crypto/external/bsd/heimdal/dist/tests/kdc/check-pkinit.in

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2006 - 2008 Kungliga Tekniska Högskolan
   4 # (Royal Institute of Technology, Stockholm, Sweden).
   5 # All rights reserved.
   6 #
   7 # Redistribution and use in source and binary forms, with or without
   8 # modification, are permitted provided that the following conditions
   9 # are met:
  10 #
  11 # 1. Redistributions of source code must retain the above copyright
  12 #    notice, this list of conditions and the following disclaimer.
  13 #
  14 # 2. Redistributions in binary form must reproduce the above copyright
  15 #    notice, this list of conditions and the following disclaimer in the
  16 #    documentation and/or other materials provided with the distribution.
  17 #
  18 # 3. Neither the name of the Institute nor the names of its contributors
  19 #    may be used to endorse or promote products derived from this software
  20 #    without specific prior written permission.
  21 #
  22 # THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
  23 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  24 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25 # ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
  26 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  27 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  28 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  29 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  30 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  31 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  32 # SUCH DAMAGE.
  33
  34 top_builddir="@top_builddir@"
  35 env_setup="@env_setup@"
  36 objdir="@objdir@"
  37
  38 testfailed="echo test failed; cat messages.log; exit 1"
  39
  40 . ${env_setup}
  41
  42 # If there is no useful db support compile in, disable test
  43 ${have_db} || exit 77
  44
  45 R=TEST.H5L.SE
  46
  47 port=@port@
  48
  49 kadmin="${kadmin} -l -r $R"
  50 kdc="${kdc} --addresses=localhost -P $port"
  51
  52 server=host/datan.test.h5l.se
  53 cache="FILE:${objdir}/cache.krb5"
  54 keyfile="${hx509_data}/key.der"
  55 keyfile2="${hx509_data}/key2.der"
  56
  57 kinit="${kinit} -c $cache ${afs_no_afslog}"
  58 kgetcred="${kgetcred} -c $cache"
  59 kdestroy="${kdestroy} -c $cache ${afs_no_unlog}"
  60
  61 KRB5_CONFIG="${objdir}/krb5-pkinit.conf"
  62 export KRB5_CONFIG
  63
  64 rsa=yes
  65 pkinit=no
  66 if ${hxtool} info | grep 'rsa: hx509 null RSA' > /dev/null ; then
  67     rsa=no
  68 fi
  69 if ${hxtool} info | grep 'rand: not available' > /dev/null ; then
  70     rsa=no
  71 fi
  72
  73 if ${kinit} --help 2>&1 | grep "CA certificates" > /dev/null; then
  74     pkinit=yes
  75 fi
  76
  77 # If we doesn't support pkinit and have RSA, give up
  78 if test "$pkinit" != yes -o "$rsa" != yes ; then
  79     exit 77
  80 fi
  81
  82
  83 rm -f current-db*
  84 rm -f out-*
  85 rm -f mkey.file*
  86
  87 > messages.log
  88
  89 echo Creating database
  90 ${kadmin} \
  91     init \
  92     --realm-max-ticket-life=1day \
  93     --realm-max-renewable-life=1month \
  94     ${R} || exit 1
  95
  96 ${kadmin} add -p foo --use-defaults foo@${R} || exit 1
  97 ${kadmin} add -p bar --use-defaults bar@${R} || exit 1
  98 ${kadmin} add -p baz --use-defaults baz@${R} || exit 1
  99 ${kadmin} modify --alias=baz2@test.h5l.se baz@${R} || exit 1
 100 ${kadmin} modify --pkinit-acl="CN=baz,DC=test,DC=h5l,DC=se" baz@${R} || exit 1
 101
 102 ${kadmin} add -p kaka --use-defaults ${server}@${R} || exit 1
 103
 104 echo "Doing database check"
 105 ${kadmin} check ${R} || exit 1
 106
 107 echo "Setting up certificates"
 108 ${hxtool} request-create \
 109          --subject="CN=kdc,DC=test,DC=h5l,DC=se" \
 110          --key=FILE:${keyfile2} \
 111          req-kdc.der || exit 1
 112 ${hxtool} request-create \
 113          --subject="CN=bar,DC=test,DC=h5l,DC=se" \
 114          --key=FILE:${keyfile2} \
 115          req-pkinit.der || exit 1
 116 ${hxtool} request-create \
 117          --subject="CN=baz,DC=test,DC=h5l,DC=se" \
 118          --key=FILE:${keyfile2} \
 119          req-pkinit2.der || exit 1
 120
 121 echo "issue self-signed ca cert"
 122 ${hxtool} issue-certificate \
 123           --self-signed \
 124           --issue-ca \
 125           --ca-private-key=FILE:${keyfile} \
 126           --subject="CN=CA,DC=test,DC=h5l,DC=se" \
 127           --certificate="FILE:ca.crt" || exit 1
 128
 129 echo "issue kdc certificate"
 130 ${hxtool} issue-certificate \
 131           --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
 132           --type="pkinit-kdc" \
 133           --pk-init-principal="krbtgt/TEST.H5L.SE@TEST.H5L.SE" \
 134           --req="PKCS10:req-kdc.der" \
 135           --certificate="FILE:kdc.crt" || exit 1
 136
 137 echo "issue user certificate (pkinit san)"
 138 ${hxtool} issue-certificate \
 139           --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
 140           --type="pkinit-client" \
 141           --pk-init-principal="bar@TEST.H5L.SE" \
 142           --req="PKCS10:req-pkinit.der" \
 143           --certificate="FILE:pkinit.crt" || exit 1
 144
 145 echo "issue user 2 certificate (no san)"
 146 ${hxtool} issue-certificate \
 147           --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
 148           --type="pkinit-client" \
 149           --req="PKCS10:req-pkinit2.der" \
 150           --certificate="FILE:pkinit2.crt" || exit 1
 151
 152 echo "issue user 3 certificate (ms san)"
 153 ${hxtool} issue-certificate \
 154           --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
 155           --type="pkinit-client" \
 156           --ms-upn="bar@test.h5l.se" \
 157           --req="PKCS10:req-pkinit2.der" \
 158           --certificate="FILE:pkinit3.crt" || exit 1
 159
 160 echo "issue user 3 certificate (ms san, baz2)"
 161 ${hxtool} issue-certificate \
 162           --ca-certificate=FILE:$objdir/ca.crt,${keyfile} \
 163           --type="pkinit-client" \
 164           --ms-upn="baz2@test.h5l.se" \
 165           --req="PKCS10:req-pkinit2.der" \
 166           --certificate="FILE:pkinit4.crt" || exit 1
 167
 168
 169 echo foo > ${objdir}/foopassword
 170
 171 echo Starting kdc
 172 ${kdc} &
 173 kdcpid=$!
 174
 175 sh ${wait_kdc}
 176 if [ "$?" != 0 ] ; then
 177     kill -9 ${kdcpid}
 178     exit 1
 179 fi
 180
 181 trap "kill -9 ${kdcpid}; echo signal killing kdc; cat ca.crt kdc.crt pkinit.crt ;exit 1;" EXIT
 182
 183 ec=0
 184
 185 echo "Trying pk-init (principal in cert)"; > messages.log
 186 base="${objdir}"
 187 ${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
 188         { ec=1 ; eval "${testfailed}"; }
 189 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 190 ${kdestroy}
 191
 192 echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
 193 ${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} foo@${R} || \
 194         { ec=1 ; eval "${testfailed}"; }
 195 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 196 ${kdestroy}
 197
 198 echo "Trying pk-init (principal subject in DB)"; > messages.log
 199 ${kinit} -C FILE:${base}/pkinit2.crt,${keyfile2} baz@${R} || \
 200         { ec=1 ; eval "${testfailed}"; }
 201 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 202 ${kdestroy}
 203
 204 echo "Trying pk-init (ms upn)"; > messages.log
 205 ${kinit} -C FILE:${base}/pkinit3.crt,${keyfile2} bar@${R} || \
 206         { ec=1 ; eval "${testfailed}"; }
 207 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 208 ${kdestroy}
 209
 210 echo "Trying pk-init (ms upn, enterprise)"; > messages.log
 211 ${kinit}  --canonicalize \
 212         -C FILE:${base}/pkinit4.crt,${keyfile2} baz2@test.h5l.se@${R} || \
 213         { ec=1 ; eval "${testfailed}"; }
 214 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 215 ${kdestroy}
 216
 217 echo "Trying pk-init (ms upn, enterprise, pk-enterprise)"; > messages.log
 218 ${kinit} --canonicalize \
 219         --pk-enterprise \
 220         -C FILE:${base}/pkinit4.crt,${keyfile2} ${R} || \
 221         { ec=1 ; eval "${testfailed}"; }
 222 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 223 ${kdestroy}
 224
 225 KRB5_CONFIG="${objdir}/krb5-pkinit-win.conf"
 226 export KRB5_CONFIG
 227
 228 echo "Duplicated tests, now in windows 2000 mode"
 229
 230 echo "Trying pk-init (principal in cert)"; > messages.log
 231 base="${objdir}"
 232 ${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} bar@${R} || \
 233         { ec=1 ; eval "${testfailed}"; }
 234 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 235 ${kdestroy}
 236
 237 echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
 238 ${kinit} -C FILE:${base}/pkinit.crt,${keyfile2} foo@${R} || \
 239         { ec=1 ; eval "${testfailed}"; }
 240 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 241 ${kdestroy}
 242
 243 echo "Trying pk-init (principal subject in DB)"; > messages.log
 244 ${kinit} -C FILE:${base}/pkinit2.crt,${keyfile2} baz@${R} || \
 245         { ec=1 ; eval "${testfailed}"; }
 246 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 247 ${kdestroy}
 248
 249 echo "Trying pk-init (ms upn)"; > messages.log
 250 ${kinit} -C FILE:${base}/pkinit3.crt,${keyfile2} bar@${R} || \
 251         { ec=1 ; eval "${testfailed}"; }
 252 ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 253 ${kdestroy}
 254
 255
 256 KRB5_CONFIG="${objdir}/krb5-pkinit.conf"
 257 export KRB5_CONFIG
 258
 259 echo "Trying PKCS11 support"
 260
 261 cat > test-rc-file.rc <<EOF
 262 certificate     cert    User certificate        FILE:${base}/pkinit.crt,${keyfile2}
 263 app-fatal       true
 264 EOF
 265
 266 SOFTPKCS11RC="test-rc-file.rc"
 267 export SOFTPKCS11RC
 268
 269 dir=${base}/../../lib/hx509
 270 file=
 271
 272 for a in libhx509.so .libs/libhx509.so libhx509.dylib .libs/libhx509.dylib ; do
 273     if [ -f $dir/$a ] ; then
 274         file=$dir/$a
 275         break
 276     fi
 277 done
 278
 279 if [ X"$file" != X -a @DLOPEN@ ] ; then
 280
 281     echo "Trying pk-init (principal in pki-mapping file) "; > messages.log
 282     ${kinit} -C PKCS11:${file} foo@${R} || \
 283         { ec=1 ; eval "${testfailed}"; }
 284     ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
 285     ${kdestroy}
 286
 287 fi
 288
 289
 290 echo "killing kdc (${kdcpid})"
 291 sh ${leaks_kill} kdc $kdcpid || exit 1
 292
 293 trap "" EXIT
 294
 295 exit $ec