external/bsd/flex/dist/examples/Makefile

   1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
   2 # examples/Makefile.  Generated from Makefile.in by configure.
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
   6 # Foundation, Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16
  17
  18 # This file is part of flex.
  19
  20 # Redistribution and use in source and binary forms, with or without
  21 # modification, are permitted provided that the following conditions
  22 # are met:
  23
  24 # 1. Redistributions of source code must retain the above copyright
  25 #    notice, this list of conditions and the following disclaimer.
  26 # 2. Redistributions in binary form must reproduce the above copyright
  27 #    notice, this list of conditions and the following disclaimer in the
  28 #    documentation and/or other materials provided with the distribution.
  29
  30 # Neither the name of the University nor the names of its contributors
  31 # may be used to endorse or promote products derived from this software
  32 # without specific prior written permission.
  33
  34 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
  35 # IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
  36 # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  37 # PURPOSE.
  38
  39 am__make_dryrun = \
  40   { \
  41     am__dry=no; \
  42     case $$MAKEFLAGS in \
  43       *\\[\ \   ]*) \
  44         echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
  45           | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
  46       *) \
  47         for am__flg in $$MAKEFLAGS; do \
  48           case $$am__flg in \
  49             *=*|--*) ;; \
  50             *n*) am__dry=yes; break;; \
  51           esac; \
  52         done;; \
  53     esac; \
  54     test $$am__dry = yes; \
  55   }
  56 pkgdatadir = $(datadir)/flex
  57 pkgincludedir = $(includedir)/flex
  58 pkglibdir = $(libdir)/flex
  59 pkglibexecdir = $(libexecdir)/flex
  60 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  61 install_sh_DATA = $(install_sh) -c -m 644
  62 install_sh_PROGRAM = $(install_sh) -c
  63 install_sh_SCRIPT = $(install_sh) -c
  64 INSTALL_HEADER = $(INSTALL_DATA)
  65 transform = $(program_transform_name)
  66 NORMAL_INSTALL = :
  67 PRE_INSTALL = :
  68 POST_INSTALL = :
  69 NORMAL_UNINSTALL = :
  70 PRE_UNINSTALL = :
  71 POST_UNINSTALL = :
  72 build_triplet = x86_64-unknown-netbsd7.99.1
  73 host_triplet = x86_64-unknown-netbsd7.99.1
  74 subdir = examples
  75 DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  76 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  77 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
  78         $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
  79         $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
  80         $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
  81         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  82         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  83         $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
  84         $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
  85 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  86         $(ACLOCAL_M4)
  87 mkinstalldirs = $(install_sh) -d
  88 CONFIG_HEADER = $(top_builddir)/config.h
  89 CONFIG_CLEAN_FILES =
  90 CONFIG_CLEAN_VPATH_FILES =
  91 SOURCES =
  92 DIST_SOURCES =
  93 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  94         html-recursive info-recursive install-data-recursive \
  95         install-dvi-recursive install-exec-recursive \
  96         install-html-recursive install-info-recursive \
  97         install-pdf-recursive install-ps-recursive install-recursive \
  98         installcheck-recursive installdirs-recursive pdf-recursive \
  99         ps-recursive uninstall-recursive
 100 am__can_run_installinfo = \
 101   case $$AM_UPDATE_INFO_DIR in \
 102     n|no|NO) false;; \
 103     *) (install-info --version) >/dev/null 2>&1;; \
 104   esac
 105 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 106   distclean-recursive maintainer-clean-recursive
 107 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 108         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 109         distdir
 110 ETAGS = etags
 111 CTAGS = ctags
 112 DIST_SUBDIRS = $(SUBDIRS)
 113 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 114 am__relativize = \
 115   dir0=`pwd`; \
 116   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 117   sed_rest='s,^[^/]*/*,,'; \
 118   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 119   sed_butlast='s,/*[^/]*$$,,'; \
 120   while test -n "$$dir1"; do \
 121     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 122     if test "$$first" != "."; then \
 123       if test "$$first" = ".."; then \
 124         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 125         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 126       else \
 127         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 128         if test "$$first2" = "$$first"; then \
 129           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 130         else \
 131           dir2="../$$dir2"; \
 132         fi; \
 133         dir0="$$dir0"/"$$first"; \
 134       fi; \
 135     fi; \
 136     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 137   done; \
 138   reldir="$$dir2"
 139 ACLOCAL = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run aclocal-1.11
 140 ALLOCA =
 141 AMTAR = $${TAR-tar}
 142 AR = ar
 143 AUTOCONF = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run autoconf
 144 AUTOHEADER = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run autoheader
 145 AUTOMAKE = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run automake-1.11
 146 AWK = gawk
 147 BISON = /usr/pkg/bin/bison
 148 CC = gcc
 149 CCDEPMODE = depmode=gcc3
 150 CFLAGS = -g -O2
 151 CPP = gcc -E
 152 CPPFLAGS =
 153 CXX = g++
 154 CXXCPP = g++ -E
 155 CXXDEPMODE = depmode=gcc3
 156 CXXFLAGS = -g -O2
 157 CYGPATH_W = echo
 158 DEFS = -DHAVE_CONFIG_H
 159 DEPDIR = .deps
 160 DLLTOOL = false
 161 DSYMUTIL =
 162 DUMPBIN =
 163 ECHO_C =
 164 ECHO_N = -n
 165 ECHO_T =
 166 EGREP = /usr/bin/grep -E
 167 EXEEXT =
 168 FGREP = /usr/bin/grep -F
 169 GETTEXT_MACRO_VERSION = 0.18
 170 GMSGFMT = /usr/pkg/bin/msgfmt
 171 GMSGFMT_015 = /usr/pkg/bin/msgfmt
 172 GREP = /usr/bin/grep
 173 HELP2MAN = /usr/pkg/bin/help2man
 174 INDENT = /usr/bin/indent
 175 INSTALL = /usr/bin/install -c
 176 INSTALL_DATA = ${INSTALL} -m 644
 177 INSTALL_PROGRAM = ${INSTALL}
 178 INSTALL_SCRIPT = ${INSTALL}
 179 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
 180 INTLLIBS =
 181 INTL_MACOSX_LIBS =
 182 LD = /usr/bin/ld
 183 LDFLAGS =
 184 LEX = flex
 185 LEXLIB = -lfl
 186 LEX_OUTPUT_ROOT = lex.yy
 187 LIBICONV =
 188 LIBINTL =
 189 LIBOBJS =
 190 LIBS = -lm
 191 LIBTOOL = $(SHELL) $(top_builddir)/libtool
 192 LIPO =
 193 LN_S = ln -s
 194 LTLIBICONV =
 195 LTLIBINTL =
 196 LTLIBOBJS =
 197 M4 = /usr/pkg/bin/gm4
 198 MAKEINFO = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/missing --run makeinfo
 199 MANIFEST_TOOL = :
 200 MKDIR_P = .././install-sh -c -d
 201 MSGFMT = /usr/pkg/bin/msgfmt
 202 MSGFMT_015 = /usr/pkg/bin/msgfmt
 203 MSGMERGE = /usr/pkg/bin/msgmerge
 204 NM = /usr/bin/nm -B
 205 NMEDIT =
 206 OBJDUMP = objdump
 207 OBJEXT = o
 208 OTOOL =
 209 OTOOL64 =
 210 PACKAGE = flex
 211 PACKAGE_BUGREPORT = flex-help@lists.sourceforge.net
 212 PACKAGE_NAME = the fast lexical analyser generator
 213 PACKAGE_STRING = the fast lexical analyser generator 2.5.39
 214 PACKAGE_TARNAME = flex
 215 PACKAGE_URL =
 216 PACKAGE_VERSION = 2.5.39
 217 PATH_SEPARATOR = :
 218 POSUB =
 219 RANLIB = ranlib
 220 SED = /usr/pkg/bin/gsed
 221 SET_MAKE =
 222 SHARED_VERSION_INFO = 2:0:0
 223 SHELL = /bin/sh
 224 STRIP = strip
 225 USE_NLS = no
 226 VERSION = 2.5.39
 227 XGETTEXT = /usr/pkg/bin/xgettext
 228 XGETTEXT_015 = /usr/pkg/bin/xgettext
 229 XGETTEXT_EXTRA_OPTIONS =
 230 YACC = bison -y
 231 YFLAGS =
 232 abs_builddir = /usr/src/external/bsd/flex/flex-2.5.39/examples
 233 abs_srcdir = /usr/src/external/bsd/flex/flex-2.5.39/examples
 234 abs_top_builddir = /usr/src/external/bsd/flex/flex-2.5.39
 235 abs_top_srcdir = /usr/src/external/bsd/flex/flex-2.5.39
 236 ac_ct_AR = ar
 237 ac_ct_CC = gcc
 238 ac_ct_CXX = g++
 239 ac_ct_DUMPBIN =
 240 am__include = include
 241 am__leading_dot = .
 242 am__quote =
 243 am__tar = $${TAR-tar} chof - "$$tardir"
 244 am__untar = $${TAR-tar} xf -
 245 bindir = ${exec_prefix}/bin
 246 build = x86_64-unknown-netbsd7.99.1
 247 build_alias =
 248 build_cpu = x86_64
 249 build_os = netbsd7.99.1
 250 build_vendor = unknown
 251 builddir = .
 252 datadir = ${datarootdir}
 253 datarootdir = ${prefix}/share
 254 docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
 255 dvidir = ${docdir}
 256 exec_prefix = ${prefix}
 257 host = x86_64-unknown-netbsd7.99.1
 258 host_alias =
 259 host_cpu = x86_64
 260 host_os = netbsd7.99.1
 261 host_vendor = unknown
 262 htmldir = ${docdir}
 263 includedir = ${prefix}/include
 264 infodir = ${datarootdir}/info
 265 install_sh = ${SHELL} /usr/src/external/bsd/flex/flex-2.5.39/install-sh
 266 libdir = ${exec_prefix}/lib
 267 libexecdir = ${exec_prefix}/libexec
 268 localedir = ${datarootdir}/locale
 269 localstatedir = ${prefix}/var
 270 mandir = ${datarootdir}/man
 271 mkdir_p = $(top_builddir)/./install-sh -c -d
 272 oldincludedir = /usr/include
 273 pdfdir = ${docdir}
 274 prefix = /usr/local
 275 program_transform_name = s,x,x,
 276 psdir = ${docdir}
 277 sbindir = ${exec_prefix}/sbin
 278 sharedstatedir = ${prefix}/com
 279 srcdir = .
 280 sysconfdir = ${prefix}/etc
 281 target_alias =
 282 top_build_prefix = ../
 283 top_builddir = ..
 284 top_srcdir = ..
 285 EXTRA_DIST = \
 286         testxxLexer.l \
 287         debflex.awk \
 288         README
 289
 290 SUBDIRS = \
 291         manual \
 292         fastwc
 293
 294 all: all-recursive
 295
 296 .SUFFIXES:
 297 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 298         @for dep in $?; do \
 299           case '$(am__configure_deps)' in \
 300             *$$dep*) \
 301               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 302                 && { if test -f $@; then exit 0; else break; fi; }; \
 303               exit 1;; \
 304           esac; \
 305         done; \
 306         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/Makefile'; \
 307         $(am__cd) $(top_srcdir) && \
 308           $(AUTOMAKE) --gnu examples/Makefile
 309 .PRECIOUS: Makefile
 310 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 311         @case '$?' in \
 312           *config.status*) \
 313             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 314           *) \
 315             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 316             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 317         esac;
 318
 319 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 320         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 321
 322 $(top_srcdir)/configure:  $(am__configure_deps)
 323         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 324 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 325         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 326 $(am__aclocal_m4_deps):
 327
 328 mostlyclean-libtool:
 329         -rm -f *.lo
 330
 331 clean-libtool:
 332         -rm -rf .libs _libs
 333
 334 # This directory's subdirectories are mostly independent; you can cd
 335 # into them and run `make' without going through this Makefile.
 336 # To change the values of `make' variables: instead of editing Makefiles,
 337 # (1) if the variable is set in `config.status', edit `config.status'
 338 #     (which will cause the Makefiles to be regenerated when you run `make');
 339 # (2) otherwise, pass the desired values on the `make' command line.
 340 $(RECURSIVE_TARGETS):
 341         @fail= failcom='exit 1'; \
 342         for f in x $$MAKEFLAGS; do \
 343           case $$f in \
 344             *=* | --[!k]*);; \
 345             *k*) failcom='fail=yes';; \
 346           esac; \
 347         done; \
 348         dot_seen=no; \
 349         target=`echo $@ | sed s/-recursive//`; \
 350         list='$(SUBDIRS)'; for subdir in $$list; do \
 351           echo "Making $$target in $$subdir"; \
 352           if test "$$subdir" = "."; then \
 353             dot_seen=yes; \
 354             local_target="$$target-am"; \
 355           else \
 356             local_target="$$target"; \
 357           fi; \
 358           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 359           || eval $$failcom; \
 360         done; \
 361         if test "$$dot_seen" = "no"; then \
 362           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 363         fi; test -z "$$fail"
 364
 365 $(RECURSIVE_CLEAN_TARGETS):
 366         @fail= failcom='exit 1'; \
 367         for f in x $$MAKEFLAGS; do \
 368           case $$f in \
 369             *=* | --[!k]*);; \
 370             *k*) failcom='fail=yes';; \
 371           esac; \
 372         done; \
 373         dot_seen=no; \
 374         case "$@" in \
 375           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 376           *) list='$(SUBDIRS)' ;; \
 377         esac; \
 378         rev=''; for subdir in $$list; do \
 379           if test "$$subdir" = "."; then :; else \
 380             rev="$$subdir $$rev"; \
 381           fi; \
 382         done; \
 383         rev="$$rev ."; \
 384         target=`echo $@ | sed s/-recursive//`; \
 385         for subdir in $$rev; do \
 386           echo "Making $$target in $$subdir"; \
 387           if test "$$subdir" = "."; then \
 388             local_target="$$target-am"; \
 389           else \
 390             local_target="$$target"; \
 391           fi; \
 392           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 393           || eval $$failcom; \
 394         done && test -z "$$fail"
 395 tags-recursive:
 396         list='$(SUBDIRS)'; for subdir in $$list; do \
 397           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 398         done
 399 ctags-recursive:
 400         list='$(SUBDIRS)'; for subdir in $$list; do \
 401           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 402         done
 403
 404 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 405         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 406         unique=`for i in $$list; do \
 407             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 408           done | \
 409           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 410               END { if (nonempty) { for (i in files) print i; }; }'`; \
 411         mkid -fID $$unique
 412 tags: TAGS
 413
 414 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 415                 $(TAGS_FILES) $(LISP)
 416         set x; \
 417         here=`pwd`; \
 418         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 419           include_option=--etags-include; \
 420           empty_fix=.; \
 421         else \
 422           include_option=--include; \
 423           empty_fix=; \
 424         fi; \
 425         list='$(SUBDIRS)'; for subdir in $$list; do \
 426           if test "$$subdir" = .; then :; else \
 427             test ! -f $$subdir/TAGS || \
 428               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 429           fi; \
 430         done; \
 431         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 432         unique=`for i in $$list; do \
 433             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 434           done | \
 435           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 436               END { if (nonempty) { for (i in files) print i; }; }'`; \
 437         shift; \
 438         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 439           test -n "$$unique" || unique=$$empty_fix; \
 440           if test $$# -gt 0; then \
 441             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 442               "$$@" $$unique; \
 443           else \
 444             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 445               $$unique; \
 446           fi; \
 447         fi
 448 ctags: CTAGS
 449 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 450                 $(TAGS_FILES) $(LISP)
 451         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 452         unique=`for i in $$list; do \
 453             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 454           done | \
 455           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 456               END { if (nonempty) { for (i in files) print i; }; }'`; \
 457         test -z "$(CTAGS_ARGS)$$unique" \
 458           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 459              $$unique
 460
 461 GTAGS:
 462         here=`$(am__cd) $(top_builddir) && pwd` \
 463           && $(am__cd) $(top_srcdir) \
 464           && gtags -i $(GTAGS_ARGS) "$$here"
 465
 466 distclean-tags:
 467         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 468
 469 distdir: $(DISTFILES)
 470         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 471         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 472         list='$(DISTFILES)'; \
 473           dist_files=`for file in $$list; do echo $$file; done | \
 474           sed -e "s|^$$srcdirstrip/||;t" \
 475               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 476         case $$dist_files in \
 477           */*) $(MKDIR_P) `echo "$$dist_files" | \
 478                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 479                            sort -u` ;; \
 480         esac; \
 481         for file in $$dist_files; do \
 482           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 483           if test -d $$d/$$file; then \
 484             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 485             if test -d "$(distdir)/$$file"; then \
 486               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 487             fi; \
 488             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 489               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 490               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 491             fi; \
 492             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 493           else \
 494             test -f "$(distdir)/$$file" \
 495             || cp -p $$d/$$file "$(distdir)/$$file" \
 496             || exit 1; \
 497           fi; \
 498         done
 499         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 500           if test "$$subdir" = .; then :; else \
 501             $(am__make_dryrun) \
 502               || test -d "$(distdir)/$$subdir" \
 503               || $(MKDIR_P) "$(distdir)/$$subdir" \
 504               || exit 1; \
 505             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 506             $(am__relativize); \
 507             new_distdir=$$reldir; \
 508             dir1=$$subdir; dir2="$(top_distdir)"; \
 509             $(am__relativize); \
 510             new_top_distdir=$$reldir; \
 511             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 512             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 513             ($(am__cd) $$subdir && \
 514               $(MAKE) $(AM_MAKEFLAGS) \
 515                 top_distdir="$$new_top_distdir" \
 516                 distdir="$$new_distdir" \
 517                 am__remove_distdir=: \
 518                 am__skip_length_check=: \
 519                 am__skip_mode_fix=: \
 520                 distdir) \
 521               || exit 1; \
 522           fi; \
 523         done
 524 check-am: all-am
 525 check: check-recursive
 526 all-am: Makefile
 527 installdirs: installdirs-recursive
 528 installdirs-am:
 529 install: install-recursive
 530 install-exec: install-exec-recursive
 531 install-data: install-data-recursive
 532 uninstall: uninstall-recursive
 533
 534 install-am: all-am
 535         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 536
 537 installcheck: installcheck-recursive
 538 install-strip:
 539         if test -z '$(STRIP)'; then \
 540           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 541             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 542               install; \
 543         else \
 544           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 545             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 546             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 547         fi
 548 mostlyclean-generic:
 549
 550 clean-generic:
 551
 552 distclean-generic:
 553         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 554         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 555
 556 maintainer-clean-generic:
 557         @echo "This command is intended for maintainers to use"
 558         @echo "it deletes files that may require special tools to rebuild."
 559 clean: clean-recursive
 560
 561 clean-am: clean-generic clean-libtool mostlyclean-am
 562
 563 distclean: distclean-recursive
 564         -rm -f Makefile
 565 distclean-am: clean-am distclean-generic distclean-tags
 566
 567 dvi: dvi-recursive
 568
 569 dvi-am:
 570
 571 html: html-recursive
 572
 573 html-am:
 574
 575 info: info-recursive
 576
 577 info-am:
 578
 579 install-data-am:
 580
 581 install-dvi: install-dvi-recursive
 582
 583 install-dvi-am:
 584
 585 install-exec-am:
 586
 587 install-html: install-html-recursive
 588
 589 install-html-am:
 590
 591 install-info: install-info-recursive
 592
 593 install-info-am:
 594
 595 install-man:
 596
 597 install-pdf: install-pdf-recursive
 598
 599 install-pdf-am:
 600
 601 install-ps: install-ps-recursive
 602
 603 install-ps-am:
 604
 605 installcheck-am:
 606
 607 maintainer-clean: maintainer-clean-recursive
 608         -rm -f Makefile
 609 maintainer-clean-am: distclean-am maintainer-clean-generic
 610
 611 mostlyclean: mostlyclean-recursive
 612
 613 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 614
 615 pdf: pdf-recursive
 616
 617 pdf-am:
 618
 619 ps: ps-recursive
 620
 621 ps-am:
 622
 623 uninstall-am:
 624
 625 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 626         install-am install-strip tags-recursive
 627
 628 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 629         all all-am check check-am clean clean-generic clean-libtool \
 630         ctags ctags-recursive distclean distclean-generic \
 631         distclean-libtool distclean-tags distdir dvi dvi-am html \
 632         html-am info info-am install install-am install-data \
 633         install-data-am install-dvi install-dvi-am install-exec \
 634         install-exec-am install-html install-html-am install-info \
 635         install-info-am install-man install-pdf install-pdf-am \
 636         install-ps install-ps-am install-strip installcheck \
 637         installcheck-am installdirs installdirs-am maintainer-clean \
 638         maintainer-clean-generic mostlyclean mostlyclean-generic \
 639         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 640         uninstall uninstall-am
 641
 642
 643 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 644 # Otherwise a system limit (for SysV at least) may be exceeded.
 645 .NOEXPORT: