drivers/tty/serial/uartlite.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * uartlite.c: Serial driver for Xilinx uartlite serial controller
   4  *
   5  * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
   6  * Copyright (C) 2007 Secret Lab Technologies Ltd.
   7  */
   8
   9 #include <linux/platform_device.h>
  10 #include <linux/module.h>
  11 #include <linux/console.h>
  12 #include <linux/serial.h>
  13 #include <linux/serial_core.h>
  14 #include <linux/tty.h>
  15 #include <linux/tty_flip.h>
  16 #include <linux/delay.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/init.h>
  19 #include <linux/io.h>
  20 #include <linux/of.h>
  21 #include <linux/of_address.h>
  22 #include <linux/of_device.h>
  23 #include <linux/of_platform.h>
  24 #include <linux/clk.h>
  25
  26 #define ULITE_NAME              "ttyUL"
  27 #define ULITE_MAJOR             204
  28 #define ULITE_MINOR             187
  29 #define ULITE_NR_UARTS          CONFIG_SERIAL_UARTLITE_NR_UARTS
  30
  31 /* ---------------------------------------------------------------------
  32  * Register definitions
  33  *
  34  * For register details see datasheet:
  35  * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
  36  */
  37
  38 #define ULITE_RX                0x00
  39 #define ULITE_TX                0x04
  40 #define ULITE_STATUS            0x08
  41 #define ULITE_CONTROL           0x0c
  42
  43 #define ULITE_REGION            16
  44
  45 #define ULITE_STATUS_RXVALID    0x01
  46 #define ULITE_STATUS_RXFULL     0x02
  47 #define ULITE_STATUS_TXEMPTY    0x04
  48 #define ULITE_STATUS_TXFULL     0x08
  49 #define ULITE_STATUS_IE         0x10
  50 #define ULITE_STATUS_OVERRUN    0x20
  51 #define ULITE_STATUS_FRAME      0x40
  52 #define ULITE_STATUS_PARITY     0x80
  53
  54 #define ULITE_CONTROL_RST_TX    0x01
  55 #define ULITE_CONTROL_RST_RX    0x02
  56 #define ULITE_CONTROL_IE        0x10
  57
  58 /* Static pointer to console port */
  59 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
  60 static struct uart_port *console_port;
  61 #endif
  62
  63 struct uartlite_data {
  64         const struct uartlite_reg_ops *reg_ops;
  65         struct clk *clk;
  66 };
  67
  68 struct uartlite_reg_ops {
  69         u32 (*in)(void __iomem *addr);
  70         void (*out)(u32 val, void __iomem *addr);
  71 };
  72
  73 static u32 uartlite_inbe32(void __iomem *addr)
  74 {
  75         return ioread32be(addr);
  76 }
  77
  78 static void uartlite_outbe32(u32 val, void __iomem *addr)
  79 {
  80         iowrite32be(val, addr);
  81 }
  82
  83 static const struct uartlite_reg_ops uartlite_be = {
  84         .in = uartlite_inbe32,
  85         .out = uartlite_outbe32,
  86 };
  87
  88 static u32 uartlite_inle32(void __iomem *addr)
  89 {
  90         return ioread32(addr);
  91 }
  92
  93 static void uartlite_outle32(u32 val, void __iomem *addr)
  94 {
  95         iowrite32(val, addr);
  96 }
  97
  98 static const struct uartlite_reg_ops uartlite_le = {
  99         .in = uartlite_inle32,
 100         .out = uartlite_outle32,
 101 };
 102
 103 static inline u32 uart_in32(u32 offset, struct uart_port *port)
 104 {
 105         struct uartlite_data *pdata = port->private_data;
 106
 107         return pdata->reg_ops->in(port->membase + offset);
 108 }
 109
 110 static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
 111 {
 112         struct uartlite_data *pdata = port->private_data;
 113
 114         pdata->reg_ops->out(val, port->membase + offset);
 115 }
 116
 117 static struct uart_port ulite_ports[ULITE_NR_UARTS];
 118
 119 /* ---------------------------------------------------------------------
 120  * Core UART driver operations
 121  */
 122
 123 static int ulite_receive(struct uart_port *port, int stat)
 124 {
 125         struct tty_port *tport = &port->state->port;
 126         unsigned char ch = 0;
 127         char flag = TTY_NORMAL;
 128
 129         if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
 130                      | ULITE_STATUS_FRAME)) == 0)
 131                 return 0;
 132
