drivers/mtd/devices/doc2001.c

   1
   2 /*
   3  * Linux driver for Disk-On-Chip Millennium
   4  * (c) 1999 Machine Vision Holdings, Inc.
   5  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
   6  */
   7
   8 #include <linux/kernel.h>
   9 #include <linux/module.h>
  10 #include <asm/errno.h>
  11 #include <asm/io.h>
  12 #include <asm/uaccess.h>
  13 #include <linux/delay.h>
  14 #include <linux/slab.h>
  15 #include <linux/init.h>
  16 #include <linux/types.h>
  17 #include <linux/bitops.h>
  18
  19 #include <linux/mtd/mtd.h>
  20 #include <linux/mtd/nand.h>
  21 #include <linux/mtd/doc2000.h>
  22
  23 /* #define ECC_DEBUG */
  24
  25 /* I have no idea why some DoC chips can not use memcop_form|to_io().
  26  * This may be due to the different revisions of the ASIC controller built-in or
  27  * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
  28  * this:*/
  29 #undef USE_MEMCPY
  30
  31 static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
  32                     size_t *retlen, u_char *buf);
  33 static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
  34                      size_t *retlen, const u_char *buf);
  35 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
  36                         struct mtd_oob_ops *ops);
  37 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
  38                          struct mtd_oob_ops *ops);
  39 static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
  40
  41 static struct mtd_info *docmillist = NULL;
  42
  43 /* Perform the required delay cycles by reading from the NOP register */
  44 static void DoC_Delay(void __iomem * docptr, unsigned short cycles)
  45 {
  46         volatile char dummy;
  47         int i;
  48
  49         for (i = 0; i < cycles; i++)
  50                 dummy = ReadDOC(docptr, NOP);
  51 }
  52
  53 /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
  54 static int _DoC_WaitReady(void __iomem * docptr)
  55 {
  56         unsigned short c = 0xffff;
  57
  58         DEBUG(MTD_DEBUG_LEVEL3,
  59               "_DoC_WaitReady called for out-of-line wait\n");
  60
  61         /* Out-of-line routine to wait for chip response */
  62         while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
  63                 ;
  64
  65         if (c == 0)
  66                 DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
  67
  68         return (c == 0);
  69 }
  70
  71 static inline int DoC_WaitReady(void __iomem * docptr)
  72 {
  73         /* This is inline, to optimise the common case, where it's ready instantly */
  74         int ret = 0;
  75
  76         /* 4 read form NOP register should be issued in prior to the read from CDSNControl
  77            see Software Requirement 11.4 item 2. */
  78         DoC_Delay(docptr, 4);
  79
  80         if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
  81                 /* Call the out-of-line routine to wait */
  82                 ret = _DoC_WaitReady(docptr);
  83
  84         /* issue 2 read from NOP register after reading from CDSNControl register
  85            see Software Requirement 11.4 item 2. */
  86         DoC_Delay(docptr, 2);
  87
  88         return ret;
  89 }
  90
  91 /* DoC_Command: Send a flash command to the flash chip through the CDSN IO register
  92    with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
  93    required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
  94
  95 static void DoC_Command(void __iomem * docptr, unsigned char command,
  96                                unsigned char xtraflags)
  97 {
  98         /* Assert the CLE (Command Latch Enable) line to the flash chip */
  99         WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
 100         DoC_Delay(docptr, 4);
 101
 102         /* Send the command */
 103         WriteDOC(command, docptr, Mil_CDSN_IO);
 104         WriteDOC(0x00, docptr, WritePipeTerm);
 105
 106         /* Lower the CLE line */
 107         WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
 108         DoC_Delay(docptr, 4);
 109 }
 110
 111 /* DoC_Address: Set the current address for the flash chip through the CDSN IO register
 112    with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
 113    required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
 114
 115 static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs,
 116                                unsigned char xtraflags1, unsigned char xtraflags2)
 117 {
 118         /* Assert the ALE (Address Latch Enable) line to the flash chip */
 119         WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
 120         DoC_Delay(docptr, 4);
 121
 122         /* Send the address */
 123         switch (numbytes)
 124             {
 125             case 1:
 126                     /* Send single byte, bits 0-7. */
 127                     WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
 128                     WriteDOC(0x00, docptr, WritePipeTerm);
 129                     break;
 130             case 2:
 131                     /* Send bits 9-16 followed by 17-23 */
 132                     WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
 133                     WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
 134                     WriteDOC(0x00, docptr, WritePipeTerm);
 135                 break;
 136             case 3:
 137                     /* Send 0-7, 9-16, then 17-23 */
 138                     WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
 139                     WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
 140                     WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
 141                     WriteDOC(0x00, docptr, WritePipeTerm);
 142                 break;
 143             default:
 144                 return;
 145             }
 146
 147         /* Lower the ALE line */
 148         WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl);
 149         DoC_Delay(docptr, 4);
 150 }
 151
 152 /* DoC_SelectChip: Select a given flash chip within the current floor */
 153 static int DoC_SelectChip(void __iomem * docptr, int chip)
 154 {
 155         /* Select the individual flash chip requested */
 156         WriteDOC(chip, docptr, CDSNDeviceSelect);
 157         DoC_Delay(docptr, 4);
 158
 159         /* Wait for it to be ready */
 160         return DoC_WaitReady(docptr);
 161 }
 162
 163 /* DoC_SelectFloor: Select a given floor (bank of flash chips) */
 164 static int DoC_SelectFloor(void __iomem * docptr, int floor)
 165 {
 166         /* Select the floor (bank) of chips required */
 167         WriteDOC(floor, docptr, FloorSelect);
 168
 169         /* Wait for the chip to be ready */
 170         return DoC_WaitReady(docptr);
 171 }
 172
 173 /* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
 174 static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
 175 {
 176         int mfr, id, i, j;
 177         volatile char dummy;
 178
 179         /* Page in the required floor/chip
 180            FIXME: is this supported by Millennium ?? */
 181         DoC_SelectFloor(doc->virtadr, floor);
 182         DoC_SelectChip(doc->virtadr, chip);
 183
 184         /* Reset the chip, see Software Requirement 11.4 item 1. */
 185         DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP);
 186         DoC_WaitReady(doc->virtadr);
 187
 188         /* Read the NAND chip ID: 1. Send ReadID command */
 189         DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP);
 190
 191         /* Read the NAND chip ID: 2. Send address byte zero */
 192         DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00);
 193
 194         /* Read the manufacturer and device id codes of the flash device through
 195            CDSN IO register see Software Requirement 11.4 item 5.*/
 196         dummy = ReadDOC(doc->virtadr, ReadPipeInit);
 197         DoC_Delay(doc->virtadr, 2);
 198         mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO);
 199
 200         DoC_Delay(doc->virtadr, 2);
 201         id  = ReadDOC(doc->virtadr, Mil_CDSN_IO);
 202         dummy = ReadDOC(doc->virtadr, LastDataRead);
 203
 204         /* No response - return failure */
 205         if (mfr == 0xff || mfr == 0)
 206                 return 0;
 207
 208         /* FIXME: to deal with multi-flash on multi-Millennium case more carefully */
 209         for (i = 0; nand_flash_ids[i].name != NULL; i++) {
 210                 if ( id == nand_flash_ids[i].id) {
 211                         /* Try to identify manufacturer */
 212                         for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
 213                                 if (nand_manuf_ids[j].id == mfr)
 214                                         break;
 215                         }
 216                         printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, "
 217                                "Chip ID: %2.2X (%s:%s)\n",
 218                                mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name);
 219                         doc->mfr = mfr;
 220                         doc->id = id;
 221                         doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1;
 222                         break;
 223                 }
 224         }
 225
 226         if (nand_flash_ids[i].name == NULL)
 227                 return 0;
 228         else
 229                 return 1;
 230 }
 231
 232 /* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
 233 static void DoC_ScanChips(struct DiskOnChip *this)
 234 {
 235         int floor, chip;
 236         int numchips[MAX_FLOORS_MIL];
 237         int ret;
 238
 239         this->numchips = 0;
 240         this->mfr = 0;
 241         this->id = 0;
 242
 243         /* For each floor, find the number of valid chips it contains */
 244         for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) {
 245                 numchips[floor] = 0;
 246                 for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) {
 247                         ret = DoC_IdentChip(this, floor, chip);
 248                         if (ret) {
 249                                 numchips[floor]++;
 250                                 this->numchips++;
 251                         }
 252                 }
 253         }
 254         /* If there are none at all that we recognise, bail */
 255         if (!this->numchips) {
 256                 printk("No flash chips recognised.\n");
 257                 return;
 258         }
 259
 260         /* Allocate an array to hold the information for each chip */
 261         this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
 262         if (!this->chips){
 263                 printk("No memory for allocating chip info structures\n");
 264                 return;
 265         }
 266
 267         /* Fill out the chip array with {floor, chipno} for each
 268          * detected chip in the device. */
 269         for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) {
 270                 for (chip = 0 ; chip < numchips[floor] ; chip++) {
 271                         this->chips[ret].floor = floor;
 272                         this->chips[ret].chip = chip;
 273                         this->chips[ret].curadr = 0;
 274                         this->chips[ret].curmode = 0x50;
 275                         ret++;
 276                 }
 277         }
 278
 279         /* Calculate and print the total size of the device */
 280         this->totlen = this->numchips * (1 << this->chipshift);
 281         printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
 282                this->numchips ,this->totlen >> 20);
 283 }
 284
 285 static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
 286 {
 287         int tmp1, tmp2, retval;
 288
 289         if (doc1->physadr == doc2->physadr)
 290                 return 1;
 291
 292         /* Use the alias resolution register which was set aside for this
 293          * purpose. If it's value is the same on both chips, they might
 294          * be the same chip, and we write to one and check for a change in
 295          * the other. It's unclear if this register is usuable in the
 296          * DoC 2000 (it's in the Millenium docs), but it seems to work. */
 297         tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
 298         tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
 299         if (tmp1 != tmp2)
 300                 return 0;
 301
 302         WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution);
 303         tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
 304         if (tmp2 == (tmp1+1) % 0xff)
 305                 retval = 1;
 306         else
 307                 retval = 0;
 308
 309         /* Restore register contents.  May not be necessary, but do it just to
 310          * be safe. */
 311         WriteDOC(tmp1, doc1->virtadr, AliasResolution);
 312
 313         return retval;
 314 }
 315
 316 /* This routine is found from the docprobe code by symbol_get(),
 317  * which will bump the use count of this module. */
 318 void DoCMil_init(struct mtd_info *mtd)
 319 {
 320         struct DiskOnChip *this = mtd->priv;
 321         struct DiskOnChip *old = NULL;
 322
 323         /* We must avoid being called twice for the same device. */
 324         if (docmillist)
 325                 old = docmillist->priv;
 326
 327         while (old) {
 328                 if (DoCMil_is_alias(this, old)) {
 329                         printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at "
 330                                "0x%lX - already configured\n", this->physadr);
 331                         iounmap(this->virtadr);
 332                         kfree(mtd);
 333                         return;
 334                 }
 335                 if (old->nextdoc)
 336                         old = old->nextdoc->priv;
 337                 else
 338                         old = NULL;
 339         }
 340
 341         mtd->name = "DiskOnChip Millennium";
 342         printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n",
 343                this->physadr);
 344
 345         mtd->type = MTD_NANDFLASH;
 346         mtd->flags = MTD_CAP_NANDFLASH;
 347         mtd->size = 0;
 348
 349         /* FIXME: erase size is not always 8KiB */
 350         mtd->erasesize = 0x2000;
 351
 352         mtd->writesize = 512;
 353         mtd->oobsize = 16;
 354         mtd->owner = THIS_MODULE;
 355         mtd->erase = doc_erase;
 356         mtd->point = NULL;
 357         mtd->unpoint = NULL;
 358         mtd->read = doc_read;
 359         mtd->write = doc_write;
 360         mtd->read_oob = doc_read_oob;
 361         mtd->write_oob = doc_write_oob;
 362         mtd->sync = NULL;
 363
 364         this->totlen = 0;
 365         this->numchips = 0;
 366         this->curfloor = -1;
 367         this->curchip = -1;
 368
 369         /* Ident all the chips present. */
 370         DoC_ScanChips(this);
 371
 372         if (!this->totlen) {
 373                 kfree(mtd);
 374                 iounmap(this->virtadr);
 375         } else {
 376                 this->nextdoc = docmillist;
 377                 docmillist = mtd;
 378                 mtd->size  = this->totlen;
 379                 add_mtd_device(mtd);
 380                 return;
 381         }
 382 }
 383 EXPORT_SYMBOL_GPL(DoCMil_init);
 384
 385 static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
 386                      size_t *retlen, u_char *buf)
 387 {
 388         int i, ret;
 389         volatile char dummy;
 390         unsigned char syndrome[6], eccbuf[6];
 391         struct DiskOnChip *this = mtd->priv;
 392         void __iomem *docptr = this->virtadr;
 393         struct Nand *mychip = &this->chips[from >> (this->chipshift)];
 394
 395         /* Don't allow read past end of device */
 396         if (from >= this->totlen)
 397                 return -EINVAL;
 398
 399         /* Don't allow a single read to cross a 512-byte block boundary */
 400         if (from + len > ((from | 0x1ff) + 1))
 401                 len = ((from | 0x1ff) + 1) - from;
 402
 403         /* Find the chip which is to be used and select it */
 404         if (this->curfloor != mychip->floor) {
 405                 DoC_SelectFloor(docptr, mychip->floor);
 406                 DoC_SelectChip(docptr, mychip->chip);
 407         } else if (this->curchip != mychip->chip) {
 408                 DoC_SelectChip(docptr, mychip->chip);
 409         }
 410         this->curfloor = mychip->floor;
 411         this->curchip = mychip->chip;
 412
 413         /* issue the Read0 or Read1 command depend on which half of the page
 414            we are accessing. Polling the Flash Ready bit after issue 3 bytes
 415            address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/
 416         DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP);
 417         DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00);
 418         DoC_WaitReady(docptr);
 419
 420         /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
 421         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 422         WriteDOC (DOC_ECC_EN, docptr, ECCConf);
 423
 424         /* Read the data via the internal pipeline through CDSN IO register,
 425            see Pipelined Read Operations 11.3 */
 426         dummy = ReadDOC(docptr, ReadPipeInit);
 427 #ifndef USE_MEMCPY
 428         for (i = 0; i < len-1; i++) {
 429                 /* N.B. you have to increase the source address in this way or the
 430                    ECC logic will not work properly */
 431                 buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
 432         }
 433 #else
 434         memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
 435 #endif
 436         buf[len - 1] = ReadDOC(docptr, LastDataRead);
 437
 438         /* Let the caller know we completed it */
 439         *retlen = len;
 440         ret = 0;
 441
 442         /* Read the ECC data from Spare Data Area,
 443            see Reed-Solomon EDC/ECC 11.1 */
 444         dummy = ReadDOC(docptr, ReadPipeInit);
 445 #ifndef USE_MEMCPY
 446         for (i = 0; i < 5; i++) {
 447                 /* N.B. you have to increase the source address in this way or the
 448                    ECC logic will not work properly */
 449                 eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
 450         }
 451 #else
 452         memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5);
 453 #endif
 454         eccbuf[5] = ReadDOC(docptr, LastDataRead);
 455
 456         /* Flush the pipeline */
 457         dummy = ReadDOC(docptr, ECCConf);
 458         dummy = ReadDOC(docptr, ECCConf);
 459
 460         /* Check the ECC Status */
 461         if (ReadDOC(docptr, ECCConf) & 0x80) {
 462                 int nb_errors;
 463                 /* There was an ECC error */
 464 #ifdef ECC_DEBUG
 465                 printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
 466 #endif
 467                 /* Read the ECC syndrom through the DiskOnChip ECC logic.
 468                    These syndrome will be all ZERO when there is no error */
 469                 for (i = 0; i < 6; i++) {
 470                         syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
 471                 }
 472                 nb_errors = doc_decode_ecc(buf, syndrome);
 473 #ifdef ECC_DEBUG
 474                 printk("ECC Errors corrected: %x\n", nb_errors);
 475 #endif
 476                 if (nb_errors < 0) {
 477                         /* We return error, but have actually done the read. Not that
 478                            this can be told to user-space, via sys_read(), but at least
 479                            MTD-aware stuff can know about it by checking *retlen */
 480                         ret = -EIO;
 481                 }
 482         }
 483
 484 #ifdef PSYCHO_DEBUG
 485         printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
 486                (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
 487                eccbuf[4], eccbuf[5]);
 488 #endif
 489
 490         /* disable the ECC engine */
 491         WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 492
 493         return ret;
 494 }
 495
 496 static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
 497                       size_t *retlen, const u_char *buf)
 498 {
 499         int i,ret = 0;
 500         char eccbuf[6];
 501         volatile char dummy;
 502         struct DiskOnChip *this = mtd->priv;
 503         void __iomem *docptr = this->virtadr;
 504         struct Nand *mychip = &this->chips[to >> (this->chipshift)];
 505
 506         /* Don't allow write past end of device */
 507         if (to >= this->totlen)
 508                 return -EINVAL;
 509
 510 #if 0
 511         /* Don't allow a single write to cross a 512-byte block boundary */
 512         if (to + len > ( (to | 0x1ff) + 1))
 513                 len = ((to | 0x1ff) + 1) - to;
 514 #else
 515         /* Don't allow writes which aren't exactly one block */
 516         if (to & 0x1ff || len != 0x200)
 517                 return -EINVAL;
 518 #endif
 519
 520         /* Find the chip which is to be used and select it */
 521         if (this->curfloor != mychip->floor) {
 522                 DoC_SelectFloor(docptr, mychip->floor);
 523                 DoC_SelectChip(docptr, mychip->chip);
 524         } else if (this->curchip != mychip->chip) {
 525                 DoC_SelectChip(docptr, mychip->chip);
 526         }
 527         this->curfloor = mychip->floor;
 528         this->curchip = mychip->chip;
 529
 530         /* Reset the chip, see Software Requirement 11.4 item 1. */
 531         DoC_Command(docptr, NAND_CMD_RESET, 0x00);
 532         DoC_WaitReady(docptr);
 533         /* Set device to main plane of flash */
 534         DoC_Command(docptr, NAND_CMD_READ0, 0x00);
 535
 536         /* issue the Serial Data In command to initial the Page Program process */
 537         DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
 538         DoC_Address(docptr, 3, to, 0x00, 0x00);
 539         DoC_WaitReady(docptr);
 540
 541         /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
 542         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 543         WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
 544
 545         /* Write the data via the internal pipeline through CDSN IO register,
 546            see Pipelined Write Operations 11.2 */
 547 #ifndef USE_MEMCPY
 548         for (i = 0; i < len; i++) {
 549                 /* N.B. you have to increase the source address in this way or the
 550                    ECC logic will not work properly */
 551                 WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
 552         }
 553 #else
 554         memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
 555 #endif
 556         WriteDOC(0x00, docptr, WritePipeTerm);
 557
 558         /* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic
 559            see Reed-Solomon EDC/ECC 11.1 */
 560         WriteDOC(0, docptr, NOP);
 561         WriteDOC(0, docptr, NOP);
 562         WriteDOC(0, docptr, NOP);
 563
 564         /* Read the ECC data through the DiskOnChip ECC logic */
 565         for (i = 0; i < 6; i++) {
 566                 eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i);
 567         }
 568
 569         /* ignore the ECC engine */
 570         WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 571
 572 #ifndef USE_MEMCPY
 573         /* Write the ECC data to flash */
 574         for (i = 0; i < 6; i++) {
 575                 /* N.B. you have to increase the source address in this way or the
 576                    ECC logic will not work properly */
 577                 WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i);
 578         }
 579 #else
 580         memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6);
 581 #endif
 582
 583         /* write the block status BLOCK_USED (0x5555) at the end of ECC data
 584            FIXME: this is only a hack for programming the IPL area for LinuxBIOS
 585            and should be replace with proper codes in user space utilities */
 586         WriteDOC(0x55, docptr, Mil_CDSN_IO);
 587         WriteDOC(0x55, docptr, Mil_CDSN_IO + 1);
 588
 589         WriteDOC(0x00, docptr, WritePipeTerm);
 590
 591 #ifdef PSYCHO_DEBUG
 592         printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
 593                (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
 594                eccbuf[4], eccbuf[5]);
 595 #endif
 596
 597         /* Commit the Page Program command and wait for ready
 598            see Software Requirement 11.4 item 1.*/
 599         DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
 600         DoC_WaitReady(docptr);
 601
 602         /* Read the status of the flash device through CDSN IO register
 603            see Software Requirement 11.4 item 5.*/
 604         DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
 605         dummy = ReadDOC(docptr, ReadPipeInit);
 606         DoC_Delay(docptr, 2);
 607         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 608                 printk("Error programming flash\n");
 609                 /* Error in programming
 610                    FIXME: implement Bad Block Replacement (in nftl.c ??) */
 611                 *retlen = 0;
 612                 ret = -EIO;
 613         }
 614         dummy = ReadDOC(docptr, LastDataRead);
 615
 616         /* Let the caller know we completed it */
 617         *retlen = len;
 618
 619         return ret;
 620 }
 621
 622 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
 623                         struct mtd_oob_ops *ops)
 624 {
 625 #ifndef USE_MEMCPY
 626         int i;
 627 #endif
 628         volatile char dummy;
 629         struct DiskOnChip *this = mtd->priv;
 630         void __iomem *docptr = this->virtadr;
 631         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 632         uint8_t *buf = ops->oobbuf;
 633         size_t len = ops->len;
 634
 635         BUG_ON(ops->mode != MTD_OOB_PLACE);
 636
 637         ofs += ops->ooboffs;
 638
 639         /* Find the chip which is to be used and select it */
 640         if (this->curfloor != mychip->floor) {
 641                 DoC_SelectFloor(docptr, mychip->floor);
 642                 DoC_SelectChip(docptr, mychip->chip);
 643         } else if (this->curchip != mychip->chip) {
 644                 DoC_SelectChip(docptr, mychip->chip);
 645         }
 646         this->curfloor = mychip->floor;
 647         this->curchip = mychip->chip;
 648
 649         /* disable the ECC engine */
 650         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 651         WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 652
 653         /* issue the Read2 command to set the pointer to the Spare Data Area.
 654            Polling the Flash Ready bit after issue 3 bytes address in
 655            Sequence Read Mode, see Software Requirement 11.4 item 1.*/
 656         DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
 657         DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00);
 658         DoC_WaitReady(docptr);
 659
 660         /* Read the data out via the internal pipeline through CDSN IO register,
 661            see Pipelined Read Operations 11.3 */
 662         dummy = ReadDOC(docptr, ReadPipeInit);
 663 #ifndef USE_MEMCPY
 664         for (i = 0; i < len-1; i++) {
 665                 /* N.B. you have to increase the source address in this way or the
 666                    ECC logic will not work properly */
 667                 buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
 668         }
 669 #else
 670         memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
 671 #endif
 672         buf[len - 1] = ReadDOC(docptr, LastDataRead);
 673
 674         ops->retlen = len;
 675
 676         return 0;
 677 }
 678
 679 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 680                          struct mtd_oob_ops *ops)
 681 {
 682 #ifndef USE_MEMCPY
 683         int i;
 684 #endif
 685         volatile char dummy;
 686         int ret = 0;
 687         struct DiskOnChip *this = mtd->priv;
 688         void __iomem *docptr = this->virtadr;
 689         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 690         uint8_t *buf = ops->oobbuf;
 691         size_t len = ops->len;
 692
 693         BUG_ON(ops->mode != MTD_OOB_PLACE);
 694
 695         ofs += ops->ooboffs;
 696
 697         /* Find the chip which is to be used and select it */
 698         if (this->curfloor != mychip->floor) {
 699                 DoC_SelectFloor(docptr, mychip->floor);
 700                 DoC_SelectChip(docptr, mychip->chip);
 701         } else if (this->curchip != mychip->chip) {
 702                 DoC_SelectChip(docptr, mychip->chip);
 703         }
 704         this->curfloor = mychip->floor;
 705         this->curchip = mychip->chip;
 706
 707         /* disable the ECC engine */
 708         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 709         WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 710
 711         /* Reset the chip, see Software Requirement 11.4 item 1. */
 712         DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP);
 713         DoC_WaitReady(docptr);
 714         /* issue the Read2 command to set the pointer to the Spare Data Area. */
 715         DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
 716
 717         /* issue the Serial Data In command to initial the Page Program process */
 718         DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
 719         DoC_Address(docptr, 3, ofs, 0x00, 0x00);
 720
 721         /* Write the data via the internal pipeline through CDSN IO register,
 722            see Pipelined Write Operations 11.2 */
 723 #ifndef USE_MEMCPY
 724         for (i = 0; i < len; i++) {
 725                 /* N.B. you have to increase the source address in this way or the
 726                    ECC logic will not work properly */
 727                 WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
 728         }
 729 #else
 730         memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
 731 #endif
 732         WriteDOC(0x00, docptr, WritePipeTerm);
 733
 734         /* Commit the Page Program command and wait for ready
 735            see Software Requirement 11.4 item 1.*/
 736         DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
 737         DoC_WaitReady(docptr);
 738
 739         /* Read the status of the flash device through CDSN IO register
 740            see Software Requirement 11.4 item 5.*/
 741         DoC_Command(docptr, NAND_CMD_STATUS, 0x00);
 742         dummy = ReadDOC(docptr, ReadPipeInit);
 743         DoC_Delay(docptr, 2);
 744         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 745                 printk("Error programming oob data\n");
 746                 /* FIXME: implement Bad Block Replacement (in nftl.c ??) */
 747                 ops->retlen = 0;
 748                 ret = -EIO;
 749         }
 750         dummy = ReadDOC(docptr, LastDataRead);
 751
 752         ops->retlen = len;
 753
 754         return ret;
 755 }
 756
 757 int doc_erase (struct mtd_info *mtd, struct erase_info *instr)
 758 {
 759         volatile char dummy;
 760         struct DiskOnChip *this = mtd->priv;
 761         __u32 ofs = instr->addr;
 762         __u32 len = instr->len;
 763         void __iomem *docptr = this->virtadr;
 764         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 765
 766         if (len != mtd->erasesize)
 767                 printk(KERN_WARNING "Erase not right size (%x != %x)n",
 768                        len, mtd->erasesize);
 769
 770         /* Find the chip which is to be used and select it */
 771         if (this->curfloor != mychip->floor) {
 772                 DoC_SelectFloor(docptr, mychip->floor);
 773                 DoC_SelectChip(docptr, mychip->chip);
 774         } else if (this->curchip != mychip->chip) {
 775                 DoC_SelectChip(docptr, mychip->chip);
 776         }
 777         this->curfloor = mychip->floor;
 778         this->curchip = mychip->chip;
 779
 780         instr->state = MTD_ERASE_PENDING;
 781
 782         /* issue the Erase Setup command */
 783         DoC_Command(docptr, NAND_CMD_ERASE1, 0x00);
 784         DoC_Address(docptr, 2, ofs, 0x00, 0x00);
 785
 786         /* Commit the Erase Start command and wait for ready
 787            see Software Requirement 11.4 item 1.*/
 788         DoC_Command(docptr, NAND_CMD_ERASE2, 0x00);
 789         DoC_WaitReady(docptr);
 790
 791         instr->state = MTD_ERASING;
 792
 793         /* Read the status of the flash device through CDSN IO register
 794            see Software Requirement 11.4 item 5.
 795            FIXME: it seems that we are not wait long enough, some blocks are not
 796            erased fully */
 797         DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
 798         dummy = ReadDOC(docptr, ReadPipeInit);
 799         DoC_Delay(docptr, 2);
 800         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 801                 printk("Error Erasing at 0x%x\n", ofs);
 802                 /* There was an error
 803                    FIXME: implement Bad Block Replacement (in nftl.c ??) */
 804                 instr->state = MTD_ERASE_FAILED;
 805         } else
 806                 instr->state = MTD_ERASE_DONE;
 807         dummy = ReadDOC(docptr, LastDataRead);
 808
 809         mtd_erase_callback(instr);
 810
 811         return 0;
 812 }
 813
 814 /****************************************************************************
 815  *
 816  * Module stuff
 817  *
 818  ****************************************************************************/
 819
 820 static void __exit cleanup_doc2001(void)
 821 {
 822         struct mtd_info *mtd;
 823         struct DiskOnChip *this;
 824
 825         while ((mtd=docmillist)) {
 826                 this = mtd->priv;
 827                 docmillist = this->nextdoc;
 828
 829                 del_mtd_device(mtd);
 830
 831                 iounmap(this->virtadr);
 832                 kfree(this->chips);
 833                 kfree(mtd);
 834         }
 835 }
 836
 837 module_exit(cleanup_doc2001);
 838
 839 MODULE_LICENSE("GPL");
 840 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
 841 MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium");