1863 dev
->vbi_dev
.ctrl_handler
= &dev
->ctrl_handler
;
1866 q
->type
= V4L2_BUF_TYPE_VBI_CAPTURE
;
1867 q
->io_modes
= VB2_USERPTR
| VB2_MMAP
| VB2_DMABUF
| VB2_READ
;
1869 q
->buf_struct_size
= sizeof(struct cx231xx_buffer
);
1870 q
->ops
= &cx231xx_vbi_qops
;
1871 q
->mem_ops
= &vb2_vmalloc_memops
;
1872 q
->timestamp_flags
= V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
;
1873 q
->min_buffers_needed
= 1;
1874 q
->lock
= &dev
->lock
;
1875 ret
= vb2_queue_init(q
);
1878 dev
->vbi_dev
.queue
= q
;
1879 dev
->vbi_dev
.device_caps
= V4L2_CAP_READWRITE
| V4L2_CAP_STREAMING
|
1880 V4L2_CAP_VBI_CAPTURE
;
1881 switch (dev
->model
) { /* i2c device tuners */
1882 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx
:
1883 case CX231XX_BOARD_HAUPPAUGE_935C
:
1884 case CX231XX_BOARD_HAUPPAUGE_955Q
:
1885 case CX231XX_BOARD_HAUPPAUGE_975
:
1886 case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD
:
1887 dev
->vbi_dev
.device_caps
|= V4L2_CAP_TUNER
;
1890 if (dev
->tuner_type
!= TUNER_ABSENT
)
1891 dev
->vbi_dev
.device_caps
|= V4L2_CAP_TUNER
;
1894 /* register v4l2 vbi video_device */
1895 ret
= video_register_device(&dev
->vbi_dev
, VFL_TYPE_VBI
,
1896 vbi_nr
[dev
->devno
]);
1898 dev_err(dev
->dev
, "unable to register vbi device\n");
1902 dev_info(dev
->dev
, "Registered VBI device %s\n",
1903 video_device_node_name(&dev
->vbi_dev
));
1905 if (cx231xx_boards
[dev
->model
].radio
.type
== CX231XX_RADIO
) {
1906 cx231xx_vdev_init(dev
, &dev
->radio_dev
,
1907 &cx231xx_radio_template
, "radio");
1908 dev
->radio_dev
.ctrl_handler
= &dev
->radio_ctrl_handler
;
1909 dev
->radio_dev
.device_caps
= V4L2_CAP_RADIO
| V4L2_CAP_TUNER
;
1910 ret
= video_register_device(&dev
->radio_dev
, VFL_TYPE_RADIO
,
1911 radio_nr
[dev
->devno
]);
1914 "can't register radio device\n");
1917 dev_info(dev
->dev
, "Registered radio device as %s\n",
1918 video_device_node_name(&dev
->radio_dev
));