 133         /* stats */
 134         if (stat & ULITE_STATUS_RXVALID) {
 135                 port->icount.rx++;
 136                 ch = uart_in32(ULITE_RX, port);
 137
 138                 if (stat & ULITE_STATUS_PARITY)
 139                         port->icount.parity++;
 140         }
 141
 142         if (stat & ULITE_STATUS_OVERRUN)
 143                 port->icount.overrun++;
 144
 145         if (stat & ULITE_STATUS_FRAME)
 146                 port->icount.frame++;
 147
 148
 149         /* drop byte with parity error if IGNPAR specificed */
 150         if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
 151                 stat &= ~ULITE_STATUS_RXVALID;
 152
 153         stat &= port->read_status_mask;
 154
 155         if (stat & ULITE_STATUS_PARITY)
 156                 flag = TTY_PARITY;
 157
 158
 159         stat &= ~port->ignore_status_mask;
 160
 161         if (stat & ULITE_STATUS_RXVALID)
 162                 tty_insert_flip_char(tport, ch, flag);
 163
 164         if (stat & ULITE_STATUS_FRAME)
 165                 tty_insert_flip_char(tport, 0, TTY_FRAME);
 166
 167         if (stat & ULITE_STATUS_OVERRUN)
 168                 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 169
 170         return 1;
 171 }
 172
 173 static int ulite_transmit(struct uart_port *port, int stat)
 174 {
 175         struct circ_buf *xmit  = &port->state->xmit;
 176
 177         if (stat & ULITE_STATUS_TXFULL)
 178                 return 0;
 179
 180         if (port->x_char) {
 181                 uart_out32(port->x_char, ULITE_TX, port);
 182                 port->x_char = 0;
 183                 port->icount.tx++;
 184                 return 1;
 185         }
 186
 187         if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 188                 return 0;
 189
 190         uart_out32(xmit->buf[xmit->tail], ULITE_TX, port);
 191         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
 192         port->icount.tx++;
 193
 194         /* wake up */
 195         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 196                 uart_write_wakeup(port);
 197
 198         return 1;
 199 }
 200
 201 static irqreturn_t ulite_isr(int irq, void *dev_id)
 202 {
 203         struct uart_port *port = dev_id;
 204         int stat, busy, n = 0;
 205         unsigned long flags;
 206
 207         do {
 208                 spin_lock_irqsave(&port->lock, flags);
 209                 stat = uart_in32(ULITE_STATUS, port);
 210                 busy  = ulite_receive(port, stat);
 211                 busy |= ulite_transmit(port, stat);
 212                 spin_unlock_irqrestore(&port->lock, flags);
 213                 n++;
 214         } while (busy);
 215
 216         /* work done? */
 217         if (n > 1) {
 218                 tty_flip_buffer_push(&port->state->port);
 219                 return IRQ_HANDLED;
 220         } else {
 221                 return IRQ_NONE;
 222         }
 223 }
 224
 225 static unsigned int ulite_tx_empty(struct uart_port *port)
 226 {
 227         unsigned long flags;
 228         unsigned int ret;
 229
 230         spin_lock_irqsave(&port->lock, flags);
 231         ret = uart_in32(ULITE_STATUS, port);
 232         spin_unlock_irqrestore(&port->lock, flags);
 233
 234         return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
 235 }
 236
 237 static unsigned int ulite_get_mctrl(struct uart_port *port)
 238 {
 239         return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 240 }
 241
 242 static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl)
 243 {
 244         /* N/A */
 245 }
 246
 247 static void ulite_stop_tx(struct uart_port *port)
 248 {
 249         /* N/A */
 250 }
 251
 252 static void ulite_start_tx(struct uart_port *port)
 253 {
 254         ulite_transmit(port, uart_in32(ULITE_STATUS, port));
 255 }
 256
 257 static void ulite_stop_rx(struct uart_port *port)
 258 {
 259         /* don't forward any more data (like !CREAD) */
 260         port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
 261                 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 262 }
 263
 264 static void ulite_break_ctl(struct uart_port *port, int ctl)
 265 {
 266         /* N/A */
 267 }
 268
 269 static int ulite_startup(struct uart_port *port)
 270 {
 271         struct uartlite_data *pdata = port->private_data;
 272         int ret;
 273
 274         ret = clk_enable(pdata->clk);
 275         if (ret) {
 276                 dev_err(port->dev, "Failed to enable clock\n");
 277                 return ret;
 278         }
 279
 280         ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
 281                           "uartlite", port);
 282         if (ret)
 283                 return ret;
 284
 285         uart_out32(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
 286                 ULITE_CONTROL, port);
 287         uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
 288
 289         return 0;
 290 }
 291
 292 static void ulite_shutdown(struct uart_port *port)
 293 {
 294         struct uartlite_data *pdata = port->private_data;
 295
 296         uart_out32(0, ULITE_CONTROL, port);
 297         uart_in32(ULITE_CONTROL, port); /* dummy */
 298         free_irq(port->irq, port);
 299         clk_disable(pdata->clk);
 300 }
 301
 302 static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
 303                               struct ktermios *old)
 304 {
 305         unsigned long flags;
 306         unsigned int baud;
 307
 308         spin_lock_irqsave(&port->lock, flags);
 309
 310         port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
 311                 | ULITE_STATUS_TXFULL;
 312
 313         if (termios->c_iflag & INPCK)
 314                 port->read_status_mask |=
 315                         ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
 316
 317         port->ignore_status_mask = 0;
 318         if (termios->c_iflag & IGNPAR)
 319                 port->ignore_status_mask |= ULITE_STATUS_PARITY
 320                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 321
 322         /* ignore all characters if CREAD is not set */
 323         if ((termios->c_cflag & CREAD) == 0)
 324                 port->ignore_status_mask |=
 325                         ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
 326                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 327
 328         /* update timeout */
 329         baud = uart_get_baud_rate(port, termios, old, 0, 460800);
 330         uart_update_timeout(port, termios->c_cflag, baud);
 331
 332         spin_unlock_irqrestore(&port->lock, flags);
 333 }
 334
 335 static const char *ulite_type(struct uart_port *port)
 336 {
 337         return port->type == PORT_UARTLITE ? "uartlite" : NULL;
 338 }
 339
 340 static void ulite_release_port(struct uart_port *port)
 341 {
 342         release_mem_region(port->mapbase, ULITE_REGION);
 343         iounmap(port->membase);
 344         port->membase = NULL;
 345 }
 346
 347 static int ulite_request_port(struct uart_port *port)
 348 {
 349         struct uartlite_data *pdata = port->private_data;
 350         int ret;
 351
 352         pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
 353                  port, (unsigned long long) port->mapbase);
 354
 355         if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
 356                 dev_err(port->dev, "Memory region busy\n");
 357                 return -EBUSY;
 358         }
 359
 360         port->membase = ioremap(port->mapbase, ULITE_REGION);
 361         if (!port->membase) {
 362                 dev_err(port->dev, "Unable to map registers\n");
 363                 release_mem_region(port->mapbase, ULITE_REGION);
 364                 return -EBUSY;
 365         }
 366
 367         pdata->reg_ops = &uartlite_be;
 368         ret = uart_in32(ULITE_CONTROL, port);
 369         uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port);
 370         ret = uart_in32(ULITE_STATUS, port);
 371         /* Endianess detection */
 372         if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY)
 373                 pdata->reg_ops = &uartlite_le;
 374
 375         return 0;
 376 }
 377
 378 static void ulite_config_port(struct uart_port *port, int flags)
 379 {
 380         if (!ulite_request_port(port))
 381                 port->type = PORT_UARTLITE;
 382 }
 383
 384 static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
 385 {
 386         /* we don't want the core code to modify any port params */
 387         return -EINVAL;
 388 }
 389
 390 static void ulite_pm(struct uart_port *port, unsigned int state,
 391                      unsigned int oldstate)
 392 {
 393         struct uartlite_data *pdata = port->private_data;
 394
 395         if (!state)
 396                 clk_enable(pdata->clk);
 397         else
 398                 clk_disable(pdata->clk);
 399 }
 400
 401 #ifdef CONFIG_CONSOLE_POLL
 402 static int ulite_get_poll_char(struct uart_port *port)
 403 {
 404         if (!(uart_in32(ULITE_STATUS, port) & ULITE_STATUS_RXVALID))
 405                 return NO_POLL_CHAR;
 406
 407         return uart_in32(ULITE_RX, port);
 408 }
 409
 410 static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
 411 {
 412         while (uart_in32(ULITE_STATUS, port) & ULITE_STATUS_TXFULL)
 413                 cpu_relax();
 414
 415         /* write char to device */
 416         uart_out32(ch, ULITE_TX, port);
 417 }
 418 #endif
 419
 420 static const struct uart_ops ulite_ops = {
 421         .tx_empty       = ulite_tx_empty,
 422         .set_mctrl      = ulite_set_mctrl,
 423         .get_mctrl      = ulite_get_mctrl,
 424         .stop_tx        = ulite_stop_tx,
 425         .start_tx       = ulite_start_tx,
 426         .stop_rx        = ulite_stop_rx,
 427         .break_ctl      = ulite_break_ctl,
 428         .startup        = ulite_startup,
 429         .shutdown       = ulite_shutdown,
 430         .set_termios    = ulite_set_termios,
 431         .type           = ulite_type,
 432         .release_port   = ulite_release_port,
 433         .request_port   = ulite_request_port,
 434         .config_port    = ulite_config_port,
 435         .verify_port    = ulite_verify_port,
 436         .pm             = ulite_pm,
 437 #ifdef CONFIG_CONSOLE_POLL
 438         .poll_get_char  = ulite_get_poll_char,
 439         .poll_put_char  = ulite_put_poll_char,
 440 #endif
 441 };
 442
 443 /* ---------------------------------------------------------------------
 444  * Console driver operations
 445  */
 446
 447 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 448 static void ulite_console_wait_tx(struct uart_port *port)
 449 {
 450         u8 val;
 451         unsigned long timeout;
 452
 453         /*
 454          * Spin waiting for TX fifo to have space available.
 455          * When using the Microblaze Debug Module this can take up to 1s
 456          */
 457         timeout = jiffies + msecs_to_jiffies(1000);
 458         while (1) {
 459                 val = uart_in32(ULITE_STATUS, port);
 460                 if ((val & ULITE_STATUS_TXFULL) == 0)
 461                         break;
 462                 if (time_after(jiffies, timeout)) {
 463                         dev_warn(port->dev,
 464                                  "timeout waiting for TX buffer empty\n");
 465                         break;
 466                 }
 467                 cpu_relax();
 468         }
 469 }
 470
 471 static void ulite_console_putchar(struct uart_port *port, int ch)
 472 {
 473         ulite_console_wait_tx(port);
 474         uart_out32(ch, ULITE_TX, port);
 475 }
 476
 477 static void ulite_console_write(struct console *co, const char *s,
 478                                 unsigned int count)
 479 {
 480         struct uart_port *port = console_port;
 481         unsigned long flags;
 482         unsigned int ier;
 483         int locked = 1;
 484
 485         if (oops_in_progress) {
 486                 locked = spin_trylock_irqsave(&port->lock, flags);
 487         } else
 488                 spin_lock_irqsave(&port->lock, flags);
 489
 490         /* save and disable interrupt */
 491         ier = uart_in32(ULITE_STATUS, port) & ULITE_STATUS_IE;
 492         uart_out32(0, ULITE_CONTROL, port);
 493
 494         uart_console_write(port, s, count, ulite_console_putchar);
 495
 496         ulite_console_wait_tx(port);
 497
 498         /* restore interrupt state */
 499         if (ier)
 500                 uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
 501
 502         if (locked)
 503                 spin_unlock_irqrestore(&port->lock, flags);
 504 }
 505
 506 static int ulite_console_setup(struct console *co, char *options)
 507 {
 508         struct uart_port *port;
 509         int baud = 9600;
 510         int bits = 8;
 511         int parity = 'n';
 512         int flow = 'n';
 513
 514
 515         port = console_port;
 516
 517         /* Has the device been initialized yet? */
 518         if (!port->mapbase) {
 519                 pr_debug("console on ttyUL%i not present\n", co->index);
 520                 return -ENODEV;
 521         }
 522
 523         /* not initialized yet? */
 524         if (!port->membase) {
 525                 if (ulite_request_port(port))
 526                         return -ENODEV;
 527         }
 528
 529         if (options)
 530                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 531
 532         return uart_set_options(port, co, baud, parity, bits, flow);
 533 }
 534
 535 static struct uart_driver ulite_uart_driver;
 536
 537 static struct console ulite_console = {
 538         .name   = ULITE_NAME,
 539         .write  = ulite_console_write,
 540         .device = uart_console_device,
 541         .setup  = ulite_console_setup,
 542         .flags  = CON_PRINTBUFFER,
 543         .index  = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
 544         .data   = &ulite_uart_driver,
 545 };
 546
 547 static void early_uartlite_putc(struct uart_port *port, int c)
 548 {
 549         /*
 550          * Limit how many times we'll spin waiting for TX FIFO status.
 551          * This will prevent lockups if the base address is incorrectly
 552          * set, or any other issue on the UARTLITE.
 553          * This limit is pretty arbitrary, unless we are at about 10 baud
 554          * we'll never timeout on a working UART.
 555          */
 556
 557         unsigned retries = 1000000;
 558         /* read status bit - 0x8 offset */
 559         while (--retries && (readl(port->membase + 8) & (1 << 3)))
 560                 ;
 561
 562         /* Only attempt the iowrite if we didn't timeout */
 563         /* write to TX_FIFO - 0x4 offset */
 564         if (retries)
 565                 writel(c & 0xff, port->membase + 4);
 566 }
 567
 568 static void early_uartlite_write(struct console *console,
 569                                  const char *s, unsigned n)
 570 {
 571         struct earlycon_device *device = console->data;
 572         uart_console_write(&device->port, s, n, early_uartlite_putc);
 573 }
 574
 575 static int __init early_uartlite_setup(struct earlycon_device *device,
 576                                        const char *options)
 577 {
 578         if (!device->port.membase)
 579                 return -ENODEV;
 580
 581         device->con->write = early_uartlite_write;
 582         return 0;
 583 }
 584 EARLYCON_DECLARE(uartlite, early_uartlite_setup);
 585 OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);
 586 OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);
 587
 588 #endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
 589
 590 static struct uart_driver ulite_uart_driver = {
 591         .owner          = THIS_MODULE,
 592         .driver_name    = "uartlite",
 593         .dev_name       = ULITE_NAME,
 594         .major          = ULITE_MAJOR,
 595         .minor          = ULITE_MINOR,
 596         .nr             = ULITE_NR_UARTS,
 597 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 598         .cons           = &ulite_console,
 599 #endif
 600 };
 601
 602 /* ---------------------------------------------------------------------
 603  * Port assignment functions (mapping devices to uart_port structures)
 604  */
 605
