bin/pax/tables.h

   1 /*      $NetBSD: tables.h,v 1.10 2007/04/29 20:23:34 msaitoh Exp $      */
   2
   3 /*-
   4  * Copyright (c) 1992 Keith Muller.
   5  * Copyright (c) 1992, 1993
   6  *      The Regents of the University of California.  All rights reserved.
   7  *
   8  * This code is derived from software contributed to Berkeley by
   9  * Keith Muller of the University of California, San Diego.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions and the following disclaimer.
  16  * 2. Redistributions in binary form must reproduce the above copyright
  17  *    notice, this list of conditions and the following disclaimer in the
  18  *    documentation and/or other materials provided with the distribution.
  19  * 3. Neither the name of the University nor the names of its contributors
  20  *    may be used to endorse or promote products derived from this software
  21  *    without specific prior written permission.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  26  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  27  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  33  * SUCH DAMAGE.
  34  *
  35  *      @(#)tables.h    8.1 (Berkeley) 5/31/93
  36  */
  37
  38 /*
  39  * data structures and constants used by the different databases kept by pax
  40  */
  41
  42 /*
  43  * Hash Table Sizes MUST BE PRIME, if set too small performance suffers.
  44  * Probably safe to expect 500000 inodes per tape. Assuming good key
  45  * distribution (inodes) chains of under 50 long (worse case) is ok.
  46  */
  47 #define L_TAB_SZ        2503            /* hard link hash table size */
  48 #define F_TAB_SZ        50503           /* file time hash table size */
  49 #define N_TAB_SZ        541             /* interactive rename hash table */
  50 #define D_TAB_SZ        317             /* unique device mapping table */
  51 #define A_TAB_SZ        317             /* ftree dir access time reset table */
  52 #define MAXKEYLEN       64              /* max number of chars for hash */
  53
  54 /*
  55  * file hard link structure (hashed by dev/ino and chained) used to find the
  56  * hard links in a file system or with some archive formats (cpio)
  57  */
  58 typedef struct hrdlnk {
  59         char            *name;  /* name of first file seen with this ino/dev */
  60         dev_t           dev;    /* files device number */
  61         ino_t           ino;    /* files inode number */
  62         u_long          nlink;  /* expected link count */
  63         struct hrdlnk   *fow;
  64 } HRDLNK;
  65
  66 /*
  67  * Archive write update file time table (the -u, -C flag), hashed by filename.
  68  * Filenames are stored in a scratch file at seek offset into the file. The
  69  * file time (mod time) and the file name length (for a quick check) are
  70  * stored in a hash table node. We were forced to use a scratch file because
  71  * with -u, the mtime for every node in the archive must always be available
  72  * to compare against (and this data can get REALLY large with big archives).
  73  * By being careful to read only when we have a good chance of a match, the
  74  * performance loss is not measurable (and the size of the archive we can
  75  * handle is greatly increased).
  76  */
  77 typedef struct ftm {
  78         int             namelen;        /* file name length */
  79         time_t          mtime;          /* files last modification time */
  80         off_t           seek;           /* location in scratch file */
  81         struct ftm      *fow;
  82 } FTM;
  83
  84 /*
  85  * Interactive rename table (-i flag), hashed by orig filename.
  86  * We assume this will not be a large table as this mapping data can only be
  87  * obtained through interactive input by the user. Nobody is going to type in
  88  * changes for 500000 files? We use chaining to resolve collisions.
  89  */
  90
  91 typedef struct namt {
  92         char            *oname;         /* old name */
  93         char            *nname;         /* new name typed in by the user */
  94         struct namt     *fow;
  95 } NAMT;
  96
  97 /*
  98  * Unique device mapping tables. Some protocols (e.g. cpio) require that the
  99  * <c_dev,c_ino> pair will uniquely identify a file in an archive unless they
 100  * are links to the same file. Appending to archives can break this. For those
 101  * protocols that have this requirement we map c_dev to a unique value not seen
 102  * in the archive when we append. We also try to handle inode truncation with
 103  * this table. (When the inode field in the archive header are too small, we
 104  * remap the dev on writes to remove accidental collisions).
 105  *
 106  * The list is hashed by device number using chain collision resolution. Off of
 107  * each DEVT are linked the various remaps for this device based on those bits
 108  * in the inode which were truncated. For example if we are just remapping to
 109  * avoid a device number during an update append, off the DEVT we would have
 110  * only a single DLIST that has a truncation id of 0 (no inode bits were
 111  * stripped for this device so far). When we spot inode truncation we create
 112  * a new mapping based on the set of bits in the inode which were stripped off.
 113  * so if the top four bits of the inode are stripped and they have a pattern of
 114  * 0110...... (where . are those bits not truncated) we would have a mapping
 115  * assigned for all inodes that has the same 0110.... pattern (with this dev
 116  * number of course). This keeps the mapping sparse and should be able to store
 117  * close to the limit of files which can be represented by the optimal
 118  * combination of dev and inode bits, and without creating a fouled up archive.
 119  * Note we also remap truncated devs in the same way (an exercise for the
 120  * dedicated reader; always wanted to say that...:)
 121  */
 122
 123 typedef struct devt {
 124         dev_t           dev;    /* the orig device number we now have to map */
 125         struct devt     *fow;   /* new device map list */
 126         struct dlist    *list;  /* map list based on inode truncation bits */
 127 } DEVT;
 128
 129 typedef struct dlist {
 130         ino_t trunc_bits;       /* truncation pattern for a specific map */
 131         dev_t dev;              /* the new device id we use */
 132         struct dlist *fow;
 133 } DLIST;
 134
 135 /*
 136  * ftree directory access time reset table. When we are done with a
 137  * subtree we reset the access and mod time of the directory when the tflag is
 138  * set. Not really explicitly specified in the pax spec, but easy and fast to
 139  * do (and this may have even been intended in the spec, it is not clear).
 140  * table is hashed by inode with chaining.
 141  */
 142
 143 typedef struct atdir {
 144         char *name;     /* name of directory to reset */
 145         dev_t dev;      /* dev and inode for fast lookup */
 146         ino_t ino;
 147         time_t mtime;   /* access and mod time to reset to */
 148         time_t atime;
 149         struct atdir *fow;
 150 } ATDIR;
 151
 152 /*
 153  * created directory time and mode storage entry. After pax is finished during
 154  * extraction or copy, we must reset directory access modes and times that
 155  * may have been modified after creation (they no longer have the specified
 156  * times and/or modes). We must reset time in the reverse order of creation,
 157  * because entries are added  from the top of the file tree to the bottom.
 158  * We MUST reset times from leaf to root (it will not work the other
 159  * direction).  Entries are recorded into a spool file to make reverse
 160  * reading faster.
 161  */
 162
 163 typedef struct dirdata {
 164 #ifdef DIRS_USE_FILE
 165         int nlen;       /* length of the directory name (includes \0) */
 166         off_t npos;     /* position in file where this dir name starts */
 167 #else
 168         char *name;     /* file name */
 169         struct dirdata *next;
 170 #endif
 171         mode_t mode;    /* file mode to restore */
 172         time_t mtime;   /* mtime to set */
 173         time_t atime;   /* atime to set */
 174         long fflags;    /* file flags to set */
 175         int frc_mode;   /* do we force mode settings? */
 176 } DIRDATA;