mm-only debug patch...
[mmotm.git] / fs / proc / generic.c
blobfa678abc9db1524c35cd543c9b32a1b49e713faf
1 /*
2 * proc/fs/generic.c --- generic routines for the proc-fs
4 * This file contains generic proc-fs routines for handling
5 * directories and files.
6 *
7 * Copyright (C) 1991, 1992 Linus Torvalds.
8 * Copyright (C) 1997 Theodore Ts'o
9 */
11 #include <linux/errno.h>
12 #include <linux/time.h>
13 #include <linux/proc_fs.h>
14 #include <linux/stat.h>
15 #include <linux/module.h>
16 #include <linux/mount.h>
17 #include <linux/init.h>
18 #include <linux/idr.h>
19 #include <linux/namei.h>
20 #include <linux/bitops.h>
21 #include <linux/spinlock.h>
22 #include <linux/completion.h>
23 #include <asm/uaccess.h>
25 #include "internal.h"
27 DEFINE_SPINLOCK(proc_subdir_lock);
29 static int proc_match(int len, const char *name, struct proc_dir_entry *de)
31 if (de->namelen != len)
32 return 0;
33 return !memcmp(name, de->name, len);
36 /* buffer size is one page but our output routines use some slack for overruns */
37 #define PROC_BLOCK_SIZE (PAGE_SIZE - 1024)
39 static ssize_t
40 __proc_file_read(struct file *file, char __user *buf, size_t nbytes,
41 loff_t *ppos)
43 struct inode * inode = file->f_path.dentry->d_inode;
44 char *page;
45 ssize_t retval=0;
46 int eof=0;
47 ssize_t n, count;
48 char *start;
49 struct proc_dir_entry * dp;
50 unsigned long long pos;
53 * Gaah, please just use "seq_file" instead. The legacy /proc
54 * interfaces cut loff_t down to off_t for reads, and ignore
55 * the offset entirely for writes..
57 pos = *ppos;
58 if (pos > MAX_NON_LFS)
59 return 0;
60 if (nbytes > MAX_NON_LFS - pos)
61 nbytes = MAX_NON_LFS - pos;
63 dp = PDE(inode);
64 if (!(page = (char*) __get_free_page(GFP_TEMPORARY)))
65 return -ENOMEM;
67 while ((nbytes > 0) && !eof) {
68 count = min_t(size_t, PROC_BLOCK_SIZE, nbytes);
70 start = NULL;
71 if (dp->read_proc) {
73 * How to be a proc read function
74 * ------------------------------
75 * Prototype:
76 * int f(char *buffer, char **start, off_t offset,
77 * int count, int *peof, void *dat)
79 * Assume that the buffer is "count" bytes in size.
81 * If you know you have supplied all the data you
82 * have, set *peof.
84 * You have three ways to return data:
85 * 0) Leave *start = NULL. (This is the default.)
86 * Put the data of the requested offset at that
87 * offset within the buffer. Return the number (n)
88 * of bytes there are from the beginning of the
89 * buffer up to the last byte of data. If the
90 * number of supplied bytes (= n - offset) is
91 * greater than zero and you didn't signal eof
92 * and the reader is prepared to take more data
93 * you will be called again with the requested
94 * offset advanced by the number of bytes
95 * absorbed. This interface is useful for files
96 * no larger than the buffer.
97 * 1) Set *start = an unsigned long value less than
98 * the buffer address but greater than zero.
99 * Put the data of the requested offset at the
100 * beginning of the buffer. Return the number of
101 * bytes of data placed there. If this number is
102 * greater than zero and you didn't signal eof
103 * and the reader is prepared to take more data
104 * you will be called again with the requested
105 * offset advanced by *start. This interface is
106 * useful when you have a large file consisting
107 * of a series of blocks which you want to count
108 * and return as wholes.
109 * (Hack by Paul.Russell@rustcorp.com.au)
110 * 2) Set *start = an address within the buffer.
111 * Put the data of the requested offset at *start.
112 * Return the number of bytes of data placed there.
113 * If this number is greater than zero and you
114 * didn't signal eof and the reader is prepared to
115 * take more data you will be called again with the
116 * requested offset advanced by the number of bytes
117 * absorbed.
119 n = dp->read_proc(page, &start, *ppos,
120 count, &eof, dp->data);
121 } else
122 break;
124 if (n == 0) /* end of file */
125 break;
126 if (n < 0) { /* error */
127 if (retval == 0)
128 retval = n;
129 break;
132 if (start == NULL) {
133 if (n > PAGE_SIZE) {
134 printk(KERN_ERR
135 "proc_file_read: Apparent buffer overflow!\n");
136 n = PAGE_SIZE;
138 n -= *ppos;
139 if (n <= 0)
140 break;
141 if (n > count)
142 n = count;
143 start = page + *ppos;
144 } else if (start < page) {
145 if (n > PAGE_SIZE) {
146 printk(KERN_ERR
147 "proc_file_read: Apparent buffer overflow!\n");
148 n = PAGE_SIZE;
150 if (n > count) {
152 * Don't reduce n because doing so might
153 * cut off part of a data block.
155 printk(KERN_WARNING
156 "proc_file_read: Read count exceeded\n");
158 } else /* start >= page */ {
159 unsigned long startoff = (unsigned long)(start - page);
160 if (n > (PAGE_SIZE - startoff)) {
161 printk(KERN_ERR
162 "proc_file_read: Apparent buffer overflow!\n");
163 n = PAGE_SIZE - startoff;
165 if (n > count)
166 n = count;
169 n -= copy_to_user(buf, start < page ? page : start, n);
170 if (n == 0) {
171 if (retval == 0)
172 retval = -EFAULT;
173 break;
176 *ppos += start < page ? (unsigned long)start : n;
177 nbytes -= n;
178 buf += n;
179 retval += n;
181 free_page((unsigned long) page);
182 return retval;
185 static ssize_t
186 proc_file_read(struct file *file, char __user *buf, size_t nbytes,
187 loff_t *ppos)
189 struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
190 ssize_t rv = -EIO;
192 spin_lock(&pde->pde_unload_lock);
193 if (!pde->proc_fops) {
194 spin_unlock(&pde->pde_unload_lock);
195 return rv;
197 pde->pde_users++;
198 spin_unlock(&pde->pde_unload_lock);
200 rv = __proc_file_read(file, buf, nbytes, ppos);
202 pde_users_dec(pde);
203 return rv;
206 static ssize_t
207 proc_file_write(struct file *file, const char __user *buffer,
208 size_t count, loff_t *ppos)
210 struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
211 ssize_t rv = -EIO;
213 if (pde->write_proc) {
214 spin_lock(&pde->pde_unload_lock);
215 if (!pde->proc_fops) {
216 spin_unlock(&pde->pde_unload_lock);
217 return rv;
219 pde->pde_users++;
220 spin_unlock(&pde->pde_unload_lock);
222 /* FIXME: does this routine need ppos? probably... */
223 rv = pde->write_proc(file, buffer, count, pde->data);
224 pde_users_dec(pde);
226 return rv;
230 static loff_t
231 proc_file_lseek(struct file *file, loff_t offset, int orig)
233 loff_t retval = -EINVAL;
234 switch (orig) {
235 case 1:
236 offset += file->f_pos;
237 /* fallthrough */
238 case 0:
239 if (offset < 0 || offset > MAX_NON_LFS)
240 break;
241 file->f_pos = retval = offset;
243 return retval;
246 static const struct file_operations proc_file_operations = {
247 .llseek = proc_file_lseek,
248 .read = proc_file_read,
249 .write = proc_file_write,
252 static int proc_notify_change(struct dentry *dentry, struct iattr *iattr)
254 struct inode *inode = dentry->d_inode;
255 struct proc_dir_entry *de = PDE(inode);
256 int error;
258 error = inode_change_ok(inode, iattr);
259 if (error)
260 goto out;
262 error = inode_setattr(inode, iattr);
263 if (error)
264 goto out;
266 de->uid = inode->i_uid;
267 de->gid = inode->i_gid;
268 de->mode = inode->i_mode;
269 out:
270 return error;
273 static int proc_getattr(struct vfsmount *mnt, struct dentry *dentry,
274 struct kstat *stat)
276 struct inode *inode = dentry->d_inode;
277 struct proc_dir_entry *de = PROC_I(inode)->pde;
278 if (de && de->nlink)
279 inode->i_nlink = de->nlink;
281 generic_fillattr(inode, stat);
282 return 0;
285 static const struct inode_operations proc_file_inode_operations = {
286 .setattr = proc_notify_change,
290 * This function parses a name such as "tty/driver/serial", and
291 * returns the struct proc_dir_entry for "/proc/tty/driver", and
292 * returns "serial" in residual.
294 static int xlate_proc_name(const char *name,
295 struct proc_dir_entry **ret, const char **residual)
297 const char *cp = name, *next;
298 struct proc_dir_entry *de;
299 int len;
300 int rtn = 0;
302 de = *ret;
303 if (!de)
304 de = &proc_root;
306 spin_lock(&proc_subdir_lock);
307 while (1) {
308 next = strchr(cp, '/');
309 if (!next)
310 break;
312 len = next - cp;
313 for (de = de->subdir; de ; de = de->next) {
314 if (proc_match(len, cp, de))
315 break;
317 if (!de) {
318 rtn = -ENOENT;
319 goto out;
321 cp += len + 1;
323 *residual = cp;
324 *ret = de;
325 out:
326 spin_unlock(&proc_subdir_lock);
327 return rtn;
330 static DEFINE_IDA(proc_inum_ida);
331 static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */
333 #define PROC_DYNAMIC_FIRST 0xF0000000U
336 * Return an inode number between PROC_DYNAMIC_FIRST and
337 * 0xffffffff, or zero on failure.
339 * Current inode allocations in the proc-fs (hex-numbers):
341 * 00000000 reserved
342 * 00000001-00000fff static entries (goners)
343 * 001 root-ino
345 * 00001000-00001fff unused
346 * 0001xxxx-7fffxxxx pid-dir entries for pid 1-7fff
347 * 80000000-efffffff unused
348 * f0000000-ffffffff dynamic entries
350 * Goal:
351 * Once we split the thing into several virtual filesystems,
352 * we will get rid of magical ranges (and this comment, BTW).
354 static unsigned int get_inode_number(void)
356 unsigned int i;
357 int error;
359 retry:
360 if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0)
361 return 0;
363 spin_lock(&proc_inum_lock);
364 error = ida_get_new(&proc_inum_ida, &i);
365 spin_unlock(&proc_inum_lock);
366 if (error == -EAGAIN)
367 goto retry;
368 else if (error)
369 return 0;
371 if (i > UINT_MAX - PROC_DYNAMIC_FIRST) {
372 spin_lock(&proc_inum_lock);
373 ida_remove(&proc_inum_ida, i);
374 spin_unlock(&proc_inum_lock);
375 return 0;
377 return PROC_DYNAMIC_FIRST + i;
380 static void release_inode_number(unsigned int inum)
382 spin_lock(&proc_inum_lock);
383 ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST);
384 spin_unlock(&proc_inum_lock);
387 static void *proc_follow_link(struct dentry *dentry, struct nameidata *nd)
389 nd_set_link(nd, PDE(dentry->d_inode)->data);
390 return NULL;
393 static const struct inode_operations proc_link_inode_operations = {
394 .readlink = generic_readlink,
395 .follow_link = proc_follow_link,
399 * As some entries in /proc are volatile, we want to
400 * get rid of unused dentries. This could be made
401 * smarter: we could keep a "volatile" flag in the
402 * inode to indicate which ones to keep.
404 static int proc_delete_dentry(struct dentry * dentry)
406 return 1;
409 static const struct dentry_operations proc_dentry_operations =
411 .d_delete = proc_delete_dentry,
415 * Don't create negative dentries here, return -ENOENT by hand
416 * instead.
418 struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *dir,
419 struct dentry *dentry)
421 struct inode *inode = NULL;
422 int error = -ENOENT;
424 spin_lock(&proc_subdir_lock);
425 for (de = de->subdir; de ; de = de->next) {
426 if (de->namelen != dentry->d_name.len)
427 continue;
428 if (!memcmp(dentry->d_name.name, de->name, de->namelen)) {
429 unsigned int ino;
431 ino = de->low_ino;
432 de_get(de);
433 spin_unlock(&proc_subdir_lock);
434 error = -EINVAL;
435 inode = proc_get_inode(dir->i_sb, ino, de);
436 goto out_unlock;
439 spin_unlock(&proc_subdir_lock);
440 out_unlock:
442 if (inode) {
443 dentry->d_op = &proc_dentry_operations;
444 d_add(dentry, inode);
445 return NULL;
447 if (de)
448 de_put(de);
449 return ERR_PTR(error);
452 struct dentry *proc_lookup(struct inode *dir, struct dentry *dentry,
453 struct nameidata *nd)
455 return proc_lookup_de(PDE(dir), dir, dentry);
459 * This returns non-zero if at EOF, so that the /proc
460 * root directory can use this and check if it should
461 * continue with the <pid> entries..
463 * Note that the VFS-layer doesn't care about the return
464 * value of the readdir() call, as long as it's non-negative
465 * for success..
467 int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent,
468 filldir_t filldir)
470 unsigned int ino;
471 int i;
472 struct inode *inode = filp->f_path.dentry->d_inode;
473 int ret = 0;
475 ino = inode->i_ino;
476 i = filp->f_pos;
477 switch (i) {
478 case 0:
479 if (filldir(dirent, ".", 1, i, ino, DT_DIR) < 0)
480 goto out;
481 i++;
482 filp->f_pos++;
483 /* fall through */
484 case 1:
485 if (filldir(dirent, "..", 2, i,
486 parent_ino(filp->f_path.dentry),
487 DT_DIR) < 0)
488 goto out;
489 i++;
490 filp->f_pos++;
491 /* fall through */
492 default:
493 spin_lock(&proc_subdir_lock);
494 de = de->subdir;
495 i -= 2;
496 for (;;) {
497 if (!de) {
498 ret = 1;
499 spin_unlock(&proc_subdir_lock);
500 goto out;
502 if (!i)
503 break;
504 de = de->next;
505 i--;
508 do {
509 struct proc_dir_entry *next;
511 /* filldir passes info to user space */
512 de_get(de);
513 spin_unlock(&proc_subdir_lock);
514 if (filldir(dirent, de->name, de->namelen, filp->f_pos,
515 de->low_ino, de->mode >> 12) < 0) {
516 de_put(de);
517 goto out;
519 spin_lock(&proc_subdir_lock);
520 filp->f_pos++;
521 next = de->next;
522 de_put(de);
523 de = next;
524 } while (de);
525 spin_unlock(&proc_subdir_lock);
527 ret = 1;
528 out:
529 return ret;
532 int proc_readdir(struct file *filp, void *dirent, filldir_t filldir)
534 struct inode *inode = filp->f_path.dentry->d_inode;
536 return proc_readdir_de(PDE(inode), filp, dirent, filldir);
540 * These are the generic /proc directory operations. They
541 * use the in-memory "struct proc_dir_entry" tree to parse
542 * the /proc directory.
544 static const struct file_operations proc_dir_operations = {
545 .llseek = generic_file_llseek,
546 .read = generic_read_dir,
547 .readdir = proc_readdir,
551 * proc directories can do almost nothing..
553 static const struct inode_operations proc_dir_inode_operations = {
554 .lookup = proc_lookup,
555 .getattr = proc_getattr,
556 .setattr = proc_notify_change,
559 static int proc_register(struct proc_dir_entry * dir, struct proc_dir_entry * dp)
561 unsigned int i;
562 struct proc_dir_entry *tmp;
564 i = get_inode_number();
565 if (i == 0)
566 return -EAGAIN;
567 dp->low_ino = i;
569 if (S_ISDIR(dp->mode)) {
570 if (dp->proc_iops == NULL) {
571 dp->proc_fops = &proc_dir_operations;
572 dp->proc_iops = &proc_dir_inode_operations;
574 dir->nlink++;
575 } else if (S_ISLNK(dp->mode)) {
576 if (dp->proc_iops == NULL)
577 dp->proc_iops = &proc_link_inode_operations;
578 } else if (S_ISREG(dp->mode)) {
579 if (dp->proc_fops == NULL)
580 dp->proc_fops = &proc_file_operations;
581 if (dp->proc_iops == NULL)
582 dp->proc_iops = &proc_file_inode_operations;
585 spin_lock(&proc_subdir_lock);
587 for (tmp = dir->subdir; tmp; tmp = tmp->next)
588 if (strcmp(tmp->name, dp->name) == 0) {
589 WARN(1, KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
590 dir->name, dp->name);
591 break;
594 dp->next = dir->subdir;
595 dp->parent = dir;
596 dir->subdir = dp;
597 spin_unlock(&proc_subdir_lock);
599 return 0;
602 static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent,
603 const char *name,
604 mode_t mode,
605 nlink_t nlink)
607 struct proc_dir_entry *ent = NULL;
608 const char *fn = name;
609 int len;
611 /* make sure name is valid */
612 if (!name || !strlen(name)) goto out;
614 if (xlate_proc_name(name, parent, &fn) != 0)
615 goto out;
617 /* At this point there must not be any '/' characters beyond *fn */
618 if (strchr(fn, '/'))
619 goto out;
621 len = strlen(fn);
623 ent = kmalloc(sizeof(struct proc_dir_entry) + len + 1, GFP_KERNEL);
624 if (!ent) goto out;
626 memset(ent, 0, sizeof(struct proc_dir_entry));
627 memcpy(((char *) ent) + sizeof(struct proc_dir_entry), fn, len + 1);
628 ent->name = ((char *) ent) + sizeof(*ent);
629 ent->namelen = len;
630 ent->mode = mode;
631 ent->nlink = nlink;
632 atomic_set(&ent->count, 1);
633 ent->pde_users = 0;
634 spin_lock_init(&ent->pde_unload_lock);
635 ent->pde_unload_completion = NULL;
636 INIT_LIST_HEAD(&ent->pde_openers);
637 out:
638 return ent;
641 struct proc_dir_entry *proc_symlink(const char *name,
642 struct proc_dir_entry *parent, const char *dest)
644 struct proc_dir_entry *ent;
646 ent = __proc_create(&parent, name,
647 (S_IFLNK | S_IRUGO | S_IWUGO | S_IXUGO),1);
649 if (ent) {
650 ent->data = kmalloc((ent->size=strlen(dest))+1, GFP_KERNEL);
651 if (ent->data) {
652 strcpy((char*)ent->data,dest);
653 if (proc_register(parent, ent) < 0) {
654 kfree(ent->data);
655 kfree(ent);
656 ent = NULL;
658 } else {
659 kfree(ent);
660 ent = NULL;
663 return ent;
666 struct proc_dir_entry *proc_mkdir_mode(const char *name, mode_t mode,
667 struct proc_dir_entry *parent)
669 struct proc_dir_entry *ent;
671 ent = __proc_create(&parent, name, S_IFDIR | mode, 2);
672 if (ent) {
673 if (proc_register(parent, ent) < 0) {
674 kfree(ent);
675 ent = NULL;
678 return ent;
681 struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name,
682 struct proc_dir_entry *parent)
684 struct proc_dir_entry *ent;
686 ent = __proc_create(&parent, name, S_IFDIR | S_IRUGO | S_IXUGO, 2);
687 if (ent) {
688 ent->data = net;
689 if (proc_register(parent, ent) < 0) {
690 kfree(ent);
691 ent = NULL;
694 return ent;
696 EXPORT_SYMBOL_GPL(proc_net_mkdir);
698 struct proc_dir_entry *proc_mkdir(const char *name,
699 struct proc_dir_entry *parent)
701 return proc_mkdir_mode(name, S_IRUGO | S_IXUGO, parent);
704 struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
705 struct proc_dir_entry *parent)
707 struct proc_dir_entry *ent;
708 nlink_t nlink;
710 if (S_ISDIR(mode)) {
711 if ((mode & S_IALLUGO) == 0)
712 mode |= S_IRUGO | S_IXUGO;
713 nlink = 2;
714 } else {
715 if ((mode & S_IFMT) == 0)
716 mode |= S_IFREG;
717 if ((mode & S_IALLUGO) == 0)
718 mode |= S_IRUGO;
719 nlink = 1;
722 ent = __proc_create(&parent, name, mode, nlink);
723 if (ent) {
724 if (proc_register(parent, ent) < 0) {
725 kfree(ent);
726 ent = NULL;
729 return ent;
732 struct proc_dir_entry *proc_create_data(const char *name, mode_t mode,
733 struct proc_dir_entry *parent,
734 const struct file_operations *proc_fops,
735 void *data)
737 struct proc_dir_entry *pde;
738 nlink_t nlink;
740 if (S_ISDIR(mode)) {
741 if ((mode & S_IALLUGO) == 0)
742 mode |= S_IRUGO | S_IXUGO;
743 nlink = 2;
744 } else {
745 if ((mode & S_IFMT) == 0)
746 mode |= S_IFREG;
747 if ((mode & S_IALLUGO) == 0)
748 mode |= S_IRUGO;
749 nlink = 1;
752 pde = __proc_create(&parent, name, mode, nlink);
753 if (!pde)
754 goto out;
755 pde->proc_fops = proc_fops;
756 pde->data = data;
757 if (proc_register(parent, pde) < 0)
758 goto out_free;
759 return pde;
760 out_free:
761 kfree(pde);
762 out:
763 return NULL;
766 void free_proc_entry(struct proc_dir_entry *de)
768 unsigned int ino = de->low_ino;
770 if (ino < PROC_DYNAMIC_FIRST)
771 return;
773 release_inode_number(ino);
775 if (S_ISLNK(de->mode))
776 kfree(de->data);
777 kfree(de);
781 * Remove a /proc entry and free it if it's not currently in use.
783 void remove_proc_entry(const char *name, struct proc_dir_entry *parent)
785 struct proc_dir_entry **p;
786 struct proc_dir_entry *de = NULL;
787 const char *fn = name;
788 int len;
790 if (xlate_proc_name(name, &parent, &fn) != 0)
791 return;
792 len = strlen(fn);
794 spin_lock(&proc_subdir_lock);
795 for (p = &parent->subdir; *p; p=&(*p)->next ) {
796 if (proc_match(len, fn, *p)) {
797 de = *p;
798 *p = de->next;
799 de->next = NULL;
800 break;
803 spin_unlock(&proc_subdir_lock);
804 if (!de)
805 return;
807 spin_lock(&de->pde_unload_lock);
809 * Stop accepting new callers into module. If you're
810 * dynamically allocating ->proc_fops, save a pointer somewhere.
812 de->proc_fops = NULL;
813 /* Wait until all existing callers into module are done. */
814 if (de->pde_users > 0) {
815 DECLARE_COMPLETION_ONSTACK(c);
817 if (!de->pde_unload_completion)
818 de->pde_unload_completion = &c;
820 spin_unlock(&de->pde_unload_lock);
822 wait_for_completion(de->pde_unload_completion);
824 goto continue_removing;
826 spin_unlock(&de->pde_unload_lock);
828 continue_removing:
829 spin_lock(&de->pde_unload_lock);
830 while (!list_empty(&de->pde_openers)) {
831 struct pde_opener *pdeo;
833 pdeo = list_first_entry(&de->pde_openers, struct pde_opener, lh);
834 list_del(&pdeo->lh);
835 spin_unlock(&de->pde_unload_lock);
836 pdeo->release(pdeo->inode, pdeo->file);
837 kfree(pdeo);
838 spin_lock(&de->pde_unload_lock);
840 spin_unlock(&de->pde_unload_lock);
842 if (S_ISDIR(de->mode))
843 parent->nlink--;
844 de->nlink = 0;
845 WARN(de->subdir, KERN_WARNING "%s: removing non-empty directory "
846 "'%s/%s', leaking at least '%s'\n", __func__,
847 de->parent->name, de->name, de->subdir->name);
848 if (atomic_dec_and_test(&de->count))
849 free_proc_entry(de);