mm-only debug patch...
[mmotm.git] / sound / pci / hda / patch_si3054.c
blob43b436c5d01bc245a3bbbdfcd6c54f08af0feaa3
1 /*
2 * Universal Interface for Intel High Definition Audio Codec
4 * HD audio interface patch for Silicon Labs 3054/5 modem codec
6 * Copyright (c) 2005 Sasha Khapyorsky <sashak@alsa-project.org>
7 * Takashi Iwai <tiwai@suse.de>
10 * This driver is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This driver is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/slab.h>
28 #include <sound/core.h>
29 #include "hda_codec.h"
30 #include "hda_local.h"
32 /* si3054 verbs */
33 #define SI3054_VERB_READ_NODE 0x900
34 #define SI3054_VERB_WRITE_NODE 0x100
36 /* si3054 nodes (registers) */
37 #define SI3054_EXTENDED_MID 2
38 #define SI3054_LINE_RATE 3
39 #define SI3054_LINE_LEVEL 4
40 #define SI3054_GPIO_CFG 5
41 #define SI3054_GPIO_POLARITY 6
42 #define SI3054_GPIO_STICKY 7
43 #define SI3054_GPIO_WAKEUP 8
44 #define SI3054_GPIO_STATUS 9
45 #define SI3054_GPIO_CONTROL 10
46 #define SI3054_MISC_AFE 11
47 #define SI3054_CHIPID 12
48 #define SI3054_LINE_CFG1 13
49 #define SI3054_LINE_STATUS 14
50 #define SI3054_DC_TERMINATION 15
51 #define SI3054_LINE_CONFIG 16
52 #define SI3054_CALLPROG_ATT 17
53 #define SI3054_SQ_CONTROL 18
54 #define SI3054_MISC_CONTROL 19
55 #define SI3054_RING_CTRL1 20
56 #define SI3054_RING_CTRL2 21
58 /* extended MID */
59 #define SI3054_MEI_READY 0xf
61 /* line level */
62 #define SI3054_ATAG_MASK 0x00f0
63 #define SI3054_DTAG_MASK 0xf000
65 /* GPIO bits */
66 #define SI3054_GPIO_OH 0x0001
67 #define SI3054_GPIO_CID 0x0002
69 /* chipid and revisions */
70 #define SI3054_CHIPID_CODEC_REV_MASK 0x000f
71 #define SI3054_CHIPID_DAA_REV_MASK 0x00f0
72 #define SI3054_CHIPID_INTERNATIONAL 0x0100
73 #define SI3054_CHIPID_DAA_ID 0x0f00
74 #define SI3054_CHIPID_CODEC_ID (1<<12)
76 /* si3054 codec registers (nodes) access macros */
77 #define GET_REG(codec,reg) (snd_hda_codec_read(codec,reg,0,SI3054_VERB_READ_NODE,0))
78 #define SET_REG(codec,reg,val) (snd_hda_codec_write(codec,reg,0,SI3054_VERB_WRITE_NODE,val))
79 #define SET_REG_CACHE(codec,reg,val) \
80 snd_hda_codec_write_cache(codec,reg,0,SI3054_VERB_WRITE_NODE,val)
83 struct si3054_spec {
84 unsigned international;
85 struct hda_pcm pcm;
90 * Modem mixer
93 #define PRIVATE_VALUE(reg,mask) ((reg<<16)|(mask&0xffff))
94 #define PRIVATE_REG(val) ((val>>16)&0xffff)
95 #define PRIVATE_MASK(val) (val&0xffff)
97 #define si3054_switch_info snd_ctl_boolean_mono_info
99 static int si3054_switch_get(struct snd_kcontrol *kcontrol,
100 struct snd_ctl_elem_value *uvalue)
102 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
103 u16 reg = PRIVATE_REG(kcontrol->private_value);
104 u16 mask = PRIVATE_MASK(kcontrol->private_value);
105 uvalue->value.integer.value[0] = (GET_REG(codec, reg)) & mask ? 1 : 0 ;
106 return 0;
109 static int si3054_switch_put(struct snd_kcontrol *kcontrol,
110 struct snd_ctl_elem_value *uvalue)
112 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
113 u16 reg = PRIVATE_REG(kcontrol->private_value);
114 u16 mask = PRIVATE_MASK(kcontrol->private_value);
115 if (uvalue->value.integer.value[0])
