?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux/fpc-iii.git] / drivers / pci / controller / pci-v3-semi.c
blob154a5398633ccb3a539a377583e02c2c0c2a4684
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Support for V3 Semiconductor PCI Local Bus to PCI Bridge
4 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
5 *
6 * Based on the code from arch/arm/mach-integrator/pci_v3.c
7 * Copyright (C) 1999 ARM Limited
8 * Copyright (C) 2000-2001 Deep Blue Solutions Ltd
9 *
10 * Contributors to the old driver include:
11 * Russell King <linux@armlinux.org.uk>
12 * David A. Rusling <david.rusling@linaro.org> (uHAL, ARM Firmware suite)
13 * Rob Herring <robh@kernel.org>
14 * Liviu Dudau <Liviu.Dudau@arm.com>
15 * Grant Likely <grant.likely@secretlab.ca>
16 * Arnd Bergmann <arnd@arndb.de>
17 * Bjorn Helgaas <bhelgaas@google.com>
18 */
19 #include <linux/init.h>
20 #include <linux/interrupt.h>
21 #include <linux/io.h>
22 #include <linux/kernel.h>
23 #include <linux/of_address.h>
24 #include <linux/of_device.h>
25 #include <linux/of_irq.h>
26 #include <linux/of_pci.h>
27 #include <linux/pci.h>
28 #include <linux/platform_device.h>
29 #include <linux/slab.h>
30 #include <linux/bitops.h>
31 #include <linux/irq.h>
32 #include <linux/mfd/syscon.h>
33 #include <linux/regmap.h>
34 #include <linux/clk.h>
35
36 #include "../pci.h"
37
38 #define V3_PCI_VENDOR 0x00000000
39 #define V3_PCI_DEVICE 0x00000002
40 #define V3_PCI_CMD 0x00000004
41 #define V3_PCI_STAT 0x00000006
42 #define V3_PCI_CC_REV 0x00000008
43 #define V3_PCI_HDR_CFG 0x0000000C
44 #define V3_PCI_IO_BASE 0x00000010
45 #define V3_PCI_BASE0 0x00000014
46 #define V3_PCI_BASE1 0x00000018
47 #define V3_PCI_SUB_VENDOR 0x0000002C
48 #define V3_PCI_SUB_ID 0x0000002E
49 #define V3_PCI_ROM 0x00000030
50 #define V3_PCI_BPARAM 0x0000003C
51 #define V3_PCI_MAP0 0x00000040
52 #define V3_PCI_MAP1 0x00000044
53 #define V3_PCI_INT_STAT 0x00000048
54 #define V3_PCI_INT_CFG 0x0000004C
55 #define V3_LB_BASE0 0x00000054
56 #define V3_LB_BASE1 0x00000058
57 #define V3_LB_MAP0 0x0000005E
58 #define V3_LB_MAP1 0x00000062
59 #define V3_LB_BASE2 0x00000064
60 #define V3_LB_MAP2 0x00000066
61 #define V3_LB_SIZE 0x00000068
62 #define V3_LB_IO_BASE 0x0000006E
63 #define V3_FIFO_CFG 0x00000070
64 #define V3_FIFO_PRIORITY 0x00000072
65 #define V3_FIFO_STAT 0x00000074
66 #define V3_LB_ISTAT 0x00000076
67 #define V3_LB_IMASK 0x00000077
68 #define V3_SYSTEM 0x00000078
69 #define V3_LB_CFG 0x0000007A
70 #define V3_PCI_CFG 0x0000007C
71 #define V3_DMA_PCI_ADR0 0x00000080
72 #define V3_DMA_PCI_ADR1 0x00000090
73 #define V3_DMA_LOCAL_ADR0 0x00000084
74 #define V3_DMA_LOCAL_ADR1 0x00000094
75 #define V3_DMA_LENGTH0 0x00000088
76 #define V3_DMA_LENGTH1 0x00000098
77 #define V3_DMA_CSR0 0x0000008B
78 #define V3_DMA_CSR1 0x0000009B
79 #define V3_DMA_CTLB_ADR0 0x0000008C
80 #define V3_DMA_CTLB_ADR1 0x0000009C
81 #define V3_DMA_DELAY 0x000000E0
82 #define V3_MAIL_DATA 0x000000C0
83 #define V3_PCI_MAIL_IEWR 0x000000D0
84 #define V3_PCI_MAIL_IERD 0x000000D2
85 #define V3_LB_MAIL_IEWR 0x000000D4
86 #define V3_LB_MAIL_IERD 0x000000D6
87 #define V3_MAIL_WR_STAT 0x000000D8
88 #define V3_MAIL_RD_STAT 0x000000DA
89 #define V3_QBA_MAP 0x000000DC
90
91 /* PCI STATUS bits */
92 #define V3_PCI_STAT_PAR_ERR BIT(15)
93 #define V3_PCI_STAT_SYS_ERR BIT(14)
94 #define V3_PCI_STAT_M_ABORT_ERR BIT(13)
95 #define V3_PCI_STAT_T_ABORT_ERR BIT(12)
96
97 /* LB ISTAT bits */
98 #define V3_LB_ISTAT_MAILBOX BIT(7)
99 #define V3_LB_ISTAT_PCI_RD BIT(6)
100 #define V3_LB_ISTAT_PCI_WR BIT(5)
101 #define V3_LB_ISTAT_PCI_INT BIT(4)
102 #define V3_LB_ISTAT_PCI_PERR BIT(3)
103 #define V3_LB_ISTAT_I2O_QWR BIT(2)
104 #define V3_LB_ISTAT_DMA1 BIT(1)
105 #define V3_LB_ISTAT_DMA0 BIT(0)
106
107 /* PCI COMMAND bits */
108 #define V3_COMMAND_M_FBB_EN BIT(9)
109 #define V3_COMMAND_M_SERR_EN BIT(8)
110 #define V3_COMMAND_M_PAR_EN BIT(6)
111 #define V3_COMMAND_M_MASTER_EN BIT(2)
112 #define V3_COMMAND_M_MEM_EN BIT(1)
113 #define V3_COMMAND_M_IO_EN BIT(0)
114
115 /* SYSTEM bits */
116 #define V3_SYSTEM_M_RST_OUT BIT(15)
117 #define V3_SYSTEM_M_LOCK BIT(14)
118 #define V3_SYSTEM_UNLOCK 0xa05f
119
120 /* PCI CFG bits */
121 #define V3_PCI_CFG_M_I2O_EN BIT(15)
122 #define V3_PCI_CFG_M_IO_REG_DIS BIT(14)
123 #define V3_PCI_CFG_M_IO_DIS BIT(13)
124 #define V3_PCI_CFG_M_EN3V BIT(12)
125 #define V3_PCI_CFG_M_RETRY_EN BIT(10)
126 #define V3_PCI_CFG_M_AD_LOW1 BIT(9)
127 #define V3_PCI_CFG_M_AD_LOW0 BIT(8)
128 /*
129 * This is the value applied to C/BE[3:1], with bit 0 always held 0
130 * during DMA access.
131 */
132 #define V3_PCI_CFG_M_RTYPE_SHIFT 5
133 #define V3_PCI_CFG_M_WTYPE_SHIFT 1
134 #define V3_PCI_CFG_TYPE_DEFAULT 0x3
135
136 /* PCI BASE bits (PCI -> Local Bus) */
137 #define V3_PCI_BASE_M_ADR_BASE 0xFFF00000U
138 #define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00U
139 #define V3_PCI_BASE_M_PREFETCH BIT(3)
140 #define V3_PCI_BASE_M_TYPE (3 << 1)
141 #define V3_PCI_BASE_M_IO BIT(0)
142
143 /* PCI MAP bits (PCI -> Local bus) */
144 #define V3_PCI_MAP_M_MAP_ADR 0xFFF00000U
145 #define V3_PCI_MAP_M_RD_POST_INH BIT(15)
146 #define V3_PCI_MAP_M_ROM_SIZE (3 << 10)
147 #define V3_PCI_MAP_M_SWAP (3 << 8)
148 #define V3_PCI_MAP_M_ADR_SIZE 0x000000F0U
149 #define V3_PCI_MAP_M_REG_EN BIT(1)
150 #define V3_PCI_MAP_M_ENABLE BIT(0)
151
152 /* LB_BASE0,1 bits (Local bus -> PCI) */
153 #define V3_LB_BASE_ADR_BASE 0xfff00000U
154 #define V3_LB_BASE_SWAP (3 << 8)
155 #define V3_LB_BASE_ADR_SIZE (15 << 4)
156 #define V3_LB_BASE_PREFETCH BIT(3)
157 #define V3_LB_BASE_ENABLE BIT(0)
158
159 #define V3_LB_BASE_ADR_SIZE_1MB (0 << 4)
160 #define V3_LB_BASE_ADR_SIZE_2MB (1 << 4)
161 #define V3_LB_BASE_ADR_SIZE_4MB (2 << 4)
162 #define V3_LB_BASE_ADR_SIZE_8MB (3 << 4)
163 #define V3_LB_BASE_ADR_SIZE_16MB (4 << 4)
164 #define V3_LB_BASE_ADR_SIZE_32MB (5 << 4)
165 #define V3_LB_BASE_ADR_SIZE_64MB (6 << 4)
166 #define V3_LB_BASE_ADR_SIZE_128MB (7 << 4)
167 #define V3_LB_BASE_ADR_SIZE_256MB (8 << 4)
168 #define V3_LB_BASE_ADR_SIZE_512MB (9 << 4)
169 #define V3_LB_BASE_ADR_SIZE_1GB (10 << 4)
170 #define V3_LB_BASE_ADR_SIZE_2GB (11 << 4)
171
172 #define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE)
173
174 /* LB_MAP0,1 bits (Local bus -> PCI) */
175 #define V3_LB_MAP_MAP_ADR 0xfff0U
176 #define V3_LB_MAP_TYPE (7 << 1)
177 #define V3_LB_MAP_AD_LOW_EN BIT(0)
178
179 #define V3_LB_MAP_TYPE_IACK (0 << 1)
180 #define V3_LB_MAP_TYPE_IO (1 << 1)
181 #define V3_LB_MAP_TYPE_MEM (3 << 1)
182 #define V3_LB_MAP_TYPE_CONFIG (5 << 1)
183 #define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1)
184
185 #define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR)
186
