mm-only debug patch...
[mmotm.git] / drivers / misc / hpilo.h
blob247eb386a9732d4fef9af461976958ef7866ee37
1 /*
2 * linux/drivers/char/hpilo.h
4 * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
5 * David Altobelli <david.altobelli@hp.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
11 #ifndef __HPILO_H
12 #define __HPILO_H
14 #define ILO_NAME "hpilo"
16 /* max number of open channel control blocks per device, hw limited to 32 */
17 #define MAX_CCB 8
18 /* max number of supported devices */
19 #define MAX_ILO_DEV 1
20 /* max number of files */
21 #define MAX_OPEN (MAX_CCB * MAX_ILO_DEV)
22 /* total wait time in usec */
23 #define MAX_WAIT_TIME 10000
24 /* per spin wait time in usec */
25 #define WAIT_TIME 10
26 /* spin counter for open/close delay */
27 #define MAX_WAIT (MAX_WAIT_TIME / WAIT_TIME)
30 * Per device, used to track global memory allocations.
32 struct ilo_hwinfo {
33 /* mmio registers on device */
34 char __iomem *mmio_vaddr;
36 /* doorbell registers on device */
37 char __iomem *db_vaddr;
39 /* shared memory on device used for channel control blocks */
40 char __iomem *ram_vaddr;
42 /* files corresponding to this device */
43 struct ccb_data *ccb_alloc[MAX_CCB];
45 struct pci_dev *ilo_dev;
48 * open_lock serializes ccb_cnt during open and close
49 * [ irq disabled ]
50 * -> alloc_lock used when adding/removing/searching ccb_alloc,
51 * which represents all ccbs open on the device
52 * --> fifo_lock controls access to fifo queues shared with hw
54 * Locks must be taken in this order, but open_lock and alloc_lock
55 * are optional, they do not need to be held in order to take a
56 * lower level lock.
58 spinlock_t open_lock;
59 spinlock_t alloc_lock;
60 spinlock_t fifo_lock;
62 struct cdev cdev;
65 /* offset from mmio_vaddr for enabling doorbell interrupts */
66 #define DB_IRQ 0xB2
67 /* offset from mmio_vaddr for outbound communications */
68 #define DB_OUT 0xD4
69 /* DB_OUT reset bit */
70 #define DB_RESET 26
73 * Channel control block. Used to manage hardware queues.
74 * The format must match hw's version. The hw ccb is 128 bytes,
75 * but the context area shouldn't be touched by the driver.
77 #define ILOSW_CCB_SZ 64
78 #define ILOHW_CCB_SZ 128
79 struct ccb {
80 union {
81 char *send_fifobar;
82 u64 padding1;
83 } ccb_u1;
84 union {
85 char *send_desc;
86 u64 padding2;
87 } ccb_u2;
88 u64 send_ctrl;
90 union {
91 char *recv_fifobar;
92 u64 padding3;
93 } ccb_u3;
94 union {
95 char *recv_desc;
96 u64 padding4;
97 } ccb_u4;
98 u64 recv_ctrl;
100 union {
101 char __iomem *db_base;
102 u64 padding5;
103 } ccb_u5;
105 u64 channel;
107 /* unused context area (64 bytes) */
110 /* ccb queue parameters */
111 #define SENDQ 1
112 #define RECVQ 2
113 #define NR_QENTRY 4
114 #define L2_QENTRY_SZ 12
116 /* ccb ctrl bitfields */
117 #define CTRL_BITPOS_L2SZ 0
118 #define CTRL_BITPOS_FIFOINDEXMASK 4
119 #define CTRL_BITPOS_DESCLIMIT 18
120 #define CTRL_BITPOS_A 30
121 #define CTRL_BITPOS_G 31
123 /* ccb doorbell macros */
124 #define L2_DB_SIZE 14
125 #define ONE_DB_SIZE (1 << L2_DB_SIZE)
128 * Per fd structure used to track the ccb allocated to that dev file.
130 struct ccb_data {
131 /* software version of ccb, using virtual addrs */
132 struct ccb driver_ccb;
134 /* hardware version of ccb, using physical addrs */
135 struct ccb ilo_ccb;
137 /* hardware ccb is written to this shared mapped device memory */
138 struct ccb __iomem *mapped_ccb;
140 /* dma'able memory used for send/recv queues */
141 void *dma_va;
142 dma_addr_t dma_pa;
143 size_t dma_size;
145 /* pointer to hardware device info */
146 struct ilo_hwinfo *ilo_hw;
148 /* queue for this ccb to wait for recv data */
149 wait_queue_head_t ccb_waitq;
151 /* usage count, to allow for shared ccb's */
152 int ccb_cnt;
154 /* open wanted exclusive access to this ccb */
155 int ccb_excl;
159 * FIFO queue structure, shared with hw.
161 #define ILO_START_ALIGN 4096
162 #define ILO_CACHE_SZ 128
163 struct fifo {
164 u64 nrents; /* user requested number of fifo entries */
165 u64 imask; /* mask to extract valid fifo index */
166 u64 merge; /* O/C bits to merge in during enqueue operation */
167 u64 reset; /* set to non-zero when the target device resets */
168 u8 pad_0[ILO_CACHE_SZ - (sizeof(u64) * 4)];
170 u64 head;
171 u8 pad_1[ILO_CACHE_SZ - (sizeof(u64))];
173 u64 tail;
174 u8 pad_2[ILO_CACHE_SZ - (sizeof(u64))];
176 u64 fifobar[1];
179 /* convert between struct fifo, and the fifobar, which is saved in the ccb */
180 #define FIFOHANDLESIZE (sizeof(struct fifo) - sizeof(u64))
181 #define FIFOBARTOHANDLE(_fifo) \
182 ((struct fifo *)(((char *)(_fifo)) - FIFOHANDLESIZE))
184 /* the number of qwords to consume from the entry descriptor */
185 #define ENTRY_BITPOS_QWORDS 0
186 /* descriptor index number (within a specified queue) */
187 #define ENTRY_BITPOS_DESCRIPTOR 10
188 /* state bit, fifo entry consumed by consumer */
189 #define ENTRY_BITPOS_C 22
190 /* state bit, fifo entry is occupied */
191 #define ENTRY_BITPOS_O 23
193 #define ENTRY_BITS_QWORDS 10
194 #define ENTRY_BITS_DESCRIPTOR 12
195 #define ENTRY_BITS_C 1
196 #define ENTRY_BITS_O 1
197 #define ENTRY_BITS_TOTAL \
198 (ENTRY_BITS_C + ENTRY_BITS_O + \
199 ENTRY_BITS_QWORDS + ENTRY_BITS_DESCRIPTOR)
201 /* extract various entry fields */
202 #define ENTRY_MASK ((1 << ENTRY_BITS_TOTAL) - 1)
203 #define ENTRY_MASK_C (((1 << ENTRY_BITS_C) - 1) << ENTRY_BITPOS_C)
204 #define ENTRY_MASK_O (((1 << ENTRY_BITS_O) - 1) << ENTRY_BITPOS_O)
205 #define ENTRY_MASK_QWORDS \
206 (((1 << ENTRY_BITS_QWORDS) - 1) << ENTRY_BITPOS_QWORDS)
207 #define ENTRY_MASK_DESCRIPTOR \
208 (((1 << ENTRY_BITS_DESCRIPTOR) - 1) << ENTRY_BITPOS_DESCRIPTOR)
210 #define ENTRY_MASK_NOSTATE (ENTRY_MASK >> (ENTRY_BITS_C + ENTRY_BITS_O))
212 #endif /* __HPILO_H */