external/bsd/flex/dist/Makefile

   1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
   2 # Makefile.  Generated from Makefile.in by configure.
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
   6 # Foundation, Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16
  17
  18 # This file is part of flex.
  19
  20 # Redistribution and use in source and binary forms, with or without
  21 # modification, are permitted provided that the following conditions
  22 # are met:
  23
  24 # 1. Redistributions of source code must retain the above copyright
  25 #    notice, this list of conditions and the following disclaimer.
  26 # 2. Redistributions in binary form must reproduce the above copyright
  27 #    notice, this list of conditions and the following disclaimer in the
  28 #    documentation and/or other materials provided with the distribution.
  29
  30 # Neither the name of the University nor the names of its contributors
  31 # may be used to endorse or promote products derived from this software
  32 # without specific prior written permission.
  33
  34 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
  35 # IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
  36 # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  37 # PURPOSE.
  38
  39 # Notes on building:
  40
  41 # Possible values for DEFS:
  42 #
  43 # By default, flex generates 8-bit scanners when using table compression,
  44 # and 7-bit scanners when using uncompressed tables (-f or -F options).
  45 # For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256"
  46 # to DEFS.
  47 #
  48 # For Vax/VMS, add "-DVMS" to DEFS.
  49 #
  50 # For MS-DOS, add "-DMS_DOS" to DEFS.  See the directory MISC/MSDOS for
  51 # additional info.
  52
  53
  54
  55
  56
  57 am__make_dryrun = \
  58   { \
  59     am__dry=no; \
  60     case $$MAKEFLAGS in \
  61       *\\[\ \   ]*) \
  62         echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
  63           | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
  64       *) \
  65         for am__flg in $$MAKEFLAGS; do \
  66           case $$am__flg in \
  67             *=*|--*) ;; \
  68             *n*) am__dry=yes; break;; \
  69           esac; \
  70         done;; \
  71     esac; \
  72     test $$am__dry = yes; \
  73   }
  74 pkgdatadir = $(datadir)/flex
  75 pkgincludedir = $(includedir)/flex
  76 pkglibdir = $(libdir)/flex
  77 pkglibexecdir = $(libexecdir)/flex
  78 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  79 install_sh_DATA = $(install_sh) -c -m 644
  80 install_sh_PROGRAM = $(install_sh) -c
  81 install_sh_SCRIPT = $(install_sh) -c
  82 INSTALL_HEADER = $(INSTALL_DATA)
  83 transform = $(program_transform_name)
  84 NORMAL_INSTALL = :
  85 PRE_INSTALL = :
  86 POST_INSTALL = :
  87 NORMAL_UNINSTALL = :
  88 PRE_UNINSTALL = :
  89 POST_UNINSTALL = :
  90 build_triplet = x86_64-unknown-netbsd7.99.1
  91 host_triplet = x86_64-unknown-netbsd7.99.1
  92 bin_PROGRAMS = flex$(EXEEXT)
  93 subdir = .
  94 DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
  95         $(include_HEADERS) $(noinst_HEADERS) $(srcdir)/Makefile.am \
  96         $(srcdir)/Makefile.in $(srcdir)/conf.in \
  97         $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
  98         INSTALL NEWS THANKS TODO compile config.guess config.rpath \
  99         config.sub depcomp install-sh ltmain.sh missing parse.c \
 100         parse.h scan.c ylwrap
 101 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 102 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
 103         $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
 104         $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
 105         $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
 106         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 107         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
 108         $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
 109         $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
 110 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 111         $(ACLOCAL_M4)
 112 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 113  configure.lineno config.status.lineno
 114 mkinstalldirs = $(install_sh) -d
 115 CONFIG_HEADER = config.h
 116 CONFIG_CLEAN_FILES =
 117 CONFIG_CLEAN_VPATH_FILES =
 118 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 119 am__vpath_adj = case $$p in \
 120     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 121     *) f=$$p;; \
 122   esac;
 123 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 124 am__install_max = 40
 125 am__nobase_strip_setup = \
 126   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 127 am__nobase_strip = \
 128   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 129 am__nobase_list = $(am__nobase_strip_setup); \
 130   for p in $$list; do echo "$$p $$p"; done | \
 131   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 132   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 133     if (++n[$$2] == $(am__install_max)) \
 134       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 135     END { for (dir in files) print dir, files[dir] }'
 136 am__base_list = \
 137   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 138   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 139 am__uninstall_files_from_dir = { \
 140   test -z "$$files" \
 141     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 142     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 143          $(am__cd) "$$dir" && rm -f $$files; }; \
 144   }
 145 am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
 146         "$(DESTDIR)$(docdir)" "$(DESTDIR)$(includedir)"
 147 LTLIBRARIES = $(lib_LTLIBRARIES)
 148 libfl_la_LIBADD =
 149 am_libfl_la_OBJECTS = libmain.lo libyywrap.lo
 150 libfl_la_OBJECTS = $(am_libfl_la_OBJECTS)
 151 libfl_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 152         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libfl_la_LDFLAGS) \
 153         $(LDFLAGS) -o $@
 154 libfl_pic_la_LIBADD =
 155 am_libfl_pic_la_OBJECTS = libmain.lo libyywrap.lo
 156 libfl_pic_la_OBJECTS = $(am_libfl_pic_la_OBJECTS)
 157 libfl_pic_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 158         $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 159         $(libfl_pic_la_LDFLAGS) $(LDFLAGS) -o $@
 160 PROGRAMS = $(bin_PROGRAMS)
 161 am_flex_OBJECTS = ccl.$(OBJEXT) dfa.$(OBJEXT) ecs.$(OBJEXT) \
 162         scanflags.$(OBJEXT) gen.$(OBJEXT) main.$(OBJEXT) \
 163         misc.$(OBJEXT) nfa.$(OBJEXT) parse.$(OBJEXT) scan.$(OBJEXT) \
 164         skel.$(OBJEXT) sym.$(OBJEXT) tblcmp.$(OBJEXT) yylex.$(OBJEXT) \
 165         options.$(OBJEXT) scanopt.$(OBJEXT) buf.$(OBJEXT) \
 166         tables.$(OBJEXT) tables_shared.$(OBJEXT) filter.$(OBJEXT) \
 167         regex.$(OBJEXT)
 168 flex_OBJECTS = $(am_flex_OBJECTS)
 169 flex_LDADD = $(LDADD)
