drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  mxl111sf-phy.c - driver for the MaxLinear MXL111SF
   4  *
   5  *  Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
   6  */
   7
   8 #include "mxl111sf-phy.h"
   9 #include "mxl111sf-reg.h"
  10
  11 int mxl111sf_init_tuner_demod(struct mxl111sf_state *state)
  12 {
  13         struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = {
  14                 {0x07, 0xff, 0x0c},
  15                 {0x58, 0xff, 0x9d},
  16                 {0x09, 0xff, 0x00},
  17                 {0x06, 0xff, 0x06},
  18                 {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */
  19                 {0x8d, 0x01, 0x01}, /* NEGATE_Q */
  20                 {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */
  21                 {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */
  22                 {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */
  23                 {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */
  24                 {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */
  25                 {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */
  26                 {0x88, 0xff, 0xf0}, /* INF_THD = 240 */
  27                 {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */
  28                 {0x00, 0xff, 0x01}, /* Change to page 1 */
  29                 {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */
  30                 {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */
  31                 {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */
  32                 {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */
  33                 {0x00, 0xff, 0x00}, /* Change to page 0 */
  34                 {0,    0,    0}
  35         };
  36
  37         mxl_debug("()");
  38
  39         return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default);
  40 }
  41
  42 int mxl1x1sf_soft_reset(struct mxl111sf_state *state)
  43 {
  44         int ret;
  45         mxl_debug("()");
  46
  47         ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */
  48         if (mxl_fail(ret))
  49                 goto fail;
  50         ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */
  51         mxl_fail(ret);
  52 fail:
  53         return ret;
  54 }
  55
  56 int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode)
  57 {
  58         int ret;
  59
  60         mxl_debug("(%s)", MXL_SOC_MODE == mode ?
  61                 "MXL_SOC_MODE" : "MXL_TUNER_MODE");
  62
  63         /* set device mode */
  64         ret = mxl111sf_write_reg(state, 0x03,
  65                                  MXL_SOC_MODE == mode ? 0x01 : 0x00);
  66         if (mxl_fail(ret))
  67                 goto fail;
  68
  69         ret = mxl111sf_write_reg_mask(state,
  70                                       0x7d, 0x40, MXL_SOC_MODE == mode ?
  71                                       0x00 : /* enable impulse noise filter,
  72                                                 INF_BYP = 0 */
  73                                       0x40); /* disable impulse noise filter,
  74                                                 INF_BYP = 1 */
  75         if (mxl_fail(ret))
  76                 goto fail;
  77
  78         state->device_mode = mode;
  79 fail:
  80         return ret;
  81 }
  82
  83 /* power up tuner */
  84 int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff)
  85 {
  86         mxl_debug("(%d)", onoff);
  87
  88         return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00);
  89 }
  90
  91 int mxl111sf_disable_656_port(struct mxl111sf_state *state)
  92 {
  93         mxl_debug("()");
  94
  95         return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00);
  96 }
  97
  98 int mxl111sf_enable_usb_output(struct mxl111sf_state *state)
  99 {
 100         mxl_debug("()");
 101
 102         return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00);
 103 }
 104
 105 /* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */
 106 int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
 107                             unsigned int parallel_serial,
 108                             unsigned int msb_lsb_1st,
 109                             unsigned int clock_phase,
 110                             unsigned int mpeg_valid_pol,
 111                             unsigned int mpeg_sync_pol)
 112 {
 113         int ret;
 114         u8 mode, tmp;
 115
 116         mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st,
 117                   clock_phase, mpeg_valid_pol, mpeg_sync_pol);
 118
 119         /* Enable PIN MUX */
 120         ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX);
 121         mxl_fail(ret);
 122
 123         /* Configure MPEG Clock phase */
 124         mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
 125
 126         if (clock_phase == TSIF_NORMAL)
 127                 mode &= ~V6_INVERTED_CLK_PHASE;
 128         else
 129                 mode |= V6_INVERTED_CLK_PHASE;
 130
 131         ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode);
 132         mxl_fail(ret);
 133
 134         /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity
 135          * Get current configuration */
 136         ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode);
 137         mxl_fail(ret);
 138
 139         /* Data Input mode */
 140         if (parallel_serial == TSIF_INPUT_PARALLEL) {
 141                 /* Disable serial mode */
 142                 mode &= ~V6_MPEG_IN_DATA_SERIAL;
 143
 144                 /* Enable Parallel mode */
 145                 mode |= V6_MPEG_IN_DATA_PARALLEL;
 146         } else {
 147                 /* Disable Parallel mode */
 148                 mode &= ~V6_MPEG_IN_DATA_PARALLEL;
 149
 150                 /* Enable Serial Mode */
 151                 mode |= V6_MPEG_IN_DATA_SERIAL;
 152
 153                 /* If serial interface is chosen, configure
 154                    MSB or LSB order in transmission */
 155                 ret = mxl111sf_read_reg(state,
 156                                         V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
 157                                         &tmp);
 158                 mxl_fail(ret);
 159
 160                 if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED)
 161                         tmp |= V6_MPEG_SER_MSB_FIRST;
 162                 else
 163                         tmp &= ~V6_MPEG_SER_MSB_FIRST;
 164
 165                 ret = mxl111sf_write_reg(state,
 166                                          V6_MPEG_INOUT_BIT_ORDER_CTRL_REG,
 167                                          tmp);
 168                 mxl_fail(ret);
 169         }
 170
 171         /* MPEG Sync polarity */
 172         if (mpeg_sync_pol == TSIF_NORMAL)
 173                 mode &= ~V6_INVERTED_MPEG_SYNC;
 174         else
 175                 mode |= V6_INVERTED_MPEG_SYNC;
 176
 177         /* MPEG Valid polarity */
 178         if (mpeg_valid_pol == 0)
 179                 mode &= ~V6_INVERTED_MPEG_VALID;
 180         else
 181                 mode |= V6_INVERTED_MPEG_VALID;
 182
 183         ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode);
 184         mxl_fail(ret);
 185
 186         return ret;
 187 }
 188
 189 int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size)
 190 {
 191         static struct mxl111sf_reg_ctrl_info init_i2s[] = {
 192                 {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */
 193                 {0x15, 0x60, 0x60}, /* Enable I2S */
 194                 {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB,
 195                                        Inverted 656 Clock, I2S_SOFT_RESET,
 196                                        0 : Normal operation, 1 : Reset State */
 197 #if 0
 198                 {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */
 199 #endif
 200                 {0x00, 0xff, 0x02}, /* Change to Control Page */
 201                 {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */
 202                 {0x00, 0xff, 0x00},
 203                 {0,    0,    0}
 204         };
 205         int ret;
 206
 207         mxl_debug("(0x%02x)", sample_size);
 208
 209         ret = mxl111sf_ctrl_program_regs(state, init_i2s);
 210         if (mxl_fail(ret))
 211                 goto fail;
 212
 213         ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size);
 214         mxl_fail(ret);
 215 fail:
 216         return ret;
 217 }
 218
 219 int mxl111sf_disable_i2s_port(struct mxl111sf_state *state)
 220 {
 221         static struct mxl111sf_reg_ctrl_info disable_i2s[] = {
 222                 {0x15, 0x40, 0x00},
 223                 {0,    0,    0}
 224         };
 225
 226         mxl_debug("()");
 227
 228         return mxl111sf_ctrl_program_regs(state, disable_i2s);
 229 }
 230
 231 int mxl111sf_config_i2s(struct mxl111sf_state *state,
 232                         u8 msb_start_pos, u8 data_width)
 233 {
 234         int ret;
 235         u8 tmp;
 236
 237         mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width);
 238
 239         ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp);
 240         if (mxl_fail(ret))
 241                 goto fail;
 242
 243         tmp &= 0xe0;
 244         tmp |= msb_start_pos;
 245         ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp);
 246         if (mxl_fail(ret))
 247                 goto fail;
 248
 249         ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp);
 250         if (mxl_fail(ret))
 251                 goto fail;
 252
 253         tmp &= 0xe0;
 254         tmp |= data_width;
 255         ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp);
 256         mxl_fail(ret);
 257 fail:
 258         return ret;
 259 }
 260
 261 int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff)
 262 {
 263         u8 val;
 264         int ret;
 265
 266         mxl_debug("(%d)", onoff);
 267
 268         ret = mxl111sf_write_reg(state, 0x00, 0x02);
 269         if (mxl_fail(ret))
 270                 goto fail;
 271
 272         ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val);
 273         if (mxl_fail(ret))
 274                 goto fail;
 275
 276         if (onoff)
 277                 val |= 0x04;
 278         else
 279                 val &= ~0x04;
 280
 281         ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val);
 282         if (mxl_fail(ret))
 283                 goto fail;
 284
 285         ret = mxl111sf_write_reg(state, 0x00, 0x00);
 286         mxl_fail(ret);
 287 fail:
 288         return ret;
 289 }
 290
 291 int mxl111sf_idac_config(struct mxl111sf_state *state,
 292                          u8 control_mode, u8 current_setting,
 293                          u8 current_value, u8 hysteresis_value)
 294 {
 295         int ret;
 296         u8 val;
 297         /* current value will be set for both automatic & manual IDAC control */
 298         val = current_value;
 299
 300         if (control_mode == IDAC_MANUAL_CONTROL) {
 301                 /* enable manual control of IDAC */
 302                 val |= IDAC_MANUAL_CONTROL_BIT_MASK;
 303
 304                 if (current_setting == IDAC_CURRENT_SINKING_ENABLE)
 305                         /* enable current sinking in manual mode */
 306                         val |= IDAC_CURRENT_SINKING_BIT_MASK;
 307                 else
 308                         /* disable current sinking in manual mode */
 309                         val &= ~IDAC_CURRENT_SINKING_BIT_MASK;
 310         } else {
 311                 /* disable manual control of IDAC */
 312                 val &= ~IDAC_MANUAL_CONTROL_BIT_MASK;
 313
 314                 /* set hysteresis value  reg: 0x0B<5:0> */
 315                 ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
 316                                          (hysteresis_value & 0x3F));
 317                 mxl_fail(ret);
 318         }
 319
 320         ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
 321         mxl_fail(ret);
 322
 323         return ret;
 324 }