 606 /** ulite_assign: register a uartlite device with the driver
 607  *
 608  * @dev: pointer to device structure
 609  * @id: requested id number.  Pass -1 for automatic port assignment
 610  * @base: base address of uartlite registers
 611  * @irq: irq number for uartlite
 612  * @pdata: private data for uartlite
 613  *
 614  * Returns: 0 on success, <0 otherwise
 615  */
 616 static int ulite_assign(struct device *dev, int id, u32 base, int irq,
 617                         struct uartlite_data *pdata)
 618 {
 619         struct uart_port *port;
 620         int rc;
 621
 622         /* if id = -1; then scan for a free id and use that */
 623         if (id < 0) {
 624                 for (id = 0; id < ULITE_NR_UARTS; id++)
 625                         if (ulite_ports[id].mapbase == 0)
 626                                 break;
 627         }
 628         if (id < 0 || id >= ULITE_NR_UARTS) {
 629                 dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
 630                 return -EINVAL;
 631         }
 632
 633         if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
 634                 dev_err(dev, "cannot assign to %s%i; it is already in use\n",
 635                         ULITE_NAME, id);
 636                 return -EBUSY;
 637         }
 638
 639         port = &ulite_ports[id];
 640
 641         spin_lock_init(&port->lock);
 642         port->fifosize = 16;
 643         port->regshift = 2;
 644         port->iotype = UPIO_MEM;
 645         port->iobase = 1; /* mark port in use */
 646         port->mapbase = base;
 647         port->membase = NULL;
 648         port->ops = &ulite_ops;
 649         port->irq = irq;
 650         port->flags = UPF_BOOT_AUTOCONF;
 651         port->dev = dev;
 652         port->type = PORT_UNKNOWN;
 653         port->line = id;
 654         port->private_data = pdata;
 655
 656         dev_set_drvdata(dev, port);
 657
 658 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 659         /*
 660          * If console hasn't been found yet try to assign this port
 661          * because it is required to be assigned for console setup function.
 662          * If register_console() don't assign value, then console_port pointer
 663          * is cleanup.
 664          */
 665         if (ulite_uart_driver.cons->index == -1)
 666                 console_port = port;
 667 #endif
 668
 669         /* Register the port */
 670         rc = uart_add_one_port(&ulite_uart_driver, port);
 671         if (rc) {
 672                 dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
 673                 port->mapbase = 0;
 674                 dev_set_drvdata(dev, NULL);
 675                 return rc;
 676         }
 677
 678 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 679         /* This is not port which is used for console that's why clean it up */
 680         if (ulite_uart_driver.cons->index == -1)
 681                 console_port = NULL;
 682 #endif
 683
 684         return 0;
 685 }
 686
 687 /** ulite_release: register a uartlite device with the driver
 688  *
 689  * @dev: pointer to device structure
 690  */
 691 static int ulite_release(struct device *dev)
 692 {
 693         struct uart_port *port = dev_get_drvdata(dev);
 694         int rc = 0;
 695
 696         if (port) {
 697                 rc = uart_remove_one_port(&ulite_uart_driver, port);
 698                 dev_set_drvdata(dev, NULL);
 699                 port->mapbase = 0;
 700         }
 701
 702         return rc;
 703 }
 704
 705 /**
 706  * ulite_suspend - Stop the device.
 707  *
 708  * @dev: handle to the device structure.
 709  * Return: 0 always.
 710  */
 711 static int __maybe_unused ulite_suspend(struct device *dev)
 712 {
 713         struct uart_port *port = dev_get_drvdata(dev);
 714
 715         if (port)
 716                 uart_suspend_port(&ulite_uart_driver, port);
 717
 718         return 0;
 719 }
 720
 721 /**
 722  * ulite_resume - Resume the device.
 723  *
 724  * @dev: handle to the device structure.
 725  * Return: 0 on success, errno otherwise.
