drivers/platform/x86/compal-laptop.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*-*-linux-c-*-*/
   3
   4 /*
   5   Copyright (C) 2008 Cezary Jackiewicz <cezary.jackiewicz (at) gmail.com>
   6
   7   based on MSI driver
   8
   9   Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
  10
  11  */
  12
  13 /*
  14  * compal-laptop.c - Compal laptop support.
  15  *
  16  * This driver exports a few files in /sys/devices/platform/compal-laptop/:
  17  *   wake_up_XXX   Whether or not we listen to such wake up events (rw)
  18  *
  19  * In addition to these platform device attributes the driver
  20  * registers itself in the Linux backlight control, power_supply, rfkill
  21  * and hwmon subsystem and is available to userspace under:
  22  *
  23  *   /sys/class/backlight/compal-laptop/
  24  *   /sys/class/power_supply/compal-laptop/
  25  *   /sys/class/rfkill/rfkillX/
  26  *   /sys/class/hwmon/hwmonX/
  27  *
  28  * Notes on the power_supply battery interface:
  29  *   - the "minimum" design voltage is *the* design voltage
  30  *   - the ambient temperature is the average battery temperature
  31  *     and the value is an educated guess (see commented code below)
  32  *
  33  *
  34  * This driver might work on other laptops produced by Compal. If you
  35  * want to try it you can pass force=1 as argument to the module which
  36  * will force it to load even when the DMI data doesn't identify the
  37  * laptop as compatible.
  38  *
  39  * Lots of data available at:
  40  * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
  41  * JHL90%20service%20manual-Final-0725.pdf
  42  *
  43  *
  44  *
  45  * Support for the Compal JHL90 added by Roald Frederickx
  46  * (roald.frederickx@gmail.com):
  47  * Driver got large revision. Added functionalities: backlight
  48  * power, wake_on_XXX, a hwmon and power_supply interface.
  49  *
  50  * In case this gets merged into the kernel source: I want to dedicate this
  51  * to Kasper Meerts, the awesome guy who showed me Linux and C!
  52  */
  53
  54 /* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
  55  * only enabled on a JHL90 board until it is verified that they work on the
  56  * other boards too.  See the extra_features variable. */
  57
  58 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  59
  60 #include <linux/module.h>
  61 #include <linux/kernel.h>
  62 #include <linux/init.h>
  63 #include <linux/acpi.h>
  64 #include <linux/dmi.h>
  65 #include <linux/backlight.h>
  66 #include <linux/platform_device.h>
  67 #include <linux/rfkill.h>
  68 #include <linux/hwmon.h>
  69 #include <linux/hwmon-sysfs.h>
  70 #include <linux/power_supply.h>
  71 #include <linux/fb.h>
  72 #include <acpi/video.h>
  73
  74 /* ======= */
  75 /* Defines */
  76 /* ======= */
  77 #define DRIVER_NAME "compal-laptop"
  78 #define DRIVER_VERSION  "0.2.7"
  79
  80 #define BACKLIGHT_LEVEL_ADDR            0xB9
  81 #define BACKLIGHT_LEVEL_MAX             7
  82 #define BACKLIGHT_STATE_ADDR            0x59
  83 #define BACKLIGHT_STATE_ON_DATA         0xE1
  84 #define BACKLIGHT_STATE_OFF_DATA        0xE2
  85
  86 #define WAKE_UP_ADDR                    0xA4
  87 #define WAKE_UP_PME                     (1 << 0)
  88 #define WAKE_UP_MODEM                   (1 << 1)
  89 #define WAKE_UP_LAN                     (1 << 2)
  90 #define WAKE_UP_WLAN                    (1 << 4)
  91 #define WAKE_UP_KEY                     (1 << 6)
  92 #define WAKE_UP_MOUSE                   (1 << 7)
  93
  94 #define WIRELESS_ADDR                   0xBB
  95 #define WIRELESS_WLAN                   (1 << 0)
  96 #define WIRELESS_BT                     (1 << 1)
  97 #define WIRELESS_WLAN_EXISTS            (1 << 2)
  98 #define WIRELESS_BT_EXISTS              (1 << 3)
  99 #define WIRELESS_KILLSWITCH             (1 << 4)
 100
 101 #define PWM_ADDRESS                     0x46
 102 #define PWM_DISABLE_ADDR                0x59
 103 #define PWM_DISABLE_DATA                0xA5
 104 #define PWM_ENABLE_ADDR                 0x59
 105 #define PWM_ENABLE_DATA                 0xA8
 106
 107 #define FAN_ADDRESS                     0x46
 108 #define FAN_DATA                        0x81
 109 #define FAN_FULL_ON_CMD                 0x59 /* Doesn't seem to work. Just */
 110 #define FAN_FULL_ON_ENABLE              0x76 /* force the pwm signal to its */
 111 #define FAN_FULL_ON_DISABLE             0x77 /* maximum value instead */
 112
 113 #define TEMP_CPU                        0xB0
 114 #define TEMP_CPU_LOCAL                  0xB1
 115 #define TEMP_CPU_DTS                    0xB5
 116 #define TEMP_NORTHBRIDGE                0xB6
 117 #define TEMP_VGA                        0xB4
 118 #define TEMP_SKIN                       0xB2
 119
 120 #define BAT_MANUFACTURER_NAME_ADDR      0x10
 121 #define BAT_MANUFACTURER_NAME_LEN       9
 122 #define BAT_MODEL_NAME_ADDR             0x19
 123 #define BAT_MODEL_NAME_LEN              6
 124 #define BAT_SERIAL_NUMBER_ADDR          0xC4
 125 #define BAT_SERIAL_NUMBER_LEN           5
 126 #define BAT_CHARGE_NOW                  0xC2
 127 #define BAT_CHARGE_DESIGN               0xCA
 128 #define BAT_VOLTAGE_NOW                 0xC6
 129 #define BAT_VOLTAGE_DESIGN              0xC8
 130 #define BAT_CURRENT_NOW                 0xD0
 131 #define BAT_CURRENT_AVG                 0xD2
 132 #define BAT_POWER                       0xD4
 133 #define BAT_CAPACITY                    0xCE
 134 #define BAT_TEMP                        0xD6
 135 #define BAT_TEMP_AVG                    0xD7
 136 #define BAT_STATUS0                     0xC1
 137 #define BAT_STATUS1                     0xF0
 138 #define BAT_STATUS2                     0xF1
 139 #define BAT_STOP_CHARGE1                0xF2
 140 #define BAT_STOP_CHARGE2                0xF3
 141 #define BAT_CHARGE_LIMIT                0x03
 142 #define BAT_CHARGE_LIMIT_MAX            100
 143
 144 #define BAT_S0_DISCHARGE                (1 << 0)
 145 #define BAT_S0_DISCHRG_CRITICAL         (1 << 2)
 146 #define BAT_S0_LOW                      (1 << 3)
 147 #define BAT_S0_CHARGING                 (1 << 1)
 148 #define BAT_S0_AC                       (1 << 7)
 149 #define BAT_S1_EXISTS                   (1 << 0)
 150 #define BAT_S1_FULL                     (1 << 1)
 151 #define BAT_S1_EMPTY                    (1 << 2)
 152 #define BAT_S1_LiION_OR_NiMH            (1 << 7)
 153 #define BAT_S2_LOW_LOW                  (1 << 0)
 154 #define BAT_STOP_CHRG1_BAD_CELL         (1 << 1)
 155 #define BAT_STOP_CHRG1_COMM_FAIL        (1 << 2)
 156 #define BAT_STOP_CHRG1_OVERVOLTAGE      (1 << 6)
 157 #define BAT_STOP_CHRG1_OVERTEMPERATURE  (1 << 7)
 158
 159
 160 /* ======= */
 161 /* Structs */
 162 /* ======= */
 163 struct compal_data{
 164         /* Fan control */
 165         int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by motherboard */
 166         unsigned char curr_pwm;
 167
 168         /* Power supply */
 169         struct power_supply *psy;
 170         struct power_supply_info psy_info;
 171         char bat_model_name[BAT_MODEL_NAME_LEN + 1];
 172         char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
 173         char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
 174 };
 175
 176
 177 /* =============== */
 178 /* General globals */
 179 /* =============== */
 180 static bool force;
 181 module_param(force, bool, 0);
 182 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 183
 184 /* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
 185  * only gets enabled on a JHL90 board. Might work with the others too */
 186 static bool extra_features;
 187
 188 /* Nasty stuff. For some reason the fan control is very un-linear.  I've
 189  * come up with these values by looping through the possible inputs and
 190  * watching the output of address 0x4F (do an ec_transaction writing 0x33
 191  * into 0x4F and read a few bytes from the output, like so:
 192  *      u8 writeData = 0x33;
 193  *      ec_transaction(0x4F, &writeData, 1, buffer, 32);
 194  * That address is labeled "fan1 table information" in the service manual.
 195  * It should be clear which value in 'buffer' changes). This seems to be
 196  * related to fan speed. It isn't a proper 'realtime' fan speed value
 197  * though, because physically stopping or speeding up the fan doesn't
 198  * change it. It might be the average voltage or current of the pwm output.
 199  * Nevertheless, it is more fine-grained than the actual RPM reading */
 200 static const unsigned char pwm_lookup_table[256] = {
 201         0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
 202         7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
 203         13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
 204         75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
 205         94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
 206         139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
 207         76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
 208         22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
 209         219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
 210         186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
 211         33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
 212         206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
 213         47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
 214         48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
 215         189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
 216         191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
 217         187, 187, 193, 50
 218 };
 219
 220
 221
 222
 223 /* ========================= */
 224 /* Hardware access functions */
 225 /* ========================= */
 226 /* General access */
 227 static u8 ec_read_u8(u8 addr)
 228 {
 229         u8 value = 0;
 230         ec_read(addr, &value);
 231         return value;
 232 }
 233
 234 static s8 ec_read_s8(u8 addr)
 235 {
 236         return (s8)ec_read_u8(addr);
 237 }
 238
 239 static u16 ec_read_u16(u8 addr)
 240 {
 241         int hi, lo;
 242         lo = ec_read_u8(addr);
 243         hi = ec_read_u8(addr + 1);
 244         return (hi << 8) + lo;
 245 }
 246
 247 static s16 ec_read_s16(u8 addr)
 248 {
 249         return (s16) ec_read_u16(addr);
 250 }
 251
 252 static void ec_read_sequence(u8 addr, u8 *buf, int len)
 253 {
 254         int i;
 255         for (i = 0; i < len; i++)
 256                 ec_read(addr + i, buf + i);
 257 }
 258
 259
 260 /* Backlight access */
 261 static int set_backlight_level(int level)
 262 {
 263         if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
 264                 return -EINVAL;
 265
 266         ec_write(BACKLIGHT_LEVEL_ADDR, level);
 267
 268         return 0;
 269 }
 270
 271 static int get_backlight_level(void)
 272 {
 273         return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
 274 }
 275
 276 static void set_backlight_state(bool on)
 277 {
 278         u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
 279         ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0);
 280 }
 281
 282
 283 /* Fan control access */
 284 static void pwm_enable_control(void)
 285 {
 286         unsigned char writeData = PWM_ENABLE_DATA;
 287         ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0);
 288 }
 289
 290 static void pwm_disable_control(void)
 291 {
 292         unsigned char writeData = PWM_DISABLE_DATA;
 293         ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0);
 294 }
 295
 296 static void set_pwm(int pwm)
 297 {
 298         ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0);
 299 }
 300
 301 static int get_fan_rpm(void)
 302 {
 303         u8 value, data = FAN_DATA;
 304         ec_transaction(FAN_ADDRESS, &data, 1, &value, 1);
 305         return 100 * (int)value;
 306 }
 307
 308
 309
 310
 311 /* =================== */
 312 /* Interface functions */
 313 /* =================== */
 314
 315 /* Backlight interface */
 316 static int bl_get_brightness(struct backlight_device *b)
 317 {
 318         return get_backlight_level();
 319 }
 320
 321 static int bl_update_status(struct backlight_device *b)
 322 {
 323         int ret = set_backlight_level(b->props.brightness);
 324         if (ret)
 325                 return ret;
 326
 327         set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
 328                 &&    !(b->props.state & BL_CORE_SUSPENDED)
 329                 &&    !(b->props.state & BL_CORE_FBBLANK));
 330         return 0;
 331 }
 332
 333 static const struct backlight_ops compalbl_ops = {
 334         .get_brightness = bl_get_brightness,
 335         .update_status  = bl_update_status,
 336 };
 337
 338
 339 /* Wireless interface */
 340 static int compal_rfkill_set(void *data, bool blocked)
 341 {
 342         unsigned long radio = (unsigned long) data;
 343         u8 result = ec_read_u8(WIRELESS_ADDR);
 344         u8 value;
 345
 346         if (!blocked)
 347                 value = (u8) (result | radio);
 348         else
 349                 value = (u8) (result & ~radio);
 350         ec_write(WIRELESS_ADDR, value);
 351
 352         return 0;
 353 }
 354
 355 static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
 356 {
 357         u8 result = ec_read_u8(WIRELESS_ADDR);
 358         bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
 359         rfkill_set_hw_state(rfkill, hw_blocked);
 360 }
 361
 362 static const struct rfkill_ops compal_rfkill_ops = {
 363         .poll = compal_rfkill_poll,
 364         .set_block = compal_rfkill_set,
 365 };
 366
 367
 368 /* Wake_up interface */
 369 #define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK)                      \
 370 static ssize_t NAME##_show(struct device *dev,                          \
 371         struct device_attribute *attr, char *buf)                       \
 372 {                                                                       \
 373         return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0));  \
 374 }                                                                       \
 375 static ssize_t NAME##_store(struct device *dev,                         \
