llvm/lib/Target/ARM/A15SDOptimizer.cpp

   1 //=== A15SDOptimizerPass.cpp - Optimize DPR and SPR register accesses on A15==//
   2 //
   3 // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
   4 // See https://llvm.org/LICENSE.txt for license information.
   5 // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
   6 //
   7 //===----------------------------------------------------------------------===//
   8 //
   9 // The Cortex-A15 processor employs a tracking scheme in its register renaming
  10 // in order to process each instruction's micro-ops speculatively and
  11 // out-of-order with appropriate forwarding. The ARM architecture allows VFP
  12 // instructions to read and write 32-bit S-registers.  Each S-register
  13 // corresponds to one half (upper or lower) of an overlaid 64-bit D-register.
  14 //
  15 // There are several instruction patterns which can be used to provide this
  16 // capability which can provide higher performance than other, potentially more
  17 // direct patterns, specifically around when one micro-op reads a D-register
  18 // operand that has recently been written as one or more S-register results.
  19 //
  20 // This file defines a pre-regalloc pass which looks for SPR producers which
  21 // are going to be used by a DPR (or QPR) consumers and creates the more
  22 // optimized access pattern.
  23 //
  24 //===----------------------------------------------------------------------===//
  25
  26 #include "ARM.h"
  27 #include "ARMBaseInstrInfo.h"
  28 #include "ARMBaseRegisterInfo.h"
  29 #include "ARMSubtarget.h"
  30 #include "llvm/ADT/Statistic.h"
  31 #include "llvm/CodeGen/MachineFunction.h"
  32 #include "llvm/CodeGen/MachineFunctionPass.h"
  33 #include "llvm/CodeGen/MachineInstr.h"
  34 #include "llvm/CodeGen/MachineInstrBuilder.h"
  35 #include "llvm/CodeGen/MachineRegisterInfo.h"
  36 #include "llvm/CodeGen/TargetRegisterInfo.h"
  37 #include "llvm/CodeGen/TargetSubtargetInfo.h"
  38 #include "llvm/Support/Debug.h"
  39 #include "llvm/Support/raw_ostream.h"
  40 #include <map>
  41 #include <set>
  42
  43 using namespace llvm;
  44
  45 #define DEBUG_TYPE "a15-sd-optimizer"
  46
  47 namespace {
  48   struct A15SDOptimizer : public MachineFunctionPass {
  49     static char ID;
  50     A15SDOptimizer() : MachineFunctionPass(ID) {}
  51
  52     bool runOnMachineFunction(MachineFunction &Fn) override;
  53
  54     StringRef getPassName() const override { return "ARM A15 S->D optimizer"; }
  55
  56   private:
  57     const ARMBaseInstrInfo *TII;
  58     const TargetRegisterInfo *TRI;
  59     MachineRegisterInfo *MRI;
  60
  61     bool runOnInstruction(MachineInstr *MI);
  62
  63     //
  64     // Instruction builder helpers
  65     //
  66     unsigned createDupLane(MachineBasicBlock &MBB,
  67                            MachineBasicBlock::iterator InsertBefore,
  68                            const DebugLoc &DL, unsigned Reg, unsigned Lane,
  69                            bool QPR = false);
  70
  71     unsigned createExtractSubreg(MachineBasicBlock &MBB,
  72                                  MachineBasicBlock::iterator InsertBefore,
  73                                  const DebugLoc &DL, unsigned DReg,
  74                                  unsigned Lane, const TargetRegisterClass *TRC);
  75
  76     unsigned createVExt(MachineBasicBlock &MBB,
  77                         MachineBasicBlock::iterator InsertBefore,
  78                         const DebugLoc &DL, unsigned Ssub0, unsigned Ssub1);
  79
  80     unsigned createRegSequence(MachineBasicBlock &MBB,
  81                                MachineBasicBlock::iterator InsertBefore,
  82                                const DebugLoc &DL, unsigned Reg1,
  83                                unsigned Reg2);
  84
  85     unsigned createInsertSubreg(MachineBasicBlock &MBB,
  86                                 MachineBasicBlock::iterator InsertBefore,
  87                                 const DebugLoc &DL, unsigned DReg,
  88                                 unsigned Lane, unsigned ToInsert);
  89
  90     unsigned createImplicitDef(MachineBasicBlock &MBB,
  91                                MachineBasicBlock::iterator InsertBefore,
  92                                const DebugLoc &DL);
  93
  94     //
  95     // Various property checkers
  96     //
  97     bool usesRegClass(MachineOperand &MO, const TargetRegisterClass *TRC);
  98     bool hasPartialWrite(MachineInstr *MI);
  99     SmallVector<unsigned, 8> getReadDPRs(MachineInstr *MI);
 100     unsigned getDPRLaneFromSPR(unsigned SReg);
 101
 102     //
 103     // Methods used for getting the definitions of partial registers
 104     //
 105
 106     MachineInstr *elideCopies(MachineInstr *MI);
 107     void elideCopiesAndPHIs(MachineInstr *MI,
 108                             SmallVectorImpl<MachineInstr*> &Outs);
 109
 110     //
 111     // Pattern optimization methods
 112     //
 113     unsigned optimizeAllLanesPattern(MachineInstr *MI, unsigned Reg);
 114     unsigned optimizeSDPattern(MachineInstr *MI);
 115     unsigned getPrefSPRLane(unsigned SReg);
 116
 117     //
 118     // Sanitizing method - used to make sure if don't leave dead code around.
 119     //
 120     void eraseInstrWithNoUses(MachineInstr *MI);
 121
 122     //
 123     // A map used to track the changes done by this pass.
 124     //
 125     std::map<MachineInstr*, unsigned> Replacements;
 126     std::set<MachineInstr *> DeadInstr;
 127   };
 128   char A15SDOptimizer::ID = 0;
 129 } // end anonymous namespace
 130
 131 // Returns true if this is a use of a SPR register.
 132 bool A15SDOptimizer::usesRegClass(MachineOperand &MO,
 133                                   const TargetRegisterClass *TRC) {
 134   if (!MO.isReg())
 135     return false;
 136   Register Reg = MO.getReg();
 137
 138   if (Register::isVirtualRegister(Reg))
 139     return MRI->getRegClass(Reg)->hasSuperClassEq(TRC);
 140   else
 141     return TRC->contains(Reg);
 142 }
 143
 144 unsigned A15SDOptimizer::getDPRLaneFromSPR(unsigned SReg) {
 145   unsigned DReg = TRI->getMatchingSuperReg(SReg, ARM::ssub_1,
 146                                            &ARM::DPRRegClass);
 147   if (DReg != ARM::NoRegister) return ARM::ssub_1;
 148   return ARM::ssub_0;
 149 }
 150
 151 // Get the subreg type that is most likely to be coalesced
 152 // for an SPR register that will be used in VDUP32d pseudo.
 153 unsigned A15SDOptimizer::getPrefSPRLane(unsigned SReg) {
 154   if (!Register::isVirtualRegister(SReg))
 155     return getDPRLaneFromSPR(SReg);
 156
 157   MachineInstr *MI = MRI->getVRegDef(SReg);
 158   if (!MI) return ARM::ssub_0;
 159   MachineOperand *MO = MI->findRegisterDefOperand(SReg);
 160   if (!MO) return ARM::ssub_0;
 161   assert(MO->isReg() && "Non-register operand found!");
 162
 163   if (MI->isCopy() && usesRegClass(MI->getOperand(1),
 164                                     &ARM::SPRRegClass)) {
 165     SReg = MI->getOperand(1).getReg();
 166   }
 167
 168   if (Register::isVirtualRegister(SReg)) {
 169     if (MO->getSubReg() == ARM::ssub_1) return ARM::ssub_1;
 170     return ARM::ssub_0;
 171   }
 172   return getDPRLaneFromSPR(SReg);
 173 }
 174
 175 // MI is known to be dead. Figure out what instructions
 176 // are also made dead by this and mark them for removal.
 177 void A15SDOptimizer::eraseInstrWithNoUses(MachineInstr *MI) {
 178   SmallVector<MachineInstr *, 8> Front;
 179   DeadInstr.insert(MI);
 180
 181   LLVM_DEBUG(dbgs() << "Deleting base instruction " << *MI << "\n");
 182   Front.push_back(MI);
 183
 184   while (Front.size() != 0) {
 185     MI = Front.back();
 186     Front.pop_back();
 187
 188     // MI is already known to be dead. We need to see
 189     // if other instructions can also be removed.
 190     for (MachineOperand &MO : MI->operands()) {
 191       if ((!MO.isReg()) || (!MO.isUse()))
 192         continue;
 193       Register Reg = MO.getReg();
 194       if (!Register::isVirtualRegister(Reg))
 195         continue;
 196       MachineOperand *Op = MI->findRegisterDefOperand(Reg);
 197
 198       if (!Op)
 199         continue;
 200
 201       MachineInstr *Def = Op->getParent();
 202
 203       // We don't need to do anything if we have already marked
 204       // this instruction as being dead.
 205       if (DeadInstr.find(Def) != DeadInstr.end())
 206         continue;
 207
 208       // Check if all the uses of this instruction are marked as
 209       // dead. If so, we can also mark this instruction as being
 210       // dead.
 211       bool IsDead = true;
 212       for (MachineOperand &MODef : Def->operands()) {
 213         if ((!MODef.isReg()) || (!MODef.isDef()))
 214           continue;
 215         Register DefReg = MODef.getReg();
 216         if (!Register::isVirtualRegister(DefReg)) {
 217           IsDead = false;
 218           break;
 219         }
 220         for (MachineInstr &Use : MRI->use_instructions(Reg)) {
 221           // We don't care about self references.
 222           if (&Use == Def)
 223             continue;
 224           if (DeadInstr.find(&Use) == DeadInstr.end()) {
 225             IsDead = false;
 226             break;
 227           }
 228         }
 229       }
 230
 231       if (!IsDead) continue;
 232
 233       LLVM_DEBUG(dbgs() << "Deleting instruction " << *Def << "\n");
 234       DeadInstr.insert(Def);
 235     }
 236   }
 237 }
 238
 239 // Creates the more optimized patterns and generally does all the code
 240 // transformations in this pass.
 241 unsigned A15SDOptimizer::optimizeSDPattern(MachineInstr *MI) {
 242   if (MI->isCopy()) {
 243     return optimizeAllLanesPattern(MI, MI->getOperand(1).getReg());
 244   }
 245
 246   if (MI->isInsertSubreg()) {
 247     Register DPRReg = MI->getOperand(1).getReg();
 248     Register SPRReg = MI->getOperand(2).getReg();
 249
 250     if (Register::isVirtualRegister(DPRReg) && Register::isVirtualRegister(SPRReg)) {
 251       MachineInstr *DPRMI = MRI->getVRegDef(MI->getOperand(1).getReg());
 252       MachineInstr *SPRMI = MRI->getVRegDef(MI->getOperand(2).getReg());
 253
 254       if (DPRMI && SPRMI) {
 255         // See if the first operand of this insert_subreg is IMPLICIT_DEF
 256         MachineInstr *ECDef = elideCopies(DPRMI);
 257         if (ECDef && ECDef->isImplicitDef()) {
 258           // Another corner case - if we're inserting something that is purely
 259           // a subreg copy of a DPR, just use that DPR.
 260
 261           MachineInstr *EC = elideCopies(SPRMI);
 262           // Is it a subreg copy of ssub_0?
 263           if (EC && EC->isCopy() &&
 264               EC->getOperand(1).getSubReg() == ARM::ssub_0) {
 265             LLVM_DEBUG(dbgs() << "Found a subreg copy: " << *SPRMI);
 266
 267             // Find the thing we're subreg copying out of - is it of the same
 268             // regclass as DPRMI? (i.e. a DPR or QPR).
 269             Register FullReg = SPRMI->getOperand(1).getReg();
 270             const TargetRegisterClass *TRC =
 271               MRI->getRegClass(MI->getOperand(1).getReg());
 272             if (TRC->hasSuperClassEq(MRI->getRegClass(FullReg))) {
 273               LLVM_DEBUG(dbgs() << "Subreg copy is compatible - returning ");
 274               LLVM_DEBUG(dbgs() << printReg(FullReg) << "\n");
 275               eraseInstrWithNoUses(MI);
 276               return FullReg;
 277             }
 278           }
 279
 280           return optimizeAllLanesPattern(MI, MI->getOperand(2).getReg());
 281         }
 282       }
 283     }
 284     return optimizeAllLanesPattern(MI, MI->getOperand(0).getReg());
 285   }
 286
 287   if (MI->isRegSequence() && usesRegClass(MI->getOperand(1),
 288                                           &ARM::SPRRegClass)) {
 289     // See if all bar one of the operands are IMPLICIT_DEF and insert the
 290     // optimizer pattern accordingly.
 291     unsigned NumImplicit = 0, NumTotal = 0;
 292     unsigned NonImplicitReg = ~0U;
 293
 294     for (unsigned I = 1; I < MI->getNumExplicitOperands(); ++I) {
 295       if (!MI->getOperand(I).isReg())
 296         continue;
 297       ++NumTotal;
 298       Register OpReg = MI->getOperand(I).getReg();
 299
 300       if (!Register::isVirtualRegister(OpReg))
 301         break;
 302
 303       MachineInstr *Def = MRI->getVRegDef(OpReg);
 304       if (!Def)
 305         break;
 306       if (Def->isImplicitDef())
 307         ++NumImplicit;
 308       else
 309         NonImplicitReg = MI->getOperand(I).getReg();
 310     }
 311
 312     if (NumImplicit == NumTotal - 1)
 313       return optimizeAllLanesPattern(MI, NonImplicitReg);
 314     else
 315       return optimizeAllLanesPattern(MI, MI->getOperand(0).getReg());
 316   }
 317
 318   llvm_unreachable("Unhandled update pattern!");
 319 }
 320
 321 // Return true if this MachineInstr inserts a scalar (SPR) value into
 322 // a D or Q register.
 323 bool A15SDOptimizer::hasPartialWrite(MachineInstr *MI) {
 324   // The only way we can do a partial register update is through a COPY,
 325   // INSERT_SUBREG or REG_SEQUENCE.
 326   if (MI->isCopy() && usesRegClass(MI->getOperand(1), &ARM::SPRRegClass))
 327     return true;
 328
 329   if (MI->isInsertSubreg() && usesRegClass(MI->getOperand(2),
 330                                            &ARM::SPRRegClass))
 331     return true;
 332
 333   if (MI->isRegSequence() && usesRegClass(MI->getOperand(1), &ARM::SPRRegClass))
 334     return true;
 335
 336   return false;
 337 }
 338
 339 // Looks through full copies to get the instruction that defines the input
 340 // operand for MI.
 341 MachineInstr *A15SDOptimizer::elideCopies(MachineInstr *MI) {
 342   if (!MI->isFullCopy())
 343     return MI;
 344   if (!Register::isVirtualRegister(MI->getOperand(1).getReg()))
 345     return nullptr;
 346   MachineInstr *Def = MRI->getVRegDef(MI->getOperand(1).getReg());
 347   if (!Def)
 348     return nullptr;
 349   return elideCopies(Def);
 350 }
 351
 352 // Look through full copies and PHIs to get the set of non-copy MachineInstrs
 353 // that can produce MI.
 354 void A15SDOptimizer::elideCopiesAndPHIs(MachineInstr *MI,
 355                                         SmallVectorImpl<MachineInstr*> &Outs) {
 356    // Looking through PHIs may create loops so we need to track what
 357    // instructions we have visited before.
 358    std::set<MachineInstr *> Reached;
 359    SmallVector<MachineInstr *, 8> Front;
 360    Front.push_back(MI);
 361    while (Front.size() != 0) {
 362      MI = Front.pop_back_val();
 363
 364      // If we have already explored this MachineInstr, ignore it.
 365      if (Reached.find(MI) != Reached.end())
 366        continue;
 367      Reached.insert(MI);
 368      if (MI->isPHI()) {
 369        for (unsigned I = 1, E = MI->getNumOperands(); I != E; I += 2) {
 370          Register Reg = MI->getOperand(I).getReg();
 371          if (!Register::isVirtualRegister(Reg)) {
 372            continue;
 373          }
 374          MachineInstr *NewMI = MRI->getVRegDef(Reg);
 375          if (!NewMI)
 376            continue;
 377          Front.push_back(NewMI);
 378        }
 379      } else if (MI->isFullCopy()) {
 380        if (!Register::isVirtualRegister(MI->getOperand(1).getReg()))
 381          continue;
 382        MachineInstr *NewMI = MRI->getVRegDef(MI->getOperand(1).getReg());
 383        if (!NewMI)
 384          continue;
 385        Front.push_back(NewMI);
 386      } else {
 387        LLVM_DEBUG(dbgs() << "Found partial copy" << *MI << "\n");
 388        Outs.push_back(MI);
 389      }
 390    }
 391 }
 392
 393 // Return the DPR virtual registers that are read by this machine instruction
 394 // (if any).
 395 SmallVector<unsigned, 8> A15SDOptimizer::getReadDPRs(MachineInstr *MI) {
 396   if (MI->isCopyLike() || MI->isInsertSubreg() || MI->isRegSequence() ||
 397       MI->isKill())
 398     return SmallVector<unsigned, 8>();
 399
 400   SmallVector<unsigned, 8> Defs;
 401   for (MachineOperand &MO : MI->operands()) {
 402     if (!MO.isReg() || !MO.isUse())
 403       continue;
 404     if (!usesRegClass(MO, &ARM::DPRRegClass) &&
 405         !usesRegClass(MO, &ARM::QPRRegClass) &&
 406         !usesRegClass(MO, &ARM::DPairRegClass)) // Treat DPair as QPR
 407       continue;
 408
 409     Defs.push_back(MO.getReg());
 410   }
 411   return Defs;
 412 }
 413
 414 // Creates a DPR register from an SPR one by using a VDUP.
 415 unsigned A15SDOptimizer::createDupLane(MachineBasicBlock &MBB,
 416                                        MachineBasicBlock::iterator InsertBefore,
 417                                        const DebugLoc &DL, unsigned Reg,
 418                                        unsigned Lane, bool QPR) {
 419   Register Out =
 420       MRI->createVirtualRegister(QPR ? &ARM::QPRRegClass : &ARM::DPRRegClass);
 421   BuildMI(MBB, InsertBefore, DL,
 422           TII->get(QPR ? ARM::VDUPLN32q : ARM::VDUPLN32d), Out)
 423       .addReg(Reg)
 424       .addImm(Lane)
 425       .add(predOps(ARMCC::AL));
 426
 427   return Out;
 428 }
 429
 430 // Creates a SPR register from a DPR by copying the value in lane 0.
 431 unsigned A15SDOptimizer::createExtractSubreg(
 432     MachineBasicBlock &MBB, MachineBasicBlock::iterator InsertBefore,
 433     const DebugLoc &DL, unsigned DReg, unsigned Lane,
 434     const TargetRegisterClass *TRC) {
 435   Register Out = MRI->createVirtualRegister(TRC);
 436   BuildMI(MBB,
 437           InsertBefore,
 438           DL,
 439           TII->get(TargetOpcode::COPY), Out)
 440     .addReg(DReg, 0, Lane);
 441
 442   return Out;
 443 }
 444
 445 // Takes two SPR registers and creates a DPR by using a REG_SEQUENCE.
 446 unsigned A15SDOptimizer::createRegSequence(
 447     MachineBasicBlock &MBB, MachineBasicBlock::iterator InsertBefore,
 448     const DebugLoc &DL, unsigned Reg1, unsigned Reg2) {
 449   Register Out = MRI->createVirtualRegister(&ARM::QPRRegClass);
 450   BuildMI(MBB,
 451           InsertBefore,
 452           DL,
 453           TII->get(TargetOpcode::REG_SEQUENCE), Out)
 454     .addReg(Reg1)
 455     .addImm(ARM::dsub_0)
 456     .addReg(Reg2)
 457     .addImm(ARM::dsub_1);
 458   return Out;
 459 }
 460
 461 // Takes two DPR registers that have previously been VDUPed (Ssub0 and Ssub1)
 462 // and merges them into one DPR register.
 463 unsigned A15SDOptimizer::createVExt(MachineBasicBlock &MBB,
 464                                     MachineBasicBlock::iterator InsertBefore,
 465                                     const DebugLoc &DL, unsigned Ssub0,
 466                                     unsigned Ssub1) {
 467   Register Out = MRI->createVirtualRegister(&ARM::DPRRegClass);
 468   BuildMI(MBB, InsertBefore, DL, TII->get(ARM::VEXTd32), Out)
 469       .addReg(Ssub0)
 470       .addReg(Ssub1)
 471       .addImm(1)
 472       .add(predOps(ARMCC::AL));
 473   return Out;
 474 }
 475
 476 unsigned A15SDOptimizer::createInsertSubreg(
 477     MachineBasicBlock &MBB, MachineBasicBlock::iterator InsertBefore,
 478     const DebugLoc &DL, unsigned DReg, unsigned Lane, unsigned ToInsert) {
 479   Register Out = MRI->createVirtualRegister(&ARM::DPR_VFP2RegClass);
 480   BuildMI(MBB,
 481           InsertBefore,
 482           DL,
 483           TII->get(TargetOpcode::INSERT_SUBREG), Out)
 484     .addReg(DReg)
 485     .addReg(ToInsert)
 486     .addImm(Lane);
 487
 488   return Out;
 489 }
 490
 491 unsigned
 492 A15SDOptimizer::createImplicitDef(MachineBasicBlock &MBB,
 493                                   MachineBasicBlock::iterator InsertBefore,
 494                                   const DebugLoc &DL) {
 495   Register Out = MRI->createVirtualRegister(&ARM::DPRRegClass);
 496   BuildMI(MBB,
 497           InsertBefore,
 498           DL,
 499           TII->get(TargetOpcode::IMPLICIT_DEF), Out);
 500   return Out;
 501 }
 502
 503 // This function inserts instructions in order to optimize interactions between
 504 // SPR registers and DPR/QPR registers. It does so by performing VDUPs on all
 505 // lanes, and the using VEXT instructions to recompose the result.
 506 unsigned
 507 A15SDOptimizer::optimizeAllLanesPattern(MachineInstr *MI, unsigned Reg) {
 508   MachineBasicBlock::iterator InsertPt(MI);
 509   DebugLoc DL = MI->getDebugLoc();
 510   MachineBasicBlock &MBB = *MI->getParent();
 511   InsertPt++;
 512   unsigned Out;
 513
 514   // DPair has the same length as QPR and also has two DPRs as subreg.
 515   // Treat DPair as QPR.
 516   if (MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::QPRRegClass) ||
 517       MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::DPairRegClass)) {
 518     unsigned DSub0 = createExtractSubreg(MBB, InsertPt, DL, Reg,
 519                                          ARM::dsub_0, &ARM::DPRRegClass);
 520     unsigned DSub1 = createExtractSubreg(MBB, InsertPt, DL, Reg,
 521                                          ARM::dsub_1, &ARM::DPRRegClass);
 522
 523     unsigned Out1 = createDupLane(MBB, InsertPt, DL, DSub0, 0);
 524     unsigned Out2 = createDupLane(MBB, InsertPt, DL, DSub0, 1);
 525     Out = createVExt(MBB, InsertPt, DL, Out1, Out2);
 526
 527     unsigned Out3 = createDupLane(MBB, InsertPt, DL, DSub1, 0);
 528     unsigned Out4 = createDupLane(MBB, InsertPt, DL, DSub1, 1);
 529     Out2 = createVExt(MBB, InsertPt, DL, Out3, Out4);
 530
 531     Out = createRegSequence(MBB, InsertPt, DL, Out, Out2);
 532
 533   } else if (MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::DPRRegClass)) {
 534     unsigned Out1 = createDupLane(MBB, InsertPt, DL, Reg, 0);
 535     unsigned Out2 = createDupLane(MBB, InsertPt, DL, Reg, 1);
 536     Out = createVExt(MBB, InsertPt, DL, Out1, Out2);
 537
 538   } else {
 539     assert(MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::SPRRegClass) &&
 540            "Found unexpected regclass!");
 541
 542     unsigned PrefLane = getPrefSPRLane(Reg);
 543     unsigned Lane;
 544     switch (PrefLane) {
 545       case ARM::ssub_0: Lane = 0; break;
 546       case ARM::ssub_1: Lane = 1; break;
 547       default: llvm_unreachable("Unknown preferred lane!");
 548     }
 549
 550     // Treat DPair as QPR
 551     bool UsesQPR = usesRegClass(MI->getOperand(0), &ARM::QPRRegClass) ||
 552                    usesRegClass(MI->getOperand(0), &ARM::DPairRegClass);
 553
 554     Out = createImplicitDef(MBB, InsertPt, DL);
 555     Out = createInsertSubreg(MBB, InsertPt, DL, Out, PrefLane, Reg);
 556     Out = createDupLane(MBB, InsertPt, DL, Out, Lane, UsesQPR);
 557     eraseInstrWithNoUses(MI);
 558   }
 559   return Out;
 560 }
 561
 562 bool A15SDOptimizer::runOnInstruction(MachineInstr *MI) {
 563   // We look for instructions that write S registers that are then read as
 564   // D/Q registers. These can only be caused by COPY, INSERT_SUBREG and
 565   // REG_SEQUENCE pseudos that insert an SPR value into a DPR register or
 566   // merge two SPR values to form a DPR register.  In order avoid false
 567   // positives we make sure that there is an SPR producer so we look past
 568   // COPY and PHI nodes to find it.
 569   //
 570   // The best code pattern for when an SPR producer is going to be used by a
 571   // DPR or QPR consumer depends on whether the other lanes of the
 572   // corresponding DPR/QPR are currently defined.
 573   //
 574   // We can handle these efficiently, depending on the type of
 575   // pseudo-instruction that is producing the pattern
 576   //
 577   //   * COPY:          * VDUP all lanes and merge the results together
 578   //                      using VEXTs.
 579   //
 580   //   * INSERT_SUBREG: * If the SPR value was originally in another DPR/QPR
 581   //                      lane, and the other lane(s) of the DPR/QPR register
 582   //                      that we are inserting in are undefined, use the
 583   //                      original DPR/QPR value.
 584   //                    * Otherwise, fall back on the same stategy as COPY.
 585   //
 586   //   * REG_SEQUENCE:  * If all except one of the input operands are
 587   //                      IMPLICIT_DEFs, insert the VDUP pattern for just the
 588   //                      defined input operand
 589   //                    * Otherwise, fall back on the same stategy as COPY.
 590   //
 591
 592   // First, get all the reads of D-registers done by this instruction.
