1 // SPDX-License-Identifier: GPL-2.0-only
2 /* DVB USB compliant Linux driver for the
3 * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
5 * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
6 * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
8 * Thanks to GENPIX for the sample code used to implement this module.
10 * This module is based off the vp7045 and vp702x modules
12 * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
15 #include "gp8psk-fe.h"
18 static char bcm4500_firmware
[] = "dvb-usb-gp8psk-02.fw";
19 int dvb_usb_gp8psk_debug
;
20 module_param_named(debug
,dvb_usb_gp8psk_debug
, int, 0644);
21 MODULE_PARM_DESC(debug
, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS
);
23 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr
);
26 unsigned char data
[80];
29 static int gp8psk_usb_in_op(struct dvb_usb_device
*d
, u8 req
, u16 value
,
30 u16 index
, u8
*b
, int blen
)
32 struct gp8psk_state
*st
= d
->priv
;
35 if (blen
> sizeof(st
->data
))
38 if ((ret
= mutex_lock_interruptible(&d
->usb_mutex
)))
41 while (ret
>= 0 && ret
!= blen
&& try < 3) {
42 ret
= usb_control_msg(d
->udev
,
43 usb_rcvctrlpipe(d
->udev
,0),
45 USB_TYPE_VENDOR
| USB_DIR_IN
,
46 value
, index
, st
->data
, blen
,
48 deb_info("reading number %d (ret: %d)\n",try,ret
);
52 if (ret
< 0 || ret
!= blen
) {
53 warn("usb in %d operation failed.", req
);
57 memcpy(b
, st
->data
, blen
);
60 deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req
,value
,index
);
61 debug_dump(b
,blen
,deb_xfer
);
63 mutex_unlock(&d
->usb_mutex
);
68 static int gp8psk_usb_out_op(struct dvb_usb_device
*d
, u8 req
, u16 value
,
69 u16 index
, u8
*b
, int blen
)
71 struct gp8psk_state
*st
= d
->priv
;
74 deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req
,value
,index
);
75 debug_dump(b
,blen
,deb_xfer
);
77 if (blen
> sizeof(st
->data
))
80 if ((ret
= mutex_lock_interruptible(&d
->usb_mutex
)))
83 memcpy(st
->data
, b
, blen
);
84 if (usb_control_msg(d
->udev
,
85 usb_sndctrlpipe(d
->udev
,0),
87 USB_TYPE_VENDOR
| USB_DIR_OUT
,
88 value
, index
, st
->data
, blen
,
90 warn("usb out operation failed.");
94 mutex_unlock(&d
->usb_mutex
);
100 static int gp8psk_get_fw_version(struct dvb_usb_device
*d
, u8
*fw_vers
)
102 return gp8psk_usb_in_op(d
, GET_FW_VERS
, 0, 0, fw_vers
, 6);
105 static int gp8psk_get_fpga_version(struct dvb_usb_device
*d
, u8
*fpga_vers
)
107 return gp8psk_usb_in_op(d
, GET_FPGA_VERS
, 0, 0, fpga_vers
, 1);
110 static void gp8psk_info(struct dvb_usb_device
*d
)
112 u8 fpga_vers
, fw_vers
[6];
114 if (!gp8psk_get_fw_version(d
, fw_vers
))
115 info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i",
116 fw_vers
[2], fw_vers
[1], fw_vers
[0], GP8PSK_FW_VERS(fw_vers
),
117 2000 + fw_vers
[5], fw_vers
[4], fw_vers
[3]);
119 info("failed to get FW version");
121 if (!gp8psk_get_fpga_version(d
, &fpga_vers
))
122 info("FPGA Version = %i", fpga_vers
);
124 info("failed to get FPGA version");
127 static int gp8psk_load_bcm4500fw(struct dvb_usb_device
*d
)
130 const struct firmware
