mm-only debug patch...
[mmotm.git] / drivers / mtd / maps / sbc_gxx.c
blob1b1c0b7e11ef410e64921cdb34db049d86968183
1 /* sbc_gxx.c -- MTD map driver for Arcom Control Systems SBC-MediaGX,
2 SBC-GXm and SBC-GX1 series boards.
4 Copyright (C) 2001 Arcom Control System Ltd
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
20 The SBC-MediaGX / SBC-GXx has up to 16 MiB of
21 Intel StrataFlash (28F320/28F640) in x8 mode.
23 This driver uses the CFI probe and Intel Extended Command Set drivers.
25 The flash is accessed as follows:
27 16 KiB memory window at 0xdc000-0xdffff
29 Two IO address locations for paging
31 0x258
32 bit 0-7: address bit 14-21
33 0x259
34 bit 0-1: address bit 22-23
35 bit 7: 0 - reset/powered down
36 1 - device enabled
38 The single flash device is divided into 3 partition which appear as
39 separate MTD devices.
41 25/04/2001 AJL (Arcom) Modified signon strings and partition sizes
42 (to support bzImages up to 638KiB-ish)
45 // Includes
47 #include <linux/module.h>
48 #include <linux/slab.h>
49 #include <linux/ioport.h>
50 #include <linux/init.h>
51 #include <asm/io.h>
53 #include <linux/mtd/mtd.h>
54 #include <linux/mtd/map.h>
55 #include <linux/mtd/partitions.h>
57 // Defines
59 // - Hardware specific
61 #define WINDOW_START 0xdc000
63 /* Number of bits in offset. */
64 #define WINDOW_SHIFT 14
65 #define WINDOW_LENGTH (1 << WINDOW_SHIFT)
67 /* The bits for the offset into the window. */
68 #define WINDOW_MASK (WINDOW_LENGTH-1)
69 #define PAGE_IO 0x258
70 #define PAGE_IO_SIZE 2
72 /* bit 7 of 0x259 must be 1 to enable device. */
73 #define DEVICE_ENABLE 0x8000
75 // - Flash / Partition sizing
77 #define MAX_SIZE_KiB 16384
78 #define BOOT_PARTITION_SIZE_KiB 768
79 #define DATA_PARTITION_SIZE_KiB 1280
80 #define APP_PARTITION_SIZE_KiB 6144
82 // Globals
84 static volatile int page_in_window = -1; // Current page in window.
85 static void __iomem *iomapadr;
86 static DEFINE_SPINLOCK(sbc_gxx_spin);
88 /* partition_info gives details on the logical partitions that the split the
89 * single flash device into. If the size if zero we use up to the end of the
90 * device. */
91 static struct mtd_partition partition_info[]={
92 { .name = "SBC-GXx flash boot partition",
93 .offset = 0,
94 .size = BOOT_PARTITION_SIZE_KiB*1024 },
95 { .name = "SBC-GXx flash data partition",
96 .offset = BOOT_PARTITION_SIZE_KiB*1024,
97 .size = (DATA_PARTITION_SIZE_KiB)*1024 },
98 { .name = "SBC-GXx flash application partition",
99 .offset = (BOOT_PARTITION_SIZE_KiB+DATA_PARTITION_SIZE_KiB)*1024 }
102 #define NUM_PARTITIONS 3
104 static inline void sbc_gxx_page(struct map_info *map, unsigned long ofs)
106 unsigned long page = ofs >> WINDOW_SHIFT;
108 if( page!=page_in_window ) {
109 outw( page | DEVICE_ENABLE, PAGE_IO );
110 page_in_window = page;
115 static map_word sbc_gxx_read8(struct map_info *map, unsigned long ofs)
117 map_word ret;
118 spin_lock(&sbc_gxx_spin);
119 sbc_gxx_page(map, ofs);
120 ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
121 spin_unlock(&sbc_gxx_spin);
122 return ret;
125 static void sbc_gxx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
127 while(len) {
128 unsigned long thislen = len;
129 if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
130 thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
132 spin_lock(&sbc_gxx_spin);
133 sbc_gxx_page(map, from);
134 memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
135 spin_unlock(&sbc_gxx_spin);
136 to += thislen;
137 from += thislen;
138 len -= thislen;
142 static void sbc_gxx_write8(struct map_info *map, map_word d, unsigned long adr)
144 spin_lock(&sbc_gxx_spin);
145 sbc_gxx_page(map, adr);
146 writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
147 spin_unlock(&sbc_gxx_spin);
150 static void sbc_gxx_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
152 while(len) {
153 unsigned long thislen = len;
154 if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
155 thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
157 spin_lock(&sbc_gxx_spin);
158 sbc_gxx_page(map, to);
159 memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
160 spin_unlock(&sbc_gxx_spin);
161 to += thislen;
162 from += thislen;
163 len -= thislen;
167 static struct map_info sbc_gxx_map = {
168 .name = "SBC-GXx flash",
169 .phys = NO_XIP,
170 .size = MAX_SIZE_KiB*1024, /* this must be set to a maximum possible amount
171 of flash so the cfi probe routines find all
172 the chips */
173 .bankwidth = 1,
174 .read = sbc_gxx_read8,
175 .copy_from = sbc_gxx_copy_from,
176 .write = sbc_gxx_write8,
177 .copy_to = sbc_gxx_copy_to
180 /* MTD device for all of the flash. */
181 static struct mtd_info *all_mtd;
183 static void cleanup_sbc_gxx(void)
185 if( all_mtd ) {
186 del_mtd_partitions( all_mtd );
187 map_destroy( all_mtd );
190 iounmap(iomapadr);
191 release_region(PAGE_IO,PAGE_IO_SIZE);
194 static int __init init_sbc_gxx(void)
196 iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
197 if (!iomapadr) {
198 printk( KERN_ERR"%s: failed to ioremap memory region\n",
199 sbc_gxx_map.name );
200 return -EIO;
203 if (!request_region( PAGE_IO, PAGE_IO_SIZE, "SBC-GXx flash")) {
204 printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n",
205 sbc_gxx_map.name,
206 PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1 );
207 iounmap(iomapadr);
208 return -EAGAIN;
212 printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
213 sbc_gxx_map.name,
214 PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
215 WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
217 /* Probe for chip. */
218 all_mtd = do_map_probe( "cfi_probe", &sbc_gxx_map );
219 if( !all_mtd ) {
220 cleanup_sbc_gxx();
221 return -ENXIO;
224 all_mtd->owner = THIS_MODULE;
226 /* Create MTD devices for each partition. */
227 add_mtd_partitions(all_mtd, partition_info, NUM_PARTITIONS );
229 return 0;
232 module_init(init_sbc_gxx);
233 module_exit(cleanup_sbc_gxx);
235 MODULE_LICENSE("GPL");
236 MODULE_AUTHOR("Arcom Control Systems Ltd.");
237 MODULE_DESCRIPTION("MTD map driver for SBC-GXm and SBC-GX1 series boards");