 593   SmallVector<unsigned, 8> Defs = getReadDPRs(MI);
 594   bool Modified = false;
 595
 596   for (SmallVectorImpl<unsigned>::iterator I = Defs.begin(), E = Defs.end();
 597      I != E; ++I) {
 598     // Follow the def-use chain for this DPR through COPYs, and also through
 599     // PHIs (which are essentially multi-way COPYs). It is because of PHIs that
 600     // we can end up with multiple defs of this DPR.
 601
 602     SmallVector<MachineInstr *, 8> DefSrcs;
 603     if (!Register::isVirtualRegister(*I))
 604       continue;
 605     MachineInstr *Def = MRI->getVRegDef(*I);
 606     if (!Def)
 607       continue;
 608
 609     elideCopiesAndPHIs(Def, DefSrcs);
 610
 611     for (MachineInstr *MI : DefSrcs) {
 612       // If we've already analyzed and replaced this operand, don't do
 613       // anything.
 614       if (Replacements.find(MI) != Replacements.end())
 615         continue;
 616
 617       // Now, work out if the instruction causes a SPR->DPR dependency.
 618       if (!hasPartialWrite(MI))
 619         continue;
 620
 621       // Collect all the uses of this MI's DPR def for updating later.
 622       SmallVector<MachineOperand*, 8> Uses;
 623       Register DPRDefReg = MI->getOperand(0).getReg();
 624       for (MachineRegisterInfo::use_iterator I = MRI->use_begin(DPRDefReg),
 625              E = MRI->use_end(); I != E; ++I)
 626         Uses.push_back(&*I);
 627
 628       // We can optimize this.
 629       unsigned NewReg = optimizeSDPattern(MI);
 630
 631       if (NewReg != 0) {
 632         Modified = true;
 633         for (SmallVectorImpl<MachineOperand *>::const_iterator I = Uses.begin(),
 634                E = Uses.end(); I != E; ++I) {
 635           // Make sure to constrain the register class of the new register to
 636           // match what we're replacing. Otherwise we can optimize a DPR_VFP2
 637           // reference into a plain DPR, and that will end poorly. NewReg is
 638           // always virtual here, so there will always be a matching subclass
 639           // to find.
 640           MRI->constrainRegClass(NewReg, MRI->getRegClass((*I)->getReg()));
 641
 642           LLVM_DEBUG(dbgs() << "Replacing operand " << **I << " with "
 643                             << printReg(NewReg) << "\n");
 644           (*I)->substVirtReg(NewReg, 0, *TRI);
 645         }
 646       }
 647       Replacements[MI] = NewReg;
 648     }
 649   }
 650   return Modified;
 651 }
 652
 653 bool A15SDOptimizer::runOnMachineFunction(MachineFunction &Fn) {
 654   if (skipFunction(Fn.getFunction()))
 655     return false;
 656
 657   const ARMSubtarget &STI = Fn.getSubtarget<ARMSubtarget>();
 658   // Since the A15SDOptimizer pass can insert VDUP instructions, it can only be
 659   // enabled when NEON is available.
 660   if (!(STI.useSplatVFPToNeon() && STI.hasNEON()))
 661     return false;
 662
 663   TII = STI.getInstrInfo();
 664   TRI = STI.getRegisterInfo();
 665   MRI = &Fn.getRegInfo();
 666   bool Modified = false;
 667
 668   LLVM_DEBUG(dbgs() << "Running on function " << Fn.getName() << "\n");
 669
 670   DeadInstr.clear();
 671   Replacements.clear();
 672
 673   for (MachineBasicBlock &MBB : Fn) {
 674     for (MachineInstr &MI : MBB) {
 675       Modified |= runOnInstruction(&MI);
 676     }
 677   }
 678
 679   for (MachineInstr *MI : DeadInstr) {
 680     MI->eraseFromParent();
 681   }
 682
 683   return Modified;
 684 }
 685
 686 FunctionPass *llvm::createA15SDOptimizerPass() {
 687   return new A15SDOptimizer();
 688 }