build.sh

   1 #! /usr/bin/env sh
   2 #       $NetBSD: build.sh,v 1.256 2012/09/29 04:02:42 tsutsui Exp $
   3 #
   4 # Copyright (c) 2001-2011 The NetBSD Foundation, Inc.
   5 # All rights reserved.
   6 #
   7 # This code is derived from software contributed to The NetBSD Foundation
   8 # by Todd Vierling and Luke Mewburn.
   9 #
  10 # Redistribution and use in source and binary forms, with or without
  11 # modification, are permitted provided that the following conditions
  12 # are met:
  13 # 1. Redistributions of source code must retain the above copyright
  14 #    notice, this list of conditions and the following disclaimer.
  15 # 2. Redistributions in binary form must reproduce the above copyright
  16 #    notice, this list of conditions and the following disclaimer in the
  17 #    documentation and/or other materials provided with the distribution.
  18 #
  19 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  20 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  21 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  22 # PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
  23 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29 # POSSIBILITY OF SUCH DAMAGE.
  30 #
  31 #
  32 # Top level build wrapper, to build or cross-build NetBSD.
  33 #
  34
  35 #
  36 # {{{ Begin shell feature tests.
  37 #
  38 # We try to determine whether or not this script is being run under
  39 # a shell that supports the features that we use.  If not, we try to
  40 # re-exec the script under another shell.  If we can't find another
  41 # suitable shell, then we print a message and exit.
  42 #
  43
  44 errmsg=''               # error message, if not empty
  45 shelltest=false         # if true, exit after testing the shell
  46 re_exec_allowed=true    # if true, we may exec under another shell
  47
  48 # Parse special command line options in $1.  These special options are
  49 # for internal use only, are not documented, and are not valid anywhere
  50 # other than $1.
  51 case "$1" in
  52 "--shelltest")
  53     shelltest=true
  54     re_exec_allowed=false
  55     shift
  56     ;;
  57 "--no-re-exec")
  58     re_exec_allowed=false
  59     shift
  60     ;;
  61 esac
  62
  63 # Solaris /bin/sh, and other SVR4 shells, do not support "!".
  64 # This is the first feature that we test, because subsequent
  65 # tests use "!".
  66 #
  67 if test -z "$errmsg"; then
  68     if ( eval '! false' ) >/dev/null 2>&1 ; then
  69         :
  70     else
  71         errmsg='Shell does not support "!".'
  72     fi
  73 fi
  74
  75 # Does the shell support functions?
  76 #
  77 if test -z "$errmsg"; then
  78     if ! (
  79         eval 'somefunction() { : ; }'
  80         ) >/dev/null 2>&1
  81     then
  82         errmsg='Shell does not support functions.'
  83     fi
  84 fi
  85
  86 # Does the shell support the "local" keyword for variables in functions?
  87 #
  88 # Local variables are not required by SUSv3, but some scripts run during
  89 # the NetBSD build use them.
  90 #
  91 # ksh93 fails this test; it uses an incompatible syntax involving the
  92 # keywords 'function' and 'typeset'.
  93 #
  94 if test -z "$errmsg"; then
  95     if ! (
  96         eval 'f() { local v=2; }; v=1; f && test x"$v" = x"1"'
  97         ) >/dev/null 2>&1
  98     then
  99         errmsg='Shell does not support the "local" keyword in functions.'
 100     fi
 101 fi
 102
 103 # Does the shell support ${var%suffix}, ${var#prefix}, and their variants?
 104 #
 105 # We don't bother testing for ${var+value}, ${var-value}, or their variants,
 106 # since shells without those are sure to fail other tests too.
 107 #
 108 if test -z "$errmsg"; then
 109     if ! (
 110         eval 'var=a/b/c ;
 111               test x"${var#*/};${var##*/};${var%/*};${var%%/*}" = \
 112                    x"b/c;c;a/b;a" ;'
 113         ) >/dev/null 2>&1
 114     then
 115         errmsg='Shell does not support "${var%suffix}" or "${var#prefix}".'
 116     fi
 117 fi
 118
 119 # Does the shell support IFS?
 120 #
 121 # zsh in normal mode (as opposed to "emulate sh" mode) fails this test.
 122 #
 123 if test -z "$errmsg"; then
 124     if ! (
 125         eval 'IFS=: ; v=":a b::c" ; set -- $v ; IFS=+ ;
 126                 test x"$#;$1,$2,$3,$4;$*" = x"4;,a b,,c;+a b++c"'
 127         ) >/dev/null 2>&1
 128     then
 129         errmsg='Shell does not support IFS word splitting.'
 130     fi
 131 fi
 132
 133 # Does the shell support ${1+"$@"}?
 134 #
 135 # Some versions of zsh fail this test, even in "emulate sh" mode.
 136 #
 137 if test -z "$errmsg"; then
 138     if ! (
 139         eval 'set -- "a a a" "b b b"; set -- ${1+"$@"};
 140               test x"$#;$1;$2" = x"2;a a a;b b b";'
 141         ) >/dev/null 2>&1
 142     then
 143         errmsg='Shell does not support ${1+"$@"}.'
 144     fi
 145 fi
 146
 147 # Does the shell support $(...) command substitution?
 148 #
 149 if test -z "$errmsg"; then
 150     if ! (
 151         eval 'var=$(echo abc); test x"$var" = x"abc"'
 152         ) >/dev/null 2>&1
 153     then
 154         errmsg='Shell does not support "$(...)" command substitution.'
 155     fi
 156 fi
 157
 158 # Does the shell support $(...) command substitution with
 159 # unbalanced parentheses?
 160 #
 161 # Some shells known to fail this test are:  NetBSD /bin/ksh (as of 2009-12),
 162 # bash-3.1, pdksh-5.2.14, zsh-4.2.7 in "emulate sh" mode.
 163 #
 164 if test -z "$errmsg"; then
 165     if ! (
 166         eval 'var=$(case x in x) echo abc;; esac); test x"$var" = x"abc"'
 167         ) >/dev/null 2>&1
 168     then
 169         # XXX: This test is ignored because so many shells fail it; instead,
 170         #      the NetBSD build avoids using the problematic construct.
 171         : ignore 'Shell does not support "$(...)" with unbalanced ")".'
 172     fi
 173 fi
 174
 175 # Does the shell support getopts or getopt?
 176 #
 177 if test -z "$errmsg"; then
 178     if ! (
 179         eval 'type getopts || type getopt'
 180         ) >/dev/null 2>&1
 181     then
 182         errmsg='Shell does not support getopts or getopt.'
 183     fi
 184 fi
 185
 186 #
 187 # If shelltest is true, exit now, reporting whether or not the shell is good.
 188 #
 189 if $shelltest; then
 190     if test -n "$errmsg"; then
 191         echo >&2 "$0: $errmsg"
 192         exit 1
 193     else
 194         exit 0
 195     fi
 196 fi
 197
 198 #
 199 # If the shell was bad, try to exec a better shell, or report an error.
 200 #
 201 # Loops are broken by passing an extra "--no-re-exec" flag to the new
 202 # instance of this script.
 203 #
 204 if test -n "$errmsg"; then
 205     if $re_exec_allowed; then
 206         for othershell in \
 207             "${HOST_SH}" /usr/xpg4/bin/sh ksh ksh88 mksh pdksh bash dash
 208             # NOTE: some shells known not to work are:
 209             # any shell using csh syntax;
 210             # Solaris /bin/sh (missing many modern features);
 211             # ksh93 (incompatible syntax for local variables);
 212             # zsh (many differences, unless run in compatibility mode).
 213         do
 214             test -n "$othershell" || continue
 215             if eval 'type "$othershell"' >/dev/null 2>&1 \
 216                 && "$othershell" "$0" --shelltest >/dev/null 2>&1
 217             then
 218                 cat <<EOF
 219 $0: $errmsg
 220 $0: Retrying under $othershell
 221 EOF
 222                 HOST_SH="$othershell"
 223                 export HOST_SH
 224                 exec $othershell "$0" --no-re-exec "$@" # avoid ${1+"$@"}
 225             fi
 226             # If HOST_SH was set, but failed the test above,
 227             # then give up without trying any other shells.
 228             test x"${othershell}" = x"${HOST_SH}" && break
 229         done
 230     fi
 231
 232     #
 233     # If we get here, then the shell is bad, and we either could not
 234     # find a replacement, or were not allowed to try a replacement.
 235     #
 236     cat <<EOF
 237 $0: $errmsg
 238
 239 The NetBSD build system requires a shell that supports modern POSIX
 240 features, as well as the "local" keyword in functions (which is a
 241 widely-implemented but non-standardised feature).
 242
 243 Please re-run this script under a suitable shell.  For example:
 244
 245         /path/to/suitable/shell $0 ...
 246
 247 The above command will usually enable build.sh to automatically set
 248 HOST_SH=/path/to/suitable/shell, but if that fails, then you may also
 249 need to explicitly set the HOST_SH environment variable, as follows:
 250
 251         HOST_SH=/path/to/suitable/shell
 252         export HOST_SH
 253         \${HOST_SH} $0 ...
 254 EOF
 255     exit 1
 256 fi
 257
 258 #
 259 # }}} End shell feature tests.
 260 #
 261
 262 progname=${0##*/}
 263 toppid=$$
 264 results=/dev/null
 265 tab='   '
 266 trap "exit 1" 1 2 3 15
 267
 268 bomb()
 269 {
 270         cat >&2 <<ERRORMESSAGE
 271
 272 ERROR: $@
 273 *** BUILD ABORTED ***
 274 ERRORMESSAGE
 275         kill ${toppid}          # in case we were invoked from a subshell
 276         exit 1
 277 }
 278
 279
 280 statusmsg()
 281 {
 282         ${runcmd} echo "===> $@" | tee -a "${results}"
 283 }
 284
 285 statusmsg2()
 286 {
 287         local msg
 288
 289         msg="${1}"
 290         shift
 291         case "${msg}" in
 292         ????????????????*)      ;;
 293         ??????????*)            msg="${msg}      ";;
 294         ?????*)                 msg="${msg}           ";;
 295         *)                      msg="${msg}                ";;
 296         esac
 297         case "${msg}" in
 298         ?????????????????????*) ;;
 299         ????????????????????)   msg="${msg} ";;
 300         ???????????????????)    msg="${msg}  ";;
 301         ??????????????????)     msg="${msg}   ";;
 302         ?????????????????)      msg="${msg}    ";;
 303         ????????????????)       msg="${msg}     ";;
 304         esac
 305         statusmsg "${msg}$*"
 306 }
 307
 308 warning()
 309 {
 310         statusmsg "Warning: $@"
 311 }
 312
 313 # Find a program in the PATH, and print the result.  If not found,
 314 # print a default.  If $2 is defined (even if it is an empty string),
 315 # then that is the default; otherwise, $1 is used as the default.