 170 flex_DEPENDENCIES = lib/libcompat.la
 171 DEFAULT_INCLUDES = -I.
 172 depcomp = $(SHELL) $(top_srcdir)/depcomp
 173 am__depfiles_maybe = depfiles
 174 am__mv = mv -f
 175 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 176         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 177 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 178         --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 179         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 180 CCLD = $(CC)
 181 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 182         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 183         $(LDFLAGS) -o $@
 184 LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS)
 185 LTLEXCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 186         --mode=compile $(LEX) $(AM_LFLAGS) $(LFLAGS)
 187 YLWRAP = $(top_srcdir)/ylwrap
 188 YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
 189 LTYACCCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 190         --mode=compile $(YACC) $(AM_YFLAGS) $(YFLAGS)
 191 SOURCES = $(libfl_la_SOURCES) $(libfl_pic_la_SOURCES) $(flex_SOURCES)
 192 DIST_SOURCES = $(libfl_la_SOURCES) $(libfl_pic_la_SOURCES) \
 193         $(flex_SOURCES)
 194 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 195         html-recursive info-recursive install-data-recursive \
 196         install-dvi-recursive install-exec-recursive \
 197         install-html-recursive install-info-recursive \
 198         install-pdf-recursive install-ps-recursive install-recursive \
 199         installcheck-recursive installdirs-recursive pdf-recursive \
 200         ps-recursive uninstall-recursive
 201 am__can_run_installinfo = \
 202   case $$AM_UPDATE_INFO_DIR in \
 203     n|no|NO) false;; \
 204     *) (install-info --version) >/dev/null 2>&1;; \
 205   esac
 206 DATA = $(dist_doc_DATA)
 207 HEADERS = $(include_HEADERS) $(noinst_HEADERS)
 208 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 209   distclean-recursive maintainer-clean-recursive
 210 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 211         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 212         distdir dist dist-all distcheck
 213 ETAGS = etags
 214 CTAGS = ctags
 215 DIST_SUBDIRS = $(SUBDIRS)
 216 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 217 distdir = $(PACKAGE)-$(VERSION)
 218 top_distdir = $(distdir)
 219 am__remove_distdir = \
 220   if test -d "$(distdir)"; then \
 221     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 222       && rm -rf "$(distdir)" \
 223       || { sleep 5 && rm -rf "$(distdir)"; }; \
 224   else :; fi
 225 am__relativize = \
 226   dir0=`pwd`; \
 227   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 228   sed_rest='s,^[^/]*/*,,'; \
 229   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 230   sed_butlast='s,/*[^/]*$$,,'; \
 231   while test -n "$$dir1"; do \
 232     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 233     if test "$$first" != "."; then \
 234       if test "$$first" = ".."; then \
 235         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 236         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 237       else \
 238         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 239         if test "$$first2" = "$$first"; then \
 240           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 241         else \
 242           dir2="../$$dir2"; \
 243         fi; \
 244         dir0="$$dir0"/"$$first"; \
 245       fi; \
 246     fi; \
 247     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 248   done; \
 249   reldir="$$dir2"
 250 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 $(distdir).tar.xz
 251 GZIP_ENV = --best
 252 distuninstallcheck_listfiles = find . -type f -print
 253 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 254   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 255 distcleancheck_listfiles = find . -type f -print
 256 ACLOCAL = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run aclocal-1.11
 257 ALLOCA =
 258 AMTAR = $${TAR-tar}
 259 AR = ar
 260 AUTOCONF = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run autoconf
 261 AUTOHEADER = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run autoheader
 262 AUTOMAKE = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run automake-1.11
 263 AWK = gawk
 264 BISON = /usr/pkg/bin/bison
 265 CC = gcc
 266 CCDEPMODE = depmode=gcc3
 267 CFLAGS = -g -O2
 268 CPP = gcc -E
 269 CPPFLAGS =
 270 CXX = g++
 271 CXXCPP = g++ -E
 272 CXXDEPMODE = depmode=gcc3
 273 CXXFLAGS = -g -O2
 274 CYGPATH_W = echo
 275 DEFS = -DHAVE_CONFIG_H
 276 DEPDIR = .deps
 277 DLLTOOL = false
 278 DSYMUTIL =
 279 DUMPBIN =
 280 ECHO_C =
 281 ECHO_N = -n
 282 ECHO_T =
 283 EGREP = /usr/bin/grep -E
 284 EXEEXT =
 285 FGREP = /usr/bin/grep -F
 286 GETTEXT_MACRO_VERSION = 0.18
 287 GMSGFMT = /usr/pkg/bin/msgfmt
 288 GMSGFMT_015 = /usr/pkg/bin/msgfmt
 289 GREP = /usr/bin/grep
 290 HELP2MAN = /usr/pkg/bin/help2man
 291 INDENT = /usr/bin/indent
 292 INSTALL = /usr/bin/install -c
 293 INSTALL_DATA = ${INSTALL} -m 644
 294 INSTALL_PROGRAM = ${INSTALL}
 295 INSTALL_SCRIPT = ${INSTALL}
 296 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
 297 INTLLIBS =
 298 INTL_MACOSX_LIBS =
 299 LD = /usr/bin/ld
 300 LDFLAGS =
 301 LEX = flex
 302 LEXLIB = -lfl
 303 LEX_OUTPUT_ROOT = lex.yy
 304 LIBICONV =
 305 LIBINTL =
 306 LIBOBJS =
 307 LIBS =  -lm
 308 LIBTOOL = $(SHELL) $(top_builddir)/libtool
 309 LIPO =
 310 LN_S = ln -s
 311 LTLIBICONV =
 312 LTLIBINTL =
 313 LTLIBOBJS =
 314 M4 = /usr/pkg/bin/gm4
 315 MAKEINFO = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run makeinfo
 316 MANIFEST_TOOL = :
 317 MKDIR_P = ./install-sh -c -d
 318 MSGFMT = /usr/pkg/bin/msgfmt
 319 MSGFMT_015 = /usr/pkg/bin/msgfmt
 320 MSGMERGE = /usr/pkg/bin/msgmerge
 321 NM = /usr/bin/nm -B
 322 NMEDIT =
 323 OBJDUMP = objdump
 324 OBJEXT = o
 325 OTOOL =
 326 OTOOL64 =
 327 PACKAGE = flex
 328 PACKAGE_BUGREPORT = flex-help@lists.sourceforge.net
 329 PACKAGE_NAME = the fast lexical analyser generator
 330 PACKAGE_STRING = the fast lexical analyser generator 2.5.39
 331 PACKAGE_TARNAME = flex
 332 PACKAGE_URL =
 333 PACKAGE_VERSION = 2.5.39
 334 PATH_SEPARATOR = :
 335 POSUB =
 336 RANLIB = ranlib
 337 SED = /usr/pkg/bin/gsed
 338 SET_MAKE =
 339 SHARED_VERSION_INFO = 2:0:0
 340 SHELL = /bin/sh
 341 STRIP = strip
 342 USE_NLS = no
 343 VERSION = 2.5.39
 344 XGETTEXT = /usr/pkg/bin/xgettext
 345 XGETTEXT_015 = /usr/pkg/bin/xgettext
 346 XGETTEXT_EXTRA_OPTIONS =
 347 YACC = bison -y
 348 YFLAGS =
 349 abs_builddir = /usr/src/external/bsd/flex/flex-2.5.39
 350 abs_srcdir = /usr/src/external/bsd/flex/flex-2.5.39
 351 abs_top_builddir = /usr/src/external/bsd/flex/flex-2.5.39
 352 abs_top_srcdir = /usr/src/external/bsd/flex/flex-2.5.39
 353 ac_ct_AR = ar
 354 ac_ct_CC = gcc
 355 ac_ct_CXX = g++
 356 ac_ct_DUMPBIN =
 357 am__include = include
 358 am__leading_dot = .
 359 am__quote =
 360 am__tar = $${TAR-tar} chof - "$$tardir"
 361 am__untar = $${TAR-tar} xf -
 362 bindir = ${exec_prefix}/bin
 363 build = x86_64-unknown-netbsd7.99.1
 364 build_alias =
 365 build_cpu = x86_64
 366 build_os = netbsd7.99.1
 367 build_vendor = unknown
 368 builddir = .
 369 datadir = ${datarootdir}
 370 datarootdir = ${prefix}/share
 371 docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
 372 dvidir = ${docdir}
 373 exec_prefix = ${prefix}
 374 host = x86_64-unknown-netbsd7.99.1
 375 host_alias =
 376 host_cpu = x86_64
 377 host_os = netbsd7.99.1
 378 host_vendor = unknown
 379 htmldir = ${docdir}
 380 includedir = ${prefix}/include
 381 infodir = ${datarootdir}/info
 382 install_sh = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/install-sh
 383 libdir = ${exec_prefix}/lib
 384 libexecdir = ${exec_prefix}/libexec
 385 localedir = $(datadir)/locale
 386 localstatedir = ${prefix}/var
 387 mandir = ${datarootdir}/man
 388 mkdir_p = $(top_builddir)/./install-sh -c -d
 389 oldincludedir = /usr/include
 390 pdfdir = ${docdir}
 391 prefix = /usr/local
 392 program_transform_name = s,x,x,
 393 psdir = ${docdir}
 394 sbindir = ${exec_prefix}/sbin
 395 sharedstatedir = ${prefix}/com
 396 srcdir = .
 397 sysconfdir = ${prefix}/etc
 398 target_alias =
 399 top_build_prefix =
 400 top_builddir = .
 401 top_srcdir = .
 402 AM_YFLAGS = -d
 403 ACLOCAL_AMFLAGS = -I m4
 404 m4 = /usr/pkg/bin/gm4
 405 indent = /usr/bin/indent
 406 lib_LTLIBRARIES = \
 407         libfl.la \
 408         libfl_pic.la
 409
 410 flex_SOURCES = \
 411         ccl.c \
 412         dfa.c \
 413         ecs.c \
 414         scanflags.c \
 415         gen.c \
 416         main.c \
 417         misc.c \
 418         nfa.c \
 419         parse.y \
 420         scan.l \
 421         skel.c \
 422         sym.c \
 423         tblcmp.c \
 424         yylex.c \
 425         options.c \
 426         scanopt.c \
 427         buf.c \
 428         tables.c \
 429         tables_shared.c \
 430         filter.c \
 431         regex.c
 432
 433 LDADD = lib/libcompat.la
 434 libfl_la_SOURCES = \
 435         libmain.c \
 436         libyywrap.c
 437
 438 libfl_la_LDFLAGS = -no-undefined -version-info 2:0:0
 439 libfl_pic_la_SOURCES = \
 440         libmain.c \
 441         libyywrap.c
 442
 443 libfl_pic_la_LDFLAGS = -no-undefined -version-info 2:0:0
 444 noinst_HEADERS = \
 445         flexdef.h \
 446         flexint.h \
 447         version.h \
 448         options.h \
 449         scanopt.h \
 450         tables.h \
 451         tables_shared.h
 452
 453 include_HEADERS = \
 454         FlexLexer.h
 455
 456 dist_doc_DATA = \
 457         AUTHORS \
 458         COPYING \
 459         NEWS \
 460         ONEWS \
 461         README \
 462         TODO
 463
 464 EXTRA_DIST = \
 465         .indent.pro \
 466         ABOUT-NLS \
 467         INSTALL \
 468         autogen.sh \
 469         flex.skl \
 470         mkskel.sh \
 471         config.rpath \
 472         gettext.h
 473
 474 BUILT_SOURCES = \
 475         skel.c
 476
 477 SUBDIRS = \
 478         lib \
 479         . \
 480         doc \
 481         examples \
 482         po \
 483         tests
 484
 485 AM_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" -I$(top_srcdir)/intl
 486
 487 # Run GNU indent on sources. Don't run this unless all the sources compile cleanly.
 488 #
 489 # Whole idea:
 490 #   1. Check for .indent.pro, otherwise indent will use unknown
 491 #      settings, or worse, the GNU defaults.)
 492 #   2. Check that this is GNU indent.
 493 #   3. Make sure to process only the NON-generated .c and .h files.
 494 #   4. Run indent twice per file. The first time is a test.
 495 #      Otherwise, indent overwrites your file even if it fails!
 496 indentfiles = \
 497         buf.c \
 498         ccl.c \
 499         dfa.c \
 500         ecs.c \
 501         scanflags.c \
 502         filter.c \
 503         flexdef.h \
 504         gen.c \
 505         libmain.c \
 506         libyywrap.c \
 507         main.c \
 508         misc.c \
 509         nfa.c \
 510         options.c \
 511         options.h \
 512         regex.c \
 513         scanopt.c \
 514         scanopt.h \
 515         sym.c \
 516         tables.c \
 517         tables.h \
 518         tables_shared.c \
 519         tables_shared.h \
 520         tblcmp.c
 521
 522 all: $(BUILT_SOURCES) config.h
 523         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 524
 525 .SUFFIXES:
 526 .SUFFIXES: .c .l .lo .o .obj .y
 527 am--refresh: Makefile
 528         @:
 529 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 530         @for dep in $?; do \
 531           case '$(am__configure_deps)' in \
 532             *$$dep*) \
 533               echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
 534               $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
 535                 && exit 0; \
 536               exit 1;; \
 537           esac; \
 538         done; \
 539         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 540         $(am__cd) $(top_srcdir) && \
 541           $(AUTOMAKE) --gnu Makefile
 542 .PRECIOUS: Makefile
 543 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 544         @case '$?' in \
 545           *config.status*) \
 546             echo ' $(SHELL) ./config.status'; \
 547             $(SHELL) ./config.status;; \
 548           *) \
 549             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 550             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 551         esac;
 552
 553 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 554         $(SHELL) ./config.status --recheck
 555
 556 $(top_srcdir)/configure:  $(am__configure_deps)
 557         $(am__cd) $(srcdir) && $(AUTOCONF)
 558 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 559         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 560 $(am__aclocal_m4_deps):
 561
 562 config.h: stamp-h1
 563         @if test ! -f $@; then rm -f stamp-h1; else :; fi
 564         @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 565
 566 stamp-h1: $(srcdir)/conf.in $(top_builddir)/config.status
 567         @rm -f stamp-h1
 568         cd $(top_builddir) && $(SHELL) ./config.status config.h
 569 $(srcdir)/conf.in:  $(am__configure_deps)
 570         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 571         rm -f stamp-h1
 572         touch $@
 573
 574 distclean-hdr:
 575         -rm -f config.h stamp-h1
 576 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 577         @$(NORMAL_INSTALL)
 578         @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
 579         list2=; for p in $$list; do \
 580           if test -f $$p; then \
 581             list2="$$list2 $$p"; \
 582           else :; fi; \
 583         done; \
 584         test -z "$$list2" || { \
 585           echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
 586           $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
 587           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
 588           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
 589         }
 590
 591 uninstall-libLTLIBRARIES:
 592         @$(NORMAL_UNINSTALL)
 593         @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
 594         for p in $$list; do \
 595           $(am__strip_dir) \
 596           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
 597           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
 598         done
 599
 600 clean-libLTLIBRARIES:
 601         -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
 602         @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 603           dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 604           test "$$dir" != "$$p" || dir=.; \
 605           echo "rm -f \"$${dir}/so_locations\""; \
 606           rm -f "$${dir}/so_locations"; \
 607         done
 608 libfl.la: $(libfl_la_OBJECTS) $(libfl_la_DEPENDENCIES) $(EXTRA_libfl_la_DEPENDENCIES)
 609         $(libfl_la_LINK) -rpath $(libdir) $(libfl_la_OBJECTS) $(libfl_la_LIBADD) $(LIBS)
 610 libfl_pic.la: $(libfl_pic_la_OBJECTS) $(libfl_pic_la_DEPENDENCIES) $(EXTRA_libfl_pic_la_DEPENDENCIES)
 611         $(libfl_pic_la_LINK) -rpath $(libdir) $(libfl_pic_la_OBJECTS) $(libfl_pic_la_LIBADD) $(LIBS)
 612 install-binPROGRAMS: $(bin_PROGRAMS)
 613         @$(NORMAL_INSTALL)
 614         @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 615         if test -n "$$list"; then \
 616           echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
 617           $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
 618         fi; \
 619         for p in $$list; do echo "$$p $$p"; done | \
 620         sed 's/$(EXEEXT)$$//' | \
 621         while read p p1; do if test -f $$p || test -f $$p1; \
 622           then echo "$$p"; echo "$$p"; else :; fi; \
 623         done | \
 624         sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
 625             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 626         sed 'N;N;N;s,\n, ,g' | \
 627         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 628           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 629             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 630             else { print "f", $$3 "/" $$4, $$1; } } \
 631           END { for (d in files) print "f", d, files[d] }' | \
 632         while read type dir files; do \
 633             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 634             test -z "$$files" || { \
 635             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
 636             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
 637             } \
 638         ; done
 639
 640 uninstall-binPROGRAMS:
 641         @$(NORMAL_UNINSTALL)
 642         @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 643         files=`for p in $$list; do echo "$$p"; done | \