187 /* LB_BASE2 bits (Local bus -> PCI IO) */
188 #define V3_LB_BASE2_ADR_BASE 0xff00U
189 #define V3_LB_BASE2_SWAP_AUTO (3 << 6)
190 #define V3_LB_BASE2_ENABLE BIT(0)
191
192 #define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE)
193
194 /* LB_MAP2 bits (Local bus -> PCI IO) */
195 #define V3_LB_MAP2_MAP_ADR 0xff00U
196
197 #define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR)
198
199 /* FIFO priority bits */
200 #define V3_FIFO_PRIO_LOCAL BIT(12)
201 #define V3_FIFO_PRIO_LB_RD1_FLUSH_EOB BIT(10)
202 #define V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 BIT(11)
203 #define V3_FIFO_PRIO_LB_RD1_FLUSH_ANY (BIT(10)|BIT(11))
204 #define V3_FIFO_PRIO_LB_RD0_FLUSH_EOB BIT(8)
205 #define V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 BIT(9)
206 #define V3_FIFO_PRIO_LB_RD0_FLUSH_ANY (BIT(8)|BIT(9))
207 #define V3_FIFO_PRIO_PCI BIT(4)
208 #define V3_FIFO_PRIO_PCI_RD1_FLUSH_EOB BIT(2)
209 #define V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 BIT(3)
210 #define V3_FIFO_PRIO_PCI_RD1_FLUSH_ANY (BIT(2)|BIT(3))
211 #define V3_FIFO_PRIO_PCI_RD0_FLUSH_EOB BIT(0)
212 #define V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1 BIT(1)
213 #define V3_FIFO_PRIO_PCI_RD0_FLUSH_ANY (BIT(0)|BIT(1))
214
215 /* Local bus configuration bits */
216 #define V3_LB_CFG_LB_TO_64_CYCLES 0x0000
217 #define V3_LB_CFG_LB_TO_256_CYCLES BIT(13)
218 #define V3_LB_CFG_LB_TO_512_CYCLES BIT(14)
219 #define V3_LB_CFG_LB_TO_1024_CYCLES (BIT(13)|BIT(14))
220 #define V3_LB_CFG_LB_RST BIT(12)
221 #define V3_LB_CFG_LB_PPC_RDY BIT(11)
222 #define V3_LB_CFG_LB_LB_INT BIT(10)
223 #define V3_LB_CFG_LB_ERR_EN BIT(9)
224 #define V3_LB_CFG_LB_RDY_EN BIT(8)
225 #define V3_LB_CFG_LB_BE_IMODE BIT(7)
226 #define V3_LB_CFG_LB_BE_OMODE BIT(6)
227 #define V3_LB_CFG_LB_ENDIAN BIT(5)
228 #define V3_LB_CFG_LB_PARK_EN BIT(4)
229 #define V3_LB_CFG_LB_FBB_DIS BIT(2)
230
231 /* ARM Integrator-specific extended control registers */
232 #define INTEGRATOR_SC_PCI_OFFSET 0x18
233 #define INTEGRATOR_SC_PCI_ENABLE BIT(0)
234 #define INTEGRATOR_SC_PCI_INTCLR BIT(1)
235 #define INTEGRATOR_SC_LBFADDR_OFFSET 0x20
236 #define INTEGRATOR_SC_LBFCODE_OFFSET 0x24
237
238 struct v3_pci {
239 struct device *dev;
240 void __iomem *base;
241 void __iomem *config_base;
242 u32 config_mem;
243 u32 non_pre_mem;
244 u32 pre_mem;
245 phys_addr_t non_pre_bus_addr;
246 phys_addr_t pre_bus_addr;
247 struct regmap *map;
248 };
249
250 /*
251 * The V3 PCI interface chip in Integrator provides several windows from
252 * local bus memory into the PCI memory areas. Unfortunately, there
253 * are not really enough windows for our usage, therefore we reuse
254 * one of the windows for access to PCI configuration space. On the
255 * Integrator/AP, the memory map is as follows:
256 *
257 * Local Bus Memory Usage
258 *
259 * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
260 * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
261 * 60000000 - 60FFFFFF PCI IO. 16M
262 * 61000000 - 61FFFFFF PCI Configuration. 16M
263 *
264 * There are three V3 windows, each described by a pair of V3 registers.
265 * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
266 * Base0 and Base1 can be used for any type of PCI memory access. Base2
267 * can be used either for PCI I/O or for I20 accesses. By default, uHAL
268 * uses this only for PCI IO space.
269 *
270 * Normally these spaces are mapped using the following base registers:
271 *
272 * Usage Local Bus Memory Base/Map registers used
273 *
274 * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
275 * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
276 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
277 * Cfg 61000000 - 61FFFFFF
278 *
279 * This means that I20 and PCI configuration space accesses will fail.
280 * When PCI configuration accesses are needed (via the uHAL PCI
281 * configuration space primitives) we must remap the spaces as follows:
282 *
283 * Usage Local Bus Memory Base/Map registers used
284 *
285 * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
286 * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
287 * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
288 * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
289 *
290 * To make this work, the code depends on overlapping windows working.
291 * The V3 chip translates an address by checking its range within
292 * each of the BASE/MAP pairs in turn (in ascending register number
293 * order). It will use the first matching pair. So, for example,
294 * if the same address is mapped by both LB_BASE0/LB_MAP0 and
295 * LB_BASE1/LB_MAP1, the V3 will use the translation from
296 * LB_BASE0/LB_MAP0.
297 *
298 * To allow PCI Configuration space access, the code enlarges the
299 * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
300 * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
301 * be remapped for use by configuration cycles.
302 *
303 * At the end of the PCI Configuration space accesses,
304 * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
305 * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
306 * reveal the now restored LB_BASE1/LB_MAP1 window.
307 *
308 * NOTE: We do not set up I2O mapping. I suspect that this is only
309 * for an intelligent (target) device. Using I2O disables most of
310 * the mappings into PCI memory.
311 */
312 static void __iomem *v3_map_bus(struct pci_bus *bus,
313 unsigned int devfn, int offset)
314 {
315 struct v3_pci *v3 = bus->sysdata;
316 unsigned int address, mapaddress, busnr;
317
318 busnr = bus->number;
319 if (busnr == 0) {
320 int slot = PCI_SLOT(devfn);
321
322 /*
323 * local bus segment so need a type 0 config cycle
324 *
325 * build the PCI configuration "address" with one-hot in
326 * A31-A11
327 *
328 * mapaddress:
329 * 3:1 = config cycle (101)
330 * 0 = PCI A1 & A0 are 0 (0)
331 */
332 address = PCI_FUNC(devfn) << 8;
333 mapaddress = V3_LB_MAP_TYPE_CONFIG;
334
335 if (slot > 12)
336 /*
337 * high order bits are handled by the MAP register
338 */
339 mapaddress |= BIT(slot - 5);
340 else
341 /*
342 * low order bits handled directly in the address
343 */
344 address |= BIT(slot + 11);
345 } else {
346 /*
347 * not the local bus segment so need a type 1 config cycle
348 *
349 * address:
350 * 23:16 = bus number
351 * 15:11 = slot number (7:3 of devfn)
352 * 10:8 = func number (2:0 of devfn)
353 *
354 * mapaddress:
355 * 3:1 = config cycle (101)
356 * 0 = PCI A1 & A0 from host bus (1)
357 */
358 mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
359 address = (busnr << 16) | (devfn << 8);
360 }
361
362 /*
363 * Set up base0 to see all 512Mbytes of memory space (not
364 * prefetchable), this frees up base1 for re-use by
365 * configuration memory
366 */
367 writel(v3_addr_to_lb_base(v3->non_pre_mem) |
368 V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE,
369 v3->base + V3_LB_BASE0);
370
371 /*
372 * Set up base1/map1 to point into configuration space.
373 * The config mem is always 16MB.
374 */
375 writel(v3_addr_to_lb_base(v3->config_mem) |
376 V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE,
377 v3->base + V3_LB_BASE1);
378 writew(mapaddress, v3->base + V3_LB_MAP1);
379
380 return v3->config_base + address + offset;
381 }
382
383 static void v3_unmap_bus(struct v3_pci *v3)
384 {
385 /*
386 * Reassign base1 for use by prefetchable PCI memory
387 */
388 writel(v3_addr_to_lb_base(v3->pre_mem) |
389 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
390 V3_LB_BASE_ENABLE,
391 v3->base + V3_LB_BASE1);
392 writew(v3_addr_to_lb_map(v3->pre_bus_addr) |
393 V3_LB_MAP_TYPE_MEM, /* was V3_LB_MAP_TYPE_MEM_MULTIPLE */
394 v3->base + V3_LB_MAP1);
395
396 /*
397 * And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
398 */
399 writel(v3_addr_to_lb_base(v3->non_pre_mem) |
400 V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE,
401 v3->base + V3_LB_BASE0);
402 }
403
404 static int v3_pci_read_config(struct pci_bus *bus, unsigned int fn,
405 int config, int size, u32 *value)
406 {
407 struct v3_pci *v3 = bus->sysdata;
408 int ret;
409
410 dev_dbg(&bus->dev,
411 "[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
412 PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
413 ret = pci_generic_config_read(bus, fn, config, size, value);
414 v3_unmap_bus(v3);
415 return ret;
416 }
417
418 static int v3_pci_write_config(struct pci_bus *bus, unsigned int fn,
419 int config, int size, u32 value)
420 {
421 struct v3_pci *v3 = bus->sysdata;
422 int ret;
423
424 dev_dbg(&bus->dev,
425 "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
426 PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
427 ret = pci_generic_config_write(bus, fn, config, size, value);
428 v3_unmap_bus(v3);
429 return ret;
430 }
431
432 static struct pci_ops v3_pci_ops = {
433 .map_bus = v3_map_bus,
434 .read = v3_pci_read_config,
435 .write = v3_pci_write_config,
436 };
437
438 static irqreturn_t v3_irq(int irq, void *data)
439 {
440 struct v3_pci *v3 = data;
441 struct device *dev = v3->dev;
442 u32 status;
443
444 status = readw(v3->base + V3_PCI_STAT);
445 if (status & V3_PCI_STAT_PAR_ERR)
446 dev_err(dev, "parity error interrupt\n");
447 if (status & V3_PCI_STAT_SYS_ERR)
448 dev_err(dev, "system error interrupt\n");
449 if (status & V3_PCI_STAT_M_ABORT_ERR)
450 dev_err(dev, "master abort error interrupt\n");
451 if (status & V3_PCI_STAT_T_ABORT_ERR)
452 dev_err(dev, "target abort error interrupt\n");
453 writew(status, v3->base + V3_PCI_STAT);
454
455 status = readb(v3->base + V3_LB_ISTAT);
456 if (status & V3_LB_ISTAT_MAILBOX)
457 dev_info(dev, "PCI mailbox interrupt\n");
458 if (status & V3_LB_ISTAT_PCI_RD)
459 dev_err(dev, "PCI target LB->PCI READ abort interrupt\n");
460 if (status & V3_LB_ISTAT_PCI_WR)
461 dev_err(dev, "PCI target LB->PCI WRITE abort interrupt\n");
462 if (status & V3_LB_ISTAT_PCI_INT)
463 dev_info(dev, "PCI pin interrupt\n");
464 if (status & V3_LB_ISTAT_PCI_PERR)
465 dev_err(dev, "PCI parity error interrupt\n");
466 if (status & V3_LB_ISTAT_I2O_QWR)
467 dev_info(dev, "I2O inbound post queue interrupt\n");
468 if (status & V3_LB_ISTAT_DMA1)
469 dev_info(dev, "DMA channel 1 interrupt\n");
470 if (status & V3_LB_ISTAT_DMA0)
471 dev_info(dev, "DMA channel 0 interrupt\n");
472 /* Clear all possible interrupts on the local bus */
473 writeb(0, v3->base + V3_LB_ISTAT);
474 if (v3->map)
475 regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET,
476 INTEGRATOR_SC_PCI_ENABLE |
477 INTEGRATOR_SC_PCI_INTCLR);
478
479 return IRQ_HANDLED;
480 }
481
482 static int v3_integrator_init(struct v3_pci *v3)
483 {
484 unsigned int val;
485
486 v3->map =
487 syscon_regmap_lookup_by_compatible("arm,integrator-ap-syscon");
488 if (IS_ERR(v3->map)) {
489 dev_err(v3->dev, "no syscon\n");
490 return -ENODEV;
491 }
492
493 regmap_read(v3->map, INTEGRATOR_SC_PCI_OFFSET, &val);
494 /* Take the PCI bridge out of reset, clear IRQs */
495 regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET,
496 INTEGRATOR_SC_PCI_ENABLE |