 316 find_in_PATH()
 317 {
 318         local prog="$1"
 319         local result="${2-"$1"}"
 320         local oldIFS="${IFS}"
 321         local dir
 322         IFS=":"
 323         for dir in ${PATH}; do
 324                 if [ -x "${dir}/${prog}" ]; then
 325                         result="${dir}/${prog}"
 326                         break
 327                 fi
 328         done
 329         IFS="${oldIFS}"
 330         echo "${result}"
 331 }
 332
 333 # Try to find a working POSIX shell, and set HOST_SH to refer to it.
 334 # Assumes that uname_s, uname_m, and PWD have been set.
 335 set_HOST_SH()
 336 {
 337         # Even if ${HOST_SH} is already defined, we still do the
 338         # sanity checks at the end.
 339
 340         # Solaris has /usr/xpg4/bin/sh.
 341         #
 342         [ -z "${HOST_SH}" ] && [ x"${uname_s}" = x"SunOS" ] && \
 343                 [ -x /usr/xpg4/bin/sh ] && HOST_SH="/usr/xpg4/bin/sh"
 344
 345         # Try to get the name of the shell that's running this script,
 346         # by parsing the output from "ps".  We assume that, if the host
 347         # system's ps command supports -o comm at all, it will do so
 348         # in the usual way: a one-line header followed by a one-line
 349         # result, possibly including trailing white space.  And if the
 350         # host system's ps command doesn't support -o comm, we assume
 351         # that we'll get an error message on stderr and nothing on
 352         # stdout.  (We don't try to use ps -o 'comm=' to suppress the
 353         # header line, because that is less widely supported.)
 354         #
 355         # If we get the wrong result here, the user can override it by
 356         # specifying HOST_SH in the environment.
 357         #
 358         [ -z "${HOST_SH}" ] && HOST_SH="$(
 359                 (ps -p $$ -o comm | sed -ne "2s/[ ${tab}]*\$//p") 2>/dev/null )"
 360
 361         # If nothing above worked, use "sh".  We will later find the
 362         # first directory in the PATH that has a "sh" program.
 363         #
 364         [ -z "${HOST_SH}" ] && HOST_SH="sh"
 365
 366         # If the result so far is not an absolute path, try to prepend
 367         # PWD or search the PATH.
 368         #
 369         case "${HOST_SH}" in
 370         /*)     :
 371                 ;;
 372         */*)    HOST_SH="${PWD}/${HOST_SH}"
 373                 ;;
 374         *)      HOST_SH="$(find_in_PATH "${HOST_SH}")"
 375                 ;;
 376         esac
 377
 378         # If we don't have an absolute path by now, bomb.
 379         #
 380         case "${HOST_SH}" in
 381         /*)     :
 382                 ;;
 383         *)      bomb "HOST_SH=\"${HOST_SH}\" is not an absolute path."
 384                 ;;
 385         esac
 386
 387         # If HOST_SH is not executable, bomb.
 388         #
 389         [ -x "${HOST_SH}" ] ||
 390             bomb "HOST_SH=\"${HOST_SH}\" is not executable."
 391
 392         # If HOST_SH fails tests, bomb.
 393         # ("$0" may be a path that is no longer valid, because we have
 394         # performed "cd $(dirname $0)", so don't use $0 here.)
 395         #
 396         "${HOST_SH}" build.sh --shelltest ||
 397             bomb "HOST_SH=\"${HOST_SH}\" failed functionality tests."
 398 }
 399
 400 # initdefaults --
 401 # Set defaults before parsing command line options.
 402 #
 403 initdefaults()
 404 {
 405         makeenv=
 406         makewrapper=
 407         makewrappermachine=
 408         runcmd=
 409         operations=
 410         removedirs=
 411
 412         [ -d usr.bin/make ] || cd "$(dirname $0)"
 413         [ -d usr.bin/make ] ||
 414             bomb "build.sh must be run from the top source level"
 415         [ -f share/mk/bsd.own.mk ] ||
 416             bomb "src/share/mk is missing; please re-fetch the source tree"
 417
 418         # Set various environment variables to known defaults,
 419         # to minimize (cross-)build problems observed "in the field".
 420         #
 421         # LC_ALL=C must be set before we try to parse the output from
 422         # any command.  Other variables are set (or unset) here, before
 423         # we parse command line arguments.
 424         #
 425         # These variables can be overridden via "-V var=value" if
 426         # you know what you are doing.
 427         #
 428         unsetmakeenv INFODIR
 429         unsetmakeenv LESSCHARSET
 430         unsetmakeenv MAKEFLAGS
 431         setmakeenv LC_ALL C
 432
 433         # Find information about the build platform.  This should be
 434         # kept in sync with _HOST_OSNAME, _HOST_OSREL, and _HOST_ARCH
 435         # variables in share/mk/bsd.sys.mk.
 436         #
 437         # Note that "uname -p" is not part of POSIX, but we want uname_p
 438         # to be set to the host MACHINE_ARCH, if possible.  On systems
 439         # where "uname -p" fails, prints "unknown", or prints a string
 440         # that does not look like an identifier, fall back to using the
 441         # output from "uname -m" instead.
 442         #
 443         uname_s=$(uname -s 2>/dev/null)
 444         uname_r=$(uname -r 2>/dev/null)
 445         uname_m=$(uname -m 2>/dev/null)
 446         uname_p=$(uname -p 2>/dev/null || echo "unknown")
 447         case "${uname_p}" in
 448         ''|unknown|*[^-_A-Za-z0-9]*) uname_p="${uname_m}" ;;
 449         esac
 450
 451         id_u=$(id -u 2>/dev/null || /usr/xpg4/bin/id -u 2>/dev/null)
 452
 453         # If $PWD is a valid name of the current directory, POSIX mandates
 454         # that pwd return it by default which causes problems in the
 455         # presence of symlinks.  Unsetting PWD is simpler than changing
 456         # every occurrence of pwd to use -P.
 457         #
 458         # XXX Except that doesn't work on Solaris. Or many Linuces.
 459         #
 460         unset PWD
 461         TOP=$(/bin/pwd -P 2>/dev/null || /bin/pwd 2>/dev/null)
 462
 463         # The user can set HOST_SH in the environment, or we try to
 464         # guess an appropriate value.  Then we set several other
 465         # variables from HOST_SH.
 466         #
 467         set_HOST_SH
 468         setmakeenv HOST_SH "${HOST_SH}"
 469         setmakeenv BSHELL "${HOST_SH}"
 470         setmakeenv CONFIG_SHELL "${HOST_SH}"
 471
 472         # Set defaults.
 473         #
 474         toolprefix=nb
 475
 476         # Some systems have a small ARG_MAX.  -X prevents make(1) from
 477         # exporting variables in the environment redundantly.
 478         #
 479         case "${uname_s}" in
 480         Darwin | FreeBSD | CYGWIN*)
 481                 MAKEFLAGS="-X ${MAKEFLAGS}"
 482                 ;;
 483         esac
 484
 485         # do_{operation}=true if given operation is requested.
 486         #
 487         do_expertmode=false
 488         do_rebuildmake=false
 489         do_removedirs=false
 490         do_tools=false
 491         do_cleandir=false
 492         do_obj=false
 493         do_build=false
 494         do_distribution=false
 495         do_release=false
 496         do_kernel=false
 497         do_releasekernel=false
 498         do_modules=false
 499         do_installmodules=false
 500         do_install=false
 501         do_sets=false
 502         do_sourcesets=false
 503         do_syspkgs=false
 504         do_iso_image=false
 505         do_iso_image_source=false
 506         do_live_image=false
 507         do_install_image=false
 508         do_params=false
 509         do_rump=false
 510
 511         # done_{operation}=true if given operation has been done.
 512         #
 513         done_rebuildmake=false
 514
 515         # Create scratch directory
 516         #
 517         tmpdir="${TMPDIR-/tmp}/nbbuild$$"
 518         mkdir "${tmpdir}" || bomb "Cannot mkdir: ${tmpdir}"
 519         trap "cd /; rm -r -f \"${tmpdir}\"" 0
 520         results="${tmpdir}/build.sh.results"
 521
 522         # Set source directories
 523         #
 524         setmakeenv NETBSDSRCDIR "${TOP}"
 525
 526         # Make sure KERNOBJDIR is an absolute path if defined
 527         #
 528         case "${KERNOBJDIR}" in
 529         ''|/*)  ;;
 530         *)      KERNOBJDIR="${TOP}/${KERNOBJDIR}"
 531                 setmakeenv KERNOBJDIR "${KERNOBJDIR}"
 532                 ;;
 533         esac
 534
 535         # Find the version of NetBSD
 536         #
 537         DISTRIBVER="$(${HOST_SH} ${TOP}/sys/conf/osrelease.sh)"
 538
 539         # Set the BUILDSEED to NetBSD-"N"
 540         #
 541         setmakeenv BUILDSEED "MINIX-$(${HOST_SH} ${TOP}/sys/conf/osrelease.sh -m)"
 542
 543         # Set MKARZERO to "yes"
 544         #
 545         setmakeenv MKARZERO "no"
 546
 547 }
 548
 549 getarch()
 550 {
 551         # Translate some MACHINE name aliases (known only to build.sh)
 552         # into proper MACHINE and MACHINE_ARCH names.  Save the alias
 553         # name in makewrappermachine.
 554         #
 555         case "${MACHINE}" in
 556
 557         evbearm-e[bl])
 558                 makewrappermachine=${MACHINE}
 559                 # MACHINE_ARCH is "arm" or "armeb", not "armel"
 560                 MACHINE_ARCH=earm${MACHINE##*-}
 561                 MACHINE_ARCH=${MACHINE_ARCH%el}
 562                 MACHINE=evbarm
 563                 ;;
 564
 565         evbarm-e[bl])
 566                 makewrappermachine=${MACHINE}
 567                 # MACHINE_ARCH is "arm" or "armeb", not "armel"
 568                 MACHINE_ARCH=arm${MACHINE##*-}
 569                 MACHINE_ARCH=${MACHINE_ARCH%el}
 570                 MACHINE=${MACHINE%-e[bl]}
 571                 ;;
 572
 573         evbmips-e[bl]|sbmips-e[bl])
 574                 makewrappermachine=${MACHINE}
 575                 MACHINE_ARCH=mips${MACHINE##*-}
 576                 MACHINE=${MACHINE%-e[bl]}
 577                 ;;
 578
 579         evbmips64-e[bl]|sbmips64-e[bl])
 580                 makewrappermachine=${MACHINE}
 581                 MACHINE_ARCH=mips64${MACHINE##*-}
 582                 MACHINE=${MACHINE%64-e[bl]}
 583                 ;;
 584
 585         evbsh3-e[bl])
 586                 makewrappermachine=${MACHINE}
 587                 MACHINE_ARCH=sh3${MACHINE##*-}
 588                 MACHINE=${MACHINE%-e[bl]}
 589                 ;;
 590
 591         esac
 592
 593         # Translate a MACHINE into a default MACHINE_ARCH.
 594         #
 595         case "${MACHINE}" in
 596
 597         acorn26|acorn32|cats|hpcarm|iyonix|netwinder|shark|zaurus)
 598                 MACHINE_ARCH=arm
 599                 ;;
 600
 601         evbarm)         # unspecified MACHINE_ARCH gets LE
 602                 MACHINE_ARCH=${MACHINE_ARCH:=arm}
 603                 ;;
 604
 605         hp700)
 606                 MACHINE_ARCH=hppa
 607                 ;;
 608
 609         sun2)
 610                 MACHINE_ARCH=m68000
 611                 ;;
 612
 613         amiga|atari|cesfic|hp300|luna68k|mac68k|mvme68k|news68k|next68k|sun3|x68k)
 614                 MACHINE_ARCH=m68k
 615                 ;;
 616
 617         evbmips|sbmips)         # no default MACHINE_ARCH
 618                 ;;
 619
 620         sgimips64)
 621                 makewrappermachine=${MACHINE}
 622                 MACHINE=${MACHINE%64}
 623                 MACHINE_ARCH=mips64eb
 624                 ;;
 625
 626         ews4800mips|mipsco|newsmips|sgimips|emips)
 627                 MACHINE_ARCH=mipseb
 628                 ;;
 629
 630         algor64|arc64|cobalt64|pmax64)
 631                 makewrappermachine=${MACHINE}
 632                 MACHINE=${MACHINE%64}
 633                 MACHINE_ARCH=mips64el
 634                 ;;
 635
 636         algor|arc|cobalt|hpcmips|pmax)
 637                 MACHINE_ARCH=mipsel
 638                 ;;
 639
 640         evbppc64|macppc64|ofppc64)
 641                 makewrappermachine=${MACHINE}
 642                 MACHINE=${MACHINE%64}
 643                 MACHINE_ARCH=powerpc64
 644                 ;;
 645
 646         amigappc|bebox|evbppc|ibmnws|macppc|mvmeppc|ofppc|prep|rs6000|sandpoint)
 647                 MACHINE_ARCH=powerpc
 648                 ;;
 649
 650         evbsh3)                 # no default MACHINE_ARCH
 651                 ;;
 652
 653         mmeye)
 654                 MACHINE_ARCH=sh3eb
 655                 ;;
 656
 657         dreamcast|hpcsh|landisk)
 658                 MACHINE_ARCH=sh3el
 659                 ;;
 660
 661         amd64)
 662                 MACHINE_ARCH=x86_64
 663                 ;;
 664
 665         alpha|i386|sparc|sparc64|vax|ia64)
 666                 MACHINE_ARCH=${MACHINE}
 667                 ;;
 668
 669         i[4-6]86)
 670                 # LSC FIXME: This is required as uname -m reports the actual machine.
 671         # We will be able to remove this once our triple has been cleaned up
 672         # (at this time we compile only for i386, and use an incorrect host triple)
 673                 MACHINE=i386
 674                 MACHINE_ARCH=i386
 675                 ;;
 676
 677         *)
 678                 bomb "Unknown target MACHINE: ${MACHINE}"
 679                 ;;
 680
 681         esac
 682 }
 683
 684 validatearch()
 685 {
 686         # Ensure that the MACHINE_ARCH exists (and is supported by build.sh).
 687         #
 688         case "${MACHINE_ARCH}" in
 689
 690         alpha|arm|armeb|earm|earmeb|hppa|i386|m68000|m68k|mipse[bl]|mips64e[bl]|powerpc|powerpc64|sh3e[bl]|sparc|sparc64|vax|x86_64|ia64)
 691                 ;;
 692
 693         "")
 694                 bomb "No MACHINE_ARCH provided"
 695                 ;;
 696
 697         *)
 698                 bomb "Unknown target MACHINE_ARCH: ${MACHINE_ARCH}"
 699                 ;;
 700
 701         esac
 702
 703         # Determine valid MACHINE_ARCHs for MACHINE
 704         #
 705         case "${MACHINE}" in
 706
 707         evbarm)
 708                 arches="arm armeb earm earmeb"
 709                 ;;
 710
 711         cats|iyonix|netwinder|shark|zaurus)
 712                 arches="arm earm"
 713                 ;;
 714
 715         algor|arc|cobalt|pmax)
 716                 arches="mipsel mips64el"
 717                 ;;
 718
 719         evbmips|sbmips)
 720                 arches="mipseb mipsel mips64eb mips64el"
 721                 ;;
 722
 723         sgimips)
 724                 arches="mipseb mips64eb"
 725                 ;;
 726
 727         evbsh3)
 728                 arches="sh3eb sh3el"
 729                 ;;
 730
 731         macppc|evbppc|ofppc)
 732                 arches="powerpc powerpc64"
 733                 ;;
 734         *)
 735                 oma="${MACHINE_ARCH}"
 736                 getarch
 737                 arches="${MACHINE_ARCH}"
 738                 MACHINE_ARCH="${oma}"
 739                 ;;
 740
 741         esac
 742
 743         # Ensure that MACHINE_ARCH supports MACHINE
 744         #
 745         archok=false
 746         for a in ${arches}; do
 747                 if [ "${a}" = "${MACHINE_ARCH}" ]; then
 748                         archok=true
 749                         break
 750                 fi
 751         done
 752         ${archok} ||
 753             bomb "MACHINE_ARCH '${MACHINE_ARCH}' does not support MACHINE '${MACHINE}'"
 754 }
 755
 756 # nobomb_getmakevar --
 757 # Given the name of a make variable in $1, print make's idea of the
 758 # value of that variable, or return 1 if there's an error.
 759 #
 760 nobomb_getmakevar()
 761 {
 762         [ -x "${make}" ] || return 1
 763         "${make}" -m ${TOP}/share/mk -s -B -f- _x_ <<EOF || return 1
 764 _x_:
 765         echo \${$1}
 766 # LSC FIXME: We are cross compiling, so overwrite default and build tools
 767 USETOOLS:=yes
 768 .include <bsd.prog.mk>
 769 .include <bsd.kernobj.mk>
 770 EOF
 771 }
 772
 773 # bomb_getmakevar --
 774 # Given the name of a make variable in $1, print make's idea of the
 775 # value of that variable, or bomb if there's an error.
 776 #
 777 bomb_getmakevar()
 778 {
 779         [ -x "${make}" ] || bomb "bomb_getmakevar $1: ${make} is not executable"
 780         nobomb_getmakevar "$1" || bomb "bomb_getmakevar $1: ${make} failed"
 781 }
 782
 783 # getmakevar --
 784 # Given the name of a make variable in $1, print make's idea of the
 785 # value of that variable, or print a literal '$' followed by the
 786 # variable name if ${make} is not executable.  This is intended for use in
 787 # messages that need to be readable even if $make hasn't been built,
 788 # such as when build.sh is run with the "-n" option.
 789 #
 790 getmakevar()
 791 {
 792         if [ -x "${make}" ]; then
 793                 bomb_getmakevar "$1"
 794         else
 795                 echo "\$$1"
 796         fi
 797 }
 798
 799 setmakeenv()
 800 {
 801         eval "$1='$2'; export $1"
 802         makeenv="${makeenv} $1"
 803 }
 804
 805 unsetmakeenv()
 806 {
 807         eval "unset $1"
 808         makeenv="${makeenv} $1"
 809 }
 810
 811 # Given a variable name in $1, modify the variable in place as follows:
 812 # For each space-separated word in the variable, call resolvepath.
 813 resolvepaths()
 814 {
 815         local var="$1"
 816         local val
 817         eval val=\"\${${var}}\"
 818         local newval=''
 819         local word
 820         for word in ${val}; do
 821                 resolvepath word
 822                 newval="${newval}${newval:+ }${word}"
 823         done
 824         eval ${var}=\"\${newval}\"
 825 }
 826
 827 # Given a variable name in $1, modify the variable in place as follows:
 828 # Convert possibly-relative path to absolute path by prepending
 829 # ${TOP} if necessary.  Also delete trailing "/", if any.
 830 resolvepath()
 831 {
 832         local var="$1"
 833         local val
 834         eval val=\"\${${var}}\"
 835         case "${val}" in
 836         /)
 837                 ;;
 838         /*)
 839                 val="${val%/}"
 840                 ;;
 841         *)
 842                 val="${TOP}/${val%/}"
 843                 ;;
 844         esac
 845         eval ${var}=\"\${val}\"
 846 }
 847
 848 usage()
 849 {
 850         if [ -n "$*" ]; then
 851                 echo ""
 852                 echo "${progname}: $*"
 853         fi
 854         cat <<_usage_
 855
 856 Usage: ${progname} [-EhnorUuxy] [-a arch] [-B buildid] [-C cdextras]
 857                 [-D dest] [-j njob] [-M obj] [-m mach] [-N noisy]
 858                 [-O obj] [-R release] [-S seed] [-T tools]
 859                 [-V var=[value]] [-w wrapper] [-X x11src] [-Y extsrcsrc]
 860                 [-Z var]
 861                 operation [...]
 862
 863  Build operations (all imply "obj" and "tools"):
 864     build               Run "make build".
 865     distribution        Run "make distribution" (includes DESTDIR/etc/ files).
 866     release             Run "make release" (includes kernels & distrib media).
 867
 868  Other operations:
 869     help                Show this message and exit.
 870     makewrapper         Create ${toolprefix}make-\${MACHINE} wrapper and ${toolprefix}make.
 871                         Always performed.
 872     cleandir            Run "make cleandir".  [Default unless -u is used]
 873     obj                 Run "make obj".  [Default unless -o is used]
 874     tools               Build and install tools.
 875     install=idir        Run "make installworld" to \`idir' to install all sets
 876                         except \`etc'.  Useful after "distribution" or "release"
 877     kernel=conf         Build kernel with config file \`conf'
 878     releasekernel=conf  Install kernel built by kernel=conf to RELEASEDIR.
 879     installmodules=idir Run "make installmodules" to \`idir' to install all
 880                         kernel modules.
 881     modules             Build kernel modules.
 882     rumptest            Do a linktest for rump (for developers).
 883     sets                Create binary sets in
 884                         RELEASEDIR/RELEASEMACHINEDIR/binary/sets.
 885                         DESTDIR should be populated beforehand.
 886     sourcesets          Create source sets in RELEASEDIR/source/sets.
 887     syspkgs             Create syspkgs in
 888                         RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs.
 889     iso-image           Create CD-ROM image in RELEASEDIR/iso.
 890     iso-image-source    Create CD-ROM image with source in RELEASEDIR/iso.
 891     live-image          Create bootable live image in
 892                         RELEASEDIR/RELEASEMACHINEDIR/installation/liveimage.
 893     install-image       Create bootable installation image in
 894                         RELEASEDIR/RELEASEMACHINEDIR/installation/installimage.
 895     params              Display various make(1) parameters.
 896
 897  Options:
 898     -a arch        Set MACHINE_ARCH to arch.  [Default: deduced from MACHINE]
 899     -B buildid     Set BUILDID to buildid.
 900     -C cdextras    Append cdextras to CDEXTRA variable for inclusion on CD-ROM.
 901     -D dest        Set DESTDIR to dest.  [Default: destdir.MACHINE]
 902     -E             Set "expert" mode; disables various safety checks.
 903                    Should not be used without expert knowledge of the build system.
 904     -h             Print this help message.
 905     -j njob        Run up to njob jobs in parallel; see make(1) -j.
 906     -M obj         Set obj root directory to obj; sets MAKEOBJDIRPREFIX.
 907                    Unsets MAKEOBJDIR.
 908     -m mach        Set MACHINE to mach; not required if NetBSD native.
 909     -N noisy       Set the noisyness (MAKEVERBOSE) level of the build:
 910                        0   Minimal output ("quiet")
 911                        1   Describe what is occurring
 912                        2   Describe what is occurring and echo the actual command
 913                        3   Ignore the effect of the "@" prefix in make commands
 914                        4   Trace shell commands using the shell's -x flag
 915                    [Default: 2]
 916     -n             Show commands that would be executed, but do not execute them.
 917     -O obj         Set obj root directory to obj; sets a MAKEOBJDIR pattern.
 918                    Unsets MAKEOBJDIRPREFIX.
 919     -o             Set MKOBJDIRS=no; do not create objdirs at start of build.
 920     -R release     Set RELEASEDIR to release.  [Default: releasedir]
 921     -r             Remove contents of TOOLDIR and DESTDIR before building.
 922     -S seed        Set BUILDSEED to seed.  [Default: NetBSD-majorversion]
 923     -T tools       Set TOOLDIR to tools.  If unset, and TOOLDIR is not set in
 924                    the environment, ${toolprefix}make will be (re)built
 925                    unconditionally.
 926     -U             Set MKUNPRIVED=yes; build without requiring root privileges,
 927                    install from an UNPRIVED build with proper file permissions.
 928     -u             Set MKUPDATE=yes; do not run "make cleandir" first.
 929                    Without this, everything is rebuilt, including the tools.
 930     -V var=[value] Set variable \`var' to \`value'.
 931     -w wrapper     Create ${toolprefix}make script as wrapper.
 932                    [Default: \${TOOLDIR}/bin/${toolprefix}make-\${MACHINE}]
 933     -X x11src      Set X11SRCDIR to x11src.  [Default: /usr/xsrc]
 934     -x             Set MKX11=yes; build X11 from X11SRCDIR
 935     -Y extsrcsrc   Set EXTSRCSRCDIR to extsrcsrc.  [Default: /usr/extsrc]
 936     -y             Set MKEXTSRC=yes; build extsrc from EXTSRCSRCDIR
 937     -Z var         Unset ("zap") variable \`var'.
 938
 939 _usage_
 940         exit 1
 941 }
 942
 943 parseoptions()
 944 {
 945         opts='a:B:C:D:Ehj:M:m:N:nO:oR:rS:T:UuV:w:X:xY:yZ:'
 946         opt_a=no
 947
 948         if type getopts >/dev/null 2>&1; then
 949                 # Use POSIX getopts.
 950                 #
 951                 getoptcmd='getopts ${opts} opt && opt=-${opt}'
 952                 optargcmd=':'
 953                 optremcmd='shift $((${OPTIND} -1))'
 954         else
 955                 type getopt >/dev/null 2>&1 ||
 956                     bomb "Shell does not support getopts or getopt"
 957
 958                 # Use old-style getopt(1) (doesn't handle whitespace in args).
 959                 #
 960                 args="$(getopt ${opts} $*)"
 961                 [ $? = 0 ] || usage
 962                 set -- ${args}
 963
 964                 getoptcmd='[ $# -gt 0 ] && opt="$1" && shift'
 965                 optargcmd='OPTARG="$1"; shift'
 966                 optremcmd=':'
 967         fi
 968
 969         # Parse command line options.
 970         #
 971         while eval ${getoptcmd}; do
 972                 case ${opt} in
 973
 974                 -a)
 975                         eval ${optargcmd}
 976                         MACHINE_ARCH=${OPTARG}
 977                         opt_a=yes
 978                         ;;
 979
 980                 -B)
 981                         eval ${optargcmd}
 982                         BUILDID=${OPTARG}
 983                         ;;
 984
 985                 -C)
 986                         eval ${optargcmd}; resolvepaths OPTARG
 987                         CDEXTRA="${CDEXTRA}${CDEXTRA:+ }${OPTARG}"
 988                         ;;
 989
 990                 -D)
 991                         eval ${optargcmd}; resolvepath OPTARG
 992                         setmakeenv DESTDIR "${OPTARG}"
 993                         ;;
 994
 995                 -E)
 996                         do_expertmode=true
 997                         ;;
 998
 999                 -j)
1000                         eval ${optargcmd}
1001                         parallel="-j ${OPTARG}"
1002                         ;;
1003
1004                 -M)
1005                         eval ${optargcmd}; resolvepath OPTARG
1006                         case "${OPTARG}" in
1007                         \$*)    usage "-M argument must not begin with '\$'"
1008                                 ;;
1009                         *\$*)   # can use resolvepath, but can't set TOP_objdir
1010                                 resolvepath OPTARG
1011                                 ;;
1012                         *)      resolvepath OPTARG
1013                                 TOP_objdir="${OPTARG}${TOP}"
1014                                 ;;
1015                         esac
1016                         unsetmakeenv MAKEOBJDIR
1017                         setmakeenv MAKEOBJDIRPREFIX "${OPTARG}"
1018                         ;;
1019
1020                         # -m overrides MACHINE_ARCH unless "-a" is specified
1021                 -m)
1022                         eval ${optargcmd}
1023                         MACHINE="${OPTARG}"
1024                         [ "${opt_a}" != "yes" ] && getarch
1025                         ;;
1026
1027                 -N)
1028                         eval ${optargcmd}
1029                         case "${OPTARG}" in
1030                         0|1|2|3|4)
1031                                 setmakeenv MAKEVERBOSE "${OPTARG}"
1032                                 ;;
1033                         *)
1034                                 usage "'${OPTARG}' is not a valid value for -N"
1035                                 ;;
1036                         esac
1037                         ;;
1038
1039                 -n)
1040                         runcmd=echo
1041                         ;;
1042
1043                 -O)
1044                         eval ${optargcmd}
1045                         case "${OPTARG}" in
1046                         *\$*)   usage "-O argument must not contain '\$'"
1047                                 ;;
1048                         *)      resolvepath OPTARG
1049                                 TOP_objdir="${OPTARG}"
1050                                 ;;
1051                         esac
1052                         unsetmakeenv MAKEOBJDIRPREFIX
1053                         setmakeenv MAKEOBJDIR "\${.CURDIR:C,^$TOP,$OPTARG,}"
1054                         ;;
1055
1056                 -o)
1057                         MKOBJDIRS=no
1058                         ;;
1059
1060                 -R)
1061                         eval ${optargcmd}; resolvepath OPTARG
1062                         setmakeenv RELEASEDIR "${OPTARG}"
1063                         ;;
1064
1065                 -r)
1066                         do_removedirs=true
1067                         do_rebuildmake=true
1068                         ;;
1069
1070                 -S)
1071                         eval ${optargcmd}
1072                         setmakeenv BUILDSEED "${OPTARG}"
1073                         ;;
1074
1075                 -T)
1076                         eval ${optargcmd}; resolvepath OPTARG
1077                         TOOLDIR="${OPTARG}"
1078                         export TOOLDIR
1079                         ;;
1080
1081                 -U)
1082                         setmakeenv MKUNPRIVED yes
1083                         ;;
1084
1085                 -u)
1086                         setmakeenv MKUPDATE yes
1087                         ;;
1088
1089                 -V)
1090                         eval ${optargcmd}
1091                         case "${OPTARG}" in
1092                     # XXX: consider restricting which variables can be changed?
1093                         [a-zA-Z_][a-zA-Z_0-9]*=*)
1094                                 setmakeenv "${OPTARG%%=*}" "${OPTARG#*=}"
1095                                 ;;
1096                         *)
1097                                 usage "-V argument must be of the form 'var=[value]'"
1098                                 ;;
1099                         esac
1100                         ;;
1101
1102                 -w)
1103                         eval ${optargcmd}; resolvepath OPTARG
1104                         makewrapper="${OPTARG}"
1105                         ;;
1106
1107                 -X)
1108                         eval ${optargcmd}; resolvepath OPTARG
1109                         setmakeenv X11SRCDIR "${OPTARG}"
1110                         ;;
1111
1112                 -x)
1113                         setmakeenv MKX11 yes
1114                         ;;
1115
1116                 -Y)
1117                         eval ${optargcmd}; resolvepath OPTARG
1118                         setmakeenv EXTSRCSRCDIR "${OPTARG}"
1119                         ;;
1120
1121                 -y)
1122                         setmakeenv MKEXTSRC yes
1123                         ;;
1124
1125                 -Z)
1126                         eval ${optargcmd}
1127                     # XXX: consider restricting which variables can be unset?