 376         struct device_attribute *attr, const char *buf, size_t count)   \
 377 {                                                                       \
 378         int state;                                                      \
 379         u8 old_val = ec_read_u8(ADDR);                                  \
 380         if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1)) \
 381                 return -EINVAL;                                         \
 382         ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK));   \
 383         return count;                                                   \
 384 }
 385
 386 SIMPLE_MASKED_STORE_SHOW(wake_up_pme,   WAKE_UP_ADDR, WAKE_UP_PME)
 387 SIMPLE_MASKED_STORE_SHOW(wake_up_modem, WAKE_UP_ADDR, WAKE_UP_MODEM)
 388 SIMPLE_MASKED_STORE_SHOW(wake_up_lan,   WAKE_UP_ADDR, WAKE_UP_LAN)
 389 SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,  WAKE_UP_ADDR, WAKE_UP_WLAN)
 390 SIMPLE_MASKED_STORE_SHOW(wake_up_key,   WAKE_UP_ADDR, WAKE_UP_KEY)
 391 SIMPLE_MASKED_STORE_SHOW(wake_up_mouse, WAKE_UP_ADDR, WAKE_UP_MOUSE)
 392
 393 /* Fan control interface */
 394 static ssize_t pwm_enable_show(struct device *dev,
 395                 struct device_attribute *attr, char *buf)
 396 {
 397         struct compal_data *data = dev_get_drvdata(dev);
 398         return sprintf(buf, "%d\n", data->pwm_enable);
 399 }
 400
 401 static ssize_t pwm_enable_store(struct device *dev,
 402                 struct device_attribute *attr, const char *buf, size_t count)
 403 {
 404         struct compal_data *data = dev_get_drvdata(dev);
 405         long val;
 406         int err;
 407
 408         err = kstrtol(buf, 10, &val);
 409         if (err)
 410                 return err;
 411         if (val < 0)
 412                 return -EINVAL;
 413
 414         data->pwm_enable = val;
 415
 416         switch (val) {
 417         case 0:  /* Full speed */
 418                 pwm_enable_control();
 419                 set_pwm(255);
 420                 break;
 421         case 1:  /* As set by pwm1 */
 422                 pwm_enable_control();
 423                 set_pwm(data->curr_pwm);
 424                 break;
 425         default: /* Control by motherboard */
 426                 pwm_disable_control();
 427                 break;
 428         }
 429
 430         return count;
 431 }
 432
 433 static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
 434                 char *buf)
 435 {
 436         struct compal_data *data = dev_get_drvdata(dev);
 437         return sprintf(buf, "%hhu\n", data->curr_pwm);
 438 }
 439
 440 static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
 441                 const char *buf, size_t count)
 442 {
 443         struct compal_data *data = dev_get_drvdata(dev);
 444         long val;
 445         int err;
 446
 447         err = kstrtol(buf, 10, &val);
 448         if (err)
 449                 return err;
 450         if (val < 0 || val > 255)
 451                 return -EINVAL;
 452
 453         data->curr_pwm = val;
 454
 455         if (data->pwm_enable != 1)
 456                 return count;
 457         set_pwm(val);
 458
 459         return count;
 460 }
 461
 462 static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
 463                 char *buf)
 464 {
 465         return sprintf(buf, "%d\n", get_fan_rpm());
 466 }
 467
 468
 469 /* Temperature interface */
 470 #define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL)        \
 471 static ssize_t temp_##POSTFIX(struct device *dev,                       \
 472                 struct device_attribute *attr, char *buf)               \
 473 {                                                                       \
 474         return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS));   \
 475 }                                                                       \
 476 static ssize_t label_##POSTFIX(struct device *dev,                      \
 477                 struct device_attribute *attr, char *buf)               \
 478 {                                                                       \
 479         return sprintf(buf, "%s\n", LABEL);                             \
 480 }
 481
 482 /* Labels as in service guide */
 483 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu,        TEMP_CPU,        "CPU_TEMP");
 484 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local,  TEMP_CPU_LOCAL,  "CPU_TEMP_LOCAL");
 485 TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS,    TEMP_CPU_DTS,    "CPU_DTS");
 486 TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
 487 TEMPERATURE_SHOW_TEMP_AND_LABEL(vga,        TEMP_VGA,        "VGA_TEMP");
 488 TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN,       TEMP_SKIN,       "SKIN_TEMP90");
 489
 490
 491 /* Power supply interface */
 492 static int bat_status(void)
 493 {
 494         u8 status0 = ec_read_u8(BAT_STATUS0);
 495         u8 status1 = ec_read_u8(BAT_STATUS1);
 496
 497         if (status0 & BAT_S0_CHARGING)
 498                 return POWER_SUPPLY_STATUS_CHARGING;
 499         if (status0 & BAT_S0_DISCHARGE)
 500                 return POWER_SUPPLY_STATUS_DISCHARGING;
 501         if (status1 & BAT_S1_FULL)
 502                 return POWER_SUPPLY_STATUS_FULL;
 503         return POWER_SUPPLY_STATUS_NOT_CHARGING;
 504 }
 505
 506 static int bat_health(void)
 507 {
 508         u8 status = ec_read_u8(BAT_STOP_CHARGE1);
 509
 510         if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
 511                 return POWER_SUPPLY_HEALTH_OVERHEAT;
 512         if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
 513                 return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 514         if (status & BAT_STOP_CHRG1_BAD_CELL)
 515                 return POWER_SUPPLY_HEALTH_DEAD;
 516         if (status & BAT_STOP_CHRG1_COMM_FAIL)
 517                 return POWER_SUPPLY_HEALTH_UNKNOWN;
 518         return POWER_SUPPLY_HEALTH_GOOD;
 519 }
 520
 521 static int bat_is_present(void)
 522 {
 523         u8 status = ec_read_u8(BAT_STATUS2);
 524         return ((status & BAT_S1_EXISTS) != 0);
 525 }
 526
 527 static int bat_technology(void)
 528 {
 529         u8 status = ec_read_u8(BAT_STATUS1);
 530
 531         if (status & BAT_S1_LiION_OR_NiMH)
 532                 return POWER_SUPPLY_TECHNOLOGY_LION;
 533         return POWER_SUPPLY_TECHNOLOGY_NiMH;
 534 }
 535
 536 static int bat_capacity_level(void)
 537 {
 538         u8 status0 = ec_read_u8(BAT_STATUS0);
 539         u8 status1 = ec_read_u8(BAT_STATUS1);
 540         u8 status2 = ec_read_u8(BAT_STATUS2);
 541
 542         if (status0 & BAT_S0_DISCHRG_CRITICAL
 543                         || status1 & BAT_S1_EMPTY
 544                         || status2 & BAT_S2_LOW_LOW)
 545                 return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
 546         if (status0 & BAT_S0_LOW)
 547                 return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 548         if (status1 & BAT_S1_FULL)
 549                 return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 550         return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 551 }
 552
 553 static int bat_get_property(struct power_supply *psy,
 554                                 enum power_supply_property psp,
 555                                 union power_supply_propval *val)
 556 {
 557         struct compal_data *data = power_supply_get_drvdata(psy);
 558
 559         switch (psp) {
 560         case POWER_SUPPLY_PROP_STATUS:
 561                 val->intval = bat_status();
 562                 break;
 563         case POWER_SUPPLY_PROP_HEALTH:
 564                 val->intval = bat_health();
 565                 break;
 566         case POWER_SUPPLY_PROP_PRESENT:
 567                 val->intval = bat_is_present();
 568                 break;
 569         case POWER_SUPPLY_PROP_TECHNOLOGY:
 570                 val->intval = bat_technology();
 571                 break;
 572         case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
 573                 val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
 574                 break;
 575         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 576                 val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
 577                 break;
 578         case POWER_SUPPLY_PROP_CURRENT_NOW:
 579                 val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
 580                 break;
 581         case POWER_SUPPLY_PROP_CURRENT_AVG:
 582                 val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
 583                 break;
 584         case POWER_SUPPLY_PROP_POWER_NOW:
 585                 val->intval = ec_read_u8(BAT_POWER) * 1000000;
 586                 break;
 587         case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 588                 val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
 589                 break;
 590         case POWER_SUPPLY_PROP_CHARGE_NOW:
 591                 val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
 592                 break;
 593         case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 594                 val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
 595                 break;
 596         case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
 597                 val->intval = BAT_CHARGE_LIMIT_MAX;
 598                 break;
 599         case POWER_SUPPLY_PROP_CAPACITY:
 600                 val->intval = ec_read_u8(BAT_CAPACITY);
 601                 break;
 602         case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
 603                 val->intval = bat_capacity_level();
 604                 break;
 605         /* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
 606          * the number of degrees, whereas BAT_TEMP is somewhat more
 607          * complicated. It looks like this is a negative nember with a
 608          * 100/256 divider and an offset of 222. Both were determined
 609          * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
 610         case POWER_SUPPLY_PROP_TEMP:
 611                 val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
 612                 break;
 613         case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
 614                 val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
 615                 break;
 616         /* Neither the model name nor manufacturer name work for me. */
 617         case POWER_SUPPLY_PROP_MODEL_NAME:
 618                 val->strval = data->bat_model_name;
 619                 break;
 620         case POWER_SUPPLY_PROP_MANUFACTURER:
 621                 val->strval = data->bat_manufacturer_name;
 622                 break;
 623         case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 624                 val->strval = data->bat_serial_number;
 625                 break;
 626         default:
 627                 break;
 628         }
 629         return 0;
 630 }
 631
 632 static int bat_set_property(struct power_supply *psy,
 633                                 enum power_supply_property psp,
 634                                 const union power_supply_propval *val)
 635 {
 636         int level;
 637
 638         switch (psp) {
 639         case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 640                 level = val->intval;
 641                 if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
 642                         return -EINVAL;
 643                 if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
 644                         return -EIO;
 645                 break;
 646         default:
 647                 break;
 648         }
 649         return 0;
 650 }
 651
 652 static int bat_writeable_property(struct power_supply *psy,
 653                                 enum power_supply_property psp)
 654 {
 655         switch (psp) {
 656         case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 657                 return 1;
 658         default:
 659                 return 0;
 660         }
 661 }
 662
 663
 664
 665
 666 /* ============== */
 667 /* Driver Globals */
 668 /* ============== */
 669 static DEVICE_ATTR_RW(wake_up_pme);
 670 static DEVICE_ATTR_RW(wake_up_modem);
 671 static DEVICE_ATTR_RW(wake_up_lan);
 672 static DEVICE_ATTR_RW(wake_up_wlan);
 673 static DEVICE_ATTR_RW(wake_up_key);
 674 static DEVICE_ATTR_RW(wake_up_mouse);
 675
 676 static DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL);
 677 static DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL);
 678 static DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL);
 679 static DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL);
 680 static DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL);
 681 static DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL);
 682 static DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL);
 683 static DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL);
 684 static DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL);
 685 static DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL);
 686 static DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL);
 687 static DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL);
 688 static DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL);
 689 static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store);
 690 static DEVICE_ATTR(pwm1_enable,
 691                    S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store);
 692
 693 static struct attribute *compal_platform_attrs[] = {
 694         &dev_attr_wake_up_pme.attr,
 695         &dev_attr_wake_up_modem.attr,
 696         &dev_attr_wake_up_lan.attr,
 697         &dev_attr_wake_up_wlan.attr,
 698         &dev_attr_wake_up_key.attr,
 699         &dev_attr_wake_up_mouse.attr,
 700         NULL
 701 };
 702 static const struct attribute_group compal_platform_attr_group = {
 703         .attrs = compal_platform_attrs
 704 };
 705
 706 static struct attribute *compal_hwmon_attrs[] = {
 707         &dev_attr_pwm1_enable.attr,
 708         &dev_attr_pwm1.attr,
 709         &dev_attr_fan1_input.attr,
 710         &dev_attr_temp1_input.attr,
 711         &dev_attr_temp2_input.attr,
 712         &dev_attr_temp3_input.attr,
 713         &dev_attr_temp4_input.attr,
 714         &dev_attr_temp5_input.attr,
 715         &dev_attr_temp6_input.attr,
 716         &dev_attr_temp1_label.attr,
 717         &dev_attr_temp2_label.attr,
 718         &dev_attr_temp3_label.attr,
 719         &dev_attr_temp4_label.attr,
 720         &dev_attr_temp5_label.attr,
 721         &dev_attr_temp6_label.attr,
 722         NULL
 723 };
 724 ATTRIBUTE_GROUPS(compal_hwmon);
 725
 726 static int compal_probe(struct platform_device *);
 727 static int compal_remove(struct platform_device *);
 728 static struct platform_driver compal_driver = {
 729         .driver = {
 730                 .name = DRIVER_NAME,
 731         },
 732         .probe  = compal_probe,
 733         .remove = compal_remove,
 734 };
 735
 736 static enum power_supply_property compal_bat_properties[] = {
 737         POWER_SUPPLY_PROP_STATUS,
 738         POWER_SUPPLY_PROP_HEALTH,
 739         POWER_SUPPLY_PROP_PRESENT,
 740         POWER_SUPPLY_PROP_TECHNOLOGY,
 741         POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 742         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 743         POWER_SUPPLY_PROP_CURRENT_NOW,
 744         POWER_SUPPLY_PROP_CURRENT_AVG,
 745         POWER_SUPPLY_PROP_POWER_NOW,
 746         POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 747         POWER_SUPPLY_PROP_CHARGE_NOW,
 748         POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
 749         POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
 750         POWER_SUPPLY_PROP_CAPACITY,
 751         POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 752         POWER_SUPPLY_PROP_TEMP,
 753         POWER_SUPPLY_PROP_TEMP_AMBIENT,
 754         POWER_SUPPLY_PROP_MODEL_NAME,
 755         POWER_SUPPLY_PROP_MANUFACTURER,
 756         POWER_SUPPLY_PROP_SERIAL_NUMBER,
 757 };
 758
 759 static struct backlight_device *compalbl_device;
 760
 761 static struct platform_device *compal_device;
 762
 763 static struct rfkill *wifi_rfkill;
 764 static struct rfkill *bt_rfkill;
 765
 766
 767
 768
 769
 770 /* =================================== */
 771 /* Initialization & clean-up functions */
 772 /* =================================== */
 773
 774 static int dmi_check_cb(const struct dmi_system_id *id)
 775 {
 776         pr_info("Identified laptop model '%s'\n", id->ident);
 777         extra_features = false;
 778         return 1;
 779 }
 780
 781 static int dmi_check_cb_extra(const struct dmi_system_id *id)
 782 {
 783         pr_info("Identified laptop model '%s', enabling extra features\n",
 784                 id->ident);
 785         extra_features = true;
 786         return 1;
 787 }
 788
 789 static const struct dmi_system_id compal_dmi_table[] __initconst = {
 790         {
 791                 .ident = "FL90/IFL90",
 792                 .matches = {
 793                         DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 794                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 795                 },
 796                 .callback = dmi_check_cb
 797         },
 798         {
 799                 .ident = "FL90/IFL90",
 800                 .matches = {
 801                         DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 802                         DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 803                 },
 804                 .callback = dmi_check_cb
 805         },
 806         {
 807                 .ident = "FL91/IFL91",
 808                 .matches = {
 809                         DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
 810                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 811                 },
 812                 .callback = dmi_check_cb
 813         },
 814         {
 815                 .ident = "FL92/JFL92",
 816                 .matches = {
 817                         DMI_MATCH(DMI_BOARD_NAME, "JFL92"),
 818                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 819                 },
 820                 .callback = dmi_check_cb
 821         },
 822         {
 823                 .ident = "FT00/IFT00",
 824                 .matches = {
 825                         DMI_MATCH(DMI_BOARD_NAME, "IFT00"),
 826                         DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 827                 },
 828                 .callback = dmi_check_cb
 829         },
 830         {
 831                 .ident = "Dell Mini 9",
 832                 .matches = {
 833                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 834                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"),
 835                 },
 836                 .callback = dmi_check_cb
 837         },
 838         {
 839                 .ident = "Dell Mini 10",
 840                 .matches = {
 841                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 842                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"),
 843                 },
 844                 .callback = dmi_check_cb
 845         },
 846         {
 847                 .ident = "Dell Mini 10v",
 848                 .matches = {
 849                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 850                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
 851                 },
 852                 .callback = dmi_check_cb
 853         },
 854         {
 855                 .ident = "Dell Mini 1012",
 856                 .matches = {
 857                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 858                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
 859                 },
 860                 .callback = dmi_check_cb
 861         },
 862         {
 863                 .ident = "Dell Inspiron 11z",
 864                 .matches = {
 865                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 866                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"),
 867                 },
 868                 .callback = dmi_check_cb
 869         },
 870         {
 871                 .ident = "Dell Mini 12",
 872                 .matches = {
 873                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 874                         DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"),
 875                 },
 876                 .callback = dmi_check_cb
 877         },
 878         {
 879                 .ident = "JHL90",
 880                 .matches = {
 881                         DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
 882                         DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 883                 },
 884                 .callback = dmi_check_cb_extra
 885         },
 886         {
 887                 .ident = "KHLB2",
 888                 .matches = {
 889                         DMI_MATCH(DMI_BOARD_NAME, "KHLB2"),
 890                         DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 891                 },
 892                 .callback = dmi_check_cb_extra
 893         },
 894         { }
 895 };
 896 MODULE_DEVICE_TABLE(dmi, compal_dmi_table);
 897
 898 static const struct power_supply_desc psy_bat_desc = {
 899         .name           = DRIVER_NAME,
 900         .type           = POWER_SUPPLY_TYPE_BATTERY,
 901         .properties     = compal_bat_properties,
 902         .num_properties = ARRAY_SIZE(compal_bat_properties),
 903         .get_property   = bat_get_property,
 904         .set_property   = bat_set_property,
 905         .property_is_writeable = bat_writeable_property,
 906 };
 907
 908 static void initialize_power_supply_data(struct compal_data *data)
 909 {
 910         ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
 911                                         data->bat_manufacturer_name,
 912                                         BAT_MANUFACTURER_NAME_LEN);
 913         data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;
 914
 915         ec_read_sequence(BAT_MODEL_NAME_ADDR,
 916                                         data->bat_model_name,
 917                                         BAT_MODEL_NAME_LEN);
 918         data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;
 919
 920         scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
 921                                 ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
 922 }
 923
 924 static void initialize_fan_control_data(struct compal_data *data)
 925 {
 926         data->pwm_enable = 2; /* Keep motherboard in control for now */
 927         data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
 928                                  if we take over... */
 929 }
 930
 931 static int setup_rfkill(void)
 932 {
 933         int ret;
 934
 935         wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
 936                                 RFKILL_TYPE_WLAN, &compal_rfkill_ops,
 937                                 (void *) WIRELESS_WLAN);
 938         if (!wifi_rfkill)
 939                 return -ENOMEM;
 940
 941         ret = rfkill_register(wifi_rfkill);
 942         if (ret)
 943                 goto err_wifi;
 944
 945         bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
 946                                 RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
 947                                 (void *) WIRELESS_BT);
 948         if (!bt_rfkill) {
 949                 ret = -ENOMEM;
 950                 goto err_allocate_bt;
 951         }
 952         ret = rfkill_register(bt_rfkill);
 953         if (ret)
 954                 goto err_register_bt;
 955
 956         return 0;
 957
 958 err_register_bt:
 959         rfkill_destroy(bt_rfkill);
 960
 961 err_allocate_bt:
 962         rfkill_unregister(wifi_rfkill);
 963
 964 err_wifi:
 965         rfkill_destroy(wifi_rfkill);
 966
 967         return ret;
 968 }
 969
 970 static int __init compal_init(void)
 971 {
 972         int ret;
 973
 974         if (acpi_disabled) {
 975                 pr_err("ACPI needs to be enabled for this driver to work!\n");
 976                 return -ENODEV;
 977         }
 978
 979         if (!force && !dmi_check_system(compal_dmi_table)) {
 980                 pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
 981                 return -ENODEV;
 982         }
 983
 984         if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 985                 struct backlight_properties props;
 986                 memset(&props, 0, sizeof(struct backlight_properties));
 987                 props.type = BACKLIGHT_PLATFORM;
 988                 props.max_brightness = BACKLIGHT_LEVEL_MAX;
 989                 compalbl_device = backlight_device_register(DRIVER_NAME,
 990                                                             NULL, NULL,
 991                                                             &compalbl_ops,
 992                                                             &props);
 993                 if (IS_ERR(compalbl_device))
 994                         return PTR_ERR(compalbl_device);
 995         }
 996
 997         ret = platform_driver_register(&compal_driver);
 998         if (ret)
 999                 goto err_backlight;
1000
1001         compal_device = platform_device_alloc(DRIVER_NAME, -1);
1002         if (!compal_device) {
1003                 ret = -ENOMEM;
1004                 goto err_platform_driver;
1005         }
1006
1007         ret = platform_device_add(compal_device); /* This calls compal_probe */
1008         if (ret)
1009                 goto err_platform_device;
1010
1011         ret = setup_rfkill();
1012         if (ret)
1013                 goto err_rfkill;
1014
1015         pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
1016         return 0;
1017
1018 err_rfkill:
1019         platform_device_del(compal_device);
1020
1021 err_platform_device:
1022         platform_device_put(compal_device);
1023
1024 err_platform_driver:
1025         platform_driver_unregister(&compal_driver);
1026
1027 err_backlight:
1028         backlight_device_unregister(compalbl_device);
1029
1030         return ret;
1031 }
1032
1033 static int compal_probe(struct platform_device *pdev)
1034 {
1035         int err;
1036         struct compal_data *data;
1037         struct device *hwmon_dev;
1038         struct power_supply_config psy_cfg = {};
1039
1040         if (!extra_features)
1041                 return 0;
1042
1043         /* Fan control */
1044         data = devm_kzalloc(&pdev->dev, sizeof(struct compal_data), GFP_KERNEL);
1045         if (!data)
1046                 return -ENOMEM;
1047
1048         initialize_fan_control_data(data);
1049
1050         err = sysfs_create_group(&pdev->dev.kobj, &compal_platform_attr_group);
1051         if (err)
1052                 return err;
1053
1054         hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
1055                                                            "compal", data,
1056                                                            compal_hwmon_groups);
1057         if (IS_ERR(hwmon_dev)) {
1058                 err = PTR_ERR(hwmon_dev);
1059                 goto remove;
1060         }
1061
1062         /* Power supply */
1063         initialize_power_supply_data(data);
1064         psy_cfg.drv_data = data;
1065         data->psy = power_supply_register(&compal_device->dev, &psy_bat_desc,
1066                                           &psy_cfg);
1067         if (IS_ERR(data->psy)) {
1068                 err = PTR_ERR(data->psy);
1069                 goto remove;
1070         }
1071
1072         platform_set_drvdata(pdev, data);
1073
1074         return 0;
1075
1076 remove:
1077         sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1078         return err;
1079 }
1080
1081 static void __exit compal_cleanup(void)
1082 {
1083         platform_device_unregister(compal_device);
1084         platform_driver_unregister(&compal_driver);
1085         backlight_device_unregister(compalbl_device);
1086         rfkill_unregister(wifi_rfkill);
1087         rfkill_unregister(bt_rfkill);
1088         rfkill_destroy(wifi_rfkill);
1089         rfkill_destroy(bt_rfkill);
1090
1091         pr_info("Driver unloaded\n");
1092 }
1093
1094 static int compal_remove(struct platform_device *pdev)
1095 {
1096         struct compal_data *data;
1097
1098         if (!extra_features)
1099                 return 0;
1100
1101         pr_info("Unloading: resetting fan control to motherboard\n");
1102         pwm_disable_control();
1103
1104         data = platform_get_drvdata(pdev);
1105         power_supply_unregister(data->psy);
1106
1107         sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1108
1109         return 0;
1110 }
1111
1112
1113 module_init(compal_init);
1114 module_exit(compal_cleanup);
1115
1116 MODULE_AUTHOR("Cezary Jackiewicz");
1117 MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
1118 MODULE_DESCRIPTION("Compal Laptop Support");
1119 MODULE_VERSION(DRIVER_VERSION);
1120 MODULE_LICENSE("GPL");