| blob | c7b8d7e5c145ded9cd8f72e6c70a18aa9e84646e |
1 .\"
2 .\" Copyright 1994 Vrije Universiteit, The Netherlands.
3 .\" For full copyright and restrictions on use see the file COPYRIGHT in the
4 .\" top level of the Amoeba distribution.
5 .\"
6 .ig
7 Software: Philip Homburg, 1991
8 Document: Philip Homburg, Sept 3, 1991
9 Modified: Greg Sharp and Philip Homburg, March 1992
10 - merged with udp(L) and made a little more complete.
11 Greg Sharp, April 1992
12 - updated keywords for auto index generation
13 Modified: Kees J. Bot, June 1994
14 - changed to man(7) format for MINIX 3.
15 ..
16 .TH IP 4
17 .SH NAME
18 ip, eth, psip, udp, tcp \- Internet Protocol server devices and definitions
19 .SH DESCRIPTION
20 .de SP
21 .if t .sp 0.4
22 .if n .sp
23 ..
24 The
25 .BR ip* ,
26 .BR eth* ,
27 .BR psip* ,
28 .BR tcp* ,
29 and
30 .B udp*
31 devices give access to the Internet Protocol (IP) services in MINIX 3.
32 There can be up to 16 different networks, with 4 network devices each
33 (a network has either an
34 .B eth*
35 or a
36 .B psip*
37 device, not both.)
38 The
39 .B *
40 in the device names is a decimal number, so one may see names from
41 .B ip0
42 to
43 .BR ip15 .
44 A program scanning all networks must try all 16, and not stop if one in
45 between is missing. One network is the default network. Its devices are
46 linked to names without numbers.
47 .PP
48 The
49 .B eth*
50 and
51 .B psip*
52 devices give direct access to the network packets at the lowest level.
53 The
54 .BR ip* ,
55 .BR tcp* ,
56 and
57 .B udp*
58 devices give access to IP, TCP, or UDP services.
59 .PP
60 Most programs that use TCP/IP use code like the following to access the
61 proper devices:
62 .PP
63 .RS
64 .nf
65 if ((tcp_device= getenv("TCP_DEVICE")) == NULL)
66 tcp_device= "/dev/tcp";
67 .fi
68 .RE
69 .PP
70 The low level networking programs such as
71 .BR ifconfig (8)
72 also have options to select the device they are working with. The
73 convention is:
74 .PP
75 .RS
76 .BI ETH_DEVICE= device
77 .br
78 .BI -E " device"
79 .RS
80 Device to use as raw ethernet device instead of the default /dev/eth.
81 .RE
82 .SP
83 .BI PSIP_DEVICE= device
84 .br
85 .BI -P " device"
86 .RS
87 Pseudo IP device to use instead of
88 .BR /dev/psip .
89 .RE
90 .SP
91 .BI IP_DEVICE= device
92 .br
93 .BI -I " device"
94 .RS
95 IP device to use instead of
96 .BR /dev/ip .
97 .RE
98 .SP
99 .BI TCP_DEVICE= device
100 .br
101 .BI -T " device"
102 .RS
103 TCP device to use instead of
104 .BR /dev/tcp .
105 .RE
106 .SP
107 .BI UDP_DEVICE= device
108 .br
109 .BI -U " device"
110 .RS
111 UDP device to use instead of
112 .BR /dev/udp .
113 .RE
114 .RE
115 .SS Programming
116 Access to the IP services is provided using filedescriptors to open IP
117 devices. These open IP channels can be configured with
118 .BR ioctl (2)
119 calls, and data can be transferred by calls to
120 .BR read (2),
121 and
122 .BR write (2).
123 .SS "Types (general)"
124 .IP <sys/types.h>
125 .br
126 Defines
127 .BR u8_t ,
128 .BR u16_t ,
129 .B u32_t
130 and
131 .B i32_t
132 (and
133 .BR U8_t ,
134 .BR U16_t ,
135 .B U32_t
136 and
137 .B I32_t
138 for use in prototypes).
139 .SS "Types (eth)"
140 .IP <net/gen/ether.h>
141 .br
142 Defines struct ether_addr (\fBether_addr_t\fP) and
143 .B ether_type_t
144 and
145 .B Ether_type_t
146 for use in prototypes.
147 .IP <net/gen/eth_io.h>
148 .br
149 Defines struct nwio_ethopt (\fBnwio_ethopt_t\fP) and
150 struct nwio_ethstat (\fBnwio_ethstat_t\fP)
151 .IP <net/gen/eth_hdr.h>
152 .br
153 Defines struct eth_hdr (\fBeth_hdr_t\fP)
154 .SS "Types (psip)"
155 .IP <net/gen/psip_hdr.h>
156 .br
157 [[[No description available yet.]]]
158 .IP <net/gen/psip_io.h>
159 .br
160 [[[No description available yet.]]]
161 .SS "Types (ip)"
162 .IP <net/gen/in.h>
163 .br
164 Defines
165 .BR ipaddr_t ,
166 .BR ipproto_t
167 and struct ip_hdropt (\fBip_hdropt_t\fP).
168 .IP <net/gen/ip_io.h>
169 .br
170 Defines struct nwio_ipconf (\fBnwio_ipconf_t\fP) and
171 struct nwio_ipopt (\fBnwio_ipopt_t\fP)
172 .IP <net/gen/ip_hdr.h>
173 .br
174 Defines struct ip_hdr (\fBip_hdr_t\fP)
175 .IP <net/gen/route.h>
176 .br
177 Defines struct nwio_route (\fBnwio_route_t\fP)
178 .SS "Types (tcp)"
179 .IP <net/gen/tcp.h>
180 .br
181 Defines
182 .B tcpport_t
183 and
184 .B Tcpport_t
185 for use in prototypes.
186 .IP <net/gen/tcp_io.h>
187 .br
188 Defines struct nwio_tcpconf (\fBnwio_tcpconf_t\fP),
189 struct nwio_tcpcl (\fBnwio_tcpcl_t\fP),
190 struct nwio_tcpatt (\fBnwio_tcpatt_t\fP) and
191 struct nwio_tcpopt (\fBnwio_tcpopt_t\fP).
192 .IP <net/gen/tcp_hdr.h>
193 .br
194 Defines struct tcp_hdr (\fBtcp_hdr_t\fP) and struct tcp_hdropt
195 (\fBtcp_hdropt_t\fP).
196 .SS "Types (udp)"
197 .IP <net/gen/udp.h>
198 .br
199 Defines
200 .B udpport_t
201 and
202 .B Udpport_t
203 for use in prototypes.
204 .IP <net/gen/udp_io.h>
205 .br
206 Defines struct nwio_udpopt (\fBnwio_udpopt_t\fP).
207 .IP <net/gen/udp_hdr.h>
208 .br
209 Defines struct udp_hdr (\fBudp_hdr_t\fP) and struct udp_io_hdr
210 (\fBudp_io_hdr_t\fP).
211 .SS "Byte Order Conversion"
212 All 16-bit and 32-bit quantities in IP headers must be in network byte
213 order. The macros described in
214 .BR hton (3)
215 can be used to convert these values to and from the byte order used by
216 the host machine.
217 .SS "The Internet Checksum"
218 The
219 .B oneC_sum
220 function (see
221 .BR oneC_sum (3))
222 is used to calculate the one's complement checksum needed for IP network
223 packets.
224 .SS "General Functions"
225 .PP
226 .ft B
227 \fIfd\fP = open(\fItcpip_device\fP, O_RDWR)
228 .ft R
229 .PP
230 This is how one normally obtains a filedescriptor for a new TCP/IP channel.
231 .I tcpip_device
232 names one of the TCP/IP devices. The channel may be used both to send or to
233 receive data.
234 .PP
235 .ft B
236 \fIn\fP = read(\fIfd\fP, \fIbuf\fP, \fIsize\fP)
237 .ft R
238 .PP
239 Receives one packet (low level devices) or a number of bytes (TCP stream).
240 Returns the the number of bytes placed into
241 .IR buf ,
242 or returns -1 with an error code placed into
243 .BR errno .
244 .PP
245 .ft B
246 \fIn\fP = write(\fIfd\fP, \fIbuf\fP, \fIsize\fP)
247 .ft R
248 .PP
249 Sends one packet (low level devices) or a number of bytes (TCP stream).
250 Returns
251 .I size
252 or -1 with the error code placed into
253 .BR errno .
254 The TCP/IP
255 .B read
256 and
257 .B write
258 functions behave like reads and writes on pipes when it comes to signals.
259 .SS "ETH Functions"
260 .PP
261 .ft B
262 ioctl(\fIfd\fP, NWIOGETHSTAT, &struct nwio_ethstat)
263 .ft R
264 .PP
265 The
266 .B NWIOGETHSTAT
267 ioctl
268 returns the Ethernet address and some statistics of the Ethernet server of
269 the channel
270 .IR fd .
271 The result is returned in the nwio_ethstat structure.
272 The \fBstruct nwio_ethstat\fP is defined in <net/gen/eth_io.h>:
273 .PP
274 .RS
275 .nf
276 .if t .ft C
277 typedef struct nwio_ethstat
278 {
279 ether_addr_t nwes_addr;
280 eth_stat_t nwes_stat;
281 } nwio_ethstat_t;
282 .SP
283 typedef struct eth_stat
284 {
285 unsigned long ets_recvErr, /* # receive errors */
286 ets_sendErr, /* # send error */
287 ets_OVW, /* # buffer overwrite warnings,
288 (packets arrive faster than
289 can be processed) */
290 ets_CRCerr, /* # crc errors of read */
291 ets_frameAll, /* # frames not aligned (# bits
292 not a multiple of 8) */
293 ets_missedP, /* # packets missed due to too
294 slow packet processing */
295 ets_packetR, /* # packets received */
296 ets_packetT, /* # packets transmitted */
297 ets_transDef, /* # transmission deferred (there
298 was a transmission of an
299 other station in progress */
300 ets_collision, /* # collisions */
301 ets_transAb, /* # transmissions aborted due
302 to excessive collisions */
303 ets_carrSense, /* # carrier sense lost */
304 ets_fifoUnder, /* # fifo underruns (processor
305 is too busy) */
306 ets_fifoOver, /* # fifo overruns (processor is
307 too busy) */
308 ets_CDheartbeat, /* # times unable to transmit
309 collision signal */
310 ets_OWC; /* # times out of window
311 collision */
312 } eth_stat_t;
313 .if t .ft R
314 .fi
315 .RE
316 .PP
317 .ft B
318 ioctl(\fIfd\fP, NWIOSETHOPT, &struct nwio_ethopt)
319 .ft R
320 .PP
321 Before an Ethernet channel can be used to send or receive
322 Ethernet packets, it has to be configured using the
323 .B NWIOSETHOPT
324 ioctl.
325 The structure
326 .B nwio_ethopt
327 is defined in <net/gen/eth_io.h>:
328 .PP
329 .RS
330 .nf
331 .if t .ft C
332 typedef struct nwio_ethopt
333 {
334 u32_t nweo_flags;
335 ether_addr_t nweo_multi, nweo_rem;
336 ether_type_t nweo_type;
337 } nwio_ethopt_t;
338 .SP
339 #define NWEO_NOFLAGS 0x0000L
340 #define NWEO_ACC_MASK 0x0003L
341 # define NWEO_EXCL 0x00000001L
342 # define NWEO_SHARED 0x00000002L
343 # define NWEO_COPY 0x00000003L
344 #define NWEO_LOC_MASK 0x0010L
345 # define NWEO_EN_LOC 0x00000010L
346 # define NWEO_DI_LOC 0x00100000L
347 #define NWEO_BROAD_MASK 0x0020L
348 # define NWEO_EN_BROAD 0x00000020L
349 # define NWEO_DI_BROAD 0x00200000L
350 #define NWEO_MULTI_MASK 0x0040L
351 # define NWEO_EN_MULTI 0x00000040L
352 # define NWEO_DI_MULTI 0x00400000L
353 #define NWEO_PROMISC_MASK 0x0080L
354 # define NWEO_EN_PROMISC 0x00000080L
355 # define NWEO_DI_PROMISC 0x00800000L
356 #define NWEO_REM_MASK 0x0100L
357 # define NWEO_REMSPEC 0x00000100L
358 # define NWEO_REMANY 0x01000000L
359 #define NWEO_TYPE_MASK 0x0200L
360 # define NWEO_TYPESPEC 0x00000200L
361 # define NWEO_TYPEANY 0x02000000L
362 #define NWEO_RW_MASK 0x1000L
363 # define NWEO_RWDATONLY 0x00001000L
364 # define NWEO_RWDATALL 0x10000000L
365 .if t .ft R
366 .fi
367 .RE
368 .PP
369 The configuration is divided in a number of section (covered by the xx_MASK
370 macros).
371 Options can be set in the
372 .B nweo_flags
373 field.
374 The first section (\fBNWEO_ACC_MASK\fP) controls the access to a certain
375 Ethernet packet type.
376 If
377 .B NWEO_EXCL
378 is selected then this is the only channel that can send or
379 receive Ethernet packets of the selected type.
380 If
381 .B NWEO_SHARED
382 is selected then multiple channels (which all have to
383 select
384 .BR NWEO_SHARED )
385 can use the same Ethernet type, they all can send
386 packets but incoming packets will be delivered to at most one of them.
387 If
388 .B NWEO_COPY
389 is selected then multiple channels have access to the same
390 Ethernet type and all receive a copy of an incoming packet.
391 .LP
392 The
393 .B NWEO_LOC_MASK
394 flags control the delivery of packets with a destination
395 address equal to the Ethernet address of the machine.
396 If
397 .B NWEO_EN_LOC
398 is selected then these packets will be delivered and with
399 .B NWEO_DI_LOC
400 they will be discarded.
401 .PP
402 .BR NWEO_BROAD_MASK ,
403 .BR NWEO_MULTI_MASK ,
404 and
405 .B NWEO_PROMISC_MASK
406 do the same to broadcast packets,
407 multicast packets and promiscuous mode packets as
408 .B NWEO_LOC_MASK
409 does for local packets.
410 Except that the precise multicast address is taken from the \fBnweo_multi\fP
411 field.
412 .LP
413 The
414 .B NWEO_REM_MASK
415 flags control whether communication is restricted to
416 single destination or not.
417 .B NWEO_REMSPEC
418 restricts sending and receiving of packets to the single
419 remote computer specified in the \fBnweo_rem\fP field.
420 .B NWEO_REMANY
421 allows sending to and receiving from any remote computer.
422 .PP
423 .B NWEO_TYPESPEC
424 restricts sending and receiving of packets to the type
425 specified in \fBnweo_type\fP.
426 The type has to be in network byte order (using
427 .BR hton (3)).
428 .B NWEO_TYPEANY
429 allows any type.
430 .PP
431 If the Ethernet header is completely specified by the
432 .B nweo_flags
433 i.e., all of
434 .BR NWEO_EN_LOC ,
435 .BR NWEO_DI_BROAD ,
436 .BR NWEO_DI_MULTI ,
437 .BR NWEO_DI_PROMISC ,
438 .BR NWEO_REMSPEC
439 and
440 .B NWEO_TYPESPEC
441 are
442 specified, then
443 .B NWEO_RWDATONLY
444 can be used to send and receive only the data part of an Ethernet packet.
445 If
446 .B NWEO_RWDATALL
447 is specified then both Ethernet header and data are used.
448 .SS "PSIP Functions"
449 .PP
450 [[[No description available yet.]]]
451 .SS "IP Functions"
452 .PP
453 .ft B
454 ioctl(\fIfd\fP, NWIOGIPCONF, &struct nwio_ipconf)
455 .ft R
456 .PP
457 The
458 .B NWIOGIPCONF
459 ioctl reports the Internet Address and the netmask.
460 For the \fInwio_ipconf\fP structure see the \fBNWIOSIPCONF\fP ioctl below.
461 .PP
462 .ft B
463 ioctl(\fIfd\fP, NWIOGIPOROUTE, &struct nwio_route)
464 .ft R
465 .PP
466 The
467 .B NWIOGIPOROUTE
468 ioctl can be used to query an IP server about its routing table.
469 [[[NWIODIPOROUTE, NWIOGIPIROUTE, NWIODIPIROUTE?]]]
470 The structure \fBnwio_route\fP is defined in <net/gen/route.h>:
471 .PP
472 .RS
473 .nf
474 .if t .ft C
475 typedef struct nwio_route
476 {
477 u32_t nwr_ent_no;
478 u32_t nwr_ent_count;
479 ipaddr_t nwr_dest;
480 ipaddr_t nwr_netmask;
481 ipaddr_t nwr_gateway;
482 u32_t nwr_dist;
483 u32_t nwr_flags;
484 u32_t nwr_pref;
485 } nwio_route_t;
486 .SP
487 #define NWRF_EMPTY 0
488 #define NWRF_INUSE 1
489 #define NWRF_FIXED 2
490 .if t .ft R
491 .fi
492 .RE
493 .PP
494 The requested entry is taken from \fBnwr_ent_no\fP.
495 Entries are counted from 0, so the value 0 can be used for an initial query.
496 The size of the routing table is returned in \fBnwr_ent_count\fP.
497 The \fBnwr_flags\fP indicates if the entry is in use (\fBNWRF_INUSE\fP) and
498 if the entry was inserted manually (using \fBNWIOSIPOROUTE\fP) or generated
499 by the IP server itself.
500 The route is described by
501 .BR nwr_dest ,
502 .BR nwr_netmask ,
503 .BR nwr_gateway ,
504 .BR nwr_dist ,
505 and
506 .BR nwr_pref .
507 \fBNwr_dest\fP and \fBnwr_netmask\fP select the destination addresses.
508 A value of 0.0.0.0 (0x0) in both \fBnwr_dest\fP and \fBnwr_netmask\fP means
509 every host.
510 A value of 255.255.255.255 (0xffffffff) in \fBnwr_netmask\fP means a single
511 host.
512 Other values of \fBnwr_netmask\fP are netmasks for the network specified
513 by \fBnwr_dest\fP.
514 \fBNwr_gateway\fP is gateway that should be used.
515 \fBNwr_dist\fP is a minimal distance.
516 Packets with a time to live smaller than \fBnwr_dist\fP will not reach the
517 destination.
518 If two routes have equal netmask and distance fields but different
519 gateways then the gateway with highest value in \fBnwr_pref\fP is used.
520 .PP
521 .ft B
522 ioctl(\fIfd\fP, NWIOSIPCONF, &struct nwio_ipconf)
523 .ft R
524 .PP
525 The
526 .B NWIOSIPCONF
527 ioctl can be used to inform the IP server about its Internet Address
528 and/or its netmask.
529 Normally an IP server will discover its Internet Address using the RARP
530 protocol.
531 .B NWIOSIPCONF
532 can be used in the case that the RARP failed, or the netmask has to be changed.
533 Note that higher level protocols (TCP and UDP) assume that the Internet Address
534 of an IP device does not change, therefore TCP and UDP stop functioning if
535 the Internet Address is changed.
536 .PP
537 The structure \fBnwio_ipconf\fP is defined in <net/gen/ip_io.h>:
538 .PP
539 .RS
540 .nf
541 .if t .ft C
542 typedef struct nwio_ipconf
543 {
544 u32_t nwic_flags;
545 ipaddr_t nwic_ipaddr;
546 ipaddr_t nwic_netmask;
547 } nwio_ipconf_t;
548 .SP
549 #define NWIC_NOFLAGS 0x0
550 #define NWIC_FLAGS 0x3
551 # define NWIC_IPADDR_SET 0x1
552 # define NWIC_NETMASK_SET 0x2
553 .if t .ft R
554 .fi
555 .RE
556 .PP
557 The function of \fBnwio_ipconf\fP depends on the value of \fBnwic_flags\fP.
558 If
559 .B NWIC_IPADDR_SET
560 is set then the Internet Address will be set to
561 \fBnwic_ipaddr\fP.
562 If
563 .B NWIC_NETMASK_SET
564 is set then the Internet Address will be set to
565 \fBnwic_netmask\fP.
566 .PP
567 .ft B
568 ioctl(\fIfd\fP, NWIOSIPOPT, &struct nwio_ipopt)
569 .ft R
570 .PP
571 Before an IP channel can be used, it has to be configured using the
572 .B NWIOSIPOPT
573 ioctl.
574 The structure \fBnwio_ipopt\fP is defined in <net/gen/ip_io.h>:
575 .PP
576 .RS
577 .nf
578 .if t .ft C
579 typedef struct nwio_ipopt
580 {
581 u32_t nwio_flags;
582 ipaddr_t nwio_rem;
583 ip_hdropt_t nwio_hdropt;
584 u8_t nwio_tos;
585 u8_t nwio_ttl;
586 u8_t nwio_df;
587 ipproto_t nwio_proto;
588 } nwio_ipopt_t;
589 .SP
590 #define NWIO_NOFLAGS 0x0000L
591 #define NWIO_ACC_MASK 0x0003L
592 # define NWIO_EXCL 0x00000001L
593 # define NWIO_SHARED 0x00000002L
594 # define NWIO_COPY 0x00000003L
595 #define NWIO_LOC_MASK 0x0010L
596 # define NWIO_EN_LOC 0x00000010L
597 # define NWIO_DI_LOC 0x00100000L
598 #define NWIO_BROAD_MASK 0x0020L
599 # define NWIO_EN_BROAD 0x00000020L
600 # define NWIO_DI_BROAD 0x00200000L
601 #define NWIO_REM_MASK 0x0100L
602 # define NWIO_REMSPEC 0x00000100L
603 # define NWIO_REMANY 0x01000000L
604 #define NWIO_PROTO_MASK 0x0200L
605 # define NWIO_PROTOSPEC 0x00000200L
606 # define NWIO_PROTOANY 0x02000000L
607 #define NWIO_HDR_O_MASK 0x0400L
608 # define NWIO_HDR_O_SPEC 0x00000400L
609 # define NWIO_HDR_O_ANY 0x04000000L
610 #define NWIO_RW_MASK 0x1000L
611 # define NWIO_RWDATONLY 0x00001000L
612 # define NWIO_RWDATALL 0x10000000L
613 .if t .ft R
614 .fi
615 .RE
616 .PP
617 The options are divided in several categories:
618 .BR NWIO_ACC_MASK ,
619 .BR NWIO_LOC_MASK ,
620 .BR NWIO_BROAD_MASK ,
621 .BR NWIO_REM_MASK ,
622 .BR NWIO_PROTO_MASK ,
623 .B NWIO_HDR_O_MASK
624 and
625 .BR NWIO_RW_MASK .
626 A channel is configured when one option of each category is set.
627 .PP
628 The options covered by
629 .B NWIO_ACC_MASK
630 control the number of channels that
631 can use one IP protocol.
632 If
633 .B NWIO_EXCL
634 is specified then only that channel can use a certain IP protocol.
635 If
636 .B NWIO_SHARED
637 then multiple channels that all have to specify
638 .B NWIO_SHARED
639 can use the same IP protocol, but incoming packets will
640 be delivered to a most one channel.
641 .B NWIO_COPY
642 does not impose any restrictions.
643 Every channel gets a copy of an incoming packet.
644 .PP
645 .B NWIO_LOC_MASK
646 and
647 .B NWIO_BROAD_MASK
648 control the delivery of packets.
649 If
650 .B NWIO_EN_LOC
651 is specified then packets that are explicitly send to
652 the IP server are delivered.
653 If
654 .B NWIO_EN_BROAD
655 is specified then broadcast packets are delivered.
656 Either one or both of them can be disabled with
657 .B NWIO_DI_LOC
658 and
659 .BR NWIO_DI_BROAD .
660 .PP
661 .B NWIO_REMSPEC
662 can be used to restrict communication to one remote host.
663 This host is taken from the \fBnwio_rem\fP field.
664 If any remote host is to be allowed then
665 .B NWIO_REMANY
666 can be used.
667 .PP
668 .B NWIO_PROTOSPEC
669 restricts communication to one IP protocol, specified
670 in \fBnwio_proto\fP.
671 .B NWIO_PROTOANY
672 allows any protocol to be sent or received.
673 .PP
674 .B NWIO_HDR_O_SPEC
675 specifies all IP header options in advance.
676 The values are taken from
677 .BR nwio_hdropt ,
678 .BR nwio_tos ,
679 .BR nwio_ttl ,
680 and
681 .BR nwio_df .
682 \fBNwio_hdropt\fP specifies the IP options that should be present in an
683 outgoing packet.
684 \fBIp_hdropt_t\fP is defined in <net/gen/in.h>:
685 .PP
686 .RS
687 .nf
688 .if t .ft C
689 typedef struct ip_hdropt
690 {
691 u8_t iho_opt_siz;
692 u8_t iho_data[IP_MAX_HDR_SIZE-IP_MIN_HDR_SIZE];
693 } ip_hdropt_t;
694 .if t .ft R
695 .fi
696 .RE
697 .PP
698 The bytes of size \fBiho_opt_siz\fP in \fBiho_data\fP are appended to the IP
699 header.
700 \fBNwio_tos\fP specifies the value of the ``type of service'' bits,
701 \fBnwio_ttl\fP gives the value of the ``time to live'' field and \fBnwio_df\fP
702 specifies whether fragmentation is disallowed or not.
703 .B NWIO_HDR_O_ANY
704 specifies that the header options should be specified at
705 each write request.
706 .PP
707 .B NWIO_RWDATONLY
708 specifies that the header should be omitted from a
709 write request.
710 This option can only be used when all header fields are specified in previous
711 options:
712 .BR NWIO_EN_LOC ,
713 .BR NWIO_DI_BROAD ,
714 .BR NWIO_REMSPEC ,
715 .B NWIO_PROTOSPEC
716 and
717 .BR NWIO_HDR_O_SPEC .
718 A read operation will also only return the data part, so the IP options will
719 be lost.
720 .PP
721 .ft B
722 ioctl(\fIfd\fP, NWIOSIPOROUTE, &struct nwio_route)
723 .ft R
724 .PP
725 The
726 .B NWIOSIPOROUTE
727 ioctl adds a route to the routing table.
728 See \fBNWIOGIPOROUTE\fP above for a description of the \fBnwio_route\fP
729 structure.
730 The fields \fBnwr_ent_no\fP and \fBnwr_ent_count\fP are ignored.
731 .SS "TCP Functions"
732 .PP
733 .ft B
734 ioctl(\fIfd\fP, NWIOTCPCONN, &struct nwio_tcpcl)
735 .ft R
736 .PP
737 The
738 .B NWIOTCPCONN
739 ioctl tries to setup a connection with a remote TCP/IP server.
740 The channel must be fully configured (see
741 .BR NWIOSTCPCONF )
742 and values for the local port, the remote port and the remote address have be
743 specified using
744 .B NWTC_LP_SET
745 or
746 .BR NWTC_LP_SEL ,
747 .B NWTC_SET_RA
748 and
749 .BR NWTC_SET_RP .
750 The struct nwio_tcpcl is defined in <net/gen/tcp_io.h> as:
751 .PP
752 .RS
753 .nf
754 .if t .ft C
755 typedef struct nwio_tcpcl
756 {
757 long nwtcl_flags;
758 long nwtcl_ttl;
759 } nwio_tcpcl_t;
760 .if t .ft R
761 .fi
762 .RE
763 .PP
764 Set the
765 .B nwtcl_flags
766 field to zero before the connect or listen call. [[[Further explanation of
767 nwio_tcpcl?]]]
768 .PP
769 .ft B
770 ioctl(\fIfd\fP, NWIOGTCPCONF, &struct nwio_tcpconf)
771 .ft R
772 .PP
773 This call reports the current configuration of a TCP channel.
774 The
775 .B nwtc_flags
776 field shows the status of the
777 .BR access ,
778 .BR locport ,
779 .B remaddr
780 and
781 .B remport
782 fields.
783 .B Nwtc_locaddr
784 contains the Internet address of the TCP/IP server.
785 .B Remaddr
786 contains the Internet address of the remote TCP/IP server when set with
787 .B NWTC_SET_RA
788 or after a successful connect or listen (see
789 .B NWIOTCPCONN
790 or
791 .BR NWIOTCPLISTEN ).
792 .B Nwio_locport
793 contains the local TCP/IP port set with
794 .B NWTC_LP_SET
795 or the selected port set with
796 .BR NWTC_LP_SEL .
797 .B Nwtc_remport
798 contains the TCP port of the remote TCP/IP server as set with
799 .B NWIO_SET_RP
800 or after a successful connect or listen.
801 .PP
802 A value of 0 (zero) is reported for
803 .BR nwtc_remaddr ,
804 .B nwtc_locport
805 or
806 .B nwtc_remport
807 when no value is set either explicitly or implicitly.
808 .PP
809 .ft B
810 ioctl(\fIfd\fP, NWIOTCPLISTEN, &struct nwio_tcpcl)
811 .ft R
812 .PP
813 The
814 .B NWIOTCPLISTEN
815 ioctl waits until a remote TCP/IP server tries to connect to this channel.
816 The channel has to be configured (see
817 .BR NWIOSTCPCONF ).
818 An additional restriction is that the local port
819 must be set (with
820 .BR NWTC_LP_SET )
821 or selected (with
822 .BR NWTC_LP_SEL ).
823 When a remote address is set only connections for that host are accepted, and
824 when a remote port is set only connections from that port are accepted.
825 After a successful listen
826 .B NWIOGTCPCONF
827 can be used to find out what the address and port of the other side are.
828 .PP
829 .ft B
830 ioctl(\fIfd\fP, NWIOSTCPCONF, &struct nwio_tcpconf)
831 .ft R
832 .PP
833 Before a TCP channel can be used it must configured using the
834 .B NWIOSTCPCONF
835 ioctl.
836 The parameters to
837 .B NWIOSTCPCONF
838 are the channel file descriptor and a
839 .B struct nwio_tcpconf
840 as defined in <net/gen/tcp_io.h>:
841 .PP
842 .RS
843 .nf
844 .if t .ft C
845 typedef struct nwio_tcpconf
846 {
847 u32_t nwtc_flags;
848 ipaddr_t nwtc_locaddr;
849 ipaddr_t nwtc_remaddr;
850 tcpport_t nwtc_locport;
851 tcpport_t nwtc_remport;
852 } nwio_tcpconf_t;
853 .SP
854 #define NWTC_NOFLAGS 0x0000L
855 #define NWTC_ACC_MASK 0x0003L
856 # define NWTC_EXCL 0x00000001L
857 # define NWTC_SHARED 0x00000002L
858 # define NWTC_COPY 0x00000003L
859 #define NWTC_LOCPORT_MASK 0x0030L
860 # define NWTC_LP_UNSET 0x00000010L
861 # define NWTC_LP_SET 0x00000020L
862 # define NWTC_LP_SEL 0x00000030L
863 #define NWTC_REMADDR_MASK 0x0100L
864 # define NWTC_SET_RA 0x00000100L
865 # define NWTC_UNSET_RA 0x01000000L
866 #define NWTC_REMPORT_MASK 0x0200L
867 # define NWTC_SET_RP 0x00000200L
868 # define NWTC_UNSET_RP 0x02000000L
869 .if t .ft R
870 .fi
871 .RE
872 .PP
873 A tcp channel is considered configured when one flag in each category has
874 been selected.
875 Thus one of
876 .BR NWTC_EXCL ,
877 .B NWTC_SHARED
878 or
879 .BR NWTC_COPY ,
880 one of
881 .BR NWTC_LP_UNSET ,
882 .B NWTC_LP_SET
883 or
884 .BR NWTC_LP_SEL ,
885 one of
886 .B NWTC_SET_RA
887 or
888 .BR NWTC_UNSET_RA ,
889 and one of
890 .B NWTC_SET_RP
891 or
892 .BR NWTC_UNSET_RP .
893 .PP
894 The acc flags control the access to a certain TCP port.
895 .B NWTC_EXCL
896 means exclusive access.
897 An attempt to configure a channel will be denied if the same port is specified
898 as that of a channel that requested exclusive access.
899 .B NWTC_SHARED
900 indicates that several channels use the same port but cooperate.
901 If the shared mode is specified for one channel than all other channel that
902 use the same port should also be configured with the
903 .B NWTC_SHARED
904 flag.
905 .B NWTC_COPY
906 is specified when the programmer does not care about other channels.
907 This is the default.
908 .PP
909 The locport flags control which TCP port is used for communication.
910 .B NWTC_LP_UNSET
911 indicates the absence of a local port.
912 This is the default.
913 .B NWTC_LP_SET
914 means that the
915 .B nwtc_locport
916 field contains the local port to be used by TCP.
917 This value must be in network byte order (see
918 .BR hton (3).)
919 .B NWTC_LP_SEL
920 requests the TCP server to pick a port.
921 This port will be in the range from 32768 to 65535 and will be unique.
922 .LP
923 The
924 .B remaddr
925 flags specify which hosts are acceptable for connections.
926 .B NWTC_SET_RA
927 indicates that only connection to the host specified in
928 .B nwtc_remaddr
929 are acceptable.
930 .B Nwtc_remaddr
931 should be in network byte order (see
932 .BR hton (3).)
933 .B NWTC_UNSET_RA
934 allows every host on the other side of a connection.
935 This is the default.
936 .PP
937 The
938 .B remport
939 flags specify which remote ports are acceptable for connections.
940 .B NWTC_SET_RP
941 indicates that only the port specified in
942 .B nwtc_remport
943 is acceptable.
944 .B NWTC_UNSET_RP
945 allows every port on the other side of a connection.
946 This is the default.
947 .PP
948 .ft B
949 ioctl(\fIfd\fP, NWIOTCPSHUTDOWN)
950 .ft R
951 .PP
952 The
953 .B NWIOTCPSHUTDOWN
954 tells the TCP/IP server that no more data will be sent over the channel
955 specified by
956 .IR fd .
957 This command can be issued when the channel is connected to a remote TCP/IP
958 server.
959 The TCP/IP server will tell the remote TCP/IP server and the client of the
960 remote TCP/IP server will receive an end-of-file indication.
961 .PP
962 .ft B
963 ioctl(\fIfd\fP, NWIOGTCPOPT, &struct nwio_tcpopt)
964 .br
965 ioctl(\fIfd\fP, NWIOSTCPOPT, &struct nwio_tcpopt)
966 .ft R
967 .PP
968 The behaviour of a TCP channel may be changed by setting a number of
969 options. The TCP options can be obtained with the
970 .B NWIOGTCPOPT
971 ioctl and set with the
972 .B NWIOSTCPOPT
973 ioctl. The options are passed in a
974 .B struct nwio_tcpopt
975 as defined in <net/gen/tcp_io.h>:
976 .PP
977 .RS
978 .nf
979 .if t .ft C
980 typedef struct nwio_tcpopt
981 {
982 u32_t nwto_flags;
983 } nwio_tcpopt_t;
984 .SP
985 #define NWTO_NOFLAG 0x0000L
986 #define NWTO_SND_URG_MASK 0x0001L
987 # define NWTO_SND_URG 0x00000001L
988 # define NWTO_SND_NOTURG 0x00010000L
989 #define NWTO_RCV_URG_MASK 0x0002L
990 # define NWTO_RCV_URG 0x00000002L
991 # define NWTO_RCV_NOTURG 0x00020000L
992 #define NWTO_BSD_URG_MASK 0x0004L
993 # define NWTO_BSD_URG 0x00000004L
994 #define NWTO_DEL_RST_MASK 0x0008L
995 # define NWTO_DEL_RST 0x00000008L
996 .if t .ft R
997 .fi
998 .RE
999 .PP
1000 The
1001 .B NWTO_SND_URG
1002 option causes bytes written to the channel to be send out as urgent data.
1003 On receiving an
1004 .B EURG
1005 error the
1006 .B NWTO_RCV_URG
1007 option must be set to switch over to reading urgent data. When all urgent
1008 data has been read an
1009 .B ENOURG
1010 error will follow,
1011 indicating that the option must be cleared with
1012 .BR NWTO_RCV_NOTURG .
1013 Alas the BSD implementation of urgent data disagrees with the RFC's, so to
1014 be BSD compatible one must set the
1015 .B NWTO_BSD_URG
1016 option beforehand on a channel that is to send or receive urgent data.
1017 Given that the BSD implementation is the regarded as the TCP/IP standard one
1018 should always use the BSD style. The
1019 .B NWTO_DEL_RST
1020 option delays a failure response on a connect to the same port as the
1021 current open connection. Without this option a connect would fail if
1022 a server is not yet listening. With this option a connect will linger
1023 on until the server starts listening. This option is useful for a server
1024 that opens a connection, tells the remote end the local port number and
1025 then listens (FTP), or for a program that forks off servers for incoming
1026 connections (TELNET). A new connection may come in before a new listen
1027 can be started, so it is nice if the new connect doesn't fail. Use this
1028 option only when it is clearly needed.
1029 .SS "UDP Functions"
1030 .PP
1031 .ft B
1032 ioctl(\fIfd\fP, NWIOGUDPOPT, &struct nwio_udpopt)
1033 .ft R
1034 .PP
1035 The
1036 .B NWIOGUDPOPT
1037 ioctl returns the current options that result from the default options
1038 and the options set with
1039 .BR NWIOSUDPOPT .
1040 When
1041 .B NWUO_LP_SEL
1042 or
1043 .B NWUO_LP_SET
1044 is selected the local port is returned in
1045 .BR nwuo_locport .
1046 When
1047 .B NWUO_RP_SET
1048 is selected the remote port is returned in
1049 .BR nwuo_remport .
1050 The local address is always returned in
1051 .BR nwuo_locaddr ,
1052 and when
1053 .B NWUO_RA_SET
1054 is selected the remote address is returned in
1055 .BR nwuo_remaddr .
1056 .PP
1057 .ft B
1058 ioctl(\fIfd\fP, NWIOSUDPOPT, &struct nwio_udpopt)
1059 .ft R
1060 .PP
1061 A UDP channel must be configured using the
1062 .B NWIOSUDPOPT
1063 ioctl before any data can be read or written.
1064 .B NWIOSUDPOPT
1065 takes two parameters, a file descriptor to an open UDP device and
1066 pointer to a
1067 .B nwio_udpopt
1068 structure that describes the requested configuration.
1069 The
1070 .B nwio_udpopt
1071 structure is defined in <net/gen/udp_io.h> as:
1072 .PP
1073 .RS
1074 .nf
1075 .if t .ft C
1076 typedef struct nwio_udpopt
1077 {
1078 unsigned long nwuo_flags;
1079 udpport_t nwuo_locport;
1080 udpport_t nwuo_remport;
1081 ipaddr_t nwuo_locaddr;
1082 ipaddr_t nwuo_remaddr;
1083 } nwio_udpopt_t;
1084 .SP
1085 #define NWUO_NOFLAGS 0x0000L
1086 #define NWUO_ACC_MASK 0x0003L
1087 #define NWUO_EXCL 0x00000001L
1088 #define NWUO_SHARED 0x00000002L
1089 #define NWUO_COPY 0x00000003L
1090 #define NWUO_LOCPORT_MASK 0x000CL
1091 #define NWUO_LP_SEL 0x00000004L
1092 #define NWUO_LP_SET 0x00000008L
1093 #define NWUO_LP_ANY 0x0000000CL
1094 #define NWUO_LOCADDR_MASK 0x0010L
1095 #define NWUO_EN_LOC 0x00000010L
1096 #define NWUO_DI_LOC 0x00100000L
1097 #define NWUO_BROAD_MASK 0x0020L
1098 #define NWUO_EN_BROAD 0x00000020L
1099 #define NWUO_DI_BROAD 0x00200000L
1100 #define NWUO_REMPORT_MASK 0x0100L
1101 #define NWUO_RP_SET 0x00000100L
1102 #define NWUO_RP_ANY 0x01000000L
1103 #define NWUO_REMADDR_MASK 0x0200L
1104 #define NWUO_RA_SET 0x00000200L
1105 #define NWUO_RA_ANY 0x02000000L
1106 #define NWUO_RW_MASK 0x1000L
1107 #define NWUO_RWDATONLY 0x00001000L
1108 #define NWUO_RWDATALL 0x10000000L
1109 #define NWUO_IPOPT_MASK 0x2000L
1110 #define NWUO_EN_IPOPT 0x00002000L
1111 #define NWUO_DI_IPOPT 0x20000000L
1112 .if t .ft R
1113 .fi
1114 .RE
1115 .PP
1116 A UDP channel is considered configured when one flag in each category has been
1117 selected.
1118 Thus one of
1119 .BR NWUO_EXCL ,
1120 .B NWUO_SHARED
1121 or
1122 .BR NWUO_COPY ,
1123 one of
1124 .BR NWUO_LP_SEL ,
1125 .B NWUO_LP_SET
1126 or
1127 .BR NWUO_LP_ANY ,
1128 one of
1129 .B NWUO_EN_LOC
1130 or
1131 .BR NWUO_DI_LOC ,
1132 one of
1133 .BR NWUO_EN_BROAD ,
1134 or
1135 .BR NWUO_DI_BROAD ,
1136 one of
1137 .BR NWUO_RP_SET ,
1138 or
1139 .BR NWUO_RP_ANY ,
1140 one of
1141 .BR NWUO_RA_SET ,
1142 or
1143 .BR NWUO_RA_ANY ,
1144 one of
1145 .BR NWUO_RWDATONLY ,
1146 or
1147 .BR NWUO_RWDATALL ,
1148 and one of
1149 .BR NWUO_EN_IPOPT ,
1150 or
1151 .BR NWUO_DI_IPOPT .
1152 The acc flags control the access to a certain UDP port.
1153 .B NWUO_EXCL
1154 means exclusive access:
1155 no other channel can use this port.
1156 .B NWUO_SHARED
1157 means shared access:
1158 only channels that specify shared access can use this port
1159 and all packets that are received are handed to at most one channel.
1160 .B NWUO_COPY
1161 imposes no access restriction and all channels get a copy of every received
1162 packet for that port.
1163 .PP
1164 The
1165 .B locport
1166 flags control the selection of the UDP port for this channel.
1167 .B NWUO_LP_SEL
1168 requests the server to pick a port.
1169 This port will be in the range from 32768 to 65535 and it will be unique.
1170 .B NWUO_LP_SET
1171 sets the local port to the value of the
1172 .B nwuo_locport
1173 field.
1174 .B NWUO_LP_ANY
1175 does not select a port.
1176 Reception of data is therefore not possible but it is
1177 possible to send data.
1178 .PP
1179 The
1180 .B locaddr
1181 flags control the reception of packets.
1182 .B NWUO_EN_LOC
1183 enables the reception of packets with the local IP address as destination.
1184 .B NWUO_DI_LOC
1185 disables the reception of packet for the local IP address.
1186 .PP
1187 The
1188 .B broad
1189 flags control the reception of broadcast packets.
1190 .B NWUO_EN_BROAD
1191 enables the reception of broadcast packets and
1192 .B NWUO_DI_BROAD
1193 disables the reception of broadcast packets.
1194 .PP
1195 The
1196 .B remport
1197 flags let the client to specify one specific remote UDP port or
1198 to allow any remote port.
1199 .B NWUO_RP_SET
1200 sets the remote UDP port to the value of
1201 .BR nwuo_remport .
1202 Only packets with a matching remote port will be delivered
1203 and all packets will be sent to that port.
1204 .B NWUO_RP_ANY
1205 allows reception of packets form any port and when transmitting packets the
1206 remote port has to be specified.
1207 .PP
1208 The
1209 .B remaddr
1210 flags control the remote IP address.
1211 .B NWUO_RA_SET
1212 sets the remote IP address the value of
1213 .BR nwuo_remaddr .
1214 Only packets from that address will be delivered and all packets will be sent
1215 to that address.
1216 .B NWUO_RA_ANY
1217 allows reception of packets from any host and when transmitting packets the
1218 remote host has to be specified.
1219 .PP
1220 The
1221 .B rw
1222 flags control the format of the data to be sent or received.
1223 With
1224 .B NWUO_RWDATONLY
1225 only the data part of a UDP packet is sent to the server and only the data
1226 part is received from the server.
1227 The
1228 .B NWUO_RWDATALL
1229 mode presents the data part of a UDP packet with a header that contains
1230 the source and destination IP address, source and destination UDP ports,
1231 the IP options, etc.
1232 The server expects such a header in front of the data to be transmitted.
1233 .ig \" Some for Philip to explain properly:
1234 The header is defined in <net/gen/udp_hdr.h> and looks like this:
1235 .PP
1236 .RS
1237 .nf
1238 .if t .ft C
1239 typedef struct udp_io_hdr
1240 {
1241 ipaddr_t uih_src_addr;
1242 ipaddr_t uih_dst_addr;
1243 udpport_t uih_src_port;
1244 udpport_t uih_dst_port;
1245 u16_t uih_ip_opt_len;
1246 u16_t uih_data_len;
1247 } udp_io_hdr_t;
1248 .if t .ft R
1249 .fi
1250 .RE
1251 .PP
1252 The first four fields are the source and destination IP addresses and
1253 ports.
1254 .B Uih_ip_opt_len
1255 is ???.
1256 .B Uih_data_len
1257 should equal the length of the packet data (packet lenght minus the
1258 header.) ???
1259 ..
1260 .PP
1261 The
1262 .B ipopt
1263 flags control the delivery and transmission of IP options.
1264 When
1265 .B NWUO_EN_IPOPT
1266 is set IP, options will be delivered and sent.
1267 When
1268 .B NWUO_DI_IPOPT
1269 is set IP option will be stripped from received packets and no IP options will
1270 be sent.
1271 .ig \" MINIX 3 doesn't have this stuff (yet? ever?)
1272 .SS "UDP Library Functions"
1273 .PP
1274 The following routines provide an somewhat easier to use interface to UDP than
1275 the routines described above (\fBtcpip_open\fP, \fBudp_ioc_setopt\fP,
1276 \fBtcpip_read\fP and \fBtcpip_write\fP).
1277 .LP
1278 .sC
1279 errstat
1280 udp_connect(udp_cap, chan_cap, srcport, dstport, dstaddr, flags)
1281 capability *udp_cap;
1282 capability *chan_cap;
1283 udpport_t srcport;
1284 udpport_t dstport;
1285 ipaddr_t dstaddr;
1286 int flags;
1287 .eC
1288 .kW "\fIudp_connect\fP"
1289 \fIUdp_connect\fP combines the functionality of \fItcpip_open\fP and
1290 \fIudp_ioc_setopt\fP.
1291 A pointer to a UDP server capability should be passed in \fIudp_cap\fP, and
1292 the channel capability will be returned in the capability pointed to by
1293 \fIchan_cap\fP.
1294 If \fIsrcport\fP is 0 then an unused port will be selected, otherwise the local
1295 port will be set to \fIsrcport\fP.
1296 If \fIdstport\fP is non-zero then communication will be restricted to remote ports
1297 that equal to \fIdstport\fP, otherwise any data can be sent to or received from
1298 any remote port.
1299 The same thing applies to \fIdstaddr\fP; if \fIdstaddr\fP is non-zero then
1300 only \fIdstaddr\fP can be reached.
1301 Currently no flags are defined so \fIflags\fP should be 0.
1302 .sH
1303 udp_reconnect
1304 .LP
1305 .sC
1306 errstat
1307 udp_reconnect(chan_cap, srcport, dstport, dstaddr, flags)
1308 capability *chan_cap;
1309 udpport_t srcport;
1310 udpport_t dstport;
1311 ipaddr_t dstaddr;
1312 int flags;
1313 .eC
1314 .kW "\fIudp_reconnect\fP"
1315 \fIUdp_reconnect\fP is the same as \fIudp_connect\fP except that an existing
1316 channel capability is (re)used.
1317 .sH
1318 udp_read_msg
1319 .LP
1320 .sC
1321 errstat
1322 udp_read_msg(chan_cap, msg, msglen, actlen, flags)
1323 capability *chan_cap;
1324 char *msg;
1325 int msglen;
1326 int *actlen;
1327 int flags;
1328 .eC
1329 .kW "\fIudp_read_msg\fP"
1330 \fIUdp_read_msg\fP delivers a UDP packet.
1331 The data part of the UDP packet is
1332 prepended with an \fIudp_io_hdr\fP.
1333 The actual length of the possibly truncated packet is returned in \fIactlen\fP.
1334 No flags are defined so \fIflags\fP should be 0.
1335 .sH
1336 udp_write_msg
1337 .LP
1338 .sC
1339 errstat
1340 udp_write_msg(chan_cap, msg, msglen, flags)
1341 capability *chan_cap;
1342 char *msg;
1343 int msglen;
1344 int flags;
1345 .eC
1346 .kW "\fIudp_write_msg\fP"
1347 A UDP packet can be sent with \fIudp_write_msg\fP.
1348 \fIMsg\fP should point to a \fIudp_io_hdr\fP followed by the data part of the
1349 UDP packet.
1350 The \fIuih_dst_addr\fP and \fIuih_dst_port\fP fields of the \fIudp_io_hdr\fP
1351 should be filled in if no values are specified in the \fIudp_connect\fP,
1352 or \fIudp_reconnect\fP.
1353 .sH
1354 udp_close
1355 .LP
1356 .sC
1357 errstat
1358 udp_close(chan_cap, flags)
1359 capability *chan_cap;
1360 int flags;
1361 .eC
1362 .kW "\fIudp_close\fP"
1363 \fIUdp_close\fP cleans up the administration kept by the UDP library but does
1364 not destroy the capability.
1365 The function should be used if the capability is passed to another process
1366 and should continue to exist.
1367 No flags are defined so \fIflags\fP should be 0.
1368 .sH
1369 udp_destroy
1370 .LP
1371 .sC
1372 errstat
1373 udp_destroy(chan_cap, flags)
1374 capability *chan_cap;
1375 int flags;
1376 .eC
1377 .kW "\fIudp_destroy\fP"
1378 \fIUdp_destroy\fP not only cleans up the administration kept by the UDP library
1379 but also destroys the channel capability.
1380 ..
1381 .SH FILES
1382 .IP /dev/eth* \w'/dev/psip*mmm'u
1383 Raw ethernet. The numbers in the device names are decimal, so one may see
1384 names from
1385 .B eth0
1386 to
1387 .BR eth15 .
1389 .IP /dev/psip*
1390 First and second Pseudo IP network.
1391 .IP /dev/ip*
1392 IP devices for two ethernets and two Pseudo IP networks.
1393 .IP /dev/tcp*
1394 TCP devices for same four networks.
1395 .IP /dev/udp*
1396 UDP devices.
1397 .IP "/dev/eth, /dev/psip, /dev/ip, /dev/tcp, /dev/udp"
1398 Devices for the default network, links to the devices above.
1399 .B Eth
1400 is only present if ethernet is the default,
1401 .B psip
1402 only for pseudo IP.
1403 .SH "SEE ALSO"
1404 .BR hton (3),
1405 .BR oneC_sum (3),
1406 .BR inet (8),
1407 .BR boot (8).
1408 .SH DIAGNOSTICS
1409 Several errors may be returned by the TCP/IP server. The error code
1410 is found in the
1411 .B errno
1412 variable if the
1413 .BR read ,
1414 .BR write ,
1415 or
1416 .B ioctl
1417 call returns -1. The TCP/IP error codes defined in <errno.h> are, among others:
1418 .IP EPACKSIZE 5c
1419 This indicates an attempt to read or write with a buffer that is too
1420 large or too small.
1421 .IP ENOBUFS
1422 The TCP/IP server has insufficient memory to execute the request.
1423 .IP EBADIOCTL
1424 This indicates an attempt to execute a command the particular server
1425 does not understand.
1426 For example, a
1427 .B NWIOGTCPCONF
1428 on an ETH channel.
1429 .IP EBADMODE
1430 The request is refused because the channel is not fully configured, in the
1431 wrong state or the parameters are invalid.
1432 .IP ENETUNREACH
1433 The destination network is not reachable.
1434 .IP EHOSTUNREACH
1435 The destination host is not reachable.
1436 .IP EISCONN
1437 The channel is already connected so a second request is refused.
1438 .IP EADDRINUSE
1439 This address is in use.
1440 .IP ECONNREFUSED
1441 The connection is refused by the other side.
1442 .IP ECONNRESET
1443 The connection is reset (non-gracefully terminated) by the other side.
1444 .IP ETIMEDOUT
1445 The connection is terminated due to an expired timer.
1446 .IP EURG
1447 Urgent data is present and the current receive mode does not allow urgent data
1448 to be transferred.
1449 .IP ENOURG
1450 No urgent data is present and a request came for urgent data.
1451 .IP ENOTCONN
1452 The request requires a connected channel and the channel is not connected.
1453 .IP ESHUTDOWN
1454 The connection is shut down.
1455 That is, a
1456 .B NWIOTCPSHUTDOWN
1457 has been executed so no more data can be transmitted.
1458 .IP ENOCONN
1459 The connection does not exist.
1460 .IP EGENERIC
1461 A generic error code for extremely weird cases.
1462 .SH AUTHOR
1463 Philip Homburg (philip@cs.vu.nl)
1465 .\"
1466 .\" $PchId: ip.4,v 1.4 2001/01/08 19:58:14 philip Exp $