arch/mips/pci/fixup-fuloong2e.c

   1 /*
   2  * Copyright (C) 2004 ICT CAS
   3  * Author: Li xiaoyu, ICT CAS
   4  *   lixy@ict.ac.cn
   5  *
   6  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
   7  * Author: Fuxin Zhang, zhangfx@lemote.com
   8  *
   9  *  This program is free software; you can redistribute  it and/or modify it
  10  *  under  the terms of  the GNU General  Public License as published by the
  11  *  Free Software Foundation;  either version 2 of the  License, or (at your
  12  *  option) any later version.
  13  */
  14 #include <linux/init.h>
  15 #include <linux/pci.h>
  16 #include <asm/mips-boards/bonito64.h>
  17
  18 /* South bridge slot number is set by the pci probe process */
  19 static u8 sb_slot = 5;
  20
  21 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  22 {
  23         int irq = 0;
  24
  25         if (slot == sb_slot) {
  26                 switch (PCI_FUNC(dev->devfn)) {
  27                 case 2:
  28                         irq = 10;
  29                         break;
  30                 case 3:
  31                         irq = 11;
  32                         break;
  33                 case 5:
  34                         irq = 9;
  35                         break;
  36                 }
  37         } else {
  38                 irq = BONITO_IRQ_BASE + 25 + pin;
  39         }
  40         return irq;
  41
  42 }
  43
  44 /* Do platform specific device initialization at pci_enable_device() time */
  45 int pcibios_plat_dev_init(struct pci_dev *dev)
  46 {
  47         return 0;
  48 }
  49
  50 static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
  51 {
  52         unsigned int val;
  53
  54         /* Configues port 1, 2, 3, 4 to be validate*/
  55         pci_read_config_dword(pdev, 0xe0, &val);
  56         pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
  57
  58         /* System clock is 48-MHz Oscillator. */
  59         pci_write_config_dword(pdev, 0xe4, 1 << 5);
  60 }
  61
  62 static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
  63 {
  64         unsigned char c;
  65
  66         sb_slot = PCI_SLOT(pdev->devfn);
  67
  68         printk(KERN_INFO "via686b fix: ISA bridge\n");
  69
  70         /*  Enable I/O Recovery time */
  71         pci_write_config_byte(pdev, 0x40, 0x08);
  72
  73         /*  Enable ISA refresh */
  74         pci_write_config_byte(pdev, 0x41, 0x01);
  75
  76         /*  disable ISA line buffer */
  77         pci_write_config_byte(pdev, 0x45, 0x00);
  78
  79         /*  Gate INTR, and flush line buffer */
  80         pci_write_config_byte(pdev, 0x46, 0xe0);
  81
  82         /*  Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
  83         /* pci_write_config_byte(pdev, 0x47, 0x20); */
  84
  85         /*
  86          *  enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
  87          *  enable time-out timer
  88          */
  89         pci_write_config_byte(pdev, 0x47, 0xe6);
  90
  91         /*
  92          * enable level trigger on pci irqs: 9,10,11,13
  93          * important! without this PCI interrupts won't work
  94          */
  95         outb(0x2e, 0x4d1);
  96
  97         /*  512 K PCI Decode */
  98         pci_write_config_byte(pdev, 0x48, 0x01);
  99
 100         /*  Wait for PGNT before grant to ISA Master/DMA */
 101         pci_write_config_byte(pdev, 0x4a, 0x84);
 102
 103         /*
 104          * Plug'n'Play
 105          *
 106          *  Parallel DRQ 3, Floppy DRQ 2 (default)
 107          */
 108         pci_write_config_byte(pdev, 0x50, 0x0e);
 109
 110         /*
 111          * IRQ Routing for Floppy and Parallel port
 112          *
 113          *  IRQ 6 for floppy, IRQ 7 for parallel port
 114          */
 115         pci_write_config_byte(pdev, 0x51, 0x76);
 116
 117         /* IRQ Routing for serial ports (take IRQ 3 and 4) */
 118         pci_write_config_byte(pdev, 0x52, 0x34);
 119
 120         /*  All IRQ's level triggered. */
 121         pci_write_config_byte(pdev, 0x54, 0x00);
 122
 123         /* route PIRQA-D irq */
 124         pci_write_config_byte(pdev, 0x55, 0x90);        /* bit 7-4, PIRQA */
 125         pci_write_config_byte(pdev, 0x56, 0xba);        /* bit 7-4, PIRQC; */
 126                                                         /* 3-0, PIRQB */
 127         pci_write_config_byte(pdev, 0x57, 0xd0);        /* bit 7-4, PIRQD */
 128
 129         /* enable function 5/6, audio/modem */
 130         pci_read_config_byte(pdev, 0x85, &c);
 131         c &= ~(0x3 << 2);
 132         pci_write_config_byte(pdev, 0x85, c);
 133
 134         printk(KERN_INFO"via686b fix: ISA bridge done\n");
 135 }
 136
 137 static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
 138 {
 139         printk(KERN_INFO"via686b fix: IDE\n");
 140
 141         /* Modify IDE controller setup */
 142         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
 143         pci_write_config_byte(pdev, PCI_COMMAND,
 144                               PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 145                               PCI_COMMAND_MASTER);
 146         pci_write_config_byte(pdev, 0x40, 0x0b);
 147         /* legacy mode */
 148         pci_write_config_byte(pdev, 0x42, 0x09);
 149
 150 #if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
 151         /* disable read prefetch/write post buffers */
 152         pci_write_config_byte(pdev, 0x41, 0x02);
 153
 154         /* use 3/4 as fifo thresh hold  */
 155         pci_write_config_byte(pdev, 0x43, 0x0a);
 156         pci_write_config_byte(pdev, 0x44, 0x00);
 157
 158         pci_write_config_byte(pdev, 0x45, 0x00);
 159 #else
 160         pci_write_config_byte(pdev, 0x41, 0xc2);
 161         pci_write_config_byte(pdev, 0x43, 0x35);
 162         pci_write_config_byte(pdev, 0x44, 0x1c);
 163
 164         pci_write_config_byte(pdev, 0x45, 0x10);
 165 #endif
 166
 167         printk(KERN_INFO"via686b fix: IDE done\n");
 168 }
 169
 170 static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
 171 {
 172         /* irq routing */
 173         pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
 174 }
 175
 176 static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
 177 {
 178         /* irq routing */
 179         pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
 180 }
 181
 182 static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
 183 {
 184         unsigned int val;
 185         unsigned char c;
 186
 187         /* enable IO */
 188         pci_write_config_byte(pdev, PCI_COMMAND,
 189                               PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 190                               PCI_COMMAND_MASTER);
 191         pci_read_config_dword(pdev, 0x4, &val);
 192         pci_write_config_dword(pdev, 0x4, val | 1);
 193
 194         /* route ac97 IRQ */
 195         pci_write_config_byte(pdev, 0x3c, 9);
 196
 197         pci_read_config_byte(pdev, 0x8, &c);
 198
 199         /* link control: enable link & SGD PCM output */
 200         pci_write_config_byte(pdev, 0x41, 0xcc);
 201
 202         /* disable game port, FM, midi, sb, enable write to reg2c-2f */
 203         pci_write_config_byte(pdev, 0x42, 0x20);
 204
 205         /* we are using Avance logic codec */
 206         pci_write_config_word(pdev, 0x2c, 0x1005);
 207         pci_write_config_word(pdev, 0x2e, 0x4710);
 208         pci_read_config_dword(pdev, 0x2c, &val);
 209
 210         pci_write_config_byte(pdev, 0x42, 0x0);
 211 }
 212
 213 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
 214                          loongson2e_686b_func0_fixup);
 215 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
 216                          loongson2e_686b_func1_fixup);
 217 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
 218                          loongson2e_686b_func2_fixup);
 219 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
 220                          loongson2e_686b_func3_fixup);
 221 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
 222                          loongson2e_686b_func5_fixup);
 223 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
 224                          loongson2e_nec_fixup);