drivers/dpeth/3c501.h

   1 /*
   2 **  File:       3c501.h         Jan. 14, 1997
   3 **
   4 **  Author:     Giovanni Falzoni <gfalzoni@inwind.it>
   5 **
   6 **  Interface description for 3Com Etherlink boards
   7 **
   8 **  $Log$
   9 **  Revision 1.1  2005/06/29 10:16:46  beng
  10 **  Import of dpeth 3c501/3c509b/.. ethernet driver by
  11 **  Giovanni Falzoni <fgalzoni@inwind.it>.
  12 **
  13 **  Revision 2.0  2005/06/26 16:16:46  lsodgf0
  14 **  Initial revision for Minix 3.0.6
  15 */
  16
  17 /* The various board command registers                                   */
  18 #define EL1_ADDRESS     0x00    /* Board station address, 6 bytes        */
  19 #define EL1_RECV        0x06    /* Board Receive Config/Status Reg.      */
  20 #define EL1_XMIT        0x07    /* Board Transmit Config/Status Reg.     */
  21 #define EL1_XMITPTR     0x08    /* Transmit buffer pointer (word access) */
  22 #define EL1_RECVPTR     0x0A    /* Receive buffer pointer (word access)  */
  23 #define EL1_SAPROM      0x0C    /* Window on Station Addr prom           */
  24 #define EL1_CSR         0x0E    /* Board Command/Status Register         */
  25 #define EL1_DATAPORT    0x0F    /* Window on packet buffer (Data Port)   */
  26
  27 /* Bits in EL1_RECV, interrupt enable on write, status when read         */
  28 #define ERSR_NONE       0x00    /* Match mode in bits 5-6 (wo)           */
  29 #define ERSR_ALL        0x40    /* Promiscuous receive (wo)              */
  30 #define ERSR_BROAD      0x80    /* Station address plus broadcast (wo)   */
  31 #define ERSR_MULTI      0x80    /* Station address plus multicast 0xC0   */
  32 #define ERSR_STALE      0x80    /* Receive status previously read (ro)   */
  33 #define ERSR_GOOD       0x20    /* Well formed packets only (rw)         */
  34 #define ERSR_ANY        0x10    /* Any packet, even with errors (rw)     */
  35 #define ERSR_SHORT      0x08    /* Short frame (rw)                      */
  36 #define ERSR_DRIBBLE    0x04    /* Dribble error (rw)                    */
  37 #define ERSR_FCS        0x02    /* CRC error (rw)                        */
  38 #define ERSR_OVER       0x01    /* Data overflow (rw)                    */
  39
  40 #define ERSR_RERROR     (ERSR_SHORT|ERSR_DRIBBLE|ERSR_FCS|ERSR_OVER)
  41 #define ERSR_RMASK      (ERSR_GOOD|ERSR_RERROR)/*(ERSR_GOOD|ERSR_ANY|ERSR_RERROR)*/
  42
  43 /* Bits in EL1_XMIT, interrupt enable on write, status when read         */
  44 #define EXSR_IDLE       0x08    /* Transmit idle (send completed)        */
  45 #define EXSR_16JAM      0x04    /* Packet sending got 16 collisions      */
  46 #define EXSR_JAM        0x02    /* Packet sending got a collision        */
  47 #define EXSR_UNDER      0x01    /* Data underflow in sending             */
  48
  49 /* Bits in EL1_CSR (Configuration Status Register)                       */
  50 #define ECSR_RESET      0x80    /* Reset the controller (wo)             */
  51 #define ECSR_XMTBSY     0x80    /* Transmitter busy (ro)                 */
  52 #define ECSR_RIDE       0x01    /* Request interrupt/DMA enable (rw)     */
  53 #define ECSR_DMA        0x20    /* DMA request (rw)                      */
  54 #define ECSR_EDMA       0x10    /* DMA done (ro)                         */
  55 #define ECSR_CRC        0x02    /* Causes CRC error on transmit (wo)     */
  56 #define ECSR_RCVBSY     0x01    /* Receive in progress (ro)              */
  57 #define ECSR_LOOP       (3<<2)  /* 2 bit field in bits 2,3, loopback     */
  58 #define ECSR_RECV       (2<<2)  /* Gives buffer to receiver (rw)         */
  59 #define ECSR_XMIT       (1<<2)  /* Gives buffer to transmit (rw)         */
  60 #define ECSR_SYS        (0<<2)  /* Gives buffer to processor (wo)        */
  61
  62 #define EL1_BFRSIZ      2048    /* Number of bytes in board buffer       */
  63
  64 #define inb_el1(dep,reg) (inb(dep->de_base_port+(reg)))
  65 #define inw_el1(dep,reg) (inw(dep->de_base_port+(reg)))
  66 #define outb_el1(dep,reg,data) (outb(dep->de_base_port+(reg),data))
  67 #define outw_el1(dep,reg,data) (outw(dep->de_base_port+(reg),data))
  68
  69 /** 3c501.h **/