Remove building with NOCRYPTO option

[minix.git] / bin / dd / dd.c

/*      $NetBSD: dd.c,v 1.51 2016/09/05 01:00:07 sevan Exp $    */

/*-
 * Copyright (c) 1991, 1993, 1994
 *      The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * Keith Muller of the University of California, San Diego and Lance
 * Visser of Convex Computer Corporation.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
#ifndef lint
__COPYRIGHT("@(#) Copyright (c) 1991, 1993, 1994\
 The Regents of the University of California.  All rights reserved.");
#endif /* not lint */

#ifndef lint
#if 0
static char sccsid[] = "@(#)dd.c        8.5 (Berkeley) 4/2/94";
#else
__RCSID("$NetBSD: dd.c,v 1.51 2016/09/05 01:00:07 sevan Exp $");
#endif
#endif /* not lint */

#include <sys/param.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/mtio.h>
#include <sys/time.h>

#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <locale.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>

#include "dd.h"
#include "extern.h"

static void dd_close(void);
static void dd_in(void);
static void getfdtype(IO *);
static void redup_clean_fd(IO *);
static void setup(void);

IO              in, out;                /* input/output state */
STAT            st;                     /* statistics */
void            (*cfunc)(void);         /* conversion function */
uint64_t        cpy_cnt;                /* # of blocks to copy */
static off_t    pending = 0;            /* pending seek if sparse */
u_int           ddflags;                /* conversion options */
#ifdef NO_IOFLAG
#define         iflag   O_RDONLY
#define         oflag   O_CREAT
#else
u_int           iflag = O_RDONLY;       /* open(2) flags for input file */
u_int           oflag = O_CREAT;        /* open(2) flags for output file */
#endif /* NO_IOFLAG */
uint64_t        cbsz;                   /* conversion block size */
u_int           files_cnt = 1;          /* # of files to copy */
uint64_t        progress = 0;           /* display sign of life */
const u_char    *ctab;                  /* conversion table */
sigset_t        infoset;                /* a set blocking SIGINFO */
const char      *msgfmt = "posix";      /* default summary() message format */

/*
 * Ops for stdin/stdout and crunch'd dd.  These are always host ops.
 */
static const struct ddfops ddfops_stdfd = {
        .op_open = open,
        .op_close = close,
        .op_fcntl = fcntl,
        .op_ioctl = ioctl,
        .op_fstat = fstat,
        .op_fsync = fsync,
        .op_ftruncate = ftruncate,
        .op_lseek = lseek,
        .op_read = read,
        .op_write = write,
};
extern const struct ddfops ddfops_prog;

int
main(int argc, char *argv[])
{
        int ch;

        setprogname(argv[0]);
        (void)setlocale(LC_ALL, "");

        while ((ch = getopt(argc, argv, "")) != -1) {
                switch (ch) {
                default:
                        errx(EXIT_FAILURE, "usage: dd [operand ...]");
                        /* NOTREACHED */
                }
        }
        argc -= (optind - 1);
        argv += (optind - 1);

        jcl(argv);
#ifndef CRUNCHOPS
        if (ddfops_prog.op_init && ddfops_prog.op_init() == -1)
                err(1, "prog init");
#endif
        setup();

        (void)signal(SIGINFO, summaryx);
        (void)signal(SIGINT, terminate);
        (void)sigemptyset(&infoset);
        (void)sigaddset(&infoset, SIGINFO);

        (void)atexit(summary);

        while (files_cnt--)
                dd_in();

        dd_close();
        exit(0);
        /* NOTREACHED */
}

static void
setup(void)
{
#ifdef CRUNCHOPS
        const struct ddfops *prog_ops = &ddfops_stdfd;
#else
        const struct ddfops *prog_ops = &ddfops_prog;
#endif

        if (in.name == NULL) {
                in.name = "stdin";
                in.fd = STDIN_FILENO;
                in.ops = &ddfops_stdfd;
        } else {
                in.ops = prog_ops;
                in.fd = ddop_open(in, in.name, iflag, 0);
                if (in.fd < 0)
                        err(EXIT_FAILURE, "%s", in.name);
                        /* NOTREACHED */

                /* Ensure in.fd is outside the stdio descriptor range */
                redup_clean_fd(&in);
        }

        getfdtype(&in);

        if (files_cnt > 1 && !(in.flags & ISTAPE)) {
                errx(EXIT_FAILURE, "files is not supported for non-tape devices");
                /* NOTREACHED */
        }

        if (out.name == NULL) {
                /* No way to check for read access here. */
                out.fd = STDOUT_FILENO;
                out.name = "stdout";
                out.ops = &ddfops_stdfd;
        } else {
                out.ops = prog_ops;

#ifndef NO_IOFLAG
                if ((oflag & O_TRUNC) && (ddflags & C_SEEK)) {
                        errx(EXIT_FAILURE, "oflag=trunc is incompatible "
                             "with seek or oseek operands, giving up.");
                        /* NOTREACHED */
                }
                if ((oflag & O_TRUNC) && (ddflags & C_NOTRUNC)) {
                        errx(EXIT_FAILURE, "oflag=trunc is incompatible "
                             "with conv=notrunc operand, giving up.");
                        /* NOTREACHED */
                }
#endif /* NO_IOFLAG */
#define OFLAGS \
    (oflag | (ddflags & (C_SEEK | C_NOTRUNC) ? 0 : O_TRUNC))
                out.fd = ddop_open(out, out.name, O_RDWR | OFLAGS, DEFFILEMODE);
                /*
                 * May not have read access, so try again with write only.
                 * Without read we may have a problem if output also does
                 * not support seeks.
                 */
                if (out.fd < 0) {
                        out.fd = ddop_open(out, out.name, O_WRONLY | OFLAGS,
                            DEFFILEMODE);
                        out.flags |= NOREAD;
                }
                if (out.fd < 0) {
                        err(EXIT_FAILURE, "%s", out.name);
                        /* NOTREACHED */
                }

                /* Ensure out.fd is outside the stdio descriptor range */
                redup_clean_fd(&out);
        }

        getfdtype(&out);

        /*
         * Allocate space for the input and output buffers.  If not doing
         * record oriented I/O, only need a single buffer.
         */
        if (!(ddflags & (C_BLOCK|C_UNBLOCK))) {
                size_t dbsz = out.dbsz;
                if (!(ddflags & C_BS))
                        dbsz += in.dbsz - 1;
                if ((in.db = malloc(dbsz)) == NULL) {
                        err(EXIT_FAILURE, NULL);
                        /* NOTREACHED */
                }
                out.db = in.db;
        } else if ((in.db =
            malloc((u_int)(MAX(in.dbsz, cbsz) + cbsz))) == NULL ||
            (out.db = malloc((u_int)(out.dbsz + cbsz))) == NULL) {
                err(EXIT_FAILURE, NULL);
                /* NOTREACHED */
        }
        in.dbp = in.db;
        out.dbp = out.db;

        /* Position the input/output streams. */
        if (in.offset)
                pos_in();
        if (out.offset)
                pos_out();

        /*
         * Truncate the output file; ignore errors because it fails on some
         * kinds of output files, tapes, for example.
         */
        if ((ddflags & (C_OF | C_SEEK | C_NOTRUNC)) == (C_OF | C_SEEK))
                (void)ddop_ftruncate(out, out.fd, (off_t)out.offset * out.dbsz);

        /*
         * If converting case at the same time as another conversion, build a
         * table that does both at once.  If just converting case, use the
         * built-in tables.
         */
        if (ddflags & (C_LCASE|C_UCASE)) {
#ifdef  NO_CONV
                /* Should not get here, but just in case... */
                errx(EXIT_FAILURE, "case conv and -DNO_CONV");
                /* NOTREACHED */
#else   /* NO_CONV */
                u_int cnt;

                if (ddflags & C_ASCII || ddflags & C_EBCDIC) {
                        if (ddflags & C_LCASE) {
                                for (cnt = 0; cnt < 256; ++cnt)
                                        casetab[cnt] = tolower(ctab[cnt]);
                        } else {
                                for (cnt = 0; cnt < 256; ++cnt)
                                        casetab[cnt] = toupper(ctab[cnt]);
                        }
                } else {
                        if (ddflags & C_LCASE) {
                                for (cnt = 0; cnt < 256; ++cnt)
                                        casetab[cnt] = tolower(cnt);
                        } else {
                                for (cnt = 0; cnt < 256; ++cnt)
                                        casetab[cnt] = toupper(cnt);
                        }
                }

                ctab = casetab;
#endif  /* NO_CONV */
        }

        (void)gettimeofday(&st.start, NULL);    /* Statistics timestamp. */
}

static void
getfdtype(IO *io)
{
        struct mtget mt;
        struct stat sb;

        if (io->ops->op_fstat(io->fd, &sb)) {
                err(EXIT_FAILURE, "%s", io->name);
                /* NOTREACHED */
        }
        if (S_ISCHR(sb.st_mode))
                io->flags |= io->ops->op_ioctl(io->fd, MTIOCGET, &mt)
                    ? ISCHR : ISTAPE;
        else if (io->ops->op_lseek(io->fd, (off_t)0, SEEK_CUR) == -1
            && errno == ESPIPE)
                io->flags |= ISPIPE;            /* XXX fixed in 4.4BSD */
}

/*
 * Move the parameter file descriptor to a descriptor that is outside the
 * stdio descriptor range, if necessary.  This is required to avoid
 * accidentally outputting completion or error messages into the
 * output file that were intended for the tty.
 */
static void
redup_clean_fd(IO *io)
{
        int fd = io->fd;
        int newfd;

        if (fd != STDIN_FILENO && fd != STDOUT_FILENO &&
            fd != STDERR_FILENO)
                /* File descriptor is ok, return immediately. */
                return;

        /*
         * 3 is the first descriptor greater than STD*_FILENO.  Any
         * free descriptor valued 3 or above is acceptable...
         */
        newfd = io->ops->op_fcntl(fd, F_DUPFD, 3);
        if (newfd < 0) {
                err(EXIT_FAILURE, "dupfd IO");
                /* NOTREACHED */
        }

        io->ops->op_close(fd);
        io->fd = newfd;
}

static void
dd_in(void)
{
        int flags;
        int64_t n;

        for (flags = ddflags;;) {
                if (cpy_cnt && (st.in_full + st.in_part) >= cpy_cnt)
                        return;

                /*
                 * Clear the buffer first if doing "sync" on input.
                 * If doing block operations use spaces.  This will
                 * affect not only the C_NOERROR case, but also the
                 * last partial input block which should be padded
                 * with zero and not garbage.
                 */
                if (flags & C_SYNC) {
                        if (flags & (C_BLOCK|C_UNBLOCK))
                                (void)memset(in.dbp, ' ', in.dbsz);
                        else
                                (void)memset(in.dbp, 0, in.dbsz);
                }

                n = ddop_read(in, in.fd, in.dbp, in.dbsz);
                if (n == 0) {
                        in.dbrcnt = 0;
                        return;
                }

                /* Read error. */
                if (n < 0) {

                        /*
                         * If noerror not specified, die.  POSIX requires that
                         * the warning message be followed by an I/O display.
                         */
                        if (!(flags & C_NOERROR)) {
                                err(EXIT_FAILURE, "%s", in.name);
                                /* NOTREACHED */
                        }
                        warn("%s", in.name);
                        summary();

                        /*
                         * If it's not a tape drive or a pipe, seek past the
                         * error.  If your OS doesn't do the right thing for
                         * raw disks this section should be modified to re-read
                         * in sector size chunks.
                         */
                        if (!(in.flags & (ISPIPE|ISTAPE)) &&
                            ddop_lseek(in, in.fd, (off_t)in.dbsz, SEEK_CUR))
                                warn("%s", in.name);

                        /* If sync not specified, omit block and continue. */
                        if (!(ddflags & C_SYNC))
                                continue;

                        /* Read errors count as full blocks. */
                        in.dbcnt += in.dbrcnt = in.dbsz;
                        ++st.in_full;

                /* Handle full input blocks. */
                } else if ((uint64_t)n == in.dbsz) {
                        in.dbcnt += in.dbrcnt = n;
                        ++st.in_full;

                /* Handle partial input blocks. */
                } else {
                        /* If sync, use the entire block. */
                        if (ddflags & C_SYNC)
                                in.dbcnt += in.dbrcnt = in.dbsz;
                        else
                                in.dbcnt += in.dbrcnt = n;
                        ++st.in_part;
                }

                /*
                 * POSIX states that if bs is set and no other conversions
                 * than noerror, notrunc or sync are specified, the block
                 * is output without buffering as it is read.
                 */
                if (ddflags & C_BS) {
                        out.dbcnt = in.dbcnt;
                        dd_out(1);
                        in.dbcnt = 0;
                        continue;
                }

                if (ddflags & C_SWAB) {
                        if ((n = in.dbrcnt) & 1) {
                                ++st.swab;
                                --n;
                        }
                        swab(in.dbp, in.dbp, n);
                }

                in.dbp += in.dbrcnt;
                (*cfunc)();
        }
}

/*
 * Cleanup any remaining I/O and flush output.  If necessary, output file
 * is truncated.
 */
static void
dd_close(void)
{

        if (cfunc == def)
                def_close();
        else if (cfunc == block)
                block_close();
        else if (cfunc == unblock)
                unblock_close();
        if (ddflags & C_OSYNC && out.dbcnt < out.dbsz) {
                (void)memset(out.dbp, 0, out.dbsz - out.dbcnt);
                out.dbcnt = out.dbsz;
        }
        /* If there are pending sparse blocks, make sure
         * to write out the final block un-sparse
         */
        if ((out.dbcnt == 0) && pending) {
                memset(out.db, 0, out.dbsz);
                out.dbcnt = out.dbsz;
                out.dbp = out.db + out.dbcnt;
                pending -= out.dbsz;
        }
        if (out.dbcnt)
                dd_out(1);

        /*
         * Reporting nfs write error may be deferred until next
         * write(2) or close(2) system call.  So, we need to do an
         * extra check.  If an output is stdout, the file structure
         * may be shared with other processes and close(2) just
         * decreases the reference count.
         */
        if (out.fd == STDOUT_FILENO && ddop_fsync(out, out.fd) == -1
            && errno != EINVAL) {
                err(EXIT_FAILURE, "fsync stdout");
                /* NOTREACHED */
        }
        if (ddop_close(out, out.fd) == -1) {
                err(EXIT_FAILURE, "close");
                /* NOTREACHED */
        }
}

void
dd_out(int force)
{
        static int warned;
        int64_t cnt, n, nw;
        u_char *outp;

        /*
         * Write one or more blocks out.  The common case is writing a full
         * output block in a single write; increment the full block stats.
         * Otherwise, we're into partial block writes.  If a partial write,
         * and it's a character device, just warn.  If a tape device, quit.
         *
         * The partial writes represent two cases.  1: Where the input block
         * was less than expected so the output block was less than expected.
         * 2: Where the input block was the right size but we were forced to
         * write the block in multiple chunks.  The original versions of dd(1)
         * never wrote a block in more than a single write, so the latter case
         * never happened.
         *
         * One special case is if we're forced to do the write -- in that case
         * we play games with the buffer size, and it's usually a partial write.
         */
        outp = out.db;
        for (n = force ? out.dbcnt : out.dbsz;; n = out.dbsz) {
                for (cnt = n;; cnt -= nw) {

                        if (!force && ddflags & C_SPARSE) {
                                int sparse, i;
                                sparse = 1;     /* Is buffer sparse? */
                                for (i = 0; i < cnt; i++)
                                        if (outp[i] != 0) {
                                                sparse = 0;
                                                break;
                                        }
                                if (sparse) {
                                        pending += cnt;
                                        outp += cnt;
                                        nw = 0;
                                        break;
                                }
                        }
                        if (pending != 0) {
                                if (ddop_lseek(out,
                                    out.fd, pending, SEEK_CUR) == -1)
                                        err(EXIT_FAILURE, "%s: seek error creating sparse file",
                                            out.name);
                        }
                        nw = bwrite(&out, outp, cnt);
                        if (nw <= 0) {
                                if (nw == 0)
                                        errx(EXIT_FAILURE,
                                                "%s: end of device", out.name);
                                        /* NOTREACHED */
                                if (errno != EINTR)
                                        err(EXIT_FAILURE, "%s", out.name);
                                        /* NOTREACHED */
                                nw = 0;
                        }
                        if (pending) {
                                st.bytes += pending;
                                st.sparse += pending/out.dbsz;
                                st.out_full += pending/out.dbsz;
                                pending = 0;
                        }
                        outp += nw;
                        st.bytes += nw;
                        if (nw == n) {
                                if ((uint64_t)n != out.dbsz)
                                        ++st.out_part;
                                else
                                        ++st.out_full;
                                break;
                        }
                        ++st.out_part;
                        if (nw == cnt)
                                break;
                        if (out.flags & ISCHR && !warned) {
                                warned = 1;
                                warnx("%s: short write on character device", out.name);
                        }
                        if (out.flags & ISTAPE)
                                errx(EXIT_FAILURE,
                                        "%s: short write on tape device", out.name);
                                /* NOTREACHED */

                }
                if ((out.dbcnt -= n) < out.dbsz)
                        break;
        }

        /* Reassemble the output block. */
        if (out.dbcnt)
                (void)memmove(out.db, out.dbp - out.dbcnt, out.dbcnt);
        out.dbp = out.db + out.dbcnt;

        if (progress && (st.out_full + st.out_part) % progress == 0)
                (void)write(STDERR_FILENO, ".", 1);
}

/*
 * A protected against SIGINFO write
 */
ssize_t
bwrite(IO *io, const void *buf, size_t len)
{
        sigset_t oset;
        ssize_t rv;
        int oerrno;

        (void)sigprocmask(SIG_BLOCK, &infoset, &oset);
        rv = io->ops->op_write(io->fd, buf, len);
        oerrno = errno;
        (void)sigprocmask(SIG_SETMASK, &oset, NULL);
        errno = oerrno;
        return (rv);
}