2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/version.h>
29 #include <linux/module.h>
30 #include <linux/jiffies.h>
31 #include <linux/timer.h>
32 #include <linux/sched.h>
34 #include <linux/delay.h>
35 #include <linux/wireless.h>
37 #include "ieee80211/rtl819x_HT.h"
38 #include "ieee80211/rtl819x_BA.h"
39 #include "ieee80211/rtl819x_TS.h"
41 #ifndef IW_MODE_MONITOR
42 #define IW_MODE_MONITOR 6
46 #define IWEVCUSTOM 0x8c02
51 * container_of - cast a member of a structure out to the containing structure
53 * @ptr: the pointer to the member.
54 * @type: the type of the container struct this is embedded in.
55 * @member: the name of the member within the struct.
58 #define container_of(ptr, type, member) ({ \
59 const typeof( ((type *)0)->member ) *__mptr = (ptr); \
60 (type *)( (char *)__mptr - offsetof(type,member) );})
63 #define KEY_TYPE_NA 0x0
64 #define KEY_TYPE_WEP40 0x1
65 #define KEY_TYPE_TKIP 0x2
66 #define KEY_TYPE_CCMP 0x4
67 #define KEY_TYPE_WEP104 0x5
69 /* added for rtl819x tx procedure */
70 #define MAX_QUEUE_SIZE 0x10
83 #define BEACON_QUEUE 8
85 #define LOW_QUEUE BE_QUEUE
86 #define NORMAL_QUEUE MGNT_QUEUE
89 #define SWRF_TIMEOUT 50
91 //added by amy for LEAP related
92 #define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
93 #define SUPPORT_CKIP_MIC 0x08 // bit3
94 #define SUPPORT_CKIP_PK 0x10 // bit4
95 /* defined for skb cb field */
97 typedef struct cb_desc
{
98 /* Tx Desc Related flags (8-9) */
104 u8 bTxDisableRateFallBack
:1;
105 u8 bTxUseDriverAssingedRate
:1;
106 u8 bHwSec
:1; //indicate whether use Hw security. WB
110 /* Tx Firmware Relaged flags (10-11)*/
114 u8 bUseShortPreamble
:1;
115 u8 bTxEnableFwCalcDur
:1;
122 u8 bRTSUseShortPreamble
:1;
130 /* Tx Desc related element(12-19) */
142 /* Tx firmware related element(20-27) */
155 /*--------------------------Define -------------------------------------------*/
158 #define MGN_5_5M 0x0b
170 #define MGN_MCS0 0x80
171 #define MGN_MCS1 0x81
172 #define MGN_MCS2 0x82
173 #define MGN_MCS3 0x83
174 #define MGN_MCS4 0x84
175 #define MGN_MCS5 0x85
176 #define MGN_MCS6 0x86
177 #define MGN_MCS7 0x87
178 #define MGN_MCS8 0x88
179 #define MGN_MCS9 0x89
180 #define MGN_MCS10 0x8a
181 #define MGN_MCS11 0x8b
182 #define MGN_MCS12 0x8c
183 #define MGN_MCS13 0x8d
184 #define MGN_MCS14 0x8e
185 #define MGN_MCS15 0x8f
187 //----------------------------------------------------------------------------
188 // 802.11 Management frame Reason Code field
189 //----------------------------------------------------------------------------
192 auth_not_valid
= 0x2,
205 // Reason code defined in 802.11i D10.0 p.28.
207 four_way_tmout
= 0x0f,
208 two_way_tmout
= 0x10,
210 invalid_Gcipher
= 0x12,
211 invalid_Pcipher
= 0x13,
213 unsup_RSNIEver
= 0x15,
214 invalid_RSNIE
= 0x16,
215 auth_802_1x_fail
= 0x17,
218 // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
219 QoS_unspec
= 0x20, // 32
220 QAP_bandwidth
= 0x21, // 33
221 poor_condition
= 0x22, // 34
222 no_facility
= 0x23, // 35
224 req_declined
= 0x25, // 37
225 invalid_param
= 0x26, // 38
226 req_not_honored
= 0x27, // 39
227 TS_not_created
= 0x2F, // 47
228 DL_not_allowed
= 0x30, // 48
229 dest_not_exist
= 0x31, // 49
230 dest_not_QSTA
= 0x32, // 50
235 #define aSifsTime (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
237 #define MGMT_QUEUE_NUM 5
239 #define IEEE_CMD_SET_WPA_PARAM 1
240 #define IEEE_CMD_SET_WPA_IE 2
241 #define IEEE_CMD_SET_ENCRYPTION 3
242 #define IEEE_CMD_MLME 4
244 #define IEEE_PARAM_WPA_ENABLED 1
245 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
246 #define IEEE_PARAM_DROP_UNENCRYPTED 3
247 #define IEEE_PARAM_PRIVACY_INVOKED 4
248 #define IEEE_PARAM_AUTH_ALGS 5
249 #define IEEE_PARAM_IEEE_802_1X 6
250 //It should consistent with the driver_XXX.c
252 #define IEEE_PARAM_WPAX_SELECT 7
253 //Added for notify the encryption type selection
255 #define IEEE_PROTO_WPA 1
256 #define IEEE_PROTO_RSN 2
257 //Added for notify the encryption type selection
259 #define IEEE_WPAX_USEGROUP 0
260 #define IEEE_WPAX_WEP40 1
261 #define IEEE_WPAX_TKIP 2
262 #define IEEE_WPAX_WRAP 3
263 #define IEEE_WPAX_CCMP 4
264 #define IEEE_WPAX_WEP104 5
266 #define IEEE_KEY_MGMT_IEEE8021X 1
267 #define IEEE_KEY_MGMT_PSK 2
269 #define IEEE_MLME_STA_DEAUTH 1
270 #define IEEE_MLME_STA_DISASSOC 2
273 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
274 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
275 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
276 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
277 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
278 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
281 #define IEEE_CRYPT_ALG_NAME_LEN 16
283 #define MAX_IE_LEN 0xff
285 // added for kernel conflict
286 #define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl
287 #define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl
288 #define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl
289 #define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rsl
290 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
291 #define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rsl
293 #define ieee80211_ccmp_null ieee80211_ccmp_null_rsl
295 #define ieee80211_tkip_null ieee80211_tkip_null_rsl
297 #define ieee80211_wep_null ieee80211_wep_null_rsl
299 #define free_ieee80211 free_ieee80211_rsl
300 #define alloc_ieee80211 alloc_ieee80211_rsl
302 #define ieee80211_rx ieee80211_rx_rsl
303 #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl
305 #define ieee80211_get_beacon ieee80211_get_beacon_rsl
306 #define ieee80211_wake_queue ieee80211_wake_queue_rsl
307 #define ieee80211_stop_queue ieee80211_stop_queue_rsl
308 #define ieee80211_reset_queue ieee80211_reset_queue_rsl
309 #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl
310 #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
311 #define ieee80211_is_shortslot ieee80211_is_shortslot_rsl
312 #define ieee80211_is_54g ieee80211_is_54g_rsl
313 #define ieee80211_wpa_supplicant_ioctl ieee80211_wpa_supplicant_ioctl_rsl
314 #define ieee80211_ps_tx_ack ieee80211_ps_tx_ack_rsl
315 #define ieee80211_softmac_xmit ieee80211_softmac_xmit_rsl
316 #define ieee80211_stop_send_beacons ieee80211_stop_send_beacons_rsl
317 #define notify_wx_assoc_event notify_wx_assoc_event_rsl
318 #define SendDisassociation SendDisassociation_rsl
319 #define ieee80211_disassociate ieee80211_disassociate_rsl
320 #define ieee80211_start_send_beacons ieee80211_start_send_beacons_rsl
321 #define ieee80211_stop_scan ieee80211_stop_scan_rsl
322 #define ieee80211_send_probe_requests ieee80211_send_probe_requests_rsl
323 #define ieee80211_softmac_scan_syncro ieee80211_softmac_scan_syncro_rsl
324 #define ieee80211_start_scan_syncro ieee80211_start_scan_syncro_rsl
326 #define ieee80211_wx_get_essid ieee80211_wx_get_essid_rsl
327 #define ieee80211_wx_set_essid ieee80211_wx_set_essid_rsl
328 #define ieee80211_wx_set_rate ieee80211_wx_set_rate_rsl
329 #define ieee80211_wx_get_rate ieee80211_wx_get_rate_rsl
330 #define ieee80211_wx_set_wap ieee80211_wx_set_wap_rsl
331 #define ieee80211_wx_get_wap ieee80211_wx_get_wap_rsl
332 #define ieee80211_wx_set_mode ieee80211_wx_set_mode_rsl
333 #define ieee80211_wx_get_mode ieee80211_wx_get_mode_rsl
334 #define ieee80211_wx_set_scan ieee80211_wx_set_scan_rsl
335 #define ieee80211_wx_get_freq ieee80211_wx_get_freq_rsl
336 #define ieee80211_wx_set_freq ieee80211_wx_set_freq_rsl
337 #define ieee80211_wx_set_rawtx ieee80211_wx_set_rawtx_rsl
338 #define ieee80211_wx_get_name ieee80211_wx_get_name_rsl
339 #define ieee80211_wx_set_power ieee80211_wx_set_power_rsl
340 #define ieee80211_wx_get_power ieee80211_wx_get_power_rsl
341 #define ieee80211_wlan_frequencies ieee80211_wlan_frequencies_rsl
342 #define ieee80211_wx_set_rts ieee80211_wx_set_rts_rsl
343 #define ieee80211_wx_get_rts ieee80211_wx_get_rts_rsl
345 #define ieee80211_txb_free ieee80211_txb_free_rsl
347 #define ieee80211_wx_set_gen_ie ieee80211_wx_set_gen_ie_rsl
348 #define ieee80211_wx_get_scan ieee80211_wx_get_scan_rsl
349 #define ieee80211_wx_set_encode ieee80211_wx_set_encode_rsl
350 #define ieee80211_wx_get_encode ieee80211_wx_get_encode_rsl
351 #if WIRELESS_EXT >= 18
352 #define ieee80211_wx_set_mlme ieee80211_wx_set_mlme_rsl
353 #define ieee80211_wx_set_auth ieee80211_wx_set_auth_rsl
354 #define ieee80211_wx_set_encode_ext ieee80211_wx_set_encode_ext_rsl
355 #define ieee80211_wx_get_encode_ext ieee80211_wx_get_encode_ext_rsl
359 typedef struct ieee_param
{
361 u8 sta_addr
[ETH_ALEN
];
377 u8 alg
[IEEE_CRYPT_ALG_NAME_LEN
];
381 u8 seq
[8]; /* sequence counter (set: RX, get: TX) */
389 #if WIRELESS_EXT < 17
390 #define IW_QUAL_QUAL_INVALID 0x10
391 #define IW_QUAL_LEVEL_INVALID 0x20
392 #define IW_QUAL_NOISE_INVALID 0x40
393 #define IW_QUAL_QUAL_UPDATED 0x1
394 #define IW_QUAL_LEVEL_UPDATED 0x2
395 #define IW_QUAL_NOISE_UPDATED 0x4
398 #define MSECS(t) msecs_to_jiffies(t)
399 #define msleep_interruptible_rsl msleep_interruptible
401 #define IEEE80211_DATA_LEN 2304
402 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
405 The figure in section 7.1.2 suggests a body size of up to 2312
406 bytes is allowed, which is a bit confusing, I suspect this
407 represents the 2304 bytes of real data, plus a possible 8 bytes of
408 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
409 #define IEEE80211_1ADDR_LEN 10
410 #define IEEE80211_2ADDR_LEN 16
411 #define IEEE80211_3ADDR_LEN 24
412 #define IEEE80211_4ADDR_LEN 30
413 #define IEEE80211_FCS_LEN 4
414 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
415 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
416 #define IEEE80211_MGMT_HDR_LEN 24
417 #define IEEE80211_DATA_HDR3_LEN 24
418 #define IEEE80211_DATA_HDR4_LEN 30
420 #define MIN_FRAG_THRESHOLD 256U
421 #define MAX_FRAG_THRESHOLD 2346U
424 /* Frame control field constants */
425 #define IEEE80211_FCTL_VERS 0x0003
426 #define IEEE80211_FCTL_FTYPE 0x000c
427 #define IEEE80211_FCTL_STYPE 0x00f0
428 #define IEEE80211_FCTL_FRAMETYPE 0x00fc
429 #define IEEE80211_FCTL_TODS 0x0100
430 #define IEEE80211_FCTL_FROMDS 0x0200
431 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
432 #define IEEE80211_FCTL_MOREFRAGS 0x0400
433 #define IEEE80211_FCTL_RETRY 0x0800
434 #define IEEE80211_FCTL_PM 0x1000
435 #define IEEE80211_FCTL_MOREDATA 0x2000
436 #define IEEE80211_FCTL_WEP 0x4000
437 #define IEEE80211_FCTL_ORDER 0x8000
439 #define IEEE80211_FTYPE_MGMT 0x0000
440 #define IEEE80211_FTYPE_CTL 0x0004
441 #define IEEE80211_FTYPE_DATA 0x0008
444 #define IEEE80211_STYPE_ASSOC_REQ 0x0000
445 #define IEEE80211_STYPE_ASSOC_RESP 0x0010
446 #define IEEE80211_STYPE_REASSOC_REQ 0x0020
447 #define IEEE80211_STYPE_REASSOC_RESP 0x0030
448 #define IEEE80211_STYPE_PROBE_REQ 0x0040
449 #define IEEE80211_STYPE_PROBE_RESP 0x0050
450 #define IEEE80211_STYPE_BEACON 0x0080
451 #define IEEE80211_STYPE_ATIM 0x0090
452 #define IEEE80211_STYPE_DISASSOC 0x00A0
453 #define IEEE80211_STYPE_AUTH 0x00B0
454 #define IEEE80211_STYPE_DEAUTH 0x00C0
455 #define IEEE80211_STYPE_MANAGE_ACT 0x00D0
458 #define IEEE80211_STYPE_PSPOLL 0x00A0
459 #define IEEE80211_STYPE_RTS 0x00B0
460 #define IEEE80211_STYPE_CTS 0x00C0
461 #define IEEE80211_STYPE_ACK 0x00D0
462 #define IEEE80211_STYPE_CFEND 0x00E0
463 #define IEEE80211_STYPE_CFENDACK 0x00F0
464 #define IEEE80211_STYPE_BLOCKACK 0x0094
467 #define IEEE80211_STYPE_DATA 0x0000
468 #define IEEE80211_STYPE_DATA_CFACK 0x0010
469 #define IEEE80211_STYPE_DATA_CFPOLL 0x0020
470 #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
471 #define IEEE80211_STYPE_NULLFUNC 0x0040
472 #define IEEE80211_STYPE_CFACK 0x0050
473 #define IEEE80211_STYPE_CFPOLL 0x0060
474 #define IEEE80211_STYPE_CFACKPOLL 0x0070
475 #define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
476 #define IEEE80211_STYPE_QOS_NULL 0x00C0
478 #define IEEE80211_SCTL_FRAG 0x000F
479 #define IEEE80211_SCTL_SEQ 0xFFF0
482 #define IEEE80211_QCTL_TID 0x000F
484 #define FC_QOS_BIT BIT7
485 #define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
486 #define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
487 //added by wb. Is this right?
488 #define IsQoSDataFrame(pframe) ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
489 #define Frame_Order(pframe) (*(u16*)pframe&IEEE80211_FCTL_ORDER)
490 #define SN_LESS(a, b) (((a-b)&0x800)!=0)
491 #define SN_EQUAL(a, b) (a == b)
492 #define MAX_DEV_ADDR_SIZE 8
493 typedef enum _ACT_CATEGORY
{
499 } ACT_CATEGORY
, *PACT_CATEGORY
;
501 typedef enum _TS_ACTION
{
506 } TS_ACTION
, *PTS_ACTION
;
508 typedef enum _BA_ACTION
{
512 } BA_ACTION
, *PBA_ACTION
;
514 typedef enum _InitialGainOpType
{
521 #define CONFIG_IEEE80211_DEBUG
522 #ifdef CONFIG_IEEE80211_DEBUG
523 extern u32 ieee80211_debug_level
;
524 #define IEEE80211_DEBUG(level, fmt, args...) \
525 do { if (ieee80211_debug_level & (level)) \
526 printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
527 //wb added to debug out data buf
528 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
529 #define IEEE80211_DEBUG_DATA(level, data, datalen) \
530 do{ if ((ieee80211_debug_level & (level)) == (level)) \
533 u8* pdata = (u8*) data; \
534 printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \
535 for(i=0; i<(int)(datalen); i++) \
537 printk("%2x ", pdata[i]); \
538 if ((i+1)%16 == 0) printk("\n"); \
544 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
545 #define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
546 #endif /* CONFIG_IEEE80211_DEBUG */
548 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
550 #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
551 #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
554 * To use the debug system;
556 * If you are defining a new debug classification, simply add it to the #define
557 * list here in the form of:
559 * #define IEEE80211_DL_xxxx VALUE
561 * shifting value to the left one bit from the previous entry. xxxx should be
562 * the name of the classification (for example, WEP)
564 * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
565 * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
566 * to send output to that classification.
568 * To add your debug level to the list of levels seen when you perform
570 * % cat /proc/net/ipw/debug_level
572 * you simply need to add your entry to the ipw_debug_levels array.
574 * If you do not see debug_level in /proc/net/ipw then you do not have
575 * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
579 #define IEEE80211_DL_INFO (1<<0)
580 #define IEEE80211_DL_WX (1<<1)
581 #define IEEE80211_DL_SCAN (1<<2)
582 #define IEEE80211_DL_STATE (1<<3)
583 #define IEEE80211_DL_MGMT (1<<4)
584 #define IEEE80211_DL_FRAG (1<<5)
585 #define IEEE80211_DL_EAP (1<<6)
586 #define IEEE80211_DL_DROP (1<<7)
588 #define IEEE80211_DL_TX (1<<8)
589 #define IEEE80211_DL_RX (1<<9)
591 #define IEEE80211_DL_HT (1<<10) //HT
592 #define IEEE80211_DL_BA (1<<11) //ba
593 #define IEEE80211_DL_TS (1<<12) //TS
594 #define IEEE80211_DL_QOS (1<<13)
595 #define IEEE80211_DL_REORDER (1<<14)
596 #define IEEE80211_DL_IOT (1<<15)
597 #define IEEE80211_DL_IPS (1<<16)
598 #define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
599 #define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
600 #define IEEE80211_DL_ERR (1<<31) //always open
601 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
602 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
603 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
605 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
606 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
607 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
608 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
609 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
610 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
611 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
612 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
613 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
614 #define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
616 #ifdef CONFIG_IEEE80211_DEBUG
617 /* Added by Annie, 2005-11-22. */
618 #define MAX_STR_LEN 64
619 /* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
620 #define PRINTABLE(_ch) (_ch>'!' && _ch<'~')
621 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \
622 if((_Comp) & level) \
625 u8 buffer[MAX_STR_LEN]; \
626 int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
627 memset(buffer, 0, MAX_STR_LEN); \
628 memcpy(buffer, (u8 *)_Ptr, length ); \
629 for( __i=0; __i<MAX_STR_LEN; __i++ ) \
631 if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
633 buffer[length] = '\0'; \
634 printk("Rtl819x: "); \
635 printk(_TitleString); \
636 printk(": %d, <%s>\n", _Len, buffer); \
639 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) do {} while (0)
642 #include <linux/netdevice.h>
643 #include <linux/if_arp.h> /* ARPHRD_ETHER */
646 #define WIRELESS_SPY // enable iwspy support
648 #include <net/iw_handler.h> // new driver API
651 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
652 #endif /* ETH_P_PAE */
654 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
656 #ifndef ETH_P_80211_RAW
657 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
660 /* IEEE 802.11 defines */
662 #define P80211_OUI_LEN 3
664 struct ieee80211_snap_hdr
{
666 u8 dsap
; /* always 0xAA */
667 u8 ssap
; /* always 0xAA */
668 u8 ctrl
; /* always 0x03 */
669 u8 oui
[P80211_OUI_LEN
]; /* organizational universal id */
671 } __attribute__ ((packed
));
673 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
675 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
676 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
677 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
679 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
680 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
681 #define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
683 /* Authentication algorithms */
684 #define WLAN_AUTH_OPEN 0
685 #define WLAN_AUTH_SHARED_KEY 1
686 #define WLAN_AUTH_LEAP 2
688 #define WLAN_AUTH_CHALLENGE_LEN 128
690 #define WLAN_CAPABILITY_BSS (1<<0)
691 #define WLAN_CAPABILITY_IBSS (1<<1)
692 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
693 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
694 #define WLAN_CAPABILITY_PRIVACY (1<<4)
695 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
696 #define WLAN_CAPABILITY_PBCC (1<<6)
697 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
698 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
699 #define WLAN_CAPABILITY_QOS (1<<9)
700 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
701 #define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
703 /* 802.11g ERP information element */
704 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
705 #define WLAN_ERP_USE_PROTECTION (1<<1)
706 #define WLAN_ERP_BARKER_PREAMBLE (1<<2)
709 enum ieee80211_statuscode
{
710 WLAN_STATUS_SUCCESS
= 0,
711 WLAN_STATUS_UNSPECIFIED_FAILURE
= 1,
712 WLAN_STATUS_CAPS_UNSUPPORTED
= 10,
713 WLAN_STATUS_REASSOC_NO_ASSOC
= 11,
714 WLAN_STATUS_ASSOC_DENIED_UNSPEC
= 12,
715 WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG
= 13,
716 WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION
= 14,
717 WLAN_STATUS_CHALLENGE_FAIL
= 15,
718 WLAN_STATUS_AUTH_TIMEOUT
= 16,
719 WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA
= 17,
720 WLAN_STATUS_ASSOC_DENIED_RATES
= 18,
722 WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE
= 19,
723 WLAN_STATUS_ASSOC_DENIED_NOPBCC
= 20,
724 WLAN_STATUS_ASSOC_DENIED_NOAGILITY
= 21,
726 WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM
= 22,
727 WLAN_STATUS_ASSOC_REJECTED_BAD_POWER
= 23,
728 WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN
= 24,
730 WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME
= 25,
731 WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM
= 26,
733 WLAN_STATUS_INVALID_IE
= 40,
734 WLAN_STATUS_INVALID_GROUP_CIPHER
= 41,
735 WLAN_STATUS_INVALID_PAIRWISE_CIPHER
= 42,
736 WLAN_STATUS_INVALID_AKMP
= 43,
737 WLAN_STATUS_UNSUPP_RSN_VERSION
= 44,
738 WLAN_STATUS_INVALID_RSN_IE_CAP
= 45,
739 WLAN_STATUS_CIPHER_SUITE_REJECTED
= 46,
743 enum ieee80211_reasoncode
{
744 WLAN_REASON_UNSPECIFIED
= 1,
745 WLAN_REASON_PREV_AUTH_NOT_VALID
= 2,
746 WLAN_REASON_DEAUTH_LEAVING
= 3,
747 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
= 4,
748 WLAN_REASON_DISASSOC_AP_BUSY
= 5,
749 WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA
= 6,
750 WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA
= 7,
751 WLAN_REASON_DISASSOC_STA_HAS_LEFT
= 8,
752 WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH
= 9,
754 WLAN_REASON_DISASSOC_BAD_POWER
= 10,
755 WLAN_REASON_DISASSOC_BAD_SUPP_CHAN
= 11,
757 WLAN_REASON_INVALID_IE
= 13,
758 WLAN_REASON_MIC_FAILURE
= 14,
759 WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT
= 15,
760 WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT
= 16,
761 WLAN_REASON_IE_DIFFERENT
= 17,
762 WLAN_REASON_INVALID_GROUP_CIPHER
= 18,
763 WLAN_REASON_INVALID_PAIRWISE_CIPHER
= 19,
764 WLAN_REASON_INVALID_AKMP
= 20,
765 WLAN_REASON_UNSUPP_RSN_VERSION
= 21,
766 WLAN_REASON_INVALID_RSN_IE_CAP
= 22,
767 WLAN_REASON_IEEE8021X_FAILED
= 23,
768 WLAN_REASON_CIPHER_SUITE_REJECTED
= 24,
771 #define IEEE80211_STATMASK_SIGNAL (1<<0)
772 #define IEEE80211_STATMASK_RSSI (1<<1)
773 #define IEEE80211_STATMASK_NOISE (1<<2)
774 #define IEEE80211_STATMASK_RATE (1<<3)
775 #define IEEE80211_STATMASK_WEMASK 0x7
777 #define IEEE80211_CCK_MODULATION (1<<0)
778 #define IEEE80211_OFDM_MODULATION (1<<1)
780 #define IEEE80211_24GHZ_BAND (1<<0)
781 #define IEEE80211_52GHZ_BAND (1<<1)
783 #define IEEE80211_CCK_RATE_LEN 4
784 #define IEEE80211_CCK_RATE_1MB 0x02
785 #define IEEE80211_CCK_RATE_2MB 0x04
786 #define IEEE80211_CCK_RATE_5MB 0x0B
787 #define IEEE80211_CCK_RATE_11MB 0x16
788 #define IEEE80211_OFDM_RATE_LEN 8
789 #define IEEE80211_OFDM_RATE_6MB 0x0C
790 #define IEEE80211_OFDM_RATE_9MB 0x12
791 #define IEEE80211_OFDM_RATE_12MB 0x18
792 #define IEEE80211_OFDM_RATE_18MB 0x24
793 #define IEEE80211_OFDM_RATE_24MB 0x30
794 #define IEEE80211_OFDM_RATE_36MB 0x48
795 #define IEEE80211_OFDM_RATE_48MB 0x60
796 #define IEEE80211_OFDM_RATE_54MB 0x6C
797 #define IEEE80211_BASIC_RATE_MASK 0x80
799 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
800 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
801 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
802 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
803 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
804 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
805 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
806 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
807 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
808 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
809 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
810 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
812 #define IEEE80211_CCK_RATES_MASK 0x0000000F
813 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
814 IEEE80211_CCK_RATE_2MB_MASK)
815 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
816 IEEE80211_CCK_RATE_5MB_MASK | \
817 IEEE80211_CCK_RATE_11MB_MASK)
819 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
820 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
821 IEEE80211_OFDM_RATE_12MB_MASK | \
822 IEEE80211_OFDM_RATE_24MB_MASK)
823 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
824 IEEE80211_OFDM_RATE_9MB_MASK | \
825 IEEE80211_OFDM_RATE_18MB_MASK | \
826 IEEE80211_OFDM_RATE_36MB_MASK | \
827 IEEE80211_OFDM_RATE_48MB_MASK | \
828 IEEE80211_OFDM_RATE_54MB_MASK)
829 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
830 IEEE80211_CCK_DEFAULT_RATES_MASK)
832 #define IEEE80211_NUM_OFDM_RATES 8
833 #define IEEE80211_NUM_CCK_RATES 4
834 #define IEEE80211_OFDM_SHIFT_MASK_A 4
837 /* this is stolen and modified from the madwifi driver*/
838 #define IEEE80211_FC0_TYPE_MASK 0x0c
839 #define IEEE80211_FC0_TYPE_DATA 0x08
840 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
841 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
843 #define IEEE80211_QOS_HAS_SEQ(fc) \
844 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
845 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
847 /* this is stolen from ipw2200 driver */
848 #define IEEE_IBSS_MAC_HASH_SIZE 31
849 struct ieee_ibss_seq
{
853 unsigned long packet_time
[17];
854 struct list_head list
;
857 /* NOTE: This data is for statistical purposes; not all hardware provides this
858 * information for frames received. Not setting these will not cause
859 * any adverse affects. */
860 struct ieee80211_rx_stats
{
866 u16 rate
; /* in 100 kbps */
876 // u8 DataRate; // In 0.5 Mbps
877 u8 SignalQuality
; // in 0-100 index.
878 s32 RecvSignalPower
; // Real power in dBm for this packet, no beautification and aggregation.
879 s8 RxPower
; // in dBm Translate from PWdB
880 u8 SignalStrength
; // in 0-100 index.
884 u16 bShortPreamble
:1;
885 u16 Antenna
:1; //for rtl8185
886 u16 Decrypted
:1; //for rtl8185, rtl8187
887 u16 Wakeup
:1; //for rtl8185
888 u16 Reserved0
:1; //for rtl8185
893 bool bIsQosData
; // Added by Annie, 2005-12-22.
896 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
897 //1Attention Please!!!<11n or 8190 specific code should be put below this line>
898 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
905 bool RxIs40MHzPacket
;
907 u8 RxMIMOSignalStrength
[4]; // in 0~100 index
908 s8 RxMIMOSignalQuality
[2];
909 bool bPacketMatchBSSID
;
914 u16 packetlength
; // Total packet length: Must equal to sum of all FragLength
915 u16 fraglength
; // FragLength should equal to PacketLength in non-fragment case
916 u16 fragoffset
; // Data offset for this fragment
918 bool bisrxaggrsubframe
;
919 bool bPacketBeacon
; //cosa add for rssi
920 bool bToSelfBA
; //cosa add for rssi
921 char cck_adc_pwdb
[4]; //cosa add for rx path selection
927 /* IEEE 802.11 requires that STA supports concurrent reception of at least
928 * three fragmented frames. This define can be increased to support more
929 * concurrent frames, but it should be noted that each entry can consume about
930 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
931 #define IEEE80211_FRAG_CACHE_LEN 4
933 struct ieee80211_frag_entry
{
934 unsigned long first_frag_time
;
936 unsigned int last_frag
;
938 u8 src_addr
[ETH_ALEN
];
939 u8 dst_addr
[ETH_ALEN
];
942 struct ieee80211_stats
{
943 unsigned int tx_unicast_frames
;
944 unsigned int tx_multicast_frames
;
945 unsigned int tx_fragments
;
946 unsigned int tx_unicast_octets
;
947 unsigned int tx_multicast_octets
;
948 unsigned int tx_deferred_transmissions
;
949 unsigned int tx_single_retry_frames
;
950 unsigned int tx_multiple_retry_frames
;
951 unsigned int tx_retry_limit_exceeded
;
952 unsigned int tx_discards
;
953 unsigned int rx_unicast_frames
;
954 unsigned int rx_multicast_frames
;
955 unsigned int rx_fragments
;
956 unsigned int rx_unicast_octets
;
957 unsigned int rx_multicast_octets
;
958 unsigned int rx_fcs_errors
;
959 unsigned int rx_discards_no_buffer
;
960 unsigned int tx_discards_wrong_sa
;
961 unsigned int rx_discards_undecryptable
;
962 unsigned int rx_message_in_msg_fragments
;
963 unsigned int rx_message_in_bad_msg_fragments
;
966 struct ieee80211_device
;
968 #include "ieee80211_crypt.h"
970 #define SEC_KEY_1 (1<<0)
971 #define SEC_KEY_2 (1<<1)
972 #define SEC_KEY_3 (1<<2)
973 #define SEC_KEY_4 (1<<3)
974 #define SEC_ACTIVE_KEY (1<<4)
975 #define SEC_AUTH_MODE (1<<5)
976 #define SEC_UNICAST_GROUP (1<<6)
977 #define SEC_LEVEL (1<<7)
978 #define SEC_ENABLED (1<<8)
979 #define SEC_ENCRYPT (1<<9)
981 #define SEC_LEVEL_0 0 /* None */
982 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
983 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
984 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
985 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
987 #define SEC_ALG_NONE 0
988 #define SEC_ALG_WEP 1
989 #define SEC_ALG_TKIP 2
990 #define SEC_ALG_CCMP 3
993 #define WEP_KEY_LEN 13
994 #define SCM_KEY_LEN 32
995 #define SCM_TEMPORAL_KEY_LENGTH 16
997 struct ieee80211_security
{
1002 unicast_uses_group
:1,
1004 u8 key_sizes
[WEP_KEYS
];
1005 u8 keys
[WEP_KEYS
][SCM_KEY_LEN
];
1008 } __attribute__ ((packed
));
1012 802.11 data frame from AP
1013 ,-------------------------------------------------------------------.
1014 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
1015 |------|------|---------|---------|---------|------|---------|------|
1016 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
1017 | | tion | (BSSID) | | | ence | data | |
1018 `-------------------------------------------------------------------'
1019 Total: 28-2340 bytes
1022 /* Management Frame Information Element Types */
1023 enum ieee80211_mfie
{
1025 MFIE_TYPE_RATES
= 1,
1026 MFIE_TYPE_FH_SET
= 2,
1027 MFIE_TYPE_DS_SET
= 3,
1028 MFIE_TYPE_CF_SET
= 4,
1030 MFIE_TYPE_IBSS_SET
= 6,
1031 MFIE_TYPE_COUNTRY
= 7,
1032 MFIE_TYPE_HOP_PARAMS
= 8,
1033 MFIE_TYPE_HOP_TABLE
= 9,
1034 MFIE_TYPE_REQUEST
= 10,
1035 MFIE_TYPE_CHALLENGE
= 16,
1036 MFIE_TYPE_POWER_CONSTRAINT
= 32,
1037 MFIE_TYPE_POWER_CAPABILITY
= 33,
1038 MFIE_TYPE_TPC_REQUEST
= 34,
1039 MFIE_TYPE_TPC_REPORT
= 35,
1040 MFIE_TYPE_SUPP_CHANNELS
= 36,
1042 MFIE_TYPE_MEASURE_REQUEST
= 38,
1043 MFIE_TYPE_MEASURE_REPORT
= 39,
1044 MFIE_TYPE_QUIET
= 40,
1045 MFIE_TYPE_IBSS_DFS
= 41,
1048 MFIE_TYPE_RATES_EX
= 50,
1049 MFIE_TYPE_HT_CAP
= 45,
1050 MFIE_TYPE_HT_INFO
= 61,
1051 MFIE_TYPE_AIRONET
=133,
1052 MFIE_TYPE_GENERIC
= 221,
1053 MFIE_TYPE_QOS_PARAMETER
= 222,
1056 /* Minimal header; can be used for passing 802.11 frames with sufficient
1057 * information to determine what type of underlying data type is actually
1058 * stored in the data. */
1059 struct ieee80211_hdr
{
1063 } __attribute__ ((packed
));
1065 struct ieee80211_hdr_1addr
{
1070 } __attribute__ ((packed
));
1072 struct ieee80211_hdr_2addr
{
1078 } __attribute__ ((packed
));
1080 struct ieee80211_hdr_3addr
{
1088 } __attribute__ ((packed
));
1090 struct ieee80211_hdr_4addr
{
1099 } __attribute__ ((packed
));
1101 struct ieee80211_hdr_3addrqos
{
1110 } __attribute__ ((packed
));
1112 struct ieee80211_hdr_4addrqos
{
1122 } __attribute__ ((packed
));
1124 struct ieee80211_info_element
{
1128 } __attribute__ ((packed
));
1130 struct ieee80211_authentication
{
1131 struct ieee80211_hdr_3addr header
;
1136 struct ieee80211_info_element info_element
[0];
1137 } __attribute__ ((packed
));
1139 struct ieee80211_disassoc
{
1140 struct ieee80211_hdr_3addr header
;
1142 } __attribute__ ((packed
));
1144 struct ieee80211_probe_request
{
1145 struct ieee80211_hdr_3addr header
;
1146 /* SSID, supported rates */
1147 struct ieee80211_info_element info_element
[0];
1148 } __attribute__ ((packed
));
1150 struct ieee80211_probe_response
{
1151 struct ieee80211_hdr_3addr header
;
1153 __le16 beacon_interval
;
1155 /* SSID, supported rates, FH params, DS params,
1156 * CF params, IBSS params, TIM (if beacon), RSN */
1157 struct ieee80211_info_element info_element
[0];
1158 } __attribute__ ((packed
));
1160 /* Alias beacon for probe_response */
1161 #define ieee80211_beacon ieee80211_probe_response
1163 struct ieee80211_assoc_request_frame
{
1164 struct ieee80211_hdr_3addr header
;
1166 __le16 listen_interval
;
1167 /* SSID, supported rates, RSN */
1168 struct ieee80211_info_element info_element
[0];
1169 } __attribute__ ((packed
));
1171 struct ieee80211_reassoc_request_frame
{
1172 struct ieee80211_hdr_3addr header
;
1174 __le16 listen_interval
;
1175 u8 current_ap
[ETH_ALEN
];
1176 /* SSID, supported rates, RSN */
1177 struct ieee80211_info_element info_element
[0];
1178 } __attribute__ ((packed
));
1180 struct ieee80211_assoc_response_frame
{
1181 struct ieee80211_hdr_3addr header
;
1185 struct ieee80211_info_element info_element
[0]; /* supported rates */
1186 } __attribute__ ((packed
));
1188 struct ieee80211_txb
{
1195 __le16 payload_size
;
1196 struct sk_buff
*fragments
[0];
1199 #define MAX_TX_AGG_COUNT 16
1200 struct ieee80211_drv_agg_txb
{
1201 u8 nr_drv_agg_frames
;
1202 struct sk_buff
*tx_agg_frames
[MAX_TX_AGG_COUNT
];
1203 }__attribute__((packed
));
1205 #define MAX_SUBFRAME_COUNT 64
1206 struct ieee80211_rxb
{
1208 struct sk_buff
*subframes
[MAX_SUBFRAME_COUNT
];
1211 }__attribute__((packed
));
1213 typedef union _frameqos
{
1223 }frameqos
,*pframeqos
;
1225 /* SWEEP TABLE ENTRIES NUMBER*/
1226 #define MAX_SWEEP_TAB_ENTRIES 42
1227 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
1228 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
1229 * only use 8, and then use extended rates for the remaining supported
1230 * rates. Other APs, however, stick all of their supported rates on the
1231 * main rates information element... */
1232 #define MAX_RATES_LENGTH ((u8)12)
1233 #define MAX_RATES_EX_LENGTH ((u8)16)
1234 #define MAX_NETWORK_COUNT 128
1236 #define MAX_CHANNEL_NUMBER 161
1237 #define IEEE80211_SOFTMAC_SCAN_TIME 100
1239 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1241 #define CRC_LENGTH 4U
1243 #define MAX_WPA_IE_LEN 64
1245 #define NETWORK_EMPTY_ESSID (1<<0)
1246 #define NETWORK_HAS_OFDM (1<<1)
1247 #define NETWORK_HAS_CCK (1<<2)
1250 #define NETWORK_HAS_QOS_PARAMETERS (1<<3)
1251 #define NETWORK_HAS_QOS_INFORMATION (1<<4)
1252 #define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
1253 NETWORK_HAS_QOS_INFORMATION)
1255 #define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
1256 #define NETWORK_HAS_CSA (1<<6)
1257 #define NETWORK_HAS_QUIET (1<<7)
1258 #define NETWORK_HAS_IBSS_DFS (1<<8)
1259 #define NETWORK_HAS_TPC_REPORT (1<<9)
1261 #define NETWORK_HAS_ERP_VALUE (1<<10)
1263 #define QOS_QUEUE_NUM 4
1264 #define QOS_OUI_LEN 3
1265 #define QOS_OUI_TYPE 2
1266 #define QOS_ELEMENT_ID 221
1267 #define QOS_OUI_INFO_SUB_TYPE 0
1268 #define QOS_OUI_PARAM_SUB_TYPE 1
1269 #define QOS_VERSION_1 1
1270 #define QOS_AIFSN_MIN_VALUE 2
1272 struct ieee80211_qos_information_element
{
1275 u8 qui
[QOS_OUI_LEN
];
1280 } __attribute__ ((packed
));
1282 struct ieee80211_qos_ac_parameter
{
1286 } __attribute__ ((packed
));
1288 struct ieee80211_qos_parameter_info
{
1289 struct ieee80211_qos_information_element info_element
;
1291 struct ieee80211_qos_ac_parameter ac_params_record
[QOS_QUEUE_NUM
];
1292 } __attribute__ ((packed
));
1294 struct ieee80211_qos_parameters
{
1295 __le16 cw_min
[QOS_QUEUE_NUM
];
1296 __le16 cw_max
[QOS_QUEUE_NUM
];
1297 u8 aifs
[QOS_QUEUE_NUM
];
1298 u8 flag
[QOS_QUEUE_NUM
];
1299 __le16 tx_op_limit
[QOS_QUEUE_NUM
];
1300 } __attribute__ ((packed
));
1302 struct ieee80211_qos_data
{
1303 struct ieee80211_qos_parameters parameters
;
1310 struct ieee80211_tim_parameters
{
1313 } __attribute__ ((packed
));
1316 struct ieee80211_wmm_ac_param
{
1317 u8 ac_aci_acm_aifsn
;
1318 u8 ac_ecwmin_ecwmax
;
1322 struct ieee80211_wmm_ts_info
{
1326 } __attribute__ ((packed
));
1328 struct ieee80211_wmm_tspec_elem
{
1329 struct ieee80211_wmm_ts_info ts_info
;
1336 u32 serv_start_time
;
1343 u16 surp_band_allow
;
1345 }__attribute__((packed
));
1352 EAPOL_ENCAP_ASF_ALERT
1355 static const char *eap_types
[] = {
1356 [EAP_PACKET
] = "EAP-Packet",
1357 [EAPOL_START
] = "EAPOL-Start",
1358 [EAPOL_LOGOFF
] = "EAPOL-Logoff",
1359 [EAPOL_KEY
] = "EAPOL-Key",
1360 [EAPOL_ENCAP_ASF_ALERT
] = "EAPOL-Encap-ASF-Alert"
1363 static inline const char *eap_get_type(int type
)
1365 return ((u32
)type
>= ARRAY_SIZE(eap_types
)) ? "Unknown" : eap_types
[type
];
1367 //added by amy for reorder
1368 static inline u8
Frame_QoSTID(u8
* buf
)
1370 struct ieee80211_hdr_3addr
*hdr
;
1372 hdr
= (struct ieee80211_hdr_3addr
*)buf
;
1373 fc
= le16_to_cpu(hdr
->frame_ctl
);
1374 return (u8
)((frameqos
*)(buf
+ (((fc
& IEEE80211_FCTL_TODS
)&&(fc
& IEEE80211_FCTL_FROMDS
))? 30 : 24)))->field
.tid
;
1377 //added by amy for reorder
1385 } __attribute__ ((packed
));
1387 struct ieee80211_softmac_stats
{
1388 unsigned int rx_ass_ok
;
1389 unsigned int rx_ass_err
;
1390 unsigned int rx_probe_rq
;
1391 unsigned int tx_probe_rs
;
1392 unsigned int tx_beacons
;
1393 unsigned int rx_auth_rq
;
1394 unsigned int rx_auth_rs_ok
;
1395 unsigned int rx_auth_rs_err
;
1396 unsigned int tx_auth_rq
;
1397 unsigned int no_auth_rs
;
1398 unsigned int no_ass_rs
;
1399 unsigned int tx_ass_rq
;
1400 unsigned int rx_ass_rq
;
1401 unsigned int tx_probe_rq
;
1402 unsigned int reassoc
;
1403 unsigned int swtxstop
;
1404 unsigned int swtxawake
;
1405 unsigned char CurrentShowTxate
;
1406 unsigned char last_packet_rate
;
1407 unsigned int txretrycount
;
1410 #define BEACON_PROBE_SSID_ID_POSITION 12
1412 struct ieee80211_info_element_hdr
{
1415 } __attribute__ ((packed
));
1418 * These are the data types that can make up management packets
1422 u16 beacon_interval;
1424 u8 current_ap[ETH_ALEN];
1425 u16 listen_interval;
1427 u16 association_id:14, reserved:2;
1428 } __attribute__ ((packed));
1434 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1435 #define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1437 enum {WMM_all_frame
, WMM_two_frame
, WMM_four_frame
, WMM_six_frame
};
1438 #define MAX_SP_Len (WMM_all_frame << 4)
1439 #define IEEE80211_QOS_TID 0x0f
1440 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1442 #define IEEE80211_DTIM_MBCAST 4
1443 #define IEEE80211_DTIM_UCAST 2
1444 #define IEEE80211_DTIM_VALID 1
1445 #define IEEE80211_DTIM_INVALID 0
1447 #define IEEE80211_PS_DISABLED 0
1448 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1449 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1451 //added by David for QoS 2006/6/30
1452 //#define WMM_Hang_8187
1453 #ifdef WMM_Hang_8187
1454 #undef WMM_Hang_8187
1457 #define WME_AC_BK 0x00
1458 #define WME_AC_BE 0x01
1459 #define WME_AC_VI 0x02
1460 #define WME_AC_VO 0x03
1461 #define WME_ACI_MASK 0x03
1462 #define WME_AIFSN_MASK 0x03
1463 #define WME_AC_PRAM_LEN 16
1465 #define MAX_RECEIVE_BUFFER_SIZE 9100
1467 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1468 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
1470 #define UP2AC(up) ( \
1471 ((up) < 1) ? WME_AC_BE : \
1472 ((up) < 3) ? WME_AC_BK : \
1473 ((up) < 4) ? WME_AC_BE : \
1474 ((up) < 6) ? WME_AC_VI : \
1477 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1478 #define AC2UP(_ac) ( \
1479 ((_ac) == WME_AC_VO) ? 6 : \
1480 ((_ac) == WME_AC_VI) ? 5 : \
1481 ((_ac) == WME_AC_BK) ? 1 : \
1484 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
1485 #define ETHERNET_HEADER_SIZE 14 /* length of two Ethernet address plus ether type*/
1487 struct ether_header
{
1488 u8 ether_dhost
[ETHER_ADDR_LEN
];
1489 u8 ether_shost
[ETHER_ADDR_LEN
];
1491 } __attribute__((packed
));
1493 #ifndef ETHERTYPE_PAE
1494 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
1496 #ifndef ETHERTYPE_IP
1497 #define ETHERTYPE_IP 0x0800 /* IP protocol */
1500 typedef struct _bss_ht
{
1504 // HT related elements
1510 HT_SPEC_VER ht_spec_ver
;
1511 //HT_CAPABILITY_ELE bdHTCapEle;
1512 //HT_INFORMATION_ELE bdHTInfoEle;
1515 bool long_slot_time
;
1518 typedef enum _erp_t
{
1519 ERP_NonERPpresent
= 0x01,
1520 ERP_UseProtection
= 0x02,
1521 ERP_BarkerPreambleMode
= 0x04,
1525 struct ieee80211_network
{
1526 /* These entries are used to identify a unique network */
1529 /* Ensure null-terminated for any debug msgs */
1530 u8 ssid
[IW_ESSID_MAX_SIZE
+ 1];
1533 struct ieee80211_qos_data qos_data
;
1535 // Qos related. Added by Annie, 2005-11-01.
1539 //added by amy for LEAP
1540 bool bWithAironetIE
;
1541 bool bCkipSupported
;
1544 // CCXv4 S59, MBSSID.
1548 // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1549 bool bWithCcxVerNum
;
1551 /* These are network statistics */
1552 struct ieee80211_rx_stats stats
;
1554 u8 rates
[MAX_RATES_LENGTH
];
1556 u8 rates_ex
[MAX_RATES_EX_LENGTH
];
1558 unsigned long last_scanned
;
1563 u16 beacon_interval
;
1564 u16 listen_interval
;
1567 u8 wpa_ie
[MAX_WPA_IE_LEN
];
1569 u8 rsn_ie
[MAX_WPA_IE_LEN
];
1572 struct ieee80211_tim_parameters tim
;
1575 u32 last_dtim_sta_time
[2];
1579 struct ieee80211_wmm_ac_param wmm_param
[4];
1582 u8 Turbo_Enable
;//enable turbo mode, added by thomas
1584 #ifdef ENABLE_DOT11D
1586 u8 CountryIeBuf
[MAX_IE_LEN
];
1588 // HT Related, by amy, 2008.04.29
1590 // Add to handle broadcom AP management frame CCK rate.
1591 bool broadcom_cap_exist
;
1592 bool ralink_cap_exist
;
1593 bool atheros_cap_exist
;
1594 bool cisco_cap_exist
;
1595 bool unknown_cap_exist
;
1597 bool berp_info_valid
;
1598 bool buseprotection
;
1599 //put at the end of the structure.
1600 struct list_head list
;
1604 enum ieee80211_state
{
1606 /* the card is not linked at all */
1607 IEEE80211_NOLINK
= 0,
1609 /* IEEE80211_ASSOCIATING* are for BSS client mode
1610 * the driver shall not perform RX filtering unless
1611 * the state is LINKED.
1612 * The driver shall just check for the state LINKED and
1613 * defaults to NOLINK for ALL the other states (including
1617 /* the association procedure will start (wq scheduling)*/
1618 IEEE80211_ASSOCIATING
,
1619 IEEE80211_ASSOCIATING_RETRY
,
1621 /* the association procedure is sending AUTH request*/
1622 IEEE80211_ASSOCIATING_AUTHENTICATING
,
1624 /* the association procedure has successfully authentcated
1625 * and is sending association request
1627 IEEE80211_ASSOCIATING_AUTHENTICATED
,
1629 /* the link is ok. the card associated to a BSS or linked
1630 * to a ibss cell or acting as an AP and creating the bss
1634 /* same as LINKED, but the driver shall apply RX filter
1635 * rules as we are in NO_LINK mode. As the card is still
1636 * logically linked, but it is doing a syncro site survey
1637 * then it will be back to LINKED state.
1639 IEEE80211_LINKED_SCANNING
,
1643 enum ieee80211_state
{
1644 IEEE80211_UNINITIALIZED
= 0,
1645 IEEE80211_INITIALIZED
,
1646 IEEE80211_ASSOCIATING
,
1647 IEEE80211_ASSOCIATED
,
1648 IEEE80211_AUTHENTICATING
,
1649 IEEE80211_AUTHENTICATED
,
1654 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1655 #define DEFAULT_FTS 2346
1657 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1658 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1659 #define CFG_IEEE80211_RTS (1<<2)
1661 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1662 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1663 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1664 IEEE80211_24GHZ_MIN_CHANNEL + 1)
1666 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1667 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1668 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1669 IEEE80211_52GHZ_MIN_CHANNEL + 1)
1671 typedef struct tx_pending_t
{
1673 struct ieee80211_txb
*txb
;
1676 typedef struct _bandwidth_autoswitch
1678 long threshold_20Mhzto40Mhz
;
1679 long threshold_40Mhzto20Mhz
;
1680 bool bforced_tx20Mhz
;
1681 bool bautoswitch_enable
;
1682 }bandwidth_autoswitch
,*pbandwidth_autoswitch
;
1685 //added by amy for order
1687 #define REORDER_WIN_SIZE 128
1688 #define REORDER_ENTRY_NUM 128
1689 typedef struct _RX_REORDER_ENTRY
1691 struct list_head List
;
1693 struct ieee80211_rxb
* prxb
;
1694 } RX_REORDER_ENTRY
, *PRX_REORDER_ENTRY
;
1695 //added by amy for order
1696 typedef enum _Fsync_State
{
1702 // Power save mode configured.
1703 typedef enum _RT_PS_MODE
1705 eActive
, // Active/Continuous access.
1706 eMaxPs
, // Max power save mode.
1707 eFastPs
// Fast power save mode.
1710 typedef enum _IPS_CALLBACK_FUNCION
1712 IPS_CALLBACK_NONE
= 0,
1713 IPS_CALLBACK_MGNT_LINK_REQUEST
= 1,
1714 IPS_CALLBACK_JOIN_REQUEST
= 2,
1715 }IPS_CALLBACK_FUNCION
;
1717 typedef enum _RT_JOIN_ACTION
{
1724 typedef struct _IbssParms
{
1726 }IbssParms
, *PIbssParms
;
1727 #define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
1730 typedef enum _RT_RF_POWER_STATE
1737 typedef struct _RT_POWER_SAVE_CONTROL
1741 // Inactive Power Save(IPS) : Disable RF when disconnected
1744 bool bIPSModeBackup
;
1745 bool bSwRfProcessing
;
1746 RT_RF_POWER_STATE eInactivePowerState
;
1747 struct work_struct InactivePsWorkItem
;
1748 struct timer_list InactivePsTimer
;
1750 // Return point for join action
1751 IPS_CALLBACK_FUNCION ReturnPoint
;
1753 // Recored Parameters for rescheduled JoinRequest
1755 RT_JOIN_ACTION tmpJoinAction
;
1756 struct ieee80211_network tmpBssDesc
;
1758 // Recored Parameters for rescheduled MgntLinkRequest
1760 bool bTmpActiveScan
;
1761 bool bTmpFilterHiddenAP
;
1762 bool bTmpUpdateParms
;
1764 OCTET_STRING tmpSsid2Scan
;
1767 u8 tmpChannelNumber
;
1771 OCTET_STRING tmpSuppRateSet
;
1772 u8 tmpSuppRateBuf
[MAX_NUM_RATES
];
1778 // Leisre Poswer Save : Disable RF if connected but traffic is not busy
1782 }RT_POWER_SAVE_CONTROL
,*PRT_POWER_SAVE_CONTROL
;
1784 typedef u32 RT_RF_CHANGE_SOURCE
;
1785 #define RF_CHANGE_BY_SW BIT31
1786 #define RF_CHANGE_BY_HW BIT30
1787 #define RF_CHANGE_BY_PS BIT29
1788 #define RF_CHANGE_BY_IPS BIT28
1789 #define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1791 #ifdef ENABLE_DOT11D
1794 COUNTRY_CODE_FCC
= 0,
1795 COUNTRY_CODE_IC
= 1,
1796 COUNTRY_CODE_ETSI
= 2,
1797 COUNTRY_CODE_SPAIN
= 3,
1798 COUNTRY_CODE_FRANCE
= 4,
1799 COUNTRY_CODE_MKK
= 5,
1800 COUNTRY_CODE_MKK1
= 6,
1801 COUNTRY_CODE_ISRAEL
= 7,
1804 COUNTRY_CODE_GLOBAL_DOMAIN
1805 }country_code_type_t
;
1808 #define RT_MAX_LD_SLOT_NUM 10
1809 typedef struct _RT_LINK_DETECT_T
{
1811 u32 NumRecvBcnInPeriod
;
1812 u32 NumRecvDataInPeriod
;
1814 u32 RxBcnNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx beacon / CheckForHang_period to determine link status
1815 u32 RxDataNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx data / CheckForHang_period to determine link status
1816 u16 SlotNum
; // number of CheckForHang period to determine link status
1819 u32 NumTxOkInPeriod
;
1820 u32 NumRxOkInPeriod
;
1822 }RT_LINK_DETECT_T
, *PRT_LINK_DETECT_T
;
1825 struct ieee80211_device
{
1826 struct net_device
*dev
;
1827 struct ieee80211_security sec
;
1829 //hw security related
1830 // u8 hwsec_support; //support?
1831 u8 hwsec_active
; //hw security active.
1832 bool is_silent_reset
;
1836 bool bSupportRemoteWakeUp
;
1837 RT_PS_MODE dot11PowerSaveMode
; // Power save mode configured.
1840 RT_RF_POWER_STATE eRFPowerState
;
1841 RT_RF_CHANGE_SOURCE RfOffReason
;
1843 //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1846 PRT_HIGH_THROUGHPUT pHTInfo
;
1847 //struct timer_list SwBwTimer;
1848 // spinlock_t chnlop_spinlock;
1849 spinlock_t bw_spinlock
;
1851 spinlock_t reorder_spinlock
;
1852 // for HT operation rate set. we use this one for HT data rate to seperate different descriptors
1853 //the way fill this is the same as in the IE
1854 u8 Regdot11HTOperationalRateSet
[16]; //use RATR format
1855 u8 dot11HTOperationalRateSet
[16]; //use RATR format
1856 u8 RegHTSuppRateSet
[16];
1857 u8 HTCurrentOperaRate
;
1858 u8 HTHighestOperaRate
;
1859 //wb added for rate operation mode to firmware
1860 u8 bTxDisableRateFallBack
;
1861 u8 bTxUseDriverAssingedRate
;
1862 atomic_t atm_chnlop
;
1864 // u8 HTHighestOperaRate;
1865 // u8 HTCurrentOperaRate;
1867 // 802.11e and WMM Traffic Stream Info (TX)
1868 struct list_head Tx_TS_Admit_List
;
1869 struct list_head Tx_TS_Pending_List
;
1870 struct list_head Tx_TS_Unused_List
;
1871 TX_TS_RECORD TxTsRecord
[TOTAL_TS_NUM
];
1872 // 802.11e and WMM Traffic Stream Info (RX)
1873 struct list_head Rx_TS_Admit_List
;
1874 struct list_head Rx_TS_Pending_List
;
1875 struct list_head Rx_TS_Unused_List
;
1876 RX_TS_RECORD RxTsRecord
[TOTAL_TS_NUM
];
1878 RX_REORDER_ENTRY RxReorderEntry
[128];
1879 struct list_head RxReorder_Unused_List
;
1881 // Qos related. Added by Annie, 2005-11-01.
1882 // PSTA_QOS pStaQos;
1883 u8 ForcedPriority
; // Force per-packet priority 1~7. (default: 0, not to force it.)
1886 /* Bookkeeping structures */
1887 struct net_device_stats stats
;
1888 struct ieee80211_stats ieee_stats
;
1889 struct ieee80211_softmac_stats softmac_stats
;
1891 /* Probe / Beacon management */
1892 struct list_head network_free_list
;
1893 struct list_head network_list
;
1894 struct ieee80211_network
*networks
;
1898 int iw_mode
; /* operating mode (IW_MODE_*) */
1899 struct iw_spy_data spy_data
;
1902 spinlock_t wpax_suitlist_lock
;
1904 int tx_headroom
; /* Set to size of any additional room needed at front
1905 * of allocated Tx SKBs */
1908 /* WEP and other encryption related settings at the device level */
1909 int open_wep
; /* Set to 1 to allow unencrypted frames */
1911 int reset_on_keychange
; /* Set to 1 if the HW needs to be reset on
1912 * WEP key changes */
1914 /* If the host performs {en,de}cryption, then set to 1 */
1916 int host_encrypt_msdu
;
1918 /* host performs multicast decryption */
1919 int host_mc_decrypt
;
1921 /* host should strip IV and ICV from protected frames */
1922 /* meaningful only when hardware decryption is being used */
1923 int host_strip_iv_icv
;
1927 int ieee802_1x
; /* is IEEE 802.1X used */
1930 bool bHalfWirelessN24GMode
;
1932 int drop_unencrypted
;
1933 int tkip_countermeasures
;
1934 int privacy_invoked
;
1938 u16 pairwise_key_type
;
1940 struct list_head crypt_deinit_list
;
1941 struct ieee80211_crypt_data
*crypt
[WEP_KEYS
];
1942 int tx_keyidx
; /* default TX key index (crypt[tx_keyidx]) */
1943 struct timer_list crypt_deinit_timer
;
1946 int bcrx_sta_key
; /* use individual keys to override default keys even
1947 * with RX of broad/multicast frames */
1949 /* Fragmentation structures */
1950 // each streaming contain a entry
1951 struct ieee80211_frag_entry frag_cache
[17][IEEE80211_FRAG_CACHE_LEN
];
1952 unsigned int frag_next_idx
[17];
1953 u16 fts
; /* Fragmentation Threshold */
1954 #define DEFAULT_RTS_THRESHOLD 2346U
1955 #define MIN_RTS_THRESHOLD 1
1956 #define MAX_RTS_THRESHOLD 2346U
1957 u16 rts
; /* RTS threshold */
1959 /* Association info */
1962 /* This stores infos for the current network.
1963 * Either the network we are associated in INFRASTRUCTURE
1964 * or the network that we are creating in MASTER mode.
1965 * ad-hoc is a mixture ;-).
1966 * Note that in infrastructure mode, even when not associated,
1967 * fields bssid and essid may be valid (if wpa_set and essid_set
1968 * are true) as thy carry the value set by the user via iwconfig
1970 struct ieee80211_network current_network
;
1972 enum ieee80211_state state
;
1976 int mode
; /* A, B, G */
1977 int modulation
; /* CCK, OFDM */
1978 int freq_band
; /* 2.4Ghz, 5.2Ghz, Mixed */
1979 int abg_true
; /* ABG flag */
1981 /* used for forcing the ibss workqueue to terminate
1982 * without wait for the syncro scan to terminate
1984 short sync_scan_hurryup
;
1989 u16 prev_seq_ctl
; /* used to drop duplicate frames */
1991 /* map of allowed channels. 0 is dummy */
1992 // FIXME: remeber to default to a basic channel plan depending of the PHY type
1993 #ifdef ENABLE_DOT11D
1997 int channel_map
[MAX_CHANNEL_NUMBER
+1];
1999 int rate
; /* current rate */
2001 //FIXME: pleace callback, see if redundant with softmac_features
2004 /* this contains flags for selectively enable softmac support */
2005 u16 softmac_features
;
2007 /* if the sequence control field is not filled by HW */
2010 /* association procedure transaction sequence number */
2013 /* AID for RTXed association responses */
2016 /* power save mode related*/
2022 struct tasklet_struct ps_task
;
2027 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2030 short proto_started
;
2032 struct semaphore wx_sem
;
2033 struct semaphore scan_sem
;
2035 spinlock_t mgmt_tx_lock
;
2036 spinlock_t beacon_lock
;
2043 u8 wpax_type_set
; //{added by David, 2006.9.28}
2044 u32 wpax_type_notify
; //{added by David, 2006.9.26}
2046 /* QoS related flag */
2047 char init_wmmparam_flag
;
2048 /* set on initialization */
2051 /* for discarding duplicated packets in IBSS */
2052 struct list_head ibss_mac_hash
[IEEE_IBSS_MAC_HASH_SIZE
];
2054 /* for discarding duplicated packets in BSS */
2055 u16 last_rxseq_num
[17]; /* rx seq previous per-tid */
2056 u16 last_rxfrag_num
[17];/* tx frag previous per-tid */
2057 unsigned long last_packet_time
[17];
2060 unsigned long last_rx_ps_time
;
2062 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
2063 struct sk_buff
*mgmt_queue_ring
[MGMT_QUEUE_NUM
];
2064 int mgmt_queue_head
;
2065 int mgmt_queue_tail
;
2066 //{ added for rtl819x
2067 #define IEEE80211_QUEUE_LIMIT 128
2069 unsigned int hw_header
;
2070 struct sk_buff_head skb_waitQ
[MAX_QUEUE_SIZE
];
2071 struct sk_buff_head skb_aggQ
[MAX_QUEUE_SIZE
];
2072 struct sk_buff_head skb_drv_aggQ
[MAX_QUEUE_SIZE
];
2073 u32 sta_edca_param
[4];
2075 // Enable/Disable Rx immediate BA capability.
2076 bool enable_rx_imm_BA
;
2077 bool bibsscoordinator
;
2079 //+by amy for DM ,080515
2080 //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
2081 bool bdynamic_txpower_enable
;
2083 bool bCTSToSelfEnable
;
2086 u32 fsync_time_interval
;
2087 u32 fsync_rate_bitmap
;
2088 u8 fsync_rssi_threshold
;
2091 u8 fsync_multiple_timeinterval
; // FsyncMultipleTimeInterval * FsyncTimeInterval
2092 u32 fsync_firstdiff_ratethreshold
; // low threshold
2093 u32 fsync_seconddiff_ratethreshold
; // decrease threshold
2094 Fsync_State fsync_state
;
2095 bool bis_any_nonbepkts
;
2096 //20Mhz 40Mhz AutoSwitch Threshold
2097 bandwidth_autoswitch bandwidth_auto_switch
;
2098 //for txpower tracking
2101 //added by amy for AP roaming
2102 RT_LINK_DETECT_T LinkDetectInfo
;
2103 //added by amy for ps
2104 RT_POWER_SAVE_CONTROL PowerSaveControl
;
2106 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2107 struct tx_pending_t tx_pending
;
2109 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
2110 struct timer_list associate_timer
;
2112 /* used if IEEE_SOFTMAC_BEACONS is set */
2113 struct timer_list beacon_timer
;
2115 struct work_struct associate_complete_wq
;
2116 struct work_struct associate_procedure_wq
;
2117 struct delayed_work softmac_scan_wq
;
2118 struct delayed_work associate_retry_wq
;
2119 struct delayed_work start_ibss_wq
;
2120 struct delayed_work hw_wakeup_wq
;
2121 struct delayed_work hw_sleep_wq
;
2122 struct work_struct wx_sync_scan_wq
;
2123 struct workqueue_struct
*wq
;
2124 // Qos related. Added by Annie, 2005-11-01.
2127 //u32 STA_EDCA_PARAM[4];
2128 //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
2131 /* Callback functions */
2132 void (*set_security
)(struct net_device
*dev
,
2133 struct ieee80211_security
*sec
);
2135 /* Used to TX data frame by using txb structs.
2136 * this is not used if in the softmac_features
2137 * is set the flag IEEE_SOFTMAC_TX_QUEUE
2139 int (*hard_start_xmit
)(struct ieee80211_txb
*txb
,
2140 struct net_device
*dev
);
2142 int (*reset_port
)(struct net_device
*dev
);
2143 int (*is_queue_full
) (struct net_device
* dev
, int pri
);
2145 int (*handle_management
) (struct net_device
* dev
,
2146 struct ieee80211_network
* network
, u16 type
);
2147 int (*is_qos_active
) (struct net_device
*dev
, struct sk_buff
*skb
);
2149 /* Softmac-generated frames (mamagement) are TXed via this
2150 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
2151 * not set. As some cards may have different HW queues that
2152 * one might want to use for data and management frames
2153 * the option to have two callbacks might be useful.
2154 * This fucntion can't sleep.
2156 int (*softmac_hard_start_xmit
)(struct sk_buff
*skb
,
2157 struct net_device
*dev
);
2159 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
2160 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
2161 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
2162 * then also management frames are sent via this callback.
2163 * This function can't sleep.
2165 void (*softmac_data_hard_start_xmit
)(struct sk_buff
*skb
,
2166 struct net_device
*dev
,int rate
);
2168 /* stops the HW queue for DATA frames. Useful to avoid
2169 * waste time to TX data frame when we are reassociating
2170 * This function can sleep.
2172 void (*data_hard_stop
)(struct net_device
*dev
);
2174 /* OK this is complementar to data_poll_hard_stop */
2175 void (*data_hard_resume
)(struct net_device
*dev
);
2177 /* ask to the driver to retune the radio .
2178 * This function can sleep. the driver should ensure
2179 * the radio has been swithced before return.
2181 void (*set_chan
)(struct net_device
*dev
,short ch
);
2183 /* These are not used if the ieee stack takes care of
2184 * scanning (IEEE_SOFTMAC_SCAN feature set).
2185 * In this case only the set_chan is used.
2187 * The syncro version is similar to the start_scan but
2188 * does not return until all channels has been scanned.
2189 * this is called in user context and should sleep,
2190 * it is called in a work_queue when swithcing to ad-hoc mode
2191 * or in behalf of iwlist scan when the card is associated
2192 * and root user ask for a scan.
2193 * the fucntion stop_scan should stop both the syncro and
2194 * background scanning and can sleep.
2195 * The fucntion start_scan should initiate the background
2196 * scanning and can't sleep.
2198 void (*scan_syncro
)(struct net_device
*dev
);
2199 void (*start_scan
)(struct net_device
*dev
);
2200 void (*stop_scan
)(struct net_device
*dev
);
2202 /* indicate the driver that the link state is changed
2203 * for example it may indicate the card is associated now.
2204 * Driver might be interested in this to apply RX filter
2205 * rules or simply light the LINK led
2207 void (*link_change
)(struct net_device
*dev
);
2209 /* these two function indicates to the HW when to start
2210 * and stop to send beacons. This is used when the
2211 * IEEE_SOFTMAC_BEACONS is not set. For now the
2212 * stop_send_bacons is NOT guaranteed to be called only
2213 * after start_send_beacons.
2215 void (*start_send_beacons
) (struct net_device
*dev
);
2216 void (*stop_send_beacons
) (struct net_device
*dev
);
2218 /* power save mode related */
2219 void (*sta_wake_up
) (struct net_device
*dev
);
2220 // void (*ps_request_tx_ack) (struct net_device *dev);
2221 void (*enter_sleep_state
) (struct net_device
*dev
, u32 th
, u32 tl
);
2222 short (*ps_is_queue_empty
) (struct net_device
*dev
);
2224 /* Typical STA methods */
2225 int (*handle_auth
) (struct net_device
* dev
,
2226 struct ieee80211_auth
* auth
);
2227 int (*handle_deauth
) (struct net_device
* dev
,
2228 struct ieee80211_deauth
* auth
);
2229 int (*handle_action
) (struct net_device
* dev
,
2230 struct ieee80211_action
* action
,
2231 struct ieee80211_rx_stats
* stats
);
2232 int (*handle_disassoc
) (struct net_device
* dev
,
2233 struct ieee80211_disassoc
* assoc
);
2235 int (*handle_beacon
) (struct net_device
* dev
, struct ieee80211_beacon
* beacon
, struct ieee80211_network
* network
);
2237 int (*handle_probe_response
) (struct net_device
* dev
,
2238 struct ieee80211_probe_response
* resp
,
2239 struct ieee80211_network
* network
);
2240 int (*handle_probe_request
) (struct net_device
* dev
,
2241 struct ieee80211_probe_request
* req
,
2242 struct ieee80211_rx_stats
* stats
);
2244 int (*handle_assoc_response
) (struct net_device
* dev
, struct ieee80211_assoc_response_frame
* resp
, struct ieee80211_network
* network
);
2247 /* Typical AP methods */
2248 int (*handle_assoc_request
) (struct net_device
* dev
);
2249 int (*handle_reassoc_request
) (struct net_device
* dev
,
2250 struct ieee80211_reassoc_request
* req
);
2253 /* check whether Tx hw resouce available */
2254 short (*check_nic_enough_desc
)(struct net_device
*dev
, int queue_index
);
2255 //added by wb for HT related
2256 // void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2257 void (*SetBWModeHandler
)(struct net_device
*dev
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2258 // void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2259 bool (*GetNmodeSupportBySecCfg
)(struct net_device
* dev
);
2260 void (*SetWirelessMode
)(struct net_device
* dev
, u8 wireless_mode
);
2261 bool (*GetHalfNmodeSupportByAPsHandler
)(struct net_device
* dev
);
2262 void (*InitialGainHandler
)(struct net_device
*dev
, u8 Operation
);
2264 /* This must be the last item so that it points to the data
2265 * allocated beyond this structure by alloc_ieee80211 */
2269 #define IEEE_A (1<<0)
2270 #define IEEE_B (1<<1)
2271 #define IEEE_G (1<<2)
2272 #define IEEE_N_24G (1<<4)
2273 #define IEEE_N_5G (1<<5)
2274 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
2276 /* Generate a 802.11 header */
2278 /* Uses the channel change callback directly
2279 * instead of [start/stop] scan callbacks
2281 #define IEEE_SOFTMAC_SCAN (1<<2)
2283 /* Perform authentication and association handshake */
2284 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2286 /* Generate probe requests */
2287 #define IEEE_SOFTMAC_PROBERQ (1<<4)
2289 /* Generate respones to probe requests */
2290 #define IEEE_SOFTMAC_PROBERS (1<<5)
2292 /* The ieee802.11 stack will manages the netif queue
2293 * wake/stop for the driver, taking care of 802.11
2294 * fragmentation. See softmac.c for details. */
2295 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2297 /* Uses only the softmac_data_hard_start_xmit
2298 * even for TX management frames.
2300 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2302 /* Generate beacons. The stack will enqueue beacons
2305 #define IEEE_SOFTMAC_BEACONS (1<<6)
2307 static inline void *ieee80211_priv(struct net_device
*dev
)
2309 return ((struct ieee80211_device
*)netdev_priv(dev
))->priv
;
2312 extern inline int ieee80211_is_empty_essid(const char *essid
, int essid_len
)
2314 /* Single white space is for Linksys APs */
2315 if (essid_len
== 1 && essid
[0] == ' ')
2318 /* Otherwise, if the entire essid is 0, we assume it is hidden */
2321 if (essid
[essid_len
] != '\0')
2328 extern inline int ieee80211_is_valid_mode(struct ieee80211_device
*ieee
, int mode
)
2331 * It is possible for both access points and our device to support
2332 * combinations of modes, so as long as there is one valid combination
2333 * of ap/device supported modes, then return success
2336 if ((mode
& IEEE_A
) &&
2337 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2338 (ieee
->freq_band
& IEEE80211_52GHZ_BAND
))
2341 if ((mode
& IEEE_G
) &&
2342 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2343 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2346 if ((mode
& IEEE_B
) &&
2347 (ieee
->modulation
& IEEE80211_CCK_MODULATION
) &&
2348 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2354 extern inline int ieee80211_get_hdrlen(u16 fc
)
2356 int hdrlen
= IEEE80211_3ADDR_LEN
;
2358 switch (WLAN_FC_GET_TYPE(fc
)) {
2359 case IEEE80211_FTYPE_DATA
:
2360 if ((fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
))
2361 hdrlen
= IEEE80211_4ADDR_LEN
; /* Addr4 */
2362 if(IEEE80211_QOS_HAS_SEQ(fc
))
2363 hdrlen
+= 2; /* QOS ctrl*/
2365 case IEEE80211_FTYPE_CTL
:
2366 switch (WLAN_FC_GET_STYPE(fc
)) {
2367 case IEEE80211_STYPE_CTS
:
2368 case IEEE80211_STYPE_ACK
:
2369 hdrlen
= IEEE80211_1ADDR_LEN
;
2372 hdrlen
= IEEE80211_2ADDR_LEN
;
2381 static inline u8
*ieee80211_get_payload(struct ieee80211_hdr
*hdr
)
2383 switch (ieee80211_get_hdrlen(le16_to_cpu(hdr
->frame_ctl
))) {
2384 case IEEE80211_1ADDR_LEN
:
2385 return ((struct ieee80211_hdr_1addr
*)hdr
)->payload
;
2386 case IEEE80211_2ADDR_LEN
:
2387 return ((struct ieee80211_hdr_2addr
*)hdr
)->payload
;
2388 case IEEE80211_3ADDR_LEN
:
2389 return ((struct ieee80211_hdr_3addr
*)hdr
)->payload
;
2390 case IEEE80211_4ADDR_LEN
:
2391 return ((struct ieee80211_hdr_4addr
*)hdr
)->payload
;
2396 static inline int ieee80211_is_ofdm_rate(u8 rate
)
2398 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2399 case IEEE80211_OFDM_RATE_6MB
:
2400 case IEEE80211_OFDM_RATE_9MB
:
2401 case IEEE80211_OFDM_RATE_12MB
:
2402 case IEEE80211_OFDM_RATE_18MB
:
2403 case IEEE80211_OFDM_RATE_24MB
:
2404 case IEEE80211_OFDM_RATE_36MB
:
2405 case IEEE80211_OFDM_RATE_48MB
:
2406 case IEEE80211_OFDM_RATE_54MB
:
2412 static inline int ieee80211_is_cck_rate(u8 rate
)
2414 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2415 case IEEE80211_CCK_RATE_1MB
:
2416 case IEEE80211_CCK_RATE_2MB
:
2417 case IEEE80211_CCK_RATE_5MB
:
2418 case IEEE80211_CCK_RATE_11MB
:
2426 extern void free_ieee80211(struct net_device
*dev
);
2427 extern struct net_device
*alloc_ieee80211(int sizeof_priv
);
2429 extern int ieee80211_set_encryption(struct ieee80211_device
*ieee
);
2431 /* ieee80211_tx.c */
2433 extern int ieee80211_encrypt_fragment(
2434 struct ieee80211_device
*ieee
,
2435 struct sk_buff
*frag
,
2438 extern int ieee80211_xmit(struct sk_buff
*skb
,
2439 struct net_device
*dev
);
2440 extern void ieee80211_txb_free(struct ieee80211_txb
*);
2443 /* ieee80211_rx.c */
2444 extern int ieee80211_rx(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2445 struct ieee80211_rx_stats
*rx_stats
);
2446 extern void ieee80211_rx_mgt(struct ieee80211_device
*ieee
,
2447 struct ieee80211_hdr_4addr
*header
,
2448 struct ieee80211_rx_stats
*stats
);
2450 /* ieee80211_wx.c */
2451 extern int ieee80211_wx_get_scan(struct ieee80211_device
*ieee
,
2452 struct iw_request_info
*info
,
2453 union iwreq_data
*wrqu
, char *key
);
2454 extern int ieee80211_wx_set_encode(struct ieee80211_device
*ieee
,
2455 struct iw_request_info
*info
,
2456 union iwreq_data
*wrqu
, char *key
);
2457 extern int ieee80211_wx_get_encode(struct ieee80211_device
*ieee
,
2458 struct iw_request_info
*info
,
2459 union iwreq_data
*wrqu
, char *key
);
2460 #if WIRELESS_EXT >= 18
2461 extern int ieee80211_wx_get_encode_ext(struct ieee80211_device
*ieee
,
2462 struct iw_request_info
*info
,
2463 union iwreq_data
* wrqu
, char *extra
);
2464 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device
*ieee
,
2465 struct iw_request_info
*info
,
2466 union iwreq_data
* wrqu
, char *extra
);
2467 extern int ieee80211_wx_set_auth(struct ieee80211_device
*ieee
,
2468 struct iw_request_info
*info
,
2469 struct iw_param
*data
, char *extra
);
2470 extern int ieee80211_wx_set_mlme(struct ieee80211_device
*ieee
,
2471 struct iw_request_info
*info
,
2472 union iwreq_data
*wrqu
, char *extra
);
2474 extern int ieee80211_wx_set_gen_ie(struct ieee80211_device
*ieee
, u8
*ie
, size_t len
);
2476 /* ieee80211_softmac.c */
2477 extern short ieee80211_is_54g(struct ieee80211_network net
);
2478 extern short ieee80211_is_shortslot(struct ieee80211_network net
);
2479 extern int ieee80211_rx_frame_softmac(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2480 struct ieee80211_rx_stats
*rx_stats
, u16 type
,
2482 extern void ieee80211_softmac_new_net(struct ieee80211_device
*ieee
, struct ieee80211_network
*net
);
2484 void SendDisassociation(struct ieee80211_device
*ieee
, u8
* asSta
, u8 asRsn
);
2485 extern void ieee80211_softmac_xmit(struct ieee80211_txb
*txb
, struct ieee80211_device
*ieee
);
2487 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2488 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2489 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device
*ieee
);
2490 extern void ieee80211_start_bss(struct ieee80211_device
*ieee
);
2491 extern void ieee80211_start_master_bss(struct ieee80211_device
*ieee
);
2492 extern void ieee80211_start_ibss(struct ieee80211_device
*ieee
);
2493 extern void ieee80211_softmac_init(struct ieee80211_device
*ieee
);
2494 extern void ieee80211_softmac_free(struct ieee80211_device
*ieee
);
2495 extern void ieee80211_associate_abort(struct ieee80211_device
*ieee
);
2496 extern void ieee80211_disassociate(struct ieee80211_device
*ieee
);
2497 extern void ieee80211_stop_scan(struct ieee80211_device
*ieee
);
2498 extern void ieee80211_start_scan_syncro(struct ieee80211_device
*ieee
);
2499 extern void ieee80211_check_all_nets(struct ieee80211_device
*ieee
);
2500 extern void ieee80211_start_protocol(struct ieee80211_device
*ieee
);
2501 extern void ieee80211_stop_protocol(struct ieee80211_device
*ieee
);
2502 extern void ieee80211_softmac_start_protocol(struct ieee80211_device
*ieee
);
2503 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device
*ieee
);
2504 extern void ieee80211_reset_queue(struct ieee80211_device
*ieee
);
2505 extern void ieee80211_wake_queue(struct ieee80211_device
*ieee
);
2506 extern void ieee80211_stop_queue(struct ieee80211_device
*ieee
);
2507 extern struct sk_buff
*ieee80211_get_beacon(struct ieee80211_device
*ieee
);
2508 extern void ieee80211_start_send_beacons(struct ieee80211_device
*ieee
);
2509 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2510 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device
*ieee
, struct iw_point
*p
);
2511 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2512 extern void ieee80211_ps_tx_ack(struct ieee80211_device
*ieee
, short success
);
2514 extern void softmac_mgmt_xmit(struct sk_buff
*skb
, struct ieee80211_device
*ieee
);
2516 /* ieee80211_crypt_ccmp&tkip&wep.c */
2517 extern void ieee80211_tkip_null(void);
2518 extern void ieee80211_wep_null(void);
2519 extern void ieee80211_ccmp_null(void);
2521 /* ieee80211_softmac_wx.c */
2523 extern int ieee80211_wx_get_wap(struct ieee80211_device
*ieee
,
2524 struct iw_request_info
*info
,
2525 union iwreq_data
*wrqu
, char *ext
);
2527 extern int ieee80211_wx_set_wap(struct ieee80211_device
*ieee
,
2528 struct iw_request_info
*info
,
2529 union iwreq_data
*awrq
,
2532 extern int ieee80211_wx_get_essid(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,union iwreq_data
*wrqu
,char *b
);
2534 extern int ieee80211_wx_set_rate(struct ieee80211_device
*ieee
,
2535 struct iw_request_info
*info
,
2536 union iwreq_data
*wrqu
, char *extra
);
2538 extern int ieee80211_wx_get_rate(struct ieee80211_device
*ieee
,
2539 struct iw_request_info
*info
,
2540 union iwreq_data
*wrqu
, char *extra
);
2542 extern int ieee80211_wx_set_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2543 union iwreq_data
*wrqu
, char *b
);
2545 extern int ieee80211_wx_set_scan(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2546 union iwreq_data
*wrqu
, char *b
);
2548 extern int ieee80211_wx_set_essid(struct ieee80211_device
*ieee
,
2549 struct iw_request_info
*a
,
2550 union iwreq_data
*wrqu
, char *extra
);
2552 extern int ieee80211_wx_get_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2553 union iwreq_data
*wrqu
, char *b
);
2555 extern int ieee80211_wx_set_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2556 union iwreq_data
*wrqu
, char *b
);
2558 extern int ieee80211_wx_get_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2559 union iwreq_data
*wrqu
, char *b
);
2561 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2562 extern void ieee80211_wx_sync_scan_wq(struct work_struct
*work
);
2565 extern int ieee80211_wx_set_rawtx(struct ieee80211_device
*ieee
,
2566 struct iw_request_info
*info
,
2567 union iwreq_data
*wrqu
, char *extra
);
2569 extern int ieee80211_wx_get_name(struct ieee80211_device
*ieee
,
2570 struct iw_request_info
*info
,
2571 union iwreq_data
*wrqu
, char *extra
);
2573 extern int ieee80211_wx_set_power(struct ieee80211_device
*ieee
,
2574 struct iw_request_info
*info
,
2575 union iwreq_data
*wrqu
, char *extra
);
2577 extern int ieee80211_wx_get_power(struct ieee80211_device
*ieee
,
2578 struct iw_request_info
*info
,
2579 union iwreq_data
*wrqu
, char *extra
);
2581 extern int ieee80211_wx_set_rts(struct ieee80211_device
*ieee
,
2582 struct iw_request_info
*info
,
2583 union iwreq_data
*wrqu
, char *extra
);
2585 extern int ieee80211_wx_get_rts(struct ieee80211_device
*ieee
,
2586 struct iw_request_info
*info
,
2587 union iwreq_data
*wrqu
, char *extra
);
2589 #define MAX_RECEIVE_BUFFER_SIZE 9100 //
2590 extern void HTDebugHTCapability(u8
* CapIE
, u8
* TitleString
);
2591 extern void HTDebugHTInfo(u8
* InfoIE
, u8
* TitleString
);
2593 void HTSetConnectBwMode(struct ieee80211_device
* ieee
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2594 extern void HTUpdateDefaultSetting(struct ieee80211_device
* ieee
);
2595 extern void HTConstructCapabilityElement(struct ieee80211_device
* ieee
, u8
* posHTCap
, u8
* len
, u8 isEncrypt
);
2596 extern void HTConstructInfoElement(struct ieee80211_device
* ieee
, u8
* posHTInfo
, u8
* len
, u8 isEncrypt
);
2597 extern void HTConstructRT2RTAggElement(struct ieee80211_device
* ieee
, u8
* posRT2RTAgg
, u8
* len
);
2598 extern void HTOnAssocRsp(struct ieee80211_device
*ieee
);
2599 extern void HTInitializeHTInfo(struct ieee80211_device
* ieee
);
2600 extern void HTInitializeBssDesc(PBSS_HT pBssHT
);
2601 extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2602 extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2603 extern u8
HTGetHighestMCSRate(struct ieee80211_device
* ieee
, u8
* pMCSRateSet
, u8
* pMCSFilter
);
2604 extern u8 MCS_FILTER_ALL
[];
2605 extern u16 MCS_DATA_RATE
[2][2][77] ;
2606 extern u8
HTCCheck(struct ieee80211_device
* ieee
, u8
* pFrame
);
2607 //extern void HTSetConnectBwModeCallback(unsigned long data);
2608 extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo
);
2609 extern bool IsHTHalfNmodeAPs(struct ieee80211_device
* ieee
);
2610 extern u16
HTHalfMcsToDataRate(struct ieee80211_device
* ieee
, u8 nMcsRate
);
2611 extern u16
HTMcsToDataRate( struct ieee80211_device
* ieee
, u8 nMcsRate
);
2612 extern u16
TxCountToDataRate( struct ieee80211_device
* ieee
, u8 nDataRate
);
2613 //function in BAPROC.c
2614 extern int ieee80211_rx_ADDBAReq( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2615 extern int ieee80211_rx_ADDBARsp( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2616 extern int ieee80211_rx_DELBA(struct ieee80211_device
* ieee
,struct sk_buff
*skb
);
2617 extern void TsInitAddBA( struct ieee80211_device
* ieee
, PTX_TS_RECORD pTS
, u8 Policy
, u8 bOverwritePending
);
2618 extern void TsInitDelBA( struct ieee80211_device
* ieee
, PTS_COMMON_INFO pTsCommonInfo
, TR_SELECT TxRxSelect
);
2619 extern void BaSetupTimeOut(unsigned long data
);
2620 extern void TxBaInactTimeout(unsigned long data
);
2621 extern void RxBaInactTimeout(unsigned long data
);
2622 extern void ResetBaEntry( PBA_RECORD pBA
);
2625 struct ieee80211_device
* ieee
,
2626 PTS_COMMON_INFO
*ppTS
,
2629 TR_SELECT TxRxSelect
, //Rx:1, Tx:0
2632 extern void TSInitialize(struct ieee80211_device
*ieee
);
2633 extern void TsStartAddBaProcess(struct ieee80211_device
* ieee
, PTX_TS_RECORD pTxTS
);
2634 extern void RemovePeerTS(struct ieee80211_device
* ieee
, u8
* Addr
);
2635 extern void RemoveAllTS(struct ieee80211_device
* ieee
);
2636 void ieee80211_softmac_scan_syncro(struct ieee80211_device
*ieee
);
2638 extern const long ieee80211_wlan_frequencies
[];
2640 extern inline void ieee80211_increment_scans(struct ieee80211_device
*ieee
)
2645 extern inline int ieee80211_get_scans(struct ieee80211_device
*ieee
)
2650 static inline const char *escape_essid(const char *essid
, u8 essid_len
) {
2651 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
2652 const char *s
= essid
;
2655 if (ieee80211_is_empty_essid(essid
, essid_len
)) {
2656 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
2660 essid_len
= min(essid_len
, (u8
)IW_ESSID_MAX_SIZE
);
2661 while (essid_len
--) {
2674 /* For the function is more related to hardware setting, it's better to use the
2675 * ieee handler to refer to it.
2677 extern short check_nic_enough_desc(struct net_device
*dev
, int queue_index
);
2678 extern int ieee80211_data_xmit(struct sk_buff
*skb
, struct net_device
*dev
);
2679 extern int ieee80211_parse_info_param(struct ieee80211_device
*ieee
,
2680 struct ieee80211_info_element
*info_element
,
2682 struct ieee80211_network
*network
,
2683 struct ieee80211_rx_stats
*stats
);
2685 void ieee80211_indicate_packets(struct ieee80211_device
*ieee
, struct ieee80211_rxb
** prxbIndicateArray
,u8 index
);
2686 #define RT_ASOC_RETRY_LIMIT 5
2687 #endif /* IEEE80211_H */