 726  */
 727 static int __maybe_unused ulite_resume(struct device *dev)
 728 {
 729         struct uart_port *port = dev_get_drvdata(dev);
 730
 731         if (port)
 732                 uart_resume_port(&ulite_uart_driver, port);
 733
 734         return 0;
 735 }
 736
 737 /* ---------------------------------------------------------------------
 738  * Platform bus binding
 739  */
 740
 741 static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume);
 742
 743 #if defined(CONFIG_OF)
 744 /* Match table for of_platform binding */
 745 static const struct of_device_id ulite_of_match[] = {
 746         { .compatible = "xlnx,opb-uartlite-1.00.b", },
 747         { .compatible = "xlnx,xps-uartlite-1.00.a", },
 748         {}
 749 };
 750 MODULE_DEVICE_TABLE(of, ulite_of_match);
 751 #endif /* CONFIG_OF */
 752
 753 static int ulite_probe(struct platform_device *pdev)
 754 {
 755         struct resource *res;
 756         struct uartlite_data *pdata;
 757         int irq, ret;
 758         int id = pdev->id;
 759 #ifdef CONFIG_OF
 760         const __be32 *prop;
 761
 762         prop = of_get_property(pdev->dev.of_node, "port-number", NULL);
 763         if (prop)
 764                 id = be32_to_cpup(prop);
 765 #endif
 766         pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
 767                              GFP_KERNEL);
 768         if (!pdata)
 769                 return -ENOMEM;
 770
 771         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 772         if (!res)
 773                 return -ENODEV;
 774
 775         irq = platform_get_irq(pdev, 0);
 776         if (irq <= 0)
 777                 return -ENXIO;
 778
 779         pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
 780         if (IS_ERR(pdata->clk)) {
 781                 if (PTR_ERR(pdata->clk) != -ENOENT)
 782                         return PTR_ERR(pdata->clk);
 783
 784                 /*
 785                  * Clock framework support is optional, continue on
 786                  * anyways if we don't find a matching clock.
 787                  */
 788                 pdata->clk = NULL;
 789         }
 790
 791         ret = clk_prepare_enable(pdata->clk);
 792         if (ret) {
 793                 dev_err(&pdev->dev, "Failed to prepare clock\n");
 794                 return ret;
 795         }
 796
 797         if (!ulite_uart_driver.state) {
 798                 dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
 799                 ret = uart_register_driver(&ulite_uart_driver);
 800                 if (ret < 0) {
 801                         dev_err(&pdev->dev, "Failed to register driver\n");
 802                         return ret;
 803                 }
 804         }
 805
 806         ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
 807
 808         clk_disable(pdata->clk);
 809
 810         return ret;
 811 }
 812
 813 static int ulite_remove(struct platform_device *pdev)
 814 {
 815         struct uart_port *port = dev_get_drvdata(&pdev->dev);
 816         struct uartlite_data *pdata = port->private_data;
 817
 818         clk_disable_unprepare(pdata->clk);
 819         return ulite_release(&pdev->dev);
 820 }
 821
 822 /* work with hotplug and coldplug */
 823 MODULE_ALIAS("platform:uartlite");
 824
 825 static struct platform_driver ulite_platform_driver = {
 826         .probe = ulite_probe,
 827         .remove = ulite_remove,
 828         .driver = {
 829                 .name  = "uartlite",
 830                 .of_match_table = of_match_ptr(ulite_of_match),
 831                 .pm = &ulite_pm_ops,
 832         },
 833 };
 834
 835 /* ---------------------------------------------------------------------
 836  * Module setup/teardown
 837  */
 838
 839 static int __init ulite_init(void)
 840 {
 841
 842         pr_debug("uartlite: calling platform_driver_register()\n");
 843         return platform_driver_register(&ulite_platform_driver);
 844 }
 845
 846 static void __exit ulite_exit(void)
 847 {
 848         platform_driver_unregister(&ulite_platform_driver);
 849         if (ulite_uart_driver.state)
 850                 uart_unregister_driver(&ulite_uart_driver);
 851 }
 852
 853 module_init(ulite_init);
 854 module_exit(ulite_exit);
 855
 856 MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
 857 MODULE_DESCRIPTION("Xilinx uartlite serial driver");
 858 MODULE_LICENSE("GPL");