116 SET_REG_CACHE(codec, reg, (GET_REG(codec, reg)) | mask);
117 else
118 SET_REG_CACHE(codec, reg, (GET_REG(codec, reg)) & ~mask);
119 return 0;
122 #define SI3054_KCONTROL(kname,reg,mask) { \
123 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
124 .name = kname, \
125 .info = si3054_switch_info, \
126 .get = si3054_switch_get, \
127 .put = si3054_switch_put, \
128 .private_value = PRIVATE_VALUE(reg,mask), \
132 static struct snd_kcontrol_new si3054_modem_mixer[] = {
133 SI3054_KCONTROL("Off-hook Switch", SI3054_GPIO_CONTROL, SI3054_GPIO_OH),
134 SI3054_KCONTROL("Caller ID Switch", SI3054_GPIO_CONTROL, SI3054_GPIO_CID),
138 static int si3054_build_controls(struct hda_codec *codec)
140 return snd_hda_add_new_ctls(codec, si3054_modem_mixer);
145 * PCM callbacks
148 static int si3054_pcm_prepare(struct hda_pcm_stream *hinfo,
149 struct hda_codec *codec,
150 unsigned int stream_tag,
151 unsigned int format,
152 struct snd_pcm_substream *substream)
154 u16 val;
156 SET_REG(codec, SI3054_LINE_RATE, substream->runtime->rate);
157 val = GET_REG(codec, SI3054_LINE_LEVEL);
158 val &= 0xff << (8 * (substream->stream != SNDRV_PCM_STREAM_PLAYBACK));
159 val |= ((stream_tag & 0xf) << 4) << (8 * (substream->stream == SNDRV_PCM_STREAM_PLAYBACK));
160 SET_REG(codec, SI3054_LINE_LEVEL, val);
162 snd_hda_codec_setup_stream(codec, hinfo->nid,
163 stream_tag, 0, format);
164 return 0;
167 static int si3054_pcm_open(struct hda_pcm_stream *hinfo,
168 struct hda_codec *codec,
169 struct snd_pcm_substream *substream)
171 static unsigned int rates[] = { 8000, 9600, 16000 };
172 static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
173 .count = ARRAY_SIZE(rates),
174 .list = rates,
175 .mask = 0,
177 substream->runtime->hw.period_bytes_min = 80;
178 return snd_pcm_hw_constraint_list(substream->runtime, 0,
179 SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates);
183 static struct hda_pcm_stream si3054_pcm = {
184 .substreams = 1,
185 .channels_min = 1,
186 .channels_max = 1,
187 .nid = 0x1,
188 .rates = SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_16000|SNDRV_PCM_RATE_KNOT,
189 .formats = SNDRV_PCM_FMTBIT_S16_LE,
190 .maxbps = 16,
191 .ops = {
192 .open = si3054_pcm_open,
193 .prepare = si3054_pcm_prepare,
198 static int si3054_build_pcms(struct hda_codec *codec)
200 struct si3054_spec *spec = codec->spec;
201 struct hda_pcm *info = &spec->pcm;
202 si3054_pcm.nid = codec->mfg;
203 codec->num_pcms = 1;
204 codec->pcm_info = info;
205 info->name = "Si3054 Modem";
206 info->stream[SNDRV_PCM_STREAM_PLAYBACK] = si3054_pcm;
207 info->stream[SNDRV_PCM_STREAM_CAPTURE] = si3054_pcm;
208 info->pcm_type = HDA_PCM_TYPE_MODEM;
209 return 0;
214 * Init part
217 static int si3054_init(struct hda_codec *codec)
219 struct si3054_spec *spec = codec->spec;
220 unsigned wait_count;
221 u16 val;
223 snd_hda_codec_write(codec, AC_NODE_ROOT, 0, AC_VERB_SET_CODEC_RESET, 0);
224 snd_hda_codec_write(codec, codec->mfg, 0, AC_VERB_SET_STREAM_FORMAT, 0);
225 SET_REG(codec, SI3054_LINE_RATE, 9600);
226 SET_REG(codec, SI3054_LINE_LEVEL, SI3054_DTAG_MASK|SI3054_ATAG_MASK);
227 SET_REG(codec, SI3054_EXTENDED_MID, 0);
229 wait_count = 10;
230 do {
231 msleep(2);
