Add symbol checks to translators for MCALL, MARRAYREF, and MARRAYSET

[maxima.git] / interfaces / xmaxima / Tkmaxima / Paths.tcl

############################################################
# Paths.tcl                                                #
# Copyright (C) 1998 William F. Schelter                   #
# For distribution under GNU public License.  See COPYING. #
#                                                          #
#     Time-stamp: "2024-03-26 13:42:55 villate"            #
############################################################
#
# Attach this near the bottom of the xmaxima code to find the paths needed
# to start up the interface.

proc setMaxDir {} {
    global env maxima_priv autoconf tcl_platform

    if {$tcl_platform(platform) == "windows"} {
        # Make sure the signals thread is started
        set env(MAXIMA_SIGNALS_THREAD) "1"

        # Assume the executable is one level down from the top
        # for 5.6 this was src/ and for 5.9 its bin/
        set up [file dir [file dir [info name]]]

        if {[info exists autoconf] && \
                [info exists autoconf(prefix)] && \
                [info exists autoconf(exec_prefix)] && \
                [info exists autoconf(libdir)] && \
                [info exists autoconf(libexecdir)] && \
                [info exists autoconf(datadir)] && \
                [info exists autoconf(infodir)] && \
                [info exists autoconf(version)] && \
                [info exists autoconf(package)] && \
                [file isdir  $autoconf(datadir)] && \
                [file isdir \
                     [file join $autoconf(datadir) \
                          $autoconf(package) $autoconf(version)]]} {
            # Assume it's CYGWIN or  MSYS in /usr/local
        } elseif {[file isdir $up/lib] && \
                      [file isdir $up/bin] && \
                      [file isdir $up/libexec] && \
                      [file isdir $up/info] && \
                      [file isdir $up/share]} {
            set autoconf(prefix) $up
            set env(MAXIMA_PREFIX) $up
            set autoconf(exec_prefix) $up
            set autoconf(libdir) "$up/lib"
            set autoconf(libexecdir) "$up/libexec"
            set autoconf(datadir) "$up/share"
            set autoconf(infodir) "$up/info"
            # These two should be valid
            # set autoconf(package) "maxima"
            # set autoconf(version) "5.9.0rc1"
        } else {
            # Old windows 5.5 layout
            # Assume we are in the same directory as saved_maxima
            if {[file isfile [set exe $up/src/saved_maxima.exe]]} {
                set env(MAXIMA_DIRECTORY) $up
                set maxima_priv(maxima_verpkgdatadir) \
                    $env(MAXIMA_DIRECTORY)
                set maxima_priv(xmaxima_maxima) $exe
                set maxima_priv(maxima_xmaximadir) [file dir $exe]

                # This should be unused
                set maxima_priv(maxima_verpkglibdir) \
                    $env(MAXIMA_DIRECTORY)
                set maxima_priv(maxima_verpkgdatadir) \
                    $env(MAXIMA_DIRECTORY)

                # This should be unused
                set maxima_priv(maxima_prefix) \
                    $env(MAXIMA_DIRECTORY)
            }
        }
    }
    #mike Could someone document all of these environment variables?
    # autoconf(prefix) does not seem to me to be the equivalent of
    # $env(MAXIMA_DIRECTORY) so I don't understand the next statement

    # jfa: MAXIMA_PREFIX supersedes MAXIMA_DIRECTORY. (Why? Because the
    #      option to configure is --prefix. MAXIMA_PREFIX is thus a runtime
    #      change of --prefix.)
    #      Yes, MAXIMA_DIRECTORY means the same thing. We only include
    #      it for some level of backward compatibility.
    if { [info exists env(MAXIMA_DIRECTORY)] } {
        set env(MAXIMA_PREFIX) $env(MAXIMA_DIRECTORY)
    }

    # jfa: This whole routine is a disaster. The general plan for maxima
    # paths is as follows:
    #   1) Use the environment variables if they exist.
    #   2) Otherwise, attempt to use the compile-time settings from
    #      autoconf.
    #   3) If the entire package has been moved to a prefix other than
    #      that given at compile time, use the location of the (x)maxima
    #      executable to determine the new prefix.
    # The corresponding path setting procedure in the maxima source can
    # be found in init-cl.lisp.

    # The following section should be considered temporary work-around.
    if { [info exists env(MAXIMA_VERPKGDATADIR)] } {
        set maxima_priv(maxima_verpkgdatadir) $env(MAXIMA_VERPKGDATADIR)
    }
    # End temporary workaround. It's only a workaround because the next
    # section is backwards: 

    #mike Is it correct to assume that autoconf exists and is valid
    # for binary windows distributions? I think it would be better
    # to make (MAXIMA_DIRECTORY) take precedence, and work off
    # [info nameofexe] if necessary.

    if {[info exists maxima_priv(maxima_prefix)]} {
        # drop through
    } elseif { [info exists env(MAXIMA_PREFIX)] } {
        set maxima_priv(maxima_prefix) $env(MAXIMA_PREFIX)
    } else {
        set maxima_priv(maxima_prefix) $autoconf(prefix)
    }
    if {[info exists maxima_priv(maxima_verpkgdatadir)]} {
        # drop through
    } else {
        if { [info exists env(MAXIMA_DATADIR)] } {
            set maxima_datadir $env(MAXIMA_DATADIR)
        } elseif { [info exists env(MAXIMA_PREFIX)] } {
            set maxima_datadir \
                [file join $env(MAXIMA_PREFIX) share]
        } else {
            set maxima_datadir $autoconf(datadir)
        }
        # maxima_datadir is unused outside of this proc

        if {![file isdir $maxima_datadir]} {
            tk_messageBox -title Warning -icon warning -message \
                [mc "Maxima data directory not found in '%s'" \
                             [file native  $maxima_datadir]]
        }
        set maxima_priv(maxima_verpkgdatadir) \
            [file join $maxima_datadir $autoconf(package) \
                 $autoconf(version)]
    }

    # omplotdata messages
    #::msgcat::mcload [file join $maxima_priv(maxima_verpkgdatadir) msgs]

    if {[info exists maxima_priv(maxima_verpkglibdir)]} {
        # drop through
    } elseif { [info exists env(MAXIMA_VERPKGLIBDIR)] } {
        set maxima_priv(maxima_verpkglibdir) $env(MAXIMA_VERPKGLIBDIR)
    } elseif { [info exists env(MAXIMA_PREFIX)] } {
        set maxima_priv(maxima_verpkglibdir) \
            [file join $env(MAXIMA_PREFIX) lib $autoconf(package) \
                 $autoconf(version)]
    } else {
        set maxima_priv(maxima_verpkglibdir) \
            [file join $autoconf(libdir) $autoconf(package) \
                 $autoconf(version)]
    }
    if {[info exists maxima_priv(maxima_xmaximadir)]} {
        # drop through
    } elseif { [info exists env(MAXIMA_XMAXIMADIR)] } {
        set maxima_priv(maxima_xmaximadir) $env(MAXIMA_XMAXIMADIR)
    } else {
        set maxima_priv(maxima_xmaximadir) \
            [file join $maxima_priv(maxima_verpkgdatadir) xmaxima]
    }

    # xmaxima messages
    ::msgcat::mcload [file join $maxima_priv(maxima_xmaximadir) msgs]

    # Define maxima_lang_subdir
    if { [info exists env(MAXIMA_LANG_SUBDIR)] } {
        set maxima_priv(maxima_lang_subdir) $env(MAXIMA_LANG_SUBDIR)
    } else {
        if { $tcl_platform(platform) == "windows" } {
            set wlocale [ ::msgcat::mclocale ]
        } else {
            set wlocale ""
            if { [info exists env(LC_ALL)] } { 
                set wlocale $env(LC_ALL) 
            } elseif { [info exists env(LC_MESSAGES)] } { 
                set wlocale $env(LC_MESSAGES) 
            } elseif { [info exists env(LANG)] } { 
                set wlocale $env(LANG) }
        }       
        # Only languages known to Maxima
        set wlocale [string tolower $wlocale]
        switch -glob $wlocale {
          "es*utf*" {
                    set maxima_priv(maxima_lang_subdir) "es.utf8"
                }
          "es*" {
                    set maxima_priv(maxima_lang_subdir) "es"
                }
          "pt_br*utf*" {
                    set maxima_priv(maxima_lang_subdir) "pt_BR.utf8"
                }
          "pt_br*" {
                    set maxima_priv(maxima_lang_subdir) "pt_BR"
                }
          "pt*utf*" {
                    set maxima_priv(maxima_lang_subdir) "pt.utf8"
                }
          "pt*" {
                    set maxima_priv(maxima_lang_subdir) "pt"
                }
          "de*utf*" {
                    set maxima_priv(maxima_lang_subdir) "de.utf8"
                }
          "de*" {
                    set maxima_priv(maxima_lang_subdir) "de"
                }
          "fr*utf*" {
                    set maxima_priv(maxima_lang_subdir) "fr.utf8"
                }
          "fr*" {
                    set maxima_priv(maxima_lang_subdir) "fr"
                }
          "it*utf*" {
                    set maxima_priv(maxima_lang_subdir) "it.utf8"
                }
          "it*" {
                    set maxima_priv(maxima_lang_subdir) "it"
                }
          "ru*utf*" {
                    set maxima_priv(maxima_lang_subdir) "ru.utf8"
                }
          "ru*koi*" {
                    set maxima_priv(maxima_lang_subdir) "ru.koi8r"
                }
          "ru*" {
                    set maxima_priv(maxima_lang_subdir) "ru"
                }
          default 
                {
                    set maxima_priv(maxima_lang_subdir) ""
                }
        }
        #puts $maxima_priv(maxima_lang_subdir)
    }

    # On Windows ::msgcat::mclocale is a good way to derive locale 
    if { $tcl_platform(platform) == "windows" } {
            set env(LANG) [ ::msgcat::mclocale ]
    }

    # Bring derived quantities up here too so we can see the
    # side effects of setting the above variables

    # used in Menu.tcl CMMenu.tcl
    if {[file isdir [set dir [file join  $maxima_priv(maxima_verpkgdatadir) info]]]} {
        # 5.6 and down
        set maxima_priv(pReferenceToc) \
            [file join $dir index.html]
    } elseif {[file isdir [set dir [file join  $maxima_priv(maxima_verpkgdatadir) doc]]]} {
        # 5.9 and up
        # first choose the HTML documentation
        if { $maxima_priv(maxima_lang_subdir) != "" && \
             [file exists [file join $dir html $maxima_priv(maxima_lang_subdir) index.html] ] } {
            set maxima_priv(pReferenceToc) [file join $dir html $maxima_priv(maxima_lang_subdir) index.html]
        } else {
            set maxima_priv(pReferenceToc) [file join $dir html index.html]
        }
        # if the platform is Windows and Maxima is running localized, try the following help files
        # if they exist:
        # 1st priority: localized CHM
        # 2nd priority: localized HTML
        # 3rd priority: english CHM
        # 4th priority: english HTML
        if { $tcl_platform(platform) == "windows" } {
            if { $maxima_priv(maxima_lang_subdir) != "" } {
                if {[file exists [file join $dir chm $maxima_priv(maxima_lang_subdir) maxima.chm] ] } {
                    set maxima_priv(pReferenceToc) [file join $dir chm $maxima_priv(maxima_lang_subdir) maxima.chm]
                } else {
                    if {[file exists [file join $dir html $maxima_priv(maxima_lang_subdir) index.html] ] } {
                        set maxima_priv(pReferenceToc) [file join $dir html $maxima_priv(maxima_lang_subdir) index.html]
                    } else {
                        if {[file exists [file join $dir chm maxima.chm] ] } {
                            set maxima_priv(pReferenceToc) [file join $dir chm maxima.chm]
                        } else {
                            set maxima_priv(pReferenceToc) [file join $dir html index.html]
                        }
                    }
                }
            } else {
                if {[file exists [file join $dir chm maxima.chm] ] } {
                    set maxima_priv(pReferenceToc) [file join $dir chm maxima.chm]
                } else {
                    set maxima_priv(pReferenceToc) [file join $dir html index.html]
                }
            }
        } else {
            # Platform != windows, just choose the HTML documentation
            if { $maxima_priv(maxima_lang_subdir) != "" && \
                [file exists [file join $dir html $maxima_priv(maxima_lang_subdir) index.html] ] } {
                set maxima_priv(pReferenceToc) [file join $dir html $maxima_priv(maxima_lang_subdir) index.html]
            } else {
                set maxima_priv(pReferenceToc) [file join $dir html index.html]
            }
        }
    } else {
        tk_messageBox -title Warning -icon warning -message \
            [mc "Documentation not found in '%s'" \
                 [file native  $maxima_priv(maxima_verpkgdatadir)]]
    }

    # used in Menu.tcl CMMenu.tcl
    if {[file isdir [set dir [file join  $maxima_priv(maxima_verpkgdatadir) tests]]]} {
        # 5.9 and up
        set maxima_priv(pTestsDir) $dir
    } elseif {[file isdir [set dir [file join  $maxima_priv(maxima_verpkgdatadir) doc]]]} {
        # 5.6 and down
        set maxima_priv(pTestsDir) $dir
    } else {
        # who cares
    }
    set file [file join $maxima_priv(maxima_xmaximadir) "intro.html"]
    if {![file isfile $file]} {
        tk_messageBox -title Warning -icon warning -message \
            [mc "Starting documentation not found in '%s'" [file native $file]]
        set maxima_priv(firstUrl) ""
    } else {
        if {$tcl_platform(platform) == "windows"} {
            # convert to unix
            set file [file dir $file]/[file tail $file]
        }
        # FIXME: This is bogus - need a FileToUrl
        set maxima_priv(firstUrl) file:/$file
    }
    # set up for autoloading
    global auto_path
    set dir [file join $maxima_priv(maxima_xmaximadir) Tkmaxima]
    if {[file isdir $dir]} {
        lappend auto_path $dir
    }
    # jfa: Windows 98 users were seeing long startup times because
    # MAXIMA_USERDIR defaults to HOME, which is usually C:\.
    # Make the default something else under Windows 98 as a workaround.
    # This is ugly.
    if {$tcl_platform(os) == "Windows 95"} {
        if {![info exists env(MAXIMA_USERDIR)]} {
            set env(MAXIMA_USERDIR) "$maxima_priv(maxima_prefix)/user"
        }
    }
    # jfa: extend path so that gcl can see gcc in windows package
    # I don't know that this is the best place for this
    if {$tcl_platform(platform) == "windows"} {
        # jfa: This is an attempt to get a working path designation
        # on various Windows versions.
        if {$tcl_platform(os) == "Windows 95"} {
            # Windows 95 or Windows 98
            regsub -all {/} "$maxima_priv(maxima_prefix)\\BIN" {\\} maxbinpath
        } else {
            # Other versions of Windows
            set maxbinpath "$maxima_priv(maxima_prefix)/bin"
        }
        set env(PATH) "$maxbinpath;$env(PATH)"
    }
}

proc vMAXSetMaximaCommand {} {
    global maxima_priv tcl_platform env

    set maxima_priv(localMaximaServer) ""
    if {[info exists maxima_priv(xmaxima_maxima)] && \
            $maxima_priv(xmaxima_maxima) != ""} {
        if {[set exe [auto_execok $maxima_priv(xmaxima_maxima)]] == "" } {

            tk_messageBox -title Error -icon error -message \
                [mc "Maxima executable not found\n%s\n\n Try setting the environment variable XMAXIMA_MAXIMA." \
                              [file native $maxima_priv(xmaxima_maxima)]]
            return
        }
    } elseif { [info exists env(XMAXIMA_MAXIMA)] } {
        set maxima_priv(xmaxima_maxima) $env(XMAXIMA_MAXIMA)
        if {[set exe [auto_execok $maxima_priv(xmaxima_maxima)]] == "" } {
            tk_messageBox -title Error -icon error -message \
                [concat [mc "Maxima executable not found."] "\n%s\nXMAXIMA_MAXIMA=$env(XMAXIMA_MAXIMA)"]
            return
        }
    } else {
        set maxima_priv(xmaxima_maxima) maxima
        if {[set exe [auto_execok $maxima_priv(xmaxima_maxima)]] == "" } {
            tk_messageBox -title Error -icon error -message \
                [mc "Maxima executable not found\n\n Try setting the environment variable  XMAXIMA_MAXIMA."]
        }
        # jfa: bypass maxima script on windows
        # vvz: on Windows 9X/ME only
        if {$tcl_platform(os) == "Windows 95"} {
            # maybe it's in lib - I don't like this
            set dir $maxima_priv(maxima_verpkglibdir)
            # FIXME - need autoconf(lisp) so we don't need glob
            set exes [glob -nocomplain $dir/binary-*/maxima.exe]
            if {[llength $exes] != "1" || \
                    [set exe [lindex $exes 0]] == "" || \
                    ![file isfile $exe]} {
                tk_messageBox -title Error -icon error -message \
                    [mc "Maxima executable not found\n\n Try setting the environment variable  XMAXIMA_MAXIMA."]
                return
            }
        } else {
            set maxima_priv(xmaxima_maxima) maxima
            if {[set exe [auto_execok $maxima_priv(xmaxima_maxima)]] == "" } {
                tk_messageBox -title Error -icon error -message \
                    [mc "Maxima executable not found\n\n Try setting the environment variable  XMAXIMA_MAXIMA."]
            }
        }
    }
    set command {}
    lappend command $exe
    eval lappend command $maxima_priv(opts)
    lappend command -s PORT
    if {$tcl_platform(platform) == "windows"} {
        lappend command > NUL
    } else {
        lappend command > /dev/null
    }
    lappend command &
    set maxima_priv(localMaximaServer) $command
}