*fw
= NULL
;
133 if ((ret
= request_firmware(&fw
, bcm4500_firmware
,
134 &d
->udev
->dev
)) != 0) {
135 err("did not find the bcm4500 firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
136 bcm4500_firmware
,ret
);
142 if (gp8psk_usb_out_op(d
, LOAD_BCM4500
,1,0,NULL
, 0))
145 info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware
);
148 buf
= kmalloc(64, GFP_KERNEL
);
154 while (ptr
[0] != 0xff) {
155 u16 buflen
= ptr
[0] + 4;
156 if (ptr
+ buflen
>= fw
->data
+ fw
->size
) {
157 err("failed to load bcm4500 firmware.");
161 err("firmware chunk size bigger than 64 bytes.");
165 memcpy(buf
, ptr
, buflen
);
166 if (dvb_usb_generic_write(d
, buf
, buflen
)) {
167 err("failed to load bcm4500 firmware.");
178 release_firmware(fw
);
183 static int gp8psk_power_ctrl(struct dvb_usb_device
*d
, int onoff
)
186 int gp_product_id
= le16_to_cpu(d
->udev
->descriptor
.idProduct
);
189 gp8psk_usb_in_op(d
, GET_8PSK_CONFIG
,0,0,&status
,1);
190 if (! (status
& bm8pskStarted
)) { /* started */
191 if(gp_product_id
== USB_PID_GENPIX_SKYWALKER_CW3K
)
192 gp8psk_usb_out_op(d
, CW3K_INIT
, 1, 0, NULL
, 0);
193 if (gp8psk_usb_in_op(d
, BOOT_8PSK
, 1, 0, &buf
, 1))
198 if (gp_product_id
== USB_PID_GENPIX_8PSK_REV_1_WARM
)
199 if (! (status
& bm8pskFW_Loaded
)) /* BCM4500 firmware loaded */
200 if(gp8psk_load_bcm4500fw(d
))
203 if (! (status
& bmIntersilOn
)) /* LNB Power */
204 if (gp8psk_usb_in_op(d
, START_INTERSIL
, 1, 0,
208 /* Set DVB mode to 1 */
209 if (gp_product_id
== USB_PID_GENPIX_8PSK_REV_1_WARM
)
210 if (gp8psk_usb_out_op(d
, SET_DVB_MODE
, 1, 0, NULL
, 0))
212 /* Abort possible TS (if previous tune crashed) */
213 if (gp8psk_usb_out_op(d
, ARM_TRANSFER
, 0, 0, NULL
, 0))
216 /* Turn off LNB power */
217 if (gp8psk_usb_in_op(d
, START_INTERSIL
, 0, 0, &buf
, 1))
219 /* Turn off 8psk power */
220 if (gp8psk_usb_in_op(d
, BOOT_8PSK
, 0, 0, &buf
, 1))
222 if(gp_product_id
== USB_PID_GENPIX_SKYWALKER_CW3K
)
223 gp8psk_usb_out_op(d
, CW3K_INIT
, 0, 0, NULL
, 0);
228 static int gp8psk_bcm4500_reload(struct dvb_usb_device
*d
)
231 int gp_product_id
= le16_to_cpu(d
->udev
->descriptor
.idProduct
);
233 deb_xfer("reloading firmware\n");
235 /* Turn off 8psk power */
236 if (gp8psk_usb_in_op(d
, BOOT_8PSK
, 0, 0, &buf
, 1))
238 /* Turn On 8psk power */
239 if (gp8psk_usb_in_op(d
, BOOT_8PSK
, 1, 0, &buf
, 1))
241 /* load BCM4500 firmware */
242 if (gp_product_id
== USB_PID_GENPIX_8PSK_REV_1_WARM
)
243 if (gp8psk_load_bcm4500fw(d
))
248 static int gp8psk_streaming_ctrl(struct dvb_usb_adapter
*adap
, int onoff
)
250 return gp8psk_usb_out_op(adap
->dev
, ARM_TRANSFER
, onoff
, 0 , NULL
, 0);
253 /* Callbacks for gp8psk-fe.c */
255 static int gp8psk_fe_in(void *priv
, u8 req
, u16 value
,
256 u16 index
, u8
*b
, int blen
)
258 struct dvb_usb_device
*d
= priv
;
260 return gp8psk_usb_in_op(d
, req
, value
, index
, b
, blen
);
263 static int gp8psk_fe_out(void *priv
, u8 req
, u16 value
,
264 u16 index
, u8
*b
, int blen
)
266 struct dvb_usb_device
*d
= priv
;
268 return gp8psk_usb_out_op(d
, req
, value
, index
, b
, blen
);
271 static int gp8psk_fe_reload(void *priv
)
273 struct dvb_usb_device
*d
= priv
;
275 return gp8psk_bcm4500_reload(d
);
278 static const struct gp8psk_fe_ops gp8psk_fe_ops
= {
280 .out
= gp8psk_fe_out
,
281 .reload
= gp8psk_fe_reload
,
284 static int gp8psk_frontend_attach(struct dvb_usb_adapter
*adap
)
286 struct dvb_usb_device
*d
= adap
->dev
;
287 int id
= le16_to_cpu(d
->udev
->descriptor
.idProduct
);
290 is_rev1
= (id
== USB_PID_GENPIX_8PSK_REV_1_WARM
) ? true : false;
292 adap
->fe_adap
[0].fe
= dvb_attach(gp8psk_fe_attach
,
293 &gp8psk_fe_ops
, d
, is_rev1
);
297 static struct dvb_usb_device_properties gp8psk_properties
;
299 static int gp8psk_usb_probe(struct usb_interface
*intf
,
300 const struct usb_device_id
*id
)
303 struct usb_device
*udev
= interface_to_usbdev(intf
);
304 ret
= dvb_usb_device_init(intf
, &gp8psk_properties
,
305 THIS_MODULE
, NULL
, adapter_nr
);
307 info("found Genpix USB device pID = %x (hex)",
308 le16_to_cpu(udev
->descriptor
.idProduct
));
313 static struct usb_device_id gp8psk_usb_table
[] = {
314 { USB_DEVICE(USB_VID_GENPIX
, USB_PID_GENPIX_8PSK_REV_1_COLD
) },
315 { USB_DEVICE(USB_VID_GENPIX
, USB_PID_GENPIX_8PSK_REV_1_WARM
) },
316 { USB_DEVICE(USB_VID_GENPIX
, USB_PID_GENPIX_8PSK_REV_2
) },
317 { USB_DEVICE(USB_VID_GENPIX
, USB_PID_GENPIX_SKYWALKER_1
) },
318 { USB_DEVICE(USB_VID_GENPIX
, USB_PID_GENPIX_SKYWALKER_2
) },
319 /* { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */
322 MODULE_DEVICE_TABLE(usb
, gp8psk_usb_table
);
324 static struct dvb_usb_device_properties gp8psk_properties
= {
325 .usb_ctrl
= CYPRESS_FX2
,
326 .firmware
= "dvb-usb-gp8psk-01.fw",
328 .size_of_priv
= sizeof(struct gp8psk_state
),
335 .streaming_ctrl
= gp8psk_streaming_ctrl
,
336 .frontend_attach
= gp8psk_frontend_attach
,
337 /* parameter for the MPEG2-data transfer */
351 .power_ctrl
= gp8psk_power_ctrl
,
353 .generic_bulk_ctrl_endpoint
= 0x01,
355 .num_device_descs
= 4,
357 { .name
= "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
358 .cold_ids
= { &gp8psk_usb_table
[0], NULL
},
359 .warm_ids
= { &gp8psk_usb_table
[1], NULL
},
361 { .name
= "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
362 .cold_ids
= { NULL
},
363 .warm_ids
= { &gp8psk_usb_table
[2], NULL
},
365 { .name
= "Genpix SkyWalker-1 DVB-S receiver",
366 .cold_ids
= { NULL
},
367 .warm_ids
= { &gp8psk_usb_table
[3], NULL
},
369 { .name
= "Genpix SkyWalker-2 DVB-S receiver",
370 .cold_ids
= { NULL
},
371 .warm_ids
= { &gp8psk_usb_table
[4], NULL
},
377 /* usb specific object needed to register this driver with the usb subsystem */
378 static struct usb_driver gp8psk_usb_driver
= {
379 .name
= "dvb_usb_gp8psk",
380 .probe
= gp8psk_usb_probe
,
381 .disconnect
= dvb_usb_device_exit
,
382 .id_table
= gp8psk_usb_table
,
385 module_usb_driver(gp8psk_usb_driver
);
387 MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
388 MODULE_DESCRIPTION("Driver for Genpix DVB-S");
389 MODULE_VERSION("1.1");
390 MODULE_LICENSE("GPL");