?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
On Tue, Nov 06, 2007 at 02:33:53AM -0800, akpm@linux-foundation.org wrote:
[mmotm.git] / drivers / usb / gadget / langwell_udc.c
bloba3913519fd5841cefc0718639af38b2bbf62ae40
1 /*
2 * Intel Langwell USB Device Controller driver
3 * Copyright (C) 2008-2009, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 *
18 */
19
20
21 /* #undef DEBUG */
22 /* #undef VERBOSE */
23
24 #if defined(CONFIG_USB_LANGWELL_OTG)
25 #define OTG_TRANSCEIVER
26 #endif
27
28
29 #include <linux/module.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/kernel.h>
33 #include <linux/delay.h>
34 #include <linux/ioport.h>
35 #include <linux/sched.h>
36 #include <linux/slab.h>
37 #include <linux/errno.h>
38 #include <linux/init.h>
39 #include <linux/timer.h>
40 #include <linux/list.h>
41 #include <linux/interrupt.h>
42 #include <linux/moduleparam.h>
43 #include <linux/device.h>
44 #include <linux/usb/ch9.h>
45 #include <linux/usb/gadget.h>
46 #include <linux/usb/otg.h>
47 #include <linux/pm.h>
48 #include <linux/io.h>
49 #include <linux/irq.h>
50 #include <asm/system.h>
51 #include <asm/unaligned.h>
52
53 #include "langwell_udc.h"
54
55
56 #define DRIVER_DESC "Intel Langwell USB Device Controller driver"
57 #define DRIVER_VERSION "16 May 2009"
58
59 static const char driver_name[] = "langwell_udc";
60 static const char driver_desc[] = DRIVER_DESC;
61
62
63 /* controller device global variable */
64 static struct langwell_udc *the_controller;
65
66 /* for endpoint 0 operations */
67 static const struct usb_endpoint_descriptor
68 langwell_ep0_desc = {
69 .bLength = USB_DT_ENDPOINT_SIZE,
70 .bDescriptorType = USB_DT_ENDPOINT,
71 .bEndpointAddress = 0,
72 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
73 .wMaxPacketSize = EP0_MAX_PKT_SIZE,
74 };
75
76
77 /*-------------------------------------------------------------------------*/
78 /* debugging */
79
80 #ifdef DEBUG
81 #define DBG(dev, fmt, args...) \
82 pr_debug("%s %s: " fmt , driver_name, \
83 pci_name(dev->pdev), ## args)
84 #else
85 #define DBG(dev, fmt, args...) \
86 do { } while (0)
87 #endif /* DEBUG */
88
89
90 #ifdef VERBOSE
91 #define VDBG DBG
92 #else
93 #define VDBG(dev, fmt, args...) \
94 do { } while (0)
95 #endif /* VERBOSE */
96
97
98 #define ERROR(dev, fmt, args...) \
99 pr_err("%s %s: " fmt , driver_name, \
100 pci_name(dev->pdev), ## args)
101
102 #define WARNING(dev, fmt, args...) \
103 pr_warning("%s %s: " fmt , driver_name, \
104 pci_name(dev->pdev), ## args)
105
106 #define INFO(dev, fmt, args...) \
107 pr_info("%s %s: " fmt , driver_name, \
108 pci_name(dev->pdev), ## args)
109
110
111 #ifdef VERBOSE
112 static inline void print_all_registers(struct langwell_udc *dev)
113 {
114 int i;
115
116 /* Capability Registers */
117 printk(KERN_DEBUG "Capability Registers (offset: "
118 "0x%04x, length: 0x%08x)\n",
119 CAP_REG_OFFSET,
120 (u32)sizeof(struct langwell_cap_regs));
121 printk(KERN_DEBUG "caplength=0x%02x\n",
122 readb(&dev->cap_regs->caplength));
123 printk(KERN_DEBUG "hciversion=0x%04x\n",
124 readw(&dev->cap_regs->hciversion));
125 printk(KERN_DEBUG "hcsparams=0x%08x\n",
126 readl(&dev->cap_regs->hcsparams));
127 printk(KERN_DEBUG "hccparams=0x%08x\n",
128 readl(&dev->cap_regs->hccparams));
129 printk(KERN_DEBUG "dciversion=0x%04x\n",
130 readw(&dev->cap_regs->dciversion));
131 printk(KERN_DEBUG "dccparams=0x%08x\n",
132 readl(&dev->cap_regs->dccparams));
133
134 /* Operational Registers */
135 printk(KERN_DEBUG "Operational Registers (offset: "
136 "0x%04x, length: 0x%08x)\n",
137 OP_REG_OFFSET,
138 (u32)sizeof(struct langwell_op_regs));
139 printk(KERN_DEBUG "extsts=0x%08x\n",
140 readl(&dev->op_regs->extsts));
141 printk(KERN_DEBUG "extintr=0x%08x\n",
142 readl(&dev->op_regs->extintr));
143 printk(KERN_DEBUG "usbcmd=0x%08x\n",
144 readl(&dev->op_regs->usbcmd));
145 printk(KERN_DEBUG "usbsts=0x%08x\n",
146 readl(&dev->op_regs->usbsts));
147 printk(KERN_DEBUG "usbintr=0x%08x\n",
148 readl(&dev->op_regs->usbintr));
149 printk(KERN_DEBUG "frindex=0x%08x\n",
150 readl(&dev->op_regs->frindex));
151 printk(KERN_DEBUG "ctrldssegment=0x%08x\n",
152 readl(&dev->op_regs->ctrldssegment));
153 printk(KERN_DEBUG "deviceaddr=0x%08x\n",
154 readl(&dev->op_regs->deviceaddr));
155 printk(KERN_DEBUG "endpointlistaddr=0x%08x\n",
156 readl(&dev->op_regs->endpointlistaddr));
157 printk(KERN_DEBUG "ttctrl=0x%08x\n",
158 readl(&dev->op_regs->ttctrl));
159 printk(KERN_DEBUG "burstsize=0x%08x\n",
160 readl(&dev->op_regs->burstsize));
161 printk(KERN_DEBUG "txfilltuning=0x%08x\n",
162 readl(&dev->op_regs->txfilltuning));
163 printk(KERN_DEBUG "txttfilltuning=0x%08x\n",
164 readl(&dev->op_regs->txttfilltuning));
165 printk(KERN_DEBUG "ic_usb=0x%08x\n",
166 readl(&dev->op_regs->ic_usb));
167 printk(KERN_DEBUG "ulpi_viewport=0x%08x\n",
168 readl(&dev->op_regs->ulpi_viewport));
169 printk(KERN_DEBUG "configflag=0x%08x\n",
170 readl(&dev->op_regs->configflag));
171 printk(KERN_DEBUG "portsc1=0x%08x\n",
172 readl(&dev->op_regs->portsc1));
173 printk(KERN_DEBUG "devlc=0x%08x\n",
174 readl(&dev->op_regs->devlc));
175 printk(KERN_DEBUG "otgsc=0x%08x\n",
176 readl(&dev->op_regs->otgsc));
177 printk(KERN_DEBUG "usbmode=0x%08x\n",
178 readl(&dev->op_regs->usbmode));
179 printk(KERN_DEBUG "endptnak=0x%08x\n",
180 readl(&dev->op_regs->endptnak));
181 printk(KERN_DEBUG "endptnaken=0x%08x\n",
182 readl(&dev->op_regs->endptnaken));
183 printk(KERN_DEBUG "endptsetupstat=0x%08x\n",
184 readl(&dev->op_regs->endptsetupstat));
185 printk(KERN_DEBUG "endptprime=0x%08x\n",
186 readl(&dev->op_regs->endptprime));
187 printk(KERN_DEBUG "endptflush=0x%08x\n",
188 readl(&dev->op_regs->endptflush));
189 printk(KERN_DEBUG "endptstat=0x%08x\n",
190 readl(&dev->op_regs->endptstat));
191 printk(KERN_DEBUG "endptcomplete=0x%08x\n",
192 readl(&dev->op_regs->endptcomplete));
193
194 for (i = 0; i < dev->ep_max / 2; i++) {
195 printk(KERN_DEBUG "endptctrl[%d]=0x%08x\n",
196 i, readl(&dev->op_regs->endptctrl[i]));
197 }
198 }
199 #endif /* VERBOSE */
200
201
202 /*-------------------------------------------------------------------------*/
203
204 #define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
205
206 #define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
207 USB_DIR_IN) : ((ep)->desc->bEndpointAddress \
208 & USB_DIR_IN) == USB_DIR_IN)
209
210
211 #ifdef DEBUG
212 static char *type_string(u8 bmAttributes)
213 {
214 switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
215 case USB_ENDPOINT_XFER_BULK:
216 return "bulk";
217 case USB_ENDPOINT_XFER_ISOC:
218 return "iso";
219 case USB_ENDPOINT_XFER_INT:
220 return "int";
221 };
222
223 return "control";
224 }
225 #endif
226
227
228 /* configure endpoint control registers */
229 static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
230 unsigned char is_in, unsigned char ep_type)
231 {
232 struct langwell_udc *dev;
233 u32 endptctrl;
234
235 dev = ep->dev;
236 VDBG(dev, "---> %s()\n", __func__);
237
238 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
239 if (is_in) { /* TX */
240 if (ep_num)
241 endptctrl |= EPCTRL_TXR;
242 endptctrl |= EPCTRL_TXE;
243 endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
244 } else { /* RX */
245 if (ep_num)
246 endptctrl |= EPCTRL_RXR;
247 endptctrl |= EPCTRL_RXE;
248 endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
249 }
250
251 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
252
253 VDBG(dev, "<--- %s()\n", __func__);
254 }
255
256
257 /* reset ep0 dQH and endptctrl */
258 static void ep0_reset(struct langwell_udc *dev)
259 {
260 struct langwell_ep *ep;
261 int i;
262
263 VDBG(dev, "---> %s()\n", __func__);
264
265 /* ep0 in and out */
266 for (i = 0; i < 2; i++) {
267 ep = &dev->ep[i];
268 ep->dev = dev;
269
270 /* ep0 dQH */
271 ep->dqh = &dev->ep_dqh[i];
272
273 /* configure ep0 endpoint capabilities in dQH */
274 ep->dqh->dqh_ios = 1;
275 ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
276
277 /* FIXME: enable ep0-in HW zero length termination select */
278 if (is_in(ep))
279 ep->dqh->dqh_zlt = 0;
280 ep->dqh->dqh_mult = 0;
281
282 /* configure ep0 control registers */
283 ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
284 }
285
286 VDBG(dev, "<--- %s()\n", __func__);
287 return;
288 }
289
290
291 /*-------------------------------------------------------------------------*/
292
293 /* endpoints operations */
294
295 /* configure endpoint, making it usable */
296 static int langwell_ep_enable(struct usb_ep *_ep,
297 const struct usb_endpoint_descriptor *desc)
298 {
299 struct langwell_udc *dev;
300 struct langwell_ep *ep;
301 u16 max = 0;
302 unsigned long flags;
303 int retval = 0;
304 unsigned char zlt, ios = 0, mult = 0;
305
306 ep = container_of(_ep, struct langwell_ep, ep);
307 dev = ep->dev;
308 VDBG(dev, "---> %s()\n", __func__);
309
310 if (!_ep || !desc || ep->desc
311 || desc->bDescriptorType != USB_DT_ENDPOINT)
312 return -EINVAL;
313
314 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
315 return -ESHUTDOWN;
316
317 max = le16_to_cpu(desc->wMaxPacketSize);
318
319 /*
320 * disable HW zero length termination select
321 * driver handles zero length packet through req->req.zero
322 */
323 zlt = 1;
324
325 /*
326 * sanity check type, direction, address, and then
327 * initialize the endpoint capabilities fields in dQH
328 */
329 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
330 case USB_ENDPOINT_XFER_CONTROL:
331 ios = 1;
332 break;
333 case USB_ENDPOINT_XFER_BULK:
334 if ((dev->gadget.speed == USB_SPEED_HIGH
335 && max != 512)
336 || (dev->gadget.speed == USB_SPEED_FULL
337 && max > 64)) {
338 goto done;
339 }
340 break;
341 case USB_ENDPOINT_XFER_INT:
342 if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
343 goto done;
344
345 switch (dev->gadget.speed) {
346 case USB_SPEED_HIGH:
347 if (max <= 1024)
348 break;
349 case USB_SPEED_FULL:
350 if (max <= 64)
351 break;
352 default:
353 if (max <= 8)
354 break;
355 goto done;
356 }
357 break;
358 case USB_ENDPOINT_XFER_ISOC:
359 if (strstr(ep->ep.name, "-bulk")
360 || strstr(ep->ep.name, "-int"))
361 goto done;
362
363 switch (dev->gadget.speed) {
364 case USB_SPEED_HIGH:
365 if (max <= 1024)
366 break;
367 case USB_SPEED_FULL:
368 if (max <= 1023)
369 break;
370 default:
371 goto done;
372 }
373 /*
374 * FIXME:
375 * calculate transactions needed for high bandwidth iso
376 */
377 mult = (unsigned char)(1 + ((max >> 11) & 0x03));
378 max = max & 0x8ff; /* bit 0~10 */
379 /* 3 transactions at most */
380 if (mult > 3)
381 goto done;
382 break;
383 default:
384 goto done;
385 }
386
387 spin_lock_irqsave(&dev->lock, flags);
388
389 /* configure endpoint capabilities in dQH */
390 ep->dqh->dqh_ios = ios;
391 ep->dqh->dqh_mpl = cpu_to_le16(max);
392 ep->dqh->dqh_zlt = zlt;
393 ep->dqh->dqh_mult = mult;
394
395 ep->ep.maxpacket = max;
396 ep->desc = desc;
397 ep->stopped = 0;
398 ep->ep_num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
399
400 /* ep_type */
401 ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
402
403 /* configure endpoint control registers */
404 ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
405
406 DBG(dev, "enabled %s (ep%d%s-%s), max %04x\n",
407 _ep->name,
408 ep->ep_num,
409 DIR_STRING(desc->bEndpointAddress),
410 type_string(desc->bmAttributes),
411 max);
412
413 spin_unlock_irqrestore(&dev->lock, flags);
414 done:
415 VDBG(dev, "<--- %s()\n", __func__);
416 return retval;
417 }
418
419
420 /*-------------------------------------------------------------------------*/
421
422 /* retire a request */
423 static void done(struct langwell_ep *ep, struct langwell_request *req,
424 int status)
425 {
426 struct langwell_udc *dev = ep->dev;
427 unsigned stopped = ep->stopped;
428 struct langwell_dtd *curr_dtd, *next_dtd;
429 int i;
430
431 VDBG(dev, "---> %s()\n", __func__);
432
433 /* remove the req from ep->queue */
434 list_del_init(&req->queue);
435
436 if (req->req.status == -EINPROGRESS)
437 req->req.status = status;
438 else
439 status = req->req.status;
440
441 /* free dTD for the request */
442 next_dtd = req->head;
443 for (i = 0; i < req->dtd_count; i++) {
444 curr_dtd = next_dtd;
445 if (i != req->dtd_count - 1)
446 next_dtd = curr_dtd->next_dtd_virt;
447 dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
448 }
449
450 if (req->mapped) {
451 dma_unmap_single(&dev->pdev->dev, req->req.dma, req->req.length,
452 is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
453 req->req.dma = DMA_ADDR_INVALID;
454 req->mapped = 0;
455 } else
456 dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
457 req->req.length,
458 is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
459
460 if (status != -ESHUTDOWN)
461 DBG(dev, "complete %s, req %p, stat %d, len %u/%u\n",
462 ep->ep.name, &req->req, status,
463 req->req.actual, req->req.length);
464
465 /* don't modify queue heads during completion callback */
466 ep->stopped = 1;
467
468 spin_unlock(&dev->lock);
469 /* complete routine from gadget driver */
470 if (req->req.complete)
471 req->req.complete(&ep->ep, &req->req);
472
473 spin_lock(&dev->lock);
474 ep->stopped = stopped;
475
476 VDBG(dev, "<--- %s()\n", __func__);
477 }
478
479
480 static void langwell_ep_fifo_flush(struct usb_ep *_ep);
481
482 /* delete all endpoint requests, called with spinlock held */
483 static void nuke(struct langwell_ep *ep, int status)
484 {
485 /* called with spinlock held */
486 ep->stopped = 1;
487
488 /* endpoint fifo flush */
489 if (&ep->ep && ep->desc)
490 langwell_ep_fifo_flush(&ep->ep);
491
492 while (!list_empty(&ep->queue)) {
493 struct langwell_request *req = NULL;
494 req = list_entry(ep->queue.next, struct langwell_request,
495 queue);
496 done(ep, req, status);
497 }
498 }
499
500
501 /*-------------------------------------------------------------------------*/
502
503 /* endpoint is no longer usable */
504 static int langwell_ep_disable(struct usb_ep *_ep)
505 {
506 struct langwell_ep *ep;
507 unsigned long flags;
508 struct langwell_udc *dev;
509 int ep_num;
510 u32 endptctrl;
511
512 ep = container_of(_ep, struct langwell_ep, ep);
513 dev = ep->dev;
514 VDBG(dev, "---> %s()\n", __func__);
515
516 if (!_ep || !ep->desc)
517 return -EINVAL;
518
519 spin_lock_irqsave(&dev->lock, flags);
520
521 /* disable endpoint control register */
522 ep_num = ep->ep_num;
523 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
524 if (is_in(ep))
525 endptctrl &= ~EPCTRL_TXE;
526 else
527 endptctrl &= ~EPCTRL_RXE;
528 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
529
530 /* nuke all pending requests (does flush) */
531 nuke(ep, -ESHUTDOWN);
532
533 ep->desc = NULL;
534 ep->stopped = 1;
535
536 spin_unlock_irqrestore(&dev->lock, flags);
537
538 DBG(dev, "disabled %s\n", _ep->name);
539 VDBG(dev, "<--- %s()\n", __func__);
540
541 return 0;
542 }
543
544
545 /* allocate a request object to use with this endpoint */
546 static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
547 gfp_t gfp_flags)
548 {
549 struct langwell_ep *ep;
550 struct langwell_udc *dev;
551 struct langwell_request *req = NULL;
552
553 if (!_ep)
554 return NULL;
555
556 ep = container_of(_ep, struct langwell_ep, ep);
557 dev = ep->dev;
558 VDBG(dev, "---> %s()\n", __func__);
559
560 req = kzalloc(sizeof(*req), gfp_flags);
561 if (!req)
562 return NULL;
563
564 req->req.dma = DMA_ADDR_INVALID;
565 INIT_LIST_HEAD(&req->queue);
566
567 VDBG(dev, "alloc request for %s\n", _ep->name);
568 VDBG(dev, "<--- %s()\n", __func__);
569 return &req->req;
570 }
571
572
573 /* free a request object */
574 static void langwell_free_request(struct usb_ep *_ep,
575 struct usb_request *_req)
576 {
577 struct langwell_ep *ep;
578 struct langwell_udc *dev;
579 struct langwell_request *req = NULL;
580
581 ep = container_of(_ep, struct langwell_ep, ep);
582 dev = ep->dev;
583 VDBG(dev, "---> %s()\n", __func__);
584
585 if (!_ep || !_req)
586 return;
587
588 req = container_of(_req, struct langwell_request, req);
589 WARN_ON(!list_empty(&req->queue));
590
591 if (_req)
592 kfree(req);
593
594 VDBG(dev, "free request for %s\n", _ep->name);
595 VDBG(dev, "<--- %s()\n", __func__);
596 }
597
598
599 /*-------------------------------------------------------------------------*/
600
601 /* queue dTD and PRIME endpoint */
602 static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
603 {
604 u32 bit_mask, usbcmd, endptstat, dtd_dma;
605 u8 dtd_status;
606 int i;
607 struct langwell_dqh *dqh;
608 struct langwell_udc *dev;
609
610 dev = ep->dev;
611 VDBG(dev, "---> %s()\n", __func__);
612
613 i = ep->ep_num * 2 + is_in(ep);
614 dqh = &dev->ep_dqh[i];
615
616 if (ep->ep_num)
617 VDBG(dev, "%s\n", ep->name);
618 else
619 /* ep0 */
620 VDBG(dev, "%s-%s\n", ep->name, is_in(ep) ? "in" : "out");
621
622 VDBG(dev, "ep_dqh[%d] addr: 0x%08x\n", i, (u32)&(dev->ep_dqh[i]));
623
624 bit_mask = is_in(ep) ?
625 (1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
626
627 VDBG(dev, "bit_mask = 0x%08x\n", bit_mask);
628
629 /* check if the pipe is empty */
630 if (!(list_empty(&ep->queue))) {
631 /* add dTD to the end of linked list */
632 struct langwell_request *lastreq;
633 lastreq = list_entry(ep->queue.prev,
634 struct langwell_request, queue);
635
636 lastreq->tail->dtd_next =
637 cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
638
639 /* read prime bit, if 1 goto out */
640 if (readl(&dev->op_regs->endptprime) & bit_mask)
641 goto out;
642
643 do {
644 /* set ATDTW bit in USBCMD */
645 usbcmd = readl(&dev->op_regs->usbcmd);
646 writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
647
648 /* read correct status bit */
649 endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
650
651 } while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
652
653 /* write ATDTW bit to 0 */
654 usbcmd = readl(&dev->op_regs->usbcmd);
655 writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
656
657 if (endptstat)
658 goto out;
659 }
660
661 /* write dQH next pointer and terminate bit to 0 */
662 dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
663 dqh->dtd_next = cpu_to_le32(dtd_dma);
664
665 /* clear active and halt bit */
666 dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
667 dqh->dtd_status &= dtd_status;
668 VDBG(dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
669
670 /* write 1 to endptprime register to PRIME endpoint */
671 bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
672 VDBG(dev, "endprime bit_mask = 0x%08x\n", bit_mask);
673 writel(bit_mask, &dev->op_regs->endptprime);
674 out:
675 VDBG(dev, "<--- %s()\n", __func__);
676 return 0;
677 }
678
679
680 /* fill in the dTD structure to build a transfer descriptor */
681 static struct langwell_dtd *build_dtd(struct langwell_request *req,
682 unsigned *length, dma_addr_t *dma, int *is_last)
683 {
684 u32 buf_ptr;
685 struct langwell_dtd *dtd;
686 struct langwell_udc *dev;
687 int i;
688
689 dev = req->ep->dev;
690 VDBG(dev, "---> %s()\n", __func__);
691
692 /* the maximum transfer length, up to 16k bytes */
693 *length = min(req->req.length - req->req.actual,
694 (unsigned)DTD_MAX_TRANSFER_LENGTH);
695
696 /* create dTD dma_pool resource */
697 dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
698 if (dtd == NULL)
699 return dtd;
700 dtd->dtd_dma = *dma;
701
702 /* initialize buffer page pointers */
703 buf_ptr = (u32)(req->req.dma + req->req.actual);
704 for (i = 0; i < 5; i++)
705 dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
706
707 req->req.actual += *length;
708
709 /* fill in total bytes with transfer size */
710 dtd->dtd_total = cpu_to_le16(*length);
711 VDBG(dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
712
713 /* set is_last flag if req->req.zero is set or not */
714 if (req->req.zero) {
715 if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
716 *is_last = 1;
717 else
718 *is_last = 0;
719 } else if (req->req.length == req->req.actual) {
720 *is_last = 1;
721 } else
722 *is_last = 0;
723
724 if (*is_last == 0)
725 VDBG(dev, "multi-dtd request!\n");
726
727 /* set interrupt on complete bit for the last dTD */
728 if (*is_last && !req->req.no_interrupt)
729 dtd->dtd_ioc = 1;
730
731 /* set multiplier override 0 for non-ISO and non-TX endpoint */
732 dtd->dtd_multo = 0;
733
734 /* set the active bit of status field to 1 */
735 dtd->dtd_status = DTD_STS_ACTIVE;
736 VDBG(dev, "dtd->dtd_status = 0x%02x\n", dtd->dtd_status);
737
738 VDBG(dev, "length = %d, dma addr= 0x%08x\n", *length, (int)*dma);
739 VDBG(dev, "<--- %s()\n", __func__);
740 return dtd;
741 }
742
743
744 /* generate dTD linked list for a request */
745 static int req_to_dtd(struct langwell_request *req)
746 {
747 unsigned count;
748 int is_last, is_first = 1;
749 struct langwell_dtd *dtd, *last_dtd = NULL;
750 struct langwell_udc *dev;
751 dma_addr_t dma;
752
753 dev = req->ep->dev;
754 VDBG(dev, "---> %s()\n", __func__);
755 do {
756 dtd = build_dtd(req, &count, &dma, &is_last);
757 if (dtd == NULL)
758 return -ENOMEM;
759
760 if (is_first) {
761 is_first = 0;
762 req->head = dtd;
763 } else {
764 last_dtd->dtd_next = cpu_to_le32(dma);
765 last_dtd->next_dtd_virt = dtd;
766 }
767 last_dtd = dtd;
768 req->dtd_count++;
769 } while (!is_last);
770
771 /* set terminate bit to 1 for the last dTD */
772 dtd->dtd_next = DTD_TERM;
773
774 req->tail = dtd;
775
776 VDBG(dev, "<--- %s()\n", __func__);
777 return 0;
778 }
779
780 /*-------------------------------------------------------------------------*/
781
782 /* queue (submits) an I/O requests to an endpoint */
783 static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
784 gfp_t gfp_flags)
785 {
786 struct langwell_request *req;
787 struct langwell_ep *ep;
788 struct langwell_udc *dev;
789 unsigned long flags;
790 int is_iso = 0, zlflag = 0;
791
792 /* always require a cpu-view buffer */
793 req = container_of(_req, struct langwell_request, req);
794 ep = container_of(_ep, struct langwell_ep, ep);
795
796 if (!_req || !_req->complete || !_req->buf
797 || !list_empty(&req->queue)) {
798 return -EINVAL;
799 }
800
801 if (unlikely(!_ep || !ep->desc))
802 return -EINVAL;
803
804 dev = ep->dev;
805 req->ep = ep;
806 VDBG(dev, "---> %s()\n", __func__);
807
808 if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
809 if (req->req.length > ep->ep.maxpacket)
810 return -EMSGSIZE;
811 is_iso = 1;
812 }
813
814 if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
815 return -ESHUTDOWN;
816
817 /* set up dma mapping in case the caller didn't */
818 if (_req->dma == DMA_ADDR_INVALID) {
819 /* WORKAROUND: WARN_ON(size == 0) */
820 if (_req->length == 0) {
821 VDBG(dev, "req->length: 0->1\n");
822 zlflag = 1;
823 _req->length++;
824 }
825
826 _req->dma = dma_map_single(&dev->pdev->dev,
827 _req->buf, _req->length,
828 is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
829 if (zlflag && (_req->length == 1)) {
830 VDBG(dev, "req->length: 1->0\n");
831 zlflag = 0;
832 _req->length = 0;
833 }
834
835 req->mapped = 1;
836 VDBG(dev, "req->mapped = 1\n");
837 } else {
838 dma_sync_single_for_device(&dev->pdev->dev,
839 _req->dma, _req->length,
840 is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
841 req->mapped = 0;
842 VDBG(dev, "req->mapped = 0\n");
843 }
844
845 DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
846 _ep->name,
847 _req, _req->length, _req->buf, _req->dma);
848
849 _req->status = -EINPROGRESS;
850 _req->actual = 0;
851 req->dtd_count = 0;
852
853 spin_lock_irqsave(&dev->lock, flags);
854
855 /* build and put dTDs to endpoint queue */
856 if (!req_to_dtd(req)) {
857 queue_dtd(ep, req);
858 } else {
859 spin_unlock_irqrestore(&dev->lock, flags);
860 return -ENOMEM;
861 }
862
863 /* update ep0 state */
864 if (ep->ep_num == 0)
865 dev->ep0_state = DATA_STATE_XMIT;
866
867 if (likely(req != NULL)) {
868 list_add_tail(&req->queue, &ep->queue);
869 VDBG(dev, "list_add_tail() \n");
870 }
871
872 spin_unlock_irqrestore(&dev->lock, flags);
873
874 VDBG(dev, "<--- %s()\n", __func__);
875 return 0;
876 }
877
878
879 /* dequeue (cancels, unlinks) an I/O request from an endpoint */
880 static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
881 {
882 struct langwell_ep *ep;
883 struct langwell_udc *dev;
884 struct langwell_request *req;
885 unsigned long flags;
886 int stopped, ep_num, retval = 0;
887 u32 endptctrl;
888
889 ep = container_of(_ep, struct langwell_ep, ep);
890 dev = ep->dev;
891 VDBG(dev, "---> %s()\n", __func__);
892
893 if (!_ep || !ep->desc || !_req)
894 return -EINVAL;
895
896 if (!dev->driver)
897 return -ESHUTDOWN;
898
899 spin_lock_irqsave(&dev->lock, flags);
900 stopped = ep->stopped;
901
902 /* quiesce dma while we patch the queue */
903 ep->stopped = 1;
904 ep_num = ep->ep_num;
905
906 /* disable endpoint control register */
907 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
908 if (is_in(ep))
909 endptctrl &= ~EPCTRL_TXE;
910 else
911 endptctrl &= ~EPCTRL_RXE;
912 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
913
914 /* make sure it's still queued on this endpoint */
915 list_for_each_entry(req, &ep->queue, queue) {
916 if (&req->req == _req)
917 break;
918 }
919
920 if (&req->req != _req) {
921 retval = -EINVAL;
922 goto done;
923 }
924
925 /* queue head may be partially complete. */
926 if (ep->queue.next == &req->queue) {
927 DBG(dev, "unlink (%s) dma\n", _ep->name);
928 _req->status = -ECONNRESET;
929 langwell_ep_fifo_flush(&ep->ep);
930
931 /* not the last request in endpoint queue */
932 if (likely(ep->queue.next == &req->queue)) {
933 struct langwell_dqh *dqh;
934 struct langwell_request *next_req;
935
936 dqh = ep->dqh;
937 next_req = list_entry(req->queue.next,
938 struct langwell_request, queue);
939
940 /* point the dQH to the first dTD of next request */
941 writel((u32) next_req->head, &dqh->dqh_current);
942 }
943 } else {
944 struct langwell_request *prev_req;
945
946 prev_req = list_entry(req->queue.prev,
947 struct langwell_request, queue);
948 writel(readl(&req->tail->dtd_next),
949 &prev_req->tail->dtd_next);
950 }
951
952 done(ep, req, -ECONNRESET);
953
954 done:
955 /* enable endpoint again */
956 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
957 if (is_in(ep))
958 endptctrl |= EPCTRL_TXE;
959 else
960 endptctrl |= EPCTRL_RXE;
961 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
962
963 ep->stopped = stopped;
964 spin_unlock_irqrestore(&dev->lock, flags);
965
966 VDBG(dev, "<--- %s()\n", __func__);
967 return retval;
968 }
969
970
971 /*-------------------------------------------------------------------------*/
972
973 /* endpoint set/clear halt */
974 static void ep_set_halt(struct langwell_ep *ep, int value)
975 {
976 u32 endptctrl = 0;
977 int ep_num;
978 struct langwell_udc *dev = ep->dev;
979 VDBG(dev, "---> %s()\n", __func__);
980
981 ep_num = ep->ep_num;
982 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
983
984 /* value: 1 - set halt, 0 - clear halt */
985 if (value) {
986 /* set the stall bit */
987 if (is_in(ep))
988 endptctrl |= EPCTRL_TXS;
989 else
990 endptctrl |= EPCTRL_RXS;
991 } else {
992 /* clear the stall bit and reset data toggle */
993 if (is_in(ep)) {
994 endptctrl &= ~EPCTRL_TXS;
995 endptctrl |= EPCTRL_TXR;
996 } else {
997 endptctrl &= ~EPCTRL_RXS;
998 endptctrl |= EPCTRL_RXR;
999 }
1000 }
1001
1002 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
1003
1004 VDBG(dev, "<--- %s()\n", __func__);
1005 }
1006
1007
1008 /* set the endpoint halt feature */
1009 static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
1010 {
1011 struct langwell_ep *ep;
1012 struct langwell_udc *dev;
1013 unsigned long flags;
1014 int retval = 0;
1015
1016 ep = container_of(_ep, struct langwell_ep, ep);
1017 dev = ep->dev;
1018
1019 VDBG(dev, "---> %s()\n", __func__);
1020
1021 if (!_ep || !ep->desc)
1022 return -EINVAL;
1023
1024 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
1025 return -ESHUTDOWN;
1026
1027 if (ep->desc && (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
1028 == USB_ENDPOINT_XFER_ISOC)
1029 return -EOPNOTSUPP;
1030
1031 spin_lock_irqsave(&dev->lock, flags);
1032
1033 /*
1034 * attempt to halt IN ep will fail if any transfer requests
1035 * are still queue
1036 */
1037 if (!list_empty(&ep->queue) && is_in(ep) && value) {
1038 /* IN endpoint FIFO holds bytes */
1039 DBG(dev, "%s FIFO holds bytes\n", _ep->name);
1040 retval = -EAGAIN;
1041 goto done;
1042 }
1043
1044 /* endpoint set/clear halt */
1045 if (ep->ep_num) {
1046 ep_set_halt(ep, value);
1047 } else { /* endpoint 0 */
1048 dev->ep0_state = WAIT_FOR_SETUP;
1049 dev->ep0_dir = USB_DIR_OUT;
1050 }
1051 done:
1052 spin_unlock_irqrestore(&dev->lock, flags);
1053 DBG(dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
1054 VDBG(dev, "<--- %s()\n", __func__);
1055 return retval;
1056 }
1057
1058
1059 /* set the halt feature and ignores clear requests */
1060 static int langwell_ep_set_wedge(struct usb_ep *_ep)
1061 {
1062 struct langwell_ep *ep;
1063 struct langwell_udc *dev;
1064
1065 ep = container_of(_ep, struct langwell_ep, ep);
1066 dev = ep->dev;
1067
1068 VDBG(dev, "---> %s()\n", __func__);
1069
1070 if (!_ep || !ep->desc)
1071 return -EINVAL;
1072
1073 VDBG(dev, "<--- %s()\n", __func__);
1074 return usb_ep_set_halt(_ep);
1075 }
1076
1077
1078 /* flush contents of a fifo */
1079 static void langwell_ep_fifo_flush(struct usb_ep *_ep)
1080 {
1081 struct langwell_ep *ep;
1082 struct langwell_udc *dev;
1083 u32 flush_bit;
1084 unsigned long timeout;
1085
1086 ep = container_of(_ep, struct langwell_ep, ep);
1087 dev = ep->dev;
1088
1089 VDBG(dev, "---> %s()\n", __func__);
1090
1091 if (!_ep || !ep->desc) {
1092 VDBG(dev, "ep or ep->desc is NULL\n");
1093 VDBG(dev, "<--- %s()\n", __func__);
1094 return;
1095 }
1096
1097 VDBG(dev, "%s-%s fifo flush\n", _ep->name, is_in(ep) ? "in" : "out");
1098
1099 /* flush endpoint buffer */
1100 if (ep->ep_num == 0)
1101 flush_bit = (1 << 16) | 1;
1102 else if (is_in(ep))
1103 flush_bit = 1 << (ep->ep_num + 16); /* TX */
1104 else
1105 flush_bit = 1 << ep->ep_num; /* RX */
1106
1107 /* wait until flush complete */
1108 timeout = jiffies + FLUSH_TIMEOUT;
1109 do {
1110 writel(flush_bit, &dev->op_regs->endptflush);
1111 while (readl(&dev->op_regs->endptflush)) {
1112 if (time_after(jiffies, timeout)) {
1113 ERROR(dev, "ep flush timeout\n");
1114 goto done;
1115 }
1116 cpu_relax();
1117 }
1118 } while (readl(&dev->op_regs->endptstat) & flush_bit);
1119 done:
1120 VDBG(dev, "<--- %s()\n", __func__);
1121 }
1122
1123
1124 /* endpoints operations structure */
1125 static const struct usb_ep_ops langwell_ep_ops = {
1126
1127 /* configure endpoint, making it usable */
1128 .enable = langwell_ep_enable,
1129
1130 /* endpoint is no longer usable */
1131 .disable = langwell_ep_disable,
1132
1133 /* allocate a request object to use with this endpoint */
1134 .alloc_request = langwell_alloc_request,
1135
1136 /* free a request object */
1137 .free_request = langwell_free_request,
1138
1139 /* queue (submits) an I/O requests to an endpoint */
1140 .queue = langwell_ep_queue,
1141
1142 /* dequeue (cancels, unlinks) an I/O request from an endpoint */
1143 .dequeue = langwell_ep_dequeue,
1144
1145 /* set the endpoint halt feature */
1146 .set_halt = langwell_ep_set_halt,
1147
1148 /* set the halt feature and ignores clear requests */
1149 .set_wedge = langwell_ep_set_wedge,
1150
1151 /* flush contents of a fifo */
1152 .fifo_flush = langwell_ep_fifo_flush,
1153 };
1154
1155
1156 /*-------------------------------------------------------------------------*/
1157
1158 /* device controller usb_gadget_ops structure */
1159
1160 /* returns the current frame number */
1161 static int langwell_get_frame(struct usb_gadget *_gadget)
1162 {
1163 struct langwell_udc *dev;
1164 u16 retval;
1165
1166 if (!_gadget)
1167 return -ENODEV;
1168
1169 dev = container_of(_gadget, struct langwell_udc, gadget);
1170 VDBG(dev, "---> %s()\n", __func__);
1171
1172 retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
1173
1174 VDBG(dev, "<--- %s()\n", __func__);
1175 return retval;
1176 }
1177
1178
1179 /* tries to wake up the host connected to this gadget */
1180 static int langwell_wakeup(struct usb_gadget *_gadget)
1181 {
1182 struct langwell_udc *dev;
1183 u32 portsc1, devlc;
1184 unsigned long flags;
1185
1186 if (!_gadget)
1187 return 0;
1188
1189 dev = container_of(_gadget, struct langwell_udc, gadget);
1190 VDBG(dev, "---> %s()\n", __func__);
1191
1192 /* Remote Wakeup feature not enabled by host */
1193 if (!dev->remote_wakeup)
1194 return -ENOTSUPP;
1195
1196 spin_lock_irqsave(&dev->lock, flags);
1197
1198 portsc1 = readl(&dev->op_regs->portsc1);
1199 if (!(portsc1 & PORTS_SUSP)) {
1200 spin_unlock_irqrestore(&dev->lock, flags);
1201 return 0;
1202 }
1203
1204 /* LPM L1 to L0, remote wakeup */
1205 if (dev->lpm && dev->lpm_state == LPM_L1) {
1206 portsc1 |= PORTS_SLP;
1207 writel(portsc1, &dev->op_regs->portsc1);
1208 }
1209
1210 /* force port resume */
1211 if (dev->usb_state == USB_STATE_SUSPENDED) {
1212 portsc1 |= PORTS_FPR;
1213 writel(portsc1, &dev->op_regs->portsc1);
1214 }
1215
1216 /* exit PHY low power suspend */
1217 devlc = readl(&dev->op_regs->devlc);
1218 VDBG(dev, "devlc = 0x%08x\n", devlc);
1219 devlc &= ~LPM_PHCD;
1220 writel(devlc, &dev->op_regs->devlc);
1221
1222 spin_unlock_irqrestore(&dev->lock, flags);
1223
1224 VDBG(dev, "<--- %s()\n", __func__);
1225 return 0;
1226 }
1227
1228
1229 /* notify controller that VBUS is powered or not */
1230 static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
1231 {
1232 struct langwell_udc *dev;
1233 unsigned long flags;
1234 u32 usbcmd;
1235
1236 if (!_gadget)
1237 return -ENODEV;
1238
1239 dev = container_of(_gadget, struct langwell_udc, gadget);
1240 VDBG(dev, "---> %s()\n", __func__);
1241
1242 spin_lock_irqsave(&dev->lock, flags);
1243 VDBG(dev, "VBUS status: %s\n", is_active ? "on" : "off");
1244
1245 dev->vbus_active = (is_active != 0);
1246 if (dev->driver && dev->softconnected && dev->vbus_active) {
1247 usbcmd = readl(&dev->op_regs->usbcmd);
1248 usbcmd |= CMD_RUNSTOP;
1249 writel(usbcmd, &dev->op_regs->usbcmd);
1250 } else {
1251 usbcmd = readl(&dev->op_regs->usbcmd);
1252 usbcmd &= ~CMD_RUNSTOP;
1253 writel(usbcmd, &dev->op_regs->usbcmd);
1254 }
1255
1256 spin_unlock_irqrestore(&dev->lock, flags);
1257
1258 VDBG(dev, "<--- %s()\n", __func__);
1259 return 0;
1260 }
1261
1262
1263 /* constrain controller's VBUS power usage */
1264 static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
1265 {
1266 struct langwell_udc *dev;
1267
1268 if (!_gadget)
1269 return -ENODEV;
1270
1271 dev = container_of(_gadget, struct langwell_udc, gadget);
1272 VDBG(dev, "---> %s()\n", __func__);
1273
1274 if (dev->transceiver) {
1275 VDBG(dev, "otg_set_power\n");
1276 VDBG(dev, "<--- %s()\n", __func__);
1277 return otg_set_power(dev->transceiver, mA);
1278 }
1279
1280 VDBG(dev, "<--- %s()\n", __func__);
1281 return -ENOTSUPP;
1282 }
1283
1284
1285 /* D+ pullup, software-controlled connect/disconnect to USB host */
1286 static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
1287 {
1288 struct langwell_udc *dev;
1289 u32 usbcmd;
1290 unsigned long flags;
1291
1292 if (!_gadget)
1293 return -ENODEV;
1294
1295 dev = container_of(_gadget, struct langwell_udc, gadget);
1296
1297 VDBG(dev, "---> %s()\n", __func__);
1298
1299 spin_lock_irqsave(&dev->lock, flags);
1300 dev->softconnected = (is_on != 0);
1301
1302 if (dev->driver && dev->softconnected && dev->vbus_active) {
1303 usbcmd = readl(&dev->op_regs->usbcmd);
1304 usbcmd |= CMD_RUNSTOP;
1305 writel(usbcmd, &dev->op_regs->usbcmd);
1306 } else {
1307 usbcmd = readl(&dev->op_regs->usbcmd);
1308 usbcmd &= ~CMD_RUNSTOP;
1309 writel(usbcmd, &dev->op_regs->usbcmd);
1310 }
1311 spin_unlock_irqrestore(&dev->lock, flags);
1312
1313 VDBG(dev, "<--- %s()\n", __func__);
1314 return 0;
1315 }
1316
1317
1318 /* device controller usb_gadget_ops structure */
1319 static const struct usb_gadget_ops langwell_ops = {
1320
1321 /* returns the current frame number */
1322 .get_frame = langwell_get_frame,
1323
1324 /* tries to wake up the host connected to this gadget */
1325 .wakeup = langwell_wakeup,
1326
1327 /* set the device selfpowered feature, always selfpowered */
1328 /* .set_selfpowered = langwell_set_selfpowered, */
1329
1330 /* notify controller that VBUS is powered or not */
1331 .vbus_session = langwell_vbus_session,
1332
1333 /* constrain controller's VBUS power usage */
1334 .vbus_draw = langwell_vbus_draw,
1335
1336 /* D+ pullup, software-controlled connect/disconnect to USB host */
1337 .pullup = langwell_pullup,
1338 };
1339
1340
1341 /*-------------------------------------------------------------------------*/
1342
1343 /* device controller operations */
1344
1345 /* reset device controller */
1346 static int langwell_udc_reset(struct langwell_udc *dev)
1347 {
1348 u32 usbcmd, usbmode, devlc, endpointlistaddr;
1349 unsigned long timeout;
1350
1351 if (!dev)
1352 return -EINVAL;
1353
1354 DBG(dev, "---> %s()\n", __func__);
1355
1356 /* set controller to stop state */
1357 usbcmd = readl(&dev->op_regs->usbcmd);
1358 usbcmd &= ~CMD_RUNSTOP;
1359 writel(usbcmd, &dev->op_regs->usbcmd);
1360
1361 /* reset device controller */
1362 usbcmd = readl(&dev->op_regs->usbcmd);
1363 usbcmd |= CMD_RST;
1364 writel(usbcmd, &dev->op_regs->usbcmd);
1365
1366 /* wait for reset to complete */
1367 timeout = jiffies + RESET_TIMEOUT;
1368 while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
1369 if (time_after(jiffies, timeout)) {
1370 ERROR(dev, "device reset timeout\n");
1371 return -ETIMEDOUT;
1372 }
1373 cpu_relax();
1374 }
1375
1376 /* set controller to device mode */
1377 usbmode = readl(&dev->op_regs->usbmode);
1378 usbmode |= MODE_DEVICE;
1379
1380 /* turn setup lockout off, require setup tripwire in usbcmd */
1381 usbmode |= MODE_SLOM;
1382
1383 writel(usbmode, &dev->op_regs->usbmode);
1384 usbmode = readl(&dev->op_regs->usbmode);
1385 VDBG(dev, "usbmode=0x%08x\n", usbmode);
1386
1387 /* Write-Clear setup status */
1388 writel(0, &dev->op_regs->usbsts);
1389
1390 /* if support USB LPM, ACK all LPM token */
1391 if (dev->lpm) {
1392 devlc = readl(&dev->op_regs->devlc);
1393 devlc &= ~LPM_STL; /* don't STALL LPM token */
1394 devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
1395 writel(devlc, &dev->op_regs->devlc);
1396 }
1397
1398 /* fill endpointlistaddr register */
1399 endpointlistaddr = dev->ep_dqh_dma;
1400 endpointlistaddr &= ENDPOINTLISTADDR_MASK;
1401 writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
1402
1403 VDBG(dev, "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
1404 dev->ep_dqh, endpointlistaddr,
1405 readl(&dev->op_regs->endpointlistaddr));
1406 DBG(dev, "<--- %s()\n", __func__);
1407 return 0;
1408 }
1409
1410
1411 /* reinitialize device controller endpoints */
1412 static int eps_reinit(struct langwell_udc *dev)
1413 {
1414 struct langwell_ep *ep;
1415 char name[14];
1416 int i;
1417
1418 VDBG(dev, "---> %s()\n", __func__);
1419
1420 /* initialize ep0 */
1421 ep = &dev->ep[0];
1422 ep->dev = dev;
1423 strncpy(ep->name, "ep0", sizeof(ep->name));
1424 ep->ep.name = ep->name;
1425 ep->ep.ops = &langwell_ep_ops;
1426 ep->stopped = 0;
1427 ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
1428 ep->ep_num = 0;
1429 ep->desc = &langwell_ep0_desc;
1430 INIT_LIST_HEAD(&ep->queue);
1431
1432 ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
1433
1434 /* initialize other endpoints */
1435 for (i = 2; i < dev->ep_max; i++) {
1436 ep = &dev->ep[i];
1437 if (i % 2)
1438 snprintf(name, sizeof(name), "ep%din", i / 2);
1439 else
1440 snprintf(name, sizeof(name), "ep%dout", i / 2);
1441 ep->dev = dev;
1442 strncpy(ep->name, name, sizeof(ep->name));
1443 ep->ep.name = ep->name;
1444
1445 ep->ep.ops = &langwell_ep_ops;
1446 ep->stopped = 0;
1447 ep->ep.maxpacket = (unsigned short) ~0;
1448 ep->ep_num = i / 2;
1449
1450 INIT_LIST_HEAD(&ep->queue);
1451 list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
1452
1453 ep->dqh = &dev->ep_dqh[i];
1454 }
1455
1456 VDBG(dev, "<--- %s()\n", __func__);
1457 return 0;
1458 }
1459
1460
1461 /* enable interrupt and set controller to run state */
1462 static void langwell_udc_start(struct langwell_udc *dev)
1463 {
1464 u32 usbintr, usbcmd;
1465 DBG(dev, "---> %s()\n", __func__);
1466
1467 /* enable interrupts */
1468 usbintr = INTR_ULPIE /* ULPI */
1469 | INTR_SLE /* suspend */
1470 /* | INTR_SRE SOF received */
1471 | INTR_URE /* USB reset */
1472 | INTR_AAE /* async advance */
1473 | INTR_SEE /* system error */
1474 | INTR_FRE /* frame list rollover */
1475 | INTR_PCE /* port change detect */
1476 | INTR_UEE /* USB error interrupt */
1477 | INTR_UE; /* USB interrupt */
1478 writel(usbintr, &dev->op_regs->usbintr);
1479
1480 /* clear stopped bit */
1481 dev->stopped = 0;
1482
1483 /* set controller to run */
1484 usbcmd = readl(&dev->op_regs->usbcmd);
1485 usbcmd |= CMD_RUNSTOP;
1486 writel(usbcmd, &dev->op_regs->usbcmd);
1487
1488 DBG(dev, "<--- %s()\n", __func__);
1489 return;
1490 }
1491
1492
1493 /* disable interrupt and set controller to stop state */
1494 static void langwell_udc_stop(struct langwell_udc *dev)
1495 {
1496 u32 usbcmd;
1497
1498 DBG(dev, "---> %s()\n", __func__);
1499
1500 /* disable all interrupts */
1501 writel(0, &dev->op_regs->usbintr);
1502
1503 /* set stopped bit */
1504 dev->stopped = 1;
1505
1506 /* set controller to stop state */
1507 usbcmd = readl(&dev->op_regs->usbcmd);
1508 usbcmd &= ~CMD_RUNSTOP;
1509 writel(usbcmd, &dev->op_regs->usbcmd);
1510
1511 DBG(dev, "<--- %s()\n", __func__);
1512 return;
1513 }
1514
1515
1516 /* stop all USB activities */
1517 static void stop_activity(struct langwell_udc *dev,
1518 struct usb_gadget_driver *driver)
1519 {
1520 struct langwell_ep *ep;
1521 DBG(dev, "---> %s()\n", __func__);
1522
1523 nuke(&dev->ep[0], -ESHUTDOWN);
1524
1525 list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
1526 nuke(ep, -ESHUTDOWN);
1527 }
1528
1529 /* report disconnect; the driver is already quiesced */
1530 if (driver) {
1531 spin_unlock(&dev->lock);
1532 driver->disconnect(&dev->gadget);
1533 spin_lock(&dev->lock);
1534 }
1535
1536 DBG(dev, "<--- %s()\n", __func__);
1537 }
1538
1539
1540 /*-------------------------------------------------------------------------*/
1541
1542 /* device "function" sysfs attribute file */
1543 static ssize_t show_function(struct device *_dev,
1544 struct device_attribute *attr, char *buf)
1545 {
1546 struct langwell_udc *dev = the_controller;
1547
1548 if (!dev->driver || !dev->driver->function
1549 || strlen(dev->driver->function) > PAGE_SIZE)
1550 return 0;
1551
1552 return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
1553 }
1554 static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
1555
1556
1557 /* device "langwell_udc" sysfs attribute file */
1558 static ssize_t show_langwell_udc(struct device *_dev,
1559 struct device_attribute *attr, char *buf)
1560 {
1561 struct langwell_udc *dev = the_controller;
1562 struct langwell_request *req;
1563 struct langwell_ep *ep = NULL;
1564 char *next;
1565 unsigned size;
1566 unsigned t;
1567 unsigned i;
1568 unsigned long flags;
1569 u32 tmp_reg;
1570
1571 next = buf;
1572 size = PAGE_SIZE;
1573 spin_lock_irqsave(&dev->lock, flags);
1574
1575 /* driver basic information */
1576 t = scnprintf(next, size,
1577 DRIVER_DESC "\n"
1578 "%s version: %s\n"
1579 "Gadget driver: %s\n\n",
1580 driver_name, DRIVER_VERSION,
1581 dev->driver ? dev->driver->driver.name : "(none)");
1582 size -= t;
1583 next += t;
1584
1585 /* device registers */
1586 tmp_reg = readl(&dev->op_regs->usbcmd);
1587 t = scnprintf(next, size,
1588 "USBCMD reg:\n"
1589 "SetupTW: %d\n"
1590 "Run/Stop: %s\n\n",
1591 (tmp_reg & CMD_SUTW) ? 1 : 0,
1592 (tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
1593 size -= t;
1594 next += t;
1595
1596 tmp_reg = readl(&dev->op_regs->usbsts);
1597 t = scnprintf(next, size,
1598 "USB Status Reg:\n"
1599 "Device Suspend: %d\n"
1600 "Reset Received: %d\n"
1601 "System Error: %s\n"
1602 "USB Error Interrupt: %s\n\n",
1603 (tmp_reg & STS_SLI) ? 1 : 0,
1604 (tmp_reg & STS_URI) ? 1 : 0,
1605 (tmp_reg & STS_SEI) ? "Error" : "No error",
1606 (tmp_reg & STS_UEI) ? "Error detected" : "No error");
1607 size -= t;
1608 next += t;
1609
1610 tmp_reg = readl(&dev->op_regs->usbintr);
1611 t = scnprintf(next, size,
1612 "USB Intrrupt Enable Reg:\n"
1613 "Sleep Enable: %d\n"
1614 "SOF Received Enable: %d\n"
1615 "Reset Enable: %d\n"
1616 "System Error Enable: %d\n"
1617 "Port Change Dectected Enable: %d\n"
1618 "USB Error Intr Enable: %d\n"
1619 "USB Intr Enable: %d\n\n",
1620 (tmp_reg & INTR_SLE) ? 1 : 0,
1621 (tmp_reg & INTR_SRE) ? 1 : 0,
1622 (tmp_reg & INTR_URE) ? 1 : 0,
1623 (tmp_reg & INTR_SEE) ? 1 : 0,
1624 (tmp_reg & INTR_PCE) ? 1 : 0,
1625 (tmp_reg & INTR_UEE) ? 1 : 0,
1626 (tmp_reg & INTR_UE) ? 1 : 0);
1627 size -= t;
1628 next += t;
1629
1630 tmp_reg = readl(&dev->op_regs->frindex);
1631 t = scnprintf(next, size,
1632 "USB Frame Index Reg:\n"
1633 "Frame Number is 0x%08x\n\n",
1634 (tmp_reg & FRINDEX_MASK));
1635 size -= t;
1636 next += t;
1637
1638 tmp_reg = readl(&dev->op_regs->deviceaddr);
1639 t = scnprintf(next, size,
1640 "USB Device Address Reg:\n"
1641 "Device Addr is 0x%x\n\n",
1642 USBADR(tmp_reg));
1643 size -= t;
1644 next += t;
1645
1646 tmp_reg = readl(&dev->op_regs->endpointlistaddr);
1647 t = scnprintf(next, size,
1648 "USB Endpoint List Address Reg:\n"
1649 "Endpoint List Pointer is 0x%x\n\n",
1650 EPBASE(tmp_reg));
1651 size -= t;
1652 next += t;
1653
1654 tmp_reg = readl(&dev->op_regs->portsc1);
1655 t = scnprintf(next, size,
1656 "USB Port Status & Control Reg:\n"
1657 "Port Reset: %s\n"
1658 "Port Suspend Mode: %s\n"
1659 "Over-current Change: %s\n"
1660 "Port Enable/Disable Change: %s\n"
1661 "Port Enabled/Disabled: %s\n"
1662 "Current Connect Status: %s\n\n",
1663 (tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
1664 (tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
1665 (tmp_reg & PORTS_OCC) ? "Detected" : "No",
1666 (tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
1667 (tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
1668 (tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached");
1669 size -= t;
1670 next += t;
1671
1672 tmp_reg = readl(&dev->op_regs->devlc);
1673 t = scnprintf(next, size,
1674 "Device LPM Control Reg:\n"
1675 "Parallel Transceiver : %d\n"
1676 "Serial Transceiver : %d\n"
1677 "Port Speed: %s\n"
1678 "Port Force Full Speed Connenct: %s\n"
1679 "PHY Low Power Suspend Clock Disable: %s\n"
1680 "BmAttributes: %d\n\n",
1681 LPM_PTS(tmp_reg),
1682 (tmp_reg & LPM_STS) ? 1 : 0,
1683 ({
1684 char *s;
1685 switch (LPM_PSPD(tmp_reg)) {
1686 case LPM_SPEED_FULL:
1687 s = "Full Speed"; break;
1688 case LPM_SPEED_LOW:
1689 s = "Low Speed"; break;
1690 case LPM_SPEED_HIGH:
1691 s = "High Speed"; break;
1692 default:
1693 s = "Unknown Speed"; break;
1694 }
1695 s;
1696 }),
1697 (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
1698 (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
1699 LPM_BA(tmp_reg));
1700 size -= t;
1701 next += t;
1702
1703 tmp_reg = readl(&dev->op_regs->usbmode);
1704 t = scnprintf(next, size,
1705 "USB Mode Reg:\n"
1706 "Controller Mode is : %s\n\n", ({
1707 char *s;
1708 switch (MODE_CM(tmp_reg)) {
1709 case MODE_IDLE:
1710 s = "Idle"; break;
1711 case MODE_DEVICE:
1712 s = "Device Controller"; break;
1713 case MODE_HOST:
1714 s = "Host Controller"; break;
1715 default:
1716 s = "None"; break;
1717 }
1718 s;
1719 }));
1720 size -= t;
1721 next += t;
1722
1723 tmp_reg = readl(&dev->op_regs->endptsetupstat);
1724 t = scnprintf(next, size,
1725 "Endpoint Setup Status Reg:\n"
1726 "SETUP on ep 0x%04x\n\n",
1727 tmp_reg & SETUPSTAT_MASK);
1728 size -= t;
1729 next += t;
1730
1731 for (i = 0; i < dev->ep_max / 2; i++) {
1732 tmp_reg = readl(&dev->op_regs->endptctrl[i]);
1733 t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
1734 i, tmp_reg);
1735 size -= t;
1736 next += t;
1737 }
1738 tmp_reg = readl(&dev->op_regs->endptprime);
1739 t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
1740 size -= t;
1741 next += t;
1742
1743 /* langwell_udc, langwell_ep, langwell_request structure information */
1744 ep = &dev->ep[0];
1745 t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
1746 ep->ep.name, ep->ep.maxpacket, ep->ep_num);
1747 size -= t;
1748 next += t;
1749
1750 if (list_empty(&ep->queue)) {
1751 t = scnprintf(next, size, "its req queue is empty\n\n");
1752 size -= t;
1753 next += t;
1754 } else {
1755 list_for_each_entry(req, &ep->queue, queue) {
1756 t = scnprintf(next, size,
1757 "req %p actual 0x%x length 0x%x buf %p\n",
1758 &req->req, req->req.actual,
1759 req->req.length, req->req.buf);
1760 size -= t;
1761 next += t;
1762 }
1763 }
1764 /* other gadget->eplist ep */
1765 list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
1766 if (ep->desc) {
1767 t = scnprintf(next, size,
1768 "\n%s MaxPacketSize: 0x%x, "
1769 "ep_num: %d\n",
1770 ep->ep.name, ep->ep.maxpacket,
1771 ep->ep_num);
1772 size -= t;
1773 next += t;
1774
1775 if (list_empty(&ep->queue)) {
1776 t = scnprintf(next, size,
1777 "its req queue is empty\n\n");
1778 size -= t;
1779 next += t;
1780 } else {
1781 list_for_each_entry(req, &ep->queue, queue) {
1782 t = scnprintf(next, size,
1783 "req %p actual 0x%x length "
1784 "0x%x buf %p\n",
1785 &req->req, req->req.actual,
1786 req->req.length, req->req.buf);
1787 size -= t;
1788 next += t;
1789 }
1790 }
1791 }
1792 }
1793
1794 spin_unlock_irqrestore(&dev->lock, flags);
1795 return PAGE_SIZE - size;
1796 }
1797 static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
1798
1799
1800 /*-------------------------------------------------------------------------*/
1801
1802 /*
1803 * when a driver is successfully registered, it will receive
1804 * control requests including set_configuration(), which enables
1805 * non-control requests. then usb traffic follows until a
1806 * disconnect is reported. then a host may connect again, or
1807 * the driver might get unbound.
1808 */
1809
1810 int usb_gadget_register_driver(struct usb_gadget_driver *driver)
1811 {
1812 struct langwell_udc *dev = the_controller;
1813 unsigned long flags;
1814 int retval;
1815
1816 if (!dev)
1817 return -ENODEV;
1818
1819 DBG(dev, "---> %s()\n", __func__);
1820
1821 if (dev->driver)
1822 return -EBUSY;
1823
1824 spin_lock_irqsave(&dev->lock, flags);
1825
1826 /* hook up the driver ... */
1827 driver->driver.bus = NULL;
1828 dev->driver = driver;
1829 dev->gadget.dev.driver = &driver->driver;
1830
1831 spin_unlock_irqrestore(&dev->lock, flags);
1832
1833 retval = driver->bind(&dev->gadget);
1834 if (retval) {
1835 DBG(dev, "bind to driver %s --> %d\n",
1836 driver->driver.name, retval);
1837 dev->driver = NULL;
1838 dev->gadget.dev.driver = NULL;
1839 return retval;
1840 }
1841
1842 retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
1843 if (retval)
1844 goto err_unbind;
1845
1846 dev->usb_state = USB_STATE_ATTACHED;
1847 dev->ep0_state = WAIT_FOR_SETUP;
1848 dev->ep0_dir = USB_DIR_OUT;
1849
1850 /* enable interrupt and set controller to run state */
1851 if (dev->got_irq)
1852 langwell_udc_start(dev);
1853
1854 VDBG(dev, "After langwell_udc_start(), print all registers:\n");
1855 #ifdef VERBOSE
1856 print_all_registers(dev);
1857 #endif
1858
1859 INFO(dev, "register driver: %s\n", driver->driver.name);
1860 VDBG(dev, "<--- %s()\n", __func__);
1861 return 0;
1862
1863 err_unbind:
1864 driver->unbind(&dev->gadget);
1865 dev->gadget.dev.driver = NULL;
1866 dev->driver = NULL;
1867
1868 DBG(dev, "<--- %s()\n", __func__);
1869 return retval;
1870 }
1871 EXPORT_SYMBOL(usb_gadget_register_driver);
1872
1873
1874 /* unregister gadget driver */
1875 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
1876 {
1877 struct langwell_udc *dev = the_controller;
1878 unsigned long flags;
1879
1880 if (!dev)
1881 return -ENODEV;
1882
1883 DBG(dev, "---> %s()\n", __func__);
1884
1885 if (unlikely(!driver || !driver->bind || !driver->unbind))
1886 return -EINVAL;
1887
1888 /* unbind OTG transceiver */
1889 if (dev->transceiver)
1890 (void)otg_set_peripheral(dev->transceiver, 0);
1891
1892 /* disable interrupt and set controller to stop state */
1893 langwell_udc_stop(dev);
1894
1895 dev->usb_state = USB_STATE_ATTACHED;
1896 dev->ep0_state = WAIT_FOR_SETUP;
1897 dev->ep0_dir = USB_DIR_OUT;
1898
1899 spin_lock_irqsave(&dev->lock, flags);
1900
1901 /* stop all usb activities */
1902 dev->gadget.speed = USB_SPEED_UNKNOWN;
1903 stop_activity(dev, driver);
1904 spin_unlock_irqrestore(&dev->lock, flags);
1905
1906 /* unbind gadget driver */
1907 driver->unbind(&dev->gadget);
1908 dev->gadget.dev.driver = NULL;
1909 dev->driver = NULL;
1910
1911 device_remove_file(&dev->pdev->dev, &dev_attr_function);
1912
1913 INFO(dev, "unregistered driver '%s'\n", driver->driver.name);
1914 DBG(dev, "<--- %s()\n", __func__);
1915 return 0;
1916 }
1917 EXPORT_SYMBOL(usb_gadget_unregister_driver);
1918
1919
1920 /*-------------------------------------------------------------------------*/
1921
1922 /*
1923 * setup tripwire is used as a semaphore to ensure that the setup data
1924 * payload is extracted from a dQH without being corrupted
1925 */
1926 static void setup_tripwire(struct langwell_udc *dev)
1927 {
1928 u32 usbcmd,
1929 endptsetupstat;
1930 unsigned long timeout;
1931 struct langwell_dqh *dqh;
1932
1933 VDBG(dev, "---> %s()\n", __func__);
1934
1935 /* ep0 OUT dQH */
1936 dqh = &dev->ep_dqh[EP_DIR_OUT];
1937
1938 /* Write-Clear endptsetupstat */
1939 endptsetupstat = readl(&dev->op_regs->endptsetupstat);
1940 writel(endptsetupstat, &dev->op_regs->endptsetupstat);
1941
1942 /* wait until endptsetupstat is cleared */
1943 timeout = jiffies + SETUPSTAT_TIMEOUT;
1944 while (readl(&dev->op_regs->endptsetupstat)) {
1945 if (time_after(jiffies, timeout)) {
1946 ERROR(dev, "setup_tripwire timeout\n");
1947 break;
1948 }
1949 cpu_relax();
1950 }
1951
1952 /* while a hazard exists when setup packet arrives */
1953 do {
1954 /* set setup tripwire bit */
1955 usbcmd = readl(&dev->op_regs->usbcmd);
1956 writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
1957
1958 /* copy the setup packet to local buffer */
1959 memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
1960 } while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
1961
1962 /* Write-Clear setup tripwire bit */
1963 usbcmd = readl(&dev->op_regs->usbcmd);
1964 writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
1965
1966 VDBG(dev, "<--- %s()\n", __func__);
1967 }
1968
1969
1970 /* protocol ep0 stall, will automatically be cleared on new transaction */
1971 static void ep0_stall(struct langwell_udc *dev)
1972 {
1973 u32 endptctrl;
1974
1975 VDBG(dev, "---> %s()\n", __func__);
1976
1977 /* set TX and RX to stall */
1978 endptctrl = readl(&dev->op_regs->endptctrl[0]);
1979 endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
1980 writel(endptctrl, &dev->op_regs->endptctrl[0]);
1981
1982 /* update ep0 state */
1983 dev->ep0_state = WAIT_FOR_SETUP;
1984 dev->ep0_dir = USB_DIR_OUT;
1985
1986 VDBG(dev, "<--- %s()\n", __func__);
1987 }
1988
1989
1990 /* PRIME a status phase for ep0 */
1991 static int prime_status_phase(struct langwell_udc *dev, int dir)
1992 {
1993 struct langwell_request *req;
1994 struct langwell_ep *ep;
1995 int status = 0;
1996
1997 VDBG(dev, "---> %s()\n", __func__);
1998
1999 if (dir == EP_DIR_IN)
2000 dev->ep0_dir = USB_DIR_IN;
2001 else
2002 dev->ep0_dir = USB_DIR_OUT;
2003
2004 ep = &dev->ep[0];
2005 dev->ep0_state = WAIT_FOR_OUT_STATUS;
2006
2007 req = dev->status_req;
2008
2009 req->ep = ep;
2010 req->req.length = 0;
2011 req->req.status = -EINPROGRESS;
2012 req->req.actual = 0;
2013 req->req.complete = NULL;
2014 req->dtd_count = 0;
2015
2016 if (!req_to_dtd(req))
2017 status = queue_dtd(ep, req);
2018 else
2019 return -ENOMEM;
2020
2021 if (status)
2022 ERROR(dev, "can't queue ep0 status request\n");
2023
2024 list_add_tail(&req->queue, &ep->queue);
2025
2026 VDBG(dev, "<--- %s()\n", __func__);
2027 return status;
2028 }
2029
2030
2031 /* SET_ADDRESS request routine */
2032 static void set_address(struct langwell_udc *dev, u16 value,
2033 u16 index, u16 length)
2034 {
2035 VDBG(dev, "---> %s()\n", __func__);
2036
2037 /* save the new address to device struct */
2038 dev->dev_addr = (u8) value;
2039 VDBG(dev, "dev->dev_addr = %d\n", dev->dev_addr);
2040
2041 /* update usb state */
2042 dev->usb_state = USB_STATE_ADDRESS;
2043
2044 /* STATUS phase */
2045 if (prime_status_phase(dev, EP_DIR_IN))
2046 ep0_stall(dev);
2047
2048 VDBG(dev, "<--- %s()\n", __func__);
2049 }
2050
2051
2052 /* return endpoint by windex */
2053 static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
2054 u16 wIndex)
2055 {
2056 struct langwell_ep *ep;
2057 VDBG(dev, "---> %s()\n", __func__);
2058
2059 if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
2060 return &dev->ep[0];
2061
2062 list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
2063 u8 bEndpointAddress;
2064 if (!ep->desc)
2065 continue;
2066
2067 bEndpointAddress = ep->desc->bEndpointAddress;
2068 if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
2069 continue;
2070
2071 if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
2072 == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
2073 return ep;
2074 }
2075
2076 VDBG(dev, "<--- %s()\n", __func__);
2077 return NULL;
2078 }
2079
2080
2081 /* return whether endpoint is stalled, 0: not stalled; 1: stalled */
2082 static int ep_is_stall(struct langwell_ep *ep)
2083 {
2084 struct langwell_udc *dev = ep->dev;
2085 u32 endptctrl;
2086 int retval;
2087
2088 VDBG(dev, "---> %s()\n", __func__);
2089
2090 endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
2091 if (is_in(ep))
2092 retval = endptctrl & EPCTRL_TXS ? 1 : 0;
2093 else
2094 retval = endptctrl & EPCTRL_RXS ? 1 : 0;
2095
2096 VDBG(dev, "<--- %s()\n", __func__);
2097 return retval;
2098 }
2099
2100
2101 /* GET_STATUS request routine */
2102 static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
2103 u16 index, u16 length)
2104 {
2105 struct langwell_request *req;
2106 struct langwell_ep *ep;
2107 u16 status_data = 0; /* 16 bits cpu view status data */
2108 int status = 0;
2109
2110 VDBG(dev, "---> %s()\n", __func__);
2111
2112 ep = &dev->ep[0];
2113
2114 if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
2115 /* get device status */
2116 status_data = 1 << USB_DEVICE_SELF_POWERED;
2117 status_data |= dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
2118 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
2119 /* get interface status */
2120 status_data = 0;
2121 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
2122 /* get endpoint status */
2123 struct langwell_ep *epn;
2124 epn = get_ep_by_windex(dev, index);
2125 /* stall if endpoint doesn't exist */
2126 if (!epn)
2127 goto stall;
2128
2129 status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
2130 }
2131
2132 dev->ep0_dir = USB_DIR_IN;
2133
2134 /* borrow the per device status_req */
2135 req = dev->status_req;
2136
2137 /* fill in the reqest structure */
2138 *((u16 *) req->req.buf) = cpu_to_le16(status_data);
2139 req->ep = ep;
2140 req->req.length = 2;
2141 req->req.status = -EINPROGRESS;
2142 req->req.actual = 0;
2143 req->req.complete = NULL;
2144 req->dtd_count = 0;
2145
2146 /* prime the data phase */
2147 if (!req_to_dtd(req))
2148 status = queue_dtd(ep, req);
2149 else /* no mem */
2150 goto stall;
2151
2152 if (status) {
2153 ERROR(dev, "response error on GET_STATUS request\n");
2154 goto stall;
2155 }
2156
2157 list_add_tail(&req->queue, &ep->queue);
2158 dev->ep0_state = DATA_STATE_XMIT;
2159
2160 VDBG(dev, "<--- %s()\n", __func__);
2161 return;
2162 stall:
2163 ep0_stall(dev);
2164 VDBG(dev, "<--- %s()\n", __func__);
2165 }
2166
2167
2168 /* setup packet interrupt handler */
2169 static void handle_setup_packet(struct langwell_udc *dev,
2170 struct usb_ctrlrequest *setup)
2171 {
2172 u16 wValue = le16_to_cpu(setup->wValue);
2173 u16 wIndex = le16_to_cpu(setup->wIndex);
2174 u16 wLength = le16_to_cpu(setup->wLength);
2175
2176 VDBG(dev, "---> %s()\n", __func__);
2177
2178 /* ep0 fifo flush */
2179 nuke(&dev->ep[0], -ESHUTDOWN);
2180
2181 DBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
2182 setup->bRequestType, setup->bRequest,
2183 wValue, wIndex, wLength);
2184
2185 /* RNDIS gadget delegate */
2186 if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
2187 /* USB_CDC_SEND_ENCAPSULATED_COMMAND */
2188 goto delegate;
2189 }
2190
2191 /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
2192 if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
2193 /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
2194 goto delegate;
2195 }
2196
2197 /* We process some stardard setup requests here */
2198 switch (setup->bRequest) {
2199 case USB_REQ_GET_STATUS:
2200 DBG(dev, "SETUP: USB_REQ_GET_STATUS\n");
2201 /* get status, DATA and STATUS phase */
2202 if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
2203 != (USB_DIR_IN | USB_TYPE_STANDARD))
2204 break;
2205 get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
2206 goto end;
2207
2208 case USB_REQ_SET_ADDRESS:
2209 DBG(dev, "SETUP: USB_REQ_SET_ADDRESS\n");
2210 /* STATUS phase */
2211 if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
2212 | USB_RECIP_DEVICE))
2213 break;
2214 set_address(dev, wValue, wIndex, wLength);
2215 goto end;
2216
2217 case USB_REQ_CLEAR_FEATURE:
2218 case USB_REQ_SET_FEATURE:
2219 /* STATUS phase */
2220 {
2221 int rc = -EOPNOTSUPP;
2222 if (setup->bRequest == USB_REQ_SET_FEATURE)
2223 DBG(dev, "SETUP: USB_REQ_SET_FEATURE\n");
2224 else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
2225 DBG(dev, "SETUP: USB_REQ_CLEAR_FEATURE\n");
2226
2227 if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
2228 == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
2229 struct langwell_ep *epn;
2230 epn = get_ep_by_windex(dev, wIndex);
2231 /* stall if endpoint doesn't exist */
2232 if (!epn) {
2233 ep0_stall(dev);
2234 goto end;
2235 }
2236
2237 if (wValue != 0 || wLength != 0
2238 || epn->ep_num > dev->ep_max)
2239 break;
2240
2241 spin_unlock(&dev->lock);
2242 rc = langwell_ep_set_halt(&epn->ep,
2243 (setup->bRequest == USB_REQ_SET_FEATURE)
2244 ? 1 : 0);
2245 spin_lock(&dev->lock);
2246
2247 } else if ((setup->bRequestType & (USB_RECIP_MASK
2248 | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
2249 | USB_TYPE_STANDARD)) {
2250 if (!gadget_is_otg(&dev->gadget))
2251 break;
2252 else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
2253 dev->gadget.b_hnp_enable = 1;
2254 #ifdef OTG_TRANSCEIVER
2255 if (!dev->lotg->otg.default_a)
2256 dev->lotg->hsm.b_hnp_enable = 1;
2257 #endif
2258 } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
2259 dev->gadget.a_hnp_support = 1;
2260 else if (setup->bRequest ==
2261 USB_DEVICE_A_ALT_HNP_SUPPORT)
2262 dev->gadget.a_alt_hnp_support = 1;
2263 else
2264 break;
2265 rc = 0;
2266 } else
2267 break;
2268
2269 if (rc == 0) {
2270 if (prime_status_phase(dev, EP_DIR_IN))
2271 ep0_stall(dev);
2272 }
2273 goto end;
2274 }
2275
2276 case USB_REQ_GET_DESCRIPTOR:
2277 DBG(dev, "SETUP: USB_REQ_GET_DESCRIPTOR\n");
2278 goto delegate;
2279
2280 case USB_REQ_SET_DESCRIPTOR:
2281 DBG(dev, "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
2282 goto delegate;
2283
2284 case USB_REQ_GET_CONFIGURATION:
2285 DBG(dev, "SETUP: USB_REQ_GET_CONFIGURATION\n");
2286 goto delegate;
2287
2288 case USB_REQ_SET_CONFIGURATION:
2289 DBG(dev, "SETUP: USB_REQ_SET_CONFIGURATION\n");
2290 goto delegate;
2291
2292 case USB_REQ_GET_INTERFACE:
2293 DBG(dev, "SETUP: USB_REQ_GET_INTERFACE\n");
2294 goto delegate;
2295
2296 case USB_REQ_SET_INTERFACE:
2297 DBG(dev, "SETUP: USB_REQ_SET_INTERFACE\n");
2298 goto delegate;
2299
2300 case USB_REQ_SYNCH_FRAME:
2301 DBG(dev, "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
2302 goto delegate;
2303
2304 default:
2305 /* delegate USB standard requests to the gadget driver */
2306 goto delegate;
2307 delegate:
2308 /* USB requests handled by gadget */
2309 if (wLength) {
2310 /* DATA phase from gadget, STATUS phase from udc */
2311 dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
2312 ? USB_DIR_IN : USB_DIR_OUT;
2313 VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
2314 dev->ep0_dir, wLength);
2315 spin_unlock(&dev->lock);
2316 if (dev->driver->setup(&dev->gadget,
2317 &dev->local_setup_buff) < 0)
2318 ep0_stall(dev);
2319 spin_lock(&dev->lock);
2320 dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
2321 ? DATA_STATE_XMIT : DATA_STATE_RECV;
2322 } else {
2323 /* no DATA phase, IN STATUS phase from gadget */
2324 dev->ep0_dir = USB_DIR_IN;
2325 VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
2326 dev->ep0_dir, wLength);
2327 spin_unlock(&dev->lock);
2328 if (dev->driver->setup(&dev->gadget,
2329 &dev->local_setup_buff) < 0)
2330 ep0_stall(dev);
2331 spin_lock(&dev->lock);
2332 dev->ep0_state = WAIT_FOR_OUT_STATUS;
2333 }
2334 break;
2335 }
2336 end:
2337 VDBG(dev, "<--- %s()\n", __func__);
2338 return;
2339 }
2340
2341
2342 /* transfer completion, process endpoint request and free the completed dTDs
2343 * for this request
2344 */
2345 static int process_ep_req(struct langwell_udc *dev, int index,
2346 struct langwell_request *curr_req)
2347 {
2348 struct langwell_dtd *curr_dtd;
2349 struct langwell_dqh *curr_dqh;
2350 int td_complete, actual, remaining_length;
2351 int i, dir;
2352 u8 dtd_status = 0;
2353 int retval = 0;
2354
2355 curr_dqh = &dev->ep_dqh[index];
2356 dir = index % 2;
2357
2358 curr_dtd = curr_req->head;
2359 td_complete = 0;
2360 actual = curr_req->req.length;
2361
2362 VDBG(dev, "---> %s()\n", __func__);
2363
2364 for (i = 0; i < curr_req->dtd_count; i++) {
2365 remaining_length = le16_to_cpu(curr_dtd->dtd_total);
2366 actual -= remaining_length;
2367
2368 /* command execution states by dTD */
2369 dtd_status = curr_dtd->dtd_status;
2370
2371 if (!dtd_status) {
2372 /* transfers completed successfully */
2373 if (!remaining_length) {
2374 td_complete++;
2375 VDBG(dev, "dTD transmitted successfully\n");
2376 } else {
2377 if (dir) {
2378 VDBG(dev, "TX dTD remains data\n");
2379 retval = -EPROTO;
2380 break;
2381
2382 } else {
2383 td_complete++;
2384 break;
2385 }
2386 }
2387 } else {
2388 /* transfers completed with errors */
2389 if (dtd_status & DTD_STS_ACTIVE) {
2390 DBG(dev, "request not completed\n");
2391 retval = 1;
2392 return retval;
2393 } else if (dtd_status & DTD_STS_HALTED) {
2394 ERROR(dev, "dTD error %08x dQH[%d]\n",
2395 dtd_status, index);
2396 /* clear the errors and halt condition */
2397 curr_dqh->dtd_status = 0;
2398 retval = -EPIPE;
2399 break;
2400 } else if (dtd_status & DTD_STS_DBE) {
2401 DBG(dev, "data buffer (overflow) error\n");
2402 retval = -EPROTO;
2403 break;
2404 } else if (dtd_status & DTD_STS_TRE) {
2405 DBG(dev, "transaction(ISO) error\n");
2406 retval = -EILSEQ;
2407 break;
2408 } else
2409 ERROR(dev, "unknown error (0x%x)!\n",
2410 dtd_status);
2411 }
2412
2413 if (i != curr_req->dtd_count - 1)
2414 curr_dtd = (struct langwell_dtd *)
2415 curr_dtd->next_dtd_virt;
2416 }
2417
2418 if (retval)
2419 return retval;
2420
2421 curr_req->req.actual = actual;
2422
2423 VDBG(dev, "<--- %s()\n", __func__);
2424 return 0;
2425 }
2426
2427
2428 /* complete DATA or STATUS phase of ep0 prime status phase if needed */
2429 static void ep0_req_complete(struct langwell_udc *dev,
2430 struct langwell_ep *ep0, struct langwell_request *req)
2431 {
2432 u32 new_addr;
2433 VDBG(dev, "---> %s()\n", __func__);
2434
2435 if (dev->usb_state == USB_STATE_ADDRESS) {
2436 /* set the new address */
2437 new_addr = (u32)dev->dev_addr;
2438 writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
2439
2440 new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
2441 VDBG(dev, "new_addr = %d\n", new_addr);
2442 }
2443
2444 done(ep0, req, 0);
2445
2446 switch (dev->ep0_state) {
2447 case DATA_STATE_XMIT:
2448 /* receive status phase */
2449 if (prime_status_phase(dev, EP_DIR_OUT))
2450 ep0_stall(dev);
2451 break;
2452 case DATA_STATE_RECV:
2453 /* send status phase */
2454 if (prime_status_phase(dev, EP_DIR_IN))
2455 ep0_stall(dev);
2456 break;
2457 case WAIT_FOR_OUT_STATUS:
2458 dev->ep0_state = WAIT_FOR_SETUP;
2459 break;
2460 case WAIT_FOR_SETUP:
2461 ERROR(dev, "unexpect ep0 packets\n");
2462 break;
2463 default:
2464 ep0_stall(dev);
2465 break;
2466 }
2467
2468 VDBG(dev, "<--- %s()\n", __func__);
2469 }
2470
2471
2472 /* USB transfer completion interrupt */
2473 static void handle_trans_complete(struct langwell_udc *dev)
2474 {
2475 u32 complete_bits;
2476 int i, ep_num, dir, bit_mask, status;
2477 struct langwell_ep *epn;
2478 struct langwell_request *curr_req, *temp_req;
2479
2480 VDBG(dev, "---> %s()\n", __func__);
2481
2482 complete_bits = readl(&dev->op_regs->endptcomplete);
2483 VDBG(dev, "endptcomplete register: 0x%08x\n", complete_bits);
2484
2485 /* Write-Clear the bits in endptcomplete register */
2486 writel(complete_bits, &dev->op_regs->endptcomplete);
2487
2488 if (!complete_bits) {
2489 DBG(dev, "complete_bits = 0\n");
2490 goto done;
2491 }
2492
2493 for (i = 0; i < dev->ep_max; i++) {
2494 ep_num = i / 2;
2495 dir = i % 2;
2496
2497 bit_mask = 1 << (ep_num + 16 * dir);
2498
2499 if (!(complete_bits & bit_mask))
2500 continue;
2501
2502 /* ep0 */
2503 if (i == 1)
2504 epn = &dev->ep[0];
2505 else
2506 epn = &dev->ep[i];
2507
2508 if (epn->name == NULL) {
2509 WARNING(dev, "invalid endpoint\n");
2510 continue;
2511 }
2512
2513 if (i < 2)
2514 /* ep0 in and out */
2515 DBG(dev, "%s-%s transfer completed\n",
2516 epn->name,
2517 is_in(epn) ? "in" : "out");
2518 else
2519 DBG(dev, "%s transfer completed\n", epn->name);
2520
2521 /* process the req queue until an uncomplete request */
2522 list_for_each_entry_safe(curr_req, temp_req,
2523 &epn->queue, queue) {
2524 status = process_ep_req(dev, i, curr_req);
2525 VDBG(dev, "%s req status: %d\n", epn->name, status);
2526
2527 if (status)
2528 break;
2529
2530 /* write back status to req */
2531 curr_req->req.status = status;
2532
2533 /* ep0 request completion */
2534 if (ep_num == 0) {
2535 ep0_req_complete(dev, epn, curr_req);
2536 break;
2537 } else {
2538 done(epn, curr_req, status);
2539 }
2540 }
2541 }
2542 done:
2543 VDBG(dev, "<--- %s()\n", __func__);
2544 return;
2545 }
2546
2547
2548 /* port change detect interrupt handler */
2549 static void handle_port_change(struct langwell_udc *dev)
2550 {
2551 u32 portsc1, devlc;
2552 u32 speed;
2553
2554 VDBG(dev, "---> %s()\n", __func__);
2555
2556 if (dev->bus_reset)
2557 dev->bus_reset = 0;
2558
2559 portsc1 = readl(&dev->op_regs->portsc1);
2560 devlc = readl(&dev->op_regs->devlc);
2561 VDBG(dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
2562 portsc1, devlc);
2563
2564 /* bus reset is finished */
2565 if (!(portsc1 & PORTS_PR)) {
2566 /* get the speed */
2567 speed = LPM_PSPD(devlc);
2568 switch (speed) {
2569 case LPM_SPEED_HIGH:
2570 dev->gadget.speed = USB_SPEED_HIGH;
2571 break;
2572 case LPM_SPEED_FULL:
2573 dev->gadget.speed = USB_SPEED_FULL;
2574 break;
2575 case LPM_SPEED_LOW:
2576 dev->gadget.speed = USB_SPEED_LOW;
2577 break;
2578 default:
2579 dev->gadget.speed = USB_SPEED_UNKNOWN;
2580 break;
2581 }
2582 VDBG(dev, "speed = %d, dev->gadget.speed = %d\n",
2583 speed, dev->gadget.speed);
2584 }
2585
2586 /* LPM L0 to L1 */
2587 if (dev->lpm && dev->lpm_state == LPM_L0)
2588 if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
2589 INFO(dev, "LPM L0 to L1\n");
2590 dev->lpm_state = LPM_L1;
2591 }
2592
2593 /* LPM L1 to L0, force resume or remote wakeup finished */
2594 if (dev->lpm && dev->lpm_state == LPM_L1)
2595 if (!(portsc1 & PORTS_SUSP)) {
2596 if (portsc1 & PORTS_SLP)
2597 INFO(dev, "LPM L1 to L0, force resume\n");
2598 else
2599 INFO(dev, "LPM L1 to L0, remote wakeup\n");
2600
2601 dev->lpm_state = LPM_L0;
2602 }
2603
2604 /* update USB state */
2605 if (!dev->resume_state)
2606 dev->usb_state = USB_STATE_DEFAULT;
2607
2608 VDBG(dev, "<--- %s()\n", __func__);
2609 }
2610
2611
2612 /* USB reset interrupt handler */
2613 static void handle_usb_reset(struct langwell_udc *dev)
2614 {
2615 u32 deviceaddr,
2616 endptsetupstat,
2617 endptcomplete;
2618 unsigned long timeout;
2619
2620 VDBG(dev, "---> %s()\n", __func__);
2621
2622 /* Write-Clear the device address */
2623 deviceaddr = readl(&dev->op_regs->deviceaddr);
2624 writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
2625
2626 dev->dev_addr = 0;
2627
2628 /* clear usb state */
2629 dev->resume_state = 0;
2630
2631 /* LPM L1 to L0, reset */
2632 if (dev->lpm)
2633 dev->lpm_state = LPM_L0;
2634
2635 dev->ep0_dir = USB_DIR_OUT;
2636 dev->ep0_state = WAIT_FOR_SETUP;
2637 dev->remote_wakeup = 0; /* default to 0 on reset */
2638 dev->gadget.b_hnp_enable = 0;
2639 dev->gadget.a_hnp_support = 0;
2640 dev->gadget.a_alt_hnp_support = 0;
2641
2642 /* Write-Clear all the setup token semaphores */
2643 endptsetupstat = readl(&dev->op_regs->endptsetupstat);
2644 writel(endptsetupstat, &dev->op_regs->endptsetupstat);
2645
2646 /* Write-Clear all the endpoint complete status bits */
2647 endptcomplete = readl(&dev->op_regs->endptcomplete);
2648 writel(endptcomplete, &dev->op_regs->endptcomplete);
2649
2650 /* wait until all endptprime bits cleared */
2651 timeout = jiffies + PRIME_TIMEOUT;
2652 while (readl(&dev->op_regs->endptprime)) {
2653 if (time_after(jiffies, timeout)) {
2654 ERROR(dev, "USB reset timeout\n");
2655 break;
2656 }
2657 cpu_relax();
2658 }
2659
2660 /* write 1s to endptflush register to clear any primed buffers */
2661 writel((u32) ~0, &dev->op_regs->endptflush);
2662
2663 if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
2664 VDBG(dev, "USB bus reset\n");
2665 /* bus is reseting */
2666 dev->bus_reset = 1;
2667
2668 /* reset all the queues, stop all USB activities */
2669 stop_activity(dev, dev->driver);
2670 dev->usb_state = USB_STATE_DEFAULT;
2671 } else {
2672 VDBG(dev, "device controller reset\n");
2673 /* controller reset */
2674 langwell_udc_reset(dev);
2675
2676 /* reset all the queues, stop all USB activities */
2677 stop_activity(dev, dev->driver);
2678
2679 /* reset ep0 dQH and endptctrl */
2680 ep0_reset(dev);
2681
2682 /* enable interrupt and set controller to run state */
2683 langwell_udc_start(dev);
2684
2685 dev->usb_state = USB_STATE_ATTACHED;
2686 }
2687
2688 #ifdef OTG_TRANSCEIVER
2689 /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
2690 if (!dev->lotg->otg.default_a)
2691 dev->lotg->hsm.b_hnp_enable = 0;
2692 #endif
2693
2694 VDBG(dev, "<--- %s()\n", __func__);
2695 }
2696
2697
2698 /* USB bus suspend/resume interrupt */
2699 static void handle_bus_suspend(struct langwell_udc *dev)
2700 {
2701 u32 devlc;
2702 DBG(dev, "---> %s()\n", __func__);
2703
2704 dev->resume_state = dev->usb_state;
2705 dev->usb_state = USB_STATE_SUSPENDED;
2706
2707 #ifdef OTG_TRANSCEIVER
2708 if (dev->lotg->otg.default_a) {
2709 if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
2710 dev->lotg->hsm.b_bus_suspend = 1;
2711 /* notify transceiver the state changes */
2712 if (spin_trylock(&dev->lotg->wq_lock)) {
2713 langwell_update_transceiver();
2714 spin_unlock(&dev->lotg->wq_lock);
2715 }
2716 }
2717 dev->lotg->hsm.b_bus_suspend_vld++;
2718 } else {
2719 if (!dev->lotg->hsm.a_bus_suspend) {
2720 dev->lotg->hsm.a_bus_suspend = 1;
2721 /* notify transceiver the state changes */
2722 if (spin_trylock(&dev->lotg->wq_lock)) {
2723 langwell_update_transceiver();
2724 spin_unlock(&dev->lotg->wq_lock);
2725 }
2726 }
2727 }
2728 #endif
2729
2730 /* report suspend to the driver */
2731 if (dev->driver) {
2732 if (dev->driver->suspend) {
2733 spin_unlock(&dev->lock);
2734 dev->driver->suspend(&dev->gadget);
2735 spin_lock(&dev->lock);
2736 DBG(dev, "suspend %s\n", dev->driver->driver.name);
2737 }
2738 }
2739
2740 /* enter PHY low power suspend */
2741 devlc = readl(&dev->op_regs->devlc);
2742 VDBG(dev, "devlc = 0x%08x\n", devlc);
2743 devlc |= LPM_PHCD;
2744 writel(devlc, &dev->op_regs->devlc);
2745
2746 DBG(dev, "<--- %s()\n", __func__);
2747 }
2748
2749
2750 static void handle_bus_resume(struct langwell_udc *dev)
2751 {
2752 u32 devlc;
2753 DBG(dev, "---> %s()\n", __func__);
2754
2755 dev->usb_state = dev->resume_state;
2756 dev->resume_state = 0;
2757
2758 /* exit PHY low power suspend */
2759 devlc = readl(&dev->op_regs->devlc);
2760 VDBG(dev, "devlc = 0x%08x\n", devlc);
2761 devlc &= ~LPM_PHCD;
2762 writel(devlc, &dev->op_regs->devlc);
2763
2764 #ifdef OTG_TRANSCEIVER
2765 if (dev->lotg->otg.default_a == 0)
2766 dev->lotg->hsm.a_bus_suspend = 0;
2767 #endif
2768
2769 /* report resume to the driver */
2770 if (dev->driver) {
2771 if (dev->driver->resume) {
2772 spin_unlock(&dev->lock);
2773 dev->driver->resume(&dev->gadget);
2774 spin_lock(&dev->lock);
2775 DBG(dev, "resume %s\n", dev->driver->driver.name);
2776 }
2777 }
2778
2779 DBG(dev, "<--- %s()\n", __func__);
2780 }
2781
2782
2783 /* USB device controller interrupt handler */
2784 static irqreturn_t langwell_irq(int irq, void *_dev)
2785 {
2786 struct langwell_udc *dev = _dev;
2787 u32 usbsts,
2788 usbintr,
2789 irq_sts,
2790 portsc1;
2791
2792 VDBG(dev, "---> %s()\n", __func__);
2793
2794 if (dev->stopped) {
2795 VDBG(dev, "handle IRQ_NONE\n");
2796 VDBG(dev, "<--- %s()\n", __func__);
2797 return IRQ_NONE;
2798 }
2799
2800 spin_lock(&dev->lock);
2801
2802 /* USB status */
2803 usbsts = readl(&dev->op_regs->usbsts);
2804
2805 /* USB interrupt enable */
2806 usbintr = readl(&dev->op_regs->usbintr);
2807
2808 irq_sts = usbsts & usbintr;
2809 VDBG(dev, "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
2810 usbsts, usbintr, irq_sts);
2811
2812 if (!irq_sts) {
2813 VDBG(dev, "handle IRQ_NONE\n");
2814 VDBG(dev, "<--- %s()\n", __func__);
2815 spin_unlock(&dev->lock);
2816 return IRQ_NONE;
2817 }
2818
2819 /* Write-Clear interrupt status bits */
2820 writel(irq_sts, &dev->op_regs->usbsts);
2821
2822 /* resume from suspend */
2823 portsc1 = readl(&dev->op_regs->portsc1);
2824 if (dev->usb_state == USB_STATE_SUSPENDED)
2825 if (!(portsc1 & PORTS_SUSP))
2826 handle_bus_resume(dev);
2827
2828 /* USB interrupt */
2829 if (irq_sts & STS_UI) {
2830 VDBG(dev, "USB interrupt\n");
2831
2832 /* setup packet received from ep0 */
2833 if (readl(&dev->op_regs->endptsetupstat)
2834 & EP0SETUPSTAT_MASK) {
2835 VDBG(dev, "USB SETUP packet received interrupt\n");
2836 /* setup tripwire semaphone */
2837 setup_tripwire(dev);
2838 handle_setup_packet(dev, &dev->local_setup_buff);
2839 }
2840
2841 /* USB transfer completion */
2842 if (readl(&dev->op_regs->endptcomplete)) {
2843 VDBG(dev, "USB transfer completion interrupt\n");
2844 handle_trans_complete(dev);
2845 }
2846 }
2847
2848 /* SOF received interrupt (for ISO transfer) */
2849 if (irq_sts & STS_SRI) {
2850 /* FIXME */
2851 /* VDBG(dev, "SOF received interrupt\n"); */
2852 }
2853
2854 /* port change detect interrupt */
2855 if (irq_sts & STS_PCI) {
2856 VDBG(dev, "port change detect interrupt\n");
2857 handle_port_change(dev);
2858 }
2859
2860 /* suspend interrrupt */
2861 if (irq_sts & STS_SLI) {
2862 VDBG(dev, "suspend interrupt\n");
2863 handle_bus_suspend(dev);
2864 }
2865
2866 /* USB reset interrupt */
2867 if (irq_sts & STS_URI) {
2868 VDBG(dev, "USB reset interrupt\n");
2869 handle_usb_reset(dev);
2870 }
2871
2872 /* USB error or system error interrupt */
2873 if (irq_sts & (STS_UEI | STS_SEI)) {
2874 /* FIXME */
2875 WARNING(dev, "error IRQ, irq_sts: %x\n", irq_sts);
2876 }
2877
2878 spin_unlock(&dev->lock);
2879
2880 VDBG(dev, "<--- %s()\n", __func__);
2881 return IRQ_HANDLED;
2882 }
2883
2884
2885 /*-------------------------------------------------------------------------*/
2886
2887 /* release device structure */
2888 static void gadget_release(struct device *_dev)
2889 {
2890 struct langwell_udc *dev = the_controller;
2891
2892 DBG(dev, "---> %s()\n", __func__);
2893
2894 complete(dev->done);
2895
2896 DBG(dev, "<--- %s()\n", __func__);
2897 kfree(dev);
2898 }
2899
2900
2901 /* tear down the binding between this driver and the pci device */
2902 static void langwell_udc_remove(struct pci_dev *pdev)
2903 {
2904 struct langwell_udc *dev = the_controller;
2905
2906 DECLARE_COMPLETION(done);
2907
2908 BUG_ON(dev->driver);
2909 DBG(dev, "---> %s()\n", __func__);
2910
2911 dev->done = &done;
2912
2913 /* free memory allocated in probe */
2914 if (dev->dtd_pool)
2915 dma_pool_destroy(dev->dtd_pool);
2916
2917 if (dev->status_req) {
2918 kfree(dev->status_req->req.buf);
2919 kfree(dev->status_req);
2920 }
2921
2922 if (dev->ep_dqh)
2923 dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
2924 dev->ep_dqh, dev->ep_dqh_dma);
2925
2926 kfree(dev->ep);
2927
2928 /* diable IRQ handler */
2929 if (dev->got_irq)
2930 free_irq(pdev->irq, dev);
2931
2932 #ifndef OTG_TRANSCEIVER
2933 if (dev->cap_regs)
2934 iounmap(dev->cap_regs);
2935
2936 if (dev->region)
2937 release_mem_region(pci_resource_start(pdev, 0),
2938 pci_resource_len(pdev, 0));
2939
2940 if (dev->enabled)
2941 pci_disable_device(pdev);
2942 #else
2943 if (dev->transceiver) {
2944 otg_put_transceiver(dev->transceiver);
2945 dev->transceiver = NULL;
2946 dev->lotg = NULL;
2947 }
2948 #endif
2949
2950 dev->cap_regs = NULL;
2951
2952 INFO(dev, "unbind\n");
2953 DBG(dev, "<--- %s()\n", __func__);
2954
2955 device_unregister(&dev->gadget.dev);
2956 device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
2957
2958 #ifndef OTG_TRANSCEIVER
2959 pci_set_drvdata(pdev, NULL);
2960 #endif
2961
2962 /* free dev, wait for the release() finished */
2963 wait_for_completion(&done);
2964
2965 the_controller = NULL;
2966 }
2967
2968
2969 /*
2970 * wrap this driver around the specified device, but
2971 * don't respond over USB until a gadget driver binds to us.
2972 */
2973 static int langwell_udc_probe(struct pci_dev *pdev,
2974 const struct pci_device_id *id)
2975 {
2976 struct langwell_udc *dev;
2977 #ifndef OTG_TRANSCEIVER
2978 unsigned long resource, len;
2979 #endif
2980 void __iomem *base = NULL;
2981 size_t size;
2982 int retval;
2983
2984 if (the_controller) {
2985 dev_warn(&pdev->dev, "ignoring\n");
2986 return -EBUSY;
2987 }
2988
2989 /* alloc, and start init */
2990 dev = kzalloc(sizeof *dev, GFP_KERNEL);
2991 if (dev == NULL) {
2992 retval = -ENOMEM;
2993 goto error;
2994 }
2995
2996 /* initialize device spinlock */
2997 spin_lock_init(&dev->lock);
2998
2999 dev->pdev = pdev;
3000 DBG(dev, "---> %s()\n", __func__);
3001
3002 #ifdef OTG_TRANSCEIVER
3003 /* PCI device is already enabled by otg_transceiver driver */
3004 dev->enabled = 1;
3005
3006 /* mem region and register base */
3007 dev->region = 1;
3008 dev->transceiver = otg_get_transceiver();
3009 dev->lotg = otg_to_langwell(dev->transceiver);
3010 base = dev->lotg->regs;
3011 #else
3012 pci_set_drvdata(pdev, dev);
3013
3014 /* now all the pci goodies ... */
3015 if (pci_enable_device(pdev) < 0) {
3016 retval = -ENODEV;
3017 goto error;
3018 }
3019 dev->enabled = 1;
3020
3021 /* control register: BAR 0 */
3022 resource = pci_resource_start(pdev, 0);
3023 len = pci_resource_len(pdev, 0);
3024 if (!request_mem_region(resource, len, driver_name)) {
3025 ERROR(dev, "controller already in use\n");
3026 retval = -EBUSY;
3027 goto error;
3028 }
3029 dev->region = 1;
3030
3031 base = ioremap_nocache(resource, len);
3032 #endif
3033 if (base == NULL) {
3034 ERROR(dev, "can't map memory\n");
3035 retval = -EFAULT;
3036 goto error;
3037 }
3038
3039 dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
3040 VDBG(dev, "dev->cap_regs: %p\n", dev->cap_regs);
3041 dev->op_regs = (struct langwell_op_regs __iomem *)
3042 (base + OP_REG_OFFSET);
3043 VDBG(dev, "dev->op_regs: %p\n", dev->op_regs);
3044
3045 /* irq setup after old hardware is cleaned up */
3046 if (!pdev->irq) {
3047 ERROR(dev, "No IRQ. Check PCI setup!\n");
3048 retval = -ENODEV;
3049 goto error;
3050 }
3051
3052 #ifndef OTG_TRANSCEIVER
3053 INFO(dev, "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
3054 pdev->irq, resource, len, base);
3055 /* enables bus-mastering for device dev */
3056 pci_set_master(pdev);
3057
3058 if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
3059 driver_name, dev) != 0) {
3060 ERROR(dev, "request interrupt %d failed\n", pdev->irq);
3061 retval = -EBUSY;
3062 goto error;
3063 }
3064 dev->got_irq = 1;
3065 #endif
3066
3067 /* set stopped bit */
3068 dev->stopped = 1;
3069
3070 /* capabilities and endpoint number */
3071 dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
3072 dev->dciversion = readw(&dev->cap_regs->dciversion);
3073 dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
3074 VDBG(dev, "dev->lpm: %d\n", dev->lpm);
3075 VDBG(dev, "dev->dciversion: 0x%04x\n", dev->dciversion);
3076 VDBG(dev, "dccparams: 0x%08x\n", readl(&dev->cap_regs->dccparams));
3077 VDBG(dev, "dev->devcap: %d\n", dev->devcap);
3078 if (!dev->devcap) {
3079 ERROR(dev, "can't support device mode\n");
3080 retval = -ENODEV;
3081 goto error;
3082 }
3083
3084 /* a pair of endpoints (out/in) for each address */
3085 dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
3086 VDBG(dev, "dev->ep_max: %d\n", dev->ep_max);
3087
3088 /* allocate endpoints memory */
3089 dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
3090 GFP_KERNEL);
3091 if (!dev->ep) {
3092 ERROR(dev, "allocate endpoints memory failed\n");
3093 retval = -ENOMEM;
3094 goto error;
3095 }
3096
3097 /* allocate device dQH memory */
3098 size = dev->ep_max * sizeof(struct langwell_dqh);
3099 VDBG(dev, "orig size = %d\n", size);
3100 if (size < DQH_ALIGNMENT)
3101 size = DQH_ALIGNMENT;
3102 else if ((size % DQH_ALIGNMENT) != 0) {
3103 size += DQH_ALIGNMENT + 1;
3104 size &= ~(DQH_ALIGNMENT - 1);
3105 }
3106 dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
3107 &dev->ep_dqh_dma, GFP_KERNEL);
3108 if (!dev->ep_dqh) {
3109 ERROR(dev, "allocate dQH memory failed\n");
3110 retval = -ENOMEM;
3111 goto error;
3112 }
3113 dev->ep_dqh_size = size;
3114 VDBG(dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
3115
3116 /* initialize ep0 status request structure */
3117 dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
3118 if (!dev->status_req) {
3119 ERROR(dev, "allocate status_req memory failed\n");
3120 retval = -ENOMEM;
3121 goto error;
3122 }
3123 INIT_LIST_HEAD(&dev->status_req->queue);
3124
3125 /* allocate a small amount of memory to get valid address */
3126 dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
3127 dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
3128
3129 dev->resume_state = USB_STATE_NOTATTACHED;
3130 dev->usb_state = USB_STATE_POWERED;
3131 dev->ep0_dir = USB_DIR_OUT;
3132 dev->remote_wakeup = 0; /* default to 0 on reset */
3133
3134 #ifndef OTG_TRANSCEIVER
3135 /* reset device controller */
3136 langwell_udc_reset(dev);
3137 #endif
3138
3139 /* initialize gadget structure */
3140 dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
3141 dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
3142 INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
3143 dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
3144 dev->gadget.is_dualspeed = 1; /* support dual speed */
3145 #ifdef OTG_TRANSCEIVER
3146 dev->gadget.is_otg = 1; /* support otg mode */
3147 #endif
3148
3149 /* the "gadget" abstracts/virtualizes the controller */
3150 dev_set_name(&dev->gadget.dev, "gadget");
3151 dev->gadget.dev.parent = &pdev->dev;
3152 dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
3153 dev->gadget.dev.release = gadget_release;
3154 dev->gadget.name = driver_name; /* gadget name */
3155
3156 /* controller endpoints reinit */
3157 eps_reinit(dev);
3158
3159 #ifndef OTG_TRANSCEIVER
3160 /* reset ep0 dQH and endptctrl */
3161 ep0_reset(dev);
3162 #endif
3163
3164 /* create dTD dma_pool resource */
3165 dev->dtd_pool = dma_pool_create("langwell_dtd",
3166 &dev->pdev->dev,
3167 sizeof(struct langwell_dtd),
3168 DTD_ALIGNMENT,
3169 DMA_BOUNDARY);
3170
3171 if (!dev->dtd_pool) {
3172 retval = -ENOMEM;
3173 goto error;
3174 }
3175
3176 /* done */
3177 INFO(dev, "%s\n", driver_desc);
3178 INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
3179 INFO(dev, "Driver version: " DRIVER_VERSION "\n");
3180 INFO(dev, "Support (max) %d endpoints\n", dev->ep_max);
3181 INFO(dev, "Device interface version: 0x%04x\n", dev->dciversion);
3182 INFO(dev, "Controller mode: %s\n", dev->devcap ? "Device" : "Host");
3183 INFO(dev, "Support USB LPM: %s\n", dev->lpm ? "Yes" : "No");
3184
3185 VDBG(dev, "After langwell_udc_probe(), print all registers:\n");
3186 #ifdef VERBOSE
3187 print_all_registers(dev);
3188 #endif
3189
3190 the_controller = dev;
3191
3192 retval = device_register(&dev->gadget.dev);
3193 if (retval)
3194 goto error;
3195
3196 retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
3197 if (retval)
3198 goto error;
3199
3200 VDBG(dev, "<--- %s()\n", __func__);
3201 return 0;
3202
3203 error:
3204 if (dev) {
3205 DBG(dev, "<--- %s()\n", __func__);
3206 langwell_udc_remove(pdev);
3207 }
3208
3209 return retval;
3210 }
3211
3212
3213 /* device controller suspend */
3214 static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
3215 {
3216 struct langwell_udc *dev = the_controller;
3217 u32 devlc;
3218
3219 DBG(dev, "---> %s()\n", __func__);
3220
3221 /* disable interrupt and set controller to stop state */
3222 langwell_udc_stop(dev);
3223
3224 /* diable IRQ handler */
3225 if (dev->got_irq)
3226 free_irq(pdev->irq, dev);
3227 dev->got_irq = 0;
3228
3229
3230 /* save PCI state */
3231 pci_save_state(pdev);
3232
3233 /* set device power state */
3234 pci_set_power_state(pdev, PCI_D3hot);
3235
3236 /* enter PHY low power suspend */
3237 devlc = readl(&dev->op_regs->devlc);
3238 VDBG(dev, "devlc = 0x%08x\n", devlc);
3239 devlc |= LPM_PHCD;
3240 writel(devlc, &dev->op_regs->devlc);
3241
3242 DBG(dev, "<--- %s()\n", __func__);
3243 return 0;
3244 }
3245
3246
3247 /* device controller resume */
3248 static int langwell_udc_resume(struct pci_dev *pdev)
3249 {
3250 struct langwell_udc *dev = the_controller;
3251 u32 devlc;
3252
3253 DBG(dev, "---> %s()\n", __func__);
3254
3255 /* exit PHY low power suspend */
3256 devlc = readl(&dev->op_regs->devlc);
3257 VDBG(dev, "devlc = 0x%08x\n", devlc);
3258 devlc &= ~LPM_PHCD;
3259 writel(devlc, &dev->op_regs->devlc);
3260
3261 /* set device D0 power state */
3262 pci_set_power_state(pdev, PCI_D0);
3263
3264 /* restore PCI state */
3265 pci_restore_state(pdev);
3266
3267 /* enable IRQ handler */
3268 if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, driver_name, dev)
3269 != 0) {
3270 ERROR(dev, "request interrupt %d failed\n", pdev->irq);
3271 return -1;
3272 }
3273 dev->got_irq = 1;
3274
3275 /* reset and start controller to run state */
3276 if (dev->stopped) {
3277 /* reset device controller */
3278 langwell_udc_reset(dev);
3279
3280 /* reset ep0 dQH and endptctrl */
3281 ep0_reset(dev);
3282
3283 /* start device if gadget is loaded */
3284 if (dev->driver)
3285 langwell_udc_start(dev);
3286 }
3287
3288 /* reset USB status */
3289 dev->usb_state = USB_STATE_ATTACHED;
3290 dev->ep0_state = WAIT_FOR_SETUP;
3291 dev->ep0_dir = USB_DIR_OUT;
3292
3293 DBG(dev, "<--- %s()\n", __func__);
3294 return 0;
3295 }
3296
3297
3298 /* pci driver shutdown */
3299 static void langwell_udc_shutdown(struct pci_dev *pdev)
3300 {
3301 struct langwell_udc *dev = the_controller;
3302 u32 usbmode;
3303
3304 DBG(dev, "---> %s()\n", __func__);
3305
3306 /* reset controller mode to IDLE */
3307 usbmode = readl(&dev->op_regs->usbmode);
3308 DBG(dev, "usbmode = 0x%08x\n", usbmode);
3309 usbmode &= (~3 | MODE_IDLE);
3310 writel(usbmode, &dev->op_regs->usbmode);
3311
3312 DBG(dev, "<--- %s()\n", __func__);
3313 }
3314
3315 /*-------------------------------------------------------------------------*/
3316
3317 static const struct pci_device_id pci_ids[] = { {
3318 .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
3319 .class_mask = ~0,
3320 .vendor = 0x8086,
3321 .device = 0x0811,
3322 .subvendor = PCI_ANY_ID,
3323 .subdevice = PCI_ANY_ID,
3324 }, { /* end: all zeroes */ }
3325 };
3326
3327
3328 MODULE_DEVICE_TABLE(pci, pci_ids);
3329
3330
3331 static struct pci_driver langwell_pci_driver = {
3332 .name = (char *) driver_name,
3333 .id_table = pci_ids,
3334
3335 .probe = langwell_udc_probe,
3336 .remove = langwell_udc_remove,
3337
3338 /* device controller suspend/resume */
3339 .suspend = langwell_udc_suspend,
3340 .resume = langwell_udc_resume,
3341
3342 .shutdown = langwell_udc_shutdown,
3343 };
3344
3345
3346 MODULE_DESCRIPTION(DRIVER_DESC);
3347 MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
3348 MODULE_VERSION(DRIVER_VERSION);
3349 MODULE_LICENSE("GPL");
3350
3351
3352 static int __init init(void)
3353 {
3354 #ifdef OTG_TRANSCEIVER
3355 return langwell_register_peripheral(&langwell_pci_driver);
3356 #else
3357 return pci_register_driver(&langwell_pci_driver);
3358 #endif
3359 }
3360 module_init(init);
3361
3362
3363 static void __exit cleanup(void)
3364 {
3365 #ifdef OTG_TRANSCEIVER
3366 return langwell_unregister_peripheral(&langwell_pci_driver);
3367 #else
3368 pci_unregister_driver(&langwell_pci_driver);
3369 #endif
3370 }
3371 module_exit(cleanup);
3372
mm of the moment repository