drivers/dpeth/dp.h

   1 /*
   2 **  File:       eth.h   Version 1.00,   Jan. 14, 1997
   3 **
   4 **  Author:     Giovanni Falzoni <gfalzoni@inwind.it>
   5 **
   6 **  Interface description for ethernet device driver
   7 **
   8 **  $Log$
   9 **  Revision 1.5  2006/07/10 12:43:38  philip
  10 **  Safecopy support in ethernet drivers.
  11 **
  12 **  Revision 1.4  2005/09/04 18:52:16  beng
  13 **  Giovanni's fixes to dpeth:
  14 **  Date: Sat, 03 Sep 2005 11:05:22 +0200
  15 **  Subject: Minix 3.0.8
  16 **
  17 **  Revision 1.3  2005/08/03 11:53:34  jnherder
  18 **  Miscellaneous cleanups.
  19 **
  20 **  Revision 1.2  2005/08/02 15:30:35  jnherder
  21 **  Various updates to support dynamically starting drivers.
  22 **  Output during initialization should be suppressed. Unless an error occurs.
  23 **  Note that main() can now be main(int argc, char **argv) and arguments can
  24 **  be passed when bringing up the driver.
  25 **
  26 **  Revision 1.1  2005/06/29 10:16:46  beng
  27 **  Import of dpeth 3c501/3c509b/.. ethernet driver by
  28 **  Giovanni Falzoni <fgalzoni@inwind.it>.
  29 **
  30 **  Revision 2.0  2005/06/26 16:16:46  lsodgf0
  31 **  Initial revision for Minix 3.0.6
  32 */
  33
  34 #include <sys/null.h>
  35
  36 #undef  ENABLE_3C501
  37 #undef  ENABLE_3C503
  38 #undef  ENABLE_3C509
  39 #undef  ENABLE_NE2000
  40 #undef  ENABLE_WDETH
  41 #undef  ENABLE_DP8390
  42
  43 #define ENABLE_3C501    1       /* enable 3Com Etherlink I board         */
  44 #define ENABLE_3C503    1       /* enable 3Com Etherlink II board        */
  45 #define ENABLE_3C509    1       /* enable 3Com Etherlink III board       */
  46 #define ENABLE_NE2000   1       /* enable Novell N2000 board             */
  47 #define ENABLE_WDETH    1       /* enable Western Digital WD80x3         */
  48
  49 #define ENABLE_DP8390   (ENABLE_3C503|ENABLE_WDETH|ENABLE_NE2000)
  50 #define HAVE_BUFFERS    (ENABLE_3C501|ENABLE_3C509)
  51
  52 #define NOT(x) (~(x))
  53
  54 #if debug == 1
  55 #       define DEBUG(statm) statm
  56 #else
  57 #       define DEBUG(statm)
  58 #endif
  59
  60 typedef struct _m_hdr_t {       /* Buffer handling header */
  61   struct _m_hdr_t *next;
  62   int size;
  63 } m_hdr_t;
  64
  65 typedef struct _buff_t {        /* Receive/Transmit buffer header */
  66   struct _buff_t *next;
  67   int size;
  68   int client;
  69   char buffer[2];
  70 } buff_t;
  71
  72 struct dpeth;
  73 struct iovec_dat;
  74 typedef void (*dp_eth_t) (struct dpeth *);
  75 typedef void (*dp_send_recv_t) (struct dpeth *, int, int);
  76
  77 #if ENABLE_DP8390 == 1
  78 typedef void (*dp_user2nicf_t) (struct dpeth *, int, int);
  79 typedef void (*dp_nic2userf_t) (struct dpeth *, int, int);
  80 typedef void (*dp_getblock_t) (struct dpeth *, u16_t, int, void *);
  81 #endif
  82
  83 #define SENDQ_NR        2       /* Size of the send queue        */
  84 #define IOVEC_NR        16      /* Number of IOVEC entries at a time */
  85
  86 typedef struct iovec_dat_s {
  87   iovec_s_t iod_iovec[IOVEC_NR];
  88   int iod_iovec_s;
  89   endpoint_t iod_proc_nr;
  90   cp_grant_id_t iod_grant;
  91   vir_bytes iod_iovec_offset;
  92 } iovec_dat_s_t;
  93
  94 typedef struct dpeth {
  95   /* The de_base_port field is the starting point of the probe. The
  96    * conf routine also fills de_linmem and de_irq. If the probe routine
  97    * knows the irq and/or memory address because they are hardwired in
  98    * the board, the probe should modify these fields. Futhermore, the
  99    * probe routine should also fill in de_initf and de_stopf fields
 100    * with the appropriate function pointers and set de_prog_IO iff
 101    * programmed I/O is to be used.
 102    *
 103    * The initf function fills the following fields. Only cards that do
 104    * programmed I/O fill in the de_data_port field. In addition, the
 105    * init routine has to fill in the sendq data structures. */
 106
 107   /* Board hardware interface */
 108   port_t de_base_port;
 109   port_t de_data_port;          /* For boards using Prog. I/O for xmit/recv */
 110
 111   int de_irq;
 112   int de_int_pending;
 113   int de_hook;                  /* interrupt hook at kernel */
 114
 115   char de_name[8];
 116
 117 #define DEI_DEFAULT     0x8000
 118
 119   phys_bytes de_linmem;         /* For boards using shared memory */
 120   vir_bytes de_memoffs;
 121   int de_ramsize;               /* Size of on board memory       */
 122   int de_offset_page;           /* Offset of shared memory page  */
 123
 124   /* Board specific functions */
 125   dp_eth_t de_initf;
 126   dp_eth_t de_stopf;
 127   dp_eth_t de_resetf;
 128   dp_eth_t de_flagsf;
 129   dp_eth_t de_getstatsf;
 130   dp_eth_t de_dumpstatsf;
 131   dp_eth_t de_interruptf;
 132   dp_send_recv_t de_recvf;
 133   dp_send_recv_t de_sendf;
 134
 135   ether_addr_t de_address;      /* Ethernet Address */
 136   eth_stat_t de_stat;           /* Ethernet Statistics */
 137   unsigned long bytes_Tx;       /* Total bytes sent/received */
 138   unsigned long bytes_Rx;
 139
 140 #define SA_ADDR_LEN     sizeof(ether_addr_t)
 141
 142   int de_flags;                 /* Send/Receive mode (Configuration) */
 143
 144 #define DEF_EMPTY       0x0000
 145 #define DEF_READING     0x0001
 146 #define DEF_RECV_BUSY   0x0002
 147 #define DEF_ACK_RECV    0x0004
 148 #define DEF_SENDING     0x0010
 149 #define DEF_XMIT_BUSY   0x0020
 150 #define DEF_ACK_SEND    0x0040
 151 #define DEF_PROMISC     0x0100
 152 #define DEF_MULTI       0x0200
 153 #define DEF_BROAD       0x0400
 154 #define DEF_ENABLED     0x2000
 155 #define DEF_STOPPED     0x4000
 156
 157   int de_mode;                  /* Status of the Interface */
 158
 159 #define DEM_DISABLED    0x0000
 160 #define DEM_SINK        0x0001
 161 #define DEM_ENABLED     0x0002
 162
 163   /* Temporary storage for RECV/SEND requests */
 164   iovec_dat_s_t de_read_iovec;
 165   iovec_dat_s_t de_write_iovec;
 166   vir_bytes de_read_s;
 167   vir_bytes de_send_s;
 168   int de_client;
 169 /*
 170   message de_sendmsg;
 171   iovec_dat_t de_tmp_iovec;
 172 */
 173 #if ENABLE_DP8390 == 1
 174   /* For use by NS DP8390 driver */
 175   port_t de_dp8390_port;
 176   int de_prog_IO;
 177   int de_16bit;
 178   int de_startpage;
 179   int de_stoppage;
 180
 181   /* Do it yourself send queue */
 182   struct sendq {
 183         int sq_filled;          /* This buffer contains a packet */
 184         int sq_size;            /* with this size */
 185         int sq_sendpage;        /* starting page of the buffer */
 186   } de_sendq[SENDQ_NR];
 187   int de_sendq_nr;
 188   int de_sendq_head;            /* Enqueue at the head */
 189   int de_sendq_tail;            /* Dequeue at the tail */
 190
 191   dp_user2nicf_t de_user2nicf;
 192   dp_nic2userf_t de_nic2userf;
 193   dp_getblock_t de_getblockf;
 194 #endif
 195
 196 #if ENABLE_3C509 == 1
 197   /* For use by 3Com Etherlink III (3c509) driver */
 198   port_t de_id_port;
 199   port_t de_if_port;
 200 #endif
 201
 202 #if ENABLE_3C501 == 1 ||  ENABLE_3C509 == 1
 203   /* For use by 3Com Etherlink (3c501 and 3c509) driver */
 204   buff_t *de_recvq_head;
 205   buff_t *de_recvq_tail;
 206   buff_t *de_xmitq_head;
 207   buff_t *de_xmitq_tail;
 208   u16_t de_recv_mode;
 209   clock_t de_xmit_start;
 210 #endif
 211
 212 } dpeth_t;
 213
 214 /*
 215  *      Function definitions
 216  */
 217
 218 /* dp.c */
 219 void dp_next_iovec(iovec_dat_s_t * iovp);
 220
 221 /* devio.c */
 222 #if defined USE_IOPL
 223 #include <machine/portio.h>
 224 #else
 225 unsigned int inb(unsigned short int);
 226 unsigned int inw(unsigned short int);
 227 void insb(unsigned short int, endpoint_t, void *, int);
 228 void insw(unsigned short int, int, void *, int);
 229 void outb(unsigned short int, unsigned long);
 230 void outw(unsigned short int, unsigned long);
 231 void outsb(unsigned short int, endpoint_t, void *, int);
 232 void outsw(unsigned short int, int, void *, int);
 233 #endif
 234
 235 /* netbuff.c */
 236 void *alloc_buff(dpeth_t *, int);
 237 void free_buff(dpeth_t *, void *);
 238 void init_buff(dpeth_t *, buff_t **);
 239 void mem2user(dpeth_t *, buff_t *);
 240 void user2mem(dpeth_t *, buff_t *);
 241
 242 /* 3c501.c */
 243 #if ENABLE_3C501 == 1
 244 int el1_probe(dpeth_t *);
 245 #else
 246 #define el1_probe(x) (0)
 247 #endif
 248
 249 /* 3c503.c */
 250 #if ENABLE_3C503 == 1
 251 int el2_probe(dpeth_t *);
 252 #else
 253 #define el2_probe(x) (0)
 254 #endif
 255
 256 /* 3c509.c */
 257 #if ENABLE_3C509 == 1
 258 int el3_probe(dpeth_t *);
 259 #else
 260 #define el3_probe(x) (0)
 261 #endif
 262
 263 /* ne.c */
 264 #if ENABLE_NE2000 == 1
 265 int ne_probe(dpeth_t * dep);
 266 #else
 267 #define ne_probe(x) (0)
 268 #endif
 269
 270 /* wd.c */
 271 #if ENABLE_WDETH == 1
 272 int wdeth_probe(dpeth_t * dep);
 273 #else
 274 #define wdeth_probe(x) (0)
 275 #endif
 276
 277 #define lock()   (++dep->de_int_pending,sys_irqdisable(&dep->de_hook))
 278 #define unlock() do{int i=(--dep->de_int_pending)?0:sys_irqenable(&dep->de_hook);(void) i;}while(0)
 279 #define milli_delay(t) tickdelay(1)
 280
 281 /** dp.h **/