?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux/fpc-iii.git] / drivers / pci / hotplug / ibmphp_hpc.c
blob508a62a6b5f9da4088e1dd963e619f717c8cc645
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * IBM Hot Plug Controller Driver
4 *
5 * Written By: Jyoti Shah, IBM Corporation
6 *
7 * Copyright (C) 2001-2003 IBM Corp.
8 *
9 * All rights reserved.
10 *
11 * Send feedback to <gregkh@us.ibm.com>
12 * <jshah@us.ibm.com>
13 *
14 */
15
16 #include <linux/wait.h>
17 #include <linux/time.h>
18 #include <linux/completion.h>
19 #include <linux/delay.h>
20 #include <linux/module.h>
21 #include <linux/pci.h>
22 #include <linux/init.h>
23 #include <linux/mutex.h>
24 #include <linux/sched.h>
25 #include <linux/kthread.h>
26 #include "ibmphp.h"
27
28 static int to_debug = 0;
29 #define debug_polling(fmt, arg...) do { if (to_debug) debug(fmt, arg); } while (0)
30
31 //----------------------------------------------------------------------------
32 // timeout values
33 //----------------------------------------------------------------------------
34 #define CMD_COMPLETE_TOUT_SEC 60 // give HPC 60 sec to finish cmd
35 #define HPC_CTLR_WORKING_TOUT 60 // give HPC 60 sec to finish cmd
36 #define HPC_GETACCESS_TIMEOUT 60 // seconds
37 #define POLL_INTERVAL_SEC 2 // poll HPC every 2 seconds
38 #define POLL_LATCH_CNT 5 // poll latch 5 times, then poll slots
39
40 //----------------------------------------------------------------------------
41 // Winnipeg Architected Register Offsets
42 //----------------------------------------------------------------------------
43 #define WPG_I2CMBUFL_OFFSET 0x08 // I2C Message Buffer Low
44 #define WPG_I2CMOSUP_OFFSET 0x10 // I2C Master Operation Setup Reg
45 #define WPG_I2CMCNTL_OFFSET 0x20 // I2C Master Control Register
46 #define WPG_I2CPARM_OFFSET 0x40 // I2C Parameter Register
47 #define WPG_I2CSTAT_OFFSET 0x70 // I2C Status Register
48
49 //----------------------------------------------------------------------------
50 // Winnipeg Store Type commands (Add this commands to the register offset)
51 //----------------------------------------------------------------------------
52 #define WPG_I2C_AND 0x1000 // I2C AND operation
53 #define WPG_I2C_OR 0x2000 // I2C OR operation
54
55 //----------------------------------------------------------------------------
56 // Command set for I2C Master Operation Setup Register
57 //----------------------------------------------------------------------------
58 #define WPG_READATADDR_MASK 0x00010000 // read,bytes,I2C shifted,index
59 #define WPG_WRITEATADDR_MASK 0x40010000 // write,bytes,I2C shifted,index
60 #define WPG_READDIRECT_MASK 0x10010000
61 #define WPG_WRITEDIRECT_MASK 0x60010000
62
63
64 //----------------------------------------------------------------------------
65 // bit masks for I2C Master Control Register
66 //----------------------------------------------------------------------------
67 #define WPG_I2CMCNTL_STARTOP_MASK 0x00000002 // Start the Operation
68
69 //----------------------------------------------------------------------------
70 //
71 //----------------------------------------------------------------------------
72 #define WPG_I2C_IOREMAP_SIZE 0x2044 // size of linear address interval
73
74 //----------------------------------------------------------------------------
75 // command index
76 //----------------------------------------------------------------------------
77 #define WPG_1ST_SLOT_INDEX 0x01 // index - 1st slot for ctlr
78 #define WPG_CTLR_INDEX 0x0F // index - ctlr
79 #define WPG_1ST_EXTSLOT_INDEX 0x10 // index - 1st ext slot for ctlr
80 #define WPG_1ST_BUS_INDEX 0x1F // index - 1st bus for ctlr
81
82 //----------------------------------------------------------------------------
83 // macro utilities
84 //----------------------------------------------------------------------------
85 // if bits 20,22,25,26,27,29,30 are OFF return 1
86 #define HPC_I2CSTATUS_CHECK(s) ((u8)((s & 0x00000A76) ? 0 : 1))
87
88 //----------------------------------------------------------------------------
89 // global variables
90 //----------------------------------------------------------------------------
91 static DEFINE_MUTEX(sem_hpcaccess); // lock access to HPC
92 static DEFINE_MUTEX(operations_mutex); // lock all operations and
93 // access to data structures
94 static DECLARE_COMPLETION(exit_complete); // make sure polling thread goes away
95 static struct task_struct *ibmphp_poll_thread;
96 //----------------------------------------------------------------------------
97 // local function prototypes
98 //----------------------------------------------------------------------------
99 static u8 i2c_ctrl_read(struct controller *, void __iomem *, u8);
100 static u8 i2c_ctrl_write(struct controller *, void __iomem *, u8, u8);
101 static u8 hpc_writecmdtoindex(u8, u8);
102 static u8 hpc_readcmdtoindex(u8, u8);
103 static void get_hpc_access(void);
104 static void free_hpc_access(void);
105 static int poll_hpc(void *data);
106 static int process_changeinstatus(struct slot *, struct slot *);
107 static int process_changeinlatch(u8, u8, struct controller *);
108 static int hpc_wait_ctlr_notworking(int, struct controller *, void __iomem *, u8 *);
109 //----------------------------------------------------------------------------
110
111
112 /*----------------------------------------------------------------------
113 * Name: i2c_ctrl_read
114 *
115 * Action: read from HPC over I2C
116 *
117 *---------------------------------------------------------------------*/
118 static u8 i2c_ctrl_read(struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
119 {
120 u8 status;
121 int i;
122 void __iomem *wpg_addr; // base addr + offset
123 unsigned long wpg_data; // data to/from WPG LOHI format
124 unsigned long ultemp;
125 unsigned long data; // actual data HILO format
126
127 debug_polling("%s - Entry WPGBbar[%p] index[%x] \n", __func__, WPGBbar, index);
128
129 //--------------------------------------------------------------------
130 // READ - step 1
131 // read at address, byte length, I2C address (shifted), index
132 // or read direct, byte length, index
133 if (ctlr_ptr->ctlr_type == 0x02) {
134 data = WPG_READATADDR_MASK;
135 // fill in I2C address
136 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
137 ultemp = ultemp >> 1;
138 data |= (ultemp << 8);
139
140 // fill in index
141 data |= (unsigned long)index;
142 } else if (ctlr_ptr->ctlr_type == 0x04) {
143 data = WPG_READDIRECT_MASK;
144
145 // fill in index
146 ultemp = (unsigned long)index;
147 ultemp = ultemp << 8;
148 data |= ultemp;
149 } else {
150 err("this controller type is not supported \n");
151 return HPC_ERROR;
152 }
153
154 wpg_data = swab32(data); // swap data before writing
155 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
156 writel(wpg_data, wpg_addr);
157
158 //--------------------------------------------------------------------
159 // READ - step 2 : clear the message buffer
160 data = 0x00000000;
161 wpg_data = swab32(data);
162 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
163 writel(wpg_data, wpg_addr);
164
165 //--------------------------------------------------------------------
166 // READ - step 3 : issue start operation, I2C master control bit 30:ON
167 // 2020 : [20] OR operation at [20] offset 0x20
168 data = WPG_I2CMCNTL_STARTOP_MASK;
169 wpg_data = swab32(data);
170 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
171 writel(wpg_data, wpg_addr);
172
173 //--------------------------------------------------------------------
174 // READ - step 4 : wait until start operation bit clears
175 i = CMD_COMPLETE_TOUT_SEC;
176 while (i) {
177 msleep(10);
178 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
179 wpg_data = readl(wpg_addr);
180 data = swab32(wpg_data);
181 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
182 break;
183 i--;
184 }
185 if (i == 0) {
186 debug("%s - Error : WPG timeout\n", __func__);
187 return HPC_ERROR;
188 }
189 //--------------------------------------------------------------------
190 // READ - step 5 : read I2C status register
191 i = CMD_COMPLETE_TOUT_SEC;
192 while (i) {
193 msleep(10);
194 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
195 wpg_data = readl(wpg_addr);
196 data = swab32(wpg_data);
197 if (HPC_I2CSTATUS_CHECK(data))
198 break;
199 i--;
200 }
201 if (i == 0) {
202 debug("ctrl_read - Exit Error:I2C timeout\n");
203 return HPC_ERROR;
204 }
205
206 //--------------------------------------------------------------------
207 // READ - step 6 : get DATA
208 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
209 wpg_data = readl(wpg_addr);
210 data = swab32(wpg_data);
211
212 status = (u8) data;
213
214 debug_polling("%s - Exit index[%x] status[%x]\n", __func__, index, status);
215
216 return (status);
217 }
218
219 /*----------------------------------------------------------------------
220 * Name: i2c_ctrl_write
221 *
222 * Action: write to HPC over I2C
223 *
224 * Return 0 or error codes
225 *---------------------------------------------------------------------*/
226 static u8 i2c_ctrl_write(struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
227 {
228 u8 rc;
229 void __iomem *wpg_addr; // base addr + offset
230 unsigned long wpg_data; // data to/from WPG LOHI format
231 unsigned long ultemp;
232 unsigned long data; // actual data HILO format
233 int i;
234
235 debug_polling("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __func__, WPGBbar, index, cmd);
236
237 rc = 0;
238 //--------------------------------------------------------------------
239 // WRITE - step 1
240 // write at address, byte length, I2C address (shifted), index
241 // or write direct, byte length, index
242 data = 0x00000000;
243
244 if (ctlr_ptr->ctlr_type == 0x02) {
245 data = WPG_WRITEATADDR_MASK;
246 // fill in I2C address
247 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
248 ultemp = ultemp >> 1;
249 data |= (ultemp << 8);
250
251 // fill in index
252 data |= (unsigned long)index;
253 } else if (ctlr_ptr->ctlr_type == 0x04) {
254 data = WPG_WRITEDIRECT_MASK;
255
256 // fill in index
257 ultemp = (unsigned long)index;
258 ultemp = ultemp << 8;
259 data |= ultemp;
260 } else {
261 err("this controller type is not supported \n");
262 return HPC_ERROR;
263 }
264
265 wpg_data = swab32(data); // swap data before writing
266 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
267 writel(wpg_data, wpg_addr);
268
269 //--------------------------------------------------------------------
270 // WRITE - step 2 : clear the message buffer
271 data = 0x00000000 | (unsigned long)cmd;
272 wpg_data = swab32(data);
273 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
274 writel(wpg_data, wpg_addr);
275
276 //--------------------------------------------------------------------
277 // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
278 // 2020 : [20] OR operation at [20] offset 0x20
279 data = WPG_I2CMCNTL_STARTOP_MASK;
280 wpg_data = swab32(data);
281 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
282 writel(wpg_data, wpg_addr);
283
284 //--------------------------------------------------------------------
285 // WRITE - step 4 : wait until start operation bit clears
286 i = CMD_COMPLETE_TOUT_SEC;
287 while (i) {
288 msleep(10);
289 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
290 wpg_data = readl(wpg_addr);
291 data = swab32(wpg_data);
292 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
293 break;
294 i--;
295 }
296 if (i == 0) {
297 debug("%s - Exit Error:WPG timeout\n", __func__);
298 rc = HPC_ERROR;
299 }
300
301 //--------------------------------------------------------------------
302 // WRITE - step 5 : read I2C status register
303 i = CMD_COMPLETE_TOUT_SEC;
304 while (i) {
305 msleep(10);
306 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
307 wpg_data = readl(wpg_addr);
308 data = swab32(wpg_data);
309 if (HPC_I2CSTATUS_CHECK(data))
310 break;
311 i--;
312 }
313 if (i == 0) {
314 debug("ctrl_read - Error : I2C timeout\n");
315 rc = HPC_ERROR;
316 }
317
318 debug_polling("%s Exit rc[%x]\n", __func__, rc);
319 return (rc);
320 }
321
322 //------------------------------------------------------------
323 // Read from ISA type HPC
324 //------------------------------------------------------------
325 static u8 isa_ctrl_read(struct controller *ctlr_ptr, u8 offset)
326 {
327 u16 start_address;
328 u16 end_address;
329 u8 data;
330
331 start_address = ctlr_ptr->u.isa_ctlr.io_start;
332 end_address = ctlr_ptr->u.isa_ctlr.io_end;
333 data = inb(start_address + offset);
334 return data;
335 }
336
337 //--------------------------------------------------------------
338 // Write to ISA type HPC
339 //--------------------------------------------------------------
340 static void isa_ctrl_write(struct controller *ctlr_ptr, u8 offset, u8 data)
341 {
342 u16 start_address;
343 u16 port_address;
344
345 start_address = ctlr_ptr->u.isa_ctlr.io_start;
346 port_address = start_address + (u16) offset;
347 outb(data, port_address);
348 }
349
350 static u8 pci_ctrl_read(struct controller *ctrl, u8 offset)
351 {
352 u8 data = 0x00;
353 debug("inside pci_ctrl_read\n");
354 if (ctrl->ctrl_dev)
355 pci_read_config_byte(ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
356 return data;
357 }
358
359 static u8 pci_ctrl_write(struct controller *ctrl, u8 offset, u8 data)
360 {
361 u8 rc = -ENODEV;
362 debug("inside pci_ctrl_write\n");
363 if (ctrl->ctrl_dev) {
364 pci_write_config_byte(ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
365 rc = 0;
366 }
367 return rc;
368 }
369
370 static u8 ctrl_read(struct controller *ctlr, void __iomem *base, u8 offset)
371 {
372 u8 rc;
373 switch (ctlr->ctlr_type) {
374 case 0:
375 rc = isa_ctrl_read(ctlr, offset);
376 break;
377 case 1:
378 rc = pci_ctrl_read(ctlr, offset);
379 break;
380 case 2:
381 case 4:
382 rc = i2c_ctrl_read(ctlr, base, offset);
383 break;
384 default:
385 return -ENODEV;
386 }
387 return rc;
388 }
389
390 static u8 ctrl_write(struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
391 {
392 u8 rc = 0;
393 switch (ctlr->ctlr_type) {
394 case 0:
395 isa_ctrl_write(ctlr, offset, data);
396 break;
397 case 1:
398 rc = pci_ctrl_write(ctlr, offset, data);
399 break;
400 case 2:
401 case 4:
402 rc = i2c_ctrl_write(ctlr, base, offset, data);
403 break;
404 default:
405 return -ENODEV;
406 }
407 return rc;
408 }
409 /*----------------------------------------------------------------------
410 * Name: hpc_writecmdtoindex()
411 *
412 * Action: convert a write command to proper index within a controller
413 *
414 * Return index, HPC_ERROR
415 *---------------------------------------------------------------------*/
416 static u8 hpc_writecmdtoindex(u8 cmd, u8 index)
417 {
418 u8 rc;
419
420 switch (cmd) {
421 case HPC_CTLR_ENABLEIRQ: // 0x00.N.15
422 case HPC_CTLR_CLEARIRQ: // 0x06.N.15
423 case HPC_CTLR_RESET: // 0x07.N.15
424 case HPC_CTLR_IRQSTEER: // 0x08.N.15
425 case HPC_CTLR_DISABLEIRQ: // 0x01.N.15
426 case HPC_ALLSLOT_ON: // 0x11.N.15
427 case HPC_ALLSLOT_OFF: // 0x12.N.15
428 rc = 0x0F;
429 break;
430
431 case HPC_SLOT_OFF: // 0x02.Y.0-14
432 case HPC_SLOT_ON: // 0x03.Y.0-14
433 case HPC_SLOT_ATTNOFF: // 0x04.N.0-14
434 case HPC_SLOT_ATTNON: // 0x05.N.0-14
435 case HPC_SLOT_BLINKLED: // 0x13.N.0-14
436 rc = index;
437 break;
438
439 case HPC_BUS_33CONVMODE:
440 case HPC_BUS_66CONVMODE:
441 case HPC_BUS_66PCIXMODE:
442 case HPC_BUS_100PCIXMODE:
443 case HPC_BUS_133PCIXMODE:
444 rc = index + WPG_1ST_BUS_INDEX - 1;
445 break;
446
447 default:
448 err("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
449 rc = HPC_ERROR;
450 }
451
452 return rc;
453 }
454
455 /*----------------------------------------------------------------------
456 * Name: hpc_readcmdtoindex()
457 *
458 * Action: convert a read command to proper index within a controller
459 *
460 * Return index, HPC_ERROR
461 *---------------------------------------------------------------------*/
462 static u8 hpc_readcmdtoindex(u8 cmd, u8 index)
463 {
464 u8 rc;
465
466 switch (cmd) {
467 case READ_CTLRSTATUS:
468 rc = 0x0F;
469 break;
470 case READ_SLOTSTATUS:
471 case READ_ALLSTAT:
472 rc = index;
473 break;
474 case READ_EXTSLOTSTATUS:
475 rc = index + WPG_1ST_EXTSLOT_INDEX;
476 break;
477 case READ_BUSSTATUS:
478 rc = index + WPG_1ST_BUS_INDEX - 1;
479 break;
480 case READ_SLOTLATCHLOWREG:
481 rc = 0x28;
482 break;
483 case READ_REVLEVEL:
484 rc = 0x25;
485 break;
486 case READ_HPCOPTIONS:
487 rc = 0x27;
488 break;
489 default:
490 rc = HPC_ERROR;
491 }
492 return rc;
493 }
494
495 /*----------------------------------------------------------------------
496 * Name: HPCreadslot()
497 *
498 * Action: issue a READ command to HPC
499 *
500 * Input: pslot - cannot be NULL for READ_ALLSTAT
501 * pstatus - can be NULL for READ_ALLSTAT
502 *
503 * Return 0 or error codes
504 *---------------------------------------------------------------------*/
505 int ibmphp_hpc_readslot(struct slot *pslot, u8 cmd, u8 *pstatus)
506 {
507 void __iomem *wpg_bbar = NULL;
508 struct controller *ctlr_ptr;
509 u8 index, status;
510 int rc = 0;
511 int busindex;
512
513 debug_polling("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __func__, pslot, cmd, pstatus);
514
515 if ((pslot == NULL)
516 || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
517 rc = -EINVAL;
518 err("%s - Error invalid pointer, rc[%d]\n", __func__, rc);
519 return rc;
520 }
521
522 if (cmd == READ_BUSSTATUS) {
523 busindex = ibmphp_get_bus_index(pslot->bus);
524 if (busindex < 0) {
525 rc = -EINVAL;
526 err("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
527 return rc;
528 } else
529 index = (u8) busindex;
530 } else
531 index = pslot->ctlr_index;
532
533 index = hpc_readcmdtoindex(cmd, index);
534
535 if (index == HPC_ERROR) {
536 rc = -EINVAL;
537 err("%s - Exit Error:invalid index, rc[%d]\n", __func__, rc);
538 return rc;
539 }
540
541 ctlr_ptr = pslot->ctrl;
542
543 get_hpc_access();
544
545 //--------------------------------------------------------------------
546 // map physical address to logical address
547 //--------------------------------------------------------------------
548 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
549 wpg_bbar = ioremap(ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
550
551 //--------------------------------------------------------------------
552 // check controller status before reading
553 //--------------------------------------------------------------------
554 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
555 if (!rc) {
556 switch (cmd) {
557 case READ_ALLSTAT:
558 // update the slot structure
559 pslot->ctrl->status = status;
560 pslot->status = ctrl_read(ctlr_ptr, wpg_bbar, index);
561 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
562 &status);
563 if (!rc)
564 pslot->ext_status = ctrl_read(ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
565
566 break;
567
568 case READ_SLOTSTATUS:
569 // DO NOT update the slot structure
570 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
571 break;
572
573 case READ_EXTSLOTSTATUS:
574 // DO NOT update the slot structure
575 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
576 break;
577
578 case READ_CTLRSTATUS:
579 // DO NOT update the slot structure
580 *pstatus = status;
581 break;
582
583 case READ_BUSSTATUS:
584 pslot->busstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
585 break;
586 case READ_REVLEVEL:
587 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
588 break;
589 case READ_HPCOPTIONS:
590 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
591 break;
592 case READ_SLOTLATCHLOWREG:
593 // DO NOT update the slot structure
594 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
595 break;
596
597 // Not used
598 case READ_ALLSLOT:
599 list_for_each_entry(pslot, &ibmphp_slot_head,
600 ibm_slot_list) {
601 index = pslot->ctlr_index;
602 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr,
603 wpg_bbar, &status);
604 if (!rc) {
605 pslot->status = ctrl_read(ctlr_ptr, wpg_bbar, index);
606 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT,
607 ctlr_ptr, wpg_bbar, &status);
608 if (!rc)
609 pslot->ext_status =
610 ctrl_read(ctlr_ptr, wpg_bbar,
611 index + WPG_1ST_EXTSLOT_INDEX);
612 } else {
613 err("%s - Error ctrl_read failed\n", __func__);
614 rc = -EINVAL;
615 break;
616 }
617 }
618 break;
619 default:
620 rc = -EINVAL;
621 break;
622 }
623 }
624 //--------------------------------------------------------------------
625 // cleanup
626 //--------------------------------------------------------------------
627
628 // remove physical to logical address mapping
629 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
630 iounmap(wpg_bbar);
631
632 free_hpc_access();
633
634 debug_polling("%s - Exit rc[%d]\n", __func__, rc);
635 return rc;
636 }
637
638 /*----------------------------------------------------------------------
639 * Name: ibmphp_hpc_writeslot()
640 *
641 * Action: issue a WRITE command to HPC
642 *---------------------------------------------------------------------*/
643 int ibmphp_hpc_writeslot(struct slot *pslot, u8 cmd)
644 {
645 void __iomem *wpg_bbar = NULL;
646 struct controller *ctlr_ptr;
647 u8 index, status;
648 int busindex;
649 u8 done;
650 int rc = 0;
651 int timeout;
652
653 debug_polling("%s - Entry pslot[%p] cmd[%x]\n", __func__, pslot, cmd);
654 if (pslot == NULL) {
655 rc = -EINVAL;
656 err("%s - Error Exit rc[%d]\n", __func__, rc);
657 return rc;
658 }
659
660 if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
661 (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
662 (cmd == HPC_BUS_133PCIXMODE)) {
663 busindex = ibmphp_get_bus_index(pslot->bus);
664 if (busindex < 0) {
665 rc = -EINVAL;
666 err("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
667 return rc;
668 } else
669 index = (u8) busindex;
670 } else
671 index = pslot->ctlr_index;
672
673 index = hpc_writecmdtoindex(cmd, index);
674
675 if (index == HPC_ERROR) {
676 rc = -EINVAL;
677 err("%s - Error Exit rc[%d]\n", __func__, rc);
678 return rc;
679 }
680
681 ctlr_ptr = pslot->ctrl;
682
683 get_hpc_access();
684
685 //--------------------------------------------------------------------
686 // map physical address to logical address
687 //--------------------------------------------------------------------
688 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
689 wpg_bbar = ioremap(ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
690
691 debug("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __func__,
692 ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
693 ctlr_ptr->u.wpeg_ctlr.i2c_addr);
694 }
695 //--------------------------------------------------------------------
696 // check controller status before writing
697 //--------------------------------------------------------------------
698 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
699 if (!rc) {
700
701 ctrl_write(ctlr_ptr, wpg_bbar, index, cmd);
702
703 //--------------------------------------------------------------------
704 // check controller is still not working on the command
705 //--------------------------------------------------------------------
706 timeout = CMD_COMPLETE_TOUT_SEC;
707 done = 0;
708 while (!done) {
709 rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
710 &status);
711 if (!rc) {
712 if (NEEDTOCHECK_CMDSTATUS(cmd)) {
713 if (CTLR_FINISHED(status) == HPC_CTLR_FINISHED_YES)
714 done = 1;
715 } else
716 done = 1;
717 }
718 if (!done) {
719 msleep(1000);
720 if (timeout < 1) {
721 done = 1;
722 err("%s - Error command complete timeout\n", __func__);
723 rc = -EFAULT;
724 } else
725 timeout--;
726 }
727 }
728 ctlr_ptr->status = status;
729 }
730 // cleanup
731
732 // remove physical to logical address mapping
733 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
734 iounmap(wpg_bbar);
735 free_hpc_access();
736
737 debug_polling("%s - Exit rc[%d]\n", __func__, rc);
738 return rc;
739 }
740
741 /*----------------------------------------------------------------------
742 * Name: get_hpc_access()
743 *
744 * Action: make sure only one process can access HPC at one time
745 *---------------------------------------------------------------------*/
746 static void get_hpc_access(void)
747 {
748 mutex_lock(&sem_hpcaccess);
749 }
750
751 /*----------------------------------------------------------------------
752 * Name: free_hpc_access()
753 *---------------------------------------------------------------------*/
754 void free_hpc_access(void)
755 {
756 mutex_unlock(&sem_hpcaccess);
757 }
758
759 /*----------------------------------------------------------------------
760 * Name: ibmphp_lock_operations()
761 *
762 * Action: make sure only one process can change the data structure
763 *---------------------------------------------------------------------*/
764 void ibmphp_lock_operations(void)
765 {
766 mutex_lock(&operations_mutex);
767 to_debug = 1;
768 }
769
770 /*----------------------------------------------------------------------
771 * Name: ibmphp_unlock_operations()
772 *---------------------------------------------------------------------*/
773 void ibmphp_unlock_operations(void)
774 {
775 debug("%s - Entry\n", __func__);
776 mutex_unlock(&operations_mutex);
777 to_debug = 0;
778 debug("%s - Exit\n", __func__);
779 }
780
781 /*----------------------------------------------------------------------
782 * Name: poll_hpc()
783 *---------------------------------------------------------------------*/
784 #define POLL_LATCH_REGISTER 0
785 #define POLL_SLOTS 1
786 #define POLL_SLEEP 2
787 static int poll_hpc(void *data)
788 {
789 struct slot myslot;
790 struct slot *pslot = NULL;
791 int rc;
792 int poll_state = POLL_LATCH_REGISTER;
793 u8 oldlatchlow = 0x00;
794 u8 curlatchlow = 0x00;
795 int poll_count = 0;
796 u8 ctrl_count = 0x00;
797
798 debug("%s - Entry\n", __func__);
799
800 while (!kthread_should_stop()) {
801 /* try to get the lock to do some kind of hardware access */
802 mutex_lock(&operations_mutex);
803
804 switch (poll_state) {
805 case POLL_LATCH_REGISTER:
806 oldlatchlow = curlatchlow;
807 ctrl_count = 0x00;
808 list_for_each_entry(pslot, &ibmphp_slot_head,
809 ibm_slot_list) {
810 if (ctrl_count >= ibmphp_get_total_controllers())
811 break;
812 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
813 ctrl_count++;
814 if (READ_SLOT_LATCH(pslot->ctrl)) {
815 rc = ibmphp_hpc_readslot(pslot,
816 READ_SLOTLATCHLOWREG,
817 &curlatchlow);
818 if (oldlatchlow != curlatchlow)
819 process_changeinlatch(oldlatchlow,
820 curlatchlow,
821 pslot->ctrl);
822 }
823 }
824 }
825 ++poll_count;
826 poll_state = POLL_SLEEP;
827 break;
828 case POLL_SLOTS:
829 list_for_each_entry(pslot, &ibmphp_slot_head,
830 ibm_slot_list) {
831 // make a copy of the old status
832 memcpy((void *) &myslot, (void *) pslot,
833 sizeof(struct slot));
834 rc = ibmphp_hpc_readslot(pslot, READ_ALLSTAT, NULL);
835 if ((myslot.status != pslot->status)
836 || (myslot.ext_status != pslot->ext_status))
837 process_changeinstatus(pslot, &myslot);
838 }
839 ctrl_count = 0x00;
840 list_for_each_entry(pslot, &ibmphp_slot_head,
841 ibm_slot_list) {
842 if (ctrl_count >= ibmphp_get_total_controllers())
843 break;
844 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
845 ctrl_count++;
846 if (READ_SLOT_LATCH(pslot->ctrl))
847 rc = ibmphp_hpc_readslot(pslot,
848 READ_SLOTLATCHLOWREG,
849 &curlatchlow);
850 }
851 }
852 ++poll_count;
853 poll_state = POLL_SLEEP;
854 break;
855 case POLL_SLEEP:
856 /* don't sleep with a lock on the hardware */
857 mutex_unlock(&operations_mutex);
858 msleep(POLL_INTERVAL_SEC * 1000);
859
860 if (kthread_should_stop())
861 goto out_sleep;
862
863 mutex_lock(&operations_mutex);
864
865 if (poll_count >= POLL_LATCH_CNT) {
866 poll_count = 0;
867 poll_state = POLL_SLOTS;
868 } else
869 poll_state = POLL_LATCH_REGISTER;
870 break;
871 }
872 /* give up the hardware semaphore */
873 mutex_unlock(&operations_mutex);
874 /* sleep for a short time just for good measure */
875 out_sleep:
876 msleep(100);
877 }
878 complete(&exit_complete);
879 debug("%s - Exit\n", __func__);
880 return 0;
881 }
882
883
884 /*----------------------------------------------------------------------
885 * Name: process_changeinstatus
886 *
887 * Action: compare old and new slot status, process the change in status
888 *
889 * Input: pointer to slot struct, old slot struct
890 *
891 * Return 0 or error codes
892 * Value:
893 *
894 * Side
895 * Effects: None.
896 *
897 * Notes:
898 *---------------------------------------------------------------------*/
899 static int process_changeinstatus(struct slot *pslot, struct slot *poldslot)
900 {
901 u8 status;
902 int rc = 0;
903 u8 disable = 0;
904 u8 update = 0;
905
906 debug("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
907
908 // bit 0 - HPC_SLOT_POWER
909 if ((pslot->status & 0x01) != (poldslot->status & 0x01))
910 update = 1;
911
912 // bit 1 - HPC_SLOT_CONNECT
913 // ignore
914
915 // bit 2 - HPC_SLOT_ATTN
916 if ((pslot->status & 0x04) != (poldslot->status & 0x04))
917 update = 1;
918
919 // bit 3 - HPC_SLOT_PRSNT2
920 // bit 4 - HPC_SLOT_PRSNT1
921 if (((pslot->status & 0x08) != (poldslot->status & 0x08))
922 || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
923 update = 1;
924
925 // bit 5 - HPC_SLOT_PWRGD
926 if ((pslot->status & 0x20) != (poldslot->status & 0x20))
927 // OFF -> ON: ignore, ON -> OFF: disable slot
928 if ((poldslot->status & 0x20) && (SLOT_CONNECT(poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT(poldslot->status)))
929 disable = 1;
930
931 // bit 6 - HPC_SLOT_BUS_SPEED
932 // ignore
933
934 // bit 7 - HPC_SLOT_LATCH
935 if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
936 update = 1;
937 // OPEN -> CLOSE
938 if (pslot->status & 0x80) {
939 if (SLOT_PWRGD(pslot->status)) {
940 // power goes on and off after closing latch
941 // check again to make sure power is still ON
942 msleep(1000);
943 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, &status);
944 if (SLOT_PWRGD(status))
945 update = 1;
946 else // overwrite power in pslot to OFF
947 pslot->status &= ~HPC_SLOT_POWER;
948 }
949 }
950 // CLOSE -> OPEN
951 else if ((SLOT_PWRGD(poldslot->status) == HPC_SLOT_PWRGD_GOOD)
952 && (SLOT_CONNECT(poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT(poldslot->status))) {
953 disable = 1;
954 }
955 // else - ignore
956 }
957 // bit 4 - HPC_SLOT_BLINK_ATTN
958 if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
959 update = 1;
960
961 if (disable) {
962 debug("process_changeinstatus - disable slot\n");
963 pslot->flag = 0;
964 rc = ibmphp_do_disable_slot(pslot);
965 }
966
967 if (update || disable)
968 ibmphp_update_slot_info(pslot);
969
970 debug("%s - Exit rc[%d] disable[%x] update[%x]\n", __func__, rc, disable, update);
971
972 return rc;
973 }
974
975 /*----------------------------------------------------------------------
976 * Name: process_changeinlatch
977 *
978 * Action: compare old and new latch reg status, process the change
979 *
980 * Input: old and current latch register status
981 *
982 * Return 0 or error codes
983 * Value:
984 *---------------------------------------------------------------------*/
985 static int process_changeinlatch(u8 old, u8 new, struct controller *ctrl)
986 {
987 struct slot myslot, *pslot;
988 u8 i;
989 u8 mask;
990 int rc = 0;
991
992 debug("%s - Entry old[%x], new[%x]\n", __func__, old, new);
993 // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
994
995 for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
996 mask = 0x01 << i;
997 if ((mask & old) != (mask & new)) {
998 pslot = ibmphp_get_slot_from_physical_num(i);
999 if (pslot) {
1000 memcpy((void *) &myslot, (void *) pslot, sizeof(struct slot));
1001 rc = ibmphp_hpc_readslot(pslot, READ_ALLSTAT, NULL);
1002 debug("%s - call process_changeinstatus for slot[%d]\n", __func__, i);
1003 process_changeinstatus(pslot, &myslot);
1004 } else {
1005 rc = -EINVAL;
1006 err("%s - Error bad pointer for slot[%d]\n", __func__, i);
1007 }
1008 }
1009 }
1010 debug("%s - Exit rc[%d]\n", __func__, rc);
1011 return rc;
1012 }
1013
1014 /*----------------------------------------------------------------------
1015 * Name: ibmphp_hpc_start_poll_thread
1016 *
1017 * Action: start polling thread
1018 *---------------------------------------------------------------------*/
1019 int __init ibmphp_hpc_start_poll_thread(void)
1020 {
1021 debug("%s - Entry\n", __func__);
1022
1023 ibmphp_poll_thread = kthread_run(poll_hpc, NULL, "hpc_poll");
1024 if (IS_ERR(ibmphp_poll_thread)) {
1025 err("%s - Error, thread not started\n", __func__);
1026 return PTR_ERR(ibmphp_poll_thread);
1027 }
1028 return 0;
1029 }
1030
1031 /*----------------------------------------------------------------------
1032 * Name: ibmphp_hpc_stop_poll_thread
1033 *
1034 * Action: stop polling thread and cleanup
1035 *---------------------------------------------------------------------*/
1036 void __exit ibmphp_hpc_stop_poll_thread(void)
1037 {
1038 debug("%s - Entry\n", __func__);
1039
1040 kthread_stop(ibmphp_poll_thread);
1041 debug("before locking operations\n");
1042 ibmphp_lock_operations();
1043 debug("after locking operations\n");
1044
1045 // wait for poll thread to exit
1046 debug("before exit_complete down\n");
1047 wait_for_completion(&exit_complete);
1048 debug("after exit_completion down\n");
1049
1050 // cleanup
1051 debug("before free_hpc_access\n");
1052 free_hpc_access();
1053 debug("after free_hpc_access\n");
1054 ibmphp_unlock_operations();
1055 debug("after unlock operations\n");
1056
1057 debug("%s - Exit\n", __func__);
1058 }
1059
1060 /*----------------------------------------------------------------------
1061 * Name: hpc_wait_ctlr_notworking
1062 *
1063 * Action: wait until the controller is in a not working state
1064 *
1065 * Return 0, HPC_ERROR
1066 * Value:
1067 *---------------------------------------------------------------------*/
1068 static int hpc_wait_ctlr_notworking(int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
1069 u8 *pstatus)
1070 {
1071 int rc = 0;
1072 u8 done = 0;
1073
1074 debug_polling("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
1075
1076 while (!done) {
1077 *pstatus = ctrl_read(ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
1078 if (*pstatus == HPC_ERROR) {
1079 rc = HPC_ERROR;
1080 done = 1;
1081 }
1082 if (CTLR_WORKING(*pstatus) == HPC_CTLR_WORKING_NO)
1083 done = 1;
1084 if (!done) {
1085 msleep(1000);
1086 if (timeout < 1) {
1087 done = 1;
1088 err("HPCreadslot - Error ctlr timeout\n");
1089 rc = HPC_ERROR;
1090 } else
1091 timeout--;
1092 }
1093 }
1094 debug_polling("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
1095 return rc;
1096 }
Linux with added FPC-III support