 644           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 645               -e 's/$$/$(EXEEXT)/' `; \
 646         test -n "$$list" || exit 0; \
 647         echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
 648         cd "$(DESTDIR)$(bindir)" && rm -f $$files
 649
 650 clean-binPROGRAMS:
 651         @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
 652         echo " rm -f" $$list; \
 653         rm -f $$list || exit $$?; \
 654         test -n "$(EXEEXT)" || exit 0; \
 655         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 656         echo " rm -f" $$list; \
 657         rm -f $$list
 658
 659 installcheck-binPROGRAMS: $(bin_PROGRAMS)
 660         bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \
 661           case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
 662            *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
 663           esac; \
 664           f=`echo "$$p" | \
 665              sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
 666           for opt in --help --version; do \
 667             if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
 668                  2>c$${pid}_.err </dev/null \
 669                  && test -n "`cat c$${pid}_.out`" \
 670                  && test -z "`cat c$${pid}_.err`"; then :; \
 671             else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
 672           done; \
 673         done; rm -f c$${pid}_.???; exit $$bad
 674 parse.h: parse.c
 675         @if test ! -f $@; then rm -f parse.c; else :; fi
 676         @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) parse.c; else :; fi
 677 flex$(EXEEXT): $(flex_OBJECTS) $(flex_DEPENDENCIES) $(EXTRA_flex_DEPENDENCIES)
 678         @rm -f flex$(EXEEXT)
 679         $(LINK) $(flex_OBJECTS) $(flex_LDADD) $(LIBS)
 680
 681 mostlyclean-compile:
 682         -rm -f *.$(OBJEXT)
 683
 684 distclean-compile:
 685         -rm -f *.tab.c
 686
 687 include ./$(DEPDIR)/buf.Po
 688 include ./$(DEPDIR)/ccl.Po
 689 include ./$(DEPDIR)/dfa.Po
 690 include ./$(DEPDIR)/ecs.Po
 691 include ./$(DEPDIR)/filter.Po
 692 include ./$(DEPDIR)/gen.Po
 693 include ./$(DEPDIR)/libmain.Plo
 694 include ./$(DEPDIR)/libyywrap.Plo
 695 include ./$(DEPDIR)/main.Po
 696 include ./$(DEPDIR)/misc.Po
 697 include ./$(DEPDIR)/nfa.Po
 698 include ./$(DEPDIR)/options.Po
 699 include ./$(DEPDIR)/parse.Po
 700 include ./$(DEPDIR)/regex.Po
 701 include ./$(DEPDIR)/scan.Po
 702 include ./$(DEPDIR)/scanflags.Po
 703 include ./$(DEPDIR)/scanopt.Po
 704 include ./$(DEPDIR)/skel.Po
 705 include ./$(DEPDIR)/sym.Po
 706 include ./$(DEPDIR)/tables.Po
 707 include ./$(DEPDIR)/tables_shared.Po
 708 include ./$(DEPDIR)/tblcmp.Po
 709 include ./$(DEPDIR)/yylex.Po
 710
 711 .c.o:
 712         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 713         $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 714 #       source='$<' object='$@' libtool=no \
 715 #       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
 716 #       $(COMPILE) -c $<
 717
 718 .c.obj:
 719         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 720         $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 721 #       source='$<' object='$@' libtool=no \
 722 #       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
 723 #       $(COMPILE) -c `$(CYGPATH_W) '$<'`
 724
 725 .c.lo:
 726         $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 727         $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 728 #       source='$<' object='$@' libtool=yes \
 729 #       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
 730 #       $(LTCOMPILE) -c -o $@ $<
 731
 732 .l.c:
 733         $(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
 734
 735 .y.c:
 736         $(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h y.output $*.output -- $(YACCCOMPILE)
 737
 738 mostlyclean-libtool:
 739         -rm -f *.lo
 740
 741 clean-libtool:
 742         -rm -rf .libs _libs
 743
 744 distclean-libtool:
 745         -rm -f libtool config.lt
 746 install-dist_docDATA: $(dist_doc_DATA)
 747         @$(NORMAL_INSTALL)
 748         @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
 749         if test -n "$$list"; then \
 750           echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
 751           $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
 752         fi; \
 753         for p in $$list; do \
 754           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 755           echo "$$d$$p"; \
 756         done | $(am__base_list) | \
 757         while read files; do \
 758           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
 759           $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
 760         done
 761
 762 uninstall-dist_docDATA:
 763         @$(NORMAL_UNINSTALL)
 764         @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
 765         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 766         dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
 767 install-includeHEADERS: $(include_HEADERS)
 768         @$(NORMAL_INSTALL)
 769         @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
 770         if test -n "$$list"; then \
 771           echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
 772           $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
 773         fi; \
 774         for p in $$list; do \
 775           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 776           echo "$$d$$p"; \
 777         done | $(am__base_list) | \
 778         while read files; do \
 779           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
 780           $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
 781         done
 782
 783 uninstall-includeHEADERS:
 784         @$(NORMAL_UNINSTALL)
 785         @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
 786         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 787         dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
 788
 789 # This directory's subdirectories are mostly independent; you can cd
 790 # into them and run `make' without going through this Makefile.
 791 # To change the values of `make' variables: instead of editing Makefiles,
 792 # (1) if the variable is set in `config.status', edit `config.status'
 793 #     (which will cause the Makefiles to be regenerated when you run `make');
 794 # (2) otherwise, pass the desired values on the `make' command line.
