i386/linux/linux-2.3.21/drivers/char/dz.h

   1 /*
   2  * dz.h: Serial port driver for DECStations equiped
   3  *       with the DZ chipset.
   4  *
   5  * Copyright (C) 1998 Olivier A. D. Lebaillif
   6  *
   7  * Email: olivier.lebaillif@ifrsys.com
   8  *
   9  */
  10 #ifndef DZ_SERIAL_H
  11 #define DZ_SERIAL_H
  12
  13 /*
  14  * Definitions for the Control and Status Received.
  15  */
  16 #define DZ_TRDY        0x8000                 /* Transmitter empty */
  17 #define DZ_TIE         0x4000                 /* Transmitter Interrupt Enable */
  18 #define DZ_RDONE       0x0080                 /* Receiver data ready */
  19 #define DZ_RIE         0x0040                 /* Receive Interrupt Enable */
  20 #define DZ_MSE         0x0020                 /* Master Scan Enable */
  21 #define DZ_CLR         0x0010                 /* Master reset */
  22 #define DZ_MAINT       0x0008                 /* Loop Back Mode */
  23
  24 /*
  25  * Definitions for the Received buffer.
  26  */
  27 #define DZ_RBUF_MASK   0x00FF                 /* Data Mask in the Receive Buffer */
  28 #define DZ_LINE_MASK   0x0300                 /* Line Mask in the Receive Buffer */
  29 #define DZ_DVAL        0x8000                 /* Valid Data indicator */
  30 #define DZ_OERR        0x4000                 /* Overrun error indicator */
  31 #define DZ_FERR        0x2000                 /* Frame error indicator */
  32 #define DZ_PERR        0x1000                 /* Parity error indicator */
  33
  34 #define LINE(x) (x & DZ_LINE_MASK) >> 8       /* Get the line number from the input buffer */
  35 #define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK)
  36
  37 /*
  38  * Definitions for the Transmit Register.
  39  */
  40 #define DZ_LINE_KEYBOARD 0x0001
  41 #define DZ_LINE_MOUSE    0x0002
  42 #define DZ_LINE_MODEM    0x0004
  43 #define DZ_LINE_PRINTER  0x0008
  44
  45 #define DZ_MODEM_DTR     0x0400               /* DTR for the modem line (2) */
  46
  47 /*
  48  * Definitions for the Modem Status Register.
  49  */
  50 #define DZ_MODEM_DSR     0x0200               /* DSR for the modem line (2) */
  51
  52 /*
  53  * Definitions for the Transmit Data Register.
  54  */
  55 #define DZ_BRK0          0x0100               /* Break assertion for line 0 */
  56 #define DZ_BRK1          0x0200               /* Break assertion for line 1 */
  57 #define DZ_BRK2          0x0400               /* Break assertion for line 2 */
  58 #define DZ_BRK3          0x0800               /* Break assertion for line 3 */
  59
  60 /*
  61  * Definitions for the Line Parameter Register.
