uuu/uuu.lst

   1 uuu_version 1.0.0
   2 #
   3 # uuu(universal update utility) command list file
   4 # Firstly line must be uuu_version show minimize uuu host version number
   5 # ---------------------------------------------------------------------
   6 # Command Format PROTOCOL COMMAND ARG
   7 # PROTOCOL
   8 #          ALL protocol supported common command
   9 #                      done        #last command for whole flow
  10 #                      delay <ms>  # delay ms
  11 #                      sh\shell <any shell command> #Run shell command, such as wget to file from network
  12 #                      <        <any shell command> #use shell command's output as uuu command
  13 #                               this command generally used for burn some sequence number, such production id, mac address
  14 #                               for example:
  15 #                                      FB:< echo ucmd print
  16 #
  17 #          CFG:  Config protocol of specific usb device vid/pid
  18 #                SDPS|SDP|FB\Fastboot|FBK -chip <chip name> -pid <pid> -vid <vid> [-bcdversion <ver>]
  19 #
  20 #          SDPS: Stream download after MX8QXPB0
  21 #                      boot  -f  <filename> [-offset 0x0000]
  22 #
  23 #          SDP:  iMX6/iMX7 HID download protocol.
  24 #                      dcd   -f  <filename>
  25 #                      write -f  <filename> [-addr 0x000000] [-ivt 0]
  26 #                      jump  -f  <filename> [-ivt 0]
  27 #                      boot  -f  <filename> [-nojump]
  28 #                      rdmem -addr <mem_address> -format <8|16|32>
  29 #                      wrmem -addr <mem_address> -format <8|16|32> -value <mem_value>
  30 #
  31 #          FB[-t timeout]:\Fastboot: android fastboot protocol. unit of timeout is ms
  32 #                      getvar
  33 #                      ucmd <any uboot command>
  34 #                      acmd <any never returned uboot command, like booti, reboot>
  35 #                      flash [-raw2sparse] <partition> <filename>
  36 #                      download -f <filename>
  37 #                      crc -f <filename> [-format "mmc read $loadaddr"] [-blksz 512] [-each 0x4000000]
  38 #                                        [-seek 0] [-skip 0] [-nostop]
  39 #                                          each          CRC size each loop
  40 #                                          seek          skip bytes from storage
  41 #                                          skip          skip bytes from -f
  42 #                                          nostop        continue check even if found mismatch
  43 #                      write -f <filename> [-format "mmc write $loadaddr"] [-blksz 512] [-each 0x4000000]
  44 #                                        [-seek 0] [-skip 0] [-nostop]
  45 #                                          each          write size each loop
  46 #                                          seek          skip bytes from storage
  47 #                                          skip          skip bytes from -f
  48 #                                          nostop        continue write even if error occurs
  49 #
  50 #
  51 #          FBK: community with kernel with fastboot protocol. DO NOT compatible with fastboot tools.
  52 #                      ucmd <any kernel command> and wait for command finish
  53 #                      acmd <any kernel command> don't wait for command finish
  54 #                      sync                      wait for acmd process finish.
  55 #                      ucp <soure> <destinate>   copy file from/to target
  56 #                                                T:<filename> means target board file.
  57 #                                                T:- means copy data to target's stdio pipe.
  58 #                                                copy image T:/root/image ;download image to path /root/image
  59 #                                                copy T:/root/image image ;upload /root/image to file image.
  60 #                      Example for transfer big file
  61 #                              acmd tar -            ; run tar background and get data from stdio
  62 #                              ucp rootfs.tar.gz T:- ; send to target stdio pipe
  63 #                              sync                  ; wait for tar process exit.
  64 #
  65 # For example:
  66 #          SDPS: boot -f <filename>
  67 #          SDP:  boot -f <filename>
  68 #          CFG: SDP: -chip imx6ull -pid 0x1234 -vid 0x5678
  69 #
  70 # SDP: boot -f u-boot-imx7dsabresd_sd.imx -nojump
  71 # SDP: write -f zImage -addr 0x80800000
  72 # SDP: write -f zImage-imx7d-sdb.dtb -addr 0x83000000
  73 # SDP: write -f fsl-image-mfgtool-initramfs-imx_mfgtools.cpio.gz.u-boot -addr 0x83800000
  74 # SDP: jump -f u-boot-dtb.imx -ivt
  75
  76 CFG: FB:  -vid 0x18D1 -pid 0x0D02
  77 SDP: boot -f u-boot-dtb.imx
  78 FB: getvar version
  79 FB: ucmd setenv fastboot_buffer 0x80800000
  80 FB: download -f zImage
  81 FB: ucmd setenv fastboot_buffer 0x83000000
  82 FB: download -f zImage-imx7d-sdb.dtb
  83 FB: ucmd bootz 0x80800000 - 0x83000000