1128                         unsetmakeenv "${OPTARG}"
1129                         ;;
1130
1131                 --)
1132                         break
1133                         ;;
1134
1135                 -'?'|-h)
1136                         usage
1137                         ;;
1138
1139                 esac
1140         done
1141
1142         # Validate operations.
1143         #
1144         eval ${optremcmd}
1145         while [ $# -gt 0 ]; do
1146                 op=$1; shift
1147                 operations="${operations} ${op}"
1148
1149                 case "${op}" in
1150
1151                 help)
1152                         usage
1153                         ;;
1154
1155                 makewrapper|cleandir|obj|tools|build|distribution|release|sets|sourcesets|syspkgs|params)
1156                         ;;
1157
1158                 iso-image)
1159                         op=iso_image    # used as part of a variable name
1160                         ;;
1161
1162                 iso-image-source)
1163                         op=iso_image_source   # used as part of a variable name
1164                         ;;
1165
1166                 live-image)
1167                         op=live_image   # used as part of a variable name
1168                         ;;
1169
1170                 install-image)
1171                         op=install_image # used as part of a variable name
1172                         ;;
1173
1174                 kernel=*|releasekernel=*)
1175                         arg=${op#*=}
1176                         op=${op%%=*}
1177                         [ -n "${arg}" ] ||
1178                             bomb "Must supply a kernel name with \`${op}=...'"
1179                         ;;
1180
1181                 modules)
1182                         op=modules
1183                         ;;
1184
1185                 install=*|installmodules=*)
1186                         arg=${op#*=}
1187                         op=${op%%=*}
1188                         [ -n "${arg}" ] ||
1189                             bomb "Must supply a directory with \`install=...'"
1190                         ;;
1191
1192                 rump|rumptest)
1193                         op=${op}
1194                         ;;
1195
1196                 *)
1197                         usage "Unknown operation \`${op}'"
1198                         ;;
1199
1200                 esac
1201                 eval do_${op}=true
1202         done
1203         [ -n "${operations}" ] || usage "Missing operation to perform."
1204
1205         # Set up MACHINE*.  On a NetBSD host, these are allowed to be unset.
1206         #
1207         if [ -z "${MACHINE}" ]; then
1208                 [ "${uname_s}" = "Minix" ] ||
1209                     bomb "MACHINE must be set, or -m must be used, for cross builds."
1210                 MACHINE=${uname_m}
1211         fi
1212         [ -n "${MACHINE_ARCH}" ] || getarch
1213         validatearch
1214
1215         # Set up default make(1) environment.
1216         #
1217         makeenv="${makeenv} TOOLDIR MACHINE MACHINE_ARCH MAKEFLAGS"
1218         [ -z "${BUILDID}" ] || makeenv="${makeenv} BUILDID"
1219         MAKEFLAGS="-de -m ${TOP}/share/mk ${MAKEFLAGS}"
1220         MAKEFLAGS="${MAKEFLAGS} MKOBJDIRS=${MKOBJDIRS-yes}"
1221         export MAKEFLAGS MACHINE MACHINE_ARCH
1222 }
1223
1224 # sanitycheck --
1225 # Sanity check after parsing command line options, before rebuildmake.
1226 #
1227 sanitycheck()
1228 {
1229         # If the PATH contains any non-absolute components (including,
1230         # but not limited to, "." or ""), then complain.  As an exception,
1231         # allow "" or "." as the last component of the PATH.  This is fatal
1232         # if expert mode is not in effect.
1233         #
1234         local path="${PATH}"
1235         path="${path%:}"        # delete trailing ":"
1236         path="${path%:.}"       # delete trailing ":."
1237         case ":${path}:/" in
1238         *:[!/]*)
1239                 if ${do_expertmode}; then
1240                         warning "PATH contains non-absolute components"
1241                 else
1242                         bomb "PATH environment variable must not" \
1243                              "contain non-absolute components"
1244                 fi
1245                 ;;
1246         esac
1247 }
1248
1249 # print_tooldir_make --
1250 # Try to find and print a path to an existing
1251 # ${TOOLDIR}/bin/${toolprefix}make, for use by rebuildmake() before a
1252 # new version of ${toolprefix}make has been built.
1253 #
1254 # * If TOOLDIR was set in the environment or on the command line, use
1255 #   that value.
1256 # * Otherwise try to guess what TOOLDIR would be if not overridden by
1257 #   /etc/mk.conf, and check whether the resulting directory contains
1258 #   a copy of ${toolprefix}make (this should work for everybody who
1259 #   doesn't override TOOLDIR via /etc/mk.conf);
1260 # * Failing that, search for ${toolprefix}make, nbmake, bmake, or make,
1261 #   in the PATH (this might accidentally find a version of make that
1262 #   does not understand the syntax used by NetBSD make, and that will
1263 #   lead to failure in the next step);
1264 # * If a copy of make was found above, try to use it with
1265 #   nobomb_getmakevar to find the correct value for TOOLDIR, and believe the
1266 #   result only if it's a directory that already exists;
1267 # * If a value of TOOLDIR was found above, and if
1268 #   ${TOOLDIR}/bin/${toolprefix}make exists, print that value.
1269 #
1270 print_tooldir_make()
1271 {
1272         local possible_TOP_OBJ
1273         local possible_TOOLDIR
1274         local possible_make
1275         local tooldir_make
1276
1277         if [ -n "${TOOLDIR}" ]; then
1278                 echo "${TOOLDIR}/bin/${toolprefix}make"
1279                 return 0
1280         fi
1281
1282         # Set host_ostype to something like "NetBSD-4.5.6-i386".  This
1283         # is intended to match the HOST_OSTYPE variable in <bsd.own.mk>.
1284         #
1285         local host_ostype="${uname_s}-$(
1286                 echo "${uname_r}" | sed -e 's/([^)]*)//g' -e 's/ /_/g'
1287                 )-$(
1288                 echo "${uname_p}" | sed -e 's/([^)]*)//g' -e 's/ /_/g'
1289                 )"
1290
1291         # Look in a few potential locations for
1292         # ${possible_TOOLDIR}/bin/${toolprefix}make.
1293         # If we find it, then set possible_make.
1294         #
1295         # In the usual case (without interference from environment
1296         # variables or /etc/mk.conf), <bsd.own.mk> should set TOOLDIR to
1297         # "${_SRC_TOP_OBJ_}/tooldir.${host_ostype}".
1298         #
1299         # In practice it's difficult to figure out the correct value
1300         # for _SRC_TOP_OBJ_.  In the easiest case, when the -M or -O
1301         # options were passed to build.sh, then ${TOP_objdir} will be
1302         # the correct value.  We also try a few other possibilities, but
1303         # we do not replicate all the logic of <bsd.obj.mk>.
1304         #
1305         for possible_TOP_OBJ in \
1306                 "${TOP_objdir}" \
1307                 "${MAKEOBJDIRPREFIX:+${MAKEOBJDIRPREFIX}${TOP}}" \
1308                 "${TOP}" \
1309                 "${TOP}/obj" \
1310                 "${TOP}/obj.${MACHINE}"
1311         do
1312                 [ -n "${possible_TOP_OBJ}" ] || continue
1313                 possible_TOOLDIR="${possible_TOP_OBJ}/tooldir.${host_ostype}"
1314                 possible_make="${possible_TOOLDIR}/bin/${toolprefix}make"
1315                 if [ -x "${possible_make}" ]; then
1316                         break
1317                 else
1318                         unset possible_make
1319                 fi
1320         done
1321
1322         # If the above didn't work, search the PATH for a suitable
1323         # ${toolprefix}make, nbmake, bmake, or make.
1324         #
1325         : ${possible_make:=$(find_in_PATH ${toolprefix}make '')}
1326         : ${possible_make:=$(find_in_PATH nbmake '')}
1327         : ${possible_make:=$(find_in_PATH bmake '')}
1328         : ${possible_make:=$(find_in_PATH make '')}
1329
1330         # At this point, we don't care whether possible_make is in the
1331         # correct TOOLDIR or not; we simply want it to be usable by
1332         # getmakevar to help us find the correct TOOLDIR.
1333         #
1334         # Use ${possible_make} with nobomb_getmakevar to try to find
1335         # the value of TOOLDIR.  Believe the result only if it's
1336         # a directory that already exists and contains bin/${toolprefix}make.
1337         #
1338         if [ -x "${possible_make}" ]; then
1339                 possible_TOOLDIR="$(
1340                         make="${possible_make}" \
1341                         nobomb_getmakevar TOOLDIR 2>/dev/null
1342                         )"
1343                 if [ $? = 0 ] && [ -n "${possible_TOOLDIR}" ] \
1344                     && [ -d "${possible_TOOLDIR}" ];
1345                 then
1346                         tooldir_make="${possible_TOOLDIR}/bin/${toolprefix}make"
1347                         if [ -x "${tooldir_make}" ]; then
1348                                 echo "${tooldir_make}"
1349                                 return 0
1350                         fi
1351                 fi
1352         fi
1353         return 1
1354 }
1355
1356 # rebuildmake --
1357 # Rebuild nbmake in a temporary directory if necessary.  Sets $make
1358 # to a path to the nbmake executable.  Sets done_rebuildmake=true
1359 # if nbmake was rebuilt.
1360 #
1361 # There is a cyclic dependency between building nbmake and choosing
1362 # TOOLDIR: TOOLDIR may be affected by settings in /etc/mk.conf, so we
1363 # would like to use getmakevar to get the value of TOOLDIR; but we can't
1364 # use getmakevar before we have an up to date version of nbmake; we
1365 # might already have an up to date version of nbmake in TOOLDIR, but we
1366 # don't yet know where TOOLDIR is.
1367 #
1368 # The default value of TOOLDIR also depends on the location of the top
1369 # level object directory, so $(getmakevar TOOLDIR) invoked before or
1370 # after making the top level object directory may produce different
1371 # results.
1372 #
1373 # Strictly speaking, we should do the following:
1374 #
1375 #    1. build a new version of nbmake in a temporary directory;
1376 #    2. use the temporary nbmake to create the top level obj directory;
1377 #    3. use $(getmakevar TOOLDIR) with the temporary nbmake to
1378 #       get the corect value of TOOLDIR;
1379 #    4. move the temporary nbmake to ${TOOLDIR}/bin/nbmake.
1380 #
1381 # However, people don't like building nbmake unnecessarily if their
1382 # TOOLDIR has not changed since an earlier build.  We try to avoid
1383 # rebuilding a temporary version of nbmake by taking some shortcuts to
1384 # guess a value for TOOLDIR, looking for an existing version of nbmake
1385 # in that TOOLDIR, and checking whether that nbmake is newer than the
1386 # sources used to build it.
1387 #
1388 rebuildmake()
1389 {
1390         make="$(print_tooldir_make)"
1391         if [ -n "${make}" ] && [ -x "${make}" ]; then
1392                 for f in usr.bin/make/*.[ch] usr.bin/make/lst.lib/*.[ch]; do
1393                         if [ "${f}" -nt "${make}" ]; then
1394                                 statusmsg "${make} outdated" \
1395                                         "(older than ${f}), needs building."
1396                                 do_rebuildmake=true
1397                                 break
1398                         fi
1399                 done
1400         else
1401                 statusmsg "No \$TOOLDIR/bin/${toolprefix}make, needs building."
1402                 do_rebuildmake=true
1403         fi
1404
1405         # Build bootstrap ${toolprefix}make if needed.
1406         if ${do_rebuildmake}; then
1407                 statusmsg "Bootstrapping ${toolprefix}make"
1408                 ${runcmd} cd "${tmpdir}"
1409                 ${runcmd} env CC="${HOST_CC-cc}" CPPFLAGS="${HOST_CPPFLAGS}" \
1410                         CFLAGS="${HOST_CFLAGS--O}" LDFLAGS="${HOST_LDFLAGS}" \
1411                         ${HOST_SH} "${TOP}/tools/make/configure" ||
1412                     bomb "Configure of ${toolprefix}make failed"
1413                 ${runcmd} ${HOST_SH} buildmake.sh ||
1414                     bomb "Build of ${toolprefix}make failed"
1415                 make="${tmpdir}/${toolprefix}make"
1416                 ${runcmd} cd "${TOP}"
1417                 ${runcmd} rm -f usr.bin/make/*.o usr.bin/make/lst.lib/*.o
1418                 done_rebuildmake=true
1419         fi
1420 }
1421
1422 # validatemakeparams --
1423 # Perform some late sanity checks, after rebuildmake,
1424 # but before createmakewrapper or any real work.
1425 #
1426 # Also create the top-level obj directory.
1427 #
1428 validatemakeparams()
1429 {
1430         if [ "${runcmd}" = "echo" ]; then
1431                 TOOLCHAIN_MISSING=no
1432                 EXTERNAL_TOOLCHAIN=""
1433         else
1434                 TOOLCHAIN_MISSING=$(bomb_getmakevar TOOLCHAIN_MISSING)
1435                 EXTERNAL_TOOLCHAIN=$(bomb_getmakevar EXTERNAL_TOOLCHAIN)
1436         fi
1437         if [ "${TOOLCHAIN_MISSING}" = "yes" ] && \
1438            [ -z "${EXTERNAL_TOOLCHAIN}" ]; then
1439                 ${runcmd} echo "ERROR: build.sh (in-tree cross-toolchain) is not yet available for"
1440                 ${runcmd} echo "        MACHINE:      ${MACHINE}"
1441                 ${runcmd} echo "        MACHINE_ARCH: ${MACHINE_ARCH}"
1442                 ${runcmd} echo ""
1443                 ${runcmd} echo "All builds for this platform should be done via a traditional make"
1444                 ${runcmd} echo "If you wish to use an external cross-toolchain, set"
1445                 ${runcmd} echo "        EXTERNAL_TOOLCHAIN=<path to toolchain root>"
1446                 ${runcmd} echo "in either the environment or mk.conf and rerun"
1447                 ${runcmd} echo "        ${progname} $*"
1448                 exit 1
1449         fi
1450
1451         # Normalise MKOBJDIRS, MKUNPRIVED, and MKUPDATE
1452         # These may be set as build.sh options or in "mk.conf".
1453         # Don't export them as they're only used for tests in build.sh.
1454         #
1455         MKOBJDIRS=$(getmakevar MKOBJDIRS)
1456         MKUNPRIVED=$(getmakevar MKUNPRIVED)
1457         MKUPDATE=$(getmakevar MKUPDATE)
1458
1459         if [ "${MKOBJDIRS}" != "no" ]; then
1460                 # Create the top-level object directory.
1461                 #
1462                 # "make obj NOSUBDIR=" can handle most cases, but it
1463                 # can't handle the case where MAKEOBJDIRPREFIX is set
1464                 # while the corresponding directory does not exist
1465                 # (rules in <bsd.obj.mk> would abort the build).  We
1466                 # therefore have to handle the MAKEOBJDIRPREFIX case
1467                 # without invoking "make obj".  The MAKEOBJDIR case
1468                 # could be handled either way, but we choose to handle
1469                 # it similarly to MAKEOBJDIRPREFIX.
1470                 #
1471                 if [ -n "${TOP_obj}" ]; then
1472                         # It must have been set by the "-M" or "-O"
1473                         # command line options, so there's no need to
1474                         # use getmakevar
1475                         :
1476                 elif [ -n "$MAKEOBJDIRPREFIX" ]; then
1477                         TOP_obj="$(getmakevar MAKEOBJDIRPREFIX)${TOP}"
1478                 elif [ -n "$MAKEOBJDIR" ]; then
1479                         TOP_obj="$(getmakevar MAKEOBJDIR)"
1480                 fi
1481                 if [ -n "$TOP_obj" ]; then
1482                         ${runcmd} mkdir -p "${TOP_obj}" ||
1483                             bomb "Can't create top level object directory" \
1484                                         "${TOP_obj}"
1485                 else
1486                         ${runcmd} "${make}" -m ${TOP}/share/mk obj NOSUBDIR= ||
1487                             bomb "Can't create top level object directory" \
1488                                         "using make obj"
1489                 fi
1490
1491                 # make obj in tools to ensure that the objdir for "tools"
1492                 # is available.
1493                 #
1494                 ${runcmd} cd tools
1495                 ${runcmd} "${make}" -m ${TOP}/share/mk obj NOSUBDIR= ||
1496                     bomb "Failed to make obj in tools"
1497                 ${runcmd} cd "${TOP}"
1498         fi
1499
1500         # Find TOOLDIR, DESTDIR, and RELEASEDIR, according to getmakevar,
1501         # and bomb if they have changed from the values we had from the
1502         # command line or environment.
1503         #
1504         # This must be done after creating the top-level object directory.
1505         #
1506         for var in TOOLDIR DESTDIR RELEASEDIR
1507         do
1508                 eval oldval=\"\$${var}\"
1509                 newval="$(getmakevar $var)"
1510                 if ! $do_expertmode; then
1511                         : ${_SRC_TOP_OBJ_:=$(getmakevar _SRC_TOP_OBJ_)}
1512                         case "$var" in
1513                         DESTDIR)
1514                                 : ${newval:=${_SRC_TOP_OBJ_}/destdir.${MACHINE}}
1515                                 makeenv="${makeenv} DESTDIR"
1516                                 ;;
1517                         RELEASEDIR)
1518                                 : ${newval:=${_SRC_TOP_OBJ_}/releasedir}
1519                                 makeenv="${makeenv} RELEASEDIR"
1520                                 ;;
1521                         esac
1522                 fi
1523                 if [ -n "$oldval" ] && [ "$oldval" != "$newval" ]; then
1524                         bomb "Value of ${var} has changed" \
1525                                 "(was \"${oldval}\", now \"${newval}\")"
1526                 fi
1527                 eval ${var}=\"\${newval}\"
1528                 eval export ${var}
1529                 statusmsg2 "${var} path:" "${newval}"
1530         done
1531
1532         # RELEASEMACHINEDIR is just a subdir name, e.g. "i386".
1533         RELEASEMACHINEDIR=$(getmakevar RELEASEMACHINEDIR)
1534
1535         # Check validity of TOOLDIR and DESTDIR.
1536         #
1537         if [ -z "${TOOLDIR}" ] || [ "${TOOLDIR}" = "/" ]; then
1538                 bomb "TOOLDIR '${TOOLDIR}' invalid"
1539         fi
1540         removedirs="${TOOLDIR}"
1541
1542         if [ -z "${DESTDIR}" ] || [ "${DESTDIR}" = "/" ]; then
1543                 if ${do_build} || ${do_distribution} || ${do_release}; then
1544                         if ! ${do_build} || \
1545                            [ "${uname_s}" != "Minix" ] || \
1546                            [ "${uname_m}" != "${MACHINE}" ]; then
1547                                 bomb "DESTDIR must != / for cross builds, or ${progname} 'distribution' or 'release'."
1548                         fi
1549                         if ! ${do_expertmode}; then
1550                                 bomb "DESTDIR must != / for non -E (expert) builds"
1551                         fi
1552                         statusmsg "WARNING: Building to /, in expert mode."
1553                         statusmsg "         This may cause your system to break!  Reasons include:"
1554                         statusmsg "            - your kernel is not up to date"
1555                         statusmsg "            - the libraries or toolchain have changed"
1556                         statusmsg "         YOU HAVE BEEN WARNED!"
1557                 fi
1558         else
1559                 removedirs="${removedirs} ${DESTDIR}"
1560         fi
1561         if ${do_build} || ${do_distribution} || ${do_release}; then
1562                 if ! ${do_expertmode} && \
1563                     [ "$id_u" -ne 0 ] && \
1564                     [ "${MKUNPRIVED}" = "no" ] ; then
1565                         bomb "-U or -E must be set for build as an unprivileged user."
1566                 fi
1567         fi
1568         if ${do_releasekernel} && [ -z "${RELEASEDIR}" ]; then
1569                 bomb "Must set RELEASEDIR with \`releasekernel=...'"
1570         fi
1571
1572         # Install as non-root is a bad idea.
1573         #
1574         if ${do_install} && [ "$id_u" -ne 0 ] ; then
1575                 if ${do_expertmode}; then
1576                         warning "Will install as an unprivileged user."
1577                 else
1578                         bomb "-E must be set for install as an unprivileged user."
1579                 fi
1580         fi
1581
1582         # If a previous build.sh run used -U (and therefore created a
1583         # METALOG file), then most subsequent build.sh runs must also
1584         # use -U.  If DESTDIR is about to be removed, then don't perform
1585         # this check.
1586         #
1587         case "${do_removedirs} ${removedirs} " in
1588         true*" ${DESTDIR} "*)
1589                 # DESTDIR is about to be removed
1590                 ;;
1591         *)
1592                 if ( ${do_build} || ${do_distribution} || ${do_release} || \
1593                     ${do_install} ) && \
1594                     [ -e "${DESTDIR}/METALOG" ] && \
1595                     [ "${MKUNPRIVED}" = "no" ] ; then
1596                         if $do_expertmode; then
1597                                 warning "A previous build.sh run specified -U."
1598                         else
1599                                 bomb "A previous build.sh run specified -U; you must specify it again now."
1600                         fi
1601                 fi
1602                 ;;
1603         esac
1604
1605         # live-image and install-image targets require binary sets
1606         # (actually DESTDIR/etc/mtree/set.* files) built with MKUNPRIVED.
1607         # If release operation is specified with live-image or install-image,
1608         # the release op should be performed with -U for later image ops.
1609         #
1610         if ${do_release} && ( ${do_live_image} || ${do_install_image} ) && \
1611             [ "${MKUNPRIVED}" = "no" ] ; then
1612                 bomb "-U must be specified on building release to create images later."
1613         fi
1614 }
1615
1616
1617 createmakewrapper()
1618 {
1619         # Remove the target directories.
1620         #
1621         if ${do_removedirs}; then
1622                 for f in ${removedirs}; do
1623                         statusmsg "Removing ${f}"
1624                         ${runcmd} rm -r -f "${f}"
1625                 done
1626         fi
1627
1628         # Recreate $TOOLDIR.
1629         #
1630         ${runcmd} mkdir -p "${TOOLDIR}/bin" ||
1631             bomb "mkdir of '${TOOLDIR}/bin' failed"
1632
1633         # If we did not previously rebuild ${toolprefix}make, then
1634         # check whether $make is still valid and the same as the output
1635         # from print_tooldir_make.  If not, then rebuild make now.  A
1636         # possible reason for this being necessary is that the actual
1637         # value of TOOLDIR might be different from the value guessed
1638         # before the top level obj dir was created.
1639         #
1640         if ! ${done_rebuildmake} && \
1641             ( [ ! -x "$make" ] || [ "$make" != "$(print_tooldir_make)" ] )
1642         then
1643                 rebuildmake
1644         fi
1645
1646         # Install ${toolprefix}make if it was built.
1647         #
1648         if ${done_rebuildmake}; then
1649                 ${runcmd} rm -f "${TOOLDIR}/bin/${toolprefix}make"
1650                 ${runcmd} cp "${make}" "${TOOLDIR}/bin/${toolprefix}make" ||
1651                     bomb "Failed to install \$TOOLDIR/bin/${toolprefix}make"
1652                 make="${TOOLDIR}/bin/${toolprefix}make"
1653                 statusmsg "Created ${make}"
1654         fi
1655
1656         # Build a ${toolprefix}make wrapper script, usable by hand as
1657         # well as by build.sh.
1658         #
1659         if [ -z "${makewrapper}" ]; then
1660                 makewrapper="${TOOLDIR}/bin/${toolprefix}make-${makewrappermachine:-${MACHINE}}"
1661                 [ -z "${BUILDID}" ] || makewrapper="${makewrapper}-${BUILDID}"
1662         fi
1663
1664         ${runcmd} rm -f "${makewrapper}"
1665         if [ "${runcmd}" = "echo" ]; then
1666                 echo 'cat <<EOF >'${makewrapper}
1667                 makewrapout=
1668         else
1669                 makewrapout=">>\${makewrapper}"
1670         fi
1671
1672         case "${KSH_VERSION:-${SH_VERSION}}" in
1673         *PD\ KSH*|*MIRBSD\ KSH*)
1674                 set +o braceexpand
1675                 ;;
1676         esac
1677
1678         eval cat <<EOF ${makewrapout}
1679 #! ${HOST_SH}
1680 # Set proper variables to allow easy "make" building of a NetBSD subtree.
1681 # Generated from:  \$NetBSD: build.sh,v 1.256 2012/09/29 04:02:42 tsutsui Exp $
1682 # with these arguments: ${_args}
1683 #
1684
1685 EOF
1686         {
1687                 for f in ${makeenv}; do
1688                         if eval "[ -z \"\${$f}\" -a \"\${${f}-X}\" = \"X\" ]"; then
1689                                 eval echo "unset ${f}"
1690                         else
1691                                 eval echo "${f}=\'\$$(echo ${f})\'\;\ export\ ${f}"
1692                         fi
1693                 done
1694
1695                 eval cat <<EOF
1696 MAKEWRAPPERMACHINE=${makewrappermachine:-${MACHINE}}; export MAKEWRAPPERMACHINE
1697 USETOOLS=yes; export USETOOLS
1698 # LSC We are cross compiling, so do not install to root!
1699 MKINSTALLBOOT=no; export MKINSTALLBOOT
1700 MKGCC=yes; export MKGCC
1701 EOF
1702         } | eval sort -u "${makewrapout}"
1703         eval cat <<EOF "${makewrapout}"
1704
1705 exec "\${TOOLDIR}/bin/${toolprefix}make" \${1+"\$@"}
1706 EOF
1707         [ "${runcmd}" = "echo" ] && echo EOF
1708         ${runcmd} chmod +x "${makewrapper}"
1709         statusmsg2 "Updated makewrapper:" "${makewrapper}"
1710 }
1711
1712 make_in_dir()
1713 {
1714         dir="$1"
1715         op="$2"
1716         ${runcmd} cd "${dir}" ||
1717             bomb "Failed to cd to \"${dir}\""
1718         ${runcmd} "${makewrapper}" ${parallel} ${op} ||
1719             bomb "Failed to make ${op} in \"${dir}\""
1720         ${runcmd} cd "${TOP}" ||
1721             bomb "Failed to cd back to \"${TOP}\""
1722 }
1723
1724 buildtools()
1725 {
1726         if [ "${MKOBJDIRS}" != "no" ]; then
1727                 ${runcmd} "${makewrapper}" ${parallel} obj-tools ||
1728                     bomb "Failed to make obj-tools"
1729         fi
1730         if [ "${MKUPDATE}" = "no" ]; then
1731                 make_in_dir tools cleandir
1732         fi
1733         make_in_dir tools dependall
1734         make_in_dir tools install
1735         statusmsg "Tools built to ${TOOLDIR}"
1736 }
1737
1738 getkernelconf()
1739 {
1740         kernelconf="$1"
1741         if [ "${MKOBJDIRS}" != "no" ]; then
1742                 # The correct value of KERNOBJDIR might
1743                 # depend on a prior "make obj" in
1744                 # ${KERNSRCDIR}/${KERNARCHDIR}/compile.
1745                 #
1746                 KERNSRCDIR="$(getmakevar KERNSRCDIR)"
1747                 KERNARCHDIR="$(getmakevar KERNARCHDIR)"
1748                 make_in_dir "${KERNSRCDIR}/${KERNARCHDIR}/compile" obj
1749         fi
1750         KERNCONFDIR="$(getmakevar KERNCONFDIR)"
1751         KERNOBJDIR="$(getmakevar KERNOBJDIR)"
1752         case "${kernelconf}" in
1753         */*)
1754                 kernelconfpath="${kernelconf}"
1755                 kernelconfname="${kernelconf##*/}"
1756                 ;;
1757         *)
1758                 kernelconfpath="${KERNCONFDIR}/${kernelconf}"
1759                 kernelconfname="${kernelconf}"
1760                 ;;
1761         esac
1762         kernelbuildpath="${KERNOBJDIR}/${kernelconfname}"
1763 }
1764
1765 buildkernel()
1766 {
1767         if ! ${do_tools} && ! ${buildkernelwarned:-false}; then
1768                 # Building tools every time we build a kernel is clearly
1769                 # unnecessary.  We could try to figure out whether rebuilding
1770                 # the tools is necessary this time, but it doesn't seem worth
1771                 # the trouble.  Instead, we say it's the user's responsibility
1772                 # to rebuild the tools if necessary.
1773                 #
1774                 statusmsg "Building kernel without building new tools"
1775                 buildkernelwarned=true
1776         fi
1777         getkernelconf $1
1778         statusmsg2 "Building kernel:" "${kernelconf}"
1779         statusmsg2 "Build directory:" "${kernelbuildpath}"
1780         ${runcmd} mkdir -p "${kernelbuildpath}" ||
1781             bomb "Cannot mkdir: ${kernelbuildpath}"
1782         if [ "${MKUPDATE}" = "no" ]; then
1783                 make_in_dir "${kernelbuildpath}" cleandir
1784         fi
1785         [ -x "${TOOLDIR}/bin/${toolprefix}config" ] \
1786         || bomb "${TOOLDIR}/bin/${toolprefix}config does not exist. You need to \"$0 tools\" first."
1787         ${runcmd} "${TOOLDIR}/bin/${toolprefix}config" -b "${kernelbuildpath}" \
1788                 -s "${TOP}/sys" "${kernelconfpath}" ||
1789             bomb "${toolprefix}config failed for ${kernelconf}"
1790         make_in_dir "${kernelbuildpath}" depend
1791         make_in_dir "${kernelbuildpath}" all
1792
1793         if [ "${runcmd}" != "echo" ]; then
1794                 statusmsg "Kernels built from ${kernelconf}:"
1795                 kernlist=$(awk '$1 == "config" { print $2 }' ${kernelconfpath})
1796                 for kern in ${kernlist:-netbsd}; do
1797                         [ -f "${kernelbuildpath}/${kern}" ] && \
1798                             echo "  ${kernelbuildpath}/${kern}"
1799                 done | tee -a "${results}"
1800         fi
1801 }
1802
1803 releasekernel()
1804 {
1805         getkernelconf $1
1806         kernelreldir="${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/kernel"
1807         ${runcmd} mkdir -p "${kernelreldir}"
1808         kernlist=$(awk '$1 == "config" { print $2 }' ${kernelconfpath})
1809         for kern in ${kernlist:-netbsd}; do
1810                 builtkern="${kernelbuildpath}/${kern}"
1811                 [ -f "${builtkern}" ] || continue
1812                 releasekern="${kernelreldir}/${kern}-${kernelconfname}.gz"
1813                 statusmsg2 "Kernel copy:" "${releasekern}"
1814                 if [ "${runcmd}" = "echo" ]; then
1815                         echo "gzip -c -9 < ${builtkern} > ${releasekern}"
1816                 else
1817                         gzip -c -9 < "${builtkern}" > "${releasekern}"
1818                 fi
1819         done
1820 }
1821
1822 buildmodules()
1823 {
1824         setmakeenv MKBINUTILS no
1825         if ! ${do_tools} && ! ${buildmoduleswarned:-false}; then
1826                 # Building tools every time we build modules is clearly
1827                 # unnecessary as well as a kernel.
1828                 #
1829                 statusmsg "Building modules without building new tools"
1830                 buildmoduleswarned=true
1831         fi
1832
1833         statusmsg "Building kernel modules for NetBSD/${MACHINE} ${DISTRIBVER}"
1834         if [ "${MKOBJDIRS}" != "no" ]; then
1835                 make_in_dir sys/modules obj
1836         fi
1837         if [ "${MKUPDATE}" = "no" ]; then
1838                 make_in_dir sys/modules cleandir
1839         fi
1840         make_in_dir sys/modules dependall
1841         make_in_dir sys/modules install
1842
1843         statusmsg "Successful build of kernel modules for NetBSD/${MACHINE} ${DISTRIBVER}"
1844 }
1845
1846 installmodules()
1847 {
1848         dir="$1"
1849         ${runcmd} "${makewrapper}" INSTALLMODULESDIR="${dir}" installmodules ||
1850             bomb "Failed to make installmodules to ${dir}"
1851         statusmsg "Successful installmodules to ${dir}"
1852 }
1853
1854 installworld()
1855 {
1856         dir="$1"
1857         ${runcmd} "${makewrapper}" INSTALLWORLDDIR="${dir}" installworld ||
1858             bomb "Failed to make installworld to ${dir}"
1859         statusmsg "Successful installworld to ${dir}"
1860 }
1861
1862 # Run rump build&link tests.
1863 #
1864 # To make this feasible for running without having to install includes and
1865 # libraries into destdir (i.e. quick), we only run ld.  This is possible
1866 # since the rump kernel is a closed namespace apart from calls to rumpuser.
1867 # Therefore, if ld complains only about rumpuser symbols, rump kernel
1868 # linking was successful.
1869 #
1870 # We test that rump links with a number of component configurations.
1871 # These attempt to mimic what is encountered in the full build.
1872 # See list below.  The list should probably be either autogenerated
1873 # or managed elsewhere; keep it here until a better idea arises.
1874 #
1875 # Above all, note that THIS IS NOT A SUBSTITUTE FOR A FULL BUILD.
1876 #
1877
1878 RUMP_LIBSETS='
1879         -lrump,
1880         -lrumpvfs -lrump,
1881         -lrumpvfs -lrumpdev -lrump,
1882         -lrumpnet -lrump,
1883         -lrumpkern_tty -lrumpvfs -lrump,
1884         -lrumpfs_tmpfs -lrumpvfs -lrump,
1885         -lrumpfs_ffs -lrumpfs_msdos -lrumpvfs -lrumpdev_disk -lrumpdev -lrump,
1886         -lrumpnet_virtif -lrumpnet_netinet -lrumpnet_net -lrumpnet -lrump,
1887         -lrumpnet_sockin -lrumpfs_smbfs -lrumpdev_netsmb
1888             -lrumpkern_crypto -lrumpdev -lrumpnet -lrumpvfs -lrump,
1889         -lrumpnet_sockin -lrumpfs_nfs -lrumpnet -lrumpvfs -lrump,
1890         -lrumpdev_cgd -lrumpdev_raidframe -lrumpdev_disk -lrumpdev_rnd
1891             -lrumpdev_dm -lrumpdev -lrumpvfs -lrumpkern_crypto -lrump'
1892 dorump()
1893 {
1894         local doclean=""
1895         local doobjs=""
1896
1897         # we cannot link libs without building csu, and that leads to lossage
1898         [ "${1}" != "rumptest" ] && bomb 'build.sh rump not yet functional. ' \
1899             'did you mean "rumptest"?'
1900
1901         # create obj and distrib dirs
1902         if [ "${MKOBJDIRS}" != "no" ]; then
1903                 make_in_dir "${NETBSDSRCDIR}/etc/mtree" obj
1904                 make_in_dir "${NETBSDSRCDIR}/sys/rump" obj
1905         fi
1906         ${runcmd} "${makewrapper}" ${parallel} do-distrib-dirs \
1907             || bomb 'could not create distrib-dirs'
1908
1909         [ "${MKUPDATE}" = "no" ] && doclean="cleandir"
1910         targlist="${doclean} ${doobjs} dependall install"
1911         # optimize: for test we build only static libs (3x test speedup)
1912         if [ "${1}" = "rumptest" ] ; then
1913                 setmakeenv NOPIC 1
1914                 setmakeenv NOPROFILE 1
1915         fi
1916         for cmd in ${targlist} ; do
1917                 make_in_dir "${NETBSDSRCDIR}/sys/rump" ${cmd}
1918         done
1919
1920         # if we just wanted to build & install rump, we're done
1921         [ "${1}" != "rumptest" ] && return
1922
1923         ${runcmd} cd "${NETBSDSRCDIR}/sys/rump/librump/rumpkern" \
1924             || bomb "cd to rumpkern failed"
1925         md_quirks=`${runcmd} "${makewrapper}" -V '${_SYMQUIRK}'`
1926         # one little, two little, three little backslashes ...
1927         md_quirks="$(echo ${md_quirks} | sed 's,\\,\\\\,g'";s/'//g" )"
1928         ${runcmd} cd "${TOP}" || bomb "cd to ${TOP} failed"
1929         tool_ld=`${runcmd} "${makewrapper}" -V '${LD}'`
1930
1931         local oIFS="${IFS}"
1932         IFS=","
1933         for set in ${RUMP_LIBSETS} ; do
1934                 IFS="${oIFS}"
1935                 ${runcmd} ${tool_ld} -nostdlib -L${DESTDIR}/usr/lib     \
1936                     -static --whole-archive ${set} 2>&1 -o /tmp/rumptest.$$ | \
1937                       awk -v quirks="${md_quirks}" '
1938                         /undefined reference/ &&
1939                             !/more undefined references.*follow/{
1940                                 if (match($NF,
1941                                     "`(rumpuser_|__" quirks ")") == 0)
1942                                         fails[NR] = $0
1943                         }
1944                         /cannot find -l/{fails[NR] = $0}
1945                         /cannot open output file/{fails[NR] = $0}
1946                         END{
1947                                 for (x in fails)
1948                                         print fails[x]
1949                                 exit x!=0
1950                         }'
1951                 [ $? -ne 0 ] && bomb "Testlink of rump failed: ${set}"
1952         done
1953         statusmsg "Rump build&link tests successful"
1954 }
1955
1956 main()
1957 {
1958         initdefaults
1959         _args=$@
1960         parseoptions "$@"
1961
1962         sanitycheck
1963
1964         build_start=$(date)
1965         statusmsg2 "${progname} command:" "$0 $*"
1966         statusmsg2 "${progname} started:" "${build_start}"
1967         statusmsg2 "MINIX version:"    "${DISTRIBVER}"
1968         statusmsg2 "MACHINE:"          "${MACHINE}"
1969         statusmsg2 "MACHINE_ARCH:"     "${MACHINE_ARCH}"
1970         statusmsg2 "Build platform:"   "${uname_s} ${uname_r} ${uname_m}"
1971         statusmsg2 "HOST_SH:"          "${HOST_SH}"
1972
1973         rebuildmake
1974         validatemakeparams
1975         createmakewrapper
1976
1977         # Perform the operations.
1978         #
1979         for op in ${operations}; do
1980                 case "${op}" in
1981
1982                 makewrapper)
1983                         # no-op
1984                         ;;
1985
1986                 tools)
1987                         buildtools
1988                         ;;
1989
1990                 sets)
1991                         statusmsg "Building sets from pre-populated ${DESTDIR}"
1992                         ${runcmd} "${makewrapper}" ${parallel} ${op} ||
1993                             bomb "Failed to make ${op}"
1994                         setdir=${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets
1995                         statusmsg "Built sets to ${setdir}"
1996                         ;;
1997
1998                 cleandir|obj|build|distribution|release|sourcesets|syspkgs|params)
1999                         ${runcmd} "${makewrapper}" ${parallel} ${op} ||
2000                             bomb "Failed to make ${op}"
2001                         statusmsg "Successful make ${op}"
2002                         ;;
2003
2004                 iso-image|iso-image-source)
2005                         ${runcmd} "${makewrapper}" ${parallel} \
2006                             CDEXTRA="$CDEXTRA" ${op} ||
2007                             bomb "Failed to make ${op}"
2008                         statusmsg "Successful make ${op}"
2009                         ;;
2010
2011                 live-image|install-image)
2012                         # install-image and live-image require mtree spec files
2013                         # built with UNPRIVED.  Assume UNPRIVED build has been
2014                         # performed if METALOG file is created in DESTDIR.
2015                         if [ ! -e "${DESTDIR}/METALOG" ] ; then
2016                                 bomb "The release binaries must have been built with -U to create images."
2017                         fi
2018                         ${runcmd} "${makewrapper}" ${parallel} ${op} ||
2019                             bomb "Failed to make ${op}"
2020                         statusmsg "Successful make ${op}"
2021                         ;;
2022                 kernel=*)
2023                         arg=${op#*=}
2024                         buildkernel "${arg}"
2025                         ;;
2026
2027                 releasekernel=*)
2028                         arg=${op#*=}
2029                         releasekernel "${arg}"
2030                         ;;
2031
2032                 modules)
2033                         buildmodules
2034                         ;;
2035
2036                 installmodules=*)
2037                         arg=${op#*=}
2038                         if [ "${arg}" = "/" ] && \
2039                             (   [ "${uname_s}" != "Minix" ] || \
2040                                 [ "${uname_m}" != "${MACHINE}" ] ); then
2041                                 bomb "'${op}' must != / for cross builds."
2042                         fi
2043                         installmodules "${arg}"
2044                         ;;
2045
2046                 install=*)
2047                         arg=${op#*=}
2048                         if [ "${arg}" = "/" ] && \
2049                             (   [ "${uname_s}" != "Minix" ] || \
2050                                 [ "${uname_m}" != "${MACHINE}" ] ); then
2051                                 bomb "'${op}' must != / for cross builds."
2052                         fi
2053                         installworld "${arg}"
2054                         ;;
2055
2056                 rump|rumptest)
2057                         dorump "${op}"
2058                         ;;
2059
2060                 *)
2061                         bomb "Unknown operation \`${op}'"
2062                         ;;
2063
2064                 esac
2065         done
2066
2067         statusmsg2 "${progname} ended:" "$(date)"
2068         if [ -s "${results}" ]; then
2069                 echo "===> Summary of results:"
2070                 sed -e 's/^===>//;s/^/  /' "${results}"
2071                 echo "===> ."
2072         fi
2073 }
2074
2075 main "$@"