  62  */
  63 #define DZ_KEYBOARD      0x0000               /* line 0 = keyboard */
  64 #define DZ_MOUSE         0x0001               /* line 1 = mouse */
  65 #define DZ_MODEM         0x0002               /* line 2 = modem */
  66 #define DZ_PRINTER       0x0003               /* line 3 = printer */
  67
  68 #define DZ_CSIZE         0x0018               /* Number of bits per byte (mask) */
  69 #define DZ_CS5           0x0000               /* 5 bits per byte */
  70 #define DZ_CS6           0x0008               /* 6 bits per byte */
  71 #define DZ_CS7           0x0010               /* 7 bits per byte */
  72 #define DZ_CS8           0x0018               /* 8 bits per byte */
  73
  74 #define DZ_CSTOPB        0x0020               /* 2 stop bits instead of one */
  75
  76 #define DZ_PARENB        0x0040               /* Parity enable */
  77 #define DZ_PARODD        0x0080               /* Odd parity instead of even */
  78
  79 #define DZ_CBAUD         0x0E00               /* Baud Rate (mask) */
  80 #define DZ_B50           0x0000
  81 #define DZ_B75           0x0100
  82 #define DZ_B110          0x0200
  83 #define DZ_B134          0x0300
  84 #define DZ_B150          0x0400
  85 #define DZ_B300          0x0500
  86 #define DZ_B600          0x0600
  87 #define DZ_B1200         0x0700
  88 #define DZ_B1800         0x0800
  89 #define DZ_B2000         0x0900
  90 #define DZ_B2400         0x0A00
  91 #define DZ_B3600         0x0B00
  92 #define DZ_B4800         0x0C00
  93 #define DZ_B7200         0x0D00
  94 #define DZ_B9600         0x0E00
  95
  96 #define DZ_CREAD         0x1000               /* Enable receiver */
  97 #define DZ_RXENAB        0x1000               /* enable receive char */
  98 /*
  99  * Addresses for the DZ registers
 100  */
 101 #define DZ_CSR       0x00            /* Control and Status Register */
 102 #define DZ_RBUF      0x08            /* Receive Buffer */
 103 #define DZ_LPR       0x08            /* Line Parameters Register */
 104 #define DZ_TCR       0x10            /* Transmitter Control Register */
 105 #define DZ_MSR       0x18            /* Modem Status Register */
 106 #define DZ_TDR       0x18            /* Transmit Data Register */
 107
 108
 109 #define DZ_NB_PORT 4
 110
 111 #define DZ_XMIT_SIZE   4096                 /* buffer size */
 112 #define WAKEUP_CHARS   DZ_XMIT_SIZE/4
 113
 114 #define DZ_EVENT_WRITE_WAKEUP   0
 115
 116 #ifndef MIN
 117 #define MIN(a,b)        ((a) < (b) ? (a) : (b))
 118
 119 #define DZ_INITIALIZED       0x80000000 /* Serial port was initialized */
 120 #define DZ_CALLOUT_ACTIVE    0x40000000 /* Call out device is active */
 121 #define DZ_NORMAL_ACTIVE     0x20000000 /* Normal device is active */
 122 #define DZ_BOOT_AUTOCONF     0x10000000 /* Autoconfigure port on bootup */
 123 #define DZ_CLOSING           0x08000000 /* Serial port is closing */
 124 #define DZ_CTS_FLOW          0x04000000 /* Do CTS flow control */
 125 #define DZ_CHECK_CD          0x02000000 /* i.e., CLOCAL */
 126
 127 #define DZ_CLOSING_WAIT_INF  0
 128 #define DZ_CLOSING_WAIT_NONE 65535
 129
 130 #define DZ_SPLIT_TERMIOS   0x0008 /* Separate termios for dialin/callout */
 131 #define DZ_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
 132 #define DZ_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
 133
 134 struct dz_serial {
 135   unsigned                port;                /* base address for the port */
 136   int                     type;
 137   int                     flags;
 138   int                     baud_base;
 139   int                     blocked_open;
 140   unsigned short          close_delay;
 141   unsigned short          closing_wait;
 142   unsigned short          line;                /* port/line number */
 143   unsigned short          cflags;              /* line configuration flag */
 144   unsigned short          x_char;              /* xon/xoff character */
 145   unsigned short          read_status_mask;    /* mask for read condition */
 146   unsigned short          ignore_status_mask;  /* mask for ignore condition */
 147   unsigned long           event;               /* mask used in BH */
 148   unsigned char           *xmit_buf;           /* Transmit buffer */
 149   int                     xmit_head;           /* Position of the head */
 150   int                     xmit_tail;           /* Position of the tail */
 151   int                     xmit_cnt;            /* Count of the chars in the buffer */
 152   int                     count;               /* indicates how many times it has been opened */
 153   int                     magic;
 154
 155   struct async_icount     icount;              /* keep track of things ... */
 156   struct tty_struct       *tty;                /* tty associated */
 157   struct tq_struct        tqueue;              /* Queue for BH */
 158   struct tq_struct        tqueue_hangup;
 159   struct termios          normal_termios;
 160   struct termios          callout_termios;
 161   struct wait_queue       *open_wait;
 162   struct wait_queue       *close_wait;
 163
 164   long                    session;             /* Session of opening process */
 165   long                    pgrp;                /* pgrp of opening process */
 166
 167   unsigned char           is_console;          /* flag indicating a serial console */
 168   unsigned char           is_initialized;
 169 };
 170
 171 static struct dz_serial multi[DZ_NB_PORT];    /* Four serial lines in the DZ chip */
 172 static struct dz_serial *dz_console;
 173 static struct tty_driver serial_driver, callout_driver;
 174
 175 static struct tty_struct *serial_table[DZ_NB_PORT];
 176 static struct termios *serial_termios[DZ_NB_PORT];
 177 static struct termios *serial_termios_locked[DZ_NB_PORT];
 178
 179 static int serial_refcount;
 180
 181 /*
 182  * tmp_buf is used as a temporary buffer by serial_write.  We need to
 183  * lock it in case the copy_from_user blocks while swapping in a page,
 184  * and some other program tries to do a serial write at the same time.
