test/MC/ARM/eh-directive-save.s

   1 @ RUN: llvm-mc %s -triple=armv7-unknown-linux-gnueabi -filetype=obj -o - \
   2 @ RUN:   | llvm-readobj -S --sd | FileCheck %s
   3
   4 @ Check the .save directive
   5
   6 @ The .save directive records the GPR registers which are pushed to the
   7 @ stack.  There are 4 different unwind opcodes:
   8 @
   9 @     0xB100: pop r[3:0]
  10 @     0xA0:   pop r[(4+x):4]            @ r[4+x]-r[4] must be consecutive.
  11 @     0xA8:   pop r14, r[(4+x):4]       @ r[4+x]-r[4] must be consecutive.
  12 @     0x8000: pop r[15:4]
  13 @
  14 @ If register list specifed by .save directive is possible to be encoded
  15 @ by 0xA0 or 0xA8, then the assembler should prefer them over 0x8000.
  16
  17
  18         .syntax unified
  19
  20 @-------------------------------------------------------------------------------
  21 @ TEST1
  22 @-------------------------------------------------------------------------------
  23         .section        .TEST1
  24         .globl  func1a
  25         .align  2
  26         .type   func1a,%function
  27         .fnstart
  28 func1a:
  29         .save   {r0}
  30         push    {r0}
  31         pop     {r0}
  32         bx      lr
  33         .personality __gxx_personality_v0
  34         .handlerdata
  35         .fnend
  36
  37         .globl  func1b
  38         .align  2
  39         .type   func1b,%function
  40         .fnstart
  41 func1b:
  42         .save   {r0, r1}
  43         push    {r0, r1}
  44         pop     {r0, r1}
  45         bx      lr
  46         .personality __gxx_personality_v0
  47         .handlerdata
  48         .fnend
  49
  50         .globl  func1c
  51         .align  2
  52         .type   func1c,%function
  53         .fnstart
  54 func1c:
  55         .save   {r0, r2}
  56         push    {r0, r2}
  57         pop     {r0, r2}
  58         bx      lr
  59         .personality __gxx_personality_v0
  60         .handlerdata
  61         .fnend
  62
  63         .globl  func1d
  64         .align  2
  65         .type   func1d,%function
  66         .fnstart
  67 func1d:
  68         .save   {r1, r2}
  69         push    {r1, r2}
  70         pop     {r1, r2}
  71         bx      lr
  72         .personality __gxx_personality_v0
  73         .handlerdata
  74         .fnend
  75
  76         .globl  func1e
  77         .align  2
  78         .type   func1e,%function
  79         .fnstart
  80 func1e:
  81         .save   {r0, r1, r2, r3}
  82         push    {r0, r1, r2, r3}
  83         pop     {r0, r1, r2, r3}
  84         bx      lr
  85         .personality __gxx_personality_v0
  86         .handlerdata
  87         .fnend
  88
  89 @-------------------------------------------------------------------------------
  90 @ The assembler should emit 0xB000 unwind opcode.
  91 @-------------------------------------------------------------------------------
  92 @ CHECK: Section {
  93 @ CHECK:   Name: .ARM.extab.TEST1
  94 @ CHECK:   SectionData (
  95 @ CHECK:     0000: 00000000 B001B100 00000000 B003B100  |................|
  96 @ CHECK:     0010: 00000000 B005B100 00000000 B006B100  |................|
  97 @ CHECK:     0020: 00000000 B00FB100                    |........|
  98 @ CHECK:   )
  99 @ CHECK: }
 100
 101
 102
 103 @-------------------------------------------------------------------------------
 104 @ TEST2
 105 @-------------------------------------------------------------------------------
 106         .section        .TEST2
 107         .globl  func2a
 108         .align  2
 109         .type   func2a,%function
 110         .fnstart
 111 func2a:
 112         .save   {r4}
 113         push    {r4}
 114         pop     {r4}
 115         bx      lr
 116         .personality __gxx_personality_v0
 117         .handlerdata
 118         .fnend
 119
 120         .globl  func2b
 121         .align  2
 122         .type   func2b,%function
 123         .fnstart
 124 func2b:
 125         .save   {r4, r5}
 126         push    {r4, r5}
 127         pop     {r4, r5}
 128         bx      lr
 129         .personality __gxx_personality_v0
 130         .handlerdata
 131         .fnend
 132
 133         .globl  func2c
 134         .align  2
 135         .type   func2c,%function
 136         .fnstart
 137 func2c:
 138         .save   {r4, r5, r6, r7, r8, r9, r10, r11}
 139         push    {r4, r5, r6, r7, r8, r9, r10, r11}
 140         pop     {r4, r5, r6, r7, r8, r9, r10, r11}
 141         bx      lr
 142         .personality __gxx_personality_v0
 143         .handlerdata
 144         .fnend
 145
 146 @-------------------------------------------------------------------------------
 147 @ The assembler should emit 0xA0 unwind opcode.
 148 @-------------------------------------------------------------------------------
 149 @ CHECK: Section {
 150 @ CHECK:   Name: .ARM.extab.TEST2
 151 @ CHECK:   SectionData (
 152 @ CHECK:     0000: 00000000 B0B0A000 00000000 B0B0A100  |................|
 153 @ CHECK:     0010: 00000000 B0B0A700                    |........|
 154 @ CHECK:   )
 155 @ CHECK: }
 156
 157
 158
 159 @-------------------------------------------------------------------------------
 160 @ TEST3
 161 @-------------------------------------------------------------------------------
 162         .section        .TEST3
 163         .globl  func3a
 164         .align  2
 165         .type   func3a,%function
 166         .fnstart
 167 func3a:
 168         .save   {r4, r14}
 169         push    {r4, r14}
 170         pop     {r4, r14}
 171         bx      lr
 172         .personality __gxx_personality_v0
 173         .handlerdata
 174         .fnend
 175
 176         .globl  func3b
 177         .align  2
 178         .type   func3b,%function
 179         .fnstart
 180 func3b:
 181         .save   {r4, r5, r14}
 182         push    {r4, r5, r14}
 183         pop     {r4, r5, r14}
 184         bx      lr
 185         .personality __gxx_personality_v0
 186         .handlerdata
 187         .fnend
 188
 189         .globl  func3c
 190         .align  2
 191         .type   func3c,%function
 192         .fnstart
 193 func3c:
 194         .save   {r4, r5, r6, r7, r8, r9, r10, r11, r14}
 195         push    {r4, r5, r6, r7, r8, r9, r10, r11, r14}
 196         pop     {r4, r5, r6, r7, r8, r9, r10, r11, r14}
 197         bx      lr
 198         .personality __gxx_personality_v0
 199         .handlerdata
 200         .fnend
 201
 202 @-------------------------------------------------------------------------------
 203 @ The assembler should emit 0xA8 unwind opcode.
 204 @-------------------------------------------------------------------------------
 205 @ CHECK: Section {
 206 @ CHECK:   Name: .ARM.extab.TEST3
 207 @ CHECK:   SectionData (
 208 @ CHECK:     0000: 00000000 B0B0A800 00000000 B0B0A900  |................|
 209 @ CHECK:     0010: 00000000 B0B0AF00                    |........|
 210 @ CHECK:   )
 211 @ CHECK: }
 212
 213
 214
 215 @-------------------------------------------------------------------------------
 216 @ TEST4
 217 @-------------------------------------------------------------------------------
 218         .section        .TEST4
 219         .globl  func4a
 220         .align  2
 221         .type   func4a,%function
 222         .fnstart
 223 func4a:
 224         .save   {r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
 225         push    {r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
 226         pop     {r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
 227         bx      lr
 228         .personality __gxx_personality_v0
 229         .handlerdata
 230         .fnend
 231
 232         .globl  func4b
 233         .align  2
 234         .type   func4b,%function
 235         .fnstart
 236 func4b:
 237         @ Note: r7 is missing intentionally.
 238         .save   {r4, r5, r6, r8, r9, r10, r11}
 239         push    {r4, r5, r6, r8, r9, r10, r11}
 240         pop     {r4, r5, r6, r8, r9, r10, r11}
 241         bx      lr
 242         .personality __gxx_personality_v0
 243         .handlerdata
 244         .fnend
 245
 246         .globl  func4c
 247         .align  2
 248         .type   func4c,%function
 249         .fnstart
 250 func4c:
 251         @ Note: r7 is missing intentionally.
 252         .save   {r4, r5, r6, r8, r9, r10, r11, r14}
 253         push    {r4, r5, r6, r8, r9, r10, r11, r14}
 254         pop     {r4, r5, r6, r8, r9, r10, r11, r14}
 255         bx      lr
 256         .personality __gxx_personality_v0
 257         .handlerdata
 258         .fnend
 259
 260         .globl  func4d
 261         .align  2
 262         .type   func4d,%function
 263         .fnstart
 264 func4d:
 265         @ Note: The register list is not start with r4.
 266         .save   {r5, r6, r7}
 267         push    {r5, r6, r7}
 268         pop     {r5, r6, r7}
 269         bx      lr
 270         .personality __gxx_personality_v0
 271         .handlerdata
 272         .fnend
 273
 274         .globl  func4e
 275         .align  2
 276         .type   func4e,%function
 277         .fnstart
 278 func4e:
 279         @ Note: The register list is not start with r4.
 280         .save   {r5, r6, r7, r14}
 281         push    {r5, r6, r7, r14}
 282         pop     {r5, r6, r7, r14}
 283         bx      lr
 284         .personality __gxx_personality_v0
 285         .handlerdata
 286         .fnend
 287
 288 @-------------------------------------------------------------------------------
 289 @ The assembler should emit 0x8000 unwind opcode.
 290 @-------------------------------------------------------------------------------
 291 @ CHECK: Section {
 292 @ CHECK:   Name: .ARM.extab.TEST4
 293 @ CHECK:   SectionData (
 294 @ CHECK:     0000: 00000000 B0FF8500 00000000 B0F78000  |................|
 295 @ CHECK:     0010: 00000000 B0F78400 00000000 B00E8000  |................|
 296 @ CHECK:     0020: 00000000 B00E8400                    |........|
 297 @ CHECK:   )
 298 @ CHECK: }
 299
 300
 301
 302 @-------------------------------------------------------------------------------
 303 @ TEST5
 304 @-------------------------------------------------------------------------------
 305         .section        .TEST5
 306         .globl  func5a
 307         .align  2
 308         .type   func5a,%function
 309         .fnstart
 310 func5a:
 311         .save   {r0, r1, r2, r3, r4, r5, r6}
 312         push    {r0, r1, r2, r3, r4, r5, r6}
 313         pop     {r0, r1, r2, r3, r4, r5, r6}
 314         bx      lr
 315         .personality __gxx_personality_v0
 316         .handlerdata
 317         .fnend
 318
 319         .globl  func5b
 320         .align  2
 321         .type   func5b,%function
 322         .fnstart
 323 func5b:
 324         .save   {r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
 325         push    {r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
 326         pop     {r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
 327         bx      lr
 328         .personality __gxx_personality_v0
 329         .handlerdata
 330         .fnend
 331
 332 @-------------------------------------------------------------------------------
 333 @ Check the order of unwind opcode to pop registers.
 334 @ 0xB10F "pop {r0-r3}" should be emitted before 0xA2 "pop {r4-r6}".
 335 @ 0xB10F "pop {r0-r3}" should be emitted before 0x85FF "pop {r4-r12, r14}".
 336 @-------------------------------------------------------------------------------
 337 @ CHECK: Section {
 338 @ CHECK:   Name: .ARM.extab.TEST5
 339 @ CHECK:   SectionData (
 340 @ CHECK:     0000: 00000000 A20FB100 00000000 850FB101  |................|
 341 @ CHECK:     0010: B0B0B0FF                             |....|
 342 @ CHECK:   )
 343 @ CHECK: }