 795 $(RECURSIVE_TARGETS):
 796         @fail= failcom='exit 1'; \
 797         for f in x $$MAKEFLAGS; do \
 798           case $$f in \
 799             *=* | --[!k]*);; \
 800             *k*) failcom='fail=yes';; \
 801           esac; \
 802         done; \
 803         dot_seen=no; \
 804         target=`echo $@ | sed s/-recursive//`; \
 805         list='$(SUBDIRS)'; for subdir in $$list; do \
 806           echo "Making $$target in $$subdir"; \
 807           if test "$$subdir" = "."; then \
 808             dot_seen=yes; \
 809             local_target="$$target-am"; \
 810           else \
 811             local_target="$$target"; \
 812           fi; \
 813           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 814           || eval $$failcom; \
 815         done; \
 816         if test "$$dot_seen" = "no"; then \
 817           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 818         fi; test -z "$$fail"
 819
 820 $(RECURSIVE_CLEAN_TARGETS):
 821         @fail= failcom='exit 1'; \
 822         for f in x $$MAKEFLAGS; do \
 823           case $$f in \
 824             *=* | --[!k]*);; \
 825             *k*) failcom='fail=yes';; \
 826           esac; \
 827         done; \
 828         dot_seen=no; \
 829         case "$@" in \
 830           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 831           *) list='$(SUBDIRS)' ;; \
 832         esac; \
 833         rev=''; for subdir in $$list; do \
 834           if test "$$subdir" = "."; then :; else \
 835             rev="$$subdir $$rev"; \
 836           fi; \
 837         done; \
 838         rev="$$rev ."; \
 839         target=`echo $@ | sed s/-recursive//`; \
 840         for subdir in $$rev; do \
 841           echo "Making $$target in $$subdir"; \
 842           if test "$$subdir" = "."; then \
 843             local_target="$$target-am"; \
 844           else \
 845             local_target="$$target"; \
 846           fi; \
 847           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 848           || eval $$failcom; \
 849         done && test -z "$$fail"
 850 tags-recursive:
 851         list='$(SUBDIRS)'; for subdir in $$list; do \
 852           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 853         done
 854 ctags-recursive:
 855         list='$(SUBDIRS)'; for subdir in $$list; do \
 856           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 857         done
 858
 859 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 860         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 861         unique=`for i in $$list; do \
 862             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 863           done | \
 864           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 865               END { if (nonempty) { for (i in files) print i; }; }'`; \
 866         mkid -fID $$unique
 867 tags: TAGS
 868
 869 TAGS: tags-recursive $(HEADERS) $(SOURCES) conf.in $(TAGS_DEPENDENCIES) \
 870                 $(TAGS_FILES) $(LISP)
 871         set x; \
 872         here=`pwd`; \
 873         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 874           include_option=--etags-include; \
 875           empty_fix=.; \
 876         else \
 877           include_option=--include; \
 878           empty_fix=; \
 879         fi; \
 880         list='$(SUBDIRS)'; for subdir in $$list; do \
 881           if test "$$subdir" = .; then :; else \
 882             test ! -f $$subdir/TAGS || \
 883               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 884           fi; \
 885         done; \
 886         list='$(SOURCES) $(HEADERS) conf.in $(LISP) $(TAGS_FILES)'; \
 887         unique=`for i in $$list; do \
 888             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 889           done | \
 890           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 891               END { if (nonempty) { for (i in files) print i; }; }'`; \
 892         shift; \
 893         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 894           test -n "$$unique" || unique=$$empty_fix; \
 895           if test $$# -gt 0; then \
 896             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 897               "$$@" $$unique; \
 898           else \
 899             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 900               $$unique; \
 901           fi; \
 902         fi
 903 ctags: CTAGS
 904 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) conf.in $(TAGS_DEPENDENCIES) \
 905                 $(TAGS_FILES) $(LISP)
 906         list='$(SOURCES) $(HEADERS) conf.in $(LISP) $(TAGS_FILES)'; \
 907         unique=`for i in $$list; do \
 908             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 909           done | \
 910           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 911               END { if (nonempty) { for (i in files) print i; }; }'`; \
 912         test -z "$(CTAGS_ARGS)$$unique" \
 913           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 914              $$unique
 915
 916 GTAGS:
 917         here=`$(am__cd) $(top_builddir) && pwd` \
 918           && $(am__cd) $(top_srcdir) \
 919           && gtags -i $(GTAGS_ARGS) "$$here"
 920
 921 distclean-tags:
 922         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 923
 924 distdir: $(DISTFILES)
 925         @case `sed 15q $(srcdir)/NEWS` in \
 926         *"$(VERSION)"*) : ;; \
 927         *) \
 928           echo "NEWS not updated; not releasing" 1>&2; \
 929           exit 1;; \
 930         esac
 931         $(am__remove_distdir)
 932         test -d "$(distdir)" || mkdir "$(distdir)"
 933         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 934         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 935         list='$(DISTFILES)'; \
 936           dist_files=`for file in $$list; do echo $$file; done | \
 937           sed -e "s|^$$srcdirstrip/||;t" \
 938               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 939         case $$dist_files in \
 940           */*) $(MKDIR_P) `echo "$$dist_files" | \
 941                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 942                            sort -u` ;; \
 943         esac; \
 944         for file in $$dist_files; do \
 945           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 946           if test -d $$d/$$file; then \
 947             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 948             if test -d "$(distdir)/$$file"; then \
 949               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 950             fi; \
 951             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 952               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 953               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 954             fi; \
 955             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 956           else \
 957             test -f "$(distdir)/$$file" \
 958             || cp -p $$d/$$file "$(distdir)/$$file" \
 959             || exit 1; \
 960           fi; \
 961         done
 962         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 963           if test "$$subdir" = .; then :; else \
 964             $(am__make_dryrun) \
 965               || test -d "$(distdir)/$$subdir" \
 966               || $(MKDIR_P) "$(distdir)/$$subdir" \
 967               || exit 1; \
 968             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 969             $(am__relativize); \
 970             new_distdir=$$reldir; \
 971             dir1=$$subdir; dir2="$(top_distdir)"; \
 972             $(am__relativize); \
 973             new_top_distdir=$$reldir; \
 974             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 975             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 976             ($(am__cd) $$subdir && \
 977               $(MAKE) $(AM_MAKEFLAGS) \
 978                 top_distdir="$$new_top_distdir" \
 979                 distdir="$$new_distdir" \
 980                 am__remove_distdir=: \
 981                 am__skip_length_check=: \
 982                 am__skip_mode_fix=: \
 983                 distdir) \
 984               || exit 1; \
 985           fi; \
 986         done
 987         -test -n "$(am__skip_mode_fix)" \
 988         || find "$(distdir)" -type d ! -perm -755 \
 989                 -exec chmod u+rwx,go+rx {} \; -o \
 990           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 991           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 992           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 993         || chmod -R a+r "$(distdir)"
 994 dist-gzip: distdir
 995         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 996         $(am__remove_distdir)
 997 dist-bzip2: distdir
 998         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 999         $(am__remove_distdir)
1000
1001 dist-lzip: distdir
1002         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
1003         $(am__remove_distdir)
1004
1005 dist-lzma: distdir
1006         tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
1007         $(am__remove_distdir)
1008 dist-xz: distdir
1009         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
1010         $(am__remove_distdir)
1011
1012 dist-tarZ: distdir
1013         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1014         $(am__remove_distdir)
1015
1016 dist-shar: distdir
1017         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1018         $(am__remove_distdir)
1019
1020 dist-zip: distdir
1021         -rm -f $(distdir).zip
1022         zip -rq $(distdir).zip $(distdir)
1023         $(am__remove_distdir)
1024
1025 dist dist-all: distdir
1026         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1027         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
1028         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
1029         $(am__remove_distdir)
1030
1031 # This target untars the dist file and tries a VPATH configuration.  Then
1032 # it guarantees that the distribution is self-contained by making another
1033 # tarfile.
1034 distcheck: dist
1035         case '$(DIST_ARCHIVES)' in \
1036         *.tar.gz*) \
1037           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
1038         *.tar.bz2*) \
1039           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1040         *.tar.lzma*) \
1041           lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
1042         *.tar.lz*) \
1043           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1044         *.tar.xz*) \
1045           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1046         *.tar.Z*) \
1047           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1048         *.shar.gz*) \
1049           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
1050         *.zip*) \
1051           unzip $(distdir).zip ;;\
1052         esac
1053         chmod -R a-w $(distdir); chmod u+w $(distdir)
1054         mkdir $(distdir)/_build
1055         mkdir $(distdir)/_inst
1056         chmod a-w $(distdir)
1057         test -d $(distdir)/_build || exit 0; \
1058         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1059           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1060           && am__cwd=`pwd` \
1061           && $(am__cd) $(distdir)/_build \
1062           && ../configure --srcdir=.. --prefix="$$dc_install_base" \
1063             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1064             $(DISTCHECK_CONFIGURE_FLAGS) \
1065           && $(MAKE) $(AM_MAKEFLAGS) \
1066           && $(MAKE) $(AM_MAKEFLAGS) dvi \
1067           && $(MAKE) $(AM_MAKEFLAGS) check \
1068           && $(MAKE) $(AM_MAKEFLAGS) install \
1069           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1070           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1071           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1072                 distuninstallcheck \
1073           && chmod -R a-w "$$dc_install_base" \
1074           && ({ \
1075                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1076                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1077                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1078                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1079                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1080               } || { rm -rf "$$dc_destdir"; exit 1; }) \
1081           && rm -rf "$$dc_destdir" \
1082           && $(MAKE) $(AM_MAKEFLAGS) dist \
1083           && rm -rf $(DIST_ARCHIVES) \
1084           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1085           && cd "$$am__cwd" \
1086           || exit 1
1087         $(am__remove_distdir)
1088         @(echo "$(distdir) archives ready for distribution: "; \
1089           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1090           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1091 distuninstallcheck:
1092         @test -n '$(distuninstallcheck_dir)' || { \
1093           echo 'ERROR: trying to run $@ with an empty' \
1094                '$$(distuninstallcheck_dir)' >&2; \
1095           exit 1; \
1096         }; \
1097         $(am__cd) '$(distuninstallcheck_dir)' || { \
1098           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
1099           exit 1; \
1100         }; \
1101         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1102            || { echo "ERROR: files left after uninstall:" ; \
1103                 if test -n "$(DESTDIR)"; then \
1104                   echo "  (check DESTDIR support)"; \
1105                 fi ; \
1106                 $(distuninstallcheck_listfiles) ; \
1107                 exit 1; } >&2
1108 distcleancheck: distclean
1109         @if test '$(srcdir)' = . ; then \
1110           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1111           exit 1 ; \
1112         fi
1113         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1114           || { echo "ERROR: files left in build directory after distclean:" ; \
1115                $(distcleancheck_listfiles) ; \
1116                exit 1; } >&2
1117 check-am: all-am
1118 check: $(BUILT_SOURCES)
1119         $(MAKE) $(AM_MAKEFLAGS) check-recursive
1120 all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS) \
1121                 config.h
1122 install-binPROGRAMS: install-libLTLIBRARIES
1123
1124 installdirs: installdirs-recursive
1125 installdirs-am:
1126         for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(includedir)"; do \
1127           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1128         done
1129 install: $(BUILT_SOURCES)
1130         $(MAKE) $(AM_MAKEFLAGS) install-recursive
1131 install-exec: install-exec-recursive
1132 install-data: install-data-recursive
1133 uninstall: uninstall-recursive
1134
1135 install-am: all-am
1136         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1137
1138 installcheck: installcheck-recursive
1139 install-strip:
1140         if test -z '$(STRIP)'; then \
1141           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1142             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1143               install; \
1144         else \
1145           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1146             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1147             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1148         fi
1149 mostlyclean-generic:
1150
1151 clean-generic:
1152
1153 distclean-generic:
1154         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1155         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1156
1157 maintainer-clean-generic:
1158         @echo "This command is intended for maintainers to use"
1159         @echo "it deletes files that may require special tools to rebuild."
