etc/protocols - sync with NetBSD-8
[minix.git] / tests / net / mpls / t_mpls_fw6.sh
blob75f5081139abc0eae23a39dbd2338945518a18c7
1 # $NetBSD: t_mpls_fw6.sh,v 1.2 2015/08/07 00:50:12 ozaki-r Exp $
3 # Copyright (c) 2015 The NetBSD Foundation, Inc.
4 # All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
8 # are met:
9 # 1. Redistributions of source code must retain the above copyright
10 # notice, this list of conditions and the following disclaimer.
11 # 2. Redistributions in binary form must reproduce the above copyright
12 # notice, this list of conditions and the following disclaimer in the
13 # documentation and/or other materials provided with the distribution.
15 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
16 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
17 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
18 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
19 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
20 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
21 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
22 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
25 # POSSIBILITY OF SUCH DAMAGE.
28 # Test MPLS encap/decap and forwarding using INET6 as encapsulated protocol
29 # Setup four routers connected like this: R1---R2---R3---R4--
30 # Goal is to be able to ping from R1 the outermost interface of R4
31 # Disable net.inet6.ip6.forwarding, enable net.mpls.forwarding
32 # Add route on R1 in order to encapsulate into MPLS the IP6 packets with
33 # destination equal to R4 right hand side interface
34 # Add MPLS routes on R2 in order to forward frames belonging to that FEC to R3
35 # Add MPLS "POP" route on R3 for that FEC, pointing to R4
36 # Do the same for the reverse direction (R4 to R1)
37 # ping6 from R1 to R4 right hand side interface
39 # redo the test using IPv6 explicit null label
41 RUMP_SERVER1=unix://./r1
42 RUMP_SERVER2=unix://./r2
43 RUMP_SERVER3=unix://./r3
44 RUMP_SERVER4=unix://./r4
46 RUMP_FLAGS6=\
47 "-lrumpnet -lrumpnet_net -lrumpnet_netmpls -lrumpnet_netinet -lrumpnet_netinet6 -lrumpnet_shmif"
49 atf_test_case mplsfw6 cleanup
50 mplsfw6_head()
53 atf_set "descr" "IP6/MPLS forwarding test using PHP"
54 atf_set "require.progs" "rump_server"
57 startservers()
60 ulimit -r 300
61 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER1}
62 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER2}
63 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER3}
64 atf_check -s exit:0 rump_server ${RUMP_FLAGS6} ${RUMP_SERVER4}
67 configservers()
70 # Setup the first server
71 export RUMP_SERVER=${RUMP_SERVER1}
72 atf_check -s exit:0 rump.ifconfig shmif0 create
73 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1
74 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234::1/64 alias
75 atf_check -s exit:0 rump.ifconfig mpls0 create up
76 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
77 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
78 atf_check -s exit:0 rump.route -q add -inet6 fd00:1234:0:3::/64 \
79 -ifa fd00:1234::1 \
80 -ifp mpls0 -tag 25 -inet6 fd00:1234::2
82 # Setup the second server
83 export RUMP_SERVER=${RUMP_SERVER2}
84 atf_check -s exit:0 rump.ifconfig shmif0 create
85 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1
86 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234::2/64 alias
87 atf_check -s exit:0 rump.ifconfig shmif1 create
88 atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom2
89 atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:1::1/64 alias
90 atf_check -s exit:0 rump.ifconfig mpls0 create up
91 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
92 atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1
93 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
94 atf_check -s exit:0 rump.route -q add -mpls 25 -tag 30 \
95 -inet6 fd00:1234:0:1::2
96 atf_check -s exit:0 rump.route -q add -mpls 27 -tag ${1} -inet6 \
97 fd00:1234::1
99 # Setup the third server
100 export RUMP_SERVER=${RUMP_SERVER3}
101 atf_check -s exit:0 rump.ifconfig shmif0 create
102 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom2
103 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234:0:1::2/64 alias
104 atf_check -s exit:0 rump.ifconfig shmif1 create
105 atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom3
106 atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:2::1/64 alias
107 atf_check -s exit:0 rump.ifconfig mpls0 create up
108 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
109 atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1
110 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
111 atf_check -s exit:0 rump.route -q add -mpls 30 -tag ${1} \
112 -inet6 fd00:1234:0:2::2
113 atf_check -s exit:0 rump.route -q add -mpls 26 -tag 27 \
114 -inet6 fd00:1234:0:1::1
116 # Setup the fourth server
117 export RUMP_SERVER=${RUMP_SERVER4}
118 atf_check -s exit:0 rump.ifconfig shmif0 create
119 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom3
120 atf_check -s exit:0 rump.ifconfig shmif0 inet6 fd00:1234:0:2::2/64 alias
121 atf_check -s exit:0 rump.ifconfig shmif1 create
122 atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom4
123 atf_check -s exit:0 rump.ifconfig shmif1 inet6 fd00:1234:0:3::1/64 alias
124 atf_check -s exit:0 rump.ifconfig mpls0 create up
125 atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
126 atf_check -s exit:0 rump.sysctl -q -w net.inet6.ip6.forwarding=0
127 atf_check -s exit:0 rump.route -q add -inet6 fd00:1234::/64 \
128 -ifa fd00:1234:0:2::2 \
129 -ifp mpls0 -tag 26 -inet6 fd00:1234:0:2::1
131 unset RUMP_SERVER
134 doping()
137 export RUMP_SERVER=${RUMP_SERVER1}
138 atf_check -s exit:0 \
139 -o match:" bytes from fd00:1234::2, icmp_seq=" \
140 rump.ping6 -n -o -X 2 fd00:1234::2
141 export RUMP_SERVER=${RUMP_SERVER2}
142 atf_check -s exit:0 \
143 -o match:" bytes from fd00:1234:0:1::2, icmp_seq=" \
144 rump.ping6 -n -o -X 2 fd00:1234:0:1::2
145 export RUMP_SERVER=${RUMP_SERVER3}
146 atf_check -s exit:0 \
147 -o match:" bytes from fd00:1234:0:2::2, icmp_seq=" \
148 rump.ping6 -n -o -X 2 fd00:1234:0:2::2
149 export RUMP_SERVER=${RUMP_SERVER1}
150 atf_check -s exit:0 \
151 -o match:" bytes from fd00:1234:0:3::1, icmp_seq=" \
152 rump.ping6 -n -o -X 2 fd00:1234:0:3::1
153 unset RUMP_SERVER
156 do_check_route()
159 export RUMP_SERVER=${RUMP_SERVER1}
160 atf_check -s exit:0 \
161 -o match:"^fd00:1234:0:3::/64.+fd00:1234::2.+25.+mpls0" \
162 rump.netstat -nrT
163 unset RUMP_SERVER
166 docleanup()
169 RUMP_SERVER=${RUMP_SERVER1} rump.halt
170 RUMP_SERVER=${RUMP_SERVER2} rump.halt
171 RUMP_SERVER=${RUMP_SERVER3} rump.halt
172 RUMP_SERVER=${RUMP_SERVER4} rump.halt
175 mplsfw6_body()
178 startservers
179 configservers 3
180 do_check_route
181 doping
184 mplsfw6_cleanup()
187 docleanup
191 atf_test_case mplsfw6_expl cleanup
192 mplsfw4_expl_head()
195 atf_set "descr" "IP6/MPLS forwarding test using explicit NULL labels"
196 atf_set "require.progs" "rump_server"
199 mplsfw6_expl_body()
202 startservers
203 configservers 2
204 do_check_route
205 doping
208 mplsfw6_expl_cleanup()
211 docleanup
215 atf_init_test_cases()
218 atf_add_test_case mplsfw6
219 atf_add_test_case mplsfw6_expl