497 INTEGRATOR_SC_PCI_INTCLR);
498
499 if (!(val & INTEGRATOR_SC_PCI_ENABLE)) {
500 /* If we were in reset we need to sleep a bit */
501 msleep(230);
502
503 /* Set the physical base for the controller itself */
504 writel(0x6200, v3->base + V3_LB_IO_BASE);
505
506 /* Wait for the mailbox to settle after reset */
507 do {
508 writeb(0xaa, v3->base + V3_MAIL_DATA);
509 writeb(0x55, v3->base + V3_MAIL_DATA + 4);
510 } while (readb(v3->base + V3_MAIL_DATA) != 0xaa &&
511 readb(v3->base + V3_MAIL_DATA) != 0x55);
512 }
513
514 dev_info(v3->dev, "initialized PCI V3 Integrator/AP integration\n");
515
516 return 0;
517 }
518
519 static int v3_pci_setup_resource(struct v3_pci *v3,
520 struct pci_host_bridge *host,
521 struct resource_entry *win)
522 {
523 struct device *dev = v3->dev;
524 struct resource *mem;
525 struct resource *io;
526
527 switch (resource_type(win->res)) {
528 case IORESOURCE_IO:
529 io = win->res;
530
531 /* Setup window 2 - PCI I/O */
532 writel(v3_addr_to_lb_base2(pci_pio_to_address(io->start)) |
533 V3_LB_BASE2_ENABLE,
534 v3->base + V3_LB_BASE2);
535 writew(v3_addr_to_lb_map2(io->start - win->offset),
536 v3->base + V3_LB_MAP2);
537 break;
538 case IORESOURCE_MEM:
539 mem = win->res;
540 if (mem->flags & IORESOURCE_PREFETCH) {
541 mem->name = "V3 PCI PRE-MEM";
542 v3->pre_mem = mem->start;
543 v3->pre_bus_addr = mem->start - win->offset;
544 dev_dbg(dev, "PREFETCHABLE MEM window %pR, bus addr %pap\n",
545 mem, &v3->pre_bus_addr);
546 if (resource_size(mem) != SZ_256M) {
547 dev_err(dev, "prefetchable memory range is not 256MB\n");
548 return -EINVAL;
549 }
550 if (v3->non_pre_mem &&
551 (mem->start != v3->non_pre_mem + SZ_256M)) {
552 dev_err(dev,
553 "prefetchable memory is not adjacent to non-prefetchable memory\n");
554 return -EINVAL;
555 }
556 /* Setup window 1 - PCI prefetchable memory */
557 writel(v3_addr_to_lb_base(v3->pre_mem) |
558 V3_LB_BASE_ADR_SIZE_256MB |
559 V3_LB_BASE_PREFETCH |
560 V3_LB_BASE_ENABLE,
561 v3->base + V3_LB_BASE1);
562 writew(v3_addr_to_lb_map(v3->pre_bus_addr) |
563 V3_LB_MAP_TYPE_MEM, /* Was V3_LB_MAP_TYPE_MEM_MULTIPLE */
564 v3->base + V3_LB_MAP1);
565 } else {
566 mem->name = "V3 PCI NON-PRE-MEM";
567 v3->non_pre_mem = mem->start;
568 v3->non_pre_bus_addr = mem->start - win->offset;
569 dev_dbg(dev, "NON-PREFETCHABLE MEM window %pR, bus addr %pap\n",
570 mem, &v3->non_pre_bus_addr);
571 if (resource_size(mem) != SZ_256M) {
572 dev_err(dev,
573 "non-prefetchable memory range is not 256MB\n");
574 return -EINVAL;
575 }
576 /* Setup window 0 - PCI non-prefetchable memory */
577 writel(v3_addr_to_lb_base(v3->non_pre_mem) |
578 V3_LB_BASE_ADR_SIZE_256MB |
579 V3_LB_BASE_ENABLE,
580 v3->base + V3_LB_BASE0);
581 writew(v3_addr_to_lb_map(v3->non_pre_bus_addr) |
582 V3_LB_MAP_TYPE_MEM,
583 v3->base + V3_LB_MAP0);
584 }
585 break;
586 case IORESOURCE_BUS:
587 break;
588 default:
589 dev_info(dev, "Unknown resource type %lu\n",
590 resource_type(win->res));
591 break;
592 }
593
594 return 0;
595 }
596
597 static int v3_get_dma_range_config(struct v3_pci *v3,
598 struct resource_entry *entry,
599 u32 *pci_base, u32 *pci_map)
600 {
601 struct device *dev = v3->dev;
602 u64 cpu_addr = entry->res->start;
603 u64 cpu_end = entry->res->end;
604 u64 pci_end = cpu_end - entry->offset;
605 u64 pci_addr = entry->res->start - entry->offset;
606 u32 val;
607
608 if (pci_addr & ~V3_PCI_BASE_M_ADR_BASE) {
609 dev_err(dev, "illegal range, only PCI bits 31..20 allowed\n");
610 return -EINVAL;
611 }
612 val = ((u32)pci_addr) & V3_PCI_BASE_M_ADR_BASE;
613 *pci_base = val;
614
615 if (cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) {
616 dev_err(dev, "illegal range, only CPU bits 31..20 allowed\n");
617 return -EINVAL;
618 }
619 val = ((u32)cpu_addr) & V3_PCI_MAP_M_MAP_ADR;
620
621 switch (resource_size(entry->res)) {
622 case SZ_1M:
623 val |= V3_LB_BASE_ADR_SIZE_1MB;
624 break;
625 case SZ_2M:
626 val |= V3_LB_BASE_ADR_SIZE_2MB;
627 break;
628 case SZ_4M:
629 val |= V3_LB_BASE_ADR_SIZE_4MB;
630 break;
631 case SZ_8M:
632 val |= V3_LB_BASE_ADR_SIZE_8MB;
633 break;
634 case SZ_16M:
635 val |= V3_LB_BASE_ADR_SIZE_16MB;
636 break;
637 case SZ_32M:
638 val |= V3_LB_BASE_ADR_SIZE_32MB;
639 break;
640 case SZ_64M:
641 val |= V3_LB_BASE_ADR_SIZE_64MB;
642 break;
643 case SZ_128M:
644 val |= V3_LB_BASE_ADR_SIZE_128MB;
645 break;
646 case SZ_256M:
647 val |= V3_LB_BASE_ADR_SIZE_256MB;
648 break;
649 case SZ_512M:
650 val |= V3_LB_BASE_ADR_SIZE_512MB;
651 break;
652 case SZ_1G:
653 val |= V3_LB_BASE_ADR_SIZE_1GB;
654 break;
655 case SZ_2G:
656 val |= V3_LB_BASE_ADR_SIZE_2GB;
657 break;
658 default:
659 dev_err(v3->dev, "illegal dma memory chunk size\n");
660 return -EINVAL;
661 }
662 val |= V3_PCI_MAP_M_REG_EN | V3_PCI_MAP_M_ENABLE;
663 *pci_map = val;
664
665 dev_dbg(dev,
666 "DMA MEM CPU: 0x%016llx -> 0x%016llx => "
667 "PCI: 0x%016llx -> 0x%016llx base %08x map %08x\n",
668 cpu_addr, cpu_end,
669 pci_addr, pci_end,
670 *pci_base, *pci_map);
671
672 return 0;
673 }
674
675 static int v3_pci_parse_map_dma_ranges(struct v3_pci *v3,
676 struct device_node *np)
677 {
678 struct pci_host_bridge *bridge = pci_host_bridge_from_priv(v3);
679 struct device *dev = v3->dev;
680 struct resource_entry *entry;
681 int i = 0;
682
683 resource_list_for_each_entry(entry, &bridge->dma_ranges) {
684 int ret;
685 u32 pci_base, pci_map;
686
687 ret = v3_get_dma_range_config(v3, entry, &pci_base, &pci_map);
688 if (ret)
689 return ret;
690
691 if (i == 0) {
692 writel(pci_base, v3->base + V3_PCI_BASE0);
693 writel(pci_map, v3->base + V3_PCI_MAP0);
694 } else if (i == 1) {
695 writel(pci_base, v3->base + V3_PCI_BASE1);
696 writel(pci_map, v3->base + V3_PCI_MAP1);
697 } else {
698 dev_err(dev, "too many ranges, only two supported\n");
699 dev_err(dev, "range %d ignored\n", i);
700 }
701 i++;
702 }
703 return 0;
704 }
705
706 static int v3_pci_probe(struct platform_device *pdev)
707 {
708 struct device *dev = &pdev->dev;
709 struct device_node *np = dev->of_node;
710 struct resource *regs;
711 struct resource_entry *win;
712 struct v3_pci *v3;
713 struct pci_host_bridge *host;
714 struct clk *clk;
715 u16 val;
716 int irq;
717 int ret;
718
719 host = devm_pci_alloc_host_bridge(dev, sizeof(*v3));
720 if (!host)
721 return -ENOMEM;
722
723 host->ops = &v3_pci_ops;
724 v3 = pci_host_bridge_priv(host);
725 host->sysdata = v3;
726 v3->dev = dev;
727
728 /* Get and enable host clock */
729 clk = devm_clk_get(dev, NULL);
730 if (IS_ERR(clk)) {
731 dev_err(dev, "clock not found\n");
732 return PTR_ERR(clk);
733 }
734 ret = clk_prepare_enable(clk);
735 if (ret) {
736 dev_err(dev, "unable to enable clock\n");
737 return ret;
738 }
739
740 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
741 v3->base = devm_ioremap_resource(dev, regs);
742 if (IS_ERR(v3->base))
743 return PTR_ERR(v3->base);
744 /*
745 * The hardware has a register with the physical base address
746 * of the V3 controller itself, verify that this is the same
747 * as the physical memory we've remapped it from.
748 */
749 if (readl(v3->base + V3_LB_IO_BASE) != (regs->start >> 16))
750 dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%pR\n",
751 readl(v3->base + V3_LB_IO_BASE), regs);
752
753 /* Configuration space is 16MB directly mapped */
754 regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
755 if (resource_size(regs) != SZ_16M) {
756 dev_err(dev, "config mem is not 16MB!\n");
757 return -EINVAL;
758 }
759 v3->config_mem = regs->start;
760 v3->config_base = devm_ioremap_resource(dev, regs);
761 if (IS_ERR(v3->config_base))
762 return PTR_ERR(v3->config_base);
763
764 /* Get and request error IRQ resource */
765 irq = platform_get_irq(pdev, 0);
766 if (irq < 0)
767 return irq;
768
769 ret = devm_request_irq(dev, irq, v3_irq, 0,
770 "PCIv3 error", v3);
771 if (ret < 0) {
772 dev_err(dev,
773 "unable to request PCIv3 error IRQ %d (%d)\n",
774 irq, ret);
775 return ret;
776 }
777
778 /*
779 * Unlock V3 registers, but only if they were previously locked.
780 */
781 if (readw(v3->base + V3_SYSTEM) & V3_SYSTEM_M_LOCK)
782 writew(V3_SYSTEM_UNLOCK, v3->base + V3_SYSTEM);
783
784 /* Disable all slave access while we set up the windows */
785 val = readw(v3->base + V3_PCI_CMD);
786 val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
787 writew(val, v3->base + V3_PCI_CMD);
788
789 /* Put the PCI bus into reset */
790 val = readw(v3->base + V3_SYSTEM);
791 val &= ~V3_SYSTEM_M_RST_OUT;
792 writew(val, v3->base + V3_SYSTEM);
793
794 /* Retry until we're ready */
795 val = readw(v3->base + V3_PCI_CFG);
796 val |= V3_PCI_CFG_M_RETRY_EN;
797 writew(val, v3->base + V3_PCI_CFG);
798
799 /* Set up the local bus protocol */
800 val = readw(v3->base + V3_LB_CFG);
801 val |= V3_LB_CFG_LB_BE_IMODE; /* Byte enable input */
802 val |= V3_LB_CFG_LB_BE_OMODE; /* Byte enable output */
803 val &= ~V3_LB_CFG_LB_ENDIAN; /* Little endian */
804 val &= ~V3_LB_CFG_LB_PPC_RDY; /* TODO: when using on PPC403Gx, set to 1 */
805 writew(val, v3->base + V3_LB_CFG);
806
807 /* Enable the PCI bus master */
808 val = readw(v3->base + V3_PCI_CMD);
809 val |= PCI_COMMAND_MASTER;
810 writew(val, v3->base + V3_PCI_CMD);
811
812 /* Get the I/O and memory ranges from DT */
813 resource_list_for_each_entry(win, &host->windows) {
814 ret = v3_pci_setup_resource(v3, host, win);
815 if (ret) {
816 dev_err(dev, "error setting up resources\n");
817 return ret;
818 }
819 }
820 ret = v3_pci_parse_map_dma_ranges(v3, np);
821 if (ret)
822 return ret;
823
824 /*
825 * Disable PCI to host IO cycles, enable I/O buffers @3.3V,
826 * set AD_LOW0 to 1 if one of the LB_MAP registers choose
827 * to use this (should be unused).
828 */
829 writel(0x00000000, v3->base + V3_PCI_IO_BASE);
830 val = V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS |
831 V3_PCI_CFG_M_EN3V | V3_PCI_CFG_M_AD_LOW0;
832 /*
833 * DMA read and write from PCI bus commands types
834 */
835 val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_RTYPE_SHIFT;
836 val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_WTYPE_SHIFT;
837 writew(val, v3->base + V3_PCI_CFG);
838
839 /*
840 * Set the V3 FIFO such that writes have higher priority than
841 * reads, and local bus write causes local bus read fifo flush
842 * on aperture 1. Same for PCI.
843 */
844 writew(V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 |
845 V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 |
846 V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 |
847 V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1,
848 v3->base + V3_FIFO_PRIORITY);
849
850
851 /*
852 * Clear any error interrupts, and enable parity and write error
853 * interrupts
854 */
855 writeb(0, v3->base + V3_LB_ISTAT);
856 val = readw(v3->base + V3_LB_CFG);
857 val |= V3_LB_CFG_LB_LB_INT;
858 writew(val, v3->base + V3_LB_CFG);
859 writeb(V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR,
860 v3->base + V3_LB_IMASK);
861
862 /* Special Integrator initialization */
863 if (of_device_is_compatible(np, "arm,integrator-ap-pci")) {
864 ret = v3_integrator_init(v3);
865 if (ret)
866 return ret;
867 }
868
869 /* Post-init: enable PCI memory and invalidate (master already on) */
870 val = readw(v3->base + V3_PCI_CMD);
871 val |= PCI_COMMAND_MEMORY | PCI_COMMAND_INVALIDATE;
872 writew(val, v3->base + V3_PCI_CMD);
873
874 /* Clear pending interrupts */
875 writeb(0, v3->base + V3_LB_ISTAT);
876 /* Read or write errors and parity errors cause interrupts */
877 writeb(V3_LB_ISTAT_PCI_RD | V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR,
878 v3->base + V3_LB_IMASK);
879
880 /* Take the PCI bus out of reset so devices can initialize */
881 val = readw(v3->base + V3_SYSTEM);
882 val |= V3_SYSTEM_M_RST_OUT;
883 writew(val, v3->base + V3_SYSTEM);
884
885 /*
886 * Re-lock the system register.
887 */
888 val = readw(v3->base + V3_SYSTEM);
889 val |= V3_SYSTEM_M_LOCK;
890 writew(val, v3->base + V3_SYSTEM);
891
892 return pci_host_probe(host);
893 }
894
895 static const struct of_device_id v3_pci_of_match[] = {
896 {
897 .compatible = "v3,v360epc-pci",
898 },
899 {},
900 };
901
902 static struct platform_driver v3_pci_driver = {
903 .driver = {
904 .name = "pci-v3-semi",
905 .of_match_table = of_match_ptr(v3_pci_of_match),
906 .suppress_bind_attrs = true,
907 },
908 .probe = v3_pci_probe,
909 };
910 builtin_platform_driver(v3_pci_driver);
Linux with added FPC-III support