irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler
[linux/fpc-iii.git] / drivers / net / usb / cdc_ether.c
blob3da70bf9936a846c5939c389c2d91af1c674af58
1 /*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 // #define DEBUG // error path messages, extra info
21 // #define VERBOSE // more; success messages
23 #include <linux/module.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/workqueue.h>
28 #include <linux/mii.h>
29 #include <linux/usb.h>
30 #include <linux/usb/cdc.h>
31 #include <linux/usb/usbnet.h>
34 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
36 static int is_rndis(struct usb_interface_descriptor *desc)
38 return (desc->bInterfaceClass == USB_CLASS_COMM &&
39 desc->bInterfaceSubClass == 2 &&
40 desc->bInterfaceProtocol == 0xff);
43 static int is_activesync(struct usb_interface_descriptor *desc)
45 return (desc->bInterfaceClass == USB_CLASS_MISC &&
46 desc->bInterfaceSubClass == 1 &&
47 desc->bInterfaceProtocol == 1);
50 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
52 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53 desc->bInterfaceSubClass == 1 &&
54 desc->bInterfaceProtocol == 3);
57 #else
59 #define is_rndis(desc) 0
60 #define is_activesync(desc) 0
61 #define is_wireless_rndis(desc) 0
63 #endif
65 static const u8 mbm_guid[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
70 static void usbnet_cdc_update_filter(struct usbnet *dev)
72 struct cdc_state *info = (void *) &dev->data;
73 struct usb_interface *intf = info->control;
74 struct net_device *net = dev->net;
76 u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
77 | USB_CDC_PACKET_TYPE_BROADCAST;
79 /* filtering on the device is an optional feature and not worth
80 * the hassle so we just roughly care about snooping and if any
81 * multicast is requested, we take every multicast
83 if (net->flags & IFF_PROMISC)
84 cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
85 if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
86 cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
88 usb_control_msg(dev->udev,
89 usb_sndctrlpipe(dev->udev, 0),
90 USB_CDC_SET_ETHERNET_PACKET_FILTER,
91 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
92 cdc_filter,
93 intf->cur_altsetting->desc.bInterfaceNumber,
94 NULL,
96 USB_CTRL_SET_TIMEOUT
100 /* probes control interface, claims data interface, collects the bulk
101 * endpoints, activates data interface (if needed), maybe sets MTU.
102 * all pure cdc, except for certain firmware workarounds, and knowing
103 * that rndis uses one different rule.
105 int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
107 u8 *buf = intf->cur_altsetting->extra;
108 int len = intf->cur_altsetting->extralen;
109 struct usb_interface_descriptor *d;
110 struct cdc_state *info = (void *) &dev->data;
111 int status;
112 int rndis;
113 bool android_rndis_quirk = false;
114 struct usb_driver *driver = driver_of(intf);
115 struct usb_cdc_parsed_header header;
117 if (sizeof(dev->data) < sizeof(*info))
118 return -EDOM;
120 /* expect strict spec conformance for the descriptors, but
121 * cope with firmware which stores them in the wrong place
123 if (len == 0 && dev->udev->actconfig->extralen) {
124 /* Motorola SB4100 (and others: Brad Hards says it's
125 * from a Broadcom design) put CDC descriptors here
127 buf = dev->udev->actconfig->extra;
128 len = dev->udev->actconfig->extralen;
129 dev_dbg(&intf->dev, "CDC descriptors on config\n");
132 /* Maybe CDC descriptors are after the endpoint? This bug has
133 * been seen on some 2Wire Inc RNDIS-ish products.
135 if (len == 0) {
136 struct usb_host_endpoint *hep;
138 hep = intf->cur_altsetting->endpoint;
139 if (hep) {
140 buf = hep->extra;
141 len = hep->extralen;
143 if (len)
144 dev_dbg(&intf->dev,
145 "CDC descriptors on endpoint\n");
148 /* this assumes that if there's a non-RNDIS vendor variant
149 * of cdc-acm, it'll fail RNDIS requests cleanly.
151 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
152 is_activesync(&intf->cur_altsetting->desc) ||
153 is_wireless_rndis(&intf->cur_altsetting->desc));
155 memset(info, 0, sizeof(*info));
156 info->control = intf;
158 cdc_parse_cdc_header(&header, intf, buf, len);
160 info->u = header.usb_cdc_union_desc;
161 info->header = header.usb_cdc_header_desc;
162 info->ether = header.usb_cdc_ether_desc;
163 /* we need a master/control interface (what we're
164 * probed with) and a slave/data interface; union
165 * descriptors sort this all out.
167 info->control = usb_ifnum_to_if(dev->udev,
168 info->u->bMasterInterface0);
169 info->data = usb_ifnum_to_if(dev->udev,
170 info->u->bSlaveInterface0);
171 if (!info->control || !info->data) {
172 dev_dbg(&intf->dev,
173 "master #%u/%p slave #%u/%p\n",
174 info->u->bMasterInterface0,
175 info->control,
176 info->u->bSlaveInterface0,
177 info->data);
178 /* fall back to hard-wiring for RNDIS */
179 if (rndis) {
180 android_rndis_quirk = true;
181 goto skip;
183 goto bad_desc;
185 if (info->control != intf) {
186 dev_dbg(&intf->dev, "bogus CDC Union\n");
187 /* Ambit USB Cable Modem (and maybe others)
188 * interchanges master and slave interface.
190 if (info->data == intf) {
191 info->data = info->control;
192 info->control = intf;
193 } else
194 goto bad_desc;
197 /* some devices merge these - skip class check */
198 if (info->control == info->data)
199 goto skip;
201 /* a data interface altsetting does the real i/o */
202 d = &info->data->cur_altsetting->desc;
203 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
204 dev_dbg(&intf->dev, "slave class %u\n",
205 d->bInterfaceClass);
206 goto bad_desc;
208 skip:
209 if ( rndis &&
210 header.usb_cdc_acm_descriptor &&
211 header.usb_cdc_acm_descriptor->bmCapabilities) {
212 dev_dbg(&intf->dev,
213 "ACM capabilities %02x, not really RNDIS?\n",
214 header.usb_cdc_acm_descriptor->bmCapabilities);
215 goto bad_desc;
218 if (header.usb_cdc_ether_desc) {
219 dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
220 /* because of Zaurus, we may be ignoring the host
221 * side link address we were given.
225 if (header.usb_cdc_mdlm_desc &&
226 memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
227 dev_dbg(&intf->dev, "GUID doesn't match\n");
228 goto bad_desc;
231 if (header.usb_cdc_mdlm_detail_desc &&
232 header.usb_cdc_mdlm_detail_desc->bLength <
233 (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
234 dev_dbg(&intf->dev, "Descriptor too short\n");
235 goto bad_desc;
240 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
241 * CDC descriptors, so we'll hard-wire the interfaces and not check
242 * for descriptors.
244 * Some Android RNDIS devices have a CDC Union descriptor pointing
245 * to non-existing interfaces. Ignore that and attempt the same
246 * hard-wired 0 and 1 interfaces.
248 if (rndis && (!info->u || android_rndis_quirk)) {
249 info->control = usb_ifnum_to_if(dev->udev, 0);
250 info->data = usb_ifnum_to_if(dev->udev, 1);
251 if (!info->control || !info->data || info->control != intf) {
252 dev_dbg(&intf->dev,
253 "rndis: master #0/%p slave #1/%p\n",
254 info->control,
255 info->data);
256 goto bad_desc;
259 } else if (!info->header || !info->u || (!rndis && !info->ether)) {
260 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
261 info->header ? "" : "header ",
262 info->u ? "" : "union ",
263 info->ether ? "" : "ether ");
264 goto bad_desc;
267 /* claim data interface and set it up ... with side effects.
268 * network traffic can't flow until an altsetting is enabled.
270 if (info->data != info->control) {
271 status = usb_driver_claim_interface(driver, info->data, dev);
272 if (status < 0)
273 return status;
275 status = usbnet_get_endpoints(dev, info->data);
276 if (status < 0) {
277 /* ensure immediate exit from usbnet_disconnect */
278 usb_set_intfdata(info->data, NULL);
279 if (info->data != info->control)
280 usb_driver_release_interface(driver, info->data);
281 return status;
284 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
285 if (info->data != info->control)
286 dev->status = NULL;
287 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
288 struct usb_endpoint_descriptor *desc;
290 dev->status = &info->control->cur_altsetting->endpoint [0];
291 desc = &dev->status->desc;
292 if (!usb_endpoint_is_int_in(desc) ||
293 (le16_to_cpu(desc->wMaxPacketSize)
294 < sizeof(struct usb_cdc_notification)) ||
295 !desc->bInterval) {
296 dev_dbg(&intf->dev, "bad notification endpoint\n");
297 dev->status = NULL;
300 if (rndis && !dev->status) {
301 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
302 usb_set_intfdata(info->data, NULL);
303 usb_driver_release_interface(driver, info->data);
304 return -ENODEV;
307 /* Some devices don't initialise properly. In particular
308 * the packet filter is not reset. There are devices that
309 * don't do reset all the way. So the packet filter should
310 * be set to a sane initial value.
312 usbnet_cdc_update_filter(dev);
314 return 0;
316 bad_desc:
317 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
318 return -ENODEV;
320 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
322 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
324 struct cdc_state *info = (void *) &dev->data;
325 struct usb_driver *driver = driver_of(intf);
327 /* combined interface - nothing to do */
328 if (info->data == info->control)
329 return;
331 /* disconnect master --> disconnect slave */
332 if (intf == info->control && info->data) {
333 /* ensure immediate exit from usbnet_disconnect */
334 usb_set_intfdata(info->data, NULL);
335 usb_driver_release_interface(driver, info->data);
336 info->data = NULL;
339 /* and vice versa (just in case) */
340 else if (intf == info->data && info->control) {
341 /* ensure immediate exit from usbnet_disconnect */
342 usb_set_intfdata(info->control, NULL);
343 usb_driver_release_interface(driver, info->control);
344 info->control = NULL;
347 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
349 /* Communications Device Class, Ethernet Control model
351 * Takes two interfaces. The DATA interface is inactive till an altsetting
352 * is selected. Configuration data includes class descriptors. There's
353 * an optional status endpoint on the control interface.
355 * This should interop with whatever the 2.4 "CDCEther.c" driver
356 * (by Brad Hards) talked with, with more functionality.
359 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
361 netif_info(dev, timer, dev->net,
362 "link speeds: %u kbps up, %u kbps down\n",
363 __le32_to_cpu(speeds[0]) / 1000,
364 __le32_to_cpu(speeds[1]) / 1000);
367 void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
369 struct usb_cdc_notification *event;
371 if (urb->actual_length < sizeof(*event))
372 return;
374 /* SPEED_CHANGE can get split into two 8-byte packets */
375 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
376 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
377 return;
380 event = urb->transfer_buffer;
381 switch (event->bNotificationType) {
382 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
383 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
384 event->wValue ? "on" : "off");
385 usbnet_link_change(dev, !!event->wValue, 0);
386 break;
387 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
388 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
389 urb->actual_length);
390 if (urb->actual_length != (sizeof(*event) + 8))
391 set_bit(EVENT_STS_SPLIT, &dev->flags);
392 else
393 dumpspeed(dev, (__le32 *) &event[1]);
394 break;
395 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
396 * but there are no standard formats for the response data.
398 default:
399 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
400 event->bNotificationType);
401 break;
404 EXPORT_SYMBOL_GPL(usbnet_cdc_status);
406 int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
408 int status;
409 struct cdc_state *info = (void *) &dev->data;
411 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
412 < sizeof(struct cdc_state)));
414 status = usbnet_generic_cdc_bind(dev, intf);
415 if (status < 0)
416 return status;
418 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
419 if (status < 0) {
420 usb_set_intfdata(info->data, NULL);
421 usb_driver_release_interface(driver_of(intf), info->data);
422 return status;
425 return 0;
427 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
429 static const struct driver_info cdc_info = {
430 .description = "CDC Ethernet Device",
431 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
432 .bind = usbnet_cdc_bind,
433 .unbind = usbnet_cdc_unbind,
434 .status = usbnet_cdc_status,
435 .set_rx_mode = usbnet_cdc_update_filter,
436 .manage_power = usbnet_manage_power,
439 static const struct driver_info wwan_info = {
440 .description = "Mobile Broadband Network Device",
441 .flags = FLAG_WWAN,
442 .bind = usbnet_cdc_bind,
443 .unbind = usbnet_cdc_unbind,
444 .status = usbnet_cdc_status,
445 .set_rx_mode = usbnet_cdc_update_filter,
446 .manage_power = usbnet_manage_power,
449 /*-------------------------------------------------------------------------*/
451 #define HUAWEI_VENDOR_ID 0x12D1
452 #define NOVATEL_VENDOR_ID 0x1410
453 #define ZTE_VENDOR_ID 0x19D2
454 #define DELL_VENDOR_ID 0x413C
455 #define REALTEK_VENDOR_ID 0x0bda
456 #define SAMSUNG_VENDOR_ID 0x04e8
457 #define LENOVO_VENDOR_ID 0x17ef
458 #define NVIDIA_VENDOR_ID 0x0955
460 static const struct usb_device_id products[] = {
461 /* BLACKLIST !!
463 * First blacklist any products that are egregiously nonconformant
464 * with the CDC Ethernet specs. Minor braindamage we cope with; when
465 * they're not even trying, needing a separate driver is only the first
466 * of the differences to show up.
469 #define ZAURUS_MASTER_INTERFACE \
470 .bInterfaceClass = USB_CLASS_COMM, \
471 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
472 .bInterfaceProtocol = USB_CDC_PROTO_NONE
474 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
475 * wire-incompatible with true CDC Ethernet implementations.
476 * (And, it seems, needlessly so...)
479 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
480 | USB_DEVICE_ID_MATCH_DEVICE,
481 .idVendor = 0x04DD,
482 .idProduct = 0x8004,
483 ZAURUS_MASTER_INTERFACE,
484 .driver_info = 0,
487 /* PXA-25x based Sharp Zaurii. Note that it seems some of these
488 * (later models especially) may have shipped only with firmware
489 * advertising false "CDC MDLM" compatibility ... but we're not
490 * clear which models did that, so for now let's assume the worst.
493 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
494 | USB_DEVICE_ID_MATCH_DEVICE,
495 .idVendor = 0x04DD,
496 .idProduct = 0x8005, /* A-300 */
497 ZAURUS_MASTER_INTERFACE,
498 .driver_info = 0,
499 }, {
500 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
501 | USB_DEVICE_ID_MATCH_DEVICE,
502 .idVendor = 0x04DD,
503 .idProduct = 0x8006, /* B-500/SL-5600 */
504 ZAURUS_MASTER_INTERFACE,
505 .driver_info = 0,
506 }, {
507 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
508 | USB_DEVICE_ID_MATCH_DEVICE,
509 .idVendor = 0x04DD,
510 .idProduct = 0x8007, /* C-700 */
511 ZAURUS_MASTER_INTERFACE,
512 .driver_info = 0,
513 }, {
514 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
515 | USB_DEVICE_ID_MATCH_DEVICE,
516 .idVendor = 0x04DD,
517 .idProduct = 0x9031, /* C-750 C-760 */
518 ZAURUS_MASTER_INTERFACE,
519 .driver_info = 0,
520 }, {
521 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
522 | USB_DEVICE_ID_MATCH_DEVICE,
523 .idVendor = 0x04DD,
524 .idProduct = 0x9032, /* SL-6000 */
525 ZAURUS_MASTER_INTERFACE,
526 .driver_info = 0,
527 }, {
528 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
529 | USB_DEVICE_ID_MATCH_DEVICE,
530 .idVendor = 0x04DD,
531 /* reported with some C860 units */
532 .idProduct = 0x9050, /* C-860 */
533 ZAURUS_MASTER_INTERFACE,
534 .driver_info = 0,
537 /* Olympus has some models with a Zaurus-compatible option.
538 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
541 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
542 | USB_DEVICE_ID_MATCH_DEVICE,
543 .idVendor = 0x07B4,
544 .idProduct = 0x0F02, /* R-1000 */
545 ZAURUS_MASTER_INTERFACE,
546 .driver_info = 0,
549 /* LG Electronics VL600 wants additional headers on every frame */
551 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
552 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
553 .driver_info = 0,
556 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
558 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
559 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
560 .driver_info = 0,
563 /* Novatel USB551L and MC551 - handled by qmi_wwan */
565 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
566 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
567 .driver_info = 0,
570 /* Novatel E362 - handled by qmi_wwan */
572 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
573 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
574 .driver_info = 0,
577 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
579 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
580 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
581 .driver_info = 0,
584 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
586 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
587 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
588 .driver_info = 0,
591 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
593 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
594 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
595 .driver_info = 0,
598 /* Novatel Expedite E371 - handled by qmi_wwan */
600 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
601 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
602 .driver_info = 0,
605 /* AnyDATA ADU960S - handled by qmi_wwan */
607 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
608 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
609 .driver_info = 0,
612 /* Huawei E1820 - handled by qmi_wwan */
614 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
615 .driver_info = 0,
618 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
620 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
621 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
622 .driver_info = 0,
625 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
627 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
628 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
629 .driver_info = 0,
632 /* Samsung USB Ethernet Adapters */
634 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
635 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
636 .driver_info = 0,
639 /* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
641 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
642 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
643 .driver_info = 0,
646 /* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
648 USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
649 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
650 .driver_info = 0,
653 /* WHITELIST!!!
655 * CDC Ether uses two interfaces, not necessarily consecutive.
656 * We match the main interface, ignoring the optional device
657 * class so we could handle devices that aren't exclusively
658 * CDC ether.
660 * NOTE: this match must come AFTER entries blacklisting devices
661 * because of bugs/quirks in a given product (like Zaurus, above).
664 /* ZTE (Vodafone) K3805-Z */
665 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
666 USB_CDC_SUBCLASS_ETHERNET,
667 USB_CDC_PROTO_NONE),
668 .driver_info = (unsigned long)&wwan_info,
669 }, {
670 /* ZTE (Vodafone) K3806-Z */
671 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
672 USB_CDC_SUBCLASS_ETHERNET,
673 USB_CDC_PROTO_NONE),
674 .driver_info = (unsigned long)&wwan_info,
675 }, {
676 /* ZTE (Vodafone) K4510-Z */
677 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
678 USB_CDC_SUBCLASS_ETHERNET,
679 USB_CDC_PROTO_NONE),
680 .driver_info = (unsigned long)&wwan_info,
681 }, {
682 /* ZTE (Vodafone) K3770-Z */
683 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
684 USB_CDC_SUBCLASS_ETHERNET,
685 USB_CDC_PROTO_NONE),
686 .driver_info = (unsigned long)&wwan_info,
687 }, {
688 /* ZTE (Vodafone) K3772-Z */
689 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
690 USB_CDC_SUBCLASS_ETHERNET,
691 USB_CDC_PROTO_NONE),
692 .driver_info = (unsigned long)&wwan_info,
693 }, {
694 /* Telit modules */
695 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
696 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
697 .driver_info = (kernel_ulong_t) &wwan_info,
698 }, {
699 /* Dell DW5580 modules */
700 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
701 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
702 .driver_info = (kernel_ulong_t)&wwan_info,
703 }, {
704 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
705 USB_CDC_PROTO_NONE),
706 .driver_info = (unsigned long) &cdc_info,
707 }, {
708 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
709 USB_CDC_PROTO_NONE),
710 .driver_info = (unsigned long)&wwan_info,
712 }, {
713 /* Various Huawei modems with a network port like the UMG1831 */
714 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
715 USB_CDC_SUBCLASS_ETHERNET, 255),
716 .driver_info = (unsigned long)&wwan_info,
718 { }, /* END */
720 MODULE_DEVICE_TABLE(usb, products);
722 static struct usb_driver cdc_driver = {
723 .name = "cdc_ether",
724 .id_table = products,
725 .probe = usbnet_probe,
726 .disconnect = usbnet_disconnect,
727 .suspend = usbnet_suspend,
728 .resume = usbnet_resume,
729 .reset_resume = usbnet_resume,
730 .supports_autosuspend = 1,
731 .disable_hub_initiated_lpm = 1,
734 module_usb_driver(cdc_driver);
736 MODULE_AUTHOR("David Brownell");
737 MODULE_DESCRIPTION("USB CDC Ethernet devices");
738 MODULE_LICENSE("GPL");