 185  * Since the lock will only come under contention when the system is
 186  * swapping and available memory is low, it makes sense to share one
 187  * buffer across all the serial ports, since it significantly saves
 188  * memory if large numbers of serial ports are open.
 189  */
 190 static unsigned char *tmp_buf;
 191 static struct semaphore tmp_buf_sem = MUTEX;
 192
 193 static char *dz_name = "DECstation DZ serial driver version ";
 194 static char *dz_version = "1.02";
 195
 196 static inline unsigned short dz_in (struct dz_serial *, unsigned);
 197 static inline void dz_out (struct dz_serial *, unsigned, unsigned short);
 198
 199 static inline void dz_sched_event (struct dz_serial *, int);
 200 static inline void receive_chars (struct dz_serial *);
 201 static inline void transmit_chars (struct dz_serial *);
 202 static inline void check_modem_status (struct dz_serial *);
 203
 204 static void dz_stop (struct tty_struct *);
 205 static void dz_start (struct tty_struct *);
 206 static void dz_interrupt (int, void *, struct pt_regs *);
 207 static void do_serial_bh (void);
 208 static void do_softint (void *);
 209 static void do_serial_hangup (void *);
 210 static void change_speed (struct dz_serial *);
 211 static void dz_flush_chars (struct tty_struct *);
 212 static void dz_console_print (struct console *, const char *, unsigned int);
 213 static void dz_flush_buffer (struct tty_struct *);
 214 static void dz_throttle (struct tty_struct *);
 215 static void dz_unthrottle (struct tty_struct *);
 216 static void dz_send_xchar (struct tty_struct *, char);
 217 static void shutdown (struct dz_serial *);
 218 static void send_break (struct dz_serial *, int);
 219 static void dz_set_termios (struct tty_struct *, struct termios *);
 220 static void dz_close (struct tty_struct *, struct file *);
 221 static void dz_hangup (struct tty_struct *);
 222 static void show_serial_version (void);
 223
 224 static int dz_write (struct tty_struct *, int, const unsigned char *, int);
 225 static int dz_write_room (struct tty_struct *);
 226 static int dz_chars_in_buffer (struct tty_struct *);
 227 static int startup (struct dz_serial *);
 228 static int get_serial_info (struct dz_serial *, struct serial_struct *);
 229 static int set_serial_info (struct dz_serial *, struct serial_struct *);
 230 static int get_lsr_info (struct dz_serial *, unsigned int *);
 231 static int dz_ioctl (struct tty_struct *, struct file *, unsigned int, unsigned long);
 232 static int block_til_ready (struct tty_struct *, struct file *, struct dz_serial *);
 233 static int dz_open (struct tty_struct *, struct file *);
 234
 235 #ifdef MODULE
 236 int init_module (void)
 237 void cleanup_module (void)
 238 #endif
 239
 240 #endif
 241
 242 #endif /* DZ_SERIAL_H */