1160         -rm -f parse.c
1161         -rm -f parse.h
1162         -rm -f scan.c
1163         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1164 clean: clean-recursive
1165
1166 clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
1167         clean-libtool mostlyclean-am
1168
1169 distclean: distclean-recursive
1170         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1171         -rm -rf ./$(DEPDIR)
1172         -rm -f Makefile
1173 distclean-am: clean-am distclean-compile distclean-generic \
1174         distclean-hdr distclean-libtool distclean-tags
1175
1176 dvi: dvi-recursive
1177
1178 dvi-am:
1179
1180 html: html-recursive
1181
1182 html-am:
1183
1184 info: info-recursive
1185
1186 info-am:
1187
1188 install-data-am: install-dist_docDATA install-includeHEADERS
1189
1190 install-dvi: install-dvi-recursive
1191
1192 install-dvi-am:
1193
1194 install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
1195         @$(NORMAL_INSTALL)
1196         $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1197 install-html: install-html-recursive
1198
1199 install-html-am:
1200
1201 install-info: install-info-recursive
1202
1203 install-info-am:
1204
1205 install-man:
1206
1207 install-pdf: install-pdf-recursive
1208
1209 install-pdf-am:
1210
1211 install-ps: install-ps-recursive
1212
1213 install-ps-am:
1214
1215 installcheck-am: installcheck-binPROGRAMS
1216
1217 maintainer-clean: maintainer-clean-recursive
1218         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1219         -rm -rf $(top_srcdir)/autom4te.cache
1220         -rm -rf ./$(DEPDIR)
1221         -rm -f Makefile
1222 maintainer-clean-am: distclean-am maintainer-clean-generic
1223
1224 mostlyclean: mostlyclean-recursive
1225
1226 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1227         mostlyclean-libtool
1228
1229 pdf: pdf-recursive
1230
1231 pdf-am:
1232
1233 ps: ps-recursive
1234
1235 ps-am:
1236
1237 uninstall-am: uninstall-binPROGRAMS uninstall-dist_docDATA \
1238         uninstall-includeHEADERS uninstall-libLTLIBRARIES
1239
1240 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
1241         ctags-recursive install install-am install-exec-am \
1242         install-strip tags-recursive
1243
1244 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1245         all all-am am--refresh check check-am clean clean-binPROGRAMS \
1246         clean-generic clean-libLTLIBRARIES clean-libtool ctags \
1247         ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzip \
1248         dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
1249         distclean distclean-compile distclean-generic distclean-hdr \
1250         distclean-libtool distclean-tags distcleancheck distdir \
1251         distuninstallcheck dvi dvi-am html html-am info info-am \
1252         install install-am install-binPROGRAMS install-data \
1253         install-data-am install-dist_docDATA install-dvi \
1254         install-dvi-am install-exec install-exec-am install-exec-hook \
1255         install-html install-html-am install-includeHEADERS \
1256         install-info install-info-am install-libLTLIBRARIES \
1257         install-man install-pdf install-pdf-am install-ps \
1258         install-ps-am install-strip installcheck installcheck-am \
1259         installcheck-binPROGRAMS installdirs installdirs-am \
1260         maintainer-clean maintainer-clean-generic mostlyclean \
1261         mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1262         pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
1263         uninstall-binPROGRAMS uninstall-dist_docDATA \
1264         uninstall-includeHEADERS uninstall-libLTLIBRARIES
1265
1266
1267 skel.c: flex.skl mkskel.sh flexint.h tables_shared.h
1268         sed 's/m4_/m4postproc_/g; s/m4preproc_/m4_/g' $(srcdir)/flex.skl | $(m4) -P -DFLEX_MAJOR_VERSION=`echo $(VERSION)|cut -f 1 -d .` -DFLEX_MINOR_VERSION=`echo $(VERSION)|cut -f 2 -d .` -DFLEX_SUBMINOR_VERSION=`echo $(VERSION)|cut -f 3 -d .` | sed 's/m4postproc_/m4_/g' | $(SHELL) $(srcdir)/mkskel.sh  >skel.c
1269
1270 # Explicitly describe dependencies.
1271 # You can recreate this with `gcc -I. -MM *.c'
1272 buf.o: buf.c flexdef.h flexint.h
1273 ccl.o: ccl.c flexdef.h flexint.h
1274 dfa.o: dfa.c flexdef.h flexint.h tables.h tables_shared.h
1275 ecs.o: ecs.c flexdef.h flexint.h
1276 scanflags.o: scanflags.c flexdef.h flexint.h
1277 gen.o: gen.c flexdef.h flexint.h tables.h tables_shared.h
1278 libmain.o: libmain.c
1279 libyywrap.o: libyywrap.c
1280 main.o: main.c flexdef.h flexint.h version.h options.h scanopt.h \
1281  tables.h tables_shared.h
1282 misc.o: misc.c flexdef.h flexint.h tables.h tables_shared.h
1283 nfa.o: nfa.c flexdef.h flexint.h
1284 options.o: options.c options.h scanopt.h flexdef.h flexint.h
1285 parse.o: parse.c flexdef.h flexint.h tables.h tables_shared.h
1286 scan.o: scan.c flexdef.h flexint.h parse.h
1287 scanopt.o: scanopt.c flexdef.h flexint.h scanopt.h
1288 skel.o: skel.c flexdef.h flexint.h
1289 sym.o: sym.c flexdef.h flexint.h
1290 tables.o: tables.c flexdef.h flexint.h tables.h tables_shared.h
1291 tables_shared.o: tables_shared.c flexdef.h flexint.h tables.h \
1292  tables_shared.h
1293 tblcmp.o: tblcmp.c flexdef.h flexint.h
1294 yylex.o: yylex.c flexdef.h flexint.h parse.h
1295 filter.o: filter.c flexdef.h flexint.h
1296
1297 # Create the ChangeLog, but only if we're inside a git working directory
1298
1299 ChangeLog: $(srcdir)/tools/git2cl
1300         if [ -d $(srcdir)/.git ] ; then \
1301                 $(srcdir)/tools/git2cl > $@ \
1302         ; fi
1303
1304 indent:
1305         if [ -f .indent.pro ] ; then \
1306         for f in $(indentfiles);\
1307         do\
1308                 echo indenting $$f ;\
1309                 $(indent) < $$f >/dev/null && indent $$f || echo $$f FAILED to indent ;\
1310         done \
1311         fi
1312
1313 install-exec-hook:
1314         cd $(DESTDIR)$(bindir) && \
1315                 $(LN_S) -f flex$(EXEEXT) flex++$(EXEEXT)
1316
1317 .PHONY: ChangeLog tags indent
1318
1319 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1320 # Otherwise a system limit (for SysV at least) may be exceeded.
1321 .NOEXPORT: