mm-only debug patch...
[mmotm.git] / drivers / leds / leds-pca9532.c
blobadc561eb59d2ed022873bacf35501b9462e19bbc
1 /*
2 * pca9532.c - 16-bit Led dimmer
4 * Copyright (C) 2008 Riku Voipio
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
14 #include <linux/module.h>
15 #include <linux/i2c.h>
16 #include <linux/leds.h>
17 #include <linux/input.h>
18 #include <linux/mutex.h>
19 #include <linux/workqueue.h>
20 #include <linux/leds-pca9532.h>
22 #define PCA9532_REG_PSC(i) (0x2+(i)*2)
23 #define PCA9532_REG_PWM(i) (0x3+(i)*2)
24 #define PCA9532_REG_LS0 0x6
25 #define LED_REG(led) ((led>>2)+PCA9532_REG_LS0)
26 #define LED_NUM(led) (led & 0x3)
28 #define ldev_to_led(c) container_of(c, struct pca9532_led, ldev)
30 struct pca9532_data {
31 struct i2c_client *client;
32 struct pca9532_led leds[16];
33 struct mutex update_lock;
34 struct input_dev *idev;
35 struct work_struct work;
36 u8 pwm[2];
37 u8 psc[2];
40 static int pca9532_probe(struct i2c_client *client,
41 const struct i2c_device_id *id);
42 static int pca9532_remove(struct i2c_client *client);
44 static const struct i2c_device_id pca9532_id[] = {
45 { "pca9532", 0 },
46 { }
49 MODULE_DEVICE_TABLE(i2c, pca9532_id);
51 static struct i2c_driver pca9532_driver = {
52 .driver = {
53 .name = "pca9532",
55 .probe = pca9532_probe,
56 .remove = pca9532_remove,
57 .id_table = pca9532_id,
60 /* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly,
61 * the clever Thecus people are using one pwm to drive the beeper. So,
62 * as a compromise we average one pwm to the values requested by all
63 * leds that are not ON/OFF.
64 * */
65 static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
66 enum led_brightness value)
68 int a = 0, b = 0, i = 0;
69 struct pca9532_data *data = i2c_get_clientdata(client);
70 for (i = 0; i < 16; i++) {
71 if (data->leds[i].type == PCA9532_TYPE_LED &&
72 data->leds[i].state == PCA9532_PWM0+pwm) {
73 a++;
74 b += data->leds[i].ldev.brightness;
77 if (a == 0) {
78 dev_err(&client->dev,
79 "fear of division by zero %d/%d, wanted %d\n",
80 b, a, value);
81 return -EINVAL;
83 b = b/a;
84 if (b > 0xFF)
85 return -EINVAL;
86 data->pwm[pwm] = b;
87 data->psc[pwm] = blink;
88 return 0;
91 static int pca9532_setpwm(struct i2c_client *client, int pwm)
93 struct pca9532_data *data = i2c_get_clientdata(client);
94 mutex_lock(&data->update_lock);
95 i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
96 data->pwm[pwm]);
97 i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
98 data->psc[pwm]);
99 mutex_unlock(&data->update_lock);
100 return 0;
103 /* Set LED routing */
104 static void pca9532_setled(struct pca9532_led *led)
106 struct i2c_client *client = led->client;
107 struct pca9532_data *data = i2c_get_clientdata(client);
108 char reg;
110 mutex_lock(&data->update_lock);
111 reg = i2c_smbus_read_byte_data(client, LED_REG(led->id));
112 /* zero led bits */
113 reg = reg & ~(0x3<<LED_NUM(led->id)*2);
114 /* set the new value */
115 reg = reg | (led->state << LED_NUM(led->id)*2);
116 i2c_smbus_write_byte_data(client, LED_REG(led->id), reg);
117 mutex_unlock(&data->update_lock);
120 static void pca9532_set_brightness(struct led_classdev *led_cdev,
121 enum led_brightness value)
123 int err = 0;
124 struct pca9532_led *led = ldev_to_led(led_cdev);
126 if (value == LED_OFF)
127 led->state = PCA9532_OFF;
128 else if (value == LED_FULL)
129 led->state = PCA9532_ON;
130 else {
131 led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
132 err = pca9532_calcpwm(led->client, 0, 0, value);
133 if (err)
134 return; /* XXX: led api doesn't allow error code? */
136 schedule_work(&led->work);
139 static int pca9532_set_blink(struct led_classdev *led_cdev,
140 unsigned long *delay_on, unsigned long *delay_off)
142 struct pca9532_led *led = ldev_to_led(led_cdev);
143 struct i2c_client *client = led->client;
144 int psc;
145 int err = 0;
147 if (*delay_on == 0 && *delay_off == 0) {
148 /* led subsystem ask us for a blink rate */
149 *delay_on = 1000;
150 *delay_off = 1000;
152 if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
153 return -EINVAL;
155 /* Thecus specific: only use PSC/PWM 0 */
156 psc = (*delay_on * 152-1)/1000;
157 err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
158 if (err)
159 return err;
160 schedule_work(&led->work);
161 return 0;
164 static int pca9532_event(struct input_dev *dev, unsigned int type,
165 unsigned int code, int value)
167 struct pca9532_data *data = input_get_drvdata(dev);
169 if (!(type == EV_SND && (code == SND_BELL || code == SND_TONE)))
170 return -1;
172 /* XXX: allow different kind of beeps with psc/pwm modifications */
173 if (value > 1 && value < 32767)
174 data->pwm[1] = 127;
175 else
176 data->pwm[1] = 0;
178 schedule_work(&data->work);
180 return 0;
183 static void pca9532_input_work(struct work_struct *work)
185 struct pca9532_data *data;
186 data = container_of(work, struct pca9532_data, work);
187 mutex_lock(&data->update_lock);
188 i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
189 data->pwm[1]);
190 mutex_unlock(&data->update_lock);
193 static void pca9532_led_work(struct work_struct *work)
195 struct pca9532_led *led;
196 led = container_of(work, struct pca9532_led, work);
197 if (led->state == PCA9532_PWM0)
198 pca9532_setpwm(led->client, 0);
199 pca9532_setled(led);
202 static int pca9532_configure(struct i2c_client *client,
203 struct pca9532_data *data, struct pca9532_platform_data *pdata)
205 int i, err = 0;
207 for (i = 0; i < 2; i++) {
208 data->pwm[i] = pdata->pwm[i];
209 data->psc[i] = pdata->psc[i];
210 i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i),
211 data->pwm[i]);
212 i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i),
213 data->psc[i]);
216 for (i = 0; i < 16; i++) {
217 struct pca9532_led *led = &data->leds[i];
218 struct pca9532_led *pled = &pdata->leds[i];
219 led->client = client;
220 led->id = i;
221 led->type = pled->type;
222 switch (led->type) {
223 case PCA9532_TYPE_NONE:
224 break;
225 case PCA9532_TYPE_LED:
226 led->state = pled->state;
227 led->name = pled->name;
228 led->ldev.name = led->name;
229 led->ldev.brightness = LED_OFF;
230 led->ldev.brightness_set = pca9532_set_brightness;
231 led->ldev.blink_set = pca9532_set_blink;
232 INIT_WORK(&led->work, pca9532_led_work);
233 err = led_classdev_register(&client->dev, &led->ldev);
234 if (err < 0) {
235 dev_err(&client->dev,
236 "couldn't register LED %s\n",
237 led->name);
238 goto exit;
240 pca9532_setled(led);
241 break;
242 case PCA9532_TYPE_N2100_BEEP:
243 BUG_ON(data->idev);
244 led->state = PCA9532_PWM1;
245 pca9532_setled(led);
246 data->idev = input_allocate_device();
247 if (data->idev == NULL) {
248 err = -ENOMEM;
249 goto exit;
251 data->idev->name = pled->name;
252 data->idev->phys = "i2c/pca9532";
253 data->idev->id.bustype = BUS_HOST;
254 data->idev->id.vendor = 0x001f;
255 data->idev->id.product = 0x0001;
256 data->idev->id.version = 0x0100;
257 data->idev->evbit[0] = BIT_MASK(EV_SND);
258 data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
259 BIT_MASK(SND_TONE);
260 data->idev->event = pca9532_event;
261 input_set_drvdata(data->idev, data);
262 INIT_WORK(&data->work, pca9532_input_work);
263 err = input_register_device(data->idev);
264 if (err) {
265 input_free_device(data->idev);
266 cancel_work_sync(&data->work);
267 data->idev = NULL;
268 goto exit;
270 break;
273 return 0;
275 exit:
276 if (i > 0)
277 for (i = i - 1; i >= 0; i--)
278 switch (data->leds[i].type) {
279 case PCA9532_TYPE_NONE:
280 break;
281 case PCA9532_TYPE_LED:
282 led_classdev_unregister(&data->leds[i].ldev);
283 cancel_work_sync(&data->leds[i].work);
284 break;
285 case PCA9532_TYPE_N2100_BEEP:
286 if (data->idev != NULL) {
287 input_unregister_device(data->idev);
288 input_free_device(data->idev);
289 cancel_work_sync(&data->work);
290 data->idev = NULL;
292 break;
295 return err;
298 static int pca9532_probe(struct i2c_client *client,
299 const struct i2c_device_id *id)
301 struct pca9532_data *data = i2c_get_clientdata(client);
302 struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data;
303 int err;
305 if (!pca9532_pdata)
306 return -EIO;
308 if (!i2c_check_functionality(client->adapter,
309 I2C_FUNC_SMBUS_BYTE_DATA))
310 return -EIO;
312 data = kzalloc(sizeof(*data), GFP_KERNEL);
313 if (!data)
314 return -ENOMEM;
316 dev_info(&client->dev, "setting platform data\n");
317 i2c_set_clientdata(client, data);
318 data->client = client;
319 mutex_init(&data->update_lock);
321 err = pca9532_configure(client, data, pca9532_pdata);
322 if (err) {
323 kfree(data);
324 i2c_set_clientdata(client, NULL);
327 return err;
330 static int pca9532_remove(struct i2c_client *client)
332 struct pca9532_data *data = i2c_get_clientdata(client);
333 int i;
334 for (i = 0; i < 16; i++)
335 switch (data->leds[i].type) {
336 case PCA9532_TYPE_NONE:
337 break;
338 case PCA9532_TYPE_LED:
339 led_classdev_unregister(&data->leds[i].ldev);
340 cancel_work_sync(&data->leds[i].work);
341 break;
342 case PCA9532_TYPE_N2100_BEEP:
343 if (data->idev != NULL) {
344 input_unregister_device(data->idev);
345 input_free_device(data->idev);
346 cancel_work_sync(&data->work);
347 data->idev = NULL;
349 break;
352 kfree(data);
353 i2c_set_clientdata(client, NULL);
354 return 0;
357 static int __init pca9532_init(void)
359 return i2c_add_driver(&pca9532_driver);
362 static void __exit pca9532_exit(void)
364 i2c_del_driver(&pca9532_driver);
367 MODULE_AUTHOR("Riku Voipio");
368 MODULE_LICENSE("GPL");
369 MODULE_DESCRIPTION("PCA 9532 LED dimmer");
371 module_init(pca9532_init);
372 module_exit(pca9532_exit);