232 val = GET_REG(codec, SI3054_EXTENDED_MID);
233 } while ((val & SI3054_MEI_READY) != SI3054_MEI_READY && wait_count--);
235 if((val&SI3054_MEI_READY) != SI3054_MEI_READY) {
236 snd_printk(KERN_ERR "si3054: cannot initialize. EXT MID = %04x\n", val);
237 /* let's pray that this is no fatal error */
238 /* return -EACCES; */
241 SET_REG(codec, SI3054_GPIO_POLARITY, 0xffff);
242 SET_REG(codec, SI3054_GPIO_CFG, 0x0);
243 SET_REG(codec, SI3054_MISC_AFE, 0);
244 SET_REG(codec, SI3054_LINE_CFG1,0x200);
246 if((GET_REG(codec,SI3054_LINE_STATUS) & (1<<6)) == 0) {
247 snd_printd("Link Frame Detect(FDT) is not ready (line status: %04x)\n",
248 GET_REG(codec,SI3054_LINE_STATUS));
251 spec->international = GET_REG(codec, SI3054_CHIPID) & SI3054_CHIPID_INTERNATIONAL;
253 return 0;
256 static void si3054_free(struct hda_codec *codec)
258 kfree(codec->spec);
265 static struct hda_codec_ops si3054_patch_ops = {
266 .build_controls = si3054_build_controls,
267 .build_pcms = si3054_build_pcms,
268 .init = si3054_init,
269 .free = si3054_free,
272 static int patch_si3054(struct hda_codec *codec)
274 struct si3054_spec *spec = kzalloc(sizeof(*spec), GFP_KERNEL);
275 if (spec == NULL)
276 return -ENOMEM;
277 codec->spec = spec;
278 codec->patch_ops = si3054_patch_ops;
279 return 0;
283 * patch entries
285 static struct hda_codec_preset snd_hda_preset_si3054[] = {
286 { .id = 0x163c3055, .name = "Si3054", .patch = patch_si3054 },
287 { .id = 0x163c3155, .name = "Si3054", .patch = patch_si3054 },
288 { .id = 0x11c13026, .name = "Si3054", .patch = patch_si3054 },
289 { .id = 0x11c13055, .name = "Si3054", .patch = patch_si3054 },
290 { .id = 0x11c13155, .name = "Si3054", .patch = patch_si3054 },
291 { .id = 0x10573055, .name = "Si3054", .patch = patch_si3054 },
292 { .id = 0x10573057, .name = "Si3054", .patch = patch_si3054 },
293 { .id = 0x10573155, .name = "Si3054", .patch = patch_si3054 },
294 /* VIA HDA on Clevo m540 */
295 { .id = 0x11063288, .name = "Si3054", .patch = patch_si3054 },
296 /* Asus A8J Modem (SM56) */
297 { .id = 0x15433155, .name = "Si3054", .patch = patch_si3054 },
298 /* LG LW20 modem */
299 { .id = 0x18540018, .name = "Si3054", .patch = patch_si3054 },
303 MODULE_ALIAS("snd-hda-codec-id:163c3055");
304 MODULE_ALIAS("snd-hda-codec-id:163c3155");
305 MODULE_ALIAS("snd-hda-codec-id:11c13026");
306 MODULE_ALIAS("snd-hda-codec-id:11c13055");
307 MODULE_ALIAS("snd-hda-codec-id:11c13155");
308 MODULE_ALIAS("snd-hda-codec-id:10573055");
309 MODULE_ALIAS("snd-hda-codec-id:10573057");
310 MODULE_ALIAS("snd-hda-codec-id:10573155");
311 MODULE_ALIAS("snd-hda-codec-id:11063288");
312 MODULE_ALIAS("snd-hda-codec-id:15433155");
313 MODULE_ALIAS("snd-hda-codec-id:18540018");
315 MODULE_LICENSE("GPL");
316 MODULE_DESCRIPTION("Si3054 HD-audio modem codec");
318 static struct hda_codec_preset_list si3054_list = {
319 .preset = snd_hda_preset_si3054,
320 .owner = THIS_MODULE,
323 static int __init patch_si3054_init(void)
325 return snd_hda_add_codec_preset(&si3054_list);
328 static void __exit patch_si3054_exit(void)
330 snd_hda_delete_codec_preset(&si3054_list);
333 module_init(patch_si3054_init)
334 module_exit(patch_si3054_exit)