test/test50.c

   1 /* Tests for truncate(2) call family - by D.C. van Moolenbroek */
   2 #include <sys/stat.h>
   3 #include <sys/param.h>
   4 #include <unistd.h>
   5 #include <fcntl.h>
   6 #include <assert.h>
   7
   8 #define ITERATIONS 1
   9 int max_error = 4;
  10 #include "common.h"
  11
  12
  13 #define TESTFILE "testfile"
  14 #define TESTSIZE 4096
  15 #define THRESHOLD 1048576
  16
  17
  18 int main(int argc, char *argv[]);
  19 void prepare(void);
  20 int make_file(off_t size);
  21 void check_file(int fd, off_t size, off_t hole_start, off_t hole_end);
  22 void all_sizes(void (*call) (off_t osize, off_t nsize));
  23 void test50a(void);
  24 void test50b(void);
  25 void test50c(void);
  26 void test50d(void);
  27 void sub50e(off_t osize, off_t nsize);
  28 void test50e(void);
  29 void sub50f(off_t osize, off_t nsize);
  30 void test50f(void);
  31 void sub50g(off_t osize, off_t nsize);
  32 void test50g(void);
  33 void sub50h(off_t osize, off_t nsize);
  34 void test50h(void);
  35 void sub50i(off_t size, off_t off, size_t len, int type);
  36 void test50i(void);
  37
  38 /* Some of the sizes have been chosen in such a way that they should be on the
  39  * edge of direct/single indirect/double indirect switchovers for a MINIX
  40  * file system with 4K block size.
  41  */
  42 static off_t sizes[] = {
  43   0L, 1L, 511L, 512L, 513L, 1023L, 1024L, 1025L, 2047L, 2048L, 2049L, 3071L,
  44   3072L, 3073L, 4095L, 4096L, 4097L, 16383L, 16384L, 16385L, 28671L, 28672L,
  45   28673L, 65535L, 65536L, 65537L, 4222975L, 4222976L, 4222977L
  46 };
  47
  48 static unsigned char *data;
  49
  50 int main(argc, argv)
  51 int argc;
  52 char *argv[];
  53 {
  54   int j, m = 0xFFFF;
  55
  56   start(50);
  57   prepare();
  58   if (argc == 2) m = atoi(argv[1]);
  59   for (j = 0; j < ITERATIONS; j++) {
  60         if (m & 00001) test50a();
  61         if (m & 00002) test50b();
  62         if (m & 00004) test50c();
  63         if (m & 00010) test50d();
  64         if (m & 00020) test50e();
  65         if (m & 00040) test50f();
  66         if (m & 00100) test50g();
  67         if (m & 00200) test50h();
  68         if (m & 00400) test50i();
  69   }
  70
  71   quit();
  72   return(-1);                   /* impossible */
  73 }
  74
  75 void prepare()
  76 {
  77   size_t largest;
  78   int i;
  79
  80   largest = 0;
  81   for (i = 0; i < sizeof(sizes) / sizeof(sizes[0]); i++)
  82         if (largest < sizes[i]) largest = sizes[i];
  83
  84   /* internal integrity check: this is needed for early tests */
  85   assert(largest >= TESTSIZE);
  86
  87   data = malloc(largest);
  88   if (data == NULL) e(1000);
  89
  90   srand(1);
  91
  92   for (i = 0; i < largest; i++)
  93         data[i] = (unsigned char) (rand() % 255 + 1);
  94 }
  95
  96 void all_sizes(call)
  97 void(*call) (off_t osize, off_t nsize);
  98 {
  99   int i, j;
 100
 101   for (i = 0; i < sizeof(sizes) / sizeof(sizes[0]); i++)
 102         for (j = 0; j < sizeof(sizes) / sizeof(sizes[0]); j++)
 103                 call(sizes[i], sizes[j]);
 104 }
 105
 106 int make_file(size)
 107 off_t size;
 108 {
 109   off_t off;
 110   int fd, r;
 111
 112   if ((fd = open(TESTFILE, O_RDWR|O_CREAT|O_EXCL, 0600)) < 0) e(1001);
 113
 114   off = 0;
 115   while (off < size) {
 116         r = write(fd, data + off, size - off);
 117
 118         if (r != size - off) e(1002);
 119
 120         off += r;
 121   }
 122
 123   return fd;
 124 }
 125
 126 void check_file(fd, hole_start, hole_end, size)
 127 int fd;
 128 off_t hole_start;
 129 off_t hole_end;
 130 off_t size;
 131 {
 132   static unsigned char buf[16384];
 133   struct stat statbuf;
 134   off_t off;
 135   int i, chunk;
 136
 137   /* The size must match. */
 138   if (fstat(fd, &statbuf) != 0) e(1003);
 139   if (statbuf.st_size != size) e(1004);
 140
 141   if (lseek(fd, 0L, SEEK_SET) != 0L) e(1005);
 142
 143   /* All bytes in the file must be equal to what we wrote, except for the bytes
 144    * in the hole, which must be zero.
 145    */
 146   for (off = 0; off < size; off += chunk) {
 147         chunk = MIN(sizeof(buf), size - off);
 148
 149         if (read(fd, buf, chunk) != chunk) e(1006);
 150
 151         for (i = 0; i < chunk; i++) {
 152                 if (off + i >= hole_start && off + i < hole_end) {
 153                         if (buf[i] != 0) e(1007);
 154                 }
 155                 else {
 156                         if (buf[i] != data[off+i]) e(1008);
 157                 }
 158         }
 159   }
 160
 161   /* We must get back EOF at the end. */
 162   if (read(fd, buf, sizeof(buf)) != 0) e(1009);
 163 }
 164
 165 void test50a()
 166 {
 167   struct stat statbuf;
 168   int fd;
 169
 170   subtest = 1;
 171
 172   if ((fd = open(TESTFILE, O_WRONLY|O_CREAT|O_EXCL, 0600)) < 0) e(1);
 173
 174   if (write(fd, data, TESTSIZE) != TESTSIZE) e(2);
 175
 176   /* Negative sizes should result in EINVAL. */
 177   if (truncate(TESTFILE, -1) != -1) e(3);
 178   if (errno != EINVAL) e(4);
 179
 180   /* Make sure the file size did not change. */
 181   if (fstat(fd, &statbuf) != 0) e(5);
 182   if (statbuf.st_size != TESTSIZE) e(6);
 183
 184   close(fd);
 185   if (unlink(TESTFILE) != 0) e(7);
 186
 187   /* An empty path should result in ENOENT. */
 188   if (truncate("", 0) != -1) e(8);
 189   if (errno != ENOENT) e(9);
 190
 191   /* A non-existing file name should result in ENOENT. */
 192   if (truncate(TESTFILE"2", 0) != -1) e(10);
 193   if (errno != ENOENT) e(11);
 194 }
 195
 196 void test50b()
 197 {
 198   struct stat statbuf;
 199   int fd;
 200
 201   subtest = 2;
 202
 203   if ((fd = open(TESTFILE, O_WRONLY|O_CREAT|O_EXCL, 0600)) < 0) e(1);
 204
 205   if (write(fd, data, TESTSIZE) != TESTSIZE) e(2);
 206
 207   /* Negative sizes should result in EINVAL. */
 208   if (ftruncate(fd, -1) != -1) e(3);
 209   if (errno != EINVAL) e(4);
 210
 211   /* Make sure the file size did not change. */
 212   if (fstat(fd, &statbuf) != 0) e(5);
 213   if (statbuf.st_size != TESTSIZE) e(6);
 214
 215   close(fd);
 216
 217   /* Calls on an invalid file descriptor should return EBADF or EINVAL. */
 218   if (ftruncate(fd, 0) != -1) e(7);
 219   if (errno != EBADF && errno != EINVAL) e(8);
 220
 221   if ((fd = open(TESTFILE, O_RDONLY)) < 0) e(9);
 222
 223   /* Calls on a file opened read-only should return EBADF or EINVAL. */
 224   if (ftruncate(fd, 0) != -1) e(10);
 225   if (errno != EBADF && errno != EINVAL) e(11);
 226
 227   close(fd);
 228
 229   if (unlink(TESTFILE) != 0) e(12);
 230 }
 231
 232 void test50c()
 233 {
 234   struct stat statbuf;
 235   struct flock flock;
 236   off_t off;
 237   int fd;
 238
 239   subtest = 3;
 240
 241   if ((fd = open(TESTFILE, O_WRONLY|O_CREAT|O_EXCL, 0600)) < 0) e(1);
 242
 243   if (write(fd, data, TESTSIZE) != TESTSIZE) e(2);
 244
 245   off = TESTSIZE / 2;
 246   if (lseek(fd, off, SEEK_SET) != off) e(3);
 247
 248   flock.l_len = 0;
 249
 250   /* Negative sizes should result in EINVAL. */
 251   flock.l_whence = SEEK_SET;
 252   flock.l_start = -1;
 253   if (fcntl(fd, F_FREESP, &flock) != -1) e(4);
 254   if (errno != EINVAL) e(5);
 255
 256   flock.l_whence = SEEK_CUR;
 257   flock.l_start = -off - 1;
 258   if (fcntl(fd, F_FREESP, &flock) != -1) e(6);
 259   if (errno != EINVAL) e(7);
 260
 261   flock.l_whence = SEEK_END;
 262   flock.l_start = -TESTSIZE - 1;
 263   if (fcntl(fd, F_FREESP, &flock) != -1) e(8);
 264   if (errno != EINVAL) e(9);
 265
 266   /* Make sure the file size did not change. */
 267   if (fstat(fd, &statbuf) != 0) e(10);
 268   if (statbuf.st_size != TESTSIZE) e(11);
 269
 270   /* Proper negative values should work, however. */
 271   flock.l_whence = SEEK_CUR;
 272   flock.l_start = -1;
 273   if (fcntl(fd, F_FREESP, &flock) != 0) e(12);
 274
 275   if (fstat(fd, &statbuf) != 0) e(13);
 276   if (statbuf.st_size != off - 1) e(14);
 277
 278   flock.l_whence = SEEK_END;
 279   flock.l_start = -off + 1;
 280   if (fcntl(fd, F_FREESP, &flock) != 0) e(15);
 281
 282   if (fstat(fd, &statbuf) != 0) e(16);
 283   if (statbuf.st_size != 0L) e(17);
 284
 285   close(fd);
 286
 287   /* Calls on an invalid file descriptor should return EBADF or EINVAL. */
 288   flock.l_whence = SEEK_SET;
 289   flock.l_start = 0;
 290   if (fcntl(fd, F_FREESP, &flock) != -1) e(18);
 291   if (errno != EBADF && errno != EINVAL) e(19);
 292
 293   if ((fd = open(TESTFILE, O_RDONLY)) < 0) e(20);
 294
 295   /* Calls on a file opened read-only should return EBADF or EINVAL. */
 296   if (fcntl(fd, F_FREESP, &flock) != -1) e(21);
 297   if (errno != EBADF && errno != EINVAL) e(22);
 298
 299   close(fd);
 300
 301   if (unlink(TESTFILE) != 0) e(23);
 302 }
 303
 304 void test50d()
 305 {
 306   struct stat statbuf;
 307   struct flock flock;
 308   off_t off;
 309   int fd;
 310
 311   subtest = 4;
 312
 313   if ((fd = open(TESTFILE, O_WRONLY|O_CREAT|O_EXCL, 0600)) < 0) e(1);
 314
 315   if (write(fd, data, TESTSIZE) != TESTSIZE) e(2);
 316
 317   off = TESTSIZE / 2;
 318   if (lseek(fd, off, SEEK_SET) != off) e(3);
 319
 320   /* The given length must be positive. */
 321   flock.l_whence = SEEK_CUR;
 322   flock.l_start = 0;
 323   flock.l_len = -1;
 324   if (fcntl(fd, F_FREESP, &flock) != -1) e(4);
 325   if (errno != EINVAL) e(5);
 326
 327   /* Negative start positions are not allowed. */
 328   flock.l_whence = SEEK_SET;
 329   flock.l_start = -1;
 330   flock.l_len = 1;
 331   if (fcntl(fd, F_FREESP, &flock) != -1) e(6);
 332   if (errno != EINVAL) e(7);
 333
 334   flock.l_whence = SEEK_CUR;
 335   flock.l_start = -off - 1;
 336   if (fcntl(fd, F_FREESP, &flock) != -1) e(8);
 337   if (errno != EINVAL) e(9);
 338
 339   flock.l_whence = SEEK_END;
 340   flock.l_start = -TESTSIZE - 1;
 341   if (fcntl(fd, F_FREESP, &flock) != -1) e(10);
 342   if (errno != EINVAL) e(11);
 343
 344   /* Start positions at or beyond the end of the file are no good, either. */
 345   flock.l_whence = SEEK_SET;
 346   flock.l_start = TESTSIZE;
 347   if (fcntl(fd, F_FREESP, &flock) != -1) e(12);
 348   if (errno != EINVAL) e(13);
 349
 350   flock.l_start = TESTSIZE + 1;
 351   if (fcntl(fd, F_FREESP, &flock) != -1) e(13);
 352   if (errno != EINVAL) e(14);
 353
 354   flock.l_whence = SEEK_CUR;
 355   flock.l_start = TESTSIZE - off;
 356   if (fcntl(fd, F_FREESP, &flock) != -1) e(15);
 357   if (errno != EINVAL) e(16);
 358
 359   flock.l_whence = SEEK_END;
 360   flock.l_start = 1;
 361   if (fcntl(fd, F_FREESP, &flock) != -1) e(17);
 362   if (errno != EINVAL) e(18);
 363
 364   /* End positions beyond the end of the file may be silently bounded. */
 365   flock.l_whence = SEEK_SET;
 366   flock.l_start = 0;
 367   flock.l_len = TESTSIZE + 1;
 368   if (fcntl(fd, F_FREESP, &flock) != 0) e(19);
 369
 370   flock.l_whence = SEEK_CUR;
 371   flock.l_len = TESTSIZE - off + 1;
 372   if (fcntl(fd, F_FREESP, &flock) != 0) e(20);
 373
 374   flock.l_whence = SEEK_END;
 375   flock.l_start = -1;
 376   flock.l_len = 2;
 377   if (fcntl(fd, F_FREESP, &flock) != 0) e(21);
 378
 379   /* However, this must never cause the file size to change. */
 380   if (fstat(fd, &statbuf) != 0) e(22);
 381   if (statbuf.st_size != TESTSIZE) e(23);
 382
 383   close(fd);
 384
 385   /* Calls on an invalid file descriptor should return EBADF or EINVAL. */
 386   flock.l_whence = SEEK_SET;
 387   flock.l_start = 0;
 388   if (fcntl(fd, F_FREESP, &flock) != -1) e(24);
 389   if (errno != EBADF && errno != EINVAL) e(25);
 390
 391   if ((fd = open(TESTFILE, O_RDONLY)) < 0) e(26);
 392
 393   /* Calls on a file opened read-only should return EBADF or EINVAL. */
 394   if (fcntl(fd, F_FREESP, &flock) != -1) e(27);
 395   if (errno != EBADF && errno != EINVAL) e(28);
 396
 397   close(fd);
 398
 399   if (unlink(TESTFILE) != 0) e(29);
 400 }
 401
 402 void sub50e(osize, nsize)
 403 off_t osize;
 404 off_t nsize;
 405 {
 406   int fd;
 407
 408   fd = make_file(osize);
 409
 410   if (truncate(TESTFILE, nsize) != 0) e(1);
 411
 412   check_file(fd, osize, nsize, nsize);
 413
 414   if (nsize < osize) {
 415         if (truncate(TESTFILE, osize) != 0) e(2);
 416
 417         check_file(fd, nsize, osize, osize);
 418   }
 419
 420   close(fd);
 421
 422   if (unlink(TESTFILE) != 0) e(3);
 423
 424 }
 425
 426 void test50e()
 427 {
 428   subtest = 5;
 429
 430   /* truncate(2) on a file that is open. */
 431   all_sizes(sub50e);
 432 }
 433
 434 void sub50f(osize, nsize)
 435 off_t osize;
 436 off_t nsize;
 437 {
 438   int fd;
 439
 440   fd = make_file(osize);
 441
 442   close(fd);
 443
 444   if (truncate(TESTFILE, nsize) != 0) e(1);
 445
 446   if ((fd = open(TESTFILE, O_RDONLY)) < 0) e(2);
 447
 448   check_file(fd, osize, nsize, nsize);
 449
 450   if (nsize < osize) {
 451         close(fd);
 452
 453         if (truncate(TESTFILE, osize) != 0) e(3);
 454
 455         if ((fd = open(TESTFILE, O_RDONLY)) < 0) e(4);
 456
 457         check_file(fd, nsize, osize, osize);
 458   }
 459
 460   close(fd);
 461
 462   if (unlink(TESTFILE) != 0) e(5);
 463 }
 464
 465 void test50f()
 466 {
 467   subtest = 6;
 468
 469   /* truncate(2) on a file that is not open. */
 470   all_sizes(sub50f);
 471 }
 472
 473 void sub50g(osize, nsize)
 474 off_t osize;
 475 off_t nsize;
 476 {
 477   int fd;
 478
 479   fd = make_file(osize);
 480
 481   if (ftruncate(fd, nsize) != 0) e(1);
 482
 483   check_file(fd, osize, nsize, nsize);
 484
 485   if (nsize < osize) {
 486         if (ftruncate(fd, osize) != 0) e(2);
 487
 488         check_file(fd, nsize, osize, osize);
 489   }
 490
 491   close(fd);
 492
 493   if (unlink(TESTFILE) != 0) e(3);
 494 }
 495
 496 void test50g()
 497 {
 498   subtest = 7;
 499
 500   /* ftruncate(2) on an open file. */
 501   all_sizes(sub50g);
 502 }
 503
 504 void sub50h(osize, nsize)
 505 off_t osize;
 506 off_t nsize;
 507 {
 508   struct flock flock;
 509   int fd;
 510
 511   fd = make_file(osize);
 512
 513   flock.l_whence = SEEK_SET;
 514   flock.l_start = nsize;
 515   flock.l_len = 0;
 516   if (fcntl(fd, F_FREESP, &flock) != 0) e(1);
 517
 518   check_file(fd, osize, nsize, nsize);
 519
 520   if (nsize < osize) {
 521         flock.l_whence = SEEK_SET;
 522         flock.l_start = osize;
 523         flock.l_len = 0;
 524         if (fcntl(fd, F_FREESP, &flock) != 0) e(2);
 525
 526         check_file(fd, nsize, osize, osize);
 527   }
 528
 529   close(fd);
 530
 531   if (unlink(TESTFILE) != 0) e(3);
 532 }
 533
 534 void test50h()
 535 {
 536   subtest = 8;
 537
 538   /* fcntl(2) with F_FREESP and l_len=0. */
 539   all_sizes(sub50h);
 540 }
 541
 542 void sub50i(size, off, len, type)
 543 off_t size;
 544 off_t off;
 545 size_t len;
 546 int type;
 547 {
 548   struct flock flock;
 549   int fd;
 550
 551   fd = make_file(size);
 552
 553   switch (type) {
 554   case 0:
 555         flock.l_whence = SEEK_SET;
 556         flock.l_start = off;
 557         break;
 558   case 1:
 559         if (lseek(fd, off, SEEK_SET) != off) e(1);
 560         flock.l_whence = SEEK_CUR;
 561         flock.l_start = 0;
 562         break;
 563   case 2:
 564         flock.l_whence = SEEK_END;
 565         flock.l_start = off - size;
 566         break;
 567   default:
 568         e(1);
 569   }
 570
 571   flock.l_len = len;
 572   if (fcntl(fd, F_FREESP, &flock) != 0) e(2);
 573
 574   check_file(fd, off, off + len, size);
 575
 576   /* Repeat the call in order to see whether the file system can handle holes
 577    * while freeing up. If not, the server would typically crash; we need not
 578    * check the results again.
 579    */
 580   flock.l_whence = SEEK_SET;
 581   flock.l_start = off;
 582   if (fcntl(fd, F_FREESP, &flock) != 0) e(3);
 583
 584   close(fd);
 585
 586   if (unlink(TESTFILE) != 0) e(4);
 587 }
 588
 589 void test50i()
 590 {
 591   off_t off;
 592   int i, j, k, l;
 593
 594   subtest = 9;
 595
 596   /* fcntl(2) with F_FREESP and l_len>0. */
 597
 598   /* This loop determines the size of the test file. */
 599   for (i = 0; i < sizeof(sizes) / sizeof(sizes[0]); i++) {
 600         /* Big files simply take too long. We have to compromise here. */
 601         if (sizes[i] >= THRESHOLD) continue;
 602
 603         /* This loop determines one of the two values for the offset. */
 604         for (j = 0; j < sizeof(sizes) / sizeof(sizes[0]); j++) {
 605                 if (sizes[j] >= sizes[i]) continue;
 606
 607                 /* This loop determines the other. */
 608                 for (k = 0; k < sizeof(sizes) / sizeof(sizes[0]); k++) {
 609                         if (sizes[k] > sizes[j]) continue;
 610
 611                         /* Construct an offset by adding the two sizes. */
 612                         off = sizes[j] + sizes[k];
 613
 614                         if (j + 1 < sizeof(sizes) / sizeof(sizes[0]) &&
 615                                 off >= sizes[j + 1]) continue;
 616
 617                         /* This loop determines the length of the hole. */
 618                         for (l = 0; l < sizeof(sizes) / sizeof(sizes[0]); l++) {
 619                                 if (sizes[l] == 0 || off + sizes[l] > sizes[i])
 620                                         continue;
 621
 622                                 /* This could have been a loop, too! */
 623                                 sub50i(sizes[i], off, sizes[l], 0);
 624                                 sub50i(sizes[i], off, sizes[l], 1);
 625                                 sub50i(sizes[i], off, sizes[l], 2);
 626                         }
 627                 }
